blob: d42c897cb85e59231b716b3ec5b9baa8c3f8c270 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) Overkiz SAS 2012
*
* Author: Boris BREZILLON <b.brezillon@overkiz.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <soc/at91/atmel_tcb.h>
#define NPWM 2
#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \
ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)
#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \
ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)
struct atmel_tcb_pwm_device {
unsigned div; /* PWM clock divider */
unsigned duty; /* PWM duty expressed in clk cycles */
unsigned period; /* PWM period expressed in clk cycles */
};
struct atmel_tcb_channel {
u32 enabled;
u32 cmr;
u32 ra;
u32 rb;
u32 rc;
};
struct atmel_tcb_pwm_chip {
struct pwm_chip chip;
spinlock_t lock;
u8 channel;
u8 width;
struct regmap *regmap;
struct clk *clk;
struct clk *gclk;
struct clk *slow_clk;
struct atmel_tcb_pwm_device pwms[NPWM];
struct atmel_tcb_channel bkup;
};
static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };
static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
{
return container_of(chip, struct atmel_tcb_pwm_chip, chip);
}
static int atmel_tcb_pwm_request(struct pwm_chip *chip,
struct pwm_device *pwm)
{
struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
unsigned cmr;
int ret;
ret = clk_prepare_enable(tcbpwmc->clk);
if (ret)
return ret;
tcbpwm->duty = 0;
tcbpwm->period = 0;
tcbpwm->div = 0;
spin_lock(&tcbpwmc->lock);
regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
/*
* Get init config from Timer Counter registers if
* Timer Counter is already configured as a PWM generator.
*/
if (cmr & ATMEL_TC_WAVE) {
if (pwm->hwpwm == 0)
regmap_read(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, RA),
&tcbpwm->duty);
else
regmap_read(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, RB),
&tcbpwm->duty);
tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
&tcbpwm->period);
cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
ATMEL_TC_BCMR_MASK);
} else
cmr = 0;
cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
spin_unlock(&tcbpwmc->lock);
return 0;
}
static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
clk_disable_unprepare(tcbpwmc->clk);
}
static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
unsigned cmr;
/*
* If duty is 0 the timer will be stopped and we have to
* configure the output correctly on software trigger:
* - set output to high if PWM_POLARITY_INVERSED
* - set output to low if PWM_POLARITY_NORMAL
*
* This is why we're reverting polarity in this case.
*/
if (tcbpwm->duty == 0)
polarity = !polarity;
spin_lock(&tcbpwmc->lock);
regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
/* flush old setting and set the new one */
if (pwm->hwpwm == 0) {
cmr &= ~ATMEL_TC_ACMR_MASK;
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_ASWTRG_CLEAR;
else
cmr |= ATMEL_TC_ASWTRG_SET;
} else {
cmr &= ~ATMEL_TC_BCMR_MASK;
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_BSWTRG_CLEAR;
else
cmr |= ATMEL_TC_BSWTRG_SET;
}
regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
/*
* Use software trigger to apply the new setting.
* If both PWM devices in this group are disabled we stop the clock.
*/
if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
regmap_write(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, CCR),
ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
tcbpwmc->bkup.enabled = 1;
} else {
regmap_write(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, CCR),
ATMEL_TC_SWTRG);
tcbpwmc->bkup.enabled = 0;
}
spin_unlock(&tcbpwmc->lock);
}
static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
u32 cmr;
/*
* If duty is 0 the timer will be stopped and we have to
* configure the output correctly on software trigger:
* - set output to high if PWM_POLARITY_INVERSED
* - set output to low if PWM_POLARITY_NORMAL
*
* This is why we're reverting polarity in this case.
*/
if (tcbpwm->duty == 0)
polarity = !polarity;
spin_lock(&tcbpwmc->lock);
regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
/* flush old setting and set the new one */
cmr &= ~ATMEL_TC_TCCLKS;
if (pwm->hwpwm == 0) {
cmr &= ~ATMEL_TC_ACMR_MASK;
/* Set CMR flags according to given polarity */
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_ASWTRG_CLEAR;
else
cmr |= ATMEL_TC_ASWTRG_SET;
} else {
cmr &= ~ATMEL_TC_BCMR_MASK;
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_BSWTRG_CLEAR;
else
cmr |= ATMEL_TC_BSWTRG_SET;
}
/*
* If duty is 0 or equal to period there's no need to register
* a specific action on RA/RB and RC compare.
* The output will be configured on software trigger and keep
* this config till next config call.
*/
if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
if (pwm->hwpwm == 0) {
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
else
cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
} else {
if (polarity == PWM_POLARITY_INVERSED)
cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
else
cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
}
}
cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);
regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);
if (pwm->hwpwm == 0)
regmap_write(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, RA),
tcbpwm->duty);
else
regmap_write(tcbpwmc->regmap,
ATMEL_TC_REG(tcbpwmc->channel, RB),
tcbpwm->duty);
regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
tcbpwm->period);
/* Use software trigger to apply the new setting */
regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
tcbpwmc->bkup.enabled = 1;
spin_unlock(&tcbpwmc->lock);
return 0;
}
static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
struct atmel_tcb_pwm_device *atcbpwm = NULL;
int i = 0;
int slowclk = 0;
unsigned period;
unsigned duty;
unsigned rate = clk_get_rate(tcbpwmc->clk);
unsigned long long min;
unsigned long long max;
/*
* Find best clk divisor:
* the smallest divisor which can fulfill the period_ns requirements.
* If there is a gclk, the first divisor is actually the gclk selector
*/
if (tcbpwmc->gclk)
i = 1;
for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
if (atmel_tcb_divisors[i] == 0) {
slowclk = i;
continue;
}
min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
max = min << tcbpwmc->width;
if (max >= period_ns)
break;
}
/*
* If none of the divisor are small enough to represent period_ns
* take slow clock (32KHz).
*/
if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
i = slowclk;
rate = clk_get_rate(tcbpwmc->slow_clk);
min = div_u64(NSEC_PER_SEC, rate);
max = min << tcbpwmc->width;
/* If period is too big return ERANGE error */
if (max < period_ns)
return -ERANGE;
}
duty = div_u64(duty_ns, min);
period = div_u64(period_ns, min);
if (pwm->hwpwm == 0)
atcbpwm = &tcbpwmc->pwms[1];
else
atcbpwm = &tcbpwmc->pwms[0];
/*
* PWM devices provided by the TCB driver are grouped by 2.
* PWM devices in a given group must be configured with the
* same period_ns.
*
* We're checking the period value of the second PWM device
* in this group before applying the new config.
*/
if ((atcbpwm && atcbpwm->duty > 0 &&
atcbpwm->duty != atcbpwm->period) &&
(atcbpwm->div != i || atcbpwm->period != period)) {
dev_err(chip->dev,
"failed to configure period_ns: PWM group already configured with a different value\n");
return -EINVAL;
}
tcbpwm->period = period;
tcbpwm->div = i;
tcbpwm->duty = duty;
return 0;
}
static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
int duty_cycle, period;
int ret;
if (!state->enabled) {
atmel_tcb_pwm_disable(chip, pwm, state->polarity);
return 0;
}
period = state->period < INT_MAX ? state->period : INT_MAX;
duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;
ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
if (ret)
return ret;
return atmel_tcb_pwm_enable(chip, pwm, state->polarity);
}
static const struct pwm_ops atmel_tcb_pwm_ops = {
.request = atmel_tcb_pwm_request,
.free = atmel_tcb_pwm_free,
.apply = atmel_tcb_pwm_apply,
};
static struct atmel_tcb_config tcb_rm9200_config = {
.counter_width = 16,
};
static struct atmel_tcb_config tcb_sam9x5_config = {
.counter_width = 32,
};
static struct atmel_tcb_config tcb_sama5d2_config = {
.counter_width = 32,
.has_gclk = 1,
};
static const struct of_device_id atmel_tcb_of_match[] = {
{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
{ /* sentinel */ }
};
static int atmel_tcb_pwm_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct atmel_tcb_pwm_chip *tcbpwm;
const struct atmel_tcb_config *config;
struct device_node *np = pdev->dev.of_node;
char clk_name[] = "t0_clk";
int err;
int channel;
tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
if (tcbpwm == NULL)
return -ENOMEM;
err = of_property_read_u32(np, "reg", &channel);
if (err < 0) {
dev_err(&pdev->dev,
"failed to get Timer Counter Block channel from device tree (error: %d)\n",
err);
return err;
}
tcbpwm->regmap = syscon_node_to_regmap(np->parent);
if (IS_ERR(tcbpwm->regmap))
return PTR_ERR(tcbpwm->regmap);
tcbpwm->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
if (IS_ERR(tcbpwm->slow_clk))
return PTR_ERR(tcbpwm->slow_clk);
clk_name[1] += channel;
tcbpwm->clk = of_clk_get_by_name(np->parent, clk_name);
if (IS_ERR(tcbpwm->clk))
tcbpwm->clk = of_clk_get_by_name(np->parent, "t0_clk");
if (IS_ERR(tcbpwm->clk)) {
err = PTR_ERR(tcbpwm->clk);
goto err_slow_clk;
}
match = of_match_node(atmel_tcb_of_match, np->parent);
config = match->data;
if (config->has_gclk) {
tcbpwm->gclk = of_clk_get_by_name(np->parent, "gclk");
if (IS_ERR(tcbpwm->gclk)) {
err = PTR_ERR(tcbpwm->gclk);
goto err_clk;
}
}
tcbpwm->chip.dev = &pdev->dev;
tcbpwm->chip.ops = &atmel_tcb_pwm_ops;
tcbpwm->chip.npwm = NPWM;
tcbpwm->channel = channel;
tcbpwm->width = config->counter_width;
err = clk_prepare_enable(tcbpwm->slow_clk);
if (err)
goto err_gclk;
spin_lock_init(&tcbpwm->lock);
err = pwmchip_add(&tcbpwm->chip);
if (err < 0)
goto err_disable_clk;
platform_set_drvdata(pdev, tcbpwm);
return 0;
err_disable_clk:
clk_disable_unprepare(tcbpwm->slow_clk);
err_gclk:
clk_put(tcbpwm->gclk);
err_clk:
clk_put(tcbpwm->clk);
err_slow_clk:
clk_put(tcbpwm->slow_clk);
return err;
}
static void atmel_tcb_pwm_remove(struct platform_device *pdev)
{
struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
pwmchip_remove(&tcbpwm->chip);
clk_disable_unprepare(tcbpwm->slow_clk);
clk_put(tcbpwm->gclk);
clk_put(tcbpwm->clk);
clk_put(tcbpwm->slow_clk);
}
static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
{ .compatible = "atmel,tcb-pwm", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);
static int atmel_tcb_pwm_suspend(struct device *dev)
{
struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
struct atmel_tcb_channel *chan = &tcbpwm->bkup;
unsigned int channel = tcbpwm->channel;
regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
regmap_read(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);
return 0;
}
static int atmel_tcb_pwm_resume(struct device *dev)
{
struct atmel_tcb_pwm_chip *tcbpwm = dev_get_drvdata(dev);
struct atmel_tcb_channel *chan = &tcbpwm->bkup;
unsigned int channel = tcbpwm->channel;
regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
regmap_write(tcbpwm->regmap, ATMEL_TC_REG(channel, RC), chan->rc);
if (chan->enabled)
regmap_write(tcbpwm->regmap,
ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
ATMEL_TC_REG(channel, CCR));
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
atmel_tcb_pwm_resume);
static struct platform_driver atmel_tcb_pwm_driver = {
.driver = {
.name = "atmel-tcb-pwm",
.of_match_table = atmel_tcb_pwm_dt_ids,
.pm = pm_ptr(&atmel_tcb_pwm_pm_ops),
},
.probe = atmel_tcb_pwm_probe,
.remove_new = atmel_tcb_pwm_remove,
};
module_platform_driver(atmel_tcb_pwm_driver);
MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
MODULE_LICENSE("GPL v2");