Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SDM845 ADSP Peripheral Image Loader

maintainers:
  - Bjorn Andersson <bjorn.andersson@linaro.org>

description:
  This document defines the binding for a component that loads and boots firmware
  on the Qualcomm Technology Inc. ADSP.

properties:
  compatible:
    enum:
      - qcom,sdm845-adsp-pil

  reg:
    maxItems: 1
    description:
      The base address and size of the qdsp6ss register

  interrupts:
    items:
      - description: Watchdog interrupt
      - description: Fatal interrupt
      - description: Ready interrupt
      - description: Handover interrupt
      - description: Stop acknowledge interrupt

  interrupt-names:
    items:
      - const: wdog
      - const: fatal
      - const: ready
      - const: handover
      - const: stop-ack

  clocks:
    items:
      - description: XO clock
      - description: SWAY clock
      - description: LPASS AHBS AON clock
      - description: LPASS AHBM AON clock
      - description: QDSP XO clock
      - description: Q6SP6SS SLEEP clock
      - description: Q6SP6SS CORE clock

  clock-names:
    items:
      - const: xo
      - const: sway_cbcr
      - const: lpass_ahbs_aon_cbcr
      - const: lpass_ahbm_aon_cbcr
      - const: qdsp6ss_xo
      - const: qdsp6ss_sleep
      - const: qdsp6ss_core

  power-domains:
    items:
      - description: CX power domain

  resets:
    items:
      - description: PDC AUDIO SYNC RESET
      - description: CC LPASS restart

  reset-names:
    items:
      - const: pdc_sync
      - const: cc_lpass

  memory-region:
    maxItems: 1
    description: Reference to the reserved-memory for the Hexagon core

  qcom,halt-regs:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description:
      Phandle reference to a syscon representing TCSR followed by the
      three offsets within syscon for q6, modem and nc halt registers.

  qcom,smem-states:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: States used by the AP to signal the Hexagon core
    items:
      - description: Stop the modem

  qcom,smem-state-names:
    description: The names of the state bits used for SMP2P output
    items:
      - const: stop

required:
  - compatible
  - reg
  - interrupts
  - interrupt-names
  - clocks
  - clock-names
  - power-domains
  - resets
  - reset-names
  - qcom,halt-regs
  - memory-region
  - qcom,smem-states
  - qcom,smem-state-names

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/qcom,rpmh.h>
    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
    #include <dt-bindings/power/qcom-rpmpd.h>
    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
    remoteproc@17300000 {
        compatible = "qcom,sdm845-adsp-pil";
        reg = <0x17300000 0x40c>;

        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
        interrupt-names = "wdog", "fatal", "ready",
                "handover", "stop-ack";

        clocks = <&rpmhcc RPMH_CXO_CLK>,
                 <&gcc GCC_LPASS_SWAY_CLK>,
                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
        clock-names = "xo", "sway_cbcr",
                "lpass_ahbs_aon_cbcr",
                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
                "qdsp6ss_sleep", "qdsp6ss_core";

        power-domains = <&rpmhpd SDM845_CX>;

        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
        reset-names = "pdc_sync", "cc_lpass";

        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;

        memory-region = <&pil_adsp_mem>;

        qcom,smem-states = <&adsp_smp2p_out 0>;
        qcom,smem-state-names = "stop";
    };