| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Copyright (C) 2017 IBM Corp. | 
 |  * | 
 |  * Driver for the Nuvoton W83773G SMBus temperature sensor IC. | 
 |  * Supported models: W83773G | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/of.h> | 
 | #include <linux/regmap.h> | 
 |  | 
 | /* W83773 has 3 channels */ | 
 | #define W83773_CHANNELS				3 | 
 |  | 
 | /* The W83773 registers */ | 
 | #define W83773_CONVERSION_RATE_REG_READ		0x04 | 
 | #define W83773_CONVERSION_RATE_REG_WRITE	0x0A | 
 | #define W83773_MANUFACTURER_ID_REG		0xFE | 
 | #define W83773_LOCAL_TEMP			0x00 | 
 |  | 
 | static const u8 W83773_STATUS[2] = { 0x02, 0x17 }; | 
 |  | 
 | static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 }; | 
 | static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 }; | 
 |  | 
 | static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 }; | 
 | static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 }; | 
 |  | 
 | /* this is the number of sensors in the device */ | 
 | static const struct i2c_device_id w83773_id[] = { | 
 | 	{ "w83773g" }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(i2c, w83773_id); | 
 |  | 
 | static const struct of_device_id __maybe_unused w83773_of_match[] = { | 
 | 	{ | 
 | 		.compatible = "nuvoton,w83773g" | 
 | 	}, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, w83773_of_match); | 
 |  | 
 | static inline long temp_of_local(s8 reg) | 
 | { | 
 | 	return reg * 1000; | 
 | } | 
 |  | 
 | static inline long temp_of_remote(s8 hb, u8 lb) | 
 | { | 
 | 	return (hb << 3 | lb >> 5) * 125; | 
 | } | 
 |  | 
 | static int get_local_temp(struct regmap *regmap, long *val) | 
 | { | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_LOCAL_TEMP, ®val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = temp_of_local(regval); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_remote_temp(struct regmap *regmap, int index, long *val) | 
 | { | 
 | 	unsigned int regval_high; | 
 | 	unsigned int regval_low; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_TEMP_MSB[index], ®val_high); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_TEMP_LSB[index], ®val_low); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = temp_of_remote(regval_high, regval_low); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_fault(struct regmap *regmap, int index, long *val) | 
 | { | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_STATUS[index], ®val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = (regval & 0x04) >> 2; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_offset(struct regmap *regmap, int index, long *val) | 
 | { | 
 | 	unsigned int regval_high; | 
 | 	unsigned int regval_low; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_OFFSET_MSB[index], ®val_high); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_OFFSET_LSB[index], ®val_low); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = temp_of_remote(regval_high, regval_low); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int set_offset(struct regmap *regmap, int index, long val) | 
 | { | 
 | 	int ret; | 
 | 	u8 high_byte; | 
 | 	u8 low_byte; | 
 |  | 
 | 	val = clamp_val(val, -127825, 127825); | 
 | 	/* offset value equals to (high_byte << 3 | low_byte >> 5) * 125 */ | 
 | 	val /= 125; | 
 | 	high_byte = val >> 3; | 
 | 	low_byte = (val & 0x07) << 5; | 
 |  | 
 | 	ret = regmap_write(regmap, W83773_OFFSET_MSB[index], high_byte); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return regmap_write(regmap, W83773_OFFSET_LSB[index], low_byte); | 
 | } | 
 |  | 
 | static int get_update_interval(struct regmap *regmap, long *val) | 
 | { | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(regmap, W83773_CONVERSION_RATE_REG_READ, ®val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	*val = 16000 >> regval; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int set_update_interval(struct regmap *regmap, long val) | 
 | { | 
 | 	int rate; | 
 |  | 
 | 	/* | 
 | 	 * For valid rates, interval can be calculated as | 
 | 	 *	interval = (1 << (8 - rate)) * 62.5; | 
 | 	 * Rounded rate is therefore | 
 | 	 *	rate = 8 - __fls(interval * 8 / (62.5 * 7)); | 
 | 	 * Use clamp_val() to avoid overflows, and to ensure valid input | 
 | 	 * for __fls. | 
 | 	 */ | 
 | 	val = clamp_val(val, 62, 16000) * 10; | 
 | 	rate = 8 - __fls((val * 8 / (625 * 7))); | 
 | 	return regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, rate); | 
 | } | 
 |  | 
 | static int w83773_read(struct device *dev, enum hwmon_sensor_types type, | 
 | 		       u32 attr, int channel, long *val) | 
 | { | 
 | 	struct regmap *regmap = dev_get_drvdata(dev); | 
 |  | 
 | 	if (type == hwmon_chip) { | 
 | 		if (attr == hwmon_chip_update_interval) | 
 | 			return get_update_interval(regmap, val); | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	switch (attr) { | 
 | 	case hwmon_temp_input: | 
 | 		if (channel == 0) | 
 | 			return get_local_temp(regmap, val); | 
 | 		return get_remote_temp(regmap, channel - 1, val); | 
 | 	case hwmon_temp_fault: | 
 | 		return get_fault(regmap, channel - 1, val); | 
 | 	case hwmon_temp_offset: | 
 | 		return get_offset(regmap, channel - 1, val); | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static int w83773_write(struct device *dev, enum hwmon_sensor_types type, | 
 | 			u32 attr, int channel, long val) | 
 | { | 
 | 	struct regmap *regmap = dev_get_drvdata(dev); | 
 |  | 
 | 	if (type == hwmon_chip && attr == hwmon_chip_update_interval) | 
 | 		return set_update_interval(regmap, val); | 
 |  | 
 | 	if (type == hwmon_temp && attr == hwmon_temp_offset) | 
 | 		return set_offset(regmap, channel - 1, val); | 
 |  | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type, | 
 | 				 u32 attr, int channel) | 
 | { | 
 | 	switch (type) { | 
 | 	case hwmon_chip: | 
 | 		switch (attr) { | 
 | 		case hwmon_chip_update_interval: | 
 | 			return 0644; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_temp: | 
 | 		switch (attr) { | 
 | 		case hwmon_temp_input: | 
 | 		case hwmon_temp_fault: | 
 | 			return 0444; | 
 | 		case hwmon_temp_offset: | 
 | 			return 0644; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct hwmon_channel_info * const w83773_info[] = { | 
 | 	HWMON_CHANNEL_INFO(chip, | 
 | 			   HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), | 
 | 	HWMON_CHANNEL_INFO(temp, | 
 | 			   HWMON_T_INPUT, | 
 | 			   HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET, | 
 | 			   HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET), | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct hwmon_ops w83773_ops = { | 
 | 	.is_visible = w83773_is_visible, | 
 | 	.read = w83773_read, | 
 | 	.write = w83773_write, | 
 | }; | 
 |  | 
 | static const struct hwmon_chip_info w83773_chip_info = { | 
 | 	.ops = &w83773_ops, | 
 | 	.info = w83773_info, | 
 | }; | 
 |  | 
 | static const struct regmap_config w83773_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | }; | 
 |  | 
 | static int w83773_probe(struct i2c_client *client) | 
 | { | 
 | 	struct device *dev = &client->dev; | 
 | 	struct device *hwmon_dev; | 
 | 	struct regmap *regmap; | 
 | 	int ret; | 
 |  | 
 | 	regmap = devm_regmap_init_i2c(client, &w83773_regmap_config); | 
 | 	if (IS_ERR(regmap)) { | 
 | 		dev_err(dev, "failed to allocate register map\n"); | 
 | 		return PTR_ERR(regmap); | 
 | 	} | 
 |  | 
 | 	/* Set the conversion rate to 2 Hz */ | 
 | 	ret = regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, 0x05); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&client->dev, "error writing config rate register\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, regmap); | 
 |  | 
 | 	hwmon_dev = devm_hwmon_device_register_with_info(dev, | 
 | 							 client->name, | 
 | 							 regmap, | 
 | 							 &w83773_chip_info, | 
 | 							 NULL); | 
 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | } | 
 |  | 
 | static struct i2c_driver w83773_driver = { | 
 | 	.class = I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= "w83773g", | 
 | 		.of_match_table = of_match_ptr(w83773_of_match), | 
 | 	}, | 
 | 	.probe = w83773_probe, | 
 | 	.id_table = w83773_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(w83773_driver); | 
 |  | 
 | MODULE_AUTHOR("Lei YU <mine260309@gmail.com>"); | 
 | MODULE_DESCRIPTION("W83773G temperature sensor driver"); | 
 | MODULE_LICENSE("GPL"); |