| ChangeLog: |
| * 0.0 initial release |
| * 0.1 addition of ATUSB_TEST |
| * 0.2 First public release. Compatible with atusb driver in the upcoming 4.2 kernel |
| * 0.3 * ATUSB_EUI64_READ/WRITE for permanent EUI64 handling |
| * Support to run the firmware on Atmel Raven USB dongles (Alexander Aring) |
| * Remove FCS frame check from firmware and leave it to the driver |
| * Use extended operation mode for TX for automatic ACK handling |
| |
| To flash the firmware you need dfu-util on the host. Issue |
| |
| dfu-util -d 20b7:1540 -D atusb-0.3.dfu |
| |
| right after plugging the device into the USB port while the red led is still |
| on. |
| |
| For the Atmel Raven USB dongle a full JTAG setup is needed to flash the |
| firmware as no DFU bootloader is available there. |
| |
| The firmware is flashed into permanent storage and does not need to be provided |
| after power off. A new firmware version can be flashed the same way. |
| |
| Firmware source code is GPLv2+ and can be found here: |
| http://projects.qi-hardware.com/index.php/p/ben-wpan/source/tree/master/atusb/fw |