blob: 37e06c782bdf029499cfe4a4a12d94c62b6c5d6e [file] [log] [blame]
/*
* linux/include/asm-arm/arch-omap/hardware.h
*
* Hardware definitions for TI OMAP processors and boards
*
* NOTE: Please put device driver specific defines into a separate header
* file for each driver.
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
*
* Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
* and Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_OMAP_HARDWARE_H
#define __ASM_ARCH_OMAP_HARDWARE_H
#include <asm/sizes.h>
#include <linux/config.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
#include <asm/arch/cpu.h>
#endif
#include <asm/arch/io.h>
/*
* ---------------------------------------------------------------------------
* Common definitions for all OMAP processors
* NOTE: Put all processor or board specific parts to the special header
* files.
* ---------------------------------------------------------------------------
*/
/*
* ----------------------------------------------------------------------------
* Clocks
* ----------------------------------------------------------------------------
*/
#define CLKGEN_REG_BASE (0xfffece00)
#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
#define CK_RATEF 1
#define CK_IDLEF 2
#define CK_ENABLEF 4
#define CK_SELECTF 8
#define SETARM_IDLE_SHIFT
/* DPLL control registers */
#define DPLL_CTL (0xfffecf00)
/* DSP clock control */
#define DSP_CONFIG_REG_BASE (0xe1008000)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
/*
* ---------------------------------------------------------------------------
* UPLD
* ---------------------------------------------------------------------------
*/
#define ULPD_REG_BASE (0xfffe0800)
#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
# define SOFT_UDC_REQ (1 << 4)
# define SOFT_USB_CLK_REQ (1 << 3)
# define SOFT_DPLL_REQ (1 << 0)
#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
# define DIS_MMC2_DPLL_REQ (1 << 11)
# define DIS_MMC1_DPLL_REQ (1 << 10)
# define DIS_UART3_DPLL_REQ (1 << 9)
# define DIS_UART2_DPLL_REQ (1 << 8)
# define DIS_UART1_DPLL_REQ (1 << 7)
# define DIS_USB_HOST_DPLL_REQ (1 << 6)
#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
/*
* ---------------------------------------------------------------------------
* Watchdog timer
* ---------------------------------------------------------------------------
*/
/* Watchdog timer within the OMAP3.2 gigacell */
#define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
/*
* ---------------------------------------------------------------------------
* Interrupts
* ---------------------------------------------------------------------------
*/
#define OMAP_IH1_BASE 0xfffecb00
#define OMAP_IH2_BASE 0xfffe0000
#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
#define IRQ_ITR_REG_OFFSET 0x00
#define IRQ_MIR_REG_OFFSET 0x04
#define IRQ_SIR_IRQ_REG_OFFSET 0x10
#define IRQ_SIR_FIQ_REG_OFFSET 0x14
#define IRQ_CONTROL_REG_OFFSET 0x18
#define IRQ_ISR_REG_OFFSET 0x9c
#define IRQ_ILR0_REG_OFFSET 0x1c
#define IRQ_GMR_REG_OFFSET 0xa0
/*
* ----------------------------------------------------------------------------
* System control registers
* ----------------------------------------------------------------------------
*/
#define MOD_CONF_CTRL_0 0xfffe1080
#define MOD_CONF_CTRL_1 0xfffe1110
/*
* ----------------------------------------------------------------------------
* Pin multiplexing registers
* ----------------------------------------------------------------------------
*/
#define FUNC_MUX_CTRL_0 0xfffe1000
#define FUNC_MUX_CTRL_1 0xfffe1004
#define FUNC_MUX_CTRL_2 0xfffe1008
#define COMP_MODE_CTRL_0 0xfffe100c
#define FUNC_MUX_CTRL_3 0xfffe1010
#define FUNC_MUX_CTRL_4 0xfffe1014
#define FUNC_MUX_CTRL_5 0xfffe1018
#define FUNC_MUX_CTRL_6 0xfffe101C
#define FUNC_MUX_CTRL_7 0xfffe1020
#define FUNC_MUX_CTRL_8 0xfffe1024
#define FUNC_MUX_CTRL_9 0xfffe1028
#define FUNC_MUX_CTRL_A 0xfffe102C
#define FUNC_MUX_CTRL_B 0xfffe1030
#define FUNC_MUX_CTRL_C 0xfffe1034
#define FUNC_MUX_CTRL_D 0xfffe1038
#define PULL_DWN_CTRL_0 0xfffe1040
#define PULL_DWN_CTRL_1 0xfffe1044
#define PULL_DWN_CTRL_2 0xfffe1048
#define PULL_DWN_CTRL_3 0xfffe104c
#define PULL_DWN_CTRL_4 0xfffe10ac
/* OMAP-1610 specific multiplexing registers */
#define FUNC_MUX_CTRL_E 0xfffe1090
#define FUNC_MUX_CTRL_F 0xfffe1094
#define FUNC_MUX_CTRL_10 0xfffe1098
#define FUNC_MUX_CTRL_11 0xfffe109c
#define FUNC_MUX_CTRL_12 0xfffe10a0
#define PU_PD_SEL_0 0xfffe10b4
#define PU_PD_SEL_1 0xfffe10b8
#define PU_PD_SEL_2 0xfffe10bc
#define PU_PD_SEL_3 0xfffe10c0
#define PU_PD_SEL_4 0xfffe10c4
/* Timer32K for 1610 and 1710*/
#define OMAP_TIMER32K_BASE 0xFFFBC400
/*
* ---------------------------------------------------------------------------
* TIPB bus interface
* ---------------------------------------------------------------------------
*/
#define TIPB_PUBLIC_CNTL_BASE 0xfffed300
#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
/*
* ----------------------------------------------------------------------------
* MPUI interface
* ----------------------------------------------------------------------------
*/
#define MPUI_BASE (0xfffec900)
#define MPUI_CTRL (MPUI_BASE + 0x0)
#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
#define MPUI_STATUS_REG (MPUI_BASE + 0x10)
#define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
/*
* ----------------------------------------------------------------------------
* LED Pulse Generator
* ----------------------------------------------------------------------------
*/
#define OMAP_LPG1_BASE 0xfffbd000
#define OMAP_LPG2_BASE 0xfffbd800
#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
#ifndef __ASSEMBLER__
/*
* ---------------------------------------------------------------------------
* Serial ports
* ---------------------------------------------------------------------------
*/
#define OMAP_UART1_BASE (unsigned char *)0xfffb0000
#define OMAP_UART2_BASE (unsigned char *)0xfffb0800
#define OMAP_UART3_BASE (unsigned char *)0xfffb9800
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define is_omap_port(p) ({int __ret = 0; \
if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
p == IO_ADDRESS(OMAP_UART2_BASE) || \
p == IO_ADDRESS(OMAP_UART3_BASE)) \
__ret = 1; \
__ret; \
})
/*
* ---------------------------------------------------------------------------
* Processor specific defines
* ---------------------------------------------------------------------------
*/
#ifdef CONFIG_ARCH_OMAP730
#include "omap730.h"
#endif
#ifdef CONFIG_ARCH_OMAP1510
#include "omap1510.h"
#endif
#ifdef CONFIG_ARCH_OMAP16XX
#include "omap16xx.h"
#endif
/*
* ---------------------------------------------------------------------------
* Board specific defines
* ---------------------------------------------------------------------------
*/
#ifdef CONFIG_MACH_OMAP_INNOVATOR
#include "board-innovator.h"
#endif
#ifdef CONFIG_MACH_OMAP_H2
#include "board-h2.h"
#endif
#ifdef CONFIG_MACH_OMAP_PERSEUS2
#include "board-perseus2.h"
#endif
#ifdef CONFIG_MACH_OMAP_H3
#include "board-h3.h"
#endif
#ifdef CONFIG_MACH_OMAP_H4
#include "board-h4.h"
#error "Support for H4 board not yet implemented."
#endif
#ifdef CONFIG_MACH_OMAP_OSK
#include "board-osk.h"
#endif
#ifdef CONFIG_MACH_VOICEBLUE
#include "board-voiceblue.h"
#endif
#ifdef CONFIG_MACH_NETSTAR
#include "board-netstar.h"
#endif
#endif /* !__ASSEMBLER__ */
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */