| /* | 
 |  *	Watchdog Timer Driver | 
 |  *	   for ITE IT87xx Environment Control - Low Pin Count Input / Output | 
 |  * | 
 |  *	(c) Copyright 2007  Oliver Schuster <olivers137@aol.com> | 
 |  * | 
 |  *	Based on softdog.c	by Alan Cox, | 
 |  *		 83977f_wdt.c	by Jose Goncalves, | 
 |  *		 it87.c		by Chris Gauthron, Jean Delvare | 
 |  * | 
 |  *	Data-sheets: Publicly available at the ITE website | 
 |  *		    http://www.ite.com.tw/ | 
 |  * | 
 |  *	Support of the watchdog timers, which are available on | 
 |  *	IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, | 
 |  *	IT8728 and IT8783. | 
 |  * | 
 |  *	This program is free software; you can redistribute it and/or | 
 |  *	modify it under the terms of the GNU General Public License | 
 |  *	as published by the Free Software Foundation; either version | 
 |  *	2 of the License, or (at your option) any later version. | 
 |  * | 
 |  *	This program is distributed in the hope that it will be useful, | 
 |  *	but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  *	GNU General Public License for more details. | 
 |  * | 
 |  *	You should have received a copy of the GNU General Public License | 
 |  *	along with this program; if not, write to the Free Software | 
 |  *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/io.h> | 
 |  | 
 |  | 
 | #define WATCHDOG_VERSION	"1.14" | 
 | #define WATCHDOG_NAME		"IT87 WDT" | 
 | #define DRIVER_VERSION		WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" | 
 | #define WD_MAGIC		'V' | 
 |  | 
 | /* Defaults for Module Parameter */ | 
 | #define DEFAULT_NOGAMEPORT	0 | 
 | #define DEFAULT_NOCIR		0 | 
 | #define DEFAULT_EXCLUSIVE	1 | 
 | #define DEFAULT_TIMEOUT		60 | 
 | #define DEFAULT_TESTMODE	0 | 
 | #define DEFAULT_NOWAYOUT	WATCHDOG_NOWAYOUT | 
 |  | 
 | /* IO Ports */ | 
 | #define REG		0x2e | 
 | #define VAL		0x2f | 
 |  | 
 | /* Logical device Numbers LDN */ | 
 | #define GPIO		0x07 | 
 | #define GAMEPORT	0x09 | 
 | #define CIR		0x0a | 
 |  | 
 | /* Configuration Registers and Functions */ | 
 | #define LDNREG		0x07 | 
 | #define CHIPID		0x20 | 
 | #define CHIPREV		0x22 | 
 | #define ACTREG		0x30 | 
 | #define BASEREG		0x60 | 
 |  | 
 | /* Chip Id numbers */ | 
 | #define NO_DEV_ID	0xffff | 
 | #define IT8702_ID	0x8702 | 
 | #define IT8705_ID	0x8705 | 
 | #define IT8712_ID	0x8712 | 
 | #define IT8716_ID	0x8716 | 
 | #define IT8718_ID	0x8718 | 
 | #define IT8720_ID	0x8720 | 
 | #define IT8721_ID	0x8721 | 
 | #define IT8726_ID	0x8726	/* the data sheet suggest wrongly 0x8716 */ | 
 | #define IT8728_ID	0x8728 | 
 | #define IT8783_ID	0x8783 | 
 |  | 
 | /* GPIO Configuration Registers LDN=0x07 */ | 
 | #define WDTCTRL		0x71 | 
 | #define WDTCFG		0x72 | 
 | #define WDTVALLSB	0x73 | 
 | #define WDTVALMSB	0x74 | 
 |  | 
 | /* GPIO Bits WDTCTRL */ | 
 | #define WDT_CIRINT	0x80 | 
 | #define WDT_MOUSEINT	0x40 | 
 | #define WDT_KYBINT	0x20 | 
 | #define WDT_GAMEPORT	0x10 /* not in it8718, it8720, it8721, it8728 */ | 
 | #define WDT_FORCE	0x02 | 
 | #define WDT_ZERO	0x01 | 
 |  | 
 | /* GPIO Bits WDTCFG */ | 
 | #define WDT_TOV1	0x80 | 
 | #define WDT_KRST	0x40 | 
 | #define WDT_TOVE	0x20 | 
 | #define WDT_PWROK	0x10 /* not in it8721 */ | 
 | #define WDT_INT_MASK	0x0f | 
 |  | 
 | /* CIR Configuration Register LDN=0x0a */ | 
 | #define CIR_ILS		0x70 | 
 |  | 
 | /* The default Base address is not always available, we use this */ | 
 | #define CIR_BASE	0x0208 | 
 |  | 
 | /* CIR Controller */ | 
 | #define CIR_DR(b)	(b) | 
 | #define CIR_IER(b)	(b + 1) | 
 | #define CIR_RCR(b)	(b + 2) | 
 | #define CIR_TCR1(b)	(b + 3) | 
 | #define CIR_TCR2(b)	(b + 4) | 
 | #define CIR_TSR(b)	(b + 5) | 
 | #define CIR_RSR(b)	(b + 6) | 
 | #define CIR_BDLR(b)	(b + 5) | 
 | #define CIR_BDHR(b)	(b + 6) | 
 | #define CIR_IIR(b)	(b + 7) | 
 |  | 
 | /* Default Base address of Game port */ | 
 | #define GP_BASE_DEFAULT	0x0201 | 
 |  | 
 | /* wdt_status */ | 
 | #define WDTS_TIMER_RUN	0 | 
 | #define WDTS_DEV_OPEN	1 | 
 | #define WDTS_KEEPALIVE	2 | 
 | #define WDTS_LOCKED	3 | 
 | #define WDTS_USE_GP	4 | 
 | #define WDTS_EXPECTED	5 | 
 | #define WDTS_USE_CIR	6 | 
 |  | 
 | static	unsigned int base, gpact, ciract, max_units, chip_type; | 
 | static	unsigned long wdt_status; | 
 |  | 
 | static	int nogameport = DEFAULT_NOGAMEPORT; | 
 | static int nocir      = DEFAULT_NOCIR; | 
 | static	int exclusive  = DEFAULT_EXCLUSIVE; | 
 | static	int timeout    = DEFAULT_TIMEOUT; | 
 | static	int testmode   = DEFAULT_TESTMODE; | 
 | static	bool nowayout   = DEFAULT_NOWAYOUT; | 
 |  | 
 | module_param(nogameport, int, 0); | 
 | MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" | 
 | 		__MODULE_STRING(DEFAULT_NOGAMEPORT)); | 
 | module_param(nocir, int, 0); | 
 | MODULE_PARM_DESC(nocir, "Forbid the use of Consumer IR interrupts to reset timer, default=" | 
 | 		__MODULE_STRING(DEFAULT_NOCIR)); | 
 | module_param(exclusive, int, 0); | 
 | MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default=" | 
 | 		__MODULE_STRING(DEFAULT_EXCLUSIVE)); | 
 | module_param(timeout, int, 0); | 
 | MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" | 
 | 		__MODULE_STRING(DEFAULT_TIMEOUT)); | 
 | module_param(testmode, int, 0); | 
 | MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" | 
 | 		__MODULE_STRING(DEFAULT_TESTMODE)); | 
 | module_param(nowayout, bool, 0); | 
 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" | 
 | 		__MODULE_STRING(WATCHDOG_NOWAYOUT)); | 
 |  | 
 | /* Superio Chip */ | 
 |  | 
 | static inline int superio_enter(void) | 
 | { | 
 | 	/* | 
 | 	 * Try to reserve REG and REG + 1 for exclusive access. | 
 | 	 */ | 
 | 	if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	outb(0x87, REG); | 
 | 	outb(0x01, REG); | 
 | 	outb(0x55, REG); | 
 | 	outb(0x55, REG); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void superio_exit(void) | 
 | { | 
 | 	outb(0x02, REG); | 
 | 	outb(0x02, VAL); | 
 | 	release_region(REG, 2); | 
 | } | 
 |  | 
 | static inline void superio_select(int ldn) | 
 | { | 
 | 	outb(LDNREG, REG); | 
 | 	outb(ldn, VAL); | 
 | } | 
 |  | 
 | static inline int superio_inb(int reg) | 
 | { | 
 | 	outb(reg, REG); | 
 | 	return inb(VAL); | 
 | } | 
 |  | 
 | static inline void superio_outb(int val, int reg) | 
 | { | 
 | 	outb(reg, REG); | 
 | 	outb(val, VAL); | 
 | } | 
 |  | 
 | static inline int superio_inw(int reg) | 
 | { | 
 | 	int val; | 
 | 	outb(reg++, REG); | 
 | 	val = inb(VAL) << 8; | 
 | 	outb(reg, REG); | 
 | 	val |= inb(VAL); | 
 | 	return val; | 
 | } | 
 |  | 
 | static inline void superio_outw(int val, int reg) | 
 | { | 
 | 	outb(reg++, REG); | 
 | 	outb(val >> 8, VAL); | 
 | 	outb(reg, REG); | 
 | 	outb(val, VAL); | 
 | } | 
 |  | 
 | /* Internal function, should be called after superio_select(GPIO) */ | 
 | static void wdt_update_timeout(void) | 
 | { | 
 | 	unsigned char cfg = WDT_KRST; | 
 | 	int tm = timeout; | 
 |  | 
 | 	if (testmode) | 
 | 		cfg = 0; | 
 |  | 
 | 	if (tm <= max_units) | 
 | 		cfg |= WDT_TOV1; | 
 | 	else | 
 | 		tm /= 60; | 
 |  | 
 | 	if (chip_type != IT8721_ID) | 
 | 		cfg |= WDT_PWROK; | 
 |  | 
 | 	superio_outb(cfg, WDTCFG); | 
 | 	superio_outb(tm, WDTVALLSB); | 
 | 	if (max_units > 255) | 
 | 		superio_outb(tm>>8, WDTVALMSB); | 
 | } | 
 |  | 
 | static int wdt_round_time(int t) | 
 | { | 
 | 	t += 59; | 
 | 	t -= t % 60; | 
 | 	return t; | 
 | } | 
 |  | 
 | /* watchdog timer handling */ | 
 |  | 
 | static void wdt_keepalive(void) | 
 | { | 
 | 	if (test_bit(WDTS_USE_GP, &wdt_status)) | 
 | 		inb(base); | 
 | 	else if (test_bit(WDTS_USE_CIR, &wdt_status)) | 
 | 		/* The timer reloads with around 5 msec delay */ | 
 | 		outb(0x55, CIR_DR(base)); | 
 | 	else { | 
 | 		if (superio_enter()) | 
 | 			return; | 
 |  | 
 | 		superio_select(GPIO); | 
 | 		wdt_update_timeout(); | 
 | 		superio_exit(); | 
 | 	} | 
 | 	set_bit(WDTS_KEEPALIVE, &wdt_status); | 
 | } | 
 |  | 
 | static int wdt_start(void) | 
 | { | 
 | 	int ret = superio_enter(); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	superio_select(GPIO); | 
 | 	if (test_bit(WDTS_USE_GP, &wdt_status)) | 
 | 		superio_outb(WDT_GAMEPORT, WDTCTRL); | 
 | 	else if (test_bit(WDTS_USE_CIR, &wdt_status)) | 
 | 		superio_outb(WDT_CIRINT, WDTCTRL); | 
 | 	wdt_update_timeout(); | 
 |  | 
 | 	superio_exit(); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wdt_stop(void) | 
 | { | 
 | 	int ret = superio_enter(); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	superio_select(GPIO); | 
 | 	superio_outb(0x00, WDTCTRL); | 
 | 	superio_outb(WDT_TOV1, WDTCFG); | 
 | 	superio_outb(0x00, WDTVALLSB); | 
 | 	if (max_units > 255) | 
 | 		superio_outb(0x00, WDTVALMSB); | 
 |  | 
 | 	superio_exit(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	wdt_set_timeout - set a new timeout value with watchdog ioctl | 
 |  *	@t: timeout value in seconds | 
 |  * | 
 |  *	The hardware device has a 8 or 16 bit watchdog timer (depends on | 
 |  *	chip version) that can be configured to count seconds or minutes. | 
 |  * | 
 |  *	Used within WDIOC_SETTIMEOUT watchdog device ioctl. | 
 |  */ | 
 |  | 
 | static int wdt_set_timeout(int t) | 
 | { | 
 | 	if (t < 1 || t > max_units * 60) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (t > max_units) | 
 | 		timeout = wdt_round_time(t); | 
 | 	else | 
 | 		timeout = t; | 
 |  | 
 | 	if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | 
 | 		int ret = superio_enter(); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		superio_select(GPIO); | 
 | 		wdt_update_timeout(); | 
 | 		superio_exit(); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	wdt_get_status - determines the status supported by watchdog ioctl | 
 |  *	@status: status returned to user space | 
 |  * | 
 |  *	The status bit of the device does not allow to distinguish | 
 |  *	between a regular system reset and a watchdog forced reset. | 
 |  *	But, in test mode it is useful, so it is supported through | 
 |  *	WDIOC_GETSTATUS watchdog ioctl. Additionally the driver | 
 |  *	reports the keepalive signal and the acception of the magic. | 
 |  * | 
 |  *	Used within WDIOC_GETSTATUS watchdog device ioctl. | 
 |  */ | 
 |  | 
 | static int wdt_get_status(int *status) | 
 | { | 
 | 	*status = 0; | 
 | 	if (testmode) { | 
 | 		int ret = superio_enter(); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		superio_select(GPIO); | 
 | 		if (superio_inb(WDTCTRL) & WDT_ZERO) { | 
 | 			superio_outb(0x00, WDTCTRL); | 
 | 			clear_bit(WDTS_TIMER_RUN, &wdt_status); | 
 | 			*status |= WDIOF_CARDRESET; | 
 | 		} | 
 |  | 
 | 		superio_exit(); | 
 | 	} | 
 | 	if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) | 
 | 		*status |= WDIOF_KEEPALIVEPING; | 
 | 	if (test_bit(WDTS_EXPECTED, &wdt_status)) | 
 | 		*status |= WDIOF_MAGICCLOSE; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* /dev/watchdog handling */ | 
 |  | 
 | /** | 
 |  *	wdt_open - watchdog file_operations .open | 
 |  *	@inode: inode of the device | 
 |  *	@file: file handle to the device | 
 |  * | 
 |  *	The watchdog timer starts by opening the device. | 
 |  * | 
 |  *	Used within the file operation of the watchdog device. | 
 |  */ | 
 |  | 
 | static int wdt_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status)) | 
 | 		return -EBUSY; | 
 | 	if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { | 
 | 		int ret; | 
 | 		if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) | 
 | 			__module_get(THIS_MODULE); | 
 |  | 
 | 		ret = wdt_start(); | 
 | 		if (ret) { | 
 | 			clear_bit(WDTS_LOCKED, &wdt_status); | 
 | 			clear_bit(WDTS_TIMER_RUN, &wdt_status); | 
 | 			clear_bit(WDTS_DEV_OPEN, &wdt_status); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 | 	return nonseekable_open(inode, file); | 
 | } | 
 |  | 
 | /** | 
 |  *	wdt_release - watchdog file_operations .release | 
 |  *	@inode: inode of the device | 
 |  *	@file: file handle to the device | 
 |  * | 
 |  *	Closing the watchdog device either stops the watchdog timer | 
 |  *	or in the case, that nowayout is set or the magic character | 
 |  *	wasn't written, a critical warning about an running watchdog | 
 |  *	timer is given. | 
 |  * | 
 |  *	Used within the file operation of the watchdog device. | 
 |  */ | 
 |  | 
 | static int wdt_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | 
 | 		if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { | 
 | 			int ret = wdt_stop(); | 
 | 			if (ret) { | 
 | 				/* | 
 | 				 * Stop failed. Just keep the watchdog alive | 
 | 				 * and hope nothing bad happens. | 
 | 				 */ | 
 | 				set_bit(WDTS_EXPECTED, &wdt_status); | 
 | 				wdt_keepalive(); | 
 | 				return ret; | 
 | 			} | 
 | 			clear_bit(WDTS_TIMER_RUN, &wdt_status); | 
 | 		} else { | 
 | 			wdt_keepalive(); | 
 | 			pr_crit("unexpected close, not stopping watchdog!\n"); | 
 | 		} | 
 | 	} | 
 | 	clear_bit(WDTS_DEV_OPEN, &wdt_status); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  *	wdt_write - watchdog file_operations .write | 
 |  *	@file: file handle to the watchdog | 
 |  *	@buf: buffer to write | 
 |  *	@count: count of bytes | 
 |  *	@ppos: pointer to the position to write. No seeks allowed | 
 |  * | 
 |  *	A write to a watchdog device is defined as a keepalive signal. Any | 
 |  *	write of data will do, as we don't define content meaning. | 
 |  * | 
 |  *	Used within the file operation of the watchdog device. | 
 |  */ | 
 |  | 
 | static ssize_t wdt_write(struct file *file, const char __user *buf, | 
 | 			    size_t count, loff_t *ppos) | 
 | { | 
 | 	if (count) { | 
 | 		clear_bit(WDTS_EXPECTED, &wdt_status); | 
 | 		wdt_keepalive(); | 
 | 	} | 
 | 	if (!nowayout) { | 
 | 		size_t ofs; | 
 |  | 
 | 	/* note: just in case someone wrote the magic character long ago */ | 
 | 		for (ofs = 0; ofs != count; ofs++) { | 
 | 			char c; | 
 | 			if (get_user(c, buf + ofs)) | 
 | 				return -EFAULT; | 
 | 			if (c == WD_MAGIC) | 
 | 				set_bit(WDTS_EXPECTED, &wdt_status); | 
 | 		} | 
 | 	} | 
 | 	return count; | 
 | } | 
 |  | 
 | static const struct watchdog_info ident = { | 
 | 	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, | 
 | 	.firmware_version =	1, | 
 | 	.identity = WATCHDOG_NAME, | 
 | }; | 
 |  | 
 | /** | 
 |  *	wdt_ioctl - watchdog file_operations .unlocked_ioctl | 
 |  *	@file: file handle to the device | 
 |  *	@cmd: watchdog command | 
 |  *	@arg: argument pointer | 
 |  * | 
 |  *	The watchdog API defines a common set of functions for all watchdogs | 
 |  *	according to their available features. | 
 |  * | 
 |  *	Used within the file operation of the watchdog device. | 
 |  */ | 
 |  | 
 | static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	int rc = 0, status, new_options, new_timeout; | 
 | 	union { | 
 | 		struct watchdog_info __user *ident; | 
 | 		int __user *i; | 
 | 	} uarg; | 
 |  | 
 | 	uarg.i = (int __user *)arg; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case WDIOC_GETSUPPORT: | 
 | 		return copy_to_user(uarg.ident, | 
 | 				    &ident, sizeof(ident)) ? -EFAULT : 0; | 
 |  | 
 | 	case WDIOC_GETSTATUS: | 
 | 		rc = wdt_get_status(&status); | 
 | 		if (rc) | 
 | 			return rc; | 
 | 		return put_user(status, uarg.i); | 
 |  | 
 | 	case WDIOC_GETBOOTSTATUS: | 
 | 		return put_user(0, uarg.i); | 
 |  | 
 | 	case WDIOC_KEEPALIVE: | 
 | 		wdt_keepalive(); | 
 | 		return 0; | 
 |  | 
 | 	case WDIOC_SETOPTIONS: | 
 | 		if (get_user(new_options, uarg.i)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		switch (new_options) { | 
 | 		case WDIOS_DISABLECARD: | 
 | 			if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | 
 | 				rc = wdt_stop(); | 
 | 				if (rc) | 
 | 					return rc; | 
 | 			} | 
 | 			clear_bit(WDTS_TIMER_RUN, &wdt_status); | 
 | 			return 0; | 
 |  | 
 | 		case WDIOS_ENABLECARD: | 
 | 			if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { | 
 | 				rc = wdt_start(); | 
 | 				if (rc) { | 
 | 					clear_bit(WDTS_TIMER_RUN, &wdt_status); | 
 | 					return rc; | 
 | 				} | 
 | 			} | 
 | 			return 0; | 
 |  | 
 | 		default: | 
 | 			return -EFAULT; | 
 | 		} | 
 |  | 
 | 	case WDIOC_SETTIMEOUT: | 
 | 		if (get_user(new_timeout, uarg.i)) | 
 | 			return -EFAULT; | 
 | 		rc = wdt_set_timeout(new_timeout); | 
 | 	case WDIOC_GETTIMEOUT: | 
 | 		if (put_user(timeout, uarg.i)) | 
 | 			return -EFAULT; | 
 | 		return rc; | 
 |  | 
 | 	default: | 
 | 		return -ENOTTY; | 
 | 	} | 
 | } | 
 |  | 
 | static int wdt_notify_sys(struct notifier_block *this, unsigned long code, | 
 | 	void *unused) | 
 | { | 
 | 	if (code == SYS_DOWN || code == SYS_HALT) | 
 | 		wdt_stop(); | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | static const struct file_operations wdt_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= no_llseek, | 
 | 	.write		= wdt_write, | 
 | 	.unlocked_ioctl	= wdt_ioctl, | 
 | 	.open		= wdt_open, | 
 | 	.release	= wdt_release, | 
 | }; | 
 |  | 
 | static struct miscdevice wdt_miscdev = { | 
 | 	.minor		= WATCHDOG_MINOR, | 
 | 	.name		= "watchdog", | 
 | 	.fops		= &wdt_fops, | 
 | }; | 
 |  | 
 | static struct notifier_block wdt_notifier = { | 
 | 	.notifier_call = wdt_notify_sys, | 
 | }; | 
 |  | 
 | static int __init it87_wdt_init(void) | 
 | { | 
 | 	int rc = 0; | 
 | 	int try_gameport = !nogameport; | 
 | 	u8  chip_rev; | 
 | 	int gp_rreq_fail = 0; | 
 |  | 
 | 	wdt_status = 0; | 
 |  | 
 | 	rc = superio_enter(); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	chip_type = superio_inw(CHIPID); | 
 | 	chip_rev  = superio_inb(CHIPREV) & 0x0f; | 
 | 	superio_exit(); | 
 |  | 
 | 	switch (chip_type) { | 
 | 	case IT8702_ID: | 
 | 		max_units = 255; | 
 | 		break; | 
 | 	case IT8712_ID: | 
 | 		max_units = (chip_rev < 8) ? 255 : 65535; | 
 | 		break; | 
 | 	case IT8716_ID: | 
 | 	case IT8726_ID: | 
 | 		max_units = 65535; | 
 | 		break; | 
 | 	case IT8718_ID: | 
 | 	case IT8720_ID: | 
 | 	case IT8721_ID: | 
 | 	case IT8728_ID: | 
 | 	case IT8783_ID: | 
 | 		max_units = 65535; | 
 | 		try_gameport = 0; | 
 | 		break; | 
 | 	case IT8705_ID: | 
 | 		pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", | 
 | 		       chip_type, chip_rev); | 
 | 		return -ENODEV; | 
 | 	case NO_DEV_ID: | 
 | 		pr_err("no device\n"); | 
 | 		return -ENODEV; | 
 | 	default: | 
 | 		pr_err("Unknown Chip found, Chip %04x Revision %04x\n", | 
 | 		       chip_type, chip_rev); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	rc = superio_enter(); | 
 | 	if (rc) | 
 | 		return rc; | 
 |  | 
 | 	superio_select(GPIO); | 
 | 	superio_outb(WDT_TOV1, WDTCFG); | 
 | 	superio_outb(0x00, WDTCTRL); | 
 |  | 
 | 	/* First try to get Gameport support */ | 
 | 	if (try_gameport) { | 
 | 		superio_select(GAMEPORT); | 
 | 		base = superio_inw(BASEREG); | 
 | 		if (!base) { | 
 | 			base = GP_BASE_DEFAULT; | 
 | 			superio_outw(base, BASEREG); | 
 | 		} | 
 | 		gpact = superio_inb(ACTREG); | 
 | 		superio_outb(0x01, ACTREG); | 
 | 		if (request_region(base, 1, WATCHDOG_NAME)) | 
 | 			set_bit(WDTS_USE_GP, &wdt_status); | 
 | 		else | 
 | 			gp_rreq_fail = 1; | 
 | 	} | 
 |  | 
 | 	/* If we haven't Gameport support, try to get CIR support */ | 
 | 	if (!nocir && !test_bit(WDTS_USE_GP, &wdt_status)) { | 
 | 		if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { | 
 | 			if (gp_rreq_fail) | 
 | 				pr_err("I/O Address 0x%04x and 0x%04x already in use\n", | 
 | 				       base, CIR_BASE); | 
 | 			else | 
 | 				pr_err("I/O Address 0x%04x already in use\n", | 
 | 				       CIR_BASE); | 
 | 			rc = -EIO; | 
 | 			goto err_out; | 
 | 		} | 
 | 		base = CIR_BASE; | 
 |  | 
 | 		superio_select(CIR); | 
 | 		superio_outw(base, BASEREG); | 
 | 		superio_outb(0x00, CIR_ILS); | 
 | 		ciract = superio_inb(ACTREG); | 
 | 		superio_outb(0x01, ACTREG); | 
 | 		if (gp_rreq_fail) { | 
 | 			superio_select(GAMEPORT); | 
 | 			superio_outb(gpact, ACTREG); | 
 | 		} | 
 | 		set_bit(WDTS_USE_CIR, &wdt_status); | 
 | 	} | 
 |  | 
 | 	if (timeout < 1 || timeout > max_units * 60) { | 
 | 		timeout = DEFAULT_TIMEOUT; | 
 | 		pr_warn("Timeout value out of range, use default %d sec\n", | 
 | 			DEFAULT_TIMEOUT); | 
 | 	} | 
 |  | 
 | 	if (timeout > max_units) | 
 | 		timeout = wdt_round_time(timeout); | 
 |  | 
 | 	rc = register_reboot_notifier(&wdt_notifier); | 
 | 	if (rc) { | 
 | 		pr_err("Cannot register reboot notifier (err=%d)\n", rc); | 
 | 		goto err_out_region; | 
 | 	} | 
 |  | 
 | 	rc = misc_register(&wdt_miscdev); | 
 | 	if (rc) { | 
 | 		pr_err("Cannot register miscdev on minor=%d (err=%d)\n", | 
 | 		       wdt_miscdev.minor, rc); | 
 | 		goto err_out_reboot; | 
 | 	} | 
 |  | 
 | 	/* Initialize CIR to use it as keepalive source */ | 
 | 	if (test_bit(WDTS_USE_CIR, &wdt_status)) { | 
 | 		outb(0x00, CIR_RCR(base)); | 
 | 		outb(0xc0, CIR_TCR1(base)); | 
 | 		outb(0x5c, CIR_TCR2(base)); | 
 | 		outb(0x10, CIR_IER(base)); | 
 | 		outb(0x00, CIR_BDHR(base)); | 
 | 		outb(0x01, CIR_BDLR(base)); | 
 | 		outb(0x09, CIR_IER(base)); | 
 | 	} | 
 |  | 
 | 	pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d nocir=%d)\n", | 
 | 		chip_type, chip_rev, timeout, | 
 | 		nowayout, testmode, exclusive, nogameport, nocir); | 
 |  | 
 | 	superio_exit(); | 
 | 	return 0; | 
 |  | 
 | err_out_reboot: | 
 | 	unregister_reboot_notifier(&wdt_notifier); | 
 | err_out_region: | 
 | 	if (test_bit(WDTS_USE_GP, &wdt_status)) | 
 | 		release_region(base, 1); | 
 | 	else if (test_bit(WDTS_USE_CIR, &wdt_status)) { | 
 | 		release_region(base, 8); | 
 | 		superio_select(CIR); | 
 | 		superio_outb(ciract, ACTREG); | 
 | 	} | 
 | err_out: | 
 | 	if (try_gameport) { | 
 | 		superio_select(GAMEPORT); | 
 | 		superio_outb(gpact, ACTREG); | 
 | 	} | 
 |  | 
 | 	superio_exit(); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static void __exit it87_wdt_exit(void) | 
 | { | 
 | 	if (superio_enter() == 0) { | 
 | 		superio_select(GPIO); | 
 | 		superio_outb(0x00, WDTCTRL); | 
 | 		superio_outb(0x00, WDTCFG); | 
 | 		superio_outb(0x00, WDTVALLSB); | 
 | 		if (max_units > 255) | 
 | 			superio_outb(0x00, WDTVALMSB); | 
 | 		if (test_bit(WDTS_USE_GP, &wdt_status)) { | 
 | 			superio_select(GAMEPORT); | 
 | 			superio_outb(gpact, ACTREG); | 
 | 		} else if (test_bit(WDTS_USE_CIR, &wdt_status)) { | 
 | 			superio_select(CIR); | 
 | 			superio_outb(ciract, ACTREG); | 
 | 		} | 
 | 		superio_exit(); | 
 | 	} | 
 |  | 
 | 	misc_deregister(&wdt_miscdev); | 
 | 	unregister_reboot_notifier(&wdt_notifier); | 
 |  | 
 | 	if (test_bit(WDTS_USE_GP, &wdt_status)) | 
 | 		release_region(base, 1); | 
 | 	else if (test_bit(WDTS_USE_CIR, &wdt_status)) | 
 | 		release_region(base, 8); | 
 | } | 
 |  | 
 | module_init(it87_wdt_init); | 
 | module_exit(it87_wdt_exit); | 
 |  | 
 | MODULE_AUTHOR("Oliver Schuster"); | 
 | MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); | 
 | MODULE_LICENSE("GPL"); |