blob: 83dffbc2f62f05e1d7977931a623a2d830a0279b [file] [log] [blame]
/* $Id: mul.S,v 1.4 1996/09/30 02:22:32 davem Exp $
* mul.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
/*
* Signed multiply, from Appendix E of the Sparc Version 8
* Architecture Manual.
*/
/*
* Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the upper 32 bits of
* the 64-bit product).
*
* This code optimizes short (less than 13-bit) multiplies.
*/
.globl .mul
.mul:
mov %o0, %y ! multiplier -> Y
andncc %o0, 0xfff, %g0 ! test bits 12..31
be Lmul_shortway ! if zero, can do it the short way
andcc %g0, %g0, %o4 ! zero the partial product and clear N and V
/*
* Long multiply. 32 steps, followed by a final shift step.
*/
mulscc %o4, %o1, %o4 ! 1
mulscc %o4, %o1, %o4 ! 2
mulscc %o4, %o1, %o4 ! 3
mulscc %o4, %o1, %o4 ! 4
mulscc %o4, %o1, %o4 ! 5
mulscc %o4, %o1, %o4 ! 6
mulscc %o4, %o1, %o4 ! 7
mulscc %o4, %o1, %o4 ! 8
mulscc %o4, %o1, %o4 ! 9
mulscc %o4, %o1, %o4 ! 10
mulscc %o4, %o1, %o4 ! 11
mulscc %o4, %o1, %o4 ! 12
mulscc %o4, %o1, %o4 ! 13
mulscc %o4, %o1, %o4 ! 14
mulscc %o4, %o1, %o4 ! 15
mulscc %o4, %o1, %o4 ! 16
mulscc %o4, %o1, %o4 ! 17
mulscc %o4, %o1, %o4 ! 18
mulscc %o4, %o1, %o4 ! 19
mulscc %o4, %o1, %o4 ! 20
mulscc %o4, %o1, %o4 ! 21
mulscc %o4, %o1, %o4 ! 22
mulscc %o4, %o1, %o4 ! 23
mulscc %o4, %o1, %o4 ! 24
mulscc %o4, %o1, %o4 ! 25
mulscc %o4, %o1, %o4 ! 26
mulscc %o4, %o1, %o4 ! 27
mulscc %o4, %o1, %o4 ! 28
mulscc %o4, %o1, %o4 ! 29
mulscc %o4, %o1, %o4 ! 30
mulscc %o4, %o1, %o4 ! 31
mulscc %o4, %o1, %o4 ! 32
mulscc %o4, %g0, %o4 ! final shift
! If %o0 was negative, the result is
! (%o0 * %o1) + (%o1 << 32))
! We fix that here.
#if 0
tst %o0
bge 1f
rd %y, %o0
! %o0 was indeed negative; fix upper 32 bits of result by subtracting
! %o1 (i.e., return %o4 - %o1 in %o1).
retl
sub %o4, %o1, %o1
1:
retl
mov %o4, %o1
#else
/* Faster code adapted from tege@sics.se's code for umul.S. */
sra %o0, 31, %o2 ! make mask from sign bit
and %o1, %o2, %o2 ! %o2 = 0 or %o1, depending on sign of %o0
rd %y, %o0 ! get lower half of product
retl
sub %o4, %o2, %o1 ! subtract compensation
! and put upper half in place
#endif
Lmul_shortway:
/*
* Short multiply. 12 steps, followed by a final shift step.
* The resulting bits are off by 12 and (32-12) = 20 bit positions,
* but there is no problem with %o0 being negative (unlike above).
*/
mulscc %o4, %o1, %o4 ! 1
mulscc %o4, %o1, %o4 ! 2
mulscc %o4, %o1, %o4 ! 3
mulscc %o4, %o1, %o4 ! 4
mulscc %o4, %o1, %o4 ! 5
mulscc %o4, %o1, %o4 ! 6
mulscc %o4, %o1, %o4 ! 7
mulscc %o4, %o1, %o4 ! 8
mulscc %o4, %o1, %o4 ! 9
mulscc %o4, %o1, %o4 ! 10
mulscc %o4, %o1, %o4 ! 11
mulscc %o4, %o1, %o4 ! 12
mulscc %o4, %g0, %o4 ! final shift
/*
* %o4 has 20 of the bits that should be in the low part of the
* result; %y has the bottom 12 (as %y's top 12). That is:
*
* %o4 %y
* +----------------+----------------+
* | -12- | -20- | -12- | -20- |
* +------(---------+------)---------+
* --hi-- ----low-part----
*
* The upper 12 bits of %o4 should be sign-extended to form the
* high part of the product (i.e., highpart = %o4 >> 20).
*/
rd %y, %o5
sll %o4, 12, %o0 ! shift middle bits left 12
srl %o5, 20, %o5 ! shift low bits right 20, zero fill at left
or %o5, %o0, %o0 ! construct low part of result
retl
sra %o4, 20, %o1 ! ... and extract high part of result
.globl .mul_patch
.mul_patch:
smul %o0, %o1, %o0
retl
rd %y, %o1
nop