Merge branch 'linus' into x86/cleanups
diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt
index b89b6d2..efce750 100644
--- a/Documentation/x86_64/mm.txt
+++ b/Documentation/x86_64/mm.txt
@@ -11,9 +11,8 @@
ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
... unused hole ...
-ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0
-... unused hole ...
-ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space
+ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
+ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
The direct mapping covers all memory in the system up to the highest
memory address (this means in some cases it can also include PCI memory
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d8819ef..1d5dff4 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -30,6 +30,7 @@
#include <asm/page.h>
#include <asm/boot.h>
#include <asm/msr.h>
+#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>
.section ".text.head"
@@ -109,7 +110,7 @@
/* Enable PAE mode */
xorl %eax, %eax
- orl $(1 << 5), %eax
+ orl $(X86_CR4_PAE), %eax
movl %eax, %cr4
/*
@@ -170,7 +171,7 @@
pushl %eax
/* Enter paged protected Mode, activating Long Mode */
- movl $0x80000001, %eax /* Enable Paging and Protected mode */
+ movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */
movl %eax, %cr0
/* Jump from 32bit compatibility mode into 64bit mode. */
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 40ecb8d..b939cb4 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -259,8 +259,7 @@
return mode_count[adapter];
}
-__videocard video_vga =
-{
+__videocard video_vga = {
.card_name = "VGA",
.probe = vga_probe,
.set_mode = vga_set_mode,
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index b5e329d..3aefbce 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -370,13 +370,11 @@
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx
- PTREGSCALL stub32_sigsuspend, sys32_sigsuspend, %rcx
PTREGSCALL stub32_execve, sys32_execve, %rcx
PTREGSCALL stub32_fork, sys_fork, %rdi
PTREGSCALL stub32_clone, sys32_clone, %rdx
PTREGSCALL stub32_vfork, sys_vfork, %rdi
PTREGSCALL stub32_iopl, sys_iopl, %rsi
- PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx
ENTRY(ia32_ptregs_common)
popq %r11
@@ -476,7 +474,7 @@
.quad sys_ssetmask
.quad sys_setreuid16 /* 70 */
.quad sys_setregid16
- .quad stub32_sigsuspend
+ .quad sys32_sigsuspend
.quad compat_sys_sigpending
.quad sys_sethostname
.quad compat_sys_setrlimit /* 75 */
@@ -583,7 +581,7 @@
.quad sys32_rt_sigpending
.quad compat_sys_rt_sigtimedwait
.quad sys32_rt_sigqueueinfo
- .quad stub32_rt_sigsuspend
+ .quad sys_rt_sigsuspend
.quad sys32_pread /* 180 */
.quad sys32_pwrite
.quad sys_chown16
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 170d2f5..1b1c56b 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -59,8 +59,12 @@
return;
}
-/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */
- /* Test for the divl bug.. */
+ /*
+ * trap_init() enabled FXSR and company _before_ testing for FP
+ * problems here.
+ *
+ * Test for the divl bug..
+ */
__asm__("fninit\n\t"
"fldl %1\n\t"
"fdivl %2\n\t"
@@ -108,10 +112,15 @@
"movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
: "=&a" (res)
: "d" (inp)
- : "ecx", "edi" );
- /* If this fails, it means that any user program may lock the CPU hard. Too bad. */
- if (res != 12345678) printk( "Buggy.\n" );
- else printk( "OK.\n" );
+ : "ecx", "edi");
+ /*
+ * If this fails, it means that any user program may lock the
+ * CPU hard. Too bad.
+ */
+ if (res != 12345678)
+ printk("Buggy.\n");
+ else
+ printk("OK.\n");
#endif
}
@@ -137,7 +146,8 @@
* i486+ only features! (WP works in supervisor mode and the
* new "invlpg" and "bswap" instructions)
*/
-#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP)
+#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \
+ defined(CONFIG_X86_BSWAP)
if (boot_cpu_data.x86 == 3)
panic("Kernel requires i486+ for 'invlpg' and other features");
#endif
@@ -170,6 +180,7 @@
check_fpu();
check_hlt();
check_popad();
- init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
+ init_utsname()->machine[1] =
+ '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86);
alternative_instructions();
}
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index f03e9153..965ea52 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -26,9 +26,10 @@
#define NFORCE2_SAFE_DISTANCE 50
/* Delay in ms between FSB changes */
-//#define NFORCE2_DELAY 10
+/* #define NFORCE2_DELAY 10 */
-/* nforce2_chipset:
+/*
+ * nforce2_chipset:
* FSB is changed using the chipset
*/
static struct pci_dev *nforce2_chipset_dev;
@@ -36,13 +37,13 @@
/* fid:
* multiplier * 10
*/
-static int fid = 0;
+static int fid;
/* min_fsb, max_fsb:
* minimum and maximum FSB (= FSB at boot time)
*/
-static int min_fsb = 0;
-static int max_fsb = 0;
+static int min_fsb;
+static int max_fsb;
MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
@@ -53,7 +54,7 @@
MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
MODULE_PARM_DESC(min_fsb,
- "Minimum FSB to use, if not defined: current FSB - 50");
+ "Minimum FSB to use, if not defined: current FSB - 50");
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
@@ -139,7 +140,7 @@
/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
- 0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
+ 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
if (!nforce2_sub5)
return 0;
@@ -147,13 +148,13 @@
fsb /= 1000000;
/* Check if PLL register is already set */
- pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+ pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
- if(bootfsb || !temp)
+ if (bootfsb || !temp)
return fsb;
-
+
/* Use PLL register FSB value */
- pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
+ pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
fsb = nforce2_calc_fsb(temp);
return fsb;
@@ -184,7 +185,7 @@
}
/* First write? Then set actual value */
- pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+ pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
if (!temp) {
pll = nforce2_calc_pll(tfsb);
@@ -210,7 +211,8 @@
tfsb--;
/* Calculate the PLL reg. value */
- if ((pll = nforce2_calc_pll(tfsb)) == -1)
+ pll = nforce2_calc_pll(tfsb);
+ if (pll == -1)
return -EINVAL;
nforce2_write_pll(pll);
@@ -249,7 +251,7 @@
static int nforce2_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
-// unsigned long flags;
+/* unsigned long flags; */
struct cpufreq_freqs freqs;
unsigned int target_fsb;
@@ -271,17 +273,17 @@
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* Disable IRQs */
- //local_irq_save(flags);
+ /* local_irq_save(flags); */
if (nforce2_set_fsb(target_fsb) < 0)
printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
- target_fsb);
+ target_fsb);
else
dprintk("Changed FSB successfully to %d\n",
- target_fsb);
+ target_fsb);
/* Enable IRQs */
- //local_irq_restore(flags);
+ /* local_irq_restore(flags); */
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
@@ -302,8 +304,8 @@
policy->max = (fsb_pol_max + 1) * fid * 100;
cpufreq_verify_within_limits(policy,
- policy->cpuinfo.min_freq,
- policy->cpuinfo.max_freq);
+ policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
return 0;
}
@@ -347,7 +349,7 @@
/* Set maximum FSB to FSB at boot time */
max_fsb = nforce2_fsb_read(1);
- if(!max_fsb)
+ if (!max_fsb)
return -EIO;
if (!min_fsb)
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
index e633c9c..f390c9f 100644
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ b/arch/x86/kernel/cpu/mcheck/k7.c
@@ -9,23 +9,23 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
#include "mce.h"
/* Machine Check Handler For AMD Athlon/Duron */
-static void k7_machine_check(struct pt_regs * regs, long error_code)
+static void k7_machine_check(struct pt_regs *regs, long error_code)
{
- int recover=1;
+ int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int i;
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
+ recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
@@ -60,12 +60,12 @@
}
if (recover&2)
- panic ("CPU context corrupt");
+ panic("CPU context corrupt");
if (recover&1)
- panic ("Unable to continue");
- printk (KERN_EMERG "Attempting to continue.\n");
+ panic("Unable to continue");
+ printk(KERN_EMERG "Attempting to continue.\n");
mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+ wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
@@ -81,25 +81,25 @@
machine_check_vector = k7_machine_check;
wmb();
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
+ printk(KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
- wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+ wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/* Clear status for MC index 0 separately, we don't touch CTL,
* as some K7 Athlons cause spurious MCEs when its enabled. */
if (boot_cpu_data.x86 == 6) {
- wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
+ wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
i = 1;
} else
i = 0;
- for (; i<nr_mce_banks; i++) {
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ for (; i < nr_mce_banks; i++) {
+ wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ set_in_cr4(X86_CR4_MCE);
+ printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index cb03345..eef001a 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -8,7 +8,7 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
#include <asm/apic.h>
@@ -32,12 +32,12 @@
/* u32 *reserved[]; */
};
-static int mce_num_extended_msrs = 0;
+static int mce_num_extended_msrs;
#ifdef CONFIG_X86_MCE_P4THERMAL
static void unexpected_thermal_interrupt(struct pt_regs *regs)
-{
+{
printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n",
smp_processor_id());
add_taint(TAINT_MACHINE_CHECK);
@@ -83,7 +83,7 @@
* be some SMM goo which handles it, so we can't even put a handler
* since it might be delivered via SMI already -zwanem.
*/
- rdmsr (MSR_IA32_MISC_ENABLE, l, h);
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
h = apic_read(APIC_LVTTHMR);
if ((l & (1<<3)) && (h & APIC_DM_SMI)) {
printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n",
@@ -91,7 +91,7 @@
return; /* -EBUSY */
}
- /* check whether a vector already exists, temporarily masked? */
+ /* check whether a vector already exists, temporarily masked? */
if (h & APIC_VECTOR_MASK) {
printk(KERN_DEBUG "CPU%d: Thermal LVT vector (%#x) already "
"installed\n",
@@ -104,18 +104,18 @@
h |= (APIC_DM_FIXED | APIC_LVT_MASKED); /* we'll mask till we're ready */
apic_write_around(APIC_LVTTHMR, h);
- rdmsr (MSR_IA32_THERM_INTERRUPT, l, h);
- wrmsr (MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
/* ok we're good to go... */
vendor_thermal_interrupt = intel_thermal_interrupt;
-
- rdmsr (MSR_IA32_MISC_ENABLE, l, h);
- wrmsr (MSR_IA32_MISC_ENABLE, l | (1<<3), h);
- l = apic_read (APIC_LVTTHMR);
- apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
- printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
+
+ l = apic_read(APIC_LVTTHMR);
+ apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+ printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
/* enable thermal throttle processing */
atomic_set(&therm_throt_en, 1);
@@ -129,28 +129,28 @@
{
u32 h;
- rdmsr (MSR_IA32_MCG_EAX, r->eax, h);
- rdmsr (MSR_IA32_MCG_EBX, r->ebx, h);
- rdmsr (MSR_IA32_MCG_ECX, r->ecx, h);
- rdmsr (MSR_IA32_MCG_EDX, r->edx, h);
- rdmsr (MSR_IA32_MCG_ESI, r->esi, h);
- rdmsr (MSR_IA32_MCG_EDI, r->edi, h);
- rdmsr (MSR_IA32_MCG_EBP, r->ebp, h);
- rdmsr (MSR_IA32_MCG_ESP, r->esp, h);
- rdmsr (MSR_IA32_MCG_EFLAGS, r->eflags, h);
- rdmsr (MSR_IA32_MCG_EIP, r->eip, h);
+ rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
+ rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
+ rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
+ rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
+ rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
+ rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
+ rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
+ rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
+ rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
+ rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
}
-static void intel_machine_check(struct pt_regs * regs, long error_code)
+static void intel_machine_check(struct pt_regs *regs, long error_code)
{
- int recover=1;
+ int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int i;
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
+ recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
@@ -191,20 +191,20 @@
}
if (recover & 2)
- panic ("CPU context corrupt");
+ panic("CPU context corrupt");
if (recover & 1)
- panic ("Unable to continue");
+ panic("Unable to continue");
printk(KERN_EMERG "Attempting to continue.\n");
- /*
- * Do not clear the MSR_IA32_MCi_STATUS if the error is not
+ /*
+ * Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
* for errors if the OS could not log the error.
*/
- for (i=0; i<nr_mce_banks; i++) {
+ for (i = 0; i < nr_mce_banks; i++) {
u32 msr;
msr = MSR_IA32_MC0_STATUS+i*4;
- rdmsr (msr, low, high);
+ rdmsr(msr, low, high);
if (high&(1<<31)) {
/* Clear it */
wrmsr(msr, 0UL, 0UL);
@@ -214,7 +214,7 @@
}
}
mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+ wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
@@ -222,30 +222,30 @@
{
u32 l, h;
int i;
-
+
machine_check_vector = intel_machine_check;
wmb();
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
+ printk(KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
- wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
+ wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
- for (i=0; i<nr_mce_banks; i++) {
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ for (i = 0; i < nr_mce_banks; i++) {
+ wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ set_in_cr4(X86_CR4_MCE);
+ printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
/* Check for P4/Xeon extended MCE MSRs */
- rdmsr (MSR_IA32_MCG_CAP, l, h);
+ rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<9)) {/* MCG_EXT_P */
mce_num_extended_msrs = (l >> 16) & 0xff;
- printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
+ printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
" available\n",
smp_processor_id(), mce_num_extended_msrs);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 556a8df5..5cf0aa9 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -420,7 +420,6 @@
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
- PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
PTREGSCALL stub_iopl, sys_iopl, %rsi
@@ -1120,10 +1119,6 @@
zeroentry do_coprocessor_segment_overrun
END(coprocessor_segment_overrun)
-ENTRY(reserved)
- zeroentry do_reserved
-END(reserved)
-
/* runs on exception stack */
ENTRY(double_fault)
XCPT_FRAME
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 10a1955..d8ed325 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -18,6 +18,7 @@
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
+#include <asm/processor-flags.h>
#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
@@ -154,9 +155,7 @@
*/
/* Enable PAE mode and PGE */
- xorq %rax, %rax
- btsq $5, %rax
- btsq $7, %rax
+ movl $(X86_CR4_PAE | X86_CR4_PGE), %eax
movq %rax, %cr4
/* Setup early boot stage 4 level pagetables. */
@@ -184,14 +183,10 @@
1: wrmsr /* Make changes effective */
/* Setup cr0 */
-#define CR0_PM 1 /* protected mode */
-#define CR0_MP (1<<1)
-#define CR0_ET (1<<4)
-#define CR0_NE (1<<5)
-#define CR0_WP (1<<16)
-#define CR0_AM (1<<18)
-#define CR0_PAGING (1<<31)
- movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
+#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
+ X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
+ X86_CR0_PG)
+ movl $CR0_STATE, %eax
/* Make changes effective */
movq %rax, %cr0
@@ -327,11 +322,11 @@
ENTRY(name)
/* Automate the creation of 1 to 1 mapping pmd entries */
-#define PMDS(START, PERM, COUNT) \
- i = 0 ; \
- .rept (COUNT) ; \
- .quad (START) + (i << 21) + (PERM) ; \
- i = i + 1 ; \
+#define PMDS(START, PERM, COUNT) \
+ i = 0 ; \
+ .rept (COUNT) ; \
+ .quad (START) + (i << PMD_SHIFT) + (PERM) ; \
+ i = i + 1 ; \
.endr
/*
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4dc8600d9..3808b7f 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -1489,6 +1489,7 @@
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
+ v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v,
GET_APIC_ID(read_apic_id()));
v = apic_read(APIC_LVR);
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index ef1a8df..c7c6b00 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -1077,6 +1077,7 @@
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
+ v = apic_read(APIC_ID);
printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index c0df7b8..9d98cda 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -8,7 +8,6 @@
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/cache.h>
-#include <linux/interrupt.h>
#include <linux/cpu.h>
#include <linux/module.h>
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index d0b234c..f496017 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -39,7 +39,7 @@
curidt.address = (unsigned long)newidt;
load_idt(&curidt);
-};
+}
static void set_gdt(void *newgdt, __u16 limit)
@@ -51,7 +51,7 @@
curgdt.address = (unsigned long)newgdt;
load_gdt(&curgdt);
-};
+}
static void load_segments(void)
{
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index edc5fbf..fdfdc55 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -12,6 +12,7 @@
#include <asm/io.h>
#include <asm/msr.h>
#include <asm/acpi.h>
+#include <asm/mmconfig.h>
#include "../pci/pci.h"
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index dc00a13..3cc36b8 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -357,7 +357,7 @@
EXPORT_SYMBOL(dma_supported);
/* Allocate DMA memory on node near device */
-noinline struct page *
+static noinline struct page *
dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
{
int node;
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f6be7d5..f8a6216 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -27,7 +27,7 @@
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
-static long no_idt[3];
+static const struct desc_ptr no_idt = {};
static int reboot_mode;
enum reboot_type reboot_type = BOOT_KBD;
int reboot_force;
@@ -201,15 +201,15 @@
controller to pulse the CPU reset line, which is more thorough, but
doesn't work with at least one type of 486 motherboard. It is easy
to stop this code working; hence the copious comments. */
-static unsigned long long
+static const unsigned long long
real_mode_gdt_entries [3] =
{
0x0000000000000000ULL, /* Null descriptor */
- 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */
- 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */
+ 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */
+ 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */
};
-static struct desc_ptr
+static const struct desc_ptr
real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries },
real_mode_idt = { 0x3ff, 0 };
@@ -231,7 +231,7 @@
More could be done here to set up the registers as if a CPU reset had
occurred; hopefully real BIOSs don't assume much. */
-static unsigned char real_mode_switch [] =
+static const unsigned char real_mode_switch [] =
{
0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */
0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */
@@ -245,7 +245,7 @@
0x24, 0x10, /* f: andb $0x10,al */
0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */
};
-static unsigned char jump_to_bios [] =
+static const unsigned char jump_to_bios [] =
{
0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */
};
@@ -255,7 +255,7 @@
* specified by the code and length parameters.
* We assume that length will aways be less that 100!
*/
-void machine_real_restart(unsigned char *code, int length)
+void machine_real_restart(const unsigned char *code, int length)
{
local_irq_disable();
@@ -368,7 +368,7 @@
}
case BOOT_TRIPLE:
- load_idt((const struct desc_ptr *)&no_idt);
+ load_idt(&no_idt);
__asm__ __volatile__("int3");
reboot_type = BOOT_KBD;
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index dec0b5e..61a8377 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -49,7 +49,7 @@
void (*reboot_fixup)(struct pci_dev *);
};
-static struct device_fixup fixups_table[] = {
+static const struct device_fixup fixups_table[] = {
{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
@@ -64,7 +64,7 @@
*/
void mach_reboot_fixups(void)
{
- struct device_fixup *cur;
+ const struct device_fixup *cur;
struct pci_dev *dev;
int i;
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 6dff128..78c1be6 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -71,6 +71,7 @@
#include <asm/topology.h>
#include <asm/trampoline.h>
#include <asm/pat.h>
+#include <asm/mmconfig.h>
#include <mach_apic.h>
#ifdef CONFIG_PARAVIRT
@@ -118,7 +119,7 @@
extern int root_mountflags;
-char __initdata command_line[COMMAND_LINE_SIZE];
+static char __initdata command_line[COMMAND_LINE_SIZE];
static struct resource standard_io_resources[] = {
{ .name = "dma1", .start = 0x00, .end = 0x1f,
@@ -293,18 +294,6 @@
}
}
-#ifdef CONFIG_PCI_MMCONFIG
-extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
-#else
-void __cpuinit fam10h_check_enable_mmcfg(void)
-{
-}
-void __init check_enable_amd_mmconf_dmi(void)
-{
-}
-#endif
-
/*
* setup_arch - architecture-specific boot-time initializations
*
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 56078d6..fd933b5 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -59,7 +59,6 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mtrr.h>
-#include <asm/nmi.h>
#include <asm/vmi.h>
#include <asm/genapic.h>
#include <linux/mc146818rtc.h>
diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c
index d2ab52c..7066cb8 100644
--- a/arch/x86/kernel/sys_i386_32.c
+++ b/arch/x86/kernel/sys_i386_32.c
@@ -19,8 +19,8 @@
#include <linux/utsname.h>
#include <linux/ipc.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
@@ -103,7 +103,7 @@
*
* This is really horribly ugly.
*/
-asmlinkage int sys_ipc (uint call, int first, int second,
+asmlinkage int sys_ipc(uint call, int first, int second,
int third, void __user *ptr, long fifth)
{
int version, ret;
@@ -113,24 +113,24 @@
switch (call) {
case SEMOP:
- return sys_semtimedop (first, (struct sembuf __user *)ptr, second, NULL);
+ return sys_semtimedop(first, (struct sembuf __user *)ptr, second, NULL);
case SEMTIMEDOP:
return sys_semtimedop(first, (struct sembuf __user *)ptr, second,
(const struct timespec __user *)fifth);
case SEMGET:
- return sys_semget (first, second, third);
+ return sys_semget(first, second, third);
case SEMCTL: {
union semun fourth;
if (!ptr)
return -EINVAL;
if (get_user(fourth.__pad, (void __user * __user *) ptr))
return -EFAULT;
- return sys_semctl (first, second, third, fourth);
+ return sys_semctl(first, second, third, fourth);
}
case MSGSND:
- return sys_msgsnd (first, (struct msgbuf __user *) ptr,
+ return sys_msgsnd(first, (struct msgbuf __user *) ptr,
second, third);
case MSGRCV:
switch (version) {
@@ -138,45 +138,45 @@
struct ipc_kludge tmp;
if (!ptr)
return -EINVAL;
-
+
if (copy_from_user(&tmp,
- (struct ipc_kludge __user *) ptr,
- sizeof (tmp)))
+ (struct ipc_kludge __user *) ptr,
+ sizeof(tmp)))
return -EFAULT;
- return sys_msgrcv (first, tmp.msgp, second,
+ return sys_msgrcv(first, tmp.msgp, second,
tmp.msgtyp, third);
}
default:
- return sys_msgrcv (first,
+ return sys_msgrcv(first,
(struct msgbuf __user *) ptr,
second, fifth, third);
}
case MSGGET:
- return sys_msgget ((key_t) first, second);
+ return sys_msgget((key_t) first, second);
case MSGCTL:
- return sys_msgctl (first, second, (struct msqid_ds __user *) ptr);
+ return sys_msgctl(first, second, (struct msqid_ds __user *) ptr);
case SHMAT:
switch (version) {
default: {
ulong raddr;
- ret = do_shmat (first, (char __user *) ptr, second, &raddr);
+ ret = do_shmat(first, (char __user *) ptr, second, &raddr);
if (ret)
return ret;
- return put_user (raddr, (ulong __user *) third);
+ return put_user(raddr, (ulong __user *) third);
}
case 1: /* iBCS2 emulator entry point */
if (!segment_eq(get_fs(), get_ds()))
return -EINVAL;
/* The "(ulong *) third" is valid _only_ because of the kernel segment thing */
- return do_shmat (first, (char __user *) ptr, second, (ulong *) third);
+ return do_shmat(first, (char __user *) ptr, second, (ulong *) third);
}
- case SHMDT:
- return sys_shmdt ((char __user *)ptr);
+ case SHMDT:
+ return sys_shmdt((char __user *)ptr);
case SHMGET:
- return sys_shmget (first, second, third);
+ return sys_shmget(first, second, third);
case SHMCTL:
- return sys_shmctl (first, second,
+ return sys_shmctl(first, second,
(struct shmid_ds __user *) ptr);
default:
return -ENOSYS;
@@ -186,28 +186,28 @@
/*
* Old cruft
*/
-asmlinkage int sys_uname(struct old_utsname __user * name)
+asmlinkage int sys_uname(struct old_utsname __user *name)
{
int err;
if (!name)
return -EFAULT;
down_read(&uts_sem);
- err = copy_to_user(name, utsname(), sizeof (*name));
+ err = copy_to_user(name, utsname(), sizeof(*name));
up_read(&uts_sem);
- return err?-EFAULT:0;
+ return err? -EFAULT:0;
}
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+asmlinkage int sys_olduname(struct oldold_utsname __user *name)
{
int error;
if (!name)
return -EFAULT;
- if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
+ if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
return -EFAULT;
-
- down_read(&uts_sem);
-
+
+ down_read(&uts_sem);
+
error = __copy_to_user(&name->sysname, &utsname()->sysname,
__OLD_UTS_LEN);
error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
@@ -223,9 +223,9 @@
error |= __copy_to_user(&name->machine, &utsname()->machine,
__OLD_UTS_LEN);
error |= __put_user(0, name->machine + __OLD_UTS_LEN);
-
+
up_read(&uts_sem);
-
+
error = error ? -EFAULT : 0;
return error;
@@ -241,6 +241,6 @@
long __res;
asm volatile ("push %%ebx ; movl %2,%%ebx ; int $0x80 ; pop %%ebx"
: "=a" (__res)
- : "0" (__NR_execve),"ri" (filename),"c" (argv), "d" (envp) : "memory");
+ : "0" (__NR_execve), "ri" (filename), "c" (argv), "d" (envp) : "memory");
return __res;
}
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index adff76e..ec6d3b2 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -71,7 +71,6 @@
asmlinkage void page_fault(void);
asmlinkage void coprocessor_error(void);
asmlinkage void simd_coprocessor_error(void);
-asmlinkage void reserved(void);
asmlinkage void alignment_check(void);
asmlinkage void machine_check(void);
asmlinkage void spurious_interrupt_bug(void);
@@ -702,12 +701,10 @@
DO_ERROR( 4, SIGSEGV, "overflow", overflow)
DO_ERROR( 5, SIGSEGV, "bounds", bounds)
DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
-DO_ERROR( 7, SIGSEGV, "device not available", device_not_available)
DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
-DO_ERROR(18, SIGSEGV, "reserved", reserved)
/* Runs on IST stack */
asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index ba8c0b7..0c029e8 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -15,9 +15,12 @@
#include <linux/init.h>
#include <linux/pci_ids.h>
#include <linux/pci_regs.h>
+
+#include <asm/apic.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
#include <asm/paravirt.h>
+#include <asm/setup.h>
#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
/*
diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c
index 04869e6..0054835 100644
--- a/arch/x86/math-emu/reg_constant.c
+++ b/arch/x86/math-emu/reg_constant.c
@@ -16,8 +16,8 @@
#include "reg_constant.h"
#include "control_w.h"
-#define MAKE_REG(s,e,l,h) { l, h, \
- ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
+#define MAKE_REG(s, e, l, h) { l, h, \
+ ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000);
#if 0
@@ -40,7 +40,7 @@
FPU_REG const CONST_Z = MAKE_REG(POS, EXP_UNDER, 0x0, 0x0);
/* Only the sign and significand (and tag) are used in internal NaNs */
-/* The 80486 never generates one of these
+/* The 80486 never generates one of these
FPU_REG const CONST_SNAN = MAKE_REG(POS, EXP_OVER, 0x00000001, 0x80000000);
*/
/* This is the real indefinite QNaN */
@@ -49,7 +49,7 @@
/* Only the sign (and tag) is used in internal infinities */
FPU_REG const CONST_INF = MAKE_REG(POS, EXP_OVER, 0x00000000, 0x80000000);
-static void fld_const(FPU_REG const *c, int adj, u_char tag)
+static void fld_const(FPU_REG const * c, int adj, u_char tag)
{
FPU_REG *st_new_ptr;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ec30d10..4834c0f 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -571,17 +571,6 @@
#endif
bad_ppro = ppro_with_ram_bug();
-#ifdef CONFIG_HIGHMEM
- /* check that fixmap and pkmap do not overlap */
- if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) {
- printk(KERN_ERR
- "fixmap and kmap areas overlap - this will crash\n");
- printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n",
- PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE,
- FIXADDR_START);
- BUG();
- }
-#endif
/* this will put all low memory onto the freelists */
totalram_pages += free_all_bootmem();
@@ -614,7 +603,6 @@
(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
);
-#if 1 /* double-sanity-check paranoia */
printk(KERN_INFO "virtual kernel memory layout:\n"
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
#ifdef CONFIG_HIGHMEM
@@ -655,7 +643,6 @@
#endif
BUG_ON(VMALLOC_START > VMALLOC_END);
BUG_ON((unsigned long)high_memory > VMALLOC_START);
-#endif /* double-sanity-check paranoia */
if (boot_cpu_data.wp_works_ok < 0)
test_wp_bit();
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 156e6d7..46b3903 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -18,6 +18,7 @@
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 1f476e4..0ea66b5 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -22,6 +22,7 @@
#include <asm/numa.h>
#include <asm/mpspec.h>
#include <asm/apic.h>
+#include <asm/k8.h>
static __init int find_northbridge(void)
{
@@ -73,17 +74,12 @@
int __init k8_scan_nodes(unsigned long start, unsigned long end)
{
+ unsigned numnodes, cores, bits, apicid_base;
unsigned long prevbase;
struct bootnode nodes[8];
- int nodeid, i, nb;
unsigned char nodeids[8];
- int found = 0;
- u32 reg;
- unsigned numnodes;
- unsigned cores;
- unsigned bits;
- int j;
- unsigned apicid_base;
+ int i, j, nb, found = 0;
+ u32 nodeid, reg;
if (!early_pci_allowed())
return -1;
@@ -105,7 +101,6 @@
prevbase = 0;
for (i = 0; i < 8; i++) {
unsigned long base, limit;
- u32 nodeid;
base = read_pci_config(0, nb, 1, 0x40 + i*8);
limit = read_pci_config(0, nb, 1, 0x44 + i*8);
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 5015976..ee1d6d39 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -255,7 +255,7 @@
if (pte_young(*ptep))
ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
- &ptep->pte);
+ (unsigned long *) &ptep->pte);
if (ret)
pte_update(vma->vm_mm, addr, ptep);
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 99649dc..391d510 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -495,6 +495,7 @@
EXPORT_SYMBOL(__node_distance);
+#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY)
int memory_add_physaddr_to_nid(u64 start)
{
int i, ret = 0;
@@ -506,4 +507,4 @@
return ret;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-
+#endif
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index ca8df9c..f0859de 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -11,8 +11,8 @@
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
-#include <asm/io.h>
-#include <asm/smp.h>
+#include <linux/io.h>
+#include <linux/smp.h>
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
@@ -61,7 +61,7 @@
* and perform checksum verification.
*/
-static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
{
struct irq_routing_table *rt;
int i;
@@ -74,7 +74,7 @@
rt->size < sizeof(struct irq_routing_table))
return NULL;
sum = 0;
- for (i=0; i < rt->size; i++)
+ for (i = 0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
@@ -100,7 +100,7 @@
return rt;
printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
}
- for(addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
+ for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) {
rt = pirq_check_routing_table(addr);
if (rt)
return rt;
@@ -122,20 +122,20 @@
struct irq_info *e;
memset(busmap, 0, sizeof(busmap));
- for(i=0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
+ for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) {
e = &rt->slots[i];
#ifdef DEBUG
{
int j;
DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
- for(j=0; j<4; j++)
+ for (j = 0; j < 4; j++)
DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
DBG("\n");
}
#endif
busmap[e->bus] = 1;
}
- for(i = 1; i < 256; i++) {
+ for (i = 1; i < 256; i++) {
int node;
if (!busmap[i] || pci_find_bus(0, i))
continue;
@@ -285,7 +285,7 @@
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
WARN_ON_ONCE(pirq > 4);
- return read_config_nybble(router,0x43, pirqmap[pirq-1]);
+ return read_config_nybble(router, 0x43, pirqmap[pirq-1]);
}
static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
@@ -314,7 +314,7 @@
/*
* Cyrix: nibble offset 0x5C
- * 0x5C bits 7:4 is INTB bits 3:0 is INTA
+ * 0x5C bits 7:4 is INTB bits 3:0 is INTA
* 0x5D bits 7:4 is INTD bits 3:0 is INTC
*/
static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
@@ -350,7 +350,7 @@
* Apparently there are systems implementing PCI routing table using
* link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
* We try our best to handle both link mappings.
- *
+ *
* Currently (2003-05-21) it appears most SiS chipsets follow the
* definition of routing registers from the SiS-5595 southbridge.
* According to the SiS 5595 datasheets the revision id's of the
@@ -370,7 +370,7 @@
*
* 0x62: USBIRQ:
* bit 6 OHCI function disabled (0), enabled (1)
- *
+ *
* 0x6a: ACPI/SCI IRQ: bits 4-6 reserved
*
* 0x7e: Data Acq. Module IRQ - bits 4-6 reserved
@@ -487,9 +487,7 @@
u8 irq;
irq = 0;
if (pirq <= 4)
- {
irq = read_config_nybble(router, 0x56, pirq - 1);
- }
printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
return irq;
@@ -497,12 +495,10 @@
static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
- printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
+ printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
dev->vendor, dev->device, pirq, irq);
if (pirq <= 4)
- {
write_config_nybble(router, 0x56, pirq - 1, irq);
- }
return 1;
}
@@ -549,50 +545,49 @@
if (pci_dev_present(pirq_440gx))
return 0;
- switch(device)
- {
- case PCI_DEVICE_ID_INTEL_82371FB_0:
- case PCI_DEVICE_ID_INTEL_82371SB_0:
- case PCI_DEVICE_ID_INTEL_82371AB_0:
- case PCI_DEVICE_ID_INTEL_82371MX:
- case PCI_DEVICE_ID_INTEL_82443MX_0:
- case PCI_DEVICE_ID_INTEL_82801AA_0:
- case PCI_DEVICE_ID_INTEL_82801AB_0:
- case PCI_DEVICE_ID_INTEL_82801BA_0:
- case PCI_DEVICE_ID_INTEL_82801BA_10:
- case PCI_DEVICE_ID_INTEL_82801CA_0:
- case PCI_DEVICE_ID_INTEL_82801CA_12:
- case PCI_DEVICE_ID_INTEL_82801DB_0:
- case PCI_DEVICE_ID_INTEL_82801E_0:
- case PCI_DEVICE_ID_INTEL_82801EB_0:
- case PCI_DEVICE_ID_INTEL_ESB_1:
- case PCI_DEVICE_ID_INTEL_ICH6_0:
- case PCI_DEVICE_ID_INTEL_ICH6_1:
- case PCI_DEVICE_ID_INTEL_ICH7_0:
- case PCI_DEVICE_ID_INTEL_ICH7_1:
- case PCI_DEVICE_ID_INTEL_ICH7_30:
- case PCI_DEVICE_ID_INTEL_ICH7_31:
- case PCI_DEVICE_ID_INTEL_ESB2_0:
- case PCI_DEVICE_ID_INTEL_ICH8_0:
- case PCI_DEVICE_ID_INTEL_ICH8_1:
- case PCI_DEVICE_ID_INTEL_ICH8_2:
- case PCI_DEVICE_ID_INTEL_ICH8_3:
- case PCI_DEVICE_ID_INTEL_ICH8_4:
- case PCI_DEVICE_ID_INTEL_ICH9_0:
- case PCI_DEVICE_ID_INTEL_ICH9_1:
- case PCI_DEVICE_ID_INTEL_ICH9_2:
- case PCI_DEVICE_ID_INTEL_ICH9_3:
- case PCI_DEVICE_ID_INTEL_ICH9_4:
- case PCI_DEVICE_ID_INTEL_ICH9_5:
- case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
- case PCI_DEVICE_ID_INTEL_ICH10_0:
- case PCI_DEVICE_ID_INTEL_ICH10_1:
- case PCI_DEVICE_ID_INTEL_ICH10_2:
- case PCI_DEVICE_ID_INTEL_ICH10_3:
- r->name = "PIIX/ICH";
- r->get = pirq_piix_get;
- r->set = pirq_piix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_INTEL_82371FB_0:
+ case PCI_DEVICE_ID_INTEL_82371SB_0:
+ case PCI_DEVICE_ID_INTEL_82371AB_0:
+ case PCI_DEVICE_ID_INTEL_82371MX:
+ case PCI_DEVICE_ID_INTEL_82443MX_0:
+ case PCI_DEVICE_ID_INTEL_82801AA_0:
+ case PCI_DEVICE_ID_INTEL_82801AB_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_0:
+ case PCI_DEVICE_ID_INTEL_82801BA_10:
+ case PCI_DEVICE_ID_INTEL_82801CA_0:
+ case PCI_DEVICE_ID_INTEL_82801CA_12:
+ case PCI_DEVICE_ID_INTEL_82801DB_0:
+ case PCI_DEVICE_ID_INTEL_82801E_0:
+ case PCI_DEVICE_ID_INTEL_82801EB_0:
+ case PCI_DEVICE_ID_INTEL_ESB_1:
+ case PCI_DEVICE_ID_INTEL_ICH6_0:
+ case PCI_DEVICE_ID_INTEL_ICH6_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_0:
+ case PCI_DEVICE_ID_INTEL_ICH7_1:
+ case PCI_DEVICE_ID_INTEL_ICH7_30:
+ case PCI_DEVICE_ID_INTEL_ICH7_31:
+ case PCI_DEVICE_ID_INTEL_ESB2_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_0:
+ case PCI_DEVICE_ID_INTEL_ICH8_1:
+ case PCI_DEVICE_ID_INTEL_ICH8_2:
+ case PCI_DEVICE_ID_INTEL_ICH8_3:
+ case PCI_DEVICE_ID_INTEL_ICH8_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_0:
+ case PCI_DEVICE_ID_INTEL_ICH9_1:
+ case PCI_DEVICE_ID_INTEL_ICH9_2:
+ case PCI_DEVICE_ID_INTEL_ICH9_3:
+ case PCI_DEVICE_ID_INTEL_ICH9_4:
+ case PCI_DEVICE_ID_INTEL_ICH9_5:
+ case PCI_DEVICE_ID_INTEL_TOLAPAI_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_0:
+ case PCI_DEVICE_ID_INTEL_ICH10_1:
+ case PCI_DEVICE_ID_INTEL_ICH10_2:
+ case PCI_DEVICE_ID_INTEL_ICH10_3:
+ r->name = "PIIX/ICH";
+ r->get = pirq_piix_get;
+ r->set = pirq_piix_set;
+ return 1;
}
return 0;
}
@@ -606,7 +601,7 @@
* workarounds for some buggy BIOSes
*/
if (device == PCI_DEVICE_ID_VIA_82C586_0) {
- switch(router->device) {
+ switch (router->device) {
case PCI_DEVICE_ID_VIA_82C686:
/*
* Asus k7m bios wrongly reports 82C686A
@@ -631,7 +626,7 @@
}
}
- switch(device) {
+ switch (device) {
case PCI_DEVICE_ID_VIA_82C586_0:
r->name = "VIA";
r->get = pirq_via586_get;
@@ -654,13 +649,12 @@
static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_VLSI_82C534:
- r->name = "VLSI 82C534";
- r->get = pirq_vlsi_get;
- r->set = pirq_vlsi_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_VLSI_82C534:
+ r->name = "VLSI 82C534";
+ r->get = pirq_vlsi_get;
+ r->set = pirq_vlsi_set;
+ return 1;
}
return 0;
}
@@ -668,14 +662,13 @@
static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_SERVERWORKS_OSB4:
- case PCI_DEVICE_ID_SERVERWORKS_CSB5:
- r->name = "ServerWorks";
- r->get = pirq_serverworks_get;
- r->set = pirq_serverworks_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+ r->name = "ServerWorks";
+ r->get = pirq_serverworks_get;
+ r->set = pirq_serverworks_set;
+ return 1;
}
return 0;
}
@@ -684,7 +677,7 @@
{
if (device != PCI_DEVICE_ID_SI_503)
return 0;
-
+
r->name = "SIS";
r->get = pirq_sis_get;
r->set = pirq_sis_set;
@@ -693,47 +686,43 @@
static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_CYRIX_5520:
- r->name = "NatSemi";
- r->get = pirq_cyrix_get;
- r->set = pirq_cyrix_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_CYRIX_5520:
+ r->name = "NatSemi";
+ r->get = pirq_cyrix_get;
+ r->set = pirq_cyrix_set;
+ return 1;
}
return 0;
}
static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_OPTI_82C700:
- r->name = "OPTI";
- r->get = pirq_opti_get;
- r->set = pirq_opti_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_OPTI_82C700:
+ r->name = "OPTI";
+ r->get = pirq_opti_get;
+ r->set = pirq_opti_set;
+ return 1;
}
return 0;
}
static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_ITE_IT8330G_0:
- r->name = "ITE";
- r->get = pirq_ite_get;
- r->set = pirq_ite_set;
- return 1;
+ switch (device) {
+ case PCI_DEVICE_ID_ITE_IT8330G_0:
+ r->name = "ITE";
+ r->get = pirq_ite_get;
+ r->set = pirq_ite_set;
+ return 1;
}
return 0;
}
static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
+ switch (device) {
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
@@ -747,25 +736,24 @@
static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
- switch(device)
- {
- case PCI_DEVICE_ID_AMD_VIPER_740B:
- r->name = "AMD756";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7413:
- r->name = "AMD766";
- break;
- case PCI_DEVICE_ID_AMD_VIPER_7443:
- r->name = "AMD768";
- break;
- default:
- return 0;
+ switch (device) {
+ case PCI_DEVICE_ID_AMD_VIPER_740B:
+ r->name = "AMD756";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7413:
+ r->name = "AMD766";
+ break;
+ case PCI_DEVICE_ID_AMD_VIPER_7443:
+ r->name = "AMD768";
+ break;
+ default:
+ return 0;
}
r->get = pirq_amd756_get;
r->set = pirq_amd756_set;
return 1;
}
-
+
static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
{
switch (device) {
@@ -807,7 +795,7 @@
* FIXME: should we have an option to say "generic for
* chipset" ?
*/
-
+
static void __init pirq_find_router(struct irq_router *r)
{
struct irq_routing_table *rt = pirq_table;
@@ -826,7 +814,7 @@
r->name = "default";
r->get = NULL;
r->set = NULL;
-
+
DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
rt->rtr_vendor, rt->rtr_device);
@@ -837,7 +825,7 @@
return;
}
- for( h = pirq_routers; h->vendor; h++) {
+ for (h = pirq_routers; h->vendor; h++) {
/* First look for a router match */
if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
break;
@@ -889,7 +877,7 @@
if (!pirq_table)
return 0;
-
+
DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
@@ -928,8 +916,10 @@
*/
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
- if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk("\n" KERN_WARNING
+ if (pci_probe & PCI_USE_PIRQ_MASK)
+ newirq = 0;
+ else
+ printk("\n" KERN_WARNING
"PCI: IRQ %i for device %s doesn't match PIRQ mask "
"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
pci_name(dev));
@@ -949,8 +939,8 @@
irq = pirq & 0xf;
DBG(" -> hardcoded IRQ %d\n", irq);
msg = "Hardcoded";
- } else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
- ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+ } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
+ ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
DBG(" -> got IRQ %d\n", irq);
msg = "Found";
eisa_set_level_irq(irq);
@@ -985,15 +975,15 @@
continue;
if (info->irq[pin].link == pirq) {
/* We refuse to override the dev->irq information. Give a warning! */
- if ( dev2->irq && dev2->irq != irq && \
+ if (dev2->irq && dev2->irq != irq && \
(!(pci_probe & PCI_USE_PIRQ_MASK) || \
- ((1 << dev2->irq) & mask)) ) {
+ ((1 << dev2->irq) & mask))) {
#ifndef CONFIG_PCI_MSI
- printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
+ printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
pci_name(dev2), dev2->irq, irq);
#endif
- continue;
- }
+ continue;
+ }
dev2->irq = irq;
pirq_penalty[irq]++;
if (dev != dev2)
@@ -1031,8 +1021,7 @@
/*
* Recalculate IRQ numbers if we use the I/O APIC.
*/
- if (io_apic_assign_pci_irqs)
- {
+ if (io_apic_assign_pci_irqs) {
int irq;
if (pin) {
@@ -1045,10 +1034,10 @@
* busses itself so we should get into this branch reliably.
*/
if (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
@@ -1138,7 +1127,7 @@
pirq_find_router(&pirq_router);
if (pirq_table->exclusive_irqs) {
int i;
- for (i=0; i<16; i++)
+ for (i = 0; i < 16; i++)
if (!(pirq_table->exclusive_irqs & (1 << i)))
pirq_penalty[i] += 100;
}
@@ -1203,10 +1192,10 @@
*/
temp_dev = dev;
while (irq < 0 && dev->bus->parent) { /* go back to the bridge */
- struct pci_dev * bridge = dev->bus->self;
+ struct pci_dev *bridge = dev->bus->self;
pin = (pin + PCI_SLOT(dev->devfn)) % 4;
- irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
+ irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn), pin);
if (irq >= 0)
printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 0cfebec..23faaa8 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -374,7 +374,7 @@
static int __initdata known_bridge;
-void __init __pci_mmcfg_init(int early)
+static void __init __pci_mmcfg_init(int early)
{
/* MMCONFIG disabled */
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
index 90dec0c..70939820 100644
--- a/include/asm-x86/asm.h
+++ b/include/asm-x86/asm.h
@@ -1,33 +1,29 @@
#ifndef _ASM_X86_ASM_H
#define _ASM_X86_ASM_H
-#ifdef CONFIG_X86_32
-/* 32 bits */
-
-# define _ASM_PTR " .long "
-# define _ASM_ALIGN " .balign 4 "
-# define _ASM_MOV_UL " movl "
-
-# define _ASM_INC " incl "
-# define _ASM_DEC " decl "
-# define _ASM_ADD " addl "
-# define _ASM_SUB " subl "
-# define _ASM_XADD " xaddl "
-
+#ifdef __ASSEMBLY__
+# define __ASM_FORM(x) x
#else
-/* 64 bits */
+# define __ASM_FORM(x) " " #x " "
+#endif
-# define _ASM_PTR " .quad "
-# define _ASM_ALIGN " .balign 8 "
-# define _ASM_MOV_UL " movq "
+#ifdef CONFIG_X86_32
+# define __ASM_SEL(a,b) __ASM_FORM(a)
+#else
+# define __ASM_SEL(a,b) __ASM_FORM(b)
+#endif
-# define _ASM_INC " incq "
-# define _ASM_DEC " decq "
-# define _ASM_ADD " addq "
-# define _ASM_SUB " subq "
-# define _ASM_XADD " xaddq "
+#define __ASM_SIZE(inst) __ASM_SEL(inst##l, inst##q)
-#endif /* CONFIG_X86_32 */
+#define _ASM_PTR __ASM_SEL(.long, .quad)
+#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8)
+#define _ASM_MOV_UL __ASM_SIZE(mov)
+
+#define _ASM_INC __ASM_SIZE(inc)
+#define _ASM_DEC __ASM_SIZE(dec)
+#define _ASM_ADD __ASM_SIZE(add)
+#define _ASM_SUB __ASM_SIZE(sub)
+#define _ASM_XADD __ASM_SIZE(xadd)
/* Exception table entry */
# define _ASM_EXTABLE(from,to) \
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
index 3e0cd7d..fe589c1 100644
--- a/include/asm-x86/atomic_64.h
+++ b/include/asm-x86/atomic_64.h
@@ -11,12 +11,6 @@
* resource counting etc..
*/
-#ifdef CONFIG_SMP
-#define LOCK "lock ; "
-#else
-#define LOCK ""
-#endif
-
/*
* Make sure gcc doesn't try to be clever and move things around
* on us. We need to use _exactly_ the address the user gave us,
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 0d609c8..78b47e7 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -142,11 +142,11 @@
#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
#define setup_clear_cpu_cap(bit) do { \
clear_cpu_cap(&boot_cpu_data, bit); \
- set_bit(bit, cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, cleared_cpu_caps); \
+ clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h
index d2526d3..7515c19 100644
--- a/include/asm-x86/current.h
+++ b/include/asm-x86/current.h
@@ -1,5 +1,39 @@
+#ifndef _X86_CURRENT_H
+#define _X86_CURRENT_H
+
#ifdef CONFIG_X86_32
-# include "current_32.h"
-#else
-# include "current_64.h"
-#endif
+#include <linux/compiler.h>
+#include <asm/percpu.h>
+
+struct task_struct;
+
+DECLARE_PER_CPU(struct task_struct *, current_task);
+static __always_inline struct task_struct *get_current(void)
+{
+ return x86_read_percpu(current_task);
+}
+
+#else /* X86_32 */
+
+#ifndef __ASSEMBLY__
+#include <asm/pda.h>
+
+struct task_struct;
+
+static __always_inline struct task_struct *get_current(void)
+{
+ return read_pda(pcurrent);
+}
+
+#else /* __ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* X86_32 */
+
+#define current get_current()
+
+#endif /* X86_CURRENT_H */
diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h
deleted file mode 100644
index 5af9bdb..0000000
--- a/include/asm-x86/current_32.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _I386_CURRENT_H
-#define _I386_CURRENT_H
-
-#include <linux/compiler.h>
-#include <asm/percpu.h>
-
-struct task_struct;
-
-DECLARE_PER_CPU(struct task_struct *, current_task);
-static __always_inline struct task_struct *get_current(void)
-{
- return x86_read_percpu(current_task);
-}
-
-#define current get_current()
-
-#endif /* !(_I386_CURRENT_H) */
diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h
deleted file mode 100644
index 2d368ed..0000000
--- a/include/asm-x86/current_64.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _X86_64_CURRENT_H
-#define _X86_64_CURRENT_H
-
-#if !defined(__ASSEMBLY__)
-struct task_struct;
-
-#include <asm/pda.h>
-
-static inline struct task_struct *get_current(void)
-{
- struct task_struct *t = read_pda(pcurrent);
- return t;
-}
-
-#define current get_current()
-
-#else
-
-#ifndef ASM_OFFSET_H
-#include <asm/asm-offsets.h>
-#endif
-
-#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
-
-#endif
-
-#endif /* !(_X86_64_CURRENT_H) */
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
index 4b96148..f0df7ee 100644
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -79,10 +79,6 @@
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
-#ifdef CONFIG_ACPI
- FIX_ACPI_BEGIN,
- FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
#ifdef CONFIG_PCI_MMCONFIG
FIX_PCIE_MCFG,
#endif
@@ -103,6 +99,10 @@
(__end_of_permanent_fixed_addresses & 511),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
FIX_WP_TEST,
+#ifdef CONFIG_ACPI
+ FIX_ACPI_BEGIN,
+ FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
+#endif
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h
new file mode 100644
index 0000000..95beda0
--- /dev/null
+++ b/include/asm-x86/mmconfig.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_MMCONFIG_H
+#define _ASM_MMCONFIG_H
+
+#ifdef CONFIG_PCI_MMCONFIG
+extern void __cpuinit fam10h_check_enable_mmcfg(void);
+extern void __init check_enable_amd_mmconf_dmi(void);
+#else
+static inline void fam10h_check_enable_mmcfg(void) { }
+static inline void check_enable_amd_mmconf_dmi(void) { }
+#endif
+
+#endif
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 1e36302..621bd09 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -15,27 +15,6 @@
*/
int do_nmi_callback(struct pt_regs *regs, int cpu);
-#ifdef CONFIG_PM
-
-/** Replace the PM callback routine for NMI. */
-struct pm_dev *set_nmi_pm_callback(pm_callback callback);
-
-/** Unset the PM callback routine back to the default. */
-void unset_nmi_pm_callback(struct pm_dev *dev);
-
-#else
-
-static inline struct pm_dev *set_nmi_pm_callback(pm_callback callback)
-{
- return 0;
-}
-
-static inline void unset_nmi_pm_callback(struct pm_dev *dev)
-{
-}
-
-#endif /* CONFIG_PM */
-
#ifdef CONFIG_X86_64
extern void default_do_nmi(struct pt_regs *);
extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
@@ -46,7 +25,6 @@
extern int check_nmi_watchdog(void);
extern int nmi_watchdog_enabled;
-extern int unknown_nmi_panic;
extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
extern int avail_to_resrv_perfctr_nmi(unsigned int);
extern int reserve_perfctr_nmi(unsigned int);
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index dc936dd..ed16509 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -51,8 +51,15 @@
#ifndef __ASSEMBLY__
+typedef struct { pgdval_t pgd; } pgd_t;
+typedef struct { pgprotval_t pgprot; } pgprot_t;
+
extern int page_is_ram(unsigned long pagenr);
extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+ pgprot_t vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+ pgprot_t vma_prot);
extern unsigned long max_pfn_mapped;
@@ -74,9 +81,6 @@
alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
static inline pgd_t native_make_pgd(pgdval_t val)
{
return (pgd_t) { val };
diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h
index 199cab10..092b39b 100644
--- a/include/asm-x86/processor-flags.h
+++ b/include/asm-x86/processor-flags.h
@@ -88,4 +88,10 @@
#define CX86_ARR_BASE 0xc4
#define CX86_RCR_BASE 0xdc
+#ifdef CONFIG_VM86
+#define X86_VM_MASK X86_EFLAGS_VM
+#else
+#define X86_VM_MASK 0 /* No VM86 support */
+#endif
+
#endif /* __ASM_I386_PROCESSOR_FLAGS_H */
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index 9f922b0..8a71db8 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -3,7 +3,12 @@
#include <linux/compiler.h> /* For __user */
#include <asm/ptrace-abi.h>
+#include <asm/processor-flags.h>
+#ifdef __KERNEL__
+#include <asm/ds.h> /* the DS BTS struct is used for ptrace too */
+#include <asm/segment.h>
+#endif
#ifndef __ASSEMBLY__
@@ -55,9 +60,6 @@
unsigned long ss;
};
-#include <asm/vm86.h>
-#include <asm/segment.h>
-
#endif /* __KERNEL__ */
#else /* __i386__ */
diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h
index e63741f..206f355 100644
--- a/include/asm-x86/reboot.h
+++ b/include/asm-x86/reboot.h
@@ -14,8 +14,8 @@
extern struct machine_ops machine_ops;
-void machine_real_restart(unsigned char *code, int length);
void native_machine_crash_shutdown(struct pt_regs *regs);
void native_machine_shutdown(void);
+void machine_real_restart(const unsigned char *code, int length);
#endif /* _ASM_REBOOT_H */
diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h
index 18da19e..36e71c5 100644
--- a/include/asm-x86/seccomp_32.h
+++ b/include/asm-x86/seccomp_32.h
@@ -1,4 +1,5 @@
#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
#include <linux/thread_info.h>
diff --git a/include/asm-x86/seccomp_64.h b/include/asm-x86/seccomp_64.h
index 553af65..76cfe69 100644
--- a/include/asm-x86/seccomp_64.h
+++ b/include/asm-x86/seccomp_64.h
@@ -1,4 +1,5 @@
#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
#include <linux/thread_info.h>
diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h
index b49369a..193578c 100644
--- a/include/asm-x86/string_32.h
+++ b/include/asm-x86/string_32.h
@@ -29,81 +29,116 @@
#define __HAVE_ARCH_STRLEN
extern size_t strlen(const char *s);
-static __always_inline void * __memcpy(void * to, const void * from, size_t n)
+static __always_inline void *__memcpy(void *to, const void *from, size_t n)
{
-int d0, d1, d2;
-__asm__ __volatile__(
- "rep ; movsl\n\t"
- "movl %4,%%ecx\n\t"
- "andl $3,%%ecx\n\t"
- "jz 1f\n\t"
- "rep ; movsb\n\t"
- "1:"
- : "=&c" (d0), "=&D" (d1), "=&S" (d2)
- : "0" (n/4), "g" (n), "1" ((long) to), "2" ((long) from)
- : "memory");
-return (to);
+ int d0, d1, d2;
+ asm volatile("rep ; movsl\n\t"
+ "movl %4,%%ecx\n\t"
+ "andl $3,%%ecx\n\t"
+ "jz 1f\n\t"
+ "rep ; movsb\n\t"
+ "1:"
+ : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+ : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from)
+ : "memory");
+ return to;
}
/*
* This looks ugly, but the compiler can optimize it totally,
* as the count is constant.
*/
-static __always_inline void * __constant_memcpy(void * to, const void * from, size_t n)
+static __always_inline void *__constant_memcpy(void *to, const void *from,
+ size_t n)
{
long esi, edi;
- if (!n) return to;
-#if 1 /* want to do small copies with non-string ops? */
+ if (!n)
+ return to;
+
switch (n) {
- case 1: *(char*)to = *(char*)from; return to;
- case 2: *(short*)to = *(short*)from; return to;
- case 4: *(int*)to = *(int*)from; return to;
-#if 1 /* including those doable with two moves? */
- case 3: *(short*)to = *(short*)from;
- *((char*)to+2) = *((char*)from+2); return to;
- case 5: *(int*)to = *(int*)from;
- *((char*)to+4) = *((char*)from+4); return to;
- case 6: *(int*)to = *(int*)from;
- *((short*)to+2) = *((short*)from+2); return to;
- case 8: *(int*)to = *(int*)from;
- *((int*)to+1) = *((int*)from+1); return to;
-#endif
+ case 1:
+ *(char *)to = *(char *)from;
+ return to;
+ case 2:
+ *(short *)to = *(short *)from;
+ return to;
+ case 4:
+ *(int *)to = *(int *)from;
+ return to;
+
+ case 3:
+ *(short *)to = *(short *)from;
+ *((char *)to + 2) = *((char *)from + 2);
+ return to;
+ case 5:
+ *(int *)to = *(int *)from;
+ *((char *)to + 4) = *((char *)from + 4);
+ return to;
+ case 6:
+ *(int *)to = *(int *)from;
+ *((short *)to + 2) = *((short *)from + 2);
+ return to;
+ case 8:
+ *(int *)to = *(int *)from;
+ *((int *)to + 1) = *((int *)from + 1);
+ return to;
}
-#endif
- esi = (long) from;
- edi = (long) to;
- if (n >= 5*4) {
+
+ esi = (long)from;
+ edi = (long)to;
+ if (n >= 5 * 4) {
/* large block: use rep prefix */
int ecx;
- __asm__ __volatile__(
- "rep ; movsl"
- : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
- : "0" (n/4), "1" (edi),"2" (esi)
- : "memory"
+ asm volatile("rep ; movsl"
+ : "=&c" (ecx), "=&D" (edi), "=&S" (esi)
+ : "0" (n / 4), "1" (edi), "2" (esi)
+ : "memory"
);
} else {
/* small block: don't clobber ecx + smaller code */
- if (n >= 4*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 3*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 2*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- if (n >= 1*4) __asm__ __volatile__("movsl"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
+ if (n >= 4 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 3 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 2 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ if (n >= 1 * 4)
+ asm volatile("movsl"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
}
switch (n % 4) {
/* tail */
- case 0: return to;
- case 1: __asm__ __volatile__("movsb"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
- case 2: __asm__ __volatile__("movsw"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
- default: __asm__ __volatile__("movsw\n\tmovsb"
- :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory");
- return to;
+ case 0:
+ return to;
+ case 1:
+ asm volatile("movsb"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
+ case 2:
+ asm volatile("movsw"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
+ default:
+ asm volatile("movsw\n\tmovsb"
+ : "=&D"(edi), "=&S"(esi)
+ : "0"(edi), "1"(esi)
+ : "memory");
+ return to;
}
}
@@ -117,87 +152,86 @@
* This CPU favours 3DNow strongly (eg AMD Athlon)
*/
-static inline void * __constant_memcpy3d(void * to, const void * from, size_t len)
+static inline void *__constant_memcpy3d(void *to, const void *from, size_t len)
{
if (len < 512)
return __constant_memcpy(to, from, len);
return _mmx_memcpy(to, from, len);
}
-static __inline__ void *__memcpy3d(void *to, const void *from, size_t len)
+static inline void *__memcpy3d(void *to, const void *from, size_t len)
{
if (len < 512)
return __memcpy(to, from, len);
return _mmx_memcpy(to, from, len);
}
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy3d((t),(f),(n)) : \
- __memcpy3d((t),(f),(n)))
+#define memcpy(t, f, n) \
+ (__builtin_constant_p((n)) \
+ ? __constant_memcpy3d((t), (f), (n)) \
+ : __memcpy3d((t), (f), (n)))
#else
/*
* No 3D Now!
*/
-
-#define memcpy(t, f, n) \
-(__builtin_constant_p(n) ? \
- __constant_memcpy((t),(f),(n)) : \
- __memcpy((t),(f),(n)))
+
+#define memcpy(t, f, n) \
+ (__builtin_constant_p((n)) \
+ ? __constant_memcpy((t), (f), (n)) \
+ : __memcpy((t), (f), (n)))
#endif
#define __HAVE_ARCH_MEMMOVE
-void *memmove(void * dest,const void * src, size_t n);
+void *memmove(void *dest, const void *src, size_t n);
#define memcmp __builtin_memcmp
#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void * cs,int c,size_t count);
+extern void *memchr(const void *cs, int c, size_t count);
-static inline void * __memset_generic(void * s, char c,size_t count)
+static inline void *__memset_generic(void *s, char c, size_t count)
{
-int d0, d1;
-__asm__ __volatile__(
- "rep\n\t"
- "stosb"
- : "=&c" (d0), "=&D" (d1)
- :"a" (c),"1" (s),"0" (count)
- :"memory");
-return s;
+ int d0, d1;
+ asm volatile("rep\n\t"
+ "stosb"
+ : "=&c" (d0), "=&D" (d1)
+ : "a" (c), "1" (s), "0" (count)
+ : "memory");
+ return s;
}
/* we might want to write optimized versions of these later */
-#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count))
+#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count))
/*
- * memset(x,0,y) is a reasonably common thing to do, so we want to fill
+ * memset(x, 0, y) is a reasonably common thing to do, so we want to fill
* things 32 bits at a time even when we don't know the size of the
* area at compile-time..
*/
-static __always_inline void * __constant_c_memset(void * s, unsigned long c, size_t count)
+static __always_inline
+void *__constant_c_memset(void *s, unsigned long c, size_t count)
{
-int d0, d1;
-__asm__ __volatile__(
- "rep ; stosl\n\t"
- "testb $2,%b3\n\t"
- "je 1f\n\t"
- "stosw\n"
- "1:\ttestb $1,%b3\n\t"
- "je 2f\n\t"
- "stosb\n"
- "2:"
- :"=&c" (d0), "=&D" (d1)
- :"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
- :"memory");
-return (s);
+ int d0, d1;
+ asm volatile("rep ; stosl\n\t"
+ "testb $2,%b3\n\t"
+ "je 1f\n\t"
+ "stosw\n"
+ "1:\ttestb $1,%b3\n\t"
+ "je 2f\n\t"
+ "stosb\n"
+ "2:"
+ : "=&c" (d0), "=&D" (d1)
+ : "a" (c), "q" (count), "0" (count/4), "1" ((long)s)
+ : "memory");
+ return s;
}
/* Added by Gertjan van Wingerde to make minix and sysv module work */
#define __HAVE_ARCH_STRNLEN
-extern size_t strnlen(const char * s, size_t count);
+extern size_t strnlen(const char *s, size_t count);
/* end of additional stuff */
#define __HAVE_ARCH_STRSTR
@@ -207,66 +241,85 @@
* This looks horribly ugly, but the compiler can optimize it totally,
* as we by now know that both pattern and count is constant..
*/
-static __always_inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count)
+static __always_inline
+void *__constant_c_and_count_memset(void *s, unsigned long pattern,
+ size_t count)
{
switch (count) {
+ case 0:
+ return s;
+ case 1:
+ *(unsigned char *)s = pattern & 0xff;
+ return s;
+ case 2:
+ *(unsigned short *)s = pattern & 0xffff;
+ return s;
+ case 3:
+ *(unsigned short *)s = pattern & 0xffff;
+ *((unsigned char *)s + 2) = pattern & 0xff;
+ return s;
+ case 4:
+ *(unsigned long *)s = pattern;
+ return s;
+ }
+
+#define COMMON(x) \
+ asm volatile("rep ; stosl" \
+ x \
+ : "=&c" (d0), "=&D" (d1) \
+ : "a" (eax), "0" (count/4), "1" ((long)s) \
+ : "memory")
+
+ {
+ int d0, d1;
+#if __GNUC__ == 4 && __GNUC_MINOR__ == 0
+ /* Workaround for broken gcc 4.0 */
+ register unsigned long eax asm("%eax") = pattern;
+#else
+ unsigned long eax = pattern;
+#endif
+
+ switch (count % 4) {
case 0:
+ COMMON("");
return s;
case 1:
- *(unsigned char *)s = pattern & 0xff;
+ COMMON("\n\tstosb");
return s;
case 2:
- *(unsigned short *)s = pattern & 0xffff;
+ COMMON("\n\tstosw");
return s;
- case 3:
- *(unsigned short *)s = pattern & 0xffff;
- *(2+(unsigned char *)s) = pattern & 0xff;
+ default:
+ COMMON("\n\tstosw\n\tstosb");
return s;
- case 4:
- *(unsigned long *)s = pattern;
- return s;
+ }
}
-#define COMMON(x) \
-__asm__ __volatile__( \
- "rep ; stosl" \
- x \
- : "=&c" (d0), "=&D" (d1) \
- : "a" (pattern),"0" (count/4),"1" ((long) s) \
- : "memory")
-{
- int d0, d1;
- switch (count % 4) {
- case 0: COMMON(""); return s;
- case 1: COMMON("\n\tstosb"); return s;
- case 2: COMMON("\n\tstosw"); return s;
- default: COMMON("\n\tstosw\n\tstosb"); return s;
- }
-}
-
+
#undef COMMON
}
-#define __constant_c_x_memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_c_and_count_memset((s),(c),(count)) : \
- __constant_c_memset((s),(c),(count)))
+#define __constant_c_x_memset(s, c, count) \
+ (__builtin_constant_p(count) \
+ ? __constant_c_and_count_memset((s), (c), (count)) \
+ : __constant_c_memset((s), (c), (count)))
-#define __memset(s, c, count) \
-(__builtin_constant_p(count) ? \
- __constant_count_memset((s),(c),(count)) : \
- __memset_generic((s),(c),(count)))
+#define __memset(s, c, count) \
+ (__builtin_constant_p(count) \
+ ? __constant_count_memset((s), (c), (count)) \
+ : __memset_generic((s), (c), (count)))
#define __HAVE_ARCH_MEMSET
-#define memset(s, c, count) \
-(__builtin_constant_p(c) ? \
- __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \
- __memset((s),(c),(count)))
+#define memset(s, c, count) \
+ (__builtin_constant_p(c) \
+ ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
+ (count)) \
+ : __memset((s), (c), (count)))
/*
* find the first occurrence of byte 'c', or 1 past the area if none
*/
#define __HAVE_ARCH_MEMSCAN
-extern void *memscan(void * addr, int c, size_t size);
+extern void *memscan(void *addr, int c, size_t size);
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h
index 24e1c08..8675c67 100644
--- a/include/asm-x86/suspend_32.h
+++ b/include/asm-x86/suspend_32.h
@@ -3,6 +3,9 @@
* Based on code
* Copyright 2001 Patrick Mochel <mochel@osdl.org>
*/
+#ifndef __ASM_X86_32_SUSPEND_H
+#define __ASM_X86_32_SUSPEND_H
+
#include <asm/desc.h>
#include <asm/i387.h>
@@ -44,3 +47,5 @@
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
#endif
+
+#endif /* __ASM_X86_32_SUSPEND_H */
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index a2f04cd..7e4c1337 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -289,7 +289,7 @@
#endif/* CONFIG_PARAVIRT */
-#define stts() write_cr0(8 | read_cr0())
+#define stts() write_cr0(read_cr0() | X86_CR0_TS)
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index fe26e36..9c1a4a3 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -290,7 +290,7 @@
#define __NR_rt_sigqueueinfo 129
__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
#define __NR_rt_sigsuspend 130
-__SYSCALL(__NR_rt_sigsuspend, stub_rt_sigsuspend)
+__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
#define __NR_sigaltstack 131
__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
#define __NR_utime 132
diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h
index 074b357..5ce3513 100644
--- a/include/asm-x86/vm86.h
+++ b/include/asm-x86/vm86.h
@@ -14,12 +14,6 @@
#include <asm/processor-flags.h>
-#ifdef CONFIG_VM86
-#define X86_VM_MASK X86_EFLAGS_VM
-#else
-#define X86_VM_MASK 0 /* No VM86 support */
-#endif
-
#define BIOSSEG 0x0f000
#define CPU_086 0
@@ -121,7 +115,6 @@
unsigned long is_vm86pus:1; /* for vm86 internal use */
unsigned char vm86dbg_intxxtab[32]; /* for debugger */
};
-
struct vm86plus_struct {
struct vm86_regs regs;
unsigned long flags;
@@ -133,6 +126,9 @@
};
#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
/*
* This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86
* mode - the main change is that the old segment descriptors aren't
@@ -141,7 +137,6 @@
* at the end of the structure. Look at ptrace.h to see the "normal"
* setup. For user space layout see 'struct vm86_regs' above.
*/
-#include <asm/ptrace.h>
struct kernel_vm86_regs {
/*
diff --git a/include/asm-x86/xor_32.h b/include/asm-x86/xor_32.h
index 067b5c1..921b458 100644
--- a/include/asm-x86/xor_32.h
+++ b/include/asm-x86/xor_32.h
@@ -1,3 +1,6 @@
+#ifndef ASM_X86__XOR_32_H
+#define ASM_X86__XOR_32_H
+
/*
* Optimized RAID-5 checksumming functions for MMX and SSE.
*
@@ -881,3 +884,5 @@
deals with a load to a line that is being prefetched. */
#define XOR_SELECT_TEMPLATE(FASTEST) \
(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
+
+#endif /* ASM_X86__XOR_32_H */
diff --git a/include/asm-x86/xor_64.h b/include/asm-x86/xor_64.h
index 24957e3..2d3a18d 100644
--- a/include/asm-x86/xor_64.h
+++ b/include/asm-x86/xor_64.h
@@ -1,3 +1,6 @@
+#ifndef ASM_X86__XOR_64_H
+#define ASM_X86__XOR_64_H
+
/*
* Optimized RAID-5 checksumming functions for MMX and SSE.
*
@@ -354,3 +357,5 @@
We may also be able to load into the L1 only depending on how the cpu
deals with a load to a line that is being prefetched. */
#define XOR_SELECT_TEMPLATE(FASTEST) (&xor_block_sse)
+
+#endif /* ASM_X86__XOR_64_H */
