blob: 2fd1b61e8331dd68d0c1ffa1d81420b6a9e71d37 [file] [log] [blame]
config SND_SOC_INTEL_SST_TOPLEVEL
bool "Intel ASoC SST drivers"
default y
depends on X86 || COMPILE_TEST
select SND_SOC_INTEL_MACH
help
Intel ASoC SST Platform Drivers. If you have a Intel machine that
has an audio controller with a DSP and I2S or DMIC port, then
enable this option by saying Y
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Intel SST drivers.
if SND_SOC_INTEL_SST_TOPLEVEL
config SND_SST_IPC
tristate
# This option controls the IPC core for HiFi2 platforms
config SND_SST_IPC_PCI
tristate
select SND_SST_IPC
# This option controls the PCI-based IPC for HiFi2 platforms
# (Medfield, Merrifield).
config SND_SST_IPC_ACPI
tristate
select SND_SST_IPC
# This option controls the ACPI-based IPC for HiFi2 platforms
# (Baytrail, Cherrytrail)
config SND_SOC_INTEL_SST_ACPI
tristate
# This option controls ACPI-based probing on
# Haswell/Broadwell/Baytrail legacy and will be set
# when these platforms are enabled
config SND_SOC_INTEL_SST
tristate
config SND_SOC_INTEL_SST_FIRMWARE
tristate
select DW_DMAC_CORE
# This option controls firmware download on
# Haswell/Broadwell/Baytrail legacy and will be set
# when these platforms are enabled
config SND_SOC_INTEL_HASWELL
tristate "Haswell/Broadwell Platforms"
depends on SND_DMA_SGBUF
depends on DMADEVICES && ACPI
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_ACPI
select SND_SOC_INTEL_SST_FIRMWARE
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Haswell or Broadwell platform connected to
an I2S codec, then enable this option by saying Y or m. This is
typically used for Chromebooks. This is a recommended option.
config SND_SOC_INTEL_BAYTRAIL
tristate "Baytrail (legacy) Platforms"
depends on DMADEVICES && ACPI && SND_SST_ATOM_HIFI2_PLATFORM=n
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_ACPI
select SND_SOC_INTEL_SST_FIRMWARE
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Baytrail platform connected to an I2S codec,
then enable this option by saying Y or m. This was typically used
for Baytrail Chromebooks but this option is now deprecated and is
not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
config SND_SST_ATOM_HIFI2_PLATFORM
tristate
select SND_SOC_COMPRESS
config SND_SST_ATOM_HIFI2_PLATFORM_PCI
tristate "PCI HiFi2 (Merrifield) Platforms"
depends on X86 && PCI
select SND_SST_IPC_PCI
select SND_SST_ATOM_HIFI2_PLATFORM
help
If you have a Intel Merrifield/Edison platform, then
enable this option by saying Y or m. Distros will typically not
enable this option: while Merrifield/Edison can run a mainline
kernel with limited functionality it will require a firmware file
which is not in the standard firmware tree
config SND_SST_ATOM_HIFI2_PLATFORM_ACPI
tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms"
default ACPI
depends on X86 && ACPI
select SND_SST_IPC_ACPI
select SND_SST_ATOM_HIFI2_PLATFORM
select SND_SOC_ACPI_INTEL_MATCH
select IOSF_MBI
help
If you have a Intel Baytrail or Cherrytrail platform with an I2S
codec, then enable this option by saying Y or m. This is a
recommended option
config SND_SOC_INTEL_SKYLAKE
tristate "All Skylake/SST Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKL
select SND_SOC_INTEL_APL
select SND_SOC_INTEL_KBL
select SND_SOC_INTEL_GLK
select SND_SOC_INTEL_CNL
select SND_SOC_INTEL_CFL
help
This is a backwards-compatible option to select all devices
supported by the Intel SST/Skylake driver. This option is no
longer recommended and will be deprecated when the SOF
driver is introduced. Distributions should explicitly
select which platform uses this driver.
config SND_SOC_INTEL_SKL
tristate "Skylake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Skylake platform with the DSP enabled
in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_APL
tristate "Broxton/ApolloLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Broxton/ApolloLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_KBL
tristate "Kabylake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel Kabylake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_GLK
tristate "GeminiLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel GeminiLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_CNL
tristate "CannonLake/WhiskyLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel CNL/WHL platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_CFL
tristate "CoffeeLake Platforms"
depends on PCI && ACPI
select SND_SOC_INTEL_SKYLAKE_FAMILY
help
If you have a Intel CoffeeLake platform with the DSP
enabled in the BIOS then enable this option by saying Y or m.
config SND_SOC_INTEL_SKYLAKE_FAMILY
tristate
select SND_SOC_INTEL_SKYLAKE_COMMON
if SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_INTEL_SKYLAKE_SSP_CLK
tristate
config SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC
bool "HDAudio codec support"
help
If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
GeminiLake or CannonLake platform with an HDaudio codec
then enable this option by saying Y
config SND_SOC_INTEL_SKYLAKE_COMMON
tristate
select SND_HDA_EXT_CORE
select SND_HDA_DSP_LOADER
select SND_SOC_TOPOLOGY
select SND_SOC_INTEL_SST
select SND_SOC_HDAC_HDA if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC
select SND_HDA_INTEL_DSP_DETECTION_SKL if SND_SOC_INTEL_SKL
select SND_HDA_INTEL_DSP_DETECTION_APL if SND_SOC_INTEL_APL
select SND_HDA_INTEL_DSP_DETECTION_KBL if SND_SOC_INTEL_KBL
select SND_HDA_INTEL_DSP_DETECTION_GLK if SND_SOC_INTEL_GLK
select SND_HDA_INTEL_DSP_DETECTION_CNL if SND_SOC_INTEL_CNL
select SND_HDA_INTEL_DSP_DETECTION_CFL if SND_SOC_INTEL_CFL
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
GeminiLake or CannonLake platform with the DSP enabled in the BIOS
then enable this option by saying Y or m.
endif ## SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_ACPI_INTEL_MATCH
tristate
select SND_SOC_ACPI if ACPI
# this option controls the compilation of ACPI matching tables and
# helpers and is not meant to be selected by the user.
endif ## SND_SOC_INTEL_SST_TOPLEVEL
# ASoC codec drivers
source "sound/soc/intel/boards/Kconfig"