| // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| /* |
| * Copyright (C) 2015-2017 Intel Deutschland GmbH |
| * Copyright (C) 2018-2023 Intel Corporation |
| */ |
| #include <linux/module.h> |
| #include <linux/stringify.h> |
| #include "iwl-config.h" |
| #include "iwl-prph.h" |
| #include "fw/api/txq.h" |
| |
| /* Highest firmware API version supported */ |
| #define IWL_22000_UCODE_API_MAX 77 |
| |
| /* Lowest firmware API version supported */ |
| #define IWL_22000_UCODE_API_MIN 50 |
| |
| /* NVM versions */ |
| #define IWL_22000_NVM_VERSION 0x0a1d |
| |
| /* Memory offsets and lengths */ |
| #define IWL_22000_DCCM_OFFSET 0x800000 /* LMAC1 */ |
| #define IWL_22000_DCCM_LEN 0x10000 /* LMAC1 */ |
| #define IWL_22000_DCCM2_OFFSET 0x880000 |
| #define IWL_22000_DCCM2_LEN 0x8000 |
| #define IWL_22000_SMEM_OFFSET 0x400000 |
| #define IWL_22000_SMEM_LEN 0xD0000 |
| |
| #define IWL_QU_B_HR_B_FW_PRE "iwlwifi-Qu-b0-hr-b0" |
| #define IWL_QU_C_HR_B_FW_PRE "iwlwifi-Qu-c0-hr-b0" |
| #define IWL_QU_B_JF_B_FW_PRE "iwlwifi-Qu-b0-jf-b0" |
| #define IWL_QU_C_JF_B_FW_PRE "iwlwifi-Qu-c0-jf-b0" |
| #define IWL_QUZ_A_HR_B_FW_PRE "iwlwifi-QuZ-a0-hr-b0" |
| #define IWL_QUZ_A_JF_B_FW_PRE "iwlwifi-QuZ-a0-jf-b0" |
| #define IWL_CC_A_FW_PRE "iwlwifi-cc-a0" |
| |
| #define IWL_QU_B_HR_B_MODULE_FIRMWARE(api) \ |
| IWL_QU_B_HR_B_FW_PRE "-" __stringify(api) ".ucode" |
| #define IWL_QUZ_A_HR_B_MODULE_FIRMWARE(api) \ |
| IWL_QUZ_A_HR_B_FW_PRE "-" __stringify(api) ".ucode" |
| #define IWL_QUZ_A_JF_B_MODULE_FIRMWARE(api) \ |
| IWL_QUZ_A_JF_B_FW_PRE "-" __stringify(api) ".ucode" |
| #define IWL_QU_C_HR_B_MODULE_FIRMWARE(api) \ |
| IWL_QU_C_HR_B_FW_PRE "-" __stringify(api) ".ucode" |
| #define IWL_QU_B_JF_B_MODULE_FIRMWARE(api) \ |
| IWL_QU_B_JF_B_FW_PRE "-" __stringify(api) ".ucode" |
| #define IWL_CC_A_MODULE_FIRMWARE(api) \ |
| IWL_CC_A_FW_PRE "-" __stringify(api) ".ucode" |
| |
| static const struct iwl_base_params iwl_22000_base_params = { |
| .eeprom_size = OTP_LOW_IMAGE_SIZE_32K, |
| .num_of_queues = 512, |
| .max_tfd_queue_size = 256, |
| .shadow_ram_support = true, |
| .led_compensation = 57, |
| .wd_timeout = IWL_LONG_WD_TIMEOUT, |
| .max_event_log_size = 512, |
| .shadow_reg_enable = true, |
| .pcie_l1_allowed = true, |
| }; |
| |
| const struct iwl_ht_params iwl_22000_ht_params = { |
| .stbc = true, |
| .ldpc = true, |
| .ht40_bands = BIT(NL80211_BAND_2GHZ) | BIT(NL80211_BAND_5GHZ) | |
| BIT(NL80211_BAND_6GHZ), |
| }; |
| |
| #define IWL_DEVICE_22000_COMMON \ |
| .ucode_api_min = IWL_22000_UCODE_API_MIN, \ |
| .led_mode = IWL_LED_RF_STATE, \ |
| .nvm_hw_section_num = 10, \ |
| .non_shared_ant = ANT_B, \ |
| .dccm_offset = IWL_22000_DCCM_OFFSET, \ |
| .dccm_len = IWL_22000_DCCM_LEN, \ |
| .dccm2_offset = IWL_22000_DCCM2_OFFSET, \ |
| .dccm2_len = IWL_22000_DCCM2_LEN, \ |
| .smem_offset = IWL_22000_SMEM_OFFSET, \ |
| .smem_len = IWL_22000_SMEM_LEN, \ |
| .features = IWL_TX_CSUM_NETIF_FLAGS | NETIF_F_RXCSUM, \ |
| .apmg_not_supported = true, \ |
| .trans.mq_rx_supported = true, \ |
| .vht_mu_mimo_supported = true, \ |
| .mac_addr_from_csr = 0x380, \ |
| .ht_params = &iwl_22000_ht_params, \ |
| .nvm_ver = IWL_22000_NVM_VERSION, \ |
| .trans.rf_id = true, \ |
| .trans.gen2 = true, \ |
| .nvm_type = IWL_NVM_EXT, \ |
| .dbgc_supported = true, \ |
| .min_umac_error_event_table = 0x400000, \ |
| .d3_debug_data_base_addr = 0x401000, \ |
| .d3_debug_data_length = 60 * 1024, \ |
| .mon_smem_regs = { \ |
| .write_ptr = { \ |
| .addr = LDBG_M2S_BUF_WPTR, \ |
| .mask = LDBG_M2S_BUF_WPTR_VAL_MSK, \ |
| }, \ |
| .cycle_cnt = { \ |
| .addr = LDBG_M2S_BUF_WRAP_CNT, \ |
| .mask = LDBG_M2S_BUF_WRAP_CNT_VAL_MSK, \ |
| }, \ |
| } |
| |
| #define IWL_DEVICE_22500 \ |
| IWL_DEVICE_22000_COMMON, \ |
| .ucode_api_max = IWL_22000_UCODE_API_MAX, \ |
| .trans.device_family = IWL_DEVICE_FAMILY_22000, \ |
| .trans.base_params = &iwl_22000_base_params, \ |
| .gp2_reg_addr = 0xa02c68, \ |
| .mon_dram_regs = { \ |
| .write_ptr = { \ |
| .addr = MON_BUFF_WRPTR_VER2, \ |
| .mask = 0xffffffff, \ |
| }, \ |
| .cycle_cnt = { \ |
| .addr = MON_BUFF_CYCLE_CNT_VER2, \ |
| .mask = 0xffffffff, \ |
| }, \ |
| } |
| |
| const struct iwl_cfg_trans_params iwl_qu_trans_cfg = { |
| .mq_rx_supported = true, |
| .rf_id = true, |
| .gen2 = true, |
| .device_family = IWL_DEVICE_FAMILY_22000, |
| .base_params = &iwl_22000_base_params, |
| .integrated = true, |
| .xtal_latency = 500, |
| .ltr_delay = IWL_CFG_TRANS_LTR_DELAY_200US, |
| }; |
| |
| const struct iwl_cfg_trans_params iwl_qu_medium_latency_trans_cfg = { |
| .mq_rx_supported = true, |
| .rf_id = true, |
| .gen2 = true, |
| .device_family = IWL_DEVICE_FAMILY_22000, |
| .base_params = &iwl_22000_base_params, |
| .integrated = true, |
| .xtal_latency = 1820, |
| .ltr_delay = IWL_CFG_TRANS_LTR_DELAY_1820US, |
| }; |
| |
| const struct iwl_cfg_trans_params iwl_qu_long_latency_trans_cfg = { |
| .mq_rx_supported = true, |
| .rf_id = true, |
| .gen2 = true, |
| .device_family = IWL_DEVICE_FAMILY_22000, |
| .base_params = &iwl_22000_base_params, |
| .integrated = true, |
| .xtal_latency = 12000, |
| .low_latency_xtal = true, |
| .ltr_delay = IWL_CFG_TRANS_LTR_DELAY_2500US, |
| }; |
| |
| /* |
| * If the device doesn't support HE, no need to have that many buffers. |
| * 22000 devices can split multiple frames into a single RB, so fewer are |
| * needed; AX210 cannot (but use smaller RBs by default) - these sizes |
| * were picked according to 8 MSDUs inside 256 A-MSDUs in an A-MPDU, with |
| * additional overhead to account for processing time. |
| */ |
| #define IWL_NUM_RBDS_NON_HE 512 |
| #define IWL_NUM_RBDS_22000_HE 2048 |
| |
| /* |
| * All JF radio modules are part of the 9000 series, but the MAC part |
| * looks more like 22000. That's why this device is here, but called |
| * 9560 nevertheless. |
| */ |
| const struct iwl_cfg iwl9560_qu_b0_jf_b0_cfg = { |
| .fw_name_pre = IWL_QU_B_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| .num_rbds = IWL_NUM_RBDS_NON_HE, |
| }; |
| |
| const struct iwl_cfg iwl9560_qu_c0_jf_b0_cfg = { |
| .fw_name_pre = IWL_QU_C_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| .num_rbds = IWL_NUM_RBDS_NON_HE, |
| }; |
| |
| const struct iwl_cfg iwl9560_quz_a0_jf_b0_cfg = { |
| .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_NON_HE, |
| }; |
| |
| const struct iwl_cfg_trans_params iwl_ax200_trans_cfg = { |
| .device_family = IWL_DEVICE_FAMILY_22000, |
| .base_params = &iwl_22000_base_params, |
| .mq_rx_supported = true, |
| .rf_id = true, |
| .gen2 = true, |
| .bisr_workaround = 1, |
| }; |
| |
| const char iwl_ax101_name[] = "Intel(R) Wi-Fi 6 AX101"; |
| const char iwl_ax200_name[] = "Intel(R) Wi-Fi 6 AX200 160MHz"; |
| const char iwl_ax201_name[] = "Intel(R) Wi-Fi 6 AX201 160MHz"; |
| const char iwl_ax203_name[] = "Intel(R) Wi-Fi 6 AX203"; |
| const char iwl_ax204_name[] = "Intel(R) Wi-Fi 6 AX204 160MHz"; |
| |
| const char iwl_ax200_killer_1650w_name[] = |
| "Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)"; |
| const char iwl_ax200_killer_1650x_name[] = |
| "Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)"; |
| const char iwl_ax201_killer_1650s_name[] = |
| "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)"; |
| const char iwl_ax201_killer_1650i_name[] = |
| "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)"; |
| |
| const struct iwl_cfg iwl_qu_b0_hr1_b0 = { |
| .fw_name_pre = IWL_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .tx_with_siso_diversity = true, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_qu_b0_hr_b0 = { |
| .fw_name_pre = IWL_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax201_cfg_qu_hr = { |
| .name = "Intel(R) Wi-Fi 6 AX201 160MHz", |
| .fw_name_pre = IWL_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_qu_c0_hr1_b0 = { |
| .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .tx_with_siso_diversity = true, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_qu_c0_hr_b0 = { |
| .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax201_cfg_qu_c0_hr_b0 = { |
| .name = "Intel(R) Wi-Fi 6 AX201 160MHz", |
| .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_quz_a0_hr1_b0 = { |
| .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .tx_with_siso_diversity = true, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax201_cfg_quz_hr = { |
| .name = "Intel(R) Wi-Fi 6 AX201 160MHz", |
| .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax1650s_cfg_quz_hr = { |
| .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)", |
| .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax1650i_cfg_quz_hr = { |
| .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)", |
| .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_ax200_cfg_cc = { |
| .fw_name_pre = IWL_CC_A_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0 = { |
| .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201NGW)", |
| .fw_name_pre = IWL_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0 = { |
| .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201D2W)", |
| .fw_name_pre = IWL_QU_B_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0 = { |
| .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201NGW)", |
| .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0 = { |
| .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201D2W)", |
| .fw_name_pre = IWL_QU_C_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| const struct iwl_cfg iwl_cfg_quz_a0_hr_b0 = { |
| .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE, |
| IWL_DEVICE_22500, |
| /* |
| * This device doesn't support receiving BlockAck with a large bitmap |
| * so we need to restrict the size of transmitted aggregation to the |
| * HT size; mac80211 would otherwise pick the HE max (256) by default. |
| */ |
| .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT, |
| .num_rbds = IWL_NUM_RBDS_22000_HE, |
| }; |
| |
| MODULE_FIRMWARE(IWL_QU_B_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_QU_C_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_QU_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_QUZ_A_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_QUZ_A_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
| MODULE_FIRMWARE(IWL_CC_A_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX)); |
