| #ifndef _LMC_IOCTL_H_ |
| #define _LMC_IOCTL_H_ |
| /* $Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $ */ |
| |
| /* |
| * Copyright (c) 1997-2000 LAN Media Corporation (LMC) |
| * All rights reserved. www.lanmedia.com |
| * |
| * This code is written by: |
| * Andrew Stanley-Jones (asj@cban.com) |
| * Rob Braun (bbraun@vix.com), |
| * Michael Graff (explorer@vix.com) and |
| * Matt Thomas (matt@3am-software.com). |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License version 2, incorporated herein by reference. |
| */ |
| |
| #define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */ |
| #define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */ |
| #define LMCIOCGETLMCSTATS SIOCDEVPRIVATE+5 |
| #define LMCIOCCLEARLMCSTATS SIOCDEVPRIVATE+6 |
| #define LMCIOCDUMPEVENTLOG SIOCDEVPRIVATE+7 |
| #define LMCIOCGETXINFO SIOCDEVPRIVATE+8 |
| #define LMCIOCSETCIRCUIT SIOCDEVPRIVATE+9 |
| #define LMCIOCUNUSEDATM SIOCDEVPRIVATE+10 |
| #define LMCIOCRESET SIOCDEVPRIVATE+11 |
| #define LMCIOCT1CONTROL SIOCDEVPRIVATE+12 |
| #define LMCIOCIFTYPE SIOCDEVPRIVATE+13 |
| #define LMCIOCXILINX SIOCDEVPRIVATE+14 |
| |
| #define LMC_CARDTYPE_UNKNOWN -1 |
| #define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */ |
| #define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */ |
| #define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */ |
| #define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */ |
| |
| #define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */ |
| #define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */ |
| #define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */ |
| #define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */ |
| |
| #define LMC_CTL_OFF 0 /* generic OFF value */ |
| #define LMC_CTL_ON 1 /* generic ON value */ |
| |
| #define LMC_CTL_CLOCK_SOURCE_EXT 0 /* clock off line */ |
| #define LMC_CTL_CLOCK_SOURCE_INT 1 /* internal clock */ |
| |
| #define LMC_CTL_CRC_LENGTH_16 16 |
| #define LMC_CTL_CRC_LENGTH_32 32 |
| #define LMC_CTL_CRC_BYTESIZE_2 2 |
| #define LMC_CTL_CRC_BYTESIZE_4 4 |
| |
| |
| #define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */ |
| #define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */ |
| |
| #define LMC_CTL_CIRCUIT_TYPE_E1 0 |
| #define LMC_CTL_CIRCUIT_TYPE_T1 1 |
| |
| /* |
| * IFTYPE defines |
| */ |
| #define LMC_PPP 1 /* use sppp interface */ |
| #define LMC_NET 2 /* use direct net interface */ |
| #define LMC_RAW 3 /* use direct net interface */ |
| |
| /* |
| * These are not in the least IOCTL related, but I want them common. |
| */ |
| /* |
| * assignments for the GPIO register on the DEC chip (common) |
| */ |
| #define LMC_GEP_INIT 0x01 /* 0: */ |
| #define LMC_GEP_RESET 0x02 /* 1: */ |
| #define LMC_GEP_MODE 0x10 /* 4: */ |
| #define LMC_GEP_DP 0x20 /* 5: */ |
| #define LMC_GEP_DATA 0x40 /* 6: serial out */ |
| #define LMC_GEP_CLK 0x80 /* 7: serial clock */ |
| |
| /* |
| * HSSI GPIO assignments |
| */ |
| #define LMC_GEP_HSSI_ST 0x04 /* 2: receive timing sense (deprecated) */ |
| #define LMC_GEP_HSSI_CLOCK 0x08 /* 3: clock source */ |
| |
| /* |
| * T1 GPIO assignments |
| */ |
| #define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */ |
| #define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */ |
| |
| /* |
| * Common MII16 bits |
| */ |
| #define LMC_MII16_LED0 0x0080 |
| #define LMC_MII16_LED1 0x0100 |
| #define LMC_MII16_LED2 0x0200 |
| #define LMC_MII16_LED3 0x0400 /* Error, and the red one */ |
| #define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */ |
| #define LMC_MII16_FIFO_RESET 0x0800 |
| |
| /* |
| * definitions for HSSI |
| */ |
| #define LMC_MII16_HSSI_TA 0x0001 |
| #define LMC_MII16_HSSI_CA 0x0002 |
| #define LMC_MII16_HSSI_LA 0x0004 |
| #define LMC_MII16_HSSI_LB 0x0008 |
| #define LMC_MII16_HSSI_LC 0x0010 |
| #define LMC_MII16_HSSI_TM 0x0020 |
| #define LMC_MII16_HSSI_CRC 0x0040 |
| |
| /* |
| * assignments for the MII register 16 (DS3) |
| */ |
| #define LMC_MII16_DS3_ZERO 0x0001 |
| #define LMC_MII16_DS3_TRLBK 0x0002 |
| #define LMC_MII16_DS3_LNLBK 0x0004 |
| #define LMC_MII16_DS3_RAIS 0x0008 |
| #define LMC_MII16_DS3_TAIS 0x0010 |
| #define LMC_MII16_DS3_BIST 0x0020 |
| #define LMC_MII16_DS3_DLOS 0x0040 |
| #define LMC_MII16_DS3_CRC 0x1000 |
| #define LMC_MII16_DS3_SCRAM 0x2000 |
| #define LMC_MII16_DS3_SCRAM_LARS 0x4000 |
| |
| /* Note: 2 pairs of LEDs where swapped by mistake |
| * in Xilinx code for DS3 & DS1 adapters */ |
| #define LMC_DS3_LED0 0x0100 /* bit 08 yellow */ |
| #define LMC_DS3_LED1 0x0080 /* bit 07 blue */ |
| #define LMC_DS3_LED2 0x0400 /* bit 10 green */ |
| #define LMC_DS3_LED3 0x0200 /* bit 09 red */ |
| |
| /* |
| * framer register 0 and 7 (7 is latched and reset on read) |
| */ |
| #define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */ |
| #define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */ |
| #define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */ |
| #define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */ |
| #define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */ |
| |
| /* |
| * Framer register 9 contains the blue alarm signal |
| */ |
| #define LMC_FRAMER_REG9_RBLUE 0x02 /* Blue alarm failure */ |
| |
| /* |
| * Framer register 0x10 contains xbit error |
| */ |
| #define LMC_FRAMER_REG10_XBIT 0x01 /* X bit error alarm failure */ |
| |
| /* |
| * And SSI, LMC1000 |
| */ |
| #define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */ |
| #define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */ |
| #define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */ |
| #define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */ |
| #define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */ |
| #define LMC_MII16_SSI_RI 0x0020 /* RI input RO */ |
| #define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */ |
| |
| /* |
| * bits 0x0080 through 0x0800 are generic, and described |
| * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET |
| */ |
| #define LMC_MII16_SSI_LL 0x1000 /* LL output RW */ |
| #define LMC_MII16_SSI_RL 0x2000 /* RL output RW */ |
| #define LMC_MII16_SSI_TM 0x4000 /* TM input RO */ |
| #define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */ |
| |
| /* |
| * Some of the MII16 bits are mirrored in the MII17 register as well, |
| * but let's keep thing separate for now, and get only the cable from |
| * the MII17. |
| */ |
| #define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */ |
| #define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */ |
| |
| /* |
| * And T1, LMC1200 |
| */ |
| #define LMC_MII16_T1_UNUSED1 0x0003 |
| #define LMC_MII16_T1_XOE 0x0004 |
| #define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */ |
| #define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */ |
| #define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */ |
| #define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */ |
| |
| #define LMC_MII16_T1_LED0 0x0100 |
| #define LMC_MII16_T1_LED1 0x0080 |
| #define LMC_MII16_T1_LED2 0x0400 |
| #define LMC_MII16_T1_LED3 0x0200 |
| #define LMC_MII16_T1_FIFO_RESET 0x0800 |
| |
| #define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */ |
| #define LMC_MII16_T1_UNUSED2 0xe000 |
| |
| |
| /* 8370 framer registers */ |
| |
| #define T1FRAMER_ALARM1_STATUS 0x47 |
| #define T1FRAMER_ALARM2_STATUS 0x48 |
| #define T1FRAMER_FERR_LSB 0x50 |
| #define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */ |
| #define T1FRAMER_LCV_LSB 0x54 |
| #define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */ |
| #define T1FRAMER_AERR 0x5A |
| |
| /* mask for the above AERR register */ |
| #define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */ |
| #define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */ |
| #define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */ |
| |
| /* 8370 framer register ALM1 (0x47) values |
| * used to determine link status |
| */ |
| |
| #define T1F_SIGFRZ 0x01 /* signaling freeze */ |
| #define T1F_RLOF 0x02 /* receive loss of frame alignment */ |
| #define T1F_RLOS 0x04 /* receive loss of signal */ |
| #define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */ |
| #define T1F_RAIS 0x10 /* receive alarm indication signal */ |
| #define T1F_UNUSED 0x20 |
| #define T1F_RYEL 0x40 /* receive yellow alarm */ |
| #define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */ |
| |
| #define LMC_T1F_WRITE 0 |
| #define LMC_T1F_READ 1 |
| |
| typedef struct lmc_st1f_control { |
| int command; |
| int address; |
| int value; |
| char __user *data; |
| } lmc_t1f_control; |
| |
| enum lmc_xilinx_c { |
| lmc_xilinx_reset = 1, |
| lmc_xilinx_load_prom = 2, |
| lmc_xilinx_load = 3 |
| }; |
| |
| struct lmc_xilinx_control { |
| enum lmc_xilinx_c command; |
| int len; |
| char __user *data; |
| }; |
| |
| /* ------------------ end T1 defs ------------------- */ |
| |
| #define LMC_MII_LedMask 0x0780 |
| #define LMC_MII_LedBitPos 7 |
| |
| #endif |
