| /* | 
 |  * Block driver for media (i.e., flash cards) | 
 |  * | 
 |  * Copyright 2002 Hewlett-Packard Company | 
 |  * Copyright 2005-2008 Pierre Ossman | 
 |  * | 
 |  * Use consistent with the GNU GPL is permitted, | 
 |  * provided that this copyright notice is | 
 |  * preserved in its entirety in all copies and derived works. | 
 |  * | 
 |  * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, | 
 |  * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS | 
 |  * FITNESS FOR ANY PARTICULAR PURPOSE. | 
 |  * | 
 |  * Many thanks to Alessandro Rubini and Jonathan Corbet! | 
 |  * | 
 |  * Author:  Andrew Christian | 
 |  *          28 May 2002 | 
 |  */ | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/hdreg.h> | 
 | #include <linux/kdev_t.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/scatterlist.h> | 
 | #include <linux/string_helpers.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/capability.h> | 
 | #include <linux/compat.h> | 
 | #include <linux/pm_runtime.h> | 
 | #include <linux/idr.h> | 
 |  | 
 | #include <linux/mmc/ioctl.h> | 
 | #include <linux/mmc/card.h> | 
 | #include <linux/mmc/host.h> | 
 | #include <linux/mmc/mmc.h> | 
 | #include <linux/mmc/sd.h> | 
 |  | 
 | #include <asm/uaccess.h> | 
 |  | 
 | #include "queue.h" | 
 | #include "block.h" | 
 |  | 
 | MODULE_ALIAS("mmc:block"); | 
 | #ifdef MODULE_PARAM_PREFIX | 
 | #undef MODULE_PARAM_PREFIX | 
 | #endif | 
 | #define MODULE_PARAM_PREFIX "mmcblk." | 
 |  | 
 | #define INAND_CMD38_ARG_EXT_CSD  113 | 
 | #define INAND_CMD38_ARG_ERASE    0x00 | 
 | #define INAND_CMD38_ARG_TRIM     0x01 | 
 | #define INAND_CMD38_ARG_SECERASE 0x80 | 
 | #define INAND_CMD38_ARG_SECTRIM1 0x81 | 
 | #define INAND_CMD38_ARG_SECTRIM2 0x88 | 
 | #define MMC_BLK_TIMEOUT_MS  (10 * 60 * 1000)        /* 10 minute timeout */ | 
 | #define MMC_SANITIZE_REQ_TIMEOUT 240000 | 
 | #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) | 
 |  | 
 | #define mmc_req_rel_wr(req)	((req->cmd_flags & REQ_FUA) && \ | 
 | 				  (rq_data_dir(req) == WRITE)) | 
 | #define PACKED_CMD_VER	0x01 | 
 | #define PACKED_CMD_WR	0x02 | 
 |  | 
 | static DEFINE_MUTEX(block_mutex); | 
 |  | 
 | /* | 
 |  * The defaults come from config options but can be overriden by module | 
 |  * or bootarg options. | 
 |  */ | 
 | static int perdev_minors = CONFIG_MMC_BLOCK_MINORS; | 
 |  | 
 | /* | 
 |  * We've only got one major, so number of mmcblk devices is | 
 |  * limited to (1 << 20) / number of minors per device.  It is also | 
 |  * limited by the MAX_DEVICES below. | 
 |  */ | 
 | static int max_devices; | 
 |  | 
 | #define MAX_DEVICES 256 | 
 |  | 
 | static DEFINE_IDA(mmc_blk_ida); | 
 | static DEFINE_SPINLOCK(mmc_blk_lock); | 
 |  | 
 | /* | 
 |  * There is one mmc_blk_data per slot. | 
 |  */ | 
 | struct mmc_blk_data { | 
 | 	spinlock_t	lock; | 
 | 	struct device	*parent; | 
 | 	struct gendisk	*disk; | 
 | 	struct mmc_queue queue; | 
 | 	struct list_head part; | 
 |  | 
 | 	unsigned int	flags; | 
 | #define MMC_BLK_CMD23	(1 << 0)	/* Can do SET_BLOCK_COUNT for multiblock */ | 
 | #define MMC_BLK_REL_WR	(1 << 1)	/* MMC Reliable write support */ | 
 | #define MMC_BLK_PACKED_CMD	(1 << 2)	/* MMC packed command support */ | 
 |  | 
 | 	unsigned int	usage; | 
 | 	unsigned int	read_only; | 
 | 	unsigned int	part_type; | 
 | 	unsigned int	reset_done; | 
 | #define MMC_BLK_READ		BIT(0) | 
 | #define MMC_BLK_WRITE		BIT(1) | 
 | #define MMC_BLK_DISCARD		BIT(2) | 
 | #define MMC_BLK_SECDISCARD	BIT(3) | 
 |  | 
 | 	/* | 
 | 	 * Only set in main mmc_blk_data associated | 
 | 	 * with mmc_card with dev_set_drvdata, and keeps | 
 | 	 * track of the current selected device partition. | 
 | 	 */ | 
 | 	unsigned int	part_curr; | 
 | 	struct device_attribute force_ro; | 
 | 	struct device_attribute power_ro_lock; | 
 | 	int	area_type; | 
 | }; | 
 |  | 
 | static DEFINE_MUTEX(open_lock); | 
 |  | 
 | enum { | 
 | 	MMC_PACKED_NR_IDX = -1, | 
 | 	MMC_PACKED_NR_ZERO, | 
 | 	MMC_PACKED_NR_SINGLE, | 
 | }; | 
 |  | 
 | module_param(perdev_minors, int, 0444); | 
 | MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); | 
 |  | 
 | static inline int mmc_blk_part_switch(struct mmc_card *card, | 
 | 				      struct mmc_blk_data *md); | 
 | static int get_card_status(struct mmc_card *card, u32 *status, int retries); | 
 |  | 
 | static inline void mmc_blk_clear_packed(struct mmc_queue_req *mqrq) | 
 | { | 
 | 	struct mmc_packed *packed = mqrq->packed; | 
 |  | 
 | 	mqrq->cmd_type = MMC_PACKED_NONE; | 
 | 	packed->nr_entries = MMC_PACKED_NR_ZERO; | 
 | 	packed->idx_failure = MMC_PACKED_NR_IDX; | 
 | 	packed->retries = 0; | 
 | 	packed->blocks = 0; | 
 | } | 
 |  | 
 | static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) | 
 | { | 
 | 	struct mmc_blk_data *md; | 
 |  | 
 | 	mutex_lock(&open_lock); | 
 | 	md = disk->private_data; | 
 | 	if (md && md->usage == 0) | 
 | 		md = NULL; | 
 | 	if (md) | 
 | 		md->usage++; | 
 | 	mutex_unlock(&open_lock); | 
 |  | 
 | 	return md; | 
 | } | 
 |  | 
 | static inline int mmc_get_devidx(struct gendisk *disk) | 
 | { | 
 | 	int devidx = disk->first_minor / perdev_minors; | 
 | 	return devidx; | 
 | } | 
 |  | 
 | static void mmc_blk_put(struct mmc_blk_data *md) | 
 | { | 
 | 	mutex_lock(&open_lock); | 
 | 	md->usage--; | 
 | 	if (md->usage == 0) { | 
 | 		int devidx = mmc_get_devidx(md->disk); | 
 | 		blk_cleanup_queue(md->queue.queue); | 
 |  | 
 | 		spin_lock(&mmc_blk_lock); | 
 | 		ida_remove(&mmc_blk_ida, devidx); | 
 | 		spin_unlock(&mmc_blk_lock); | 
 |  | 
 | 		put_disk(md->disk); | 
 | 		kfree(md); | 
 | 	} | 
 | 	mutex_unlock(&open_lock); | 
 | } | 
 |  | 
 | static ssize_t power_ro_lock_show(struct device *dev, | 
 | 		struct device_attribute *attr, char *buf) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	int locked = 0; | 
 |  | 
 | 	if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN) | 
 | 		locked = 2; | 
 | 	else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN) | 
 | 		locked = 1; | 
 |  | 
 | 	ret = snprintf(buf, PAGE_SIZE, "%d\n", locked); | 
 |  | 
 | 	mmc_blk_put(md); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t power_ro_lock_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_blk_data *md, *part_md; | 
 | 	struct mmc_card *card; | 
 | 	unsigned long set; | 
 |  | 
 | 	if (kstrtoul(buf, 0, &set)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (set != 1) | 
 | 		return count; | 
 |  | 
 | 	md = mmc_blk_get(dev_to_disk(dev)); | 
 | 	card = md->queue.card; | 
 |  | 
 | 	mmc_get_card(card); | 
 |  | 
 | 	ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, | 
 | 				card->ext_csd.boot_ro_lock | | 
 | 				EXT_CSD_BOOT_WP_B_PWR_WP_EN, | 
 | 				card->ext_csd.part_time); | 
 | 	if (ret) | 
 | 		pr_err("%s: Locking boot partition ro until next power on failed: %d\n", md->disk->disk_name, ret); | 
 | 	else | 
 | 		card->ext_csd.boot_ro_lock |= EXT_CSD_BOOT_WP_B_PWR_WP_EN; | 
 |  | 
 | 	mmc_put_card(card); | 
 |  | 
 | 	if (!ret) { | 
 | 		pr_info("%s: Locking boot partition ro until next power on\n", | 
 | 			md->disk->disk_name); | 
 | 		set_disk_ro(md->disk, 1); | 
 |  | 
 | 		list_for_each_entry(part_md, &md->part, part) | 
 | 			if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) { | 
 | 				pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name); | 
 | 				set_disk_ro(part_md->disk, 1); | 
 | 			} | 
 | 	} | 
 |  | 
 | 	mmc_blk_put(md); | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr, | 
 | 			     char *buf) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
 |  | 
 | 	ret = snprintf(buf, PAGE_SIZE, "%d\n", | 
 | 		       get_disk_ro(dev_to_disk(dev)) ^ | 
 | 		       md->read_only); | 
 | 	mmc_blk_put(md); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr, | 
 | 			      const char *buf, size_t count) | 
 | { | 
 | 	int ret; | 
 | 	char *end; | 
 | 	struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); | 
 | 	unsigned long set = simple_strtoul(buf, &end, 0); | 
 | 	if (end == buf) { | 
 | 		ret = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	set_disk_ro(dev_to_disk(dev), set || md->read_only); | 
 | 	ret = count; | 
 | out: | 
 | 	mmc_blk_put(md); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mmc_blk_open(struct block_device *bdev, fmode_t mode) | 
 | { | 
 | 	struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); | 
 | 	int ret = -ENXIO; | 
 |  | 
 | 	mutex_lock(&block_mutex); | 
 | 	if (md) { | 
 | 		if (md->usage == 2) | 
 | 			check_disk_change(bdev); | 
 | 		ret = 0; | 
 |  | 
 | 		if ((mode & FMODE_WRITE) && md->read_only) { | 
 | 			mmc_blk_put(md); | 
 | 			ret = -EROFS; | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&block_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void mmc_blk_release(struct gendisk *disk, fmode_t mode) | 
 | { | 
 | 	struct mmc_blk_data *md = disk->private_data; | 
 |  | 
 | 	mutex_lock(&block_mutex); | 
 | 	mmc_blk_put(md); | 
 | 	mutex_unlock(&block_mutex); | 
 | } | 
 |  | 
 | static int | 
 | mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) | 
 | { | 
 | 	geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); | 
 | 	geo->heads = 4; | 
 | 	geo->sectors = 16; | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct mmc_blk_ioc_data { | 
 | 	struct mmc_ioc_cmd ic; | 
 | 	unsigned char *buf; | 
 | 	u64 buf_bytes; | 
 | }; | 
 |  | 
 | static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( | 
 | 	struct mmc_ioc_cmd __user *user) | 
 | { | 
 | 	struct mmc_blk_ioc_data *idata; | 
 | 	int err; | 
 |  | 
 | 	idata = kmalloc(sizeof(*idata), GFP_KERNEL); | 
 | 	if (!idata) { | 
 | 		err = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) { | 
 | 		err = -EFAULT; | 
 | 		goto idata_err; | 
 | 	} | 
 |  | 
 | 	idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks; | 
 | 	if (idata->buf_bytes > MMC_IOC_MAX_BYTES) { | 
 | 		err = -EOVERFLOW; | 
 | 		goto idata_err; | 
 | 	} | 
 |  | 
 | 	if (!idata->buf_bytes) { | 
 | 		idata->buf = NULL; | 
 | 		return idata; | 
 | 	} | 
 |  | 
 | 	idata->buf = kmalloc(idata->buf_bytes, GFP_KERNEL); | 
 | 	if (!idata->buf) { | 
 | 		err = -ENOMEM; | 
 | 		goto idata_err; | 
 | 	} | 
 |  | 
 | 	if (copy_from_user(idata->buf, (void __user *)(unsigned long) | 
 | 					idata->ic.data_ptr, idata->buf_bytes)) { | 
 | 		err = -EFAULT; | 
 | 		goto copy_err; | 
 | 	} | 
 |  | 
 | 	return idata; | 
 |  | 
 | copy_err: | 
 | 	kfree(idata->buf); | 
 | idata_err: | 
 | 	kfree(idata); | 
 | out: | 
 | 	return ERR_PTR(err); | 
 | } | 
 |  | 
 | static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr, | 
 | 				      struct mmc_blk_ioc_data *idata) | 
 | { | 
 | 	struct mmc_ioc_cmd *ic = &idata->ic; | 
 |  | 
 | 	if (copy_to_user(&(ic_ptr->response), ic->response, | 
 | 			 sizeof(ic->response))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (!idata->ic.write_flag) { | 
 | 		if (copy_to_user((void __user *)(unsigned long)ic->data_ptr, | 
 | 				 idata->buf, idata->buf_bytes)) | 
 | 			return -EFAULT; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status, | 
 | 				       u32 retries_max) | 
 | { | 
 | 	int err; | 
 | 	u32 retry_count = 0; | 
 |  | 
 | 	if (!status || !retries_max) | 
 | 		return -EINVAL; | 
 |  | 
 | 	do { | 
 | 		err = get_card_status(card, status, 5); | 
 | 		if (err) | 
 | 			break; | 
 |  | 
 | 		if (!R1_STATUS(*status) && | 
 | 				(R1_CURRENT_STATE(*status) != R1_STATE_PRG)) | 
 | 			break; /* RPMB programming operation complete */ | 
 |  | 
 | 		/* | 
 | 		 * Rechedule to give the MMC device a chance to continue | 
 | 		 * processing the previous command without being polled too | 
 | 		 * frequently. | 
 | 		 */ | 
 | 		usleep_range(1000, 5000); | 
 | 	} while (++retry_count < retries_max); | 
 |  | 
 | 	if (retry_count == retries_max) | 
 | 		err = -EPERM; | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ioctl_do_sanitize(struct mmc_card *card) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (!mmc_can_sanitize(card)) { | 
 | 			pr_warn("%s: %s - SANITIZE is not supported\n", | 
 | 				mmc_hostname(card->host), __func__); | 
 | 			err = -EOPNOTSUPP; | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	pr_debug("%s: %s - SANITIZE IN PROGRESS...\n", | 
 | 		mmc_hostname(card->host), __func__); | 
 |  | 
 | 	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
 | 					EXT_CSD_SANITIZE_START, 1, | 
 | 					MMC_SANITIZE_REQ_TIMEOUT); | 
 |  | 
 | 	if (err) | 
 | 		pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n", | 
 | 		       mmc_hostname(card->host), __func__, err); | 
 |  | 
 | 	pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host), | 
 | 					     __func__); | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, | 
 | 			       struct mmc_blk_ioc_data *idata) | 
 | { | 
 | 	struct mmc_command cmd = {0}; | 
 | 	struct mmc_data data = {0}; | 
 | 	struct mmc_request mrq = {NULL}; | 
 | 	struct scatterlist sg; | 
 | 	int err; | 
 | 	int is_rpmb = false; | 
 | 	u32 status = 0; | 
 |  | 
 | 	if (!card || !md || !idata) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (md->area_type & MMC_BLK_DATA_AREA_RPMB) | 
 | 		is_rpmb = true; | 
 |  | 
 | 	cmd.opcode = idata->ic.opcode; | 
 | 	cmd.arg = idata->ic.arg; | 
 | 	cmd.flags = idata->ic.flags; | 
 |  | 
 | 	if (idata->buf_bytes) { | 
 | 		data.sg = &sg; | 
 | 		data.sg_len = 1; | 
 | 		data.blksz = idata->ic.blksz; | 
 | 		data.blocks = idata->ic.blocks; | 
 |  | 
 | 		sg_init_one(data.sg, idata->buf, idata->buf_bytes); | 
 |  | 
 | 		if (idata->ic.write_flag) | 
 | 			data.flags = MMC_DATA_WRITE; | 
 | 		else | 
 | 			data.flags = MMC_DATA_READ; | 
 |  | 
 | 		/* data.flags must already be set before doing this. */ | 
 | 		mmc_set_data_timeout(&data, card); | 
 |  | 
 | 		/* Allow overriding the timeout_ns for empirical tuning. */ | 
 | 		if (idata->ic.data_timeout_ns) | 
 | 			data.timeout_ns = idata->ic.data_timeout_ns; | 
 |  | 
 | 		if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { | 
 | 			/* | 
 | 			 * Pretend this is a data transfer and rely on the | 
 | 			 * host driver to compute timeout.  When all host | 
 | 			 * drivers support cmd.cmd_timeout for R1B, this | 
 | 			 * can be changed to: | 
 | 			 * | 
 | 			 *     mrq.data = NULL; | 
 | 			 *     cmd.cmd_timeout = idata->ic.cmd_timeout_ms; | 
 | 			 */ | 
 | 			data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000; | 
 | 		} | 
 |  | 
 | 		mrq.data = &data; | 
 | 	} | 
 |  | 
 | 	mrq.cmd = &cmd; | 
 |  | 
 | 	err = mmc_blk_part_switch(card, md); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if (idata->ic.is_acmd) { | 
 | 		err = mmc_app_cmd(card->host, card); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (is_rpmb) { | 
 | 		err = mmc_set_blockcount(card, data.blocks, | 
 | 			idata->ic.write_flag & (1 << 31)); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) && | 
 | 	    (cmd.opcode == MMC_SWITCH)) { | 
 | 		err = ioctl_do_sanitize(card); | 
 |  | 
 | 		if (err) | 
 | 			pr_err("%s: ioctl_do_sanitize() failed. err = %d", | 
 | 			       __func__, err); | 
 |  | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	mmc_wait_for_req(card->host, &mrq); | 
 |  | 
 | 	if (cmd.error) { | 
 | 		dev_err(mmc_dev(card->host), "%s: cmd error %d\n", | 
 | 						__func__, cmd.error); | 
 | 		return cmd.error; | 
 | 	} | 
 | 	if (data.error) { | 
 | 		dev_err(mmc_dev(card->host), "%s: data error %d\n", | 
 | 						__func__, data.error); | 
 | 		return data.error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * According to the SD specs, some commands require a delay after | 
 | 	 * issuing the command. | 
 | 	 */ | 
 | 	if (idata->ic.postsleep_min_us) | 
 | 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); | 
 |  | 
 | 	memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp)); | 
 |  | 
 | 	if (is_rpmb) { | 
 | 		/* | 
 | 		 * Ensure RPMB command has completed by polling CMD13 | 
 | 		 * "Send Status". | 
 | 		 */ | 
 | 		err = ioctl_rpmb_card_status_poll(card, &status, 5); | 
 | 		if (err) | 
 | 			dev_err(mmc_dev(card->host), | 
 | 					"%s: Card Status=0x%08X, error %d\n", | 
 | 					__func__, status, err); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int mmc_blk_ioctl_cmd(struct block_device *bdev, | 
 | 			     struct mmc_ioc_cmd __user *ic_ptr) | 
 | { | 
 | 	struct mmc_blk_ioc_data *idata; | 
 | 	struct mmc_blk_data *md; | 
 | 	struct mmc_card *card; | 
 | 	int err = 0, ioc_err = 0; | 
 |  | 
 | 	/* | 
 | 	 * The caller must have CAP_SYS_RAWIO, and must be calling this on the | 
 | 	 * whole block device, not on a partition.  This prevents overspray | 
 | 	 * between sibling partitions. | 
 | 	 */ | 
 | 	if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains)) | 
 | 		return -EPERM; | 
 |  | 
 | 	idata = mmc_blk_ioctl_copy_from_user(ic_ptr); | 
 | 	if (IS_ERR(idata)) | 
 | 		return PTR_ERR(idata); | 
 |  | 
 | 	md = mmc_blk_get(bdev->bd_disk); | 
 | 	if (!md) { | 
 | 		err = -EINVAL; | 
 | 		goto cmd_err; | 
 | 	} | 
 |  | 
 | 	card = md->queue.card; | 
 | 	if (IS_ERR(card)) { | 
 | 		err = PTR_ERR(card); | 
 | 		goto cmd_done; | 
 | 	} | 
 |  | 
 | 	mmc_get_card(card); | 
 |  | 
 | 	ioc_err = __mmc_blk_ioctl_cmd(card, md, idata); | 
 |  | 
 | 	/* Always switch back to main area after RPMB access */ | 
 | 	if (md->area_type & MMC_BLK_DATA_AREA_RPMB) | 
 | 		mmc_blk_part_switch(card, dev_get_drvdata(&card->dev)); | 
 |  | 
 | 	mmc_put_card(card); | 
 |  | 
 | 	err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata); | 
 |  | 
 | cmd_done: | 
 | 	mmc_blk_put(md); | 
 | cmd_err: | 
 | 	kfree(idata->buf); | 
 | 	kfree(idata); | 
 | 	return ioc_err ? ioc_err : err; | 
 | } | 
 |  | 
 | static int mmc_blk_ioctl_multi_cmd(struct block_device *bdev, | 
 | 				   struct mmc_ioc_multi_cmd __user *user) | 
 | { | 
 | 	struct mmc_blk_ioc_data **idata = NULL; | 
 | 	struct mmc_ioc_cmd __user *cmds = user->cmds; | 
 | 	struct mmc_card *card; | 
 | 	struct mmc_blk_data *md; | 
 | 	int i, err = 0, ioc_err = 0; | 
 | 	__u64 num_of_cmds; | 
 |  | 
 | 	/* | 
 | 	 * The caller must have CAP_SYS_RAWIO, and must be calling this on the | 
 | 	 * whole block device, not on a partition.  This prevents overspray | 
 | 	 * between sibling partitions. | 
 | 	 */ | 
 | 	if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains)) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (copy_from_user(&num_of_cmds, &user->num_of_cmds, | 
 | 			   sizeof(num_of_cmds))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (num_of_cmds > MMC_IOC_MAX_CMDS) | 
 | 		return -EINVAL; | 
 |  | 
 | 	idata = kcalloc(num_of_cmds, sizeof(*idata), GFP_KERNEL); | 
 | 	if (!idata) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	for (i = 0; i < num_of_cmds; i++) { | 
 | 		idata[i] = mmc_blk_ioctl_copy_from_user(&cmds[i]); | 
 | 		if (IS_ERR(idata[i])) { | 
 | 			err = PTR_ERR(idata[i]); | 
 | 			num_of_cmds = i; | 
 | 			goto cmd_err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	md = mmc_blk_get(bdev->bd_disk); | 
 | 	if (!md) { | 
 | 		err = -EINVAL; | 
 | 		goto cmd_err; | 
 | 	} | 
 |  | 
 | 	card = md->queue.card; | 
 | 	if (IS_ERR(card)) { | 
 | 		err = PTR_ERR(card); | 
 | 		goto cmd_done; | 
 | 	} | 
 |  | 
 | 	mmc_get_card(card); | 
 |  | 
 | 	for (i = 0; i < num_of_cmds && !ioc_err; i++) | 
 | 		ioc_err = __mmc_blk_ioctl_cmd(card, md, idata[i]); | 
 |  | 
 | 	/* Always switch back to main area after RPMB access */ | 
 | 	if (md->area_type & MMC_BLK_DATA_AREA_RPMB) | 
 | 		mmc_blk_part_switch(card, dev_get_drvdata(&card->dev)); | 
 |  | 
 | 	mmc_put_card(card); | 
 |  | 
 | 	/* copy to user if data and response */ | 
 | 	for (i = 0; i < num_of_cmds && !err; i++) | 
 | 		err = mmc_blk_ioctl_copy_to_user(&cmds[i], idata[i]); | 
 |  | 
 | cmd_done: | 
 | 	mmc_blk_put(md); | 
 | cmd_err: | 
 | 	for (i = 0; i < num_of_cmds; i++) { | 
 | 		kfree(idata[i]->buf); | 
 | 		kfree(idata[i]); | 
 | 	} | 
 | 	kfree(idata); | 
 | 	return ioc_err ? ioc_err : err; | 
 | } | 
 |  | 
 | static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, | 
 | 	unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	switch (cmd) { | 
 | 	case MMC_IOC_CMD: | 
 | 		return mmc_blk_ioctl_cmd(bdev, | 
 | 				(struct mmc_ioc_cmd __user *)arg); | 
 | 	case MMC_IOC_MULTI_CMD: | 
 | 		return mmc_blk_ioctl_multi_cmd(bdev, | 
 | 				(struct mmc_ioc_multi_cmd __user *)arg); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode, | 
 | 	unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg)); | 
 | } | 
 | #endif | 
 |  | 
 | static const struct block_device_operations mmc_bdops = { | 
 | 	.open			= mmc_blk_open, | 
 | 	.release		= mmc_blk_release, | 
 | 	.getgeo			= mmc_blk_getgeo, | 
 | 	.owner			= THIS_MODULE, | 
 | 	.ioctl			= mmc_blk_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl		= mmc_blk_compat_ioctl, | 
 | #endif | 
 | }; | 
 |  | 
 | static inline int mmc_blk_part_switch(struct mmc_card *card, | 
 | 				      struct mmc_blk_data *md) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev); | 
 |  | 
 | 	if (main_md->part_curr == md->part_type) | 
 | 		return 0; | 
 |  | 
 | 	if (mmc_card_mmc(card)) { | 
 | 		u8 part_config = card->ext_csd.part_config; | 
 |  | 
 | 		if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) | 
 | 			mmc_retune_pause(card->host); | 
 |  | 
 | 		part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; | 
 | 		part_config |= md->part_type; | 
 |  | 
 | 		ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
 | 				 EXT_CSD_PART_CONFIG, part_config, | 
 | 				 card->ext_csd.part_time); | 
 | 		if (ret) { | 
 | 			if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) | 
 | 				mmc_retune_unpause(card->host); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		card->ext_csd.part_config = part_config; | 
 |  | 
 | 		if (main_md->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB) | 
 | 			mmc_retune_unpause(card->host); | 
 | 	} | 
 |  | 
 | 	main_md->part_curr = md->part_type; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) | 
 | { | 
 | 	int err; | 
 | 	u32 result; | 
 | 	__be32 *blocks; | 
 |  | 
 | 	struct mmc_request mrq = {NULL}; | 
 | 	struct mmc_command cmd = {0}; | 
 | 	struct mmc_data data = {0}; | 
 |  | 
 | 	struct scatterlist sg; | 
 |  | 
 | 	cmd.opcode = MMC_APP_CMD; | 
 | 	cmd.arg = card->rca << 16; | 
 | 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | 
 |  | 
 | 	err = mmc_wait_for_cmd(card->host, &cmd, 0); | 
 | 	if (err) | 
 | 		return (u32)-1; | 
 | 	if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD)) | 
 | 		return (u32)-1; | 
 |  | 
 | 	memset(&cmd, 0, sizeof(struct mmc_command)); | 
 |  | 
 | 	cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; | 
 | 	cmd.arg = 0; | 
 | 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | 
 |  | 
 | 	data.blksz = 4; | 
 | 	data.blocks = 1; | 
 | 	data.flags = MMC_DATA_READ; | 
 | 	data.sg = &sg; | 
 | 	data.sg_len = 1; | 
 | 	mmc_set_data_timeout(&data, card); | 
 |  | 
 | 	mrq.cmd = &cmd; | 
 | 	mrq.data = &data; | 
 |  | 
 | 	blocks = kmalloc(4, GFP_KERNEL); | 
 | 	if (!blocks) | 
 | 		return (u32)-1; | 
 |  | 
 | 	sg_init_one(&sg, blocks, 4); | 
 |  | 
 | 	mmc_wait_for_req(card->host, &mrq); | 
 |  | 
 | 	result = ntohl(*blocks); | 
 | 	kfree(blocks); | 
 |  | 
 | 	if (cmd.error || data.error) | 
 | 		result = (u32)-1; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int get_card_status(struct mmc_card *card, u32 *status, int retries) | 
 | { | 
 | 	struct mmc_command cmd = {0}; | 
 | 	int err; | 
 |  | 
 | 	cmd.opcode = MMC_SEND_STATUS; | 
 | 	if (!mmc_host_is_spi(card->host)) | 
 | 		cmd.arg = card->rca << 16; | 
 | 	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; | 
 | 	err = mmc_wait_for_cmd(card->host, &cmd, retries); | 
 | 	if (err == 0) | 
 | 		*status = cmd.resp[0]; | 
 | 	return err; | 
 | } | 
 |  | 
 | static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, | 
 | 		bool hw_busy_detect, struct request *req, int *gen_err) | 
 | { | 
 | 	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); | 
 | 	int err = 0; | 
 | 	u32 status; | 
 |  | 
 | 	do { | 
 | 		err = get_card_status(card, &status, 5); | 
 | 		if (err) { | 
 | 			pr_err("%s: error %d requesting status\n", | 
 | 			       req->rq_disk->disk_name, err); | 
 | 			return err; | 
 | 		} | 
 |  | 
 | 		if (status & R1_ERROR) { | 
 | 			pr_err("%s: %s: error sending status cmd, status %#x\n", | 
 | 				req->rq_disk->disk_name, __func__, status); | 
 | 			*gen_err = 1; | 
 | 		} | 
 |  | 
 | 		/* We may rely on the host hw to handle busy detection.*/ | 
 | 		if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && | 
 | 			hw_busy_detect) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * Timeout if the device never becomes ready for data and never | 
 | 		 * leaves the program state. | 
 | 		 */ | 
 | 		if (time_after(jiffies, timeout)) { | 
 | 			pr_err("%s: Card stuck in programming state! %s %s\n", | 
 | 				mmc_hostname(card->host), | 
 | 				req->rq_disk->disk_name, __func__); | 
 | 			return -ETIMEDOUT; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Some cards mishandle the status bits, | 
 | 		 * so make sure to check both the busy | 
 | 		 * indication and the card state. | 
 | 		 */ | 
 | 	} while (!(status & R1_READY_FOR_DATA) || | 
 | 		 (R1_CURRENT_STATE(status) == R1_STATE_PRG)); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int send_stop(struct mmc_card *card, unsigned int timeout_ms, | 
 | 		struct request *req, int *gen_err, u32 *stop_status) | 
 | { | 
 | 	struct mmc_host *host = card->host; | 
 | 	struct mmc_command cmd = {0}; | 
 | 	int err; | 
 | 	bool use_r1b_resp = rq_data_dir(req) == WRITE; | 
 |  | 
 | 	/* | 
 | 	 * Normally we use R1B responses for WRITE, but in cases where the host | 
 | 	 * has specified a max_busy_timeout we need to validate it. A failure | 
 | 	 * means we need to prevent the host from doing hw busy detection, which | 
 | 	 * is done by converting to a R1 response instead. | 
 | 	 */ | 
 | 	if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) | 
 | 		use_r1b_resp = false; | 
 |  | 
 | 	cmd.opcode = MMC_STOP_TRANSMISSION; | 
 | 	if (use_r1b_resp) { | 
 | 		cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; | 
 | 		cmd.busy_timeout = timeout_ms; | 
 | 	} else { | 
 | 		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; | 
 | 	} | 
 |  | 
 | 	err = mmc_wait_for_cmd(host, &cmd, 5); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	*stop_status = cmd.resp[0]; | 
 |  | 
 | 	/* No need to check card status in case of READ. */ | 
 | 	if (rq_data_dir(req) == READ) | 
 | 		return 0; | 
 |  | 
 | 	if (!mmc_host_is_spi(host) && | 
 | 		(*stop_status & R1_ERROR)) { | 
 | 		pr_err("%s: %s: general error sending stop command, resp %#x\n", | 
 | 			req->rq_disk->disk_name, __func__, *stop_status); | 
 | 		*gen_err = 1; | 
 | 	} | 
 |  | 
 | 	return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err); | 
 | } | 
 |  | 
 | #define ERR_NOMEDIUM	3 | 
 | #define ERR_RETRY	2 | 
 | #define ERR_ABORT	1 | 
 | #define ERR_CONTINUE	0 | 
 |  | 
 | static int mmc_blk_cmd_error(struct request *req, const char *name, int error, | 
 | 	bool status_valid, u32 status) | 
 | { | 
 | 	switch (error) { | 
 | 	case -EILSEQ: | 
 | 		/* response crc error, retry the r/w cmd */ | 
 | 		pr_err("%s: %s sending %s command, card status %#x\n", | 
 | 			req->rq_disk->disk_name, "response CRC error", | 
 | 			name, status); | 
 | 		return ERR_RETRY; | 
 |  | 
 | 	case -ETIMEDOUT: | 
 | 		pr_err("%s: %s sending %s command, card status %#x\n", | 
 | 			req->rq_disk->disk_name, "timed out", name, status); | 
 |  | 
 | 		/* If the status cmd initially failed, retry the r/w cmd */ | 
 | 		if (!status_valid) { | 
 | 			pr_err("%s: status not valid, retrying timeout\n", | 
 | 				req->rq_disk->disk_name); | 
 | 			return ERR_RETRY; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If it was a r/w cmd crc error, or illegal command | 
 | 		 * (eg, issued in wrong state) then retry - we should | 
 | 		 * have corrected the state problem above. | 
 | 		 */ | 
 | 		if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) { | 
 | 			pr_err("%s: command error, retrying timeout\n", | 
 | 				req->rq_disk->disk_name); | 
 | 			return ERR_RETRY; | 
 | 		} | 
 |  | 
 | 		/* Otherwise abort the command */ | 
 | 		return ERR_ABORT; | 
 |  | 
 | 	default: | 
 | 		/* We don't understand the error code the driver gave us */ | 
 | 		pr_err("%s: unknown error %d sending read/write command, card status %#x\n", | 
 | 		       req->rq_disk->disk_name, error, status); | 
 | 		return ERR_ABORT; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Initial r/w and stop cmd error recovery. | 
 |  * We don't know whether the card received the r/w cmd or not, so try to | 
 |  * restore things back to a sane state.  Essentially, we do this as follows: | 
 |  * - Obtain card status.  If the first attempt to obtain card status fails, | 
 |  *   the status word will reflect the failed status cmd, not the failed | 
 |  *   r/w cmd.  If we fail to obtain card status, it suggests we can no | 
 |  *   longer communicate with the card. | 
 |  * - Check the card state.  If the card received the cmd but there was a | 
 |  *   transient problem with the response, it might still be in a data transfer | 
 |  *   mode.  Try to send it a stop command.  If this fails, we can't recover. | 
 |  * - If the r/w cmd failed due to a response CRC error, it was probably | 
 |  *   transient, so retry the cmd. | 
 |  * - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry. | 
 |  * - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or | 
 |  *   illegal cmd, retry. | 
 |  * Otherwise we don't understand what happened, so abort. | 
 |  */ | 
 | static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, | 
 | 	struct mmc_blk_request *brq, int *ecc_err, int *gen_err) | 
 | { | 
 | 	bool prev_cmd_status_valid = true; | 
 | 	u32 status, stop_status = 0; | 
 | 	int err, retry; | 
 |  | 
 | 	if (mmc_card_removed(card)) | 
 | 		return ERR_NOMEDIUM; | 
 |  | 
 | 	/* | 
 | 	 * Try to get card status which indicates both the card state | 
 | 	 * and why there was no response.  If the first attempt fails, | 
 | 	 * we can't be sure the returned status is for the r/w command. | 
 | 	 */ | 
 | 	for (retry = 2; retry >= 0; retry--) { | 
 | 		err = get_card_status(card, &status, 0); | 
 | 		if (!err) | 
 | 			break; | 
 |  | 
 | 		/* Re-tune if needed */ | 
 | 		mmc_retune_recheck(card->host); | 
 |  | 
 | 		prev_cmd_status_valid = false; | 
 | 		pr_err("%s: error %d sending status command, %sing\n", | 
 | 		       req->rq_disk->disk_name, err, retry ? "retry" : "abort"); | 
 | 	} | 
 |  | 
 | 	/* We couldn't get a response from the card.  Give up. */ | 
 | 	if (err) { | 
 | 		/* Check if the card is removed */ | 
 | 		if (mmc_detect_card_removed(card->host)) | 
 | 			return ERR_NOMEDIUM; | 
 | 		return ERR_ABORT; | 
 | 	} | 
 |  | 
 | 	/* Flag ECC errors */ | 
 | 	if ((status & R1_CARD_ECC_FAILED) || | 
 | 	    (brq->stop.resp[0] & R1_CARD_ECC_FAILED) || | 
 | 	    (brq->cmd.resp[0] & R1_CARD_ECC_FAILED)) | 
 | 		*ecc_err = 1; | 
 |  | 
 | 	/* Flag General errors */ | 
 | 	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) | 
 | 		if ((status & R1_ERROR) || | 
 | 			(brq->stop.resp[0] & R1_ERROR)) { | 
 | 			pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n", | 
 | 			       req->rq_disk->disk_name, __func__, | 
 | 			       brq->stop.resp[0], status); | 
 | 			*gen_err = 1; | 
 | 		} | 
 |  | 
 | 	/* | 
 | 	 * Check the current card state.  If it is in some data transfer | 
 | 	 * mode, tell it to stop (and hopefully transition back to TRAN.) | 
 | 	 */ | 
 | 	if (R1_CURRENT_STATE(status) == R1_STATE_DATA || | 
 | 	    R1_CURRENT_STATE(status) == R1_STATE_RCV) { | 
 | 		err = send_stop(card, | 
 | 			DIV_ROUND_UP(brq->data.timeout_ns, 1000000), | 
 | 			req, gen_err, &stop_status); | 
 | 		if (err) { | 
 | 			pr_err("%s: error %d sending stop command\n", | 
 | 			       req->rq_disk->disk_name, err); | 
 | 			/* | 
 | 			 * If the stop cmd also timed out, the card is probably | 
 | 			 * not present, so abort. Other errors are bad news too. | 
 | 			 */ | 
 | 			return ERR_ABORT; | 
 | 		} | 
 |  | 
 | 		if (stop_status & R1_CARD_ECC_FAILED) | 
 | 			*ecc_err = 1; | 
 | 	} | 
 |  | 
 | 	/* Check for set block count errors */ | 
 | 	if (brq->sbc.error) | 
 | 		return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error, | 
 | 				prev_cmd_status_valid, status); | 
 |  | 
 | 	/* Check for r/w command errors */ | 
 | 	if (brq->cmd.error) | 
 | 		return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error, | 
 | 				prev_cmd_status_valid, status); | 
 |  | 
 | 	/* Data errors */ | 
 | 	if (!brq->stop.error) | 
 | 		return ERR_CONTINUE; | 
 |  | 
 | 	/* Now for stop errors.  These aren't fatal to the transfer. */ | 
 | 	pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n", | 
 | 	       req->rq_disk->disk_name, brq->stop.error, | 
 | 	       brq->cmd.resp[0], status); | 
 |  | 
 | 	/* | 
 | 	 * Subsitute in our own stop status as this will give the error | 
 | 	 * state which happened during the execution of the r/w command. | 
 | 	 */ | 
 | 	if (stop_status) { | 
 | 		brq->stop.resp[0] = stop_status; | 
 | 		brq->stop.error = 0; | 
 | 	} | 
 | 	return ERR_CONTINUE; | 
 | } | 
 |  | 
 | static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, | 
 | 			 int type) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (md->reset_done & type) | 
 | 		return -EEXIST; | 
 |  | 
 | 	md->reset_done |= type; | 
 | 	err = mmc_hw_reset(host); | 
 | 	/* Ensure we switch back to the correct partition */ | 
 | 	if (err != -EOPNOTSUPP) { | 
 | 		struct mmc_blk_data *main_md = | 
 | 			dev_get_drvdata(&host->card->dev); | 
 | 		int part_err; | 
 |  | 
 | 		main_md->part_curr = main_md->part_type; | 
 | 		part_err = mmc_blk_part_switch(host->card, md); | 
 | 		if (part_err) { | 
 | 			/* | 
 | 			 * We have failed to get back into the correct | 
 | 			 * partition, so we need to abort the whole request. | 
 | 			 */ | 
 | 			return -ENODEV; | 
 | 		} | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) | 
 | { | 
 | 	md->reset_done &= ~type; | 
 | } | 
 |  | 
 | int mmc_access_rpmb(struct mmc_queue *mq) | 
 | { | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	/* | 
 | 	 * If this is a RPMB partition access, return ture | 
 | 	 */ | 
 | 	if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) | 
 | 		return true; | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) | 
 | { | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	unsigned int from, nr, arg; | 
 | 	int err = 0, type = MMC_BLK_DISCARD; | 
 |  | 
 | 	if (!mmc_can_erase(card)) { | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	from = blk_rq_pos(req); | 
 | 	nr = blk_rq_sectors(req); | 
 |  | 
 | 	if (mmc_can_discard(card)) | 
 | 		arg = MMC_DISCARD_ARG; | 
 | 	else if (mmc_can_trim(card)) | 
 | 		arg = MMC_TRIM_ARG; | 
 | 	else | 
 | 		arg = MMC_ERASE_ARG; | 
 | retry: | 
 | 	if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
 | 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
 | 				 INAND_CMD38_ARG_EXT_CSD, | 
 | 				 arg == MMC_TRIM_ARG ? | 
 | 				 INAND_CMD38_ARG_TRIM : | 
 | 				 INAND_CMD38_ARG_ERASE, | 
 | 				 0); | 
 | 		if (err) | 
 | 			goto out; | 
 | 	} | 
 | 	err = mmc_erase(card, from, nr, arg); | 
 | out: | 
 | 	if (err == -EIO && !mmc_blk_reset(md, card->host, type)) | 
 | 		goto retry; | 
 | 	if (!err) | 
 | 		mmc_blk_reset_success(md, type); | 
 | 	blk_end_request(req, err, blk_rq_bytes(req)); | 
 |  | 
 | 	return err ? 0 : 1; | 
 | } | 
 |  | 
 | static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, | 
 | 				       struct request *req) | 
 | { | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	unsigned int from, nr, arg; | 
 | 	int err = 0, type = MMC_BLK_SECDISCARD; | 
 |  | 
 | 	if (!(mmc_can_secure_erase_trim(card))) { | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	from = blk_rq_pos(req); | 
 | 	nr = blk_rq_sectors(req); | 
 |  | 
 | 	if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) | 
 | 		arg = MMC_SECURE_TRIM1_ARG; | 
 | 	else | 
 | 		arg = MMC_SECURE_ERASE_ARG; | 
 |  | 
 | retry: | 
 | 	if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
 | 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
 | 				 INAND_CMD38_ARG_EXT_CSD, | 
 | 				 arg == MMC_SECURE_TRIM1_ARG ? | 
 | 				 INAND_CMD38_ARG_SECTRIM1 : | 
 | 				 INAND_CMD38_ARG_SECERASE, | 
 | 				 0); | 
 | 		if (err) | 
 | 			goto out_retry; | 
 | 	} | 
 |  | 
 | 	err = mmc_erase(card, from, nr, arg); | 
 | 	if (err == -EIO) | 
 | 		goto out_retry; | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	if (arg == MMC_SECURE_TRIM1_ARG) { | 
 | 		if (card->quirks & MMC_QUIRK_INAND_CMD38) { | 
 | 			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
 | 					 INAND_CMD38_ARG_EXT_CSD, | 
 | 					 INAND_CMD38_ARG_SECTRIM2, | 
 | 					 0); | 
 | 			if (err) | 
 | 				goto out_retry; | 
 | 		} | 
 |  | 
 | 		err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); | 
 | 		if (err == -EIO) | 
 | 			goto out_retry; | 
 | 		if (err) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | out_retry: | 
 | 	if (err && !mmc_blk_reset(md, card->host, type)) | 
 | 		goto retry; | 
 | 	if (!err) | 
 | 		mmc_blk_reset_success(md, type); | 
 | out: | 
 | 	blk_end_request(req, err, blk_rq_bytes(req)); | 
 |  | 
 | 	return err ? 0 : 1; | 
 | } | 
 |  | 
 | static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) | 
 | { | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	int ret = 0; | 
 |  | 
 | 	ret = mmc_flush_cache(card); | 
 | 	if (ret) | 
 | 		ret = -EIO; | 
 |  | 
 | 	blk_end_request_all(req, ret); | 
 |  | 
 | 	return ret ? 0 : 1; | 
 | } | 
 |  | 
 | /* | 
 |  * Reformat current write as a reliable write, supporting | 
 |  * both legacy and the enhanced reliable write MMC cards. | 
 |  * In each transfer we'll handle only as much as a single | 
 |  * reliable write can handle, thus finish the request in | 
 |  * partial completions. | 
 |  */ | 
 | static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, | 
 | 				    struct mmc_card *card, | 
 | 				    struct request *req) | 
 | { | 
 | 	if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) { | 
 | 		/* Legacy mode imposes restrictions on transfers. */ | 
 | 		if (!IS_ALIGNED(brq->cmd.arg, card->ext_csd.rel_sectors)) | 
 | 			brq->data.blocks = 1; | 
 |  | 
 | 		if (brq->data.blocks > card->ext_csd.rel_sectors) | 
 | 			brq->data.blocks = card->ext_csd.rel_sectors; | 
 | 		else if (brq->data.blocks < card->ext_csd.rel_sectors) | 
 | 			brq->data.blocks = 1; | 
 | 	} | 
 | } | 
 |  | 
 | #define CMD_ERRORS							\ | 
 | 	(R1_OUT_OF_RANGE |	/* Command argument out of range */	\ | 
 | 	 R1_ADDRESS_ERROR |	/* Misaligned address */		\ | 
 | 	 R1_BLOCK_LEN_ERROR |	/* Transferred block length incorrect */\ | 
 | 	 R1_WP_VIOLATION |	/* Tried to write to protected block */	\ | 
 | 	 R1_CC_ERROR |		/* Card controller error */		\ | 
 | 	 R1_ERROR)		/* General/unknown error */ | 
 |  | 
 | static int mmc_blk_err_check(struct mmc_card *card, | 
 | 			     struct mmc_async_req *areq) | 
 | { | 
 | 	struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req, | 
 | 						    mmc_active); | 
 | 	struct mmc_blk_request *brq = &mq_mrq->brq; | 
 | 	struct request *req = mq_mrq->req; | 
 | 	int need_retune = card->host->need_retune; | 
 | 	int ecc_err = 0, gen_err = 0; | 
 |  | 
 | 	/* | 
 | 	 * sbc.error indicates a problem with the set block count | 
 | 	 * command.  No data will have been transferred. | 
 | 	 * | 
 | 	 * cmd.error indicates a problem with the r/w command.  No | 
 | 	 * data will have been transferred. | 
 | 	 * | 
 | 	 * stop.error indicates a problem with the stop command.  Data | 
 | 	 * may have been transferred, or may still be transferring. | 
 | 	 */ | 
 | 	if (brq->sbc.error || brq->cmd.error || brq->stop.error || | 
 | 	    brq->data.error) { | 
 | 		switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) { | 
 | 		case ERR_RETRY: | 
 | 			return MMC_BLK_RETRY; | 
 | 		case ERR_ABORT: | 
 | 			return MMC_BLK_ABORT; | 
 | 		case ERR_NOMEDIUM: | 
 | 			return MMC_BLK_NOMEDIUM; | 
 | 		case ERR_CONTINUE: | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check for errors relating to the execution of the | 
 | 	 * initial command - such as address errors.  No data | 
 | 	 * has been transferred. | 
 | 	 */ | 
 | 	if (brq->cmd.resp[0] & CMD_ERRORS) { | 
 | 		pr_err("%s: r/w command failed, status = %#x\n", | 
 | 		       req->rq_disk->disk_name, brq->cmd.resp[0]); | 
 | 		return MMC_BLK_ABORT; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Everything else is either success, or a data error of some | 
 | 	 * kind.  If it was a write, we may have transitioned to | 
 | 	 * program mode, which we have to wait for it to complete. | 
 | 	 */ | 
 | 	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { | 
 | 		int err; | 
 |  | 
 | 		/* Check stop command response */ | 
 | 		if (brq->stop.resp[0] & R1_ERROR) { | 
 | 			pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", | 
 | 			       req->rq_disk->disk_name, __func__, | 
 | 			       brq->stop.resp[0]); | 
 | 			gen_err = 1; | 
 | 		} | 
 |  | 
 | 		err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req, | 
 | 					&gen_err); | 
 | 		if (err) | 
 | 			return MMC_BLK_CMD_ERR; | 
 | 	} | 
 |  | 
 | 	/* if general error occurs, retry the write operation. */ | 
 | 	if (gen_err) { | 
 | 		pr_warn("%s: retrying write for general error\n", | 
 | 				req->rq_disk->disk_name); | 
 | 		return MMC_BLK_RETRY; | 
 | 	} | 
 |  | 
 | 	if (brq->data.error) { | 
 | 		if (need_retune && !brq->retune_retry_done) { | 
 | 			pr_debug("%s: retrying because a re-tune was needed\n", | 
 | 				 req->rq_disk->disk_name); | 
 | 			brq->retune_retry_done = 1; | 
 | 			return MMC_BLK_RETRY; | 
 | 		} | 
 | 		pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", | 
 | 		       req->rq_disk->disk_name, brq->data.error, | 
 | 		       (unsigned)blk_rq_pos(req), | 
 | 		       (unsigned)blk_rq_sectors(req), | 
 | 		       brq->cmd.resp[0], brq->stop.resp[0]); | 
 |  | 
 | 		if (rq_data_dir(req) == READ) { | 
 | 			if (ecc_err) | 
 | 				return MMC_BLK_ECC_ERR; | 
 | 			return MMC_BLK_DATA_ERR; | 
 | 		} else { | 
 | 			return MMC_BLK_CMD_ERR; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!brq->data.bytes_xfered) | 
 | 		return MMC_BLK_RETRY; | 
 |  | 
 | 	if (mmc_packed_cmd(mq_mrq->cmd_type)) { | 
 | 		if (unlikely(brq->data.blocks << 9 != brq->data.bytes_xfered)) | 
 | 			return MMC_BLK_PARTIAL; | 
 | 		else | 
 | 			return MMC_BLK_SUCCESS; | 
 | 	} | 
 |  | 
 | 	if (blk_rq_bytes(req) != brq->data.bytes_xfered) | 
 | 		return MMC_BLK_PARTIAL; | 
 |  | 
 | 	return MMC_BLK_SUCCESS; | 
 | } | 
 |  | 
 | static int mmc_blk_packed_err_check(struct mmc_card *card, | 
 | 				    struct mmc_async_req *areq) | 
 | { | 
 | 	struct mmc_queue_req *mq_rq = container_of(areq, struct mmc_queue_req, | 
 | 			mmc_active); | 
 | 	struct request *req = mq_rq->req; | 
 | 	struct mmc_packed *packed = mq_rq->packed; | 
 | 	int err, check, status; | 
 | 	u8 *ext_csd; | 
 |  | 
 | 	packed->retries--; | 
 | 	check = mmc_blk_err_check(card, areq); | 
 | 	err = get_card_status(card, &status, 0); | 
 | 	if (err) { | 
 | 		pr_err("%s: error %d sending status command\n", | 
 | 		       req->rq_disk->disk_name, err); | 
 | 		return MMC_BLK_ABORT; | 
 | 	} | 
 |  | 
 | 	if (status & R1_EXCEPTION_EVENT) { | 
 | 		err = mmc_get_ext_csd(card, &ext_csd); | 
 | 		if (err) { | 
 | 			pr_err("%s: error %d sending ext_csd\n", | 
 | 			       req->rq_disk->disk_name, err); | 
 | 			return MMC_BLK_ABORT; | 
 | 		} | 
 |  | 
 | 		if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] & | 
 | 		     EXT_CSD_PACKED_FAILURE) && | 
 | 		    (ext_csd[EXT_CSD_PACKED_CMD_STATUS] & | 
 | 		     EXT_CSD_PACKED_GENERIC_ERROR)) { | 
 | 			if (ext_csd[EXT_CSD_PACKED_CMD_STATUS] & | 
 | 			    EXT_CSD_PACKED_INDEXED_ERROR) { | 
 | 				packed->idx_failure = | 
 | 				  ext_csd[EXT_CSD_PACKED_FAILURE_INDEX] - 1; | 
 | 				check = MMC_BLK_PARTIAL; | 
 | 			} | 
 | 			pr_err("%s: packed cmd failed, nr %u, sectors %u, " | 
 | 			       "failure index: %d\n", | 
 | 			       req->rq_disk->disk_name, packed->nr_entries, | 
 | 			       packed->blocks, packed->idx_failure); | 
 | 		} | 
 | 		kfree(ext_csd); | 
 | 	} | 
 |  | 
 | 	return check; | 
 | } | 
 |  | 
 | static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, | 
 | 			       struct mmc_card *card, | 
 | 			       int disable_multi, | 
 | 			       struct mmc_queue *mq) | 
 | { | 
 | 	u32 readcmd, writecmd; | 
 | 	struct mmc_blk_request *brq = &mqrq->brq; | 
 | 	struct request *req = mqrq->req; | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	bool do_data_tag; | 
 |  | 
 | 	/* | 
 | 	 * Reliable writes are used to implement Forced Unit Access and | 
 | 	 * are supported only on MMCs. | 
 | 	 */ | 
 | 	bool do_rel_wr = (req->cmd_flags & REQ_FUA) && | 
 | 		(rq_data_dir(req) == WRITE) && | 
 | 		(md->flags & MMC_BLK_REL_WR); | 
 |  | 
 | 	memset(brq, 0, sizeof(struct mmc_blk_request)); | 
 | 	brq->mrq.cmd = &brq->cmd; | 
 | 	brq->mrq.data = &brq->data; | 
 |  | 
 | 	brq->cmd.arg = blk_rq_pos(req); | 
 | 	if (!mmc_card_blockaddr(card)) | 
 | 		brq->cmd.arg <<= 9; | 
 | 	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | 
 | 	brq->data.blksz = 512; | 
 | 	brq->stop.opcode = MMC_STOP_TRANSMISSION; | 
 | 	brq->stop.arg = 0; | 
 | 	brq->data.blocks = blk_rq_sectors(req); | 
 |  | 
 | 	/* | 
 | 	 * The block layer doesn't support all sector count | 
 | 	 * restrictions, so we need to be prepared for too big | 
 | 	 * requests. | 
 | 	 */ | 
 | 	if (brq->data.blocks > card->host->max_blk_count) | 
 | 		brq->data.blocks = card->host->max_blk_count; | 
 |  | 
 | 	if (brq->data.blocks > 1) { | 
 | 		/* | 
 | 		 * After a read error, we redo the request one sector | 
 | 		 * at a time in order to accurately determine which | 
 | 		 * sectors can be read successfully. | 
 | 		 */ | 
 | 		if (disable_multi) | 
 | 			brq->data.blocks = 1; | 
 |  | 
 | 		/* | 
 | 		 * Some controllers have HW issues while operating | 
 | 		 * in multiple I/O mode | 
 | 		 */ | 
 | 		if (card->host->ops->multi_io_quirk) | 
 | 			brq->data.blocks = card->host->ops->multi_io_quirk(card, | 
 | 						(rq_data_dir(req) == READ) ? | 
 | 						MMC_DATA_READ : MMC_DATA_WRITE, | 
 | 						brq->data.blocks); | 
 | 	} | 
 |  | 
 | 	if (brq->data.blocks > 1 || do_rel_wr) { | 
 | 		/* SPI multiblock writes terminate using a special | 
 | 		 * token, not a STOP_TRANSMISSION request. | 
 | 		 */ | 
 | 		if (!mmc_host_is_spi(card->host) || | 
 | 		    rq_data_dir(req) == READ) | 
 | 			brq->mrq.stop = &brq->stop; | 
 | 		readcmd = MMC_READ_MULTIPLE_BLOCK; | 
 | 		writecmd = MMC_WRITE_MULTIPLE_BLOCK; | 
 | 	} else { | 
 | 		brq->mrq.stop = NULL; | 
 | 		readcmd = MMC_READ_SINGLE_BLOCK; | 
 | 		writecmd = MMC_WRITE_BLOCK; | 
 | 	} | 
 | 	if (rq_data_dir(req) == READ) { | 
 | 		brq->cmd.opcode = readcmd; | 
 | 		brq->data.flags = MMC_DATA_READ; | 
 | 		if (brq->mrq.stop) | 
 | 			brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | | 
 | 					MMC_CMD_AC; | 
 | 	} else { | 
 | 		brq->cmd.opcode = writecmd; | 
 | 		brq->data.flags = MMC_DATA_WRITE; | 
 | 		if (brq->mrq.stop) | 
 | 			brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | | 
 | 					MMC_CMD_AC; | 
 | 	} | 
 |  | 
 | 	if (do_rel_wr) | 
 | 		mmc_apply_rel_rw(brq, card, req); | 
 |  | 
 | 	/* | 
 | 	 * Data tag is used only during writing meta data to speed | 
 | 	 * up write and any subsequent read of this meta data | 
 | 	 */ | 
 | 	do_data_tag = (card->ext_csd.data_tag_unit_size) && | 
 | 		(req->cmd_flags & REQ_META) && | 
 | 		(rq_data_dir(req) == WRITE) && | 
 | 		((brq->data.blocks * brq->data.blksz) >= | 
 | 		 card->ext_csd.data_tag_unit_size); | 
 |  | 
 | 	/* | 
 | 	 * Pre-defined multi-block transfers are preferable to | 
 | 	 * open ended-ones (and necessary for reliable writes). | 
 | 	 * However, it is not sufficient to just send CMD23, | 
 | 	 * and avoid the final CMD12, as on an error condition | 
 | 	 * CMD12 (stop) needs to be sent anyway. This, coupled | 
 | 	 * with Auto-CMD23 enhancements provided by some | 
 | 	 * hosts, means that the complexity of dealing | 
 | 	 * with this is best left to the host. If CMD23 is | 
 | 	 * supported by card and host, we'll fill sbc in and let | 
 | 	 * the host deal with handling it correctly. This means | 
 | 	 * that for hosts that don't expose MMC_CAP_CMD23, no | 
 | 	 * change of behavior will be observed. | 
 | 	 * | 
 | 	 * N.B: Some MMC cards experience perf degradation. | 
 | 	 * We'll avoid using CMD23-bounded multiblock writes for | 
 | 	 * these, while retaining features like reliable writes. | 
 | 	 */ | 
 | 	if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && | 
 | 	    (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || | 
 | 	     do_data_tag)) { | 
 | 		brq->sbc.opcode = MMC_SET_BLOCK_COUNT; | 
 | 		brq->sbc.arg = brq->data.blocks | | 
 | 			(do_rel_wr ? (1 << 31) : 0) | | 
 | 			(do_data_tag ? (1 << 29) : 0); | 
 | 		brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; | 
 | 		brq->mrq.sbc = &brq->sbc; | 
 | 	} | 
 |  | 
 | 	mmc_set_data_timeout(&brq->data, card); | 
 |  | 
 | 	brq->data.sg = mqrq->sg; | 
 | 	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); | 
 |  | 
 | 	/* | 
 | 	 * Adjust the sg list so it is the same size as the | 
 | 	 * request. | 
 | 	 */ | 
 | 	if (brq->data.blocks != blk_rq_sectors(req)) { | 
 | 		int i, data_size = brq->data.blocks << 9; | 
 | 		struct scatterlist *sg; | 
 |  | 
 | 		for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { | 
 | 			data_size -= sg->length; | 
 | 			if (data_size <= 0) { | 
 | 				sg->length += data_size; | 
 | 				i++; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		brq->data.sg_len = i; | 
 | 	} | 
 |  | 
 | 	mqrq->mmc_active.mrq = &brq->mrq; | 
 | 	mqrq->mmc_active.err_check = mmc_blk_err_check; | 
 |  | 
 | 	mmc_queue_bounce_pre(mqrq); | 
 | } | 
 |  | 
 | static inline u8 mmc_calc_packed_hdr_segs(struct request_queue *q, | 
 | 					  struct mmc_card *card) | 
 | { | 
 | 	unsigned int hdr_sz = mmc_large_sector(card) ? 4096 : 512; | 
 | 	unsigned int max_seg_sz = queue_max_segment_size(q); | 
 | 	unsigned int len, nr_segs = 0; | 
 |  | 
 | 	do { | 
 | 		len = min(hdr_sz, max_seg_sz); | 
 | 		hdr_sz -= len; | 
 | 		nr_segs++; | 
 | 	} while (hdr_sz); | 
 |  | 
 | 	return nr_segs; | 
 | } | 
 |  | 
 | static u8 mmc_blk_prep_packed_list(struct mmc_queue *mq, struct request *req) | 
 | { | 
 | 	struct request_queue *q = mq->queue; | 
 | 	struct mmc_card *card = mq->card; | 
 | 	struct request *cur = req, *next = NULL; | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_queue_req *mqrq = mq->mqrq_cur; | 
 | 	bool en_rel_wr = card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN; | 
 | 	unsigned int req_sectors = 0, phys_segments = 0; | 
 | 	unsigned int max_blk_count, max_phys_segs; | 
 | 	bool put_back = true; | 
 | 	u8 max_packed_rw = 0; | 
 | 	u8 reqs = 0; | 
 |  | 
 | 	/* | 
 | 	 * We don't need to check packed for any further | 
 | 	 * operation of packed stuff as we set MMC_PACKED_NONE | 
 | 	 * and return zero for reqs if geting null packed. Also | 
 | 	 * we clean the flag of MMC_BLK_PACKED_CMD to avoid doing | 
 | 	 * it again when removing blk req. | 
 | 	 */ | 
 | 	if (!mqrq->packed) { | 
 | 		md->flags &= (~MMC_BLK_PACKED_CMD); | 
 | 		goto no_packed; | 
 | 	} | 
 |  | 
 | 	if (!(md->flags & MMC_BLK_PACKED_CMD)) | 
 | 		goto no_packed; | 
 |  | 
 | 	if ((rq_data_dir(cur) == WRITE) && | 
 | 	    mmc_host_packed_wr(card->host)) | 
 | 		max_packed_rw = card->ext_csd.max_packed_writes; | 
 |  | 
 | 	if (max_packed_rw == 0) | 
 | 		goto no_packed; | 
 |  | 
 | 	if (mmc_req_rel_wr(cur) && | 
 | 	    (md->flags & MMC_BLK_REL_WR) && !en_rel_wr) | 
 | 		goto no_packed; | 
 |  | 
 | 	if (mmc_large_sector(card) && | 
 | 	    !IS_ALIGNED(blk_rq_sectors(cur), 8)) | 
 | 		goto no_packed; | 
 |  | 
 | 	mmc_blk_clear_packed(mqrq); | 
 |  | 
 | 	max_blk_count = min(card->host->max_blk_count, | 
 | 			    card->host->max_req_size >> 9); | 
 | 	if (unlikely(max_blk_count > 0xffff)) | 
 | 		max_blk_count = 0xffff; | 
 |  | 
 | 	max_phys_segs = queue_max_segments(q); | 
 | 	req_sectors += blk_rq_sectors(cur); | 
 | 	phys_segments += cur->nr_phys_segments; | 
 |  | 
 | 	if (rq_data_dir(cur) == WRITE) { | 
 | 		req_sectors += mmc_large_sector(card) ? 8 : 1; | 
 | 		phys_segments += mmc_calc_packed_hdr_segs(q, card); | 
 | 	} | 
 |  | 
 | 	do { | 
 | 		if (reqs >= max_packed_rw - 1) { | 
 | 			put_back = false; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		spin_lock_irq(q->queue_lock); | 
 | 		next = blk_fetch_request(q); | 
 | 		spin_unlock_irq(q->queue_lock); | 
 | 		if (!next) { | 
 | 			put_back = false; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (mmc_large_sector(card) && | 
 | 		    !IS_ALIGNED(blk_rq_sectors(next), 8)) | 
 | 			break; | 
 |  | 
 | 		if (req_op(next) == REQ_OP_DISCARD || | 
 | 		    req_op(next) == REQ_OP_SECURE_ERASE || | 
 | 		    req_op(next) == REQ_OP_FLUSH) | 
 | 			break; | 
 |  | 
 | 		if (rq_data_dir(cur) != rq_data_dir(next)) | 
 | 			break; | 
 |  | 
 | 		if (mmc_req_rel_wr(next) && | 
 | 		    (md->flags & MMC_BLK_REL_WR) && !en_rel_wr) | 
 | 			break; | 
 |  | 
 | 		req_sectors += blk_rq_sectors(next); | 
 | 		if (req_sectors > max_blk_count) | 
 | 			break; | 
 |  | 
 | 		phys_segments +=  next->nr_phys_segments; | 
 | 		if (phys_segments > max_phys_segs) | 
 | 			break; | 
 |  | 
 | 		list_add_tail(&next->queuelist, &mqrq->packed->list); | 
 | 		cur = next; | 
 | 		reqs++; | 
 | 	} while (1); | 
 |  | 
 | 	if (put_back) { | 
 | 		spin_lock_irq(q->queue_lock); | 
 | 		blk_requeue_request(q, next); | 
 | 		spin_unlock_irq(q->queue_lock); | 
 | 	} | 
 |  | 
 | 	if (reqs > 0) { | 
 | 		list_add(&req->queuelist, &mqrq->packed->list); | 
 | 		mqrq->packed->nr_entries = ++reqs; | 
 | 		mqrq->packed->retries = reqs; | 
 | 		return reqs; | 
 | 	} | 
 |  | 
 | no_packed: | 
 | 	mqrq->cmd_type = MMC_PACKED_NONE; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq, | 
 | 					struct mmc_card *card, | 
 | 					struct mmc_queue *mq) | 
 | { | 
 | 	struct mmc_blk_request *brq = &mqrq->brq; | 
 | 	struct request *req = mqrq->req; | 
 | 	struct request *prq; | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_packed *packed = mqrq->packed; | 
 | 	bool do_rel_wr, do_data_tag; | 
 | 	__le32 *packed_cmd_hdr; | 
 | 	u8 hdr_blocks; | 
 | 	u8 i = 1; | 
 |  | 
 | 	mqrq->cmd_type = MMC_PACKED_WRITE; | 
 | 	packed->blocks = 0; | 
 | 	packed->idx_failure = MMC_PACKED_NR_IDX; | 
 |  | 
 | 	packed_cmd_hdr = packed->cmd_hdr; | 
 | 	memset(packed_cmd_hdr, 0, sizeof(packed->cmd_hdr)); | 
 | 	packed_cmd_hdr[0] = cpu_to_le32((packed->nr_entries << 16) | | 
 | 		(PACKED_CMD_WR << 8) | PACKED_CMD_VER); | 
 | 	hdr_blocks = mmc_large_sector(card) ? 8 : 1; | 
 |  | 
 | 	/* | 
 | 	 * Argument for each entry of packed group | 
 | 	 */ | 
 | 	list_for_each_entry(prq, &packed->list, queuelist) { | 
 | 		do_rel_wr = mmc_req_rel_wr(prq) && (md->flags & MMC_BLK_REL_WR); | 
 | 		do_data_tag = (card->ext_csd.data_tag_unit_size) && | 
 | 			(prq->cmd_flags & REQ_META) && | 
 | 			(rq_data_dir(prq) == WRITE) && | 
 | 			blk_rq_bytes(prq) >= card->ext_csd.data_tag_unit_size; | 
 | 		/* Argument of CMD23 */ | 
 | 		packed_cmd_hdr[(i * 2)] = cpu_to_le32( | 
 | 			(do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) | | 
 | 			(do_data_tag ? MMC_CMD23_ARG_TAG_REQ : 0) | | 
 | 			blk_rq_sectors(prq)); | 
 | 		/* Argument of CMD18 or CMD25 */ | 
 | 		packed_cmd_hdr[((i * 2)) + 1] = cpu_to_le32( | 
 | 			mmc_card_blockaddr(card) ? | 
 | 			blk_rq_pos(prq) : blk_rq_pos(prq) << 9); | 
 | 		packed->blocks += blk_rq_sectors(prq); | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	memset(brq, 0, sizeof(struct mmc_blk_request)); | 
 | 	brq->mrq.cmd = &brq->cmd; | 
 | 	brq->mrq.data = &brq->data; | 
 | 	brq->mrq.sbc = &brq->sbc; | 
 | 	brq->mrq.stop = &brq->stop; | 
 |  | 
 | 	brq->sbc.opcode = MMC_SET_BLOCK_COUNT; | 
 | 	brq->sbc.arg = MMC_CMD23_ARG_PACKED | (packed->blocks + hdr_blocks); | 
 | 	brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; | 
 |  | 
 | 	brq->cmd.opcode = MMC_WRITE_MULTIPLE_BLOCK; | 
 | 	brq->cmd.arg = blk_rq_pos(req); | 
 | 	if (!mmc_card_blockaddr(card)) | 
 | 		brq->cmd.arg <<= 9; | 
 | 	brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; | 
 |  | 
 | 	brq->data.blksz = 512; | 
 | 	brq->data.blocks = packed->blocks + hdr_blocks; | 
 | 	brq->data.flags = MMC_DATA_WRITE; | 
 |  | 
 | 	brq->stop.opcode = MMC_STOP_TRANSMISSION; | 
 | 	brq->stop.arg = 0; | 
 | 	brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; | 
 |  | 
 | 	mmc_set_data_timeout(&brq->data, card); | 
 |  | 
 | 	brq->data.sg = mqrq->sg; | 
 | 	brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); | 
 |  | 
 | 	mqrq->mmc_active.mrq = &brq->mrq; | 
 | 	mqrq->mmc_active.err_check = mmc_blk_packed_err_check; | 
 |  | 
 | 	mmc_queue_bounce_pre(mqrq); | 
 | } | 
 |  | 
 | static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card, | 
 | 			   struct mmc_blk_request *brq, struct request *req, | 
 | 			   int ret) | 
 | { | 
 | 	struct mmc_queue_req *mq_rq; | 
 | 	mq_rq = container_of(brq, struct mmc_queue_req, brq); | 
 |  | 
 | 	/* | 
 | 	 * If this is an SD card and we're writing, we can first | 
 | 	 * mark the known good sectors as ok. | 
 | 	 * | 
 | 	 * If the card is not SD, we can still ok written sectors | 
 | 	 * as reported by the controller (which might be less than | 
 | 	 * the real number of written sectors, but never more). | 
 | 	 */ | 
 | 	if (mmc_card_sd(card)) { | 
 | 		u32 blocks; | 
 |  | 
 | 		blocks = mmc_sd_num_wr_blocks(card); | 
 | 		if (blocks != (u32)-1) { | 
 | 			ret = blk_end_request(req, 0, blocks << 9); | 
 | 		} | 
 | 	} else { | 
 | 		if (!mmc_packed_cmd(mq_rq->cmd_type)) | 
 | 			ret = blk_end_request(req, 0, brq->data.bytes_xfered); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mmc_blk_end_packed_req(struct mmc_queue_req *mq_rq) | 
 | { | 
 | 	struct request *prq; | 
 | 	struct mmc_packed *packed = mq_rq->packed; | 
 | 	int idx = packed->idx_failure, i = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	while (!list_empty(&packed->list)) { | 
 | 		prq = list_entry_rq(packed->list.next); | 
 | 		if (idx == i) { | 
 | 			/* retry from error index */ | 
 | 			packed->nr_entries -= idx; | 
 | 			mq_rq->req = prq; | 
 | 			ret = 1; | 
 |  | 
 | 			if (packed->nr_entries == MMC_PACKED_NR_SINGLE) { | 
 | 				list_del_init(&prq->queuelist); | 
 | 				mmc_blk_clear_packed(mq_rq); | 
 | 			} | 
 | 			return ret; | 
 | 		} | 
 | 		list_del_init(&prq->queuelist); | 
 | 		blk_end_request(prq, 0, blk_rq_bytes(prq)); | 
 | 		i++; | 
 | 	} | 
 |  | 
 | 	mmc_blk_clear_packed(mq_rq); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void mmc_blk_abort_packed_req(struct mmc_queue_req *mq_rq) | 
 | { | 
 | 	struct request *prq; | 
 | 	struct mmc_packed *packed = mq_rq->packed; | 
 |  | 
 | 	while (!list_empty(&packed->list)) { | 
 | 		prq = list_entry_rq(packed->list.next); | 
 | 		list_del_init(&prq->queuelist); | 
 | 		blk_end_request(prq, -EIO, blk_rq_bytes(prq)); | 
 | 	} | 
 |  | 
 | 	mmc_blk_clear_packed(mq_rq); | 
 | } | 
 |  | 
 | static void mmc_blk_revert_packed_req(struct mmc_queue *mq, | 
 | 				      struct mmc_queue_req *mq_rq) | 
 | { | 
 | 	struct request *prq; | 
 | 	struct request_queue *q = mq->queue; | 
 | 	struct mmc_packed *packed = mq_rq->packed; | 
 |  | 
 | 	while (!list_empty(&packed->list)) { | 
 | 		prq = list_entry_rq(packed->list.prev); | 
 | 		if (prq->queuelist.prev != &packed->list) { | 
 | 			list_del_init(&prq->queuelist); | 
 | 			spin_lock_irq(q->queue_lock); | 
 | 			blk_requeue_request(mq->queue, prq); | 
 | 			spin_unlock_irq(q->queue_lock); | 
 | 		} else { | 
 | 			list_del_init(&prq->queuelist); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mmc_blk_clear_packed(mq_rq); | 
 | } | 
 |  | 
 | static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) | 
 | { | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	struct mmc_blk_request *brq = &mq->mqrq_cur->brq; | 
 | 	int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0; | 
 | 	enum mmc_blk_status status; | 
 | 	struct mmc_queue_req *mq_rq; | 
 | 	struct request *req = rqc; | 
 | 	struct mmc_async_req *areq; | 
 | 	const u8 packed_nr = 2; | 
 | 	u8 reqs = 0; | 
 |  | 
 | 	if (!rqc && !mq->mqrq_prev->req) | 
 | 		return 0; | 
 |  | 
 | 	if (rqc) | 
 | 		reqs = mmc_blk_prep_packed_list(mq, rqc); | 
 |  | 
 | 	do { | 
 | 		if (rqc) { | 
 | 			/* | 
 | 			 * When 4KB native sector is enabled, only 8 blocks | 
 | 			 * multiple read or write is allowed | 
 | 			 */ | 
 | 			if (mmc_large_sector(card) && | 
 | 				!IS_ALIGNED(blk_rq_sectors(rqc), 8)) { | 
 | 				pr_err("%s: Transfer size is not 4KB sector size aligned\n", | 
 | 					req->rq_disk->disk_name); | 
 | 				mq_rq = mq->mqrq_cur; | 
 | 				goto cmd_abort; | 
 | 			} | 
 |  | 
 | 			if (reqs >= packed_nr) | 
 | 				mmc_blk_packed_hdr_wrq_prep(mq->mqrq_cur, | 
 | 							    card, mq); | 
 | 			else | 
 | 				mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq); | 
 | 			areq = &mq->mqrq_cur->mmc_active; | 
 | 		} else | 
 | 			areq = NULL; | 
 | 		areq = mmc_start_req(card->host, areq, (int *) &status); | 
 | 		if (!areq) { | 
 | 			if (status == MMC_BLK_NEW_REQUEST) | 
 | 				mq->flags |= MMC_QUEUE_NEW_REQUEST; | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		mq_rq = container_of(areq, struct mmc_queue_req, mmc_active); | 
 | 		brq = &mq_rq->brq; | 
 | 		req = mq_rq->req; | 
 | 		type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; | 
 | 		mmc_queue_bounce_post(mq_rq); | 
 |  | 
 | 		switch (status) { | 
 | 		case MMC_BLK_SUCCESS: | 
 | 		case MMC_BLK_PARTIAL: | 
 | 			/* | 
 | 			 * A block was successfully transferred. | 
 | 			 */ | 
 | 			mmc_blk_reset_success(md, type); | 
 |  | 
 | 			if (mmc_packed_cmd(mq_rq->cmd_type)) { | 
 | 				ret = mmc_blk_end_packed_req(mq_rq); | 
 | 				break; | 
 | 			} else { | 
 | 				ret = blk_end_request(req, 0, | 
 | 						brq->data.bytes_xfered); | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * If the blk_end_request function returns non-zero even | 
 | 			 * though all data has been transferred and no errors | 
 | 			 * were returned by the host controller, it's a bug. | 
 | 			 */ | 
 | 			if (status == MMC_BLK_SUCCESS && ret) { | 
 | 				pr_err("%s BUG rq_tot %d d_xfer %d\n", | 
 | 				       __func__, blk_rq_bytes(req), | 
 | 				       brq->data.bytes_xfered); | 
 | 				rqc = NULL; | 
 | 				goto cmd_abort; | 
 | 			} | 
 | 			break; | 
 | 		case MMC_BLK_CMD_ERR: | 
 | 			ret = mmc_blk_cmd_err(md, card, brq, req, ret); | 
 | 			if (mmc_blk_reset(md, card->host, type)) | 
 | 				goto cmd_abort; | 
 | 			if (!ret) | 
 | 				goto start_new_req; | 
 | 			break; | 
 | 		case MMC_BLK_RETRY: | 
 | 			retune_retry_done = brq->retune_retry_done; | 
 | 			if (retry++ < 5) | 
 | 				break; | 
 | 			/* Fall through */ | 
 | 		case MMC_BLK_ABORT: | 
 | 			if (!mmc_blk_reset(md, card->host, type)) | 
 | 				break; | 
 | 			goto cmd_abort; | 
 | 		case MMC_BLK_DATA_ERR: { | 
 | 			int err; | 
 |  | 
 | 			err = mmc_blk_reset(md, card->host, type); | 
 | 			if (!err) | 
 | 				break; | 
 | 			if (err == -ENODEV || | 
 | 				mmc_packed_cmd(mq_rq->cmd_type)) | 
 | 				goto cmd_abort; | 
 | 			/* Fall through */ | 
 | 		} | 
 | 		case MMC_BLK_ECC_ERR: | 
 | 			if (brq->data.blocks > 1) { | 
 | 				/* Redo read one sector at a time */ | 
 | 				pr_warn("%s: retrying using single block read\n", | 
 | 					req->rq_disk->disk_name); | 
 | 				disable_multi = 1; | 
 | 				break; | 
 | 			} | 
 | 			/* | 
 | 			 * After an error, we redo I/O one sector at a | 
 | 			 * time, so we only reach here after trying to | 
 | 			 * read a single sector. | 
 | 			 */ | 
 | 			ret = blk_end_request(req, -EIO, | 
 | 						brq->data.blksz); | 
 | 			if (!ret) | 
 | 				goto start_new_req; | 
 | 			break; | 
 | 		case MMC_BLK_NOMEDIUM: | 
 | 			goto cmd_abort; | 
 | 		default: | 
 | 			pr_err("%s: Unhandled return value (%d)", | 
 | 					req->rq_disk->disk_name, status); | 
 | 			goto cmd_abort; | 
 | 		} | 
 |  | 
 | 		if (ret) { | 
 | 			if (mmc_packed_cmd(mq_rq->cmd_type)) { | 
 | 				if (!mq_rq->packed->retries) | 
 | 					goto cmd_abort; | 
 | 				mmc_blk_packed_hdr_wrq_prep(mq_rq, card, mq); | 
 | 				mmc_start_req(card->host, | 
 | 					      &mq_rq->mmc_active, NULL); | 
 | 			} else { | 
 |  | 
 | 				/* | 
 | 				 * In case of a incomplete request | 
 | 				 * prepare it again and resend. | 
 | 				 */ | 
 | 				mmc_blk_rw_rq_prep(mq_rq, card, | 
 | 						disable_multi, mq); | 
 | 				mmc_start_req(card->host, | 
 | 						&mq_rq->mmc_active, NULL); | 
 | 			} | 
 | 			mq_rq->brq.retune_retry_done = retune_retry_done; | 
 | 		} | 
 | 	} while (ret); | 
 |  | 
 | 	return 1; | 
 |  | 
 |  cmd_abort: | 
 | 	if (mmc_packed_cmd(mq_rq->cmd_type)) { | 
 | 		mmc_blk_abort_packed_req(mq_rq); | 
 | 	} else { | 
 | 		if (mmc_card_removed(card)) | 
 | 			req->cmd_flags |= REQ_QUIET; | 
 | 		while (ret) | 
 | 			ret = blk_end_request(req, -EIO, | 
 | 					blk_rq_cur_bytes(req)); | 
 | 	} | 
 |  | 
 |  start_new_req: | 
 | 	if (rqc) { | 
 | 		if (mmc_card_removed(card)) { | 
 | 			rqc->cmd_flags |= REQ_QUIET; | 
 | 			blk_end_request_all(rqc, -EIO); | 
 | 		} else { | 
 | 			/* | 
 | 			 * If current request is packed, it needs to put back. | 
 | 			 */ | 
 | 			if (mmc_packed_cmd(mq->mqrq_cur->cmd_type)) | 
 | 				mmc_blk_revert_packed_req(mq, mq->mqrq_cur); | 
 |  | 
 | 			mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq); | 
 | 			mmc_start_req(card->host, | 
 | 				      &mq->mqrq_cur->mmc_active, NULL); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_blk_data *md = mq->data; | 
 | 	struct mmc_card *card = md->queue.card; | 
 | 	struct mmc_host *host = card->host; | 
 | 	unsigned long flags; | 
 | 	bool req_is_special = mmc_req_is_special(req); | 
 |  | 
 | 	if (req && !mq->mqrq_prev->req) | 
 | 		/* claim host only for the first request */ | 
 | 		mmc_get_card(card); | 
 |  | 
 | 	ret = mmc_blk_part_switch(card, md); | 
 | 	if (ret) { | 
 | 		if (req) { | 
 | 			blk_end_request_all(req, -EIO); | 
 | 		} | 
 | 		ret = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	mq->flags &= ~MMC_QUEUE_NEW_REQUEST; | 
 | 	if (req && req_op(req) == REQ_OP_DISCARD) { | 
 | 		/* complete ongoing async transfer before issuing discard */ | 
 | 		if (card->host->areq) | 
 | 			mmc_blk_issue_rw_rq(mq, NULL); | 
 | 		ret = mmc_blk_issue_discard_rq(mq, req); | 
 | 	} else if (req && req_op(req) == REQ_OP_SECURE_ERASE) { | 
 | 		/* complete ongoing async transfer before issuing secure erase*/ | 
 | 		if (card->host->areq) | 
 | 			mmc_blk_issue_rw_rq(mq, NULL); | 
 | 		ret = mmc_blk_issue_secdiscard_rq(mq, req); | 
 | 	} else if (req && req_op(req) == REQ_OP_FLUSH) { | 
 | 		/* complete ongoing async transfer before issuing flush */ | 
 | 		if (card->host->areq) | 
 | 			mmc_blk_issue_rw_rq(mq, NULL); | 
 | 		ret = mmc_blk_issue_flush(mq, req); | 
 | 	} else { | 
 | 		if (!req && host->areq) { | 
 | 			spin_lock_irqsave(&host->context_info.lock, flags); | 
 | 			host->context_info.is_waiting_last_req = true; | 
 | 			spin_unlock_irqrestore(&host->context_info.lock, flags); | 
 | 		} | 
 | 		ret = mmc_blk_issue_rw_rq(mq, req); | 
 | 	} | 
 |  | 
 | out: | 
 | 	if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || req_is_special) | 
 | 		/* | 
 | 		 * Release host when there are no more requests | 
 | 		 * and after special request(discard, flush) is done. | 
 | 		 * In case sepecial request, there is no reentry to | 
 | 		 * the 'mmc_blk_issue_rq' with 'mqrq_prev->req'. | 
 | 		 */ | 
 | 		mmc_put_card(card); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline int mmc_blk_readonly(struct mmc_card *card) | 
 | { | 
 | 	return mmc_card_readonly(card) || | 
 | 	       !(card->csd.cmdclass & CCC_BLOCK_WRITE); | 
 | } | 
 |  | 
 | static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, | 
 | 					      struct device *parent, | 
 | 					      sector_t size, | 
 | 					      bool default_ro, | 
 | 					      const char *subname, | 
 | 					      int area_type) | 
 | { | 
 | 	struct mmc_blk_data *md; | 
 | 	int devidx, ret; | 
 |  | 
 | again: | 
 | 	if (!ida_pre_get(&mmc_blk_ida, GFP_KERNEL)) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	spin_lock(&mmc_blk_lock); | 
 | 	ret = ida_get_new(&mmc_blk_ida, &devidx); | 
 | 	spin_unlock(&mmc_blk_lock); | 
 |  | 
 | 	if (ret == -EAGAIN) | 
 | 		goto again; | 
 | 	else if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	if (devidx >= max_devices) { | 
 | 		ret = -ENOSPC; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); | 
 | 	if (!md) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	md->area_type = area_type; | 
 |  | 
 | 	/* | 
 | 	 * Set the read-only status based on the supported commands | 
 | 	 * and the write protect switch. | 
 | 	 */ | 
 | 	md->read_only = mmc_blk_readonly(card); | 
 |  | 
 | 	md->disk = alloc_disk(perdev_minors); | 
 | 	if (md->disk == NULL) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_kfree; | 
 | 	} | 
 |  | 
 | 	spin_lock_init(&md->lock); | 
 | 	INIT_LIST_HEAD(&md->part); | 
 | 	md->usage = 1; | 
 |  | 
 | 	ret = mmc_init_queue(&md->queue, card, &md->lock, subname); | 
 | 	if (ret) | 
 | 		goto err_putdisk; | 
 |  | 
 | 	md->queue.data = md; | 
 |  | 
 | 	md->disk->major	= MMC_BLOCK_MAJOR; | 
 | 	md->disk->first_minor = devidx * perdev_minors; | 
 | 	md->disk->fops = &mmc_bdops; | 
 | 	md->disk->private_data = md; | 
 | 	md->disk->queue = md->queue.queue; | 
 | 	md->parent = parent; | 
 | 	set_disk_ro(md->disk, md->read_only || default_ro); | 
 | 	md->disk->flags = GENHD_FL_EXT_DEVT; | 
 | 	if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT)) | 
 | 		md->disk->flags |= GENHD_FL_NO_PART_SCAN; | 
 |  | 
 | 	/* | 
 | 	 * As discussed on lkml, GENHD_FL_REMOVABLE should: | 
 | 	 * | 
 | 	 * - be set for removable media with permanent block devices | 
 | 	 * - be unset for removable block devices with permanent media | 
 | 	 * | 
 | 	 * Since MMC block devices clearly fall under the second | 
 | 	 * case, we do not set GENHD_FL_REMOVABLE.  Userspace | 
 | 	 * should use the block device creation/destruction hotplug | 
 | 	 * messages to tell when the card is present. | 
 | 	 */ | 
 |  | 
 | 	snprintf(md->disk->disk_name, sizeof(md->disk->disk_name), | 
 | 		 "mmcblk%u%s", card->host->index, subname ? subname : ""); | 
 |  | 
 | 	if (mmc_card_mmc(card)) | 
 | 		blk_queue_logical_block_size(md->queue.queue, | 
 | 					     card->ext_csd.data_sector_size); | 
 | 	else | 
 | 		blk_queue_logical_block_size(md->queue.queue, 512); | 
 |  | 
 | 	set_capacity(md->disk, size); | 
 |  | 
 | 	if (mmc_host_cmd23(card->host)) { | 
 | 		if ((mmc_card_mmc(card) && | 
 | 		     card->csd.mmca_vsn >= CSD_SPEC_VER_3) || | 
 | 		    (mmc_card_sd(card) && | 
 | 		     card->scr.cmds & SD_SCR_CMD23_SUPPORT)) | 
 | 			md->flags |= MMC_BLK_CMD23; | 
 | 	} | 
 |  | 
 | 	if (mmc_card_mmc(card) && | 
 | 	    md->flags & MMC_BLK_CMD23 && | 
 | 	    ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) || | 
 | 	     card->ext_csd.rel_sectors)) { | 
 | 		md->flags |= MMC_BLK_REL_WR; | 
 | 		blk_queue_write_cache(md->queue.queue, true, true); | 
 | 	} | 
 |  | 
 | 	if (mmc_card_mmc(card) && | 
 | 	    (area_type == MMC_BLK_DATA_AREA_MAIN) && | 
 | 	    (md->flags & MMC_BLK_CMD23) && | 
 | 	    card->ext_csd.packed_event_en) { | 
 | 		if (!mmc_packed_init(&md->queue, card)) | 
 | 			md->flags |= MMC_BLK_PACKED_CMD; | 
 | 	} | 
 |  | 
 | 	return md; | 
 |  | 
 |  err_putdisk: | 
 | 	put_disk(md->disk); | 
 |  err_kfree: | 
 | 	kfree(md); | 
 |  out: | 
 | 	spin_lock(&mmc_blk_lock); | 
 | 	ida_remove(&mmc_blk_ida, devidx); | 
 | 	spin_unlock(&mmc_blk_lock); | 
 | 	return ERR_PTR(ret); | 
 | } | 
 |  | 
 | static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) | 
 | { | 
 | 	sector_t size; | 
 |  | 
 | 	if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { | 
 | 		/* | 
 | 		 * The EXT_CSD sector count is in number or 512 byte | 
 | 		 * sectors. | 
 | 		 */ | 
 | 		size = card->ext_csd.sectors; | 
 | 	} else { | 
 | 		/* | 
 | 		 * The CSD capacity field is in units of read_blkbits. | 
 | 		 * set_capacity takes units of 512 bytes. | 
 | 		 */ | 
 | 		size = (typeof(sector_t))card->csd.capacity | 
 | 			<< (card->csd.read_blkbits - 9); | 
 | 	} | 
 |  | 
 | 	return mmc_blk_alloc_req(card, &card->dev, size, false, NULL, | 
 | 					MMC_BLK_DATA_AREA_MAIN); | 
 | } | 
 |  | 
 | static int mmc_blk_alloc_part(struct mmc_card *card, | 
 | 			      struct mmc_blk_data *md, | 
 | 			      unsigned int part_type, | 
 | 			      sector_t size, | 
 | 			      bool default_ro, | 
 | 			      const char *subname, | 
 | 			      int area_type) | 
 | { | 
 | 	char cap_str[10]; | 
 | 	struct mmc_blk_data *part_md; | 
 |  | 
 | 	part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro, | 
 | 				    subname, area_type); | 
 | 	if (IS_ERR(part_md)) | 
 | 		return PTR_ERR(part_md); | 
 | 	part_md->part_type = part_type; | 
 | 	list_add(&part_md->part, &md->part); | 
 |  | 
 | 	string_get_size((u64)get_capacity(part_md->disk), 512, STRING_UNITS_2, | 
 | 			cap_str, sizeof(cap_str)); | 
 | 	pr_info("%s: %s %s partition %u %s\n", | 
 | 	       part_md->disk->disk_name, mmc_card_id(card), | 
 | 	       mmc_card_name(card), part_md->part_type, cap_str); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* MMC Physical partitions consist of two boot partitions and | 
 |  * up to four general purpose partitions. | 
 |  * For each partition enabled in EXT_CSD a block device will be allocatedi | 
 |  * to provide access to the partition. | 
 |  */ | 
 |  | 
 | static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md) | 
 | { | 
 | 	int idx, ret = 0; | 
 |  | 
 | 	if (!mmc_card_mmc(card)) | 
 | 		return 0; | 
 |  | 
 | 	for (idx = 0; idx < card->nr_parts; idx++) { | 
 | 		if (card->part[idx].size) { | 
 | 			ret = mmc_blk_alloc_part(card, md, | 
 | 				card->part[idx].part_cfg, | 
 | 				card->part[idx].size >> 9, | 
 | 				card->part[idx].force_ro, | 
 | 				card->part[idx].name, | 
 | 				card->part[idx].area_type); | 
 | 			if (ret) | 
 | 				return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void mmc_blk_remove_req(struct mmc_blk_data *md) | 
 | { | 
 | 	struct mmc_card *card; | 
 |  | 
 | 	if (md) { | 
 | 		/* | 
 | 		 * Flush remaining requests and free queues. It | 
 | 		 * is freeing the queue that stops new requests | 
 | 		 * from being accepted. | 
 | 		 */ | 
 | 		card = md->queue.card; | 
 | 		mmc_cleanup_queue(&md->queue); | 
 | 		if (md->flags & MMC_BLK_PACKED_CMD) | 
 | 			mmc_packed_clean(&md->queue); | 
 | 		if (md->disk->flags & GENHD_FL_UP) { | 
 | 			device_remove_file(disk_to_dev(md->disk), &md->force_ro); | 
 | 			if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && | 
 | 					card->ext_csd.boot_ro_lockable) | 
 | 				device_remove_file(disk_to_dev(md->disk), | 
 | 					&md->power_ro_lock); | 
 |  | 
 | 			del_gendisk(md->disk); | 
 | 		} | 
 | 		mmc_blk_put(md); | 
 | 	} | 
 | } | 
 |  | 
 | static void mmc_blk_remove_parts(struct mmc_card *card, | 
 | 				 struct mmc_blk_data *md) | 
 | { | 
 | 	struct list_head *pos, *q; | 
 | 	struct mmc_blk_data *part_md; | 
 |  | 
 | 	list_for_each_safe(pos, q, &md->part) { | 
 | 		part_md = list_entry(pos, struct mmc_blk_data, part); | 
 | 		list_del(pos); | 
 | 		mmc_blk_remove_req(part_md); | 
 | 	} | 
 | } | 
 |  | 
 | static int mmc_add_disk(struct mmc_blk_data *md) | 
 | { | 
 | 	int ret; | 
 | 	struct mmc_card *card = md->queue.card; | 
 |  | 
 | 	device_add_disk(md->parent, md->disk); | 
 | 	md->force_ro.show = force_ro_show; | 
 | 	md->force_ro.store = force_ro_store; | 
 | 	sysfs_attr_init(&md->force_ro.attr); | 
 | 	md->force_ro.attr.name = "force_ro"; | 
 | 	md->force_ro.attr.mode = S_IRUGO | S_IWUSR; | 
 | 	ret = device_create_file(disk_to_dev(md->disk), &md->force_ro); | 
 | 	if (ret) | 
 | 		goto force_ro_fail; | 
 |  | 
 | 	if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && | 
 | 	     card->ext_csd.boot_ro_lockable) { | 
 | 		umode_t mode; | 
 |  | 
 | 		if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS) | 
 | 			mode = S_IRUGO; | 
 | 		else | 
 | 			mode = S_IRUGO | S_IWUSR; | 
 |  | 
 | 		md->power_ro_lock.show = power_ro_lock_show; | 
 | 		md->power_ro_lock.store = power_ro_lock_store; | 
 | 		sysfs_attr_init(&md->power_ro_lock.attr); | 
 | 		md->power_ro_lock.attr.mode = mode; | 
 | 		md->power_ro_lock.attr.name = | 
 | 					"ro_lock_until_next_power_on"; | 
 | 		ret = device_create_file(disk_to_dev(md->disk), | 
 | 				&md->power_ro_lock); | 
 | 		if (ret) | 
 | 			goto power_ro_lock_fail; | 
 | 	} | 
 | 	return ret; | 
 |  | 
 | power_ro_lock_fail: | 
 | 	device_remove_file(disk_to_dev(md->disk), &md->force_ro); | 
 | force_ro_fail: | 
 | 	del_gendisk(md->disk); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct mmc_fixup blk_fixups[] = | 
 | { | 
 | 	MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk, | 
 | 		  MMC_QUIRK_INAND_CMD38), | 
 | 	MMC_FIXUP("SEM04G", CID_MANFID_SANDISK, 0x100, add_quirk, | 
 | 		  MMC_QUIRK_INAND_CMD38), | 
 | 	MMC_FIXUP("SEM08G", CID_MANFID_SANDISK, 0x100, add_quirk, | 
 | 		  MMC_QUIRK_INAND_CMD38), | 
 | 	MMC_FIXUP("SEM16G", CID_MANFID_SANDISK, 0x100, add_quirk, | 
 | 		  MMC_QUIRK_INAND_CMD38), | 
 | 	MMC_FIXUP("SEM32G", CID_MANFID_SANDISK, 0x100, add_quirk, | 
 | 		  MMC_QUIRK_INAND_CMD38), | 
 |  | 
 | 	/* | 
 | 	 * Some MMC cards experience performance degradation with CMD23 | 
 | 	 * instead of CMD12-bounded multiblock transfers. For now we'll | 
 | 	 * black list what's bad... | 
 | 	 * - Certain Toshiba cards. | 
 | 	 * | 
 | 	 * N.B. This doesn't affect SD cards. | 
 | 	 */ | 
 | 	MMC_FIXUP("SDMB-32", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_BLK_NO_CMD23), | 
 | 	MMC_FIXUP("SDM032", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_BLK_NO_CMD23), | 
 | 	MMC_FIXUP("MMC08G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_BLK_NO_CMD23), | 
 | 	MMC_FIXUP("MMC16G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_BLK_NO_CMD23), | 
 | 	MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_BLK_NO_CMD23), | 
 |  | 
 | 	/* | 
 | 	 * Some MMC cards need longer data read timeout than indicated in CSD. | 
 | 	 */ | 
 | 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, | 
 | 		  MMC_QUIRK_LONG_READ_TIME), | 
 | 	MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_LONG_READ_TIME), | 
 |  | 
 | 	/* | 
 | 	 * On these Samsung MoviNAND parts, performing secure erase or | 
 | 	 * secure trim can result in unrecoverable corruption due to a | 
 | 	 * firmware bug. | 
 | 	 */ | 
 | 	MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 | 	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), | 
 |  | 
 | 	/* | 
 | 	 *  On Some Kingston eMMCs, performing trim can result in | 
 | 	 *  unrecoverable data conrruption occasionally due to a firmware bug. | 
 | 	 */ | 
 | 	MMC_FIXUP("V10008", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_TRIM_BROKEN), | 
 | 	MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, | 
 | 		  MMC_QUIRK_TRIM_BROKEN), | 
 |  | 
 | 	END_FIXUP | 
 | }; | 
 |  | 
 | static int mmc_blk_probe(struct mmc_card *card) | 
 | { | 
 | 	struct mmc_blk_data *md, *part_md; | 
 | 	char cap_str[10]; | 
 |  | 
 | 	/* | 
 | 	 * Check that the card supports the command class(es) we need. | 
 | 	 */ | 
 | 	if (!(card->csd.cmdclass & CCC_BLOCK_READ)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	mmc_fixup_device(card, blk_fixups); | 
 |  | 
 | 	md = mmc_blk_alloc(card); | 
 | 	if (IS_ERR(md)) | 
 | 		return PTR_ERR(md); | 
 |  | 
 | 	string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, | 
 | 			cap_str, sizeof(cap_str)); | 
 | 	pr_info("%s: %s %s %s %s\n", | 
 | 		md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), | 
 | 		cap_str, md->read_only ? "(ro)" : ""); | 
 |  | 
 | 	if (mmc_blk_alloc_parts(card, md)) | 
 | 		goto out; | 
 |  | 
 | 	dev_set_drvdata(&card->dev, md); | 
 |  | 
 | 	if (mmc_add_disk(md)) | 
 | 		goto out; | 
 |  | 
 | 	list_for_each_entry(part_md, &md->part, part) { | 
 | 		if (mmc_add_disk(part_md)) | 
 | 			goto out; | 
 | 	} | 
 |  | 
 | 	pm_runtime_set_autosuspend_delay(&card->dev, 3000); | 
 | 	pm_runtime_use_autosuspend(&card->dev); | 
 |  | 
 | 	/* | 
 | 	 * Don't enable runtime PM for SD-combo cards here. Leave that | 
 | 	 * decision to be taken during the SDIO init sequence instead. | 
 | 	 */ | 
 | 	if (card->type != MMC_TYPE_SD_COMBO) { | 
 | 		pm_runtime_set_active(&card->dev); | 
 | 		pm_runtime_enable(&card->dev); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 |  out: | 
 | 	mmc_blk_remove_parts(card, md); | 
 | 	mmc_blk_remove_req(md); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mmc_blk_remove(struct mmc_card *card) | 
 | { | 
 | 	struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
 |  | 
 | 	mmc_blk_remove_parts(card, md); | 
 | 	pm_runtime_get_sync(&card->dev); | 
 | 	mmc_claim_host(card->host); | 
 | 	mmc_blk_part_switch(card, md); | 
 | 	mmc_release_host(card->host); | 
 | 	if (card->type != MMC_TYPE_SD_COMBO) | 
 | 		pm_runtime_disable(&card->dev); | 
 | 	pm_runtime_put_noidle(&card->dev); | 
 | 	mmc_blk_remove_req(md); | 
 | 	dev_set_drvdata(&card->dev, NULL); | 
 | } | 
 |  | 
 | static int _mmc_blk_suspend(struct mmc_card *card) | 
 | { | 
 | 	struct mmc_blk_data *part_md; | 
 | 	struct mmc_blk_data *md = dev_get_drvdata(&card->dev); | 
 |  | 
 | 	if (md) { | 
 | 		mmc_queue_suspend(&md->queue); | 
 | 		list_for_each_entry(part_md, &md->part, part) { | 
 | 			mmc_queue_suspend(&part_md->queue); | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mmc_blk_shutdown(struct mmc_card *card) | 
 | { | 
 | 	_mmc_blk_suspend(card); | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM_SLEEP | 
 | static int mmc_blk_suspend(struct device *dev) | 
 | { | 
 | 	struct mmc_card *card = mmc_dev_to_card(dev); | 
 |  | 
 | 	return _mmc_blk_suspend(card); | 
 | } | 
 |  | 
 | static int mmc_blk_resume(struct device *dev) | 
 | { | 
 | 	struct mmc_blk_data *part_md; | 
 | 	struct mmc_blk_data *md = dev_get_drvdata(dev); | 
 |  | 
 | 	if (md) { | 
 | 		/* | 
 | 		 * Resume involves the card going into idle state, | 
 | 		 * so current partition is always the main one. | 
 | 		 */ | 
 | 		md->part_curr = md->part_type; | 
 | 		mmc_queue_resume(&md->queue); | 
 | 		list_for_each_entry(part_md, &md->part, part) { | 
 | 			mmc_queue_resume(&part_md->queue); | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume); | 
 |  | 
 | static struct mmc_driver mmc_driver = { | 
 | 	.drv		= { | 
 | 		.name	= "mmcblk", | 
 | 		.pm	= &mmc_blk_pm_ops, | 
 | 	}, | 
 | 	.probe		= mmc_blk_probe, | 
 | 	.remove		= mmc_blk_remove, | 
 | 	.shutdown	= mmc_blk_shutdown, | 
 | }; | 
 |  | 
 | static int __init mmc_blk_init(void) | 
 | { | 
 | 	int res; | 
 |  | 
 | 	if (perdev_minors != CONFIG_MMC_BLOCK_MINORS) | 
 | 		pr_info("mmcblk: using %d minors per device\n", perdev_minors); | 
 |  | 
 | 	max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors); | 
 |  | 
 | 	res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
 | 	if (res) | 
 | 		goto out; | 
 |  | 
 | 	res = mmc_register_driver(&mmc_driver); | 
 | 	if (res) | 
 | 		goto out2; | 
 |  | 
 | 	return 0; | 
 |  out2: | 
 | 	unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
 |  out: | 
 | 	return res; | 
 | } | 
 |  | 
 | static void __exit mmc_blk_exit(void) | 
 | { | 
 | 	mmc_unregister_driver(&mmc_driver); | 
 | 	unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); | 
 | } | 
 |  | 
 | module_init(mmc_blk_init); | 
 | module_exit(mmc_blk_exit); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); | 
 |  |