| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Copyright (C) 2012 Regents of the University of California | 
 |  * Copyright (C) 2017 SiFive | 
 |  * | 
 |  * All RISC-V systems have a timer attached to every hart.  These timers can | 
 |  * either be read from the "time" and "timeh" CSRs, and can use the SBI to | 
 |  * setup events, or directly accessed using MMIO registers. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "riscv-timer: " fmt | 
 |  | 
 | #include <linux/acpi.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/clockchips.h> | 
 | #include <linux/cpu.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/irqdomain.h> | 
 | #include <linux/module.h> | 
 | #include <linux/sched_clock.h> | 
 | #include <linux/io-64-nonatomic-lo-hi.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/limits.h> | 
 | #include <clocksource/timer-riscv.h> | 
 | #include <asm/smp.h> | 
 | #include <asm/cpufeature.h> | 
 | #include <asm/sbi.h> | 
 | #include <asm/timex.h> | 
 |  | 
 | static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available); | 
 | static bool riscv_timer_cannot_wake_cpu; | 
 |  | 
 | static void riscv_clock_event_stop(void) | 
 | { | 
 | 	if (static_branch_likely(&riscv_sstc_available)) { | 
 | 		csr_write(CSR_STIMECMP, ULONG_MAX); | 
 | 		if (IS_ENABLED(CONFIG_32BIT)) | 
 | 			csr_write(CSR_STIMECMPH, ULONG_MAX); | 
 | 	} else { | 
 | 		sbi_set_timer(U64_MAX); | 
 | 	} | 
 | } | 
 |  | 
 | static int riscv_clock_next_event(unsigned long delta, | 
 | 		struct clock_event_device *ce) | 
 | { | 
 | 	u64 next_tval = get_cycles64() + delta; | 
 |  | 
 | 	if (static_branch_likely(&riscv_sstc_available)) { | 
 | #if defined(CONFIG_32BIT) | 
 | 		csr_write(CSR_STIMECMP, next_tval & 0xFFFFFFFF); | 
 | 		csr_write(CSR_STIMECMPH, next_tval >> 32); | 
 | #else | 
 | 		csr_write(CSR_STIMECMP, next_tval); | 
 | #endif | 
 | 	} else | 
 | 		sbi_set_timer(next_tval); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int riscv_clock_shutdown(struct clock_event_device *evt) | 
 | { | 
 | 	riscv_clock_event_stop(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned int riscv_clock_event_irq; | 
 | static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = { | 
 | 	.name			= "riscv_timer_clockevent", | 
 | 	.features		= CLOCK_EVT_FEAT_ONESHOT, | 
 | 	.rating			= 100, | 
 | 	.set_next_event		= riscv_clock_next_event, | 
 | 	.set_state_shutdown	= riscv_clock_shutdown, | 
 | }; | 
 |  | 
 | /* | 
 |  * It is guaranteed that all the timers across all the harts are synchronized | 
 |  * within one tick of each other, so while this could technically go | 
 |  * backwards when hopping between CPUs, practically it won't happen. | 
 |  */ | 
 | static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs) | 
 | { | 
 | 	return get_cycles64(); | 
 | } | 
 |  | 
 | static u64 notrace riscv_sched_clock(void) | 
 | { | 
 | 	return get_cycles64(); | 
 | } | 
 |  | 
 | static struct clocksource riscv_clocksource = { | 
 | 	.name		= "riscv_clocksource", | 
 | 	.rating		= 400, | 
 | 	.mask		= CLOCKSOURCE_MASK(64), | 
 | 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS, | 
 | 	.read		= riscv_clocksource_rdtime, | 
 | #if IS_ENABLED(CONFIG_GENERIC_GETTIMEOFDAY) | 
 | 	.vdso_clock_mode = VDSO_CLOCKMODE_ARCHTIMER, | 
 | #else | 
 | 	.vdso_clock_mode = VDSO_CLOCKMODE_NONE, | 
 | #endif | 
 | }; | 
 |  | 
 | static int riscv_timer_starting_cpu(unsigned int cpu) | 
 | { | 
 | 	struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu); | 
 |  | 
 | 	/* Clear timer interrupt */ | 
 | 	riscv_clock_event_stop(); | 
 |  | 
 | 	ce->cpumask = cpumask_of(cpu); | 
 | 	ce->irq = riscv_clock_event_irq; | 
 | 	if (riscv_timer_cannot_wake_cpu) | 
 | 		ce->features |= CLOCK_EVT_FEAT_C3STOP; | 
 | 	if (static_branch_likely(&riscv_sstc_available)) | 
 | 		ce->rating = 450; | 
 | 	clockevents_config_and_register(ce, riscv_timebase, 100, ULONG_MAX); | 
 |  | 
 | 	enable_percpu_irq(riscv_clock_event_irq, | 
 | 			  irq_get_trigger_type(riscv_clock_event_irq)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int riscv_timer_dying_cpu(unsigned int cpu) | 
 | { | 
 | 	disable_percpu_irq(riscv_clock_event_irq); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void riscv_cs_get_mult_shift(u32 *mult, u32 *shift) | 
 | { | 
 | 	*mult = riscv_clocksource.mult; | 
 | 	*shift = riscv_clocksource.shift; | 
 | } | 
 | EXPORT_SYMBOL_GPL(riscv_cs_get_mult_shift); | 
 |  | 
 | /* called directly from the low-level interrupt handler */ | 
 | static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event); | 
 |  | 
 | 	riscv_clock_event_stop(); | 
 | 	evdev->event_handler(evdev); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int __init riscv_timer_init_common(void) | 
 | { | 
 | 	int error; | 
 | 	struct irq_domain *domain; | 
 | 	struct fwnode_handle *intc_fwnode = riscv_get_intc_hwnode(); | 
 |  | 
 | 	domain = irq_find_matching_fwnode(intc_fwnode, DOMAIN_BUS_ANY); | 
 | 	if (!domain) { | 
 | 		pr_err("Failed to find irq_domain for INTC node [%pfwP]\n", | 
 | 		       intc_fwnode); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	riscv_clock_event_irq = irq_create_mapping(domain, RV_IRQ_TIMER); | 
 | 	if (!riscv_clock_event_irq) { | 
 | 		pr_err("Failed to map timer interrupt for node [%pfwP]\n", intc_fwnode); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	error = clocksource_register_hz(&riscv_clocksource, riscv_timebase); | 
 | 	if (error) { | 
 | 		pr_err("RISCV timer registration failed [%d]\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	sched_clock_register(riscv_sched_clock, 64, riscv_timebase); | 
 |  | 
 | 	error = request_percpu_irq(riscv_clock_event_irq, | 
 | 				    riscv_timer_interrupt, | 
 | 				    "riscv-timer", &riscv_clock_event); | 
 | 	if (error) { | 
 | 		pr_err("registering percpu irq failed [%d]\n", error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	if (riscv_isa_extension_available(NULL, SSTC)) { | 
 | 		pr_info("Timer interrupt in S-mode is available via sstc extension\n"); | 
 | 		static_branch_enable(&riscv_sstc_available); | 
 | 	} | 
 |  | 
 | 	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING, | 
 | 			 "clockevents/riscv/timer:starting", | 
 | 			 riscv_timer_starting_cpu, riscv_timer_dying_cpu); | 
 | 	if (error) | 
 | 		pr_err("cpu hp setup state failed for RISCV timer [%d]\n", | 
 | 		       error); | 
 |  | 
 | 	return error; | 
 | } | 
 |  | 
 | static int __init riscv_timer_init_dt(struct device_node *n) | 
 | { | 
 | 	int cpuid, error; | 
 | 	unsigned long hartid; | 
 | 	struct device_node *child; | 
 |  | 
 | 	error = riscv_of_processor_hartid(n, &hartid); | 
 | 	if (error < 0) { | 
 | 		pr_warn("Invalid hartid for node [%pOF] error = [%lu]\n", | 
 | 			n, hartid); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	cpuid = riscv_hartid_to_cpuid(hartid); | 
 | 	if (cpuid < 0) { | 
 | 		pr_warn("Invalid cpuid for hartid [%lu]\n", hartid); | 
 | 		return cpuid; | 
 | 	} | 
 |  | 
 | 	if (cpuid != smp_processor_id()) | 
 | 		return 0; | 
 |  | 
 | 	child = of_find_compatible_node(NULL, NULL, "riscv,timer"); | 
 | 	if (child) { | 
 | 		riscv_timer_cannot_wake_cpu = of_property_read_bool(child, | 
 | 					"riscv,timer-cannot-wake-cpu"); | 
 | 		of_node_put(child); | 
 | 	} | 
 |  | 
 | 	return riscv_timer_init_common(); | 
 | } | 
 |  | 
 | TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt); | 
 |  | 
 | #ifdef CONFIG_ACPI | 
 | static int __init riscv_timer_acpi_init(struct acpi_table_header *table) | 
 | { | 
 | 	struct acpi_table_rhct *rhct = (struct acpi_table_rhct *)table; | 
 |  | 
 | 	riscv_timer_cannot_wake_cpu = rhct->flags & ACPI_RHCT_TIMER_CANNOT_WAKEUP_CPU; | 
 |  | 
 | 	return riscv_timer_init_common(); | 
 | } | 
 |  | 
 | TIMER_ACPI_DECLARE(aclint_mtimer, ACPI_SIG_RHCT, riscv_timer_acpi_init); | 
 |  | 
 | #endif |