blob: bd9d812b1afa77ee02cd0324875157fe858e6a8a [file] [log] [blame]
/*
* Copyright © 2015-2016 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Robert Bragg <robert@sixbynine.org>
*/
/**
* DOC: i915 Perf Overview
*
* Gen graphics supports a large number of performance counters that can help
* driver and application developers understand and optimize their use of the
* GPU.
*
* This i915 perf interface enables userspace to configure and open a file
* descriptor representing a stream of GPU metrics which can then be read() as
* a stream of sample records.
*
* The interface is particularly suited to exposing buffered metrics that are
* captured by DMA from the GPU, unsynchronized with and unrelated to the CPU.
*
* Streams representing a single context are accessible to applications with a
* corresponding drm file descriptor, such that OpenGL can use the interface
* without special privileges. Access to system-wide metrics requires root
* privileges by default, unless changed via the dev.i915.perf_event_paranoid
* sysctl option.
*
*/
/**
* DOC: i915 Perf History and Comparison with Core Perf
*
* The interface was initially inspired by the core Perf infrastructure but
* some notable differences are:
*
* i915 perf file descriptors represent a "stream" instead of an "event"; where
* a perf event primarily corresponds to a single 64bit value, while a stream
* might sample sets of tightly-coupled counters, depending on the
* configuration. For example the Gen OA unit isn't designed to support
* orthogonal configurations of individual counters; it's configured for a set
* of related counters. Samples for an i915 perf stream capturing OA metrics
* will include a set of counter values packed in a compact HW specific format.
* The OA unit supports a number of different packing formats which can be
* selected by the user opening the stream. Perf has support for grouping
* events, but each event in the group is configured, validated and
* authenticated individually with separate system calls.
*
* i915 perf stream configurations are provided as an array of u64 (key,value)
* pairs, instead of a fixed struct with multiple miscellaneous config members,
* interleaved with event-type specific members.
*
* i915 perf doesn't support exposing metrics via an mmap'd circular buffer.
* The supported metrics are being written to memory by the GPU unsynchronized
* with the CPU, using HW specific packing formats for counter sets. Sometimes
* the constraints on HW configuration require reports to be filtered before it
* would be acceptable to expose them to unprivileged applications - to hide
* the metrics of other processes/contexts. For these use cases a read() based
* interface is a good fit, and provides an opportunity to filter data as it
* gets copied from the GPU mapped buffers to userspace buffers.
*
*
* Issues hit with first prototype based on Core Perf
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* The first prototype of this driver was based on the core perf
* infrastructure, and while we did make that mostly work, with some changes to
* perf, we found we were breaking or working around too many assumptions baked
* into perf's currently cpu centric design.
*
* In the end we didn't see a clear benefit to making perf's implementation and
* interface more complex by changing design assumptions while we knew we still
* wouldn't be able to use any existing perf based userspace tools.
*
* Also considering the Gen specific nature of the Observability hardware and
* how userspace will sometimes need to combine i915 perf OA metrics with
* side-band OA data captured via MI_REPORT_PERF_COUNT commands; we're
* expecting the interface to be used by a platform specific userspace such as
* OpenGL or tools. This is to say; we aren't inherently missing out on having
* a standard vendor/architecture agnostic interface by not using perf.
*
*
* For posterity, in case we might re-visit trying to adapt core perf to be
* better suited to exposing i915 metrics these were the main pain points we
* hit:
*
* - The perf based OA PMU driver broke some significant design assumptions:
*
* Existing perf pmus are used for profiling work on a cpu and we were
* introducing the idea of _IS_DEVICE pmus with different security
* implications, the need to fake cpu-related data (such as user/kernel
* registers) to fit with perf's current design, and adding _DEVICE records
* as a way to forward device-specific status records.
*
* The OA unit writes reports of counters into a circular buffer, without
* involvement from the CPU, making our PMU driver the first of a kind.
*
* Given the way we were periodically forward data from the GPU-mapped, OA
* buffer to perf's buffer, those bursts of sample writes looked to perf like
* we were sampling too fast and so we had to subvert its throttling checks.
*
* Perf supports groups of counters and allows those to be read via
* transactions internally but transactions currently seem designed to be
* explicitly initiated from the cpu (say in response to a userspace read())
* and while we could pull a report out of the OA buffer we can't
* trigger a report from the cpu on demand.
*
* Related to being report based; the OA counters are configured in HW as a
* set while perf generally expects counter configurations to be orthogonal.
* Although counters can be associated with a group leader as they are
* opened, there's no clear precedent for being able to provide group-wide
* configuration attributes (for example we want to let userspace choose the
* OA unit report format used to capture all counters in a set, or specify a
* GPU context to filter metrics on). We avoided using perf's grouping
* feature and forwarded OA reports to userspace via perf's 'raw' sample
* field. This suited our userspace well considering how coupled the counters
* are when dealing with normalizing. It would be inconvenient to split
* counters up into separate events, only to require userspace to recombine
* them. For Mesa it's also convenient to be forwarded raw, periodic reports
* for combining with the side-band raw reports it captures using
* MI_REPORT_PERF_COUNT commands.
*
* - As a side note on perf's grouping feature; there was also some concern
* that using PERF_FORMAT_GROUP as a way to pack together counter values
* would quite drastically inflate our sample sizes, which would likely
* lower the effective sampling resolutions we could use when the available
* memory bandwidth is limited.
*
* With the OA unit's report formats, counters are packed together as 32
* or 40bit values, with the largest report size being 256 bytes.
*
* PERF_FORMAT_GROUP values are 64bit, but there doesn't appear to be a
* documented ordering to the values, implying PERF_FORMAT_ID must also be
* used to add a 64bit ID before each value; giving 16 bytes per counter.
*
* Related to counter orthogonality; we can't time share the OA unit, while
* event scheduling is a central design idea within perf for allowing
* userspace to open + enable more events than can be configured in HW at any
* one time. The OA unit is not designed to allow re-configuration while in
* use. We can't reconfigure the OA unit without losing internal OA unit
* state which we can't access explicitly to save and restore. Reconfiguring
* the OA unit is also relatively slow, involving ~100 register writes. From
* userspace Mesa also depends on a stable OA configuration when emitting
* MI_REPORT_PERF_COUNT commands and importantly the OA unit can't be
* disabled while there are outstanding MI_RPC commands lest we hang the
* command streamer.
*
* The contents of sample records aren't extensible by device drivers (i.e.
* the sample_type bits). As an example; Sourab Gupta had been looking to
* attach GPU timestamps to our OA samples. We were shoehorning OA reports
* into sample records by using the 'raw' field, but it's tricky to pack more
* than one thing into this field because events/core.c currently only lets a
* pmu give a single raw data pointer plus len which will be copied into the
* ring buffer. To include more than the OA report we'd have to copy the
* report into an intermediate larger buffer. I'd been considering allowing a
* vector of data+len values to be specified for copying the raw data, but
* it felt like a kludge to being using the raw field for this purpose.
*
* - It felt like our perf based PMU was making some technical compromises
* just for the sake of using perf:
*
* perf_event_open() requires events to either relate to a pid or a specific
* cpu core, while our device pmu related to neither. Events opened with a
* pid will be automatically enabled/disabled according to the scheduling of
* that process - so not appropriate for us. When an event is related to a
* cpu id, perf ensures pmu methods will be invoked via an inter process
* interrupt on that core. To avoid invasive changes our userspace opened OA
* perf events for a specific cpu. This was workable but it meant the
* majority of the OA driver ran in atomic context, including all OA report
* forwarding, which wasn't really necessary in our case and seems to make
* our locking requirements somewhat complex as we handled the interaction
* with the rest of the i915 driver.
*/
#include <linux/anon_inodes.h>
#include <linux/nospec.h>
#include <linux/sizes.h>
#include <linux/uuid.h>
#include "gem/i915_gem_context.h"
#include "gem/i915_gem_internal.h"
#include "gt/intel_engine_pm.h"
#include "gt/intel_engine_regs.h"
#include "gt/intel_engine_user.h"
#include "gt/intel_execlists_submission.h"
#include "gt/intel_gpu_commands.h"
#include "gt/intel_gt.h"
#include "gt/intel_gt_clock_utils.h"
#include "gt/intel_gt_mcr.h"
#include "gt/intel_gt_print.h"
#include "gt/intel_gt_regs.h"
#include "gt/intel_lrc.h"
#include "gt/intel_lrc_reg.h"
#include "gt/intel_rc6.h"
#include "gt/intel_ring.h"
#include "gt/uc/intel_guc_slpc.h"
#include "i915_drv.h"
#include "i915_file_private.h"
#include "i915_perf.h"
#include "i915_perf_oa_regs.h"
#include "i915_reg.h"
/* HW requires this to be a power of two, between 128k and 16M, though driver
* is currently generally designed assuming the largest 16M size is used such
* that the overflow cases are unlikely in normal operation.
*/
#define OA_BUFFER_SIZE SZ_16M
#define OA_TAKEN(tail, head) ((tail - head) & (OA_BUFFER_SIZE - 1))
/**
* DOC: OA Tail Pointer Race
*
* There's a HW race condition between OA unit tail pointer register updates and
* writes to memory whereby the tail pointer can sometimes get ahead of what's
* been written out to the OA buffer so far (in terms of what's visible to the
* CPU).
*
* Although this can be observed explicitly while copying reports to userspace
* by checking for a zeroed report-id field in tail reports, we want to account
* for this earlier, as part of the oa_buffer_check_unlocked to avoid lots of
* redundant read() attempts.
*
* We workaround this issue in oa_buffer_check_unlocked() by reading the reports
* in the OA buffer, starting from the tail reported by the HW until we find a
* report with its first 2 dwords not 0 meaning its previous report is
* completely in memory and ready to be read. Those dwords are also set to 0
* once read and the whole buffer is cleared upon OA buffer initialization. The
* first dword is the reason for this report while the second is the timestamp,
* making the chances of having those 2 fields at 0 fairly unlikely. A more
* detailed explanation is available in oa_buffer_check_unlocked().
*
* Most of the implementation details for this workaround are in
* oa_buffer_check_unlocked() and _append_oa_reports()
*
* Note for posterity: previously the driver used to define an effective tail
* pointer that lagged the real pointer by a 'tail margin' measured in bytes
* derived from %OA_TAIL_MARGIN_NSEC and the configured sampling frequency.
* This was flawed considering that the OA unit may also automatically generate
* non-periodic reports (such as on context switch) or the OA unit may be
* enabled without any periodic sampling.
*/
#define OA_TAIL_MARGIN_NSEC 100000ULL
#define INVALID_TAIL_PTR 0xffffffff
/* The default frequency for checking whether the OA unit has written new
* reports to the circular OA buffer...
*/
#define DEFAULT_POLL_FREQUENCY_HZ 200
#define DEFAULT_POLL_PERIOD_NS (NSEC_PER_SEC / DEFAULT_POLL_FREQUENCY_HZ)
/* for sysctl proc_dointvec_minmax of dev.i915.perf_stream_paranoid */
static u32 i915_perf_stream_paranoid = true;
/* The maximum exponent the hardware accepts is 63 (essentially it selects one
* of the 64bit timestamp bits to trigger reports from) but there's currently
* no known use case for sampling as infrequently as once per 47 thousand years.
*
* Since the timestamps included in OA reports are only 32bits it seems
* reasonable to limit the OA exponent where it's still possible to account for
* overflow in OA report timestamps.
*/
#define OA_EXPONENT_MAX 31
#define INVALID_CTX_ID 0xffffffff
/* On Gen8+ automatically triggered OA reports include a 'reason' field... */
#define OAREPORT_REASON_MASK 0x3f
#define OAREPORT_REASON_MASK_EXTENDED 0x7f
#define OAREPORT_REASON_SHIFT 19
#define OAREPORT_REASON_TIMER (1<<0)
#define OAREPORT_REASON_CTX_SWITCH (1<<3)
#define OAREPORT_REASON_CLK_RATIO (1<<5)
#define HAS_MI_SET_PREDICATE(i915) (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50))
/* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate
*
* The highest sampling frequency we can theoretically program the OA unit
* with is always half the timestamp frequency: E.g. 6.25Mhz for Haswell.
*
* Initialized just before we register the sysctl parameter.
*/
static int oa_sample_rate_hard_limit;
/* Theoretically we can program the OA unit to sample every 160ns but don't
* allow that by default unless root...
*
* The default threshold of 100000Hz is based on perf's similar
* kernel.perf_event_max_sample_rate sysctl parameter.
*/
static u32 i915_oa_max_sample_rate = 100000;
/* XXX: beware if future OA HW adds new report formats that the current
* code assumes all reports have a power-of-two size and ~(size - 1) can
* be used as a mask to align the OA tail pointer.
*/
static const struct i915_oa_format oa_formats[I915_OA_FORMAT_MAX] = {
[I915_OA_FORMAT_A13] = { 0, 64 },
[I915_OA_FORMAT_A29] = { 1, 128 },
[I915_OA_FORMAT_A13_B8_C8] = { 2, 128 },
/* A29_B8_C8 Disallowed as 192 bytes doesn't factor into buffer size */
[I915_OA_FORMAT_B4_C8] = { 4, 64 },
[I915_OA_FORMAT_A45_B8_C8] = { 5, 256 },
[I915_OA_FORMAT_B4_C8_A16] = { 6, 128 },
[I915_OA_FORMAT_C4_B8] = { 7, 64 },
[I915_OA_FORMAT_A12] = { 0, 64 },
[I915_OA_FORMAT_A12_B8_C8] = { 2, 128 },
[I915_OA_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 },
[I915_OAR_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 },
[I915_OA_FORMAT_A24u40_A14u32_B8_C8] = { 5, 256 },
[I915_OAM_FORMAT_MPEC8u64_B8_C8] = { 1, 192, TYPE_OAM, HDR_64_BIT },
[I915_OAM_FORMAT_MPEC8u32_B8_C8] = { 2, 128, TYPE_OAM, HDR_64_BIT },
};
static const u32 mtl_oa_base[] = {
[PERF_GROUP_OAM_SAMEDIA_0] = 0x393000,
};
#define SAMPLE_OA_REPORT (1<<0)
/**
* struct perf_open_properties - for validated properties given to open a stream
* @sample_flags: `DRM_I915_PERF_PROP_SAMPLE_*` properties are tracked as flags
* @single_context: Whether a single or all gpu contexts should be monitored
* @hold_preemption: Whether the preemption is disabled for the filtered
* context
* @ctx_handle: A gem ctx handle for use with @single_context
* @metrics_set: An ID for an OA unit metric set advertised via sysfs
* @oa_format: An OA unit HW report format
* @oa_periodic: Whether to enable periodic OA unit sampling
* @oa_period_exponent: The OA unit sampling period is derived from this
* @engine: The engine (typically rcs0) being monitored by the OA unit
* @has_sseu: Whether @sseu was specified by userspace
* @sseu: internal SSEU configuration computed either from the userspace
* specified configuration in the opening parameters or a default value
* (see get_default_sseu_config())
* @poll_oa_period: The period in nanoseconds at which the CPU will check for OA
* data availability
*
* As read_properties_unlocked() enumerates and validates the properties given
* to open a stream of metrics the configuration is built up in the structure
* which starts out zero initialized.
*/
struct perf_open_properties {
u32 sample_flags;
u64 single_context:1;
u64 hold_preemption:1;
u64 ctx_handle;
/* OA sampling state */
int metrics_set;
int oa_format;
bool oa_periodic;
int oa_period_exponent;
struct intel_engine_cs *engine;
bool has_sseu;
struct intel_sseu sseu;
u64 poll_oa_period;
};
struct i915_oa_config_bo {
struct llist_node node;
struct i915_oa_config *oa_config;
struct i915_vma *vma;
};
static struct ctl_table_header *sysctl_header;
static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer);
void i915_oa_config_release(struct kref *ref)
{
struct i915_oa_config *oa_config =
container_of(ref, typeof(*oa_config), ref);
kfree(oa_config->flex_regs);
kfree(oa_config->b_counter_regs);
kfree(oa_config->mux_regs);
kfree_rcu(oa_config, rcu);
}
struct i915_oa_config *
i915_perf_get_oa_config(struct i915_perf *perf, int metrics_set)
{
struct i915_oa_config *oa_config;
rcu_read_lock();
oa_config = idr_find(&perf->metrics_idr, metrics_set);
if (oa_config)
oa_config = i915_oa_config_get(oa_config);
rcu_read_unlock();
return oa_config;
}
static void free_oa_config_bo(struct i915_oa_config_bo *oa_bo)
{
i915_oa_config_put(oa_bo->oa_config);
i915_vma_put(oa_bo->vma);
kfree(oa_bo);
}
static inline const
struct i915_perf_regs *__oa_regs(struct i915_perf_stream *stream)
{
return &stream->engine->oa_group->regs;
}
static u32 gen12_oa_hw_tail_read(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
return intel_uncore_read(uncore, __oa_regs(stream)->oa_tail_ptr) &
GEN12_OAG_OATAILPTR_MASK;
}
static u32 gen8_oa_hw_tail_read(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
return intel_uncore_read(uncore, GEN8_OATAILPTR) & GEN8_OATAILPTR_MASK;
}
static u32 gen7_oa_hw_tail_read(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
u32 oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);
return oastatus1 & GEN7_OASTATUS1_TAIL_MASK;
}
#define oa_report_header_64bit(__s) \
((__s)->oa_buffer.format->header == HDR_64_BIT)
static u64 oa_report_id(struct i915_perf_stream *stream, void *report)
{
return oa_report_header_64bit(stream) ? *(u64 *)report : *(u32 *)report;
}
static u64 oa_report_reason(struct i915_perf_stream *stream, void *report)
{
return (oa_report_id(stream, report) >> OAREPORT_REASON_SHIFT) &
(GRAPHICS_VER(stream->perf->i915) == 12 ?
OAREPORT_REASON_MASK_EXTENDED :
OAREPORT_REASON_MASK);
}
static void oa_report_id_clear(struct i915_perf_stream *stream, u32 *report)
{
if (oa_report_header_64bit(stream))
*(u64 *)report = 0;
else
*report = 0;
}
static bool oa_report_ctx_invalid(struct i915_perf_stream *stream, void *report)
{
return !(oa_report_id(stream, report) &
stream->perf->gen8_valid_ctx_bit);
}
static u64 oa_timestamp(struct i915_perf_stream *stream, void *report)
{
return oa_report_header_64bit(stream) ?
*((u64 *)report + 1) :
*((u32 *)report + 1);
}
static void oa_timestamp_clear(struct i915_perf_stream *stream, u32 *report)
{
if (oa_report_header_64bit(stream))
*(u64 *)&report[2] = 0;
else
report[1] = 0;
}
static u32 oa_context_id(struct i915_perf_stream *stream, u32 *report)
{
u32 ctx_id = oa_report_header_64bit(stream) ? report[4] : report[2];
return ctx_id & stream->specific_ctx_id_mask;
}
static void oa_context_id_squash(struct i915_perf_stream *stream, u32 *report)
{
if (oa_report_header_64bit(stream))
report[4] = INVALID_CTX_ID;
else
report[2] = INVALID_CTX_ID;
}
/**
* oa_buffer_check_unlocked - check for data and update tail ptr state
* @stream: i915 stream instance
*
* This is either called via fops (for blocking reads in user ctx) or the poll
* check hrtimer (atomic ctx) to check the OA buffer tail pointer and check
* if there is data available for userspace to read.
*
* This function is central to providing a workaround for the OA unit tail
* pointer having a race with respect to what data is visible to the CPU.
* It is responsible for reading tail pointers from the hardware and giving
* the pointers time to 'age' before they are made available for reading.
* (See description of OA_TAIL_MARGIN_NSEC above for further details.)
*
* Besides returning true when there is data available to read() this function
* also updates the tail in the oa_buffer object.
*
* Note: It's safe to read OA config state here unlocked, assuming that this is
* only called while the stream is enabled, while the global OA configuration
* can't be modified.
*
* Returns: %true if the OA buffer contains data, else %false
*/
static bool oa_buffer_check_unlocked(struct i915_perf_stream *stream)
{
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
int report_size = stream->oa_buffer.format->size;
u32 tail, hw_tail;
unsigned long flags;
bool pollin;
u32 partial_report_size;
/* We have to consider the (unlikely) possibility that read() errors
* could result in an OA buffer reset which might reset the head and
* tail state.
*/
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
hw_tail = stream->perf->ops.oa_hw_tail_read(stream);
hw_tail -= gtt_offset;
/* The tail pointer increases in 64 byte increments, not in report_size
* steps. Also the report size may not be a power of 2. Compute
* potentially partially landed report in the OA buffer
*/
partial_report_size = OA_TAKEN(hw_tail, stream->oa_buffer.tail);
partial_report_size %= report_size;
/* Subtract partial amount off the tail */
hw_tail = OA_TAKEN(hw_tail, partial_report_size);
tail = hw_tail;
/* Walk the stream backward until we find a report with report
* id and timestmap not at 0. Since the circular buffer pointers
* progress by increments of 64 bytes and that reports can be up
* to 256 bytes long, we can't tell whether a report has fully
* landed in memory before the report id and timestamp of the
* following report have effectively landed.
*
* This is assuming that the writes of the OA unit land in
* memory in the order they were written to.
* If not : (╯°□°)╯︵ ┻━┻
*/
while (OA_TAKEN(tail, stream->oa_buffer.tail) >= report_size) {
void *report = stream->oa_buffer.vaddr + tail;
if (oa_report_id(stream, report) ||
oa_timestamp(stream, report))
break;
tail = (tail - report_size) & (OA_BUFFER_SIZE - 1);
}
if (OA_TAKEN(hw_tail, tail) > report_size &&
__ratelimit(&stream->perf->tail_pointer_race))
drm_notice(&stream->uncore->i915->drm,
"unlanded report(s) head=0x%x tail=0x%x hw_tail=0x%x\n",
stream->oa_buffer.head, tail, hw_tail);
stream->oa_buffer.tail = tail;
pollin = OA_TAKEN(stream->oa_buffer.tail,
stream->oa_buffer.head) >= report_size;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
return pollin;
}
/**
* append_oa_status - Appends a status record to a userspace read() buffer.
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
* @type: The kind of status to report to userspace
*
* Writes a status record (such as `DRM_I915_PERF_RECORD_OA_REPORT_LOST`)
* into the userspace read() buffer.
*
* The @buf @offset will only be updated on success.
*
* Returns: 0 on success, negative error code on failure.
*/
static int append_oa_status(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset,
enum drm_i915_perf_record_type type)
{
struct drm_i915_perf_record_header header = { type, 0, sizeof(header) };
if ((count - *offset) < header.size)
return -ENOSPC;
if (copy_to_user(buf + *offset, &header, sizeof(header)))
return -EFAULT;
(*offset) += header.size;
return 0;
}
/**
* append_oa_sample - Copies single OA report into userspace read() buffer.
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
* @report: A single OA report to (optionally) include as part of the sample
*
* The contents of a sample are configured through `DRM_I915_PERF_PROP_SAMPLE_*`
* properties when opening a stream, tracked as `stream->sample_flags`. This
* function copies the requested components of a single sample to the given
* read() @buf.
*
* The @buf @offset will only be updated on success.
*
* Returns: 0 on success, negative error code on failure.
*/
static int append_oa_sample(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset,
const u8 *report)
{
int report_size = stream->oa_buffer.format->size;
struct drm_i915_perf_record_header header;
int report_size_partial;
u8 *oa_buf_end;
header.type = DRM_I915_PERF_RECORD_SAMPLE;
header.pad = 0;
header.size = stream->sample_size;
if ((count - *offset) < header.size)
return -ENOSPC;
buf += *offset;
if (copy_to_user(buf, &header, sizeof(header)))
return -EFAULT;
buf += sizeof(header);
oa_buf_end = stream->oa_buffer.vaddr + OA_BUFFER_SIZE;
report_size_partial = oa_buf_end - report;
if (report_size_partial < report_size) {
if (copy_to_user(buf, report, report_size_partial))
return -EFAULT;
buf += report_size_partial;
if (copy_to_user(buf, stream->oa_buffer.vaddr,
report_size - report_size_partial))
return -EFAULT;
} else if (copy_to_user(buf, report, report_size)) {
return -EFAULT;
}
(*offset) += header.size;
return 0;
}
/**
* gen8_append_oa_reports - Copies all buffered OA reports into
* userspace read() buffer.
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
*
* Notably any error condition resulting in a short read (-%ENOSPC or
* -%EFAULT) will be returned even though one or more records may
* have been successfully copied. In this case it's up to the caller
* to decide if the error should be squashed before returning to
* userspace.
*
* Note: reports are consumed from the head, and appended to the
* tail, so the tail chases the head?... If you think that's mad
* and back-to-front you're not alone, but this follows the
* Gen PRM naming convention.
*
* Returns: 0 on success, negative error code on failure.
*/
static int gen8_append_oa_reports(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset)
{
struct intel_uncore *uncore = stream->uncore;
int report_size = stream->oa_buffer.format->size;
u8 *oa_buf_base = stream->oa_buffer.vaddr;
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
u32 mask = (OA_BUFFER_SIZE - 1);
size_t start_offset = *offset;
unsigned long flags;
u32 head, tail;
int ret = 0;
if (drm_WARN_ON(&uncore->i915->drm, !stream->enabled))
return -EIO;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
head = stream->oa_buffer.head;
tail = stream->oa_buffer.tail;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
/*
* An out of bounds or misaligned head or tail pointer implies a driver
* bug since we validate + align the tail pointers we read from the
* hardware and we are in full control of the head pointer which should
* only be incremented by multiples of the report size.
*/
if (drm_WARN_ONCE(&uncore->i915->drm,
head > OA_BUFFER_SIZE ||
tail > OA_BUFFER_SIZE,
"Inconsistent OA buffer pointers: head = %u, tail = %u\n",
head, tail))
return -EIO;
for (/* none */;
OA_TAKEN(tail, head);
head = (head + report_size) & mask) {
u8 *report = oa_buf_base + head;
u32 *report32 = (void *)report;
u32 ctx_id;
u64 reason;
/*
* The reason field includes flags identifying what
* triggered this specific report (mostly timer
* triggered or e.g. due to a context switch).
*/
reason = oa_report_reason(stream, report);
ctx_id = oa_context_id(stream, report32);
/*
* Squash whatever is in the CTX_ID field if it's marked as
* invalid to be sure we avoid false-positive, single-context
* filtering below...
*
* Note: that we don't clear the valid_ctx_bit so userspace can
* understand that the ID has been squashed by the kernel.
*
* Update:
*
* On XEHP platforms the behavior of context id valid bit has
* changed compared to prior platforms. To describe this, we
* define a few terms:
*
* context-switch-report: This is a report with the reason type
* being context-switch. It is generated when a context switches
* out.
*
* context-valid-bit: A bit that is set in the report ID field
* to indicate that a valid context has been loaded.
*
* gpu-idle: A condition characterized by a
* context-switch-report with context-valid-bit set to 0.
*
* On prior platforms, context-id-valid bit is set to 0 only
* when GPU goes idle. In all other reports, it is set to 1.
*
* On XEHP platforms, context-valid-bit is set to 1 in a context
* switch report if a new context switched in. For all other
* reports it is set to 0.
*
* This change in behavior causes an issue with MMIO triggered
* reports. MMIO triggered reports have the markers in the
* context ID field and the context-valid-bit is 0. The logic
* below to squash the context ID would render the report
* useless since the user will not be able to find it in the OA
* buffer. Since MMIO triggered reports exist only on XEHP,
* we should avoid squashing these for XEHP platforms.
*/
if (oa_report_ctx_invalid(stream, report) &&
GRAPHICS_VER_FULL(stream->engine->i915) < IP_VER(12, 50)) {
ctx_id = INVALID_CTX_ID;
oa_context_id_squash(stream, report32);
}
/*
* NB: For Gen 8 the OA unit no longer supports clock gating
* off for a specific context and the kernel can't securely
* stop the counters from updating as system-wide / global
* values.
*
* Automatic reports now include a context ID so reports can be
* filtered on the cpu but it's not worth trying to
* automatically subtract/hide counter progress for other
* contexts while filtering since we can't stop userspace
* issuing MI_REPORT_PERF_COUNT commands which would still
* provide a side-band view of the real values.
*
* To allow userspace (such as Mesa/GL_INTEL_performance_query)
* to normalize counters for a single filtered context then it
* needs be forwarded bookend context-switch reports so that it
* can track switches in between MI_REPORT_PERF_COUNT commands
* and can itself subtract/ignore the progress of counters
* associated with other contexts. Note that the hardware
* automatically triggers reports when switching to a new
* context which are tagged with the ID of the newly active
* context. To avoid the complexity (and likely fragility) of
* reading ahead while parsing reports to try and minimize
* forwarding redundant context switch reports (i.e. between
* other, unrelated contexts) we simply elect to forward them
* all.
*
* We don't rely solely on the reason field to identify context
* switches since it's not-uncommon for periodic samples to
* identify a switch before any 'context switch' report.
*/
if (!stream->ctx ||
stream->specific_ctx_id == ctx_id ||
stream->oa_buffer.last_ctx_id == stream->specific_ctx_id ||
reason & OAREPORT_REASON_CTX_SWITCH) {
/*
* While filtering for a single context we avoid
* leaking the IDs of other contexts.
*/
if (stream->ctx &&
stream->specific_ctx_id != ctx_id) {
oa_context_id_squash(stream, report32);
}
ret = append_oa_sample(stream, buf, count, offset,
report);
if (ret)
break;
stream->oa_buffer.last_ctx_id = ctx_id;
}
if (is_power_of_2(report_size)) {
/*
* Clear out the report id and timestamp as a means
* to detect unlanded reports.
*/
oa_report_id_clear(stream, report32);
oa_timestamp_clear(stream, report32);
} else {
u8 *oa_buf_end = stream->oa_buffer.vaddr +
OA_BUFFER_SIZE;
u32 part = oa_buf_end - (u8 *)report32;
/* Zero out the entire report */
if (report_size <= part) {
memset(report32, 0, report_size);
} else {
memset(report32, 0, part);
memset(oa_buf_base, 0, report_size - part);
}
}
}
if (start_offset != *offset) {
i915_reg_t oaheadptr;
oaheadptr = GRAPHICS_VER(stream->perf->i915) == 12 ?
__oa_regs(stream)->oa_head_ptr :
GEN8_OAHEADPTR;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
/*
* We removed the gtt_offset for the copy loop above, indexing
* relative to oa_buf_base so put back here...
*/
intel_uncore_write(uncore, oaheadptr,
(head + gtt_offset) & GEN12_OAG_OAHEADPTR_MASK);
stream->oa_buffer.head = head;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
}
return ret;
}
/**
* gen8_oa_read - copy status records then buffered OA reports
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
*
* Checks OA unit status registers and if necessary appends corresponding
* status records for userspace (such as for a buffer full condition) and then
* initiate appending any buffered OA reports.
*
* Updates @offset according to the number of bytes successfully copied into
* the userspace buffer.
*
* NB: some data may be successfully copied to the userspace buffer
* even if an error is returned, and this is reflected in the
* updated @offset.
*
* Returns: zero on success or a negative error code
*/
static int gen8_oa_read(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset)
{
struct intel_uncore *uncore = stream->uncore;
u32 oastatus;
i915_reg_t oastatus_reg;
int ret;
if (drm_WARN_ON(&uncore->i915->drm, !stream->oa_buffer.vaddr))
return -EIO;
oastatus_reg = GRAPHICS_VER(stream->perf->i915) == 12 ?
__oa_regs(stream)->oa_status :
GEN8_OASTATUS;
oastatus = intel_uncore_read(uncore, oastatus_reg);
/*
* We treat OABUFFER_OVERFLOW as a significant error:
*
* Although theoretically we could handle this more gracefully
* sometimes, some Gens don't correctly suppress certain
* automatically triggered reports in this condition and so we
* have to assume that old reports are now being trampled
* over.
*
* Considering how we don't currently give userspace control
* over the OA buffer size and always configure a large 16MB
* buffer, then a buffer overflow does anyway likely indicate
* that something has gone quite badly wrong.
*/
if (oastatus & GEN8_OASTATUS_OABUFFER_OVERFLOW) {
ret = append_oa_status(stream, buf, count, offset,
DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
if (ret)
return ret;
drm_dbg(&stream->perf->i915->drm,
"OA buffer overflow (exponent = %d): force restart\n",
stream->period_exponent);
stream->perf->ops.oa_disable(stream);
stream->perf->ops.oa_enable(stream);
/*
* Note: .oa_enable() is expected to re-init the oabuffer and
* reset GEN8_OASTATUS for us
*/
oastatus = intel_uncore_read(uncore, oastatus_reg);
}
if (oastatus & GEN8_OASTATUS_REPORT_LOST) {
ret = append_oa_status(stream, buf, count, offset,
DRM_I915_PERF_RECORD_OA_REPORT_LOST);
if (ret)
return ret;
intel_uncore_rmw(uncore, oastatus_reg,
GEN8_OASTATUS_COUNTER_OVERFLOW |
GEN8_OASTATUS_REPORT_LOST,
IS_GRAPHICS_VER(uncore->i915, 8, 11) ?
(GEN8_OASTATUS_HEAD_POINTER_WRAP |
GEN8_OASTATUS_TAIL_POINTER_WRAP) : 0);
}
return gen8_append_oa_reports(stream, buf, count, offset);
}
/**
* gen7_append_oa_reports - Copies all buffered OA reports into
* userspace read() buffer.
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
*
* Notably any error condition resulting in a short read (-%ENOSPC or
* -%EFAULT) will be returned even though one or more records may
* have been successfully copied. In this case it's up to the caller
* to decide if the error should be squashed before returning to
* userspace.
*
* Note: reports are consumed from the head, and appended to the
* tail, so the tail chases the head?... If you think that's mad
* and back-to-front you're not alone, but this follows the
* Gen PRM naming convention.
*
* Returns: 0 on success, negative error code on failure.
*/
static int gen7_append_oa_reports(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset)
{
struct intel_uncore *uncore = stream->uncore;
int report_size = stream->oa_buffer.format->size;
u8 *oa_buf_base = stream->oa_buffer.vaddr;
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
u32 mask = (OA_BUFFER_SIZE - 1);
size_t start_offset = *offset;
unsigned long flags;
u32 head, tail;
int ret = 0;
if (drm_WARN_ON(&uncore->i915->drm, !stream->enabled))
return -EIO;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
head = stream->oa_buffer.head;
tail = stream->oa_buffer.tail;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
/* An out of bounds or misaligned head or tail pointer implies a driver
* bug since we validate + align the tail pointers we read from the
* hardware and we are in full control of the head pointer which should
* only be incremented by multiples of the report size (notably also
* all a power of two).
*/
if (drm_WARN_ONCE(&uncore->i915->drm,
head > OA_BUFFER_SIZE || head % report_size ||
tail > OA_BUFFER_SIZE || tail % report_size,
"Inconsistent OA buffer pointers: head = %u, tail = %u\n",
head, tail))
return -EIO;
for (/* none */;
OA_TAKEN(tail, head);
head = (head + report_size) & mask) {
u8 *report = oa_buf_base + head;
u32 *report32 = (void *)report;
/* All the report sizes factor neatly into the buffer
* size so we never expect to see a report split
* between the beginning and end of the buffer.
*
* Given the initial alignment check a misalignment
* here would imply a driver bug that would result
* in an overrun.
*/
if (drm_WARN_ON(&uncore->i915->drm,
(OA_BUFFER_SIZE - head) < report_size)) {
drm_err(&uncore->i915->drm,
"Spurious OA head ptr: non-integral report offset\n");
break;
}
/* The report-ID field for periodic samples includes
* some undocumented flags related to what triggered
* the report and is never expected to be zero so we
* can check that the report isn't invalid before
* copying it to userspace...
*/
if (report32[0] == 0) {
if (__ratelimit(&stream->perf->spurious_report_rs))
drm_notice(&uncore->i915->drm,
"Skipping spurious, invalid OA report\n");
continue;
}
ret = append_oa_sample(stream, buf, count, offset, report);
if (ret)
break;
/* Clear out the first 2 dwords as a mean to detect unlanded
* reports.
*/
report32[0] = 0;
report32[1] = 0;
}
if (start_offset != *offset) {
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
intel_uncore_write(uncore, GEN7_OASTATUS2,
((head + gtt_offset) & GEN7_OASTATUS2_HEAD_MASK) |
GEN7_OASTATUS2_MEM_SELECT_GGTT);
stream->oa_buffer.head = head;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
}
return ret;
}
/**
* gen7_oa_read - copy status records then buffered OA reports
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
*
* Checks Gen 7 specific OA unit status registers and if necessary appends
* corresponding status records for userspace (such as for a buffer full
* condition) and then initiate appending any buffered OA reports.
*
* Updates @offset according to the number of bytes successfully copied into
* the userspace buffer.
*
* Returns: zero on success or a negative error code
*/
static int gen7_oa_read(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset)
{
struct intel_uncore *uncore = stream->uncore;
u32 oastatus1;
int ret;
if (drm_WARN_ON(&uncore->i915->drm, !stream->oa_buffer.vaddr))
return -EIO;
oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);
/* XXX: On Haswell we don't have a safe way to clear oastatus1
* bits while the OA unit is enabled (while the tail pointer
* may be updated asynchronously) so we ignore status bits
* that have already been reported to userspace.
*/
oastatus1 &= ~stream->perf->gen7_latched_oastatus1;
/* We treat OABUFFER_OVERFLOW as a significant error:
*
* - The status can be interpreted to mean that the buffer is
* currently full (with a higher precedence than OA_TAKEN()
* which will start to report a near-empty buffer after an
* overflow) but it's awkward that we can't clear the status
* on Haswell, so without a reset we won't be able to catch
* the state again.
*
* - Since it also implies the HW has started overwriting old
* reports it may also affect our sanity checks for invalid
* reports when copying to userspace that assume new reports
* are being written to cleared memory.
*
* - In the future we may want to introduce a flight recorder
* mode where the driver will automatically maintain a safe
* guard band between head/tail, avoiding this overflow
* condition, but we avoid the added driver complexity for
* now.
*/
if (unlikely(oastatus1 & GEN7_OASTATUS1_OABUFFER_OVERFLOW)) {
ret = append_oa_status(stream, buf, count, offset,
DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
if (ret)
return ret;
drm_dbg(&stream->perf->i915->drm,
"OA buffer overflow (exponent = %d): force restart\n",
stream->period_exponent);
stream->perf->ops.oa_disable(stream);
stream->perf->ops.oa_enable(stream);
oastatus1 = intel_uncore_read(uncore, GEN7_OASTATUS1);
}
if (unlikely(oastatus1 & GEN7_OASTATUS1_REPORT_LOST)) {
ret = append_oa_status(stream, buf, count, offset,
DRM_I915_PERF_RECORD_OA_REPORT_LOST);
if (ret)
return ret;
stream->perf->gen7_latched_oastatus1 |=
GEN7_OASTATUS1_REPORT_LOST;
}
return gen7_append_oa_reports(stream, buf, count, offset);
}
/**
* i915_oa_wait_unlocked - handles blocking IO until OA data available
* @stream: An i915-perf stream opened for OA metrics
*
* Called when userspace tries to read() from a blocking stream FD opened
* for OA metrics. It waits until the hrtimer callback finds a non-empty
* OA buffer and wakes us.
*
* Note: it's acceptable to have this return with some false positives
* since any subsequent read handling will return -EAGAIN if there isn't
* really data ready for userspace yet.
*
* Returns: zero on success or a negative error code
*/
static int i915_oa_wait_unlocked(struct i915_perf_stream *stream)
{
/* We would wait indefinitely if periodic sampling is not enabled */
if (!stream->periodic)
return -EIO;
return wait_event_interruptible(stream->poll_wq,
oa_buffer_check_unlocked(stream));
}
/**
* i915_oa_poll_wait - call poll_wait() for an OA stream poll()
* @stream: An i915-perf stream opened for OA metrics
* @file: An i915 perf stream file
* @wait: poll() state table
*
* For handling userspace polling on an i915 perf stream opened for OA metrics,
* this starts a poll_wait with the wait queue that our hrtimer callback wakes
* when it sees data ready to read in the circular OA buffer.
*/
static void i915_oa_poll_wait(struct i915_perf_stream *stream,
struct file *file,
poll_table *wait)
{
poll_wait(file, &stream->poll_wq, wait);
}
/**
* i915_oa_read - just calls through to &i915_oa_ops->read
* @stream: An i915-perf stream opened for OA metrics
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @offset: (inout): the current position for writing into @buf
*
* Updates @offset according to the number of bytes successfully copied into
* the userspace buffer.
*
* Returns: zero on success or a negative error code
*/
static int i915_oa_read(struct i915_perf_stream *stream,
char __user *buf,
size_t count,
size_t *offset)
{
return stream->perf->ops.read(stream, buf, count, offset);
}
static struct intel_context *oa_pin_context(struct i915_perf_stream *stream)
{
struct i915_gem_engines_iter it;
struct i915_gem_context *ctx = stream->ctx;
struct intel_context *ce;
struct i915_gem_ww_ctx ww;
int err = -ENODEV;
for_each_gem_engine(ce, i915_gem_context_lock_engines(ctx), it) {
if (ce->engine != stream->engine) /* first match! */
continue;
err = 0;
break;
}
i915_gem_context_unlock_engines(ctx);
if (err)
return ERR_PTR(err);
i915_gem_ww_ctx_init(&ww, true);
retry:
/*
* As the ID is the gtt offset of the context's vma we
* pin the vma to ensure the ID remains fixed.
*/
err = intel_context_pin_ww(ce, &ww);
if (err == -EDEADLK) {
err = i915_gem_ww_ctx_backoff(&ww);
if (!err)
goto retry;
}
i915_gem_ww_ctx_fini(&ww);
if (err)
return ERR_PTR(err);
stream->pinned_ctx = ce;
return stream->pinned_ctx;
}
static int
__store_reg_to_mem(struct i915_request *rq, i915_reg_t reg, u32 ggtt_offset)
{
u32 *cs, cmd;
cmd = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT;
if (GRAPHICS_VER(rq->i915) >= 8)
cmd++;
cs = intel_ring_begin(rq, 4);
if (IS_ERR(cs))
return PTR_ERR(cs);
*cs++ = cmd;
*cs++ = i915_mmio_reg_offset(reg);
*cs++ = ggtt_offset;
*cs++ = 0;
intel_ring_advance(rq, cs);
return 0;
}
static int
__read_reg(struct intel_context *ce, i915_reg_t reg, u32 ggtt_offset)
{
struct i915_request *rq;
int err;
rq = i915_request_create(ce);
if (IS_ERR(rq))
return PTR_ERR(rq);
i915_request_get(rq);
err = __store_reg_to_mem(rq, reg, ggtt_offset);
i915_request_add(rq);
if (!err && i915_request_wait(rq, 0, HZ / 2) < 0)
err = -ETIME;
i915_request_put(rq);
return err;
}
static int
gen12_guc_sw_ctx_id(struct intel_context *ce, u32 *ctx_id)
{
struct i915_vma *scratch;
u32 *val;
int err;
scratch = __vm_create_scratch_for_read_pinned(&ce->engine->gt->ggtt->vm, 4);
if (IS_ERR(scratch))
return PTR_ERR(scratch);
err = i915_vma_sync(scratch);
if (err)
goto err_scratch;
err = __read_reg(ce, RING_EXECLIST_STATUS_HI(ce->engine->mmio_base),
i915_ggtt_offset(scratch));
if (err)
goto err_scratch;
val = i915_gem_object_pin_map_unlocked(scratch->obj, I915_MAP_WB);
if (IS_ERR(val)) {
err = PTR_ERR(val);
goto err_scratch;
}
*ctx_id = *val;
i915_gem_object_unpin_map(scratch->obj);
err_scratch:
i915_vma_unpin_and_release(&scratch, 0);
return err;
}
/*
* For execlist mode of submission, pick an unused context id
* 0 - (NUM_CONTEXT_TAG -1) are used by other contexts
* XXX_MAX_CONTEXT_HW_ID is used by idle context
*
* For GuC mode of submission read context id from the upper dword of the
* EXECLIST_STATUS register. Note that we read this value only once and expect
* that the value stays fixed for the entire OA use case. There are cases where
* GuC KMD implementation may deregister a context to reuse it's context id, but
* we prevent that from happening to the OA context by pinning it.
*/
static int gen12_get_render_context_id(struct i915_perf_stream *stream)
{
u32 ctx_id, mask;
int ret;
if (intel_engine_uses_guc(stream->engine)) {
ret = gen12_guc_sw_ctx_id(stream->pinned_ctx, &ctx_id);
if (ret)
return ret;
mask = ((1U << GEN12_GUC_SW_CTX_ID_WIDTH) - 1) <<
(GEN12_GUC_SW_CTX_ID_SHIFT - 32);
} else if (GRAPHICS_VER_FULL(stream->engine->i915) >= IP_VER(12, 50)) {
ctx_id = (XEHP_MAX_CONTEXT_HW_ID - 1) <<
(XEHP_SW_CTX_ID_SHIFT - 32);
mask = ((1U << XEHP_SW_CTX_ID_WIDTH) - 1) <<
(XEHP_SW_CTX_ID_SHIFT - 32);
} else {
ctx_id = (GEN12_MAX_CONTEXT_HW_ID - 1) <<
(GEN11_SW_CTX_ID_SHIFT - 32);
mask = ((1U << GEN11_SW_CTX_ID_WIDTH) - 1) <<
(GEN11_SW_CTX_ID_SHIFT - 32);
}
stream->specific_ctx_id = ctx_id & mask;
stream->specific_ctx_id_mask = mask;
return 0;
}
static bool oa_find_reg_in_lri(u32 *state, u32 reg, u32 *offset, u32 end)
{
u32 idx = *offset;
u32 len = min(MI_LRI_LEN(state[idx]) + idx, end);
bool found = false;
idx++;
for (; idx < len; idx += 2) {
if (state[idx] == reg) {
found = true;
break;
}
}
*offset = idx;
return found;
}
static u32 oa_context_image_offset(struct intel_context *ce, u32 reg)
{
u32 offset, len = (ce->engine->context_size - PAGE_SIZE) / 4;
u32 *state = ce->lrc_reg_state;
if (drm_WARN_ON(&ce->engine->i915->drm, !state))
return U32_MAX;
for (offset = 0; offset < len; ) {
if (IS_MI_LRI_CMD(state[offset])) {
/*
* We expect reg-value pairs in MI_LRI command, so
* MI_LRI_LEN() should be even, if not, issue a warning.
*/
drm_WARN_ON(&ce->engine->i915->drm,
MI_LRI_LEN(state[offset]) & 0x1);
if (oa_find_reg_in_lri(state, reg, &offset, len))
break;
} else {
offset++;
}
}
return offset < len ? offset : U32_MAX;
}
static int set_oa_ctx_ctrl_offset(struct intel_context *ce)
{
i915_reg_t reg = GEN12_OACTXCONTROL(ce->engine->mmio_base);
struct i915_perf *perf = &ce->engine->i915->perf;
u32 offset = perf->ctx_oactxctrl_offset;
/* Do this only once. Failure is stored as offset of U32_MAX */
if (offset)
goto exit;
offset = oa_context_image_offset(ce, i915_mmio_reg_offset(reg));
perf->ctx_oactxctrl_offset = offset;
drm_dbg(&ce->engine->i915->drm,
"%s oa ctx control at 0x%08x dword offset\n",
ce->engine->name, offset);
exit:
return offset && offset != U32_MAX ? 0 : -ENODEV;
}
static bool engine_supports_mi_query(struct intel_engine_cs *engine)
{
return engine->class == RENDER_CLASS;
}
/**
* oa_get_render_ctx_id - determine and hold ctx hw id
* @stream: An i915-perf stream opened for OA metrics
*
* Determine the render context hw id, and ensure it remains fixed for the
* lifetime of the stream. This ensures that we don't have to worry about
* updating the context ID in OACONTROL on the fly.
*
* Returns: zero on success or a negative error code
*/
static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
{
struct intel_context *ce;
int ret = 0;
ce = oa_pin_context(stream);
if (IS_ERR(ce))
return PTR_ERR(ce);
if (engine_supports_mi_query(stream->engine) &&
HAS_LOGICAL_RING_CONTEXTS(stream->perf->i915)) {
/*
* We are enabling perf query here. If we don't find the context
* offset here, just return an error.
*/
ret = set_oa_ctx_ctrl_offset(ce);
if (ret) {
intel_context_unpin(ce);
drm_err(&stream->perf->i915->drm,
"Enabling perf query failed for %s\n",
stream->engine->name);
return ret;
}
}
switch (GRAPHICS_VER(ce->engine->i915)) {
case 7: {
/*
* On Haswell we don't do any post processing of the reports
* and don't need to use the mask.
*/
stream->specific_ctx_id = i915_ggtt_offset(ce->state);
stream->specific_ctx_id_mask = 0;
break;
}
case 8:
case 9:
if (intel_engine_uses_guc(ce->engine)) {
/*
* When using GuC, the context descriptor we write in
* i915 is read by GuC and rewritten before it's
* actually written into the hardware. The LRCA is
* what is put into the context id field of the
* context descriptor by GuC. Because it's aligned to
* a page, the lower 12bits are always at 0 and
* dropped by GuC. They won't be part of the context
* ID in the OA reports, so squash those lower bits.
*/
stream->specific_ctx_id = ce->lrc.lrca >> 12;
/*
* GuC uses the top bit to signal proxy submission, so
* ignore that bit.
*/
stream->specific_ctx_id_mask =
(1U << (GEN8_CTX_ID_WIDTH - 1)) - 1;
} else {
stream->specific_ctx_id_mask =
(1U << GEN8_CTX_ID_WIDTH) - 1;
stream->specific_ctx_id = stream->specific_ctx_id_mask;
}
break;
case 11:
case 12:
ret = gen12_get_render_context_id(stream);
break;
default:
MISSING_CASE(GRAPHICS_VER(ce->engine->i915));
}
ce->tag = stream->specific_ctx_id;
drm_dbg(&stream->perf->i915->drm,
"filtering on ctx_id=0x%x ctx_id_mask=0x%x\n",
stream->specific_ctx_id,
stream->specific_ctx_id_mask);
return ret;
}
/**
* oa_put_render_ctx_id - counterpart to oa_get_render_ctx_id releases hold
* @stream: An i915-perf stream opened for OA metrics
*
* In case anything needed doing to ensure the context HW ID would remain valid
* for the lifetime of the stream, then that can be undone here.
*/
static void oa_put_render_ctx_id(struct i915_perf_stream *stream)
{
struct intel_context *ce;
ce = fetch_and_zero(&stream->pinned_ctx);
if (ce) {
ce->tag = 0; /* recomputed on next submission after parking */
intel_context_unpin(ce);
}
stream->specific_ctx_id = INVALID_CTX_ID;
stream->specific_ctx_id_mask = 0;
}
static void
free_oa_buffer(struct i915_perf_stream *stream)
{
i915_vma_unpin_and_release(&stream->oa_buffer.vma,
I915_VMA_RELEASE_MAP);
stream->oa_buffer.vaddr = NULL;
}
static void
free_oa_configs(struct i915_perf_stream *stream)
{
struct i915_oa_config_bo *oa_bo, *tmp;
i915_oa_config_put(stream->oa_config);
llist_for_each_entry_safe(oa_bo, tmp, stream->oa_config_bos.first, node)
free_oa_config_bo(oa_bo);
}
static void
free_noa_wait(struct i915_perf_stream *stream)
{
i915_vma_unpin_and_release(&stream->noa_wait, 0);
}
static bool engine_supports_oa(const struct intel_engine_cs *engine)
{
return engine->oa_group;
}
static bool engine_supports_oa_format(struct intel_engine_cs *engine, int type)
{
return engine->oa_group && engine->oa_group->type == type;
}
static void i915_oa_stream_destroy(struct i915_perf_stream *stream)
{
struct i915_perf *perf = stream->perf;
struct intel_gt *gt = stream->engine->gt;
struct i915_perf_group *g = stream->engine->oa_group;
if (WARN_ON(stream != g->exclusive_stream))
return;
/*
* Unset exclusive_stream first, it will be checked while disabling
* the metric set on gen8+.
*
* See i915_oa_init_reg_state() and lrc_configure_all_contexts()
*/
WRITE_ONCE(g->exclusive_stream, NULL);
perf->ops.disable_metric_set(stream);
free_oa_buffer(stream);
intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
intel_engine_pm_put(stream->engine);
if (stream->ctx)
oa_put_render_ctx_id(stream);
free_oa_configs(stream);
free_noa_wait(stream);
if (perf->spurious_report_rs.missed) {
gt_notice(gt, "%d spurious OA report notices suppressed due to ratelimiting\n",
perf->spurious_report_rs.missed);
}
}
static void gen7_init_oa_buffer(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
unsigned long flags;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
/* Pre-DevBDW: OABUFFER must be set with counters off,
* before OASTATUS1, but after OASTATUS2
*/
intel_uncore_write(uncore, GEN7_OASTATUS2, /* head */
gtt_offset | GEN7_OASTATUS2_MEM_SELECT_GGTT);
stream->oa_buffer.head = 0;
intel_uncore_write(uncore, GEN7_OABUFFER, gtt_offset);
intel_uncore_write(uncore, GEN7_OASTATUS1, /* tail */
gtt_offset | OABUFFER_SIZE_16M);
/* Mark that we need updated tail pointers to read from... */
stream->oa_buffer.tail = 0;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
/* On Haswell we have to track which OASTATUS1 flags we've
* already seen since they can't be cleared while periodic
* sampling is enabled.
*/
stream->perf->gen7_latched_oastatus1 = 0;
/* NB: although the OA buffer will initially be allocated
* zeroed via shmfs (and so this memset is redundant when
* first allocating), we may re-init the OA buffer, either
* when re-enabling a stream or in error/reset paths.
*
* The reason we clear the buffer for each re-init is for the
* sanity check in gen7_append_oa_reports() that looks at the
* report-id field to make sure it's non-zero which relies on
* the assumption that new reports are being written to zeroed
* memory...
*/
memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
}
static void gen8_init_oa_buffer(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
unsigned long flags;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
intel_uncore_write(uncore, GEN8_OASTATUS, 0);
intel_uncore_write(uncore, GEN8_OAHEADPTR, gtt_offset);
stream->oa_buffer.head = 0;
intel_uncore_write(uncore, GEN8_OABUFFER_UDW, 0);
/*
* PRM says:
*
* "This MMIO must be set before the OATAILPTR
* register and after the OAHEADPTR register. This is
* to enable proper functionality of the overflow
* bit."
*/
intel_uncore_write(uncore, GEN8_OABUFFER, gtt_offset |
OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT);
intel_uncore_write(uncore, GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK);
/* Mark that we need updated tail pointers to read from... */
stream->oa_buffer.tail = 0;
/*
* Reset state used to recognise context switches, affecting which
* reports we will forward to userspace while filtering for a single
* context.
*/
stream->oa_buffer.last_ctx_id = INVALID_CTX_ID;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
/*
* NB: although the OA buffer will initially be allocated
* zeroed via shmfs (and so this memset is redundant when
* first allocating), we may re-init the OA buffer, either
* when re-enabling a stream or in error/reset paths.
*
* The reason we clear the buffer for each re-init is for the
* sanity check in gen8_append_oa_reports() that looks at the
* reason field to make sure it's non-zero which relies on
* the assumption that new reports are being written to zeroed
* memory...
*/
memset(stream->oa_buffer.vaddr, 0, OA_BUFFER_SIZE);
}
static void gen12_init_oa_buffer(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
u32 gtt_offset = i915_ggtt_offset(stream->oa_buffer.vma);
unsigned long flags;
spin_lock_irqsave(&stream->oa_buffer.ptr_lock, flags);
intel_uncore_write(uncore, __oa_regs(stream)->oa_status, 0);
intel_uncore_write(uncore, __oa_regs(stream)->oa_head_ptr,
gtt_offset & GEN12_OAG_OAHEADPTR_MASK);
stream->oa_buffer.head = 0;
/*
* PRM says:
*
* "This MMIO must be set before the OATAILPTR
* register and after the OAHEADPTR register. This is
* to enable proper functionality of the overflow
* bit."
*/
intel_uncore_write(uncore, __oa_regs(stream)->oa_buffer, gtt_offset |
OABUFFER_SIZE_16M | GEN8_OABUFFER_MEM_SELECT_GGTT);
intel_uncore_write(uncore, __oa_regs(stream)->oa_tail_ptr,
gtt_offset & GEN12_OAG_OATAILPTR_MASK);
/* Mark that we need updated tail pointers to read from... */
stream->oa_buffer.tail = 0;
/*
* Reset state used to recognise context switches, affecting which
* reports we will forward to userspace while filtering for a single
* context.
*/
stream->oa_buffer.last_ctx_id = INVALID_CTX_ID;
spin_unlock_irqrestore(&stream->oa_buffer.ptr_lock, flags);
/*
* NB: although the OA buffer will initially be allocated
* zeroed via shmfs (and so this memset is redundant when
* first allocating), we may re-init the OA buffer, either
* when re-enabling a stream or in error/reset paths.
*
* The reason we clear the buffer for each re-init is for the
* sanity check in gen8_append_oa_reports() that looks at the
* reason field to make sure it's non-zero which relies on
* the assumption that new reports are being written to zeroed
* memory...
*/
memset(stream->oa_buffer.vaddr, 0,
stream->oa_buffer.vma->size);
}
static int alloc_oa_buffer(struct i915_perf_stream *stream)
{
struct drm_i915_private *i915 = stream->perf->i915;
struct intel_gt *gt = stream->engine->gt;
struct drm_i915_gem_object *bo;
struct i915_vma *vma;
int ret;
if (drm_WARN_ON(&i915->drm, stream->oa_buffer.vma))
return -ENODEV;
BUILD_BUG_ON_NOT_POWER_OF_2(OA_BUFFER_SIZE);
BUILD_BUG_ON(OA_BUFFER_SIZE < SZ_128K || OA_BUFFER_SIZE > SZ_16M);
bo = i915_gem_object_create_shmem(stream->perf->i915, OA_BUFFER_SIZE);
if (IS_ERR(bo)) {
drm_err(&i915->drm, "Failed to allocate OA buffer\n");
return PTR_ERR(bo);
}
i915_gem_object_set_cache_coherency(bo, I915_CACHE_LLC);
/* PreHSW required 512K alignment, HSW requires 16M */
vma = i915_vma_instance(bo, &gt->ggtt->vm, NULL);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto err_unref;
}
/*
* PreHSW required 512K alignment.
* HSW and onwards, align to requested size of OA buffer.
*/
ret = i915_vma_pin(vma, 0, SZ_16M, PIN_GLOBAL | PIN_HIGH);
if (ret) {
gt_err(gt, "Failed to pin OA buffer %d\n", ret);
goto err_unref;
}
stream->oa_buffer.vma = vma;
stream->oa_buffer.vaddr =
i915_gem_object_pin_map_unlocked(bo, I915_MAP_WB);
if (IS_ERR(stream->oa_buffer.vaddr)) {
ret = PTR_ERR(stream->oa_buffer.vaddr);
goto err_unpin;
}
return 0;
err_unpin:
__i915_vma_unpin(vma);
err_unref:
i915_gem_object_put(bo);
stream->oa_buffer.vaddr = NULL;
stream->oa_buffer.vma = NULL;
return ret;
}
static u32 *save_restore_register(struct i915_perf_stream *stream, u32 *cs,
bool save, i915_reg_t reg, u32 offset,
u32 dword_count)
{
u32 cmd;
u32 d;
cmd = save ? MI_STORE_REGISTER_MEM : MI_LOAD_REGISTER_MEM;
cmd |= MI_SRM_LRM_GLOBAL_GTT;
if (GRAPHICS_VER(stream->perf->i915) >= 8)
cmd++;
for (d = 0; d < dword_count; d++) {
*cs++ = cmd;
*cs++ = i915_mmio_reg_offset(reg) + 4 * d;
*cs++ = i915_ggtt_offset(stream->noa_wait) + offset + 4 * d;
*cs++ = 0;
}
return cs;
}
static int alloc_noa_wait(struct i915_perf_stream *stream)
{
struct drm_i915_private *i915 = stream->perf->i915;
struct intel_gt *gt = stream->engine->gt;
struct drm_i915_gem_object *bo;
struct i915_vma *vma;
const u64 delay_ticks = 0xffffffffffffffff -
intel_gt_ns_to_clock_interval(to_gt(stream->perf->i915),
atomic64_read(&stream->perf->noa_programming_delay));
const u32 base = stream->engine->mmio_base;
#define CS_GPR(x) GEN8_RING_CS_GPR(base, x)
u32 *batch, *ts0, *cs, *jump;
struct i915_gem_ww_ctx ww;
int ret, i;
enum {
START_TS,
NOW_TS,
DELTA_TS,
JUMP_PREDICATE,
DELTA_TARGET,
N_CS_GPR
};
i915_reg_t mi_predicate_result = HAS_MI_SET_PREDICATE(i915) ?
MI_PREDICATE_RESULT_2_ENGINE(base) :
MI_PREDICATE_RESULT_1(RENDER_RING_BASE);
/*
* gt->scratch was being used to save/restore the GPR registers, but on
* MTL the scratch uses stolen lmem. An MI_SRM to this memory region
* causes an engine hang. Instead allocate an additional page here to
* save/restore GPR registers
*/
bo = i915_gem_object_create_internal(i915, 8192);
if (IS_ERR(bo)) {
drm_err(&i915->drm,
"Failed to allocate NOA wait batchbuffer\n");
return PTR_ERR(bo);
}
i915_gem_ww_ctx_init(&ww, true);
retry:
ret = i915_gem_object_lock(bo, &ww);
if (ret)
goto out_ww;
/*
* We pin in GGTT because we jump into this buffer now because
* multiple OA config BOs will have a jump to this address and it
* needs to be fixed during the lifetime of the i915/perf stream.
*/
vma = i915_vma_instance(bo, &gt->ggtt->vm, NULL);
if (IS_ERR(vma)) {
ret = PTR_ERR(vma);
goto out_ww;
}
ret = i915_vma_pin_ww(vma, &ww, 0, 0, PIN_GLOBAL | PIN_HIGH);
if (ret)
goto out_ww;
batch = cs = i915_gem_object_pin_map(bo, I915_MAP_WB);
if (IS_ERR(batch)) {
ret = PTR_ERR(batch);
goto err_unpin;
}
stream->noa_wait = vma;
#define GPR_SAVE_OFFSET 4096
#define PREDICATE_SAVE_OFFSET 4160
/* Save registers. */
for (i = 0; i < N_CS_GPR; i++)
cs = save_restore_register(
stream, cs, true /* save */, CS_GPR(i),
GPR_SAVE_OFFSET + 8 * i, 2);
cs = save_restore_register(
stream, cs, true /* save */, mi_predicate_result,
PREDICATE_SAVE_OFFSET, 1);
/* First timestamp snapshot location. */
ts0 = cs;
/*
* Initial snapshot of the timestamp register to implement the wait.
* We work with 32b values, so clear out the top 32b bits of the
* register because the ALU works 64bits.
*/
*cs++ = MI_LOAD_REGISTER_IMM(1);
*cs++ = i915_mmio_reg_offset(CS_GPR(START_TS)) + 4;
*cs++ = 0;
*cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
*cs++ = i915_mmio_reg_offset(RING_TIMESTAMP(base));
*cs++ = i915_mmio_reg_offset(CS_GPR(START_TS));
/*
* This is the location we're going to jump back into until the
* required amount of time has passed.
*/
jump = cs;
/*
* Take another snapshot of the timestamp register. Take care to clear
* up the top 32bits of CS_GPR(1) as we're using it for other
* operations below.
*/
*cs++ = MI_LOAD_REGISTER_IMM(1);
*cs++ = i915_mmio_reg_offset(CS_GPR(NOW_TS)) + 4;
*cs++ = 0;
*cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
*cs++ = i915_mmio_reg_offset(RING_TIMESTAMP(base));
*cs++ = i915_mmio_reg_offset(CS_GPR(NOW_TS));
/*
* Do a diff between the 2 timestamps and store the result back into
* CS_GPR(1).
*/
*cs++ = MI_MATH(5);
*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(NOW_TS));
*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(START_TS));
*cs++ = MI_MATH_SUB;
*cs++ = MI_MATH_STORE(MI_MATH_REG(DELTA_TS), MI_MATH_REG_ACCU);
*cs++ = MI_MATH_STORE(MI_MATH_REG(JUMP_PREDICATE), MI_MATH_REG_CF);
/*
* Transfer the carry flag (set to 1 if ts1 < ts0, meaning the
* timestamp have rolled over the 32bits) into the predicate register
* to be used for the predicated jump.
*/
*cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
*cs++ = i915_mmio_reg_offset(CS_GPR(JUMP_PREDICATE));
*cs++ = i915_mmio_reg_offset(mi_predicate_result);
if (HAS_MI_SET_PREDICATE(i915))
*cs++ = MI_SET_PREDICATE | 1;
/* Restart from the beginning if we had timestamps roll over. */
*cs++ = (GRAPHICS_VER(i915) < 8 ?
MI_BATCH_BUFFER_START :
MI_BATCH_BUFFER_START_GEN8) |
MI_BATCH_PREDICATE;
*cs++ = i915_ggtt_offset(vma) + (ts0 - batch) * 4;
*cs++ = 0;
if (HAS_MI_SET_PREDICATE(i915))
*cs++ = MI_SET_PREDICATE;
/*
* Now add the diff between to previous timestamps and add it to :
* (((1 * << 64) - 1) - delay_ns)
*
* When the Carry Flag contains 1 this means the elapsed time is
* longer than the expected delay, and we can exit the wait loop.
*/
*cs++ = MI_LOAD_REGISTER_IMM(2);
*cs++ = i915_mmio_reg_offset(CS_GPR(DELTA_TARGET));
*cs++ = lower_32_bits(delay_ticks);
*cs++ = i915_mmio_reg_offset(CS_GPR(DELTA_TARGET)) + 4;
*cs++ = upper_32_bits(delay_ticks);
*cs++ = MI_MATH(4);
*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCA, MI_MATH_REG(DELTA_TS));
*cs++ = MI_MATH_LOAD(MI_MATH_REG_SRCB, MI_MATH_REG(DELTA_TARGET));
*cs++ = MI_MATH_ADD;
*cs++ = MI_MATH_STOREINV(MI_MATH_REG(JUMP_PREDICATE), MI_MATH_REG_CF);
*cs++ = MI_ARB_CHECK;
/*
* Transfer the result into the predicate register to be used for the
* predicated jump.
*/
*cs++ = MI_LOAD_REGISTER_REG | (3 - 2);
*cs++ = i915_mmio_reg_offset(CS_GPR(JUMP_PREDICATE));
*cs++ = i915_mmio_reg_offset(mi_predicate_result);
if (HAS_MI_SET_PREDICATE(i915))
*cs++ = MI_SET_PREDICATE | 1;
/* Predicate the jump. */
*cs++ = (GRAPHICS_VER(i915) < 8 ?
MI_BATCH_BUFFER_START :
MI_BATCH_BUFFER_START_GEN8) |
MI_BATCH_PREDICATE;
*cs++ = i915_ggtt_offset(vma) + (jump - batch) * 4;
*cs++ = 0;
if (HAS_MI_SET_PREDICATE(i915))
*cs++ = MI_SET_PREDICATE;
/* Restore registers. */
for (i = 0; i < N_CS_GPR; i++)
cs = save_restore_register(
stream, cs, false /* restore */, CS_GPR(i),
GPR_SAVE_OFFSET + 8 * i, 2);
cs = save_restore_register(
stream, cs, false /* restore */, mi_predicate_result,
PREDICATE_SAVE_OFFSET, 1);
/* And return to the ring. */
*cs++ = MI_BATCH_BUFFER_END;
GEM_BUG_ON(cs - batch > PAGE_SIZE / sizeof(*batch));
i915_gem_object_flush_map(bo);
__i915_gem_object_release_map(bo);
goto out_ww;
err_unpin:
i915_vma_unpin_and_release(&vma, 0);
out_ww:
if (ret == -EDEADLK) {
ret = i915_gem_ww_ctx_backoff(&ww);
if (!ret)
goto retry;
}
i915_gem_ww_ctx_fini(&ww);
if (ret)
i915_gem_object_put(bo);
return ret;
}
static u32 *write_cs_mi_lri(u32 *cs,
const struct i915_oa_reg *reg_data,
u32 n_regs)
{
u32 i;
for (i = 0; i < n_regs; i++) {
if ((i % MI_LOAD_REGISTER_IMM_MAX_REGS) == 0) {
u32 n_lri = min_t(u32,
n_regs - i,
MI_LOAD_REGISTER_IMM_MAX_REGS);
*cs++ = MI_LOAD_REGISTER_IMM(n_lri);
}
*cs++ = i915_mmio_reg_offset(reg_data[i].addr);
*cs++ = reg_data[i].value;
}
return cs;
}
static int num_lri_dwords(int num_regs)
{
int count = 0;
if (num_regs > 0) {
count += DIV_ROUND_UP(num_regs, MI_LOAD_REGISTER_IMM_MAX_REGS);
count += num_regs * 2;
}
return count;
}
static struct i915_oa_config_bo *
alloc_oa_config_buffer(struct i915_perf_stream *stream,
struct i915_oa_config *oa_config)
{
struct drm_i915_gem_object *obj;
struct i915_oa_config_bo *oa_bo;
struct i915_gem_ww_ctx ww;
size_t config_length = 0;
u32 *cs;
int err;
oa_bo = kzalloc(sizeof(*oa_bo), GFP_KERNEL);
if (!oa_bo)
return ERR_PTR(-ENOMEM);
config_length += num_lri_dwords(oa_config->mux_regs_len);
config_length += num_lri_dwords(oa_config->b_counter_regs_len);
config_length += num_lri_dwords(oa_config->flex_regs_len);
config_length += 3; /* MI_BATCH_BUFFER_START */
config_length = ALIGN(sizeof(u32) * config_length, I915_GTT_PAGE_SIZE);
obj = i915_gem_object_create_shmem(stream->perf->i915, config_length);
if (IS_ERR(obj)) {
err = PTR_ERR(obj);
goto err_free;
}
i915_gem_ww_ctx_init(&ww, true);
retry:
err = i915_gem_object_lock(obj, &ww);
if (err)
goto out_ww;
cs = i915_gem_object_pin_map(obj, I915_MAP_WB);
if (IS_ERR(cs)) {
err = PTR_ERR(cs);
goto out_ww;
}
cs = write_cs_mi_lri(cs,
oa_config->mux_regs,
oa_config->mux_regs_len);
cs = write_cs_mi_lri(cs,
oa_config->b_counter_regs,
oa_config->b_counter_regs_len);
cs = write_cs_mi_lri(cs,
oa_config->flex_regs,
oa_config->flex_regs_len);
/* Jump into the active wait. */
*cs++ = (GRAPHICS_VER(stream->perf->i915) < 8 ?
MI_BATCH_BUFFER_START :
MI_BATCH_BUFFER_START_GEN8);
*cs++ = i915_ggtt_offset(stream->noa_wait);
*cs++ = 0;
i915_gem_object_flush_map(obj);
__i915_gem_object_release_map(obj);
oa_bo->vma = i915_vma_instance(obj,
&stream->engine->gt->ggtt->vm,
NULL);
if (IS_ERR(oa_bo->vma)) {
err = PTR_ERR(oa_bo->vma);
goto out_ww;
}
oa_bo->oa_config = i915_oa_config_get(oa_config);
llist_add(&oa_bo->node, &stream->oa_config_bos);
out_ww:
if (err == -EDEADLK) {
err = i915_gem_ww_ctx_backoff(&ww);
if (!err)
goto retry;
}
i915_gem_ww_ctx_fini(&ww);
if (err)
i915_gem_object_put(obj);
err_free:
if (err) {
kfree(oa_bo);
return ERR_PTR(err);
}
return oa_bo;
}
static struct i915_vma *
get_oa_vma(struct i915_perf_stream *stream, struct i915_oa_config *oa_config)
{
struct i915_oa_config_bo *oa_bo;
/*
* Look for the buffer in the already allocated BOs attached
* to the stream.
*/
llist_for_each_entry(oa_bo, stream->oa_config_bos.first, node) {
if (oa_bo->oa_config == oa_config &&
memcmp(oa_bo->oa_config->uuid,
oa_config->uuid,
sizeof(oa_config->uuid)) == 0)
goto out;
}
oa_bo = alloc_oa_config_buffer(stream, oa_config);
if (IS_ERR(oa_bo))
return ERR_CAST(oa_bo);
out:
return i915_vma_get(oa_bo->vma);
}
static int
emit_oa_config(struct i915_perf_stream *stream,
struct i915_oa_config *oa_config,
struct intel_context *ce,
struct i915_active *active)
{
struct i915_request *rq;
struct i915_vma *vma;
struct i915_gem_ww_ctx ww;
int err;
vma = get_oa_vma(stream, oa_config);
if (IS_ERR(vma))
return PTR_ERR(vma);
i915_gem_ww_ctx_init(&ww, true);
retry:
err = i915_gem_object_lock(vma->obj, &ww);
if (err)
goto err;
err = i915_vma_pin_ww(vma, &ww, 0, 0, PIN_GLOBAL | PIN_HIGH);
if (err)
goto err;
intel_engine_pm_get(ce->engine);
rq = i915_request_create(ce);
intel_engine_pm_put(ce->engine);
if (IS_ERR(rq)) {
err = PTR_ERR(rq);
goto err_vma_unpin;
}
if (!IS_ERR_OR_NULL(active)) {
/* After all individual context modifications */
err = i915_request_await_active(rq, active,
I915_ACTIVE_AWAIT_ACTIVE);
if (err)
goto err_add_request;
err = i915_active_add_request(active, rq);
if (err)
goto err_add_request;
}
err = i915_vma_move_to_active(vma, rq, 0);
if (err)
goto err_add_request;
err = rq->engine->emit_bb_start(rq,
i915_vma_offset(vma), 0,
I915_DISPATCH_SECURE);
if (err)
goto err_add_request;
err_add_request:
i915_request_add(rq);
err_vma_unpin:
i915_vma_unpin(vma);
err:
if (err == -EDEADLK) {
err = i915_gem_ww_ctx_backoff(&ww);
if (!err)
goto retry;
}
i915_gem_ww_ctx_fini(&ww);
i915_vma_put(vma);
return err;
}
static struct intel_context *oa_context(struct i915_perf_stream *stream)
{
return stream->pinned_ctx ?: stream->engine->kernel_context;
}
static int
hsw_enable_metric_set(struct i915_perf_stream *stream,
struct i915_active *active)
{
struct intel_uncore *uncore = stream->uncore;
/*
* PRM:
*
* OA unit is using “crclk” for its functionality. When trunk
* level clock gating takes place, OA clock would be gated,
* unable to count the events from non-render clock domain.
* Render clock gating must be disabled when OA is enabled to
* count the events from non-render domain. Unit level clock
* gating for RCS should also be disabled.
*/
intel_uncore_rmw(uncore, GEN7_MISCCPCTL,
GEN7_DOP_CLOCK_GATE_ENABLE, 0);
intel_uncore_rmw(uncore, GEN6_UCGCTL1,
0, GEN6_CSUNIT_CLOCK_GATE_DISABLE);
return emit_oa_config(stream,
stream->oa_config, oa_context(stream),
active);
}
static void hsw_disable_metric_set(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
intel_uncore_rmw(uncore, GEN6_UCGCTL1,
GEN6_CSUNIT_CLOCK_GATE_DISABLE, 0);
intel_uncore_rmw(uncore, GEN7_MISCCPCTL,
0, GEN7_DOP_CLOCK_GATE_ENABLE);
intel_uncore_rmw(uncore, GDT_CHICKEN_BITS, GT_NOA_ENABLE, 0);
}
static u32 oa_config_flex_reg(const struct i915_oa_config *oa_config,
i915_reg_t reg)
{
u32 mmio = i915_mmio_reg_offset(reg);
int i;
/*
* This arbitrary default will select the 'EU FPU0 Pipeline
* Active' event. In the future it's anticipated that there
* will be an explicit 'No Event' we can select, but not yet...
*/
if (!oa_config)
return 0;
for (i = 0; i < oa_config->flex_regs_len; i++) {
if (i915_mmio_reg_offset(oa_config->flex_regs[i].addr) == mmio)
return oa_config->flex_regs[i].value;
}
return 0;
}
/*
* NB: It must always remain pointer safe to run this even if the OA unit
* has been disabled.
*
* It's fine to put out-of-date values into these per-context registers
* in the case that the OA unit has been disabled.
*/
static void
gen8_update_reg_state_unlocked(const struct intel_context *ce,
const struct i915_perf_stream *stream)
{
u32 ctx_oactxctrl = stream->perf->ctx_oactxctrl_offset;
u32 ctx_flexeu0 = stream->perf->ctx_flexeu0_offset;
/* The MMIO offsets for Flex EU registers aren't contiguous */
static const i915_reg_t flex_regs[] = {
EU_PERF_CNTL0,
EU_PERF_CNTL1,
EU_PERF_CNTL2,
EU_PERF_CNTL3,
EU_PERF_CNTL4,
EU_PERF_CNTL5,
EU_PERF_CNTL6,
};
u32 *reg_state = ce->lrc_reg_state;
int i;
reg_state[ctx_oactxctrl + 1] =
(stream->period_exponent << GEN8_OA_TIMER_PERIOD_SHIFT) |
(stream->periodic ? GEN8_OA_TIMER_ENABLE : 0) |
GEN8_OA_COUNTER_RESUME;
for (i = 0; i < ARRAY_SIZE(flex_regs); i++)
reg_state[ctx_flexeu0 + i * 2 + 1] =
oa_config_flex_reg(stream->oa_config, flex_regs[i]);
}
struct flex {
i915_reg_t reg;
u32 offset;
u32 value;
};
static int
gen8_store_flex(struct i915_request *rq,
struct intel_context *ce,
const struct flex *flex, unsigned int count)
{
u32 offset;
u32 *cs;
cs = intel_ring_begin(rq, 4 * count);
if (IS_ERR(cs))
return PTR_ERR(cs);
offset = i915_ggtt_offset(ce->state) + LRC_STATE_OFFSET;
do {
*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
*cs++ = offset + flex->offset * sizeof(u32);
*cs++ = 0;
*cs++ = flex->value;
} while (flex++, --count);
intel_ring_advance(rq, cs);
return 0;
}
static int
gen8_load_flex(struct i915_request *rq,
struct intel_context *ce,
const struct flex *flex, unsigned int count)
{
u32 *cs;
GEM_BUG_ON(!count || count > 63);
cs = intel_ring_begin(rq, 2 * count + 2);
if (IS_ERR(cs))
return PTR_ERR(cs);
*cs++ = MI_LOAD_REGISTER_IMM(count);
do {
*cs++ = i915_mmio_reg_offset(flex->reg);
*cs++ = flex->value;
} while (flex++, --count);
*cs++ = MI_NOOP;
intel_ring_advance(rq, cs);
return 0;
}
static int gen8_modify_context(struct intel_context *ce,
const struct flex *flex, unsigned int count)
{
struct i915_request *rq;
int err;
rq = intel_engine_create_kernel_request(ce->engine);
if (IS_ERR(rq))
return PTR_ERR(rq);
/* Serialise with the remote context */
err = intel_context_prepare_remote_request(ce, rq);
if (err == 0)
err = gen8_store_flex(rq, ce, flex, count);
i915_request_add(rq);
return err;
}
static int
gen8_modify_self(struct intel_context *ce,
const struct flex *flex, unsigned int count,
struct i915_active *active)
{
struct i915_request *rq;
int err;
intel_engine_pm_get(ce->engine);
rq = i915_request_create(ce);
intel_engine_pm_put(ce->engine);
if (IS_ERR(rq))
return PTR_ERR(rq);
if (!IS_ERR_OR_NULL(active)) {
err = i915_active_add_request(active, rq);
if (err)
goto err_add_request;
}
err = gen8_load_flex(rq, ce, flex, count);
if (err)
goto err_add_request;
err_add_request:
i915_request_add(rq);
return err;
}
static int gen8_configure_context(struct i915_perf_stream *stream,
struct i915_gem_context *ctx,
struct flex *flex, unsigned int count)
{
struct i915_gem_engines_iter it;
struct intel_context *ce;
int err = 0;
for_each_gem_engine(ce, i915_gem_context_lock_engines(ctx), it) {
GEM_BUG_ON(ce == ce->engine->kernel_context);
if (ce->engine->class != RENDER_CLASS)
continue;
/* Otherwise OA settings will be set upon first use */
if (!intel_context_pin_if_active(ce))
continue;
flex->value = intel_sseu_make_rpcs(ce->engine->gt, &ce->sseu);
err = gen8_modify_context(ce, flex, count);
intel_context_unpin(ce);
if (err)
break;
}
i915_gem_context_unlock_engines(ctx);
return err;
}
static int gen12_configure_oar_context(struct i915_perf_stream *stream,
struct i915_active *active)
{
int err;
struct intel_context *ce = stream->pinned_ctx;
u32 format = stream->oa_buffer.format->format;
u32 offset = stream->perf->ctx_oactxctrl_offset;
struct flex regs_context[] = {
{
GEN8_OACTXCONTROL,
offset + 1,
active ? GEN8_OA_COUNTER_RESUME : 0,
},
};
/* Offsets in regs_lri are not used since this configuration is only
* applied using LRI. Initialize the correct offsets for posterity.
*/
#define GEN12_OAR_OACONTROL_OFFSET 0x5B0
struct flex regs_lri[] = {
{
GEN12_OAR_OACONTROL,
GEN12_OAR_OACONTROL_OFFSET + 1,
(format << GEN12_OAR_OACONTROL_COUNTER_FORMAT_SHIFT) |
(active ? GEN12_OAR_OACONTROL_COUNTER_ENABLE : 0)
},
{
RING_CONTEXT_CONTROL(ce->engine->mmio_base),
CTX_CONTEXT_CONTROL,
_MASKED_FIELD(GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE,
active ?
GEN12_CTX_CTRL_OAR_CONTEXT_ENABLE :
0)
},
};
/* Modify the context image of pinned context with regs_context */
err = intel_context_lock_pinned(ce);
if (err)
return err;
err = gen8_modify_context(ce, regs_context,
ARRAY_SIZE(regs_context));
intel_context_unlock_pinned(ce);
if (err)
return err;
/* Apply regs_lri using LRI with pinned context */
return gen8_modify_self(ce, regs_lri, ARRAY_SIZE(regs_lri), active);
}
/*
* Manages updating the per-context aspects of the OA stream
* configuration across all contexts.
*
* The awkward consideration here is that OACTXCONTROL controls the
* exponent for periodic sampling which is primarily used for system
* wide profiling where we'd like a consistent sampling period even in
* the face of context switches.
*
* Our approach of updating the register state context (as opposed to
* say using a workaround batch buffer) ensures that the hardware
* won't automatically reload an out-of-date timer exponent even
* transiently before a WA BB could be parsed.
*
* This function needs to:
* - Ensure the currently running context's per-context OA state is
* updated
* - Ensure that all existing contexts will have the correct per-context
* OA state if they are scheduled for use.
* - Ensure any new contexts will be initialized with the correct
* per-context OA state.
*
* Note: it's only the RCS/Render context that has any OA state.
* Note: the first flex register passed must always be R_PWR_CLK_STATE
*/
static int
oa_configure_all_contexts(struct i915_perf_stream *stream,
struct flex *regs,
size_t num_regs,
struct i915_active *active)
{
struct drm_i915_private *i915 = stream->perf->i915;
struct intel_engine_cs *engine;
struct intel_gt *gt = stream->engine->gt;
struct i915_gem_context *ctx, *cn;
int err;
lockdep_assert_held(&gt->perf.lock);
/*
* The OA register config is setup through the context image. This image
* might be written to by the GPU on context switch (in particular on
* lite-restore). This means we can't safely update a context's image,
* if this context is scheduled/submitted to run on the GPU.
*
* We could emit the OA register config through the batch buffer but
* this might leave small interval of time where the OA unit is
* configured at an invalid sampling period.
*
* Note that since we emit all requests from a single ring, there
* is still an implicit global barrier here that may cause a high
* priority context to wait for an otherwise independent low priority
* context. Contexts idle at the time of reconfiguration are not
* trapped behind the barrier.
*/
spin_lock(&i915->gem.contexts.lock);
list_for_each_entry_safe(ctx, cn, &i915->gem.contexts.list, link) {
if (!kref_get_unless_zero(&ctx->ref))
continue;
spin_unlock(&i915->gem.contexts.lock);
err = gen8_configure_context(stream, ctx, regs, num_regs);
if (err) {
i915_gem_context_put(ctx);
return err;
}
spin_lock(&i915->gem.contexts.lock);
list_safe_reset_next(ctx, cn, link);
i915_gem_context_put(ctx);
}
spin_unlock(&i915->gem.contexts.lock);
/*
* After updating all other contexts, we need to modify ourselves.
* If we don't modify the kernel_context, we do not get events while
* idle.
*/
for_each_uabi_engine(engine, i915) {
struct intel_context *ce = engine->kernel_context;
if (engine->class != RENDER_CLASS)
continue;
regs[0].value = intel_sseu_make_rpcs(engine->gt, &ce->sseu);
err = gen8_modify_self(ce, regs, num_regs, active);
if (err)
return err;
}
return 0;
}
static int
gen12_configure_all_contexts(struct i915_perf_stream *stream,
const struct i915_oa_config *oa_config,
struct i915_active *active)
{
struct flex regs[] = {
{
GEN8_R_PWR_CLK_STATE(RENDER_RING_BASE),
CTX_R_PWR_CLK_STATE,
},
};
if (stream->engine->class != RENDER_CLASS)
return 0;
return oa_configure_all_contexts(stream,
regs, ARRAY_SIZE(regs),
active);
}
static int
lrc_configure_all_contexts(struct i915_perf_stream *stream,
const struct i915_oa_config *oa_config,
struct i915_active *active)
{
u32 ctx_oactxctrl = stream->perf->ctx_oactxctrl_offset;
/* The MMIO offsets for Flex EU registers aren't contiguous */
const u32 ctx_flexeu0 = stream->perf->ctx_flexeu0_offset;
#define ctx_flexeuN(N) (ctx_flexeu0 + 2 * (N) + 1)
struct flex regs[] = {
{
GEN8_R_PWR_CLK_STATE(RENDER_RING_BASE),
CTX_R_PWR_CLK_STATE,
},
{
GEN8_OACTXCONTROL,
ctx_oactxctrl + 1,
},
{ EU_PERF_CNTL0, ctx_flexeuN(0) },
{ EU_PERF_CNTL1, ctx_flexeuN(1) },
{ EU_PERF_CNTL2, ctx_flexeuN(2) },
{ EU_PERF_CNTL3, ctx_flexeuN(3) },
{ EU_PERF_CNTL4, ctx_flexeuN(4) },
{ EU_PERF_CNTL5, ctx_flexeuN(5) },
{ EU_PERF_CNTL6, ctx_flexeuN(6) },
};
#undef ctx_flexeuN
int i;
regs[1].value =
(stream->period_exponent << GEN8_OA_TIMER_PERIOD_SHIFT) |
(stream->periodic ? GEN8_OA_TIMER_ENABLE : 0) |
GEN8_OA_COUNTER_RESUME;
for (i = 2; i < ARRAY_SIZE(regs); i++)
regs[i].value = oa_config_flex_reg(oa_config, regs[i].reg);
return oa_configure_all_contexts(stream,
regs, ARRAY_SIZE(regs),
active);
}
static int
gen8_enable_metric_set(struct i915_perf_stream *stream,
struct i915_active *active)
{
struct intel_uncore *uncore = stream->uncore;
struct i915_oa_config *oa_config = stream->oa_config;
int ret;
/*
* We disable slice/unslice clock ratio change reports on SKL since
* they are too noisy. The HW generates a lot of redundant reports
* where the ratio hasn't really changed causing a lot of redundant
* work to processes and increasing the chances we'll hit buffer
* overruns.
*
* Although we don't currently use the 'disable overrun' OABUFFER
* feature it's worth noting that clock ratio reports have to be
* disabled before considering to use that feature since the HW doesn't
* correctly block these reports.
*
* Currently none of the high-level metrics we have depend on knowing
* this ratio to normalize.
*
* Note: This register is not power context saved and restored, but
* that's OK considering that we disable RC6 while the OA unit is
* enabled.
*
* The _INCLUDE_CLK_RATIO bit allows the slice/unslice frequency to
* be read back from automatically triggered reports, as part of the
* RPT_ID field.
*/
if (IS_GRAPHICS_VER(stream->perf->i915, 9, 11)) {
intel_uncore_write(uncore, GEN8_OA_DEBUG,
_MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
GEN9_OA_DEBUG_INCLUDE_CLK_RATIO));
}
/*
* Update all contexts prior writing the mux configurations as we need
* to make sure all slices/subslices are ON before writing to NOA
* registers.
*/
ret = lrc_configure_all_contexts(stream, oa_config, active);
if (ret)
return ret;
return emit_oa_config(stream,
stream->oa_config, oa_context(stream),
active);
}
static u32 oag_report_ctx_switches(const struct i915_perf_stream *stream)
{
return _MASKED_FIELD(GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS,
(stream->sample_flags & SAMPLE_OA_REPORT) ?
0 : GEN12_OAG_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS);
}
static int
gen12_enable_metric_set(struct i915_perf_stream *stream,
struct i915_active *active)
{
struct drm_i915_private *i915 = stream->perf->i915;
struct intel_uncore *uncore = stream->uncore;
struct i915_oa_config *oa_config = stream->oa_config;
bool periodic = stream->periodic;
u32 period_exponent = stream->period_exponent;
u32 sqcnt1;
int ret;
/*
* Wa_1508761755:xehpsdv, dg2
* EU NOA signals behave incorrectly if EU clock gating is enabled.
* Disable thread stall DOP gating and EU DOP gating.
*/
if (IS_XEHPSDV(i915) || IS_DG2(i915)) {
intel_gt_mcr_multicast_write(uncore->gt, GEN8_ROW_CHICKEN,
_MASKED_BIT_ENABLE(STALL_DOP_GATING_DISABLE));
intel_uncore_write(uncore, GEN7_ROW_CHICKEN2,
_MASKED_BIT_ENABLE(GEN12_DISABLE_DOP_GATING));
}
intel_uncore_write(uncore, __oa_regs(stream)->oa_debug,
/* Disable clk ratio reports, like previous Gens. */
_MASKED_BIT_ENABLE(GEN12_OAG_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS |
GEN12_OAG_OA_DEBUG_INCLUDE_CLK_RATIO) |
/*
* If the user didn't require OA reports, instruct
* the hardware not to emit ctx switch reports.
*/
oag_report_ctx_switches(stream));
intel_uncore_write(uncore, __oa_regs(stream)->oa_ctx_ctrl, periodic ?
(GEN12_OAG_OAGLBCTXCTRL_COUNTER_RESUME |
GEN12_OAG_OAGLBCTXCTRL_TIMER_ENABLE |
(period_exponent << GEN12_OAG_OAGLBCTXCTRL_TIMER_PERIOD_SHIFT))
: 0);
/*
* Initialize Super Queue Internal Cnt Register
* Set PMON Enable in order to collect valid metrics.
* Enable byets per clock reporting in OA for XEHPSDV onward.
*/
sqcnt1 = GEN12_SQCNT1_PMON_ENABLE |
(HAS_OA_BPC_REPORTING(i915) ? GEN12_SQCNT1_OABPC : 0);
intel_uncore_rmw(uncore, GEN12_SQCNT1, 0, sqcnt1);
/*
* Update all contexts prior writing the mux configurations as we need
* to make sure all slices/subslices are ON before writing to NOA
* registers.
*/
ret = gen12_configure_all_contexts(stream, oa_config, active);
if (ret)
return ret;
/*
* For Gen12, performance counters are context
* saved/restored. Only enable it for the context that
* requested this.
*/
if (stream->ctx) {
ret = gen12_configure_oar_context(stream, active);
if (ret)
return ret;
}
return emit_oa_config(stream,
stream->oa_config, oa_context(stream),
active);
}
static void gen8_disable_metric_set(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
/* Reset all contexts' slices/subslices configurations. */
lrc_configure_all_contexts(stream, NULL, NULL);
intel_uncore_rmw(uncore, GDT_CHICKEN_BITS, GT_NOA_ENABLE, 0);
}
static void gen11_disable_metric_set(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
/* Reset all contexts' slices/subslices configurations. */
lrc_configure_all_contexts(stream, NULL, NULL);
/* Make sure we disable noa to save power. */
intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
}
static void gen12_disable_metric_set(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
struct drm_i915_private *i915 = stream->perf->i915;
u32 sqcnt1;
/*
* Wa_1508761755:xehpsdv, dg2
* Enable thread stall DOP gating and EU DOP gating.
*/
if (IS_XEHPSDV(i915) || IS_DG2(i915)) {
intel_gt_mcr_multicast_write(uncore->gt, GEN8_ROW_CHICKEN,
_MASKED_BIT_DISABLE(STALL_DOP_GATING_DISABLE));
intel_uncore_write(uncore, GEN7_ROW_CHICKEN2,
_MASKED_BIT_DISABLE(GEN12_DISABLE_DOP_GATING));
}
/* Reset all contexts' slices/subslices configurations. */
gen12_configure_all_contexts(stream, NULL, NULL);
/* disable the context save/restore or OAR counters */
if (stream->ctx)
gen12_configure_oar_context(stream, NULL);
/* Make sure we disable noa to save power. */
intel_uncore_rmw(uncore, RPM_CONFIG1, GEN10_GT_NOA_ENABLE, 0);
sqcnt1 = GEN12_SQCNT1_PMON_ENABLE |
(HAS_OA_BPC_REPORTING(i915) ? GEN12_SQCNT1_OABPC : 0);
/* Reset PMON Enable to save power. */
intel_uncore_rmw(uncore, GEN12_SQCNT1, sqcnt1, 0);
}
static void gen7_oa_enable(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
struct i915_gem_context *ctx = stream->ctx;
u32 ctx_id = stream->specific_ctx_id;
bool periodic = stream->periodic;
u32 period_exponent = stream->period_exponent;
u32 report_format = stream->oa_buffer.format->format;
/*
* Reset buf pointers so we don't forward reports from before now.
*
* Think carefully if considering trying to avoid this, since it
* also ensures status flags and the buffer itself are cleared
* in error paths, and we have checks for invalid reports based
* on the assumption that certain fields are written to zeroed
* memory which this helps maintains.
*/
gen7_init_oa_buffer(stream);
intel_uncore_write(uncore, GEN7_OACONTROL,
(ctx_id & GEN7_OACONTROL_CTX_MASK) |
(period_exponent <<
GEN7_OACONTROL_TIMER_PERIOD_SHIFT) |
(periodic ? GEN7_OACONTROL_TIMER_ENABLE : 0) |
(report_format << GEN7_OACONTROL_FORMAT_SHIFT) |
(ctx ? GEN7_OACONTROL_PER_CTX_ENABLE : 0) |
GEN7_OACONTROL_ENABLE);
}
static void gen8_oa_enable(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
u32 report_format = stream->oa_buffer.format->format;
/*
* Reset buf pointers so we don't forward reports from before now.
*
* Think carefully if considering trying to avoid this, since it
* also ensures status flags and the buffer itself are cleared
* in error paths, and we have checks for invalid reports based
* on the assumption that certain fields are written to zeroed
* memory which this helps maintains.
*/
gen8_init_oa_buffer(stream);
/*
* Note: we don't rely on the hardware to perform single context
* filtering and instead filter on the cpu based on the context-id
* field of reports
*/
intel_uncore_write(uncore, GEN8_OACONTROL,
(report_format << GEN8_OA_REPORT_FORMAT_SHIFT) |
GEN8_OA_COUNTER_ENABLE);
}
static void gen12_oa_enable(struct i915_perf_stream *stream)
{
const struct i915_perf_regs *regs;
u32 val;
/*
* If we don't want OA reports from the OA buffer, then we don't even
* need to program the OAG unit.
*/
if (!(stream->sample_flags & SAMPLE_OA_REPORT))
return;
gen12_init_oa_buffer(stream);
regs = __oa_regs(stream);
val = (stream->oa_buffer.format->format << regs->oa_ctrl_counter_format_shift) |
GEN12_OAG_OACONTROL_OA_COUNTER_ENABLE;
intel_uncore_write(stream->uncore, regs->oa_ctrl, val);
}
/**
* i915_oa_stream_enable - handle `I915_PERF_IOCTL_ENABLE` for OA stream
* @stream: An i915 perf stream opened for OA metrics
*
* [Re]enables hardware periodic sampling according to the period configured
* when opening the stream. This also starts a hrtimer that will periodically
* check for data in the circular OA buffer for notifying userspace (e.g.
* during a read() or poll()).
*/
static void i915_oa_stream_enable(struct i915_perf_stream *stream)
{
stream->pollin = false;
stream->perf->ops.oa_enable(stream);
if (stream->sample_flags & SAMPLE_OA_REPORT)
hrtimer_start(&stream->poll_check_timer,
ns_to_ktime(stream->poll_oa_period),
HRTIMER_MODE_REL_PINNED);
}
static void gen7_oa_disable(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
intel_uncore_write(uncore, GEN7_OACONTROL, 0);
if (intel_wait_for_register(uncore,
GEN7_OACONTROL, GEN7_OACONTROL_ENABLE, 0,
50))
drm_err(&stream->perf->i915->drm,
"wait for OA to be disabled timed out\n");
}
static void gen8_oa_disable(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
intel_uncore_write(uncore, GEN8_OACONTROL, 0);
if (intel_wait_for_register(uncore,
GEN8_OACONTROL, GEN8_OA_COUNTER_ENABLE, 0,
50))
drm_err(&stream->perf->i915->drm,
"wait for OA to be disabled timed out\n");
}
static void gen12_oa_disable(struct i915_perf_stream *stream)
{
struct intel_uncore *uncore = stream->uncore;
intel_uncore_write(uncore, __oa_regs(stream)->oa_ctrl, 0);
if (intel_wait_for_register(uncore,
__oa_regs(stream)->oa_ctrl,
GEN12_OAG_OACONTROL_OA_COUNTER_ENABLE, 0,
50))
drm_err(&stream->perf->i915->drm,
"wait for OA to be disabled timed out\n");
intel_uncore_write(uncore, GEN12_OA_TLB_INV_CR, 1);
if (intel_wait_for_register(uncore,
GEN12_OA_TLB_INV_CR,
1, 0,
50))
drm_err(&stream->perf->i915->drm,
"wait for OA tlb invalidate timed out\n");
}
/**
* i915_oa_stream_disable - handle `I915_PERF_IOCTL_DISABLE` for OA stream
* @stream: An i915 perf stream opened for OA metrics
*
* Stops the OA unit from periodically writing counter reports into the
* circular OA buffer. This also stops the hrtimer that periodically checks for
* data in the circular OA buffer, for notifying userspace.
*/
static void i915_oa_stream_disable(struct i915_perf_stream *stream)
{
stream->perf->ops.oa_disable(stream);
if (stream->sample_flags & SAMPLE_OA_REPORT)
hrtimer_cancel(&stream->poll_check_timer);
}
static const struct i915_perf_stream_ops i915_oa_stream_ops = {
.destroy = i915_oa_stream_destroy,
.enable = i915_oa_stream_enable,
.disable = i915_oa_stream_disable,
.wait_unlocked = i915_oa_wait_unlocked,
.poll_wait = i915_oa_poll_wait,
.read = i915_oa_read,
};
static int i915_perf_stream_enable_sync(struct i915_perf_stream *stream)
{
struct i915_active *active;
int err;
active = i915_active_create();
if (!active)
return -ENOMEM;
err = stream->perf->ops.enable_metric_set(stream, active);
if (err == 0)
__i915_active_wait(active, TASK_UNINTERRUPTIBLE);
i915_active_put(active);
return err;
}
static void
get_default_sseu_config(struct intel_sseu *out_sseu,
struct intel_engine_cs *engine)
{
const struct sseu_dev_info *devinfo_sseu = &engine->gt->info.sseu;
*out_sseu = intel_sseu_from_device_info(devinfo_sseu);
if (GRAPHICS_VER(engine->i915) == 11) {
/*
* We only need subslice count so it doesn't matter which ones
* we select - just turn off low bits in the amount of half of
* all available subslices per slice.
*/
out_sseu->subslice_mask =
~(~0 << (hweight8(out_sseu->subslice_mask) / 2));
out_sseu->slice_mask = 0x1;
}
}
static int
get_sseu_config(struct intel_sseu *out_sseu,
struct intel_engine_cs *engine,
const struct drm_i915_gem_context_param_sseu *drm_sseu)
{
if (drm_sseu->engine.engine_class != engine->uabi_class ||
drm_sseu->engine.engine_instance != engine->uabi_instance)
return -EINVAL;
return i915_gem_user_to_context_sseu(engine->gt, drm_sseu, out_sseu);
}
/*
* OA timestamp frequency = CS timestamp frequency in most platforms. On some
* platforms OA unit ignores the CTC_SHIFT and the 2 timestamps differ. In such
* cases, return the adjusted CS timestamp frequency to the user.
*/
u32 i915_perf_oa_timestamp_frequency(struct drm_i915_private *i915)
{
struct intel_gt *gt = to_gt(i915);
/* Wa_18013179988 */
if (IS_DG2(i915) || IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74))) {
intel_wakeref_t wakeref;
u32 reg, shift;
with_intel_runtime_pm(to_gt(i915)->uncore->rpm, wakeref)
reg = intel_uncore_read(to_gt(i915)->uncore, RPM_CONFIG0);
shift = REG_FIELD_GET(GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK,
reg);
return to_gt(i915)->clock_frequency << (3 - shift);
}
return to_gt(i915)->clock_frequency;
}
/**
* i915_oa_stream_init - validate combined props for OA stream and init
* @stream: An i915 perf stream
* @param: The open parameters passed to `DRM_I915_PERF_OPEN`
* @props: The property state that configures stream (individually validated)
*
* While read_properties_unlocked() validates properties in isolation it
* doesn't ensure that the combination necessarily makes sense.
*
* At this point it has been determined that userspace wants a stream of
* OA metrics, but still we need to further validate the combined
* properties are OK.
*
* If the configuration makes sense then we can allocate memory for
* a circular OA buffer and apply the requested metric set configuration.
*
* Returns: zero on success or a negative error code.
*/
static int i915_oa_stream_init(struct i915_perf_stream *stream,
struct drm_i915_perf_open_param *param,
struct perf_open_properties *props)
{
struct drm_i915_private *i915 = stream->perf->i915;
struct i915_perf *perf = stream->perf;
struct i915_perf_group *g;
int ret;
if (!props->engine) {
drm_dbg(&stream->perf->i915->drm,
"OA engine not specified\n");
return -EINVAL;
}
g = props->engine->oa_group;
/*
* If the sysfs metrics/ directory wasn't registered for some
* reason then don't let userspace try their luck with config
* IDs
*/
if (!perf->metrics_kobj) {
drm_dbg(&stream->perf->i915->drm,
"OA metrics weren't advertised via sysfs\n");
return -EINVAL;
}
if (!(props->sample_flags & SAMPLE_OA_REPORT) &&
(GRAPHICS_VER(perf->i915) < 12 || !stream->ctx)) {
drm_dbg(&stream->perf->i915->drm,
"Only OA report sampling supported\n");
return -EINVAL;
}
if (!perf->ops.enable_metric_set) {
drm_dbg(&stream->perf->i915->drm,
"OA unit not supported\n");
return -ENODEV;
}
/*
* To avoid the complexity of having to accurately filter
* counter reports and marshal to the appropriate client
* we currently only allow exclusive access
*/
if (g->exclusive_stream) {
drm_dbg(&stream->perf->i915->drm,
"OA unit already in use\n");
return -EBUSY;
}
if (!props->oa_format) {
drm_dbg(&stream->perf->i915->drm,
"OA report format not specified\n");
return -EINVAL;
}
stream->engine = props->engine;
stream->uncore = stream->engine->gt->uncore;
stream->sample_size = sizeof(struct drm_i915_perf_record_header);
stream->oa_buffer.format = &perf->oa_formats[props->oa_format];
if (drm_WARN_ON(&i915->drm, stream->oa_buffer.format->size == 0))
return -EINVAL;
stream->sample_flags = props->sample_flags;
stream->sample_size += stream->oa_buffer.format->size;
stream->hold_preemption = props->hold_preemption;
stream->periodic = props->oa_periodic;
if (stream->periodic)
stream->period_exponent = props->oa_period_exponent;
if (stream->ctx) {
ret = oa_get_render_ctx_id(stream);
if (ret) {
drm_dbg(&stream->perf->i915->drm,
"Invalid context id to filter with\n");
return ret;
}
}
ret = alloc_noa_wait(stream);
if (ret) {
drm_dbg(&stream->perf->i915->drm,
"Unable to allocate NOA wait batch buffer\n");
goto err_noa_wait_alloc;
}
stream->oa_config = i915_perf_get_oa_config(perf, props->metrics_set);
if (!stream->oa_config) {
drm_dbg(&stream->perf->i915->drm,
"Invalid OA config id=%i\n", props->metrics_set);
ret = -EINVAL;
goto err_config;
}
/* PRM - observability performance counters:
*
* OACONTROL, performance counter enable, note:
*
* "When this bit is set, in order to have coherent counts,
* RC6 power state and trunk clock gating must be disabled.
* This can be achieved by programming MMIO registers as
* 0xA094=0 and 0xA090[31]=1"
*
* In our case we are expecting that taking pm + FORCEWAKE
* references will effectively disable RC6.
*/
intel_engine_pm_get(stream->engine);
intel_uncore_forcewake_get(stream->uncore, FORCEWAKE_ALL);
ret = alloc_oa_buffer(stream);
if (ret)
goto err_oa_buf_alloc;
stream->ops = &i915_oa_stream_ops;
stream->engine->gt->perf.sseu = props->sseu;
WRITE_ONCE(g->exclusive_stream, stream);
ret = i915_perf_stream_enable_sync(stream);
if (ret) {
drm_dbg(&stream->perf->i915->drm,
"Unable to enable metric set\n");
goto err_enable;
}
drm_dbg(&stream->perf->i915->drm,
"opening stream oa config uuid=%s\n",
stream->oa_config->uuid);
hrtimer_init(&stream->poll_check_timer,
CLOCK_MONOTONIC, HRTIMER_MODE_REL);
stream->poll_check_timer.function = oa_poll_check_timer_cb;
init_waitqueue_head(&stream->poll_wq);
spin_lock_init(&stream->oa_buffer.ptr_lock);
mutex_init(&stream->lock);
return 0;
err_enable:
WRITE_ONCE(g->exclusive_stream, NULL);
perf->ops.disable_metric_set(stream);
free_oa_buffer(stream);
err_oa_buf_alloc:
intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
intel_engine_pm_put(stream->engine);
free_oa_configs(stream);
err_config:
free_noa_wait(stream);
err_noa_wait_alloc:
if (stream->ctx)
oa_put_render_ctx_id(stream);
return ret;
}
void i915_oa_init_reg_state(const struct intel_context *ce,
const struct intel_engine_cs *engine)
{
struct i915_perf_stream *stream;
if (engine->class != RENDER_CLASS)
return;
/* perf.exclusive_stream serialised by lrc_configure_all_contexts() */
stream = READ_ONCE(engine->oa_group->exclusive_stream);
if (stream && GRAPHICS_VER(stream->perf->i915) < 12)
gen8_update_reg_state_unlocked(ce, stream);
}
/**
* i915_perf_read - handles read() FOP for i915 perf stream FDs
* @file: An i915 perf stream file
* @buf: destination buffer given by userspace
* @count: the number of bytes userspace wants to read
* @ppos: (inout) file seek position (unused)
*
* The entry point for handling a read() on a stream file descriptor from
* userspace. Most of the work is left to the i915_perf_read_locked() and
* &i915_perf_stream_ops->read but to save having stream implementations (of
* which we might have multiple later) we handle blocking read here.
*
* We can also consistently treat trying to read from a disabled stream
* as an IO error so implementations can assume the stream is enabled
* while reading.
*
* Returns: The number of bytes copied or a negative error code on failure.
*/
static ssize_t i915_perf_read(struct file *file,
char __user *buf,
size_t count,
loff_t *ppos)
{
struct i915_perf_stream *stream = file->private_data;
size_t offset = 0;
int ret;
/* To ensure it's handled consistently we simply treat all reads of a
* disabled stream as an error. In particular it might otherwise lead
* to a deadlock for blocking file descriptors...
*/
if (!stream->enabled || !(stream->sample_flags & SAMPLE_OA_REPORT))
return -EIO;
if (!(file->f_flags & O_NONBLOCK)) {
/* There's the small chance of false positives from
* stream->ops->wait_unlocked.
*
* E.g. with single context filtering since we only wait until
* oabuffer has >= 1 report we don't immediately know whether
* any reports really belong to the current context
*/
do {
ret = stream->ops->wait_unlocked(stream);
if (ret)
return ret;
mutex_lock(&stream->lock);
ret = stream->ops->read(stream, buf, count, &offset);
mutex_unlock(&stream->lock);
} while (!offset && !ret);
} else {
mutex_lock(&stream->lock);
ret = stream->ops->read(stream, buf, count, &offset);
mutex_unlock(&stream->lock);
}
/* We allow the poll checking to sometimes report false positive EPOLLIN
* events where we might actually report EAGAIN on read() if there's
* not really any data available. In this situation though we don't
* want to enter a busy loop between poll() reporting a EPOLLIN event
* and read() returning -EAGAIN. Clearing the oa.pollin state here
* effectively ensures we back off until the next hrtimer callback
* before reporting another EPOLLIN event.
* The exception to this is if ops->read() returned -ENOSPC which means
* that more OA data is available than could fit in the user provided
* buffer. In this case we want the next poll() call to not block.
*/
if (ret != -ENOSPC)
stream->pollin = false;
/* Possible values for ret are 0, -EFAULT, -ENOSPC, -EIO, ... */
return offset ?: (ret ?: -EAGAIN);
}
static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)
{
struct i915_perf_stream *stream =
container_of(hrtimer, typeof(*stream), poll_check_timer);
if (oa_buffer_check_unlocked(stream)) {
stream->pollin = true;
wake_up(&stream->poll_wq);
}
hrtimer_forward_now(hrtimer,
ns_to_ktime(stream->poll_oa_period));
return HRTIMER_RESTART;
}
/**
* i915_perf_poll_locked - poll_wait() with a suitable wait queue for stream
* @stream: An i915 perf stream
* @file: An i915 perf stream file
* @wait: poll() state table
*
* For handling userspace polling on an i915 perf stream, this calls through to
* &i915_perf_stream_ops->poll_wait to call poll_wait() with a wait queue that
* will be woken for new stream data.
*
* Returns: any poll events that are ready without sleeping
*/
static __poll_t i915_perf_poll_locked(struct i915_perf_stream *stream,
struct file *file,
poll_table *wait)
{
__poll_t events = 0;
stream->ops->poll_wait(stream, file, wait);
/* Note: we don't explicitly check whether there's something to read
* here since this path may be very hot depending on what else
* userspace is polling, or on the timeout in use. We rely solely on
* the hrtimer/oa_poll_check_timer_cb to notify us when there are
* samples to read.
*/
if (stream->pollin)
events |= EPOLLIN;
return events;
}
/**
* i915_perf_poll - call poll_wait() with a suitable wait queue for stream
* @file: An i915 perf stream file
* @wait: poll() state table
*
* For handling userspace polling on an i915 perf stream, this ensures
* poll_wait() gets called with a wait queue that will be woken for new stream
* data.
*
* Note: Implementation deferred to i915_perf_poll_locked()
*
* Returns: any poll events that are ready without sleeping
*/
static __poll_t i915_perf_poll(struct file *file, poll_table *wait)
{
struct i915_perf_stream *stream = file->private_data;
__poll_t ret;
mutex_lock(&stream->lock);
ret = i915_perf_poll_locked(stream, file, wait);
mutex_unlock(&stream->lock);
return ret;
}
/**
* i915_perf_enable_locked - handle `I915_PERF_IOCTL_ENABLE` ioctl
* @stream: A disabled i915 perf stream
*
* [Re]enables the associated capture of data for this stream.
*
* If a stream was previously enabled then there's currently no intention
* to provide userspace any guarantee about the preservation of previously
* buffered data.
*/
static void i915_perf_enable_locked(struct i915_perf_stream *stream)
{
if (stream->enabled)
return;
/* Allow stream->ops->enable() to refer to this */
stream->enabled = true;
if (stream->ops->enable)
stream->ops->enable(stream);
if (stream->hold_preemption)
intel_context_set_nopreempt(stream->pinned_ctx);
}
/**
* i915_perf_disable_locked - handle `I915_PERF_IOCTL_DISABLE` ioctl
* @stream: An enabled i915 perf stream
*
* Disables the associated capture of data for this stream.
*
* The intention is that disabling an re-enabling a stream will ideally be
* cheaper than destroying and re-opening a stream with the same configuration,
* though there are no formal guarantees about what state or buffered data
* must be retained between disabling and re-enabling a stream.
*
* Note: while a stream is disabled it's considered an error for userspace
* to attempt to read from the stream (-EIO).
*/
static void i915_perf_disable_locked(struct i915_perf_stream *stream)
{
if (!stream->enabled)
return;
/* Allow stream->ops->disable() to refer to this */
stream->enabled = false;
if (stream->hold_preemption)
intel_context_clear_nopreempt(stream->pinned_ctx);
if (stream->ops->disable)
stream->ops->disable(stream);
}
static long i915_perf_config_locked(struct i915_perf_stream *stream,
unsigned long metrics_set)
{
struct i915_oa_config *config;
long ret = stream->oa_config->id;
config = i915_perf_get_oa_config(stream->perf, metrics_set);
if (!config)
return -EINVAL;
if (config != stream->oa_config) {
int err;
/*
* If OA is bound to a specific context, emit the
* reconfiguration inline from that context. The update
* will then be ordered with respect to submission on that
* context.
*
* When set globally, we use a low priority kernel context,
* so it will effectively take effect when idle.
*/
err = emit_oa_config(stream, config, oa_context(stream), NULL);
if (!err)
config = xchg(&stream->oa_config, config);
else
ret = err;
}
i915_oa_config_put(config);
return ret;
}
/**
* i915_perf_ioctl_locked - support ioctl() usage with i915 perf stream FDs
* @stream: An i915 perf stream
* @cmd: the ioctl request
* @arg: the ioctl data
*
* Returns: zero on success or a negative error code. Returns -EINVAL for
* an unknown ioctl request.
*/
static long i915_perf_ioctl_locked(struct i915_perf_stream *stream,
unsigned int cmd,
unsigned long arg)
{
switch (cmd) {
case I915_PERF_IOCTL_ENABLE:
i915_perf_enable_locked(stream);
return 0;
case I915_PERF_IOCTL_DISABLE:
i915_perf_disable_locked(stream);
return 0;
case I915_PERF_IOCTL_CONFIG:
return i915_perf_config_locked(stream, arg);
}
return -EINVAL;
}
/**
* i915_perf_ioctl - support ioctl() usage with i915 perf stream FDs
* @file: An i915 perf stream file
* @cmd: the ioctl request
* @arg: the ioctl data
*
* Implementation deferred to i915_perf_ioctl_locked().
*
* Returns: zero on success or a negative error code. Returns -EINVAL for
* an unknown ioctl request.
*/
static long i915_perf_ioctl(struct file *file,
unsigned int cmd,
unsigned long arg)
{
struct i915_perf_stream *stream = file->private_data;
long ret;
mutex_lock(&stream->lock);
ret = i915_perf_ioctl_locked(stream, cmd, arg);
mutex_unlock(&stream->lock);
return ret;
}
/**
* i915_perf_destroy_locked - destroy an i915 perf stream
* @stream: An i915 perf stream
*
* Frees all resources associated with the given i915 perf @stream, disabling
* any associated data capture in the process.
*
* Note: The &gt->perf.lock mutex has been taken to serialize
* with any non-file-operation driver hooks.
*/
static void i915_perf_destroy_locked(struct i915_perf_stream *stream)
{
if (stream->enabled)
i915_perf_disable_locked(stream);
if (stream->ops->destroy)
stream->ops->destroy(stream);
if (stream->ctx)
i915_gem_context_put(stream->ctx);
kfree(stream);
}
/**
* i915_perf_release - handles userspace close() of a stream file
* @inode: anonymous inode associated with file
* @file: An i915 perf stream file
*
* Cleans up any resources associated with an open i915 perf stream file.
*
* NB: close() can't really fail from the userspace point of view.
*
* Returns: zero on success or a negative error code.
*/
static int i915_perf_release(struct inode *inode, struct file *file)
{
struct i915_perf_stream *stream = file->private_data;
struct i915_perf *perf = stream->perf;
struct intel_gt *gt = stream->engine->gt;
/*
* Within this call, we know that the fd is being closed and we have no
* other user of stream->lock. Use the perf lock to destroy the stream
* here.
*/
mutex_lock(&gt->perf.lock);
i915_perf_destroy_locked(stream);
mutex_unlock(&gt->perf.lock);
/* Release the reference the perf stream kept on the driver. */
drm_dev_put(&perf->i915->drm);
return 0;
}
static const struct file_operations fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.release = i915_perf_release,
.poll = i915_perf_poll,
.read = i915_perf_read,
.unlocked_ioctl = i915_perf_ioctl,
/* Our ioctl have no arguments, so it's safe to use the same function
* to handle 32bits compatibility.
*/
.compat_ioctl = i915_perf_ioctl,
};
/**
* i915_perf_open_ioctl_locked - DRM ioctl() for userspace to open a stream FD
* @perf: i915 perf instance
* @param: The open parameters passed to 'DRM_I915_PERF_OPEN`
* @props: individually validated u64 property value pairs
* @file: drm file
*
* See i915_perf_ioctl_open() for interface details.
*
* Implements further stream config validation and stream initialization on
* behalf of i915_perf_open_ioctl() with the &gt->perf.lock mutex
* taken to serialize with any non-file-operation driver hooks.
*
* Note: at this point the @props have only been validated in isolation and
* it's still necessary to validate that the combination of properties makes
* sense.
*
* In the case where userspace is interested in OA unit metrics then further
* config validation and stream initialization details will be handled by
* i915_oa_stream_init(). The code here should only validate config state that
* will be relevant to all stream types / backends.
*
* Returns: zero on success or a negative error code.
*/
static int
i915_perf_open_ioctl_locked(struct i915_perf *perf,
struct drm_i915_perf_open_param *param,
struct perf_open_properties *props,
struct drm_file *file)
{
struct i915_gem_context *specific_ctx = NULL;
struct i915_perf_stream *stream = NULL;
unsigned long f_flags = 0;
bool privileged_op = true;
int stream_fd;
int ret;
if (props->single_context) {
u32 ctx_handle = props->ctx_handle;
struct drm_i915_file_private *file_priv = file->driver_priv;
specific_ctx = i915_gem_context_lookup(file_priv, ctx_handle);
if (IS_ERR(specific_ctx)) {
drm_dbg(&perf->i915->drm,
"Failed to look up context with ID %u for opening perf stream\n",
ctx_handle);
ret = PTR_ERR(specific_ctx);
goto err;
}
}
/*
* On Haswell the OA unit supports clock gating off for a specific
* context and in this mode there's no visibility of metrics for the
* rest of the system, which we consider acceptable for a
* non-privileged client.
*
* For Gen8->11 the OA unit no longer supports clock gating off for a
* specific context and the kernel can't securely stop the counters
* from updating as system-wide / global values. Even though we can
* filter reports based on the included context ID we can't block
* clients from seeing the raw / global counter values via
* MI_REPORT_PERF_COUNT commands and so consider it a privileged op to
* enable the OA unit by default.
*
* For Gen12+ we gain a new OAR unit that only monitors the RCS on a
* per context basis. So we can relax requirements there if the user
* doesn't request global stream access (i.e. query based sampling
* using MI_RECORD_PERF_COUNT.
*/
if (IS_HASWELL(perf->i915) && specific_ctx)
privileged_op = false;
else if (GRAPHICS_VER(perf->i915) == 12 && specific_ctx &&
(props->sample_flags & SAMPLE_OA_REPORT) == 0)
privileged_op = false;
if (props->hold_preemption) {
if (!props->single_context) {
drm_dbg(&perf->i915->drm,
"preemption disable with no context\n");
ret = -EINVAL;
goto err;
}
privileged_op = true;
}
/*
* Asking for SSEU configuration is a priviliged operation.
*/
if (props->has_sseu)
privileged_op = true;
else
get_default_sseu_config(&props->sseu, props->engine);
/* Similar to perf's kernel.perf_paranoid_cpu sysctl option
* we check a dev.i915.perf_stream_paranoid sysctl option
* to determine if it's ok to access system wide OA counters
* without CAP_PERFMON or CAP_SYS_ADMIN privileges.
*/
if (privileged_op &&
i915_perf_stream_paranoid && !perfmon_capable()) {
drm_dbg(&perf->i915->drm,
"Insufficient privileges to open i915 perf stream\n");
ret = -EACCES;
goto err_ctx;
}
stream = kzalloc(sizeof(*stream), GFP_KERNEL);
if (!stream) {
ret = -ENOMEM;
goto err_ctx;
}
stream->perf = perf;
stream->ctx = specific_ctx;
stream->poll_oa_period = props->poll_oa_period;
ret = i915_oa_stream_init(stream, param, props);
if (ret)
goto err_alloc;
/* we avoid simply assigning stream->sample_flags = props->sample_flags
* to have _stream_init check the combination of sample flags more
* thoroughly, but still this is the expected result at this point.
*/
if (WARN_ON(stream->sample_flags != props->sample_flags)) {
ret = -ENODEV;
goto err_flags;
}
if (param->flags & I915_PERF_FLAG_FD_CLOEXEC)
f_flags |= O_CLOEXEC;
if (param->flags & I915_PERF_FLAG_FD_NONBLOCK)
f_flags |= O_NONBLOCK;
stream_fd = anon_inode_getfd("[i915_perf]", &fops, stream, f_flags);
if (stream_fd < 0) {
ret = stream_fd;
goto err_flags;
}
if (!(param->flags & I915_PERF_FLAG_DISABLED))
i915_perf_enable_locked(stream);
/* Take a reference on the driver that will be kept with stream_fd
* until its release.
*/
drm_dev_get(&perf->i915->drm);
return stream_fd;
err_flags:
if (stream->ops->destroy)
stream->ops->destroy(stream);
err_alloc:
kfree(stream);
err_ctx:
if (specific_ctx)
i915_gem_context_put(specific_ctx);
err:
return ret;
}
static u64 oa_exponent_to_ns(struct i915_perf *perf, int exponent)
{
u64 nom = (2ULL << exponent) * NSEC_PER_SEC;
u32 den = i915_perf_oa_timestamp_frequency(perf->i915);
return div_u64(nom + den - 1, den);
}
static __always_inline bool
oa_format_valid(struct i915_perf *perf, enum drm_i915_oa_format format)
{
return test_bit(format, perf->format_mask);
}
static __always_inline void
oa_format_add(struct i915_perf *perf, enum drm_i915_oa_format format)
{
__set_bit(format, perf->format_mask);
}
/**
* read_properties_unlocked - validate + copy userspace stream open properties
* @perf: i915 perf instance
* @uprops: The array of u64 key value pairs given by userspace
* @n_props: The number of key value pairs expected in @uprops
* @props: The stream configuration built up while validating properties
*
* Note this function only validates properties in isolation it doesn't
* validate that the combination of properties makes sense or that all
* properties necessary for a particular kind of stream have been set.
*
* Note that there currently aren't any ordering requirements for properties so
* we shouldn't validate or assume anything about ordering here. This doesn't
* rule out defining new properties with ordering requirements in the future.
*/
static int read_properties_unlocked(struct i915_perf *perf,
u64 __user *uprops,
u32 n_props,
struct perf_open_properties *props)
{
struct drm_i915_gem_context_param_sseu user_sseu;
const struct i915_oa_format *f;
u64 __user *uprop = uprops;
bool config_instance = false;
bool config_class = false;
bool config_sseu = false;
u8 class, instance;
u32 i;
int ret;
memset(props, 0, sizeof(struct perf_open_properties));
props->poll_oa_period = DEFAULT_POLL_PERIOD_NS;
/* Considering that ID = 0 is reserved and assuming that we don't
* (currently) expect any configurations to ever specify duplicate
* values for a particular property ID then the last _PROP_MAX value is
* one greater than the maximum number of properties we expect to get
* from userspace.
*/
if (!n_props || n_props >= DRM_I915_PERF_PROP_MAX) {
drm_dbg(&perf->i915->drm,
"Invalid number of i915 perf properties given\n");
return -EINVAL;
}
/* Defaults when class:instance is not passed */
class = I915_ENGINE_CLASS_RENDER;
instance = 0;
for (i = 0; i < n_props; i++) {
u64 oa_period, oa_freq_hz;
u64 id, value;
ret = get_user(id, uprop);
if (ret)
return ret;
ret = get_user(value, uprop + 1);
if (ret)
return ret;
if (id == 0 || id >= DRM_I915_PERF_PROP_MAX) {
drm_dbg(&perf->i915->drm,
"Unknown i915 perf property ID\n");
return -EINVAL;
}
switch ((enum drm_i915_perf_property_id)id) {
case DRM_I915_PERF_PROP_CTX_HANDLE:
props->single_context = 1;
props->ctx_handle = value;
break;
case DRM_I915_PERF_PROP_SAMPLE_OA:
if (value)
props->sample_flags |= SAMPLE_OA_REPORT;
break;
case DRM_I915_PERF_PROP_OA_METRICS_SET:
if (value == 0) {
drm_dbg(&perf->i915->drm,
"Unknown OA metric set ID\n");
return -EINVAL;
}
props->metrics_set = value;
break;
case DRM_I915_PERF_PROP_OA_FORMAT:
if (value == 0 || value >= I915_OA_FORMAT_MAX) {
drm_dbg(&perf->i915->drm,
"Out-of-range OA report format %llu\n",
value);
return -EINVAL;
}
if (!oa_format_valid(perf, value)) {
drm_dbg(&perf->i915->drm,
"Unsupported OA report format %llu\n",
value);
return -EINVAL;
}
props->oa_format = value;
break;
case DRM_I915_PERF_PROP_OA_EXPONENT:
if (value > OA_EXPONENT_MAX) {
drm_dbg(&perf->i915->drm,
"OA timer exponent too high (> %u)\n",
OA_EXPONENT_MAX);
return -EINVAL;
}
/* Theoretically we can program the OA unit to sample
* e.g. every 160ns for HSW, 167ns for BDW/SKL or 104ns
* for BXT. We don't allow such high sampling
* frequencies by default unless root.
*/
BUILD_BUG_ON(sizeof(oa_period) != 8);
oa_period = oa_exponent_to_ns(perf, value);
/* This check is primarily to ensure that oa_period <=
* UINT32_MAX (before passing to do_div which only
* accepts a u32 denominator), but we can also skip
* checking anything < 1Hz which implicitly can't be
* limited via an integer oa_max_sample_rate.
*/
if (oa_period <= NSEC_PER_SEC) {
u64 tmp = NSEC_PER_SEC;
do_div(tmp, oa_period);
oa_freq_hz = tmp;
} else
oa_freq_hz = 0;
if (oa_freq_hz > i915_oa_max_sample_rate && !perfmon_capable()) {
drm_dbg(&perf->i915->drm,
"OA exponent would exceed the max sampling frequency (sysctl dev.i915.oa_max_sample_rate) %uHz without CAP_PERFMON or CAP_SYS_ADMIN privileges\n",
i915_oa_max_sample_rate);
return -EACCES;
}
props->oa_periodic = true;
props->oa_period_exponent = value;
break;
case DRM_I915_PERF_PROP_HOLD_PREEMPTION:
props->hold_preemption = !!value;
break;
case DRM_I915_PERF_PROP_GLOBAL_SSEU: {
if (GRAPHICS_VER_FULL(perf->i915) >= IP_VER(12, 50)) {
drm_dbg(&perf->i915->drm,
"SSEU config not supported on gfx %x\n",
GRAPHICS_VER_FULL(perf->i915));
return -ENODEV;
}
if (copy_from_user(&user_sseu,
u64_to_user_ptr(value),
sizeof(user_sseu))) {
drm_dbg(&perf->i915->drm,
"Unable to copy global sseu parameter\n");
return -EFAULT;
}
config_sseu = true;
break;
}
case DRM_I915_PERF_PROP_POLL_OA_PERIOD:
if (value < 100000 /* 100us */) {
drm_dbg(&perf->i915->drm,
"OA availability timer too small (%lluns < 100us)\n",
value);
return -EINVAL;
}
props->poll_oa_period = value;
break;
case DRM_I915_PERF_PROP_OA_ENGINE_CLASS:
class = (u8)value;
config_class = true;
break;
case DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE:
instance = (u8)value;
config_instance = true;
break;
default:
MISSING_CASE(id);
return -EINVAL;
}
uprop += 2;
}
if ((config_class && !config_instance) ||
(config_instance && !config_class)) {
drm_dbg(&perf->i915->drm,
"OA engine-class and engine-instance parameters must be passed together\n");
return -EINVAL;
}
props->engine = intel_engine_lookup_user(perf->i915, class, instance);
if (!props->engine) {
drm_dbg(&perf->i915->drm,
"OA engine class and instance invalid %d:%d\n",
class, instance);
return -EINVAL;
}
if (!engine_supports_oa(props->engine)) {
drm_dbg(&perf->i915->drm,
"Engine not supported by OA %d:%d\n",
class, instance);
return -EINVAL;
}
/*
* Wa_14017512683: mtl[a0..c0): Use of OAM must be preceded with Media
* C6 disable in BIOS. Fail if Media C6 is enabled on steppings where OAM
* does not work as expected.
*/
if (IS_MEDIA_GT_IP_STEP(props->engine->gt, IP_VER(13, 0), STEP_A0, STEP_C0) &&
props->engine->oa_group->type == TYPE_OAM &&
intel_check_bios_c6_setup(&props->engine->gt->rc6)) {
drm_dbg(&perf->i915->drm,
"OAM requires media C6 to be disabled in BIOS\n");
return -EINVAL;
}
i = array_index_nospec(props->oa_format, I915_OA_FORMAT_MAX);
f = &perf->oa_formats[i];
if (!engine_supports_oa_format(props->engine, f->type)) {
drm_dbg(&perf->i915->drm,
"Invalid OA format %d for class %d\n",
f->type, props->engine->class);
return -EINVAL;
}
if (config_sseu) {
ret = get_sseu_config(&props->sseu, props->engine, &user_sseu);
if (ret) {
drm_dbg(&perf->i915->drm,
"Invalid SSEU configuration\n");
return ret;
}
props->has_sseu = true;
}
return 0;
}
/**
* i915_perf_open_ioctl - DRM ioctl() for userspace to open a stream FD
* @dev: drm device
* @data: ioctl data copied from userspace (unvalidated)
* @file: drm file
*
* Validates the stream open parameters given by userspace including flags
* and an array of u64 key, value pair properties.
*
* Very little is assumed up front about the nature of the stream being
* opened (for instance we don't assume it's for periodic OA unit metrics). An
* i915-perf stream is expected to be a suitable interface for other forms of
* buffered data written by the GPU besides periodic OA metrics.
*
* Note we copy the properties from userspace outside of the i915 perf
* mutex to avoid an awkward lockdep with mmap_lock.
*
* Most of the implementation details are handled by
* i915_perf_open_ioctl_locked() after taking the &gt->perf.lock
* mutex for serializing with any non-file-operation driver hooks.
*
* Return: A newly opened i915 Perf stream file descriptor or negative
* error code on failure.
*/
int i915_perf_open_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct i915_perf *perf = &to_i915(dev)->perf;
struct drm_i915_perf_open_param *param = data;
struct intel_gt *gt;
struct perf_open_properties props;
u32 known_open_flags;
int ret;
if (!perf->i915)
return -ENOTSUPP;
known_open_flags = I915_PERF_FLAG_FD_CLOEXEC |
I915_PERF_FLAG_FD_NONBLOCK |
I915_PERF_FLAG_DISABLED;
if (param->flags & ~known_open_flags) {
drm_dbg(&perf->i915->drm,
"Unknown drm_i915_perf_open_param flag\n");
return -EINVAL;
}
ret = read_properties_unlocked(perf,
u64_to_user_ptr(param->properties_ptr),
param->num_properties,
&props);
if (ret)
return ret;
gt = props.engine->gt;
mutex_lock(&gt->perf.lock);
ret = i915_perf_open_ioctl_locked(perf, param, &props, file);
mutex_unlock(&gt->perf.lock);
return ret;
}
/**
* i915_perf_register - exposes i915-perf to userspace
* @i915: i915 device instance
*
* In particular OA metric sets are advertised under a sysfs metrics/
* directory allowing userspace to enumerate valid IDs that can be
* used to open an i915-perf stream.
*/
void i915_perf_register(struct drm_i915_private *i915)
{
struct i915_perf *perf = &i915->perf;
struct intel_gt *gt = to_gt(i915);
if (!perf->i915)
return;
/* To be sure we're synchronized with an attempted
* i915_perf_open_ioctl(); considering that we register after
* being exposed to userspace.
*/
mutex_lock(&gt->perf.lock);
perf->metrics_kobj =
kobject_create_and_add("metrics",
&i915->drm.primary->kdev->kobj);
mutex_unlock(&gt->perf.lock);
}
/**
* i915_perf_unregister - hide i915-perf from userspace
* @i915: i915 device instance
*
* i915-perf state cleanup is split up into an 'unregister' and
* 'deinit' phase where the interface is first hidden from
* userspace by i915_perf_unregister() before cleaning up
* remaining state in i915_perf_fini().
*/
void i915_perf_unregister(struct drm_i915_private *i915)
{
struct i915_perf *perf = &i915->perf;
if (!perf->metrics_kobj)
return;
kobject_put(perf->metrics_kobj);
perf->metrics_kobj = NULL;
}
static bool gen8_is_valid_flex_addr(struct i915_perf *perf, u32 addr)
{
static const i915_reg_t flex_eu_regs[] = {
EU_PERF_CNTL0,
EU_PERF_CNTL1,
EU_PERF_CNTL2,
EU_PERF_CNTL3,
EU_PERF_CNTL4,
EU_PERF_CNTL5,
EU_PERF_CNTL6,
};
int i;
for (i = 0; i < ARRAY_SIZE(flex_eu_regs); i++) {
if (i915_mmio_reg_offset(flex_eu_regs[i]) == addr)
return true;
}
return false;
}
static bool reg_in_range_table(u32 addr, const struct i915_range *table)
{
while (table->start || table->end) {
if (addr >= table->start && addr <= table->end)
return true;
table++;
}
return false;
}
#define REG_EQUAL(addr, mmio) \
((addr) == i915_mmio_reg_offset(mmio))
static const struct i915_range gen7_oa_b_counters[] = {
{ .start = 0x2710, .end = 0x272c }, /* OASTARTTRIG[1-8] */
{ .start = 0x2740, .end = 0x275c }, /* OAREPORTTRIG[1-8] */
{ .start = 0x2770, .end = 0x27ac }, /* OACEC[0-7][0-1] */
{}
};
static const struct i915_range gen12_oa_b_counters[] = {
{ .start = 0x2b2c, .end = 0x2b2c }, /* GEN12_OAG_OA_PESS */
{ .start = 0xd900, .end = 0xd91c }, /* GEN12_OAG_OASTARTTRIG[1-8] */
{ .start = 0xd920, .end = 0xd93c }, /* GEN12_OAG_OAREPORTTRIG1[1-8] */
{ .start = 0xd940, .end = 0xd97c }, /* GEN12_OAG_CEC[0-7][0-1] */
{ .start = 0xdc00, .end = 0xdc3c }, /* GEN12_OAG_SCEC[0-7][0-1] */
{ .start = 0xdc40, .end = 0xdc40 }, /* GEN12_OAG_SPCTR_CNF */
{ .start = 0xdc44, .end = 0xdc44 }, /* GEN12_OAA_DBG_REG */
{}
};
static const struct i915_range mtl_oam_b_counters[] = {
{ .start = 0x393000, .end = 0x39301c }, /* GEN12_OAM_STARTTRIG1[1-8] */
{ .start = 0x393020, .end = 0x39303c }, /* GEN12_OAM_REPORTTRIG1[1-8] */
{ .start = 0x393040, .end = 0x39307c }, /* GEN12_OAM_CEC[0-7][0-1] */
{ .start = 0x393200, .end = 0x39323C }, /* MPES[0-7] */
{}
};
static const struct i915_range xehp_oa_b_counters[] = {
{ .start = 0xdc48, .end = 0xdc48 }, /* OAA_ENABLE_REG */
{ .start = 0xdd00, .end = 0xdd48 }, /* OAG_LCE0_0 - OAA_LENABLE_REG */
{}
};
static const struct i915_range gen7_oa_mux_regs[] = {
{ .start = 0x91b8, .end = 0x91cc }, /* OA_PERFCNT[1-2], OA_PERFMATRIX */
{ .start = 0x9800, .end = 0x9888 }, /* MICRO_BP0_0 - NOA_WRITE */
{ .start = 0xe180, .end = 0xe180 }, /* HALF_SLICE_CHICKEN2 */
{}
};
static const struct i915_range hsw_oa_mux_regs[] = {
{ .start = 0x09e80, .end = 0x09ea4 }, /* HSW_MBVID2_NOA[0-9] */
{ .start = 0x09ec0, .end = 0x09ec0 }, /* HSW_MBVID2_MISR0 */
{ .start = 0x25100, .end = 0x2ff90 },
{}
};
static const struct i915_range chv_oa_mux_regs[] = {
{ .start = 0x182300, .end = 0x1823a4 },
{}
};
static const struct i915_range gen8_oa_mux_regs[] = {
{ .start = 0x0d00, .end = 0x0d2c }, /* RPM_CONFIG[0-1], NOA_CONFIG[0-8] */
{ .start = 0x20cc, .end = 0x20cc }, /* WAIT_FOR_RC6_EXIT */
{}
};
static const struct i915_range gen11_oa_mux_regs[] = {
{ .start = 0x91c8, .end = 0x91dc }, /* OA_PERFCNT[3-4] */
{}
};
static const struct i915_range gen12_oa_mux_regs[] = {
{ .start = 0x0d00, .end = 0x0d04 }, /* RPM_CONFIG[0-1] */
{ .start = 0x0d0c, .end = 0x0d2c }, /* NOA_CONFIG[0-8] */
{ .start = 0x9840, .end = 0x9840 }, /* GDT_CHICKEN_BITS */
{ .start = 0x9884, .end = 0x9888 }, /* NOA_WRITE */
{ .start = 0x20cc, .end = 0x20cc }, /* WAIT_FOR_RC6_EXIT */
{}
};
/*
* Ref: 14010536224:
* 0x20cc is repurposed on MTL, so use a separate array for MTL.
*/
static const struct i915_range mtl_oa_mux_regs[] = {
{ .start = 0x0d00, .end = 0x0d04 }, /* RPM_CONFIG[0-1] */
{ .start = 0x0d0c, .end = 0x0d2c }, /* NOA_CONFIG[0-8] */
{ .start = 0x9840, .end = 0x9840 }, /* GDT_CHICKEN_BITS */
{ .start = 0x9884, .end = 0x9888 }, /* NOA_WRITE */
{ .start = 0x38d100, .end = 0x38d114}, /* VISACTL */
{}
};
static bool gen7_is_valid_b_counter_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen7_oa_b_counters);
}
static bool gen8_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen7_oa_mux_regs) ||
reg_in_range_table(addr, gen8_oa_mux_regs);
}
static bool gen11_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen7_oa_mux_regs) ||
reg_in_range_table(addr, gen8_oa_mux_regs) ||
reg_in_range_table(addr, gen11_oa_mux_regs);
}
static bool hsw_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen7_oa_mux_regs) ||
reg_in_range_table(addr, hsw_oa_mux_regs);
}
static bool chv_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen7_oa_mux_regs) ||
reg_in_range_table(addr, chv_oa_mux_regs);
}
static bool gen12_is_valid_b_counter_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, gen12_oa_b_counters);
}
static bool mtl_is_valid_oam_b_counter_addr(struct i915_perf *perf, u32 addr)
{
if (HAS_OAM(perf->i915) &&
GRAPHICS_VER_FULL(perf->i915) >= IP_VER(12, 70))
return reg_in_range_table(addr, mtl_oam_b_counters);
return false;
}
static bool xehp_is_valid_b_counter_addr(struct i915_perf *perf, u32 addr)
{
return reg_in_range_table(addr, xehp_oa_b_counters) ||
reg_in_range_table(addr, gen12_oa_b_counters) ||
mtl_is_valid_oam_b_counter_addr(perf, addr);
}
static bool gen12_is_valid_mux_addr(struct i915_perf *perf, u32 addr)
{
if (GRAPHICS_VER_FULL(perf->i915) >= IP_VER(12, 70))
return reg_in_range_table(addr, mtl_oa_mux_regs);
else
return reg_in_range_table(addr, gen12_oa_mux_regs);
}
static u32 mask_reg_value(u32 reg, u32 val)
{
/* HALF_SLICE_CHICKEN2 is programmed with a the
* WaDisableSTUnitPowerOptimization workaround. Make sure the value
* programmed by userspace doesn't change this.
*/
if (REG_EQUAL(reg, HALF_SLICE_CHICKEN2))
val = val & ~_MASKED_BIT_ENABLE(GEN8_ST_PO_DISABLE);
/* WAIT_FOR_RC6_EXIT has only one bit fullfilling the function
* indicated by its name and a bunch of selection fields used by OA
* configs.
*/
if (REG_EQUAL(reg, WAIT_FOR_RC6_EXIT))
val = val & ~_MASKED_BIT_ENABLE(HSW_WAIT_FOR_RC6_EXIT_ENABLE);
return val;
}
static struct i915_oa_reg *alloc_oa_regs(struct i915_perf *perf,
bool (*is_valid)(struct i915_perf *perf, u32 addr),
u32 __user *regs,
u32 n_regs)
{
struct i915_oa_reg *oa_regs;
int err;
u32 i;
if (!n_regs)
return NULL;
/* No is_valid function means we're not allowing any register to be programmed. */
GEM_BUG_ON(!is_valid);
if (!is_valid)
return ERR_PTR(-EINVAL);
oa_regs = kmalloc_array(n_regs, sizeof(*oa_regs), GFP_KERNEL);
if (!oa_regs)
return ERR_PTR(-ENOMEM);
for (i = 0; i < n_regs; i++) {
u32 addr, value;
err = get_user(addr, regs);
if (err)
goto addr_err;
if (!is_valid(perf, addr)) {
drm_dbg(&perf->i915->drm,
"Invalid oa_reg address: %X\n", addr);
err = -EINVAL;
goto addr_err;
}
err = get_user(value, regs + 1);
if (err)
goto addr_err;
oa_regs[i].addr = _MMIO(addr);
oa_regs[i].value = mask_reg_value(addr, value);
regs += 2;
}
return oa_regs;
addr_err:
kfree(oa_regs);
return ERR_PTR(err);
}
static ssize_t show_dynamic_id(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
struct i915_oa_config *oa_config =
container_of(attr, typeof(*oa_config), sysfs_metric_id);
return sprintf(buf, "%d\n", oa_config->id);
}
static int create_dynamic_oa_sysfs_entry(struct i915_perf *perf,
struct i915_oa_config *oa_config)
{
sysfs_attr_init(&oa_config->sysfs_metric_id.attr);
oa_config->sysfs_metric_id.attr.name = "id";
oa_config->sysfs_metric_id.attr.mode = S_IRUGO;
oa_config->sysfs_metric_id.show = show_dynamic_id;
oa_config->sysfs_metric_id.store = NULL;
oa_config->attrs[0] = &oa_config->sysfs_metric_id.attr;
oa_config->attrs[1] = NULL;
oa_config->sysfs_metric.name = oa_config->uuid;
oa_config->sysfs_metric.attrs = oa_config->attrs;
return sysfs_create_group(perf->metrics_kobj,
&oa_config->sysfs_metric);
}
/**
* i915_perf_add_config_ioctl - DRM ioctl() for userspace to add a new OA config
* @dev: drm device
* @data: ioctl data (pointer to struct drm_i915_perf_oa_config) copied from
* userspace (unvalidated)
* @file: drm file
*
* Validates the submitted OA register to be saved into a new OA config that
* can then be used for programming the OA unit and its NOA network.
*
* Returns: A new allocated config number to be used with the perf open ioctl
* or a negative error code on failure.
*/
int i915_perf_add_config_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct i915_perf *perf = &to_i915(dev)->perf;
struct drm_i915_perf_oa_config *args = data;
struct i915_oa_config *oa_config, *tmp;
struct i915_oa_reg *regs;
int err, id;
if (!perf->i915)
return -ENOTSUPP;
if (!perf->metrics_kobj) {
drm_dbg(&perf->i915->drm,
"OA metrics weren't advertised via sysfs\n");
return -EINVAL;
}
if (i915_perf_stream_paranoid && !perfmon_capable()) {
drm_dbg(&perf->i915->drm,
"Insufficient privileges to add i915 OA config\n");
return -EACCES;
}
if ((!args->mux_regs_ptr || !args->n_mux_regs) &&
(!args->boolean_regs_ptr || !args->n_boolean_regs) &&
(!args->flex_regs_ptr || !args->n_flex_regs)) {
drm_dbg(&perf->i915->drm,
"No OA registers given\n");
return -EINVAL;
}
oa_config = kzalloc(sizeof(*oa_config), GFP_KERNEL);
if (!oa_config) {
drm_dbg(&perf->i915->drm,
"Failed to allocate memory for the OA config\n");
return -ENOMEM;
}
oa_config->perf = perf;
kref_init(&oa_config->ref);
if (!uuid_is_valid(args->uuid)) {
drm_dbg(&perf->i915->drm,
"Invalid uuid format for OA config\n");
err = -EINVAL;
goto reg_err;
}
/* Last character in oa_config->uuid will be 0 because oa_config is
* kzalloc.
*/
memcpy(oa_config->uuid, args->uuid, sizeof(args->uuid));
oa_config->mux_regs_len = args->n_mux_regs;
regs = alloc_oa_regs(perf,
perf->ops.is_valid_mux_reg,
u64_to_user_ptr(args->mux_regs_ptr),
args->n_mux_regs);
if (IS_ERR(regs)) {
drm_dbg(&perf->i915->drm,
"Failed to create OA config for mux_regs\n");
err = PTR_ERR(regs);
goto reg_err;
}
oa_config->mux_regs = regs;
oa_config->b_counter_regs_len = args->n_boolean_regs;
regs = alloc_oa_regs(perf,
perf->ops.is_valid_b_counter_reg,
u64_to_user_ptr(args->boolean_regs_ptr),
args->n_boolean_regs);
if (IS_ERR(regs)) {
drm_dbg(&perf->i915->drm,
"Failed to create OA config for b_counter_regs\n");
err = PTR_ERR(regs);
goto reg_err;
}
oa_config->b_counter_regs = regs;
if (GRAPHICS_VER(perf->i915) < 8) {
if (args->n_flex_regs != 0) {
err = -EINVAL;
goto reg_err;
}
} else {
oa_config->flex_regs_len = args->n_flex_regs;
regs = alloc_oa_regs(perf,
perf->ops.is_valid_flex_reg,
u64_to_user_ptr(args->flex_regs_ptr),
args->n_flex_regs);
if (IS_ERR(regs)) {
drm_dbg(&perf->i915->drm,
"Failed to create OA config for flex_regs\n");
err = PTR_ERR(regs);
goto reg_err;
}
oa_config->flex_regs = regs;
}
err = mutex_lock_interruptible(&perf->metrics_lock);
if (err)
goto reg_err;
/* We shouldn't have too many configs, so this iteration shouldn't be
* too costly.
*/
idr_for_each_entry(&perf->metrics_idr, tmp, id) {
if (!strcmp(tmp->uuid, oa_config->uuid)) {
drm_dbg(&perf->i915->drm,
"OA config already exists with this uuid\n");
err = -EADDRINUSE;
goto sysfs_err;
}
}
err = create_dynamic_oa_sysfs_entry(perf, oa_config);
if (err) {
drm_dbg(&perf->i915->drm,
"Failed to create sysfs entry for OA config\n");
goto sysfs_err;
}
/* Config id 0 is invalid, id 1 for kernel stored test config. */
oa_config->id = idr_alloc(&perf->metrics_idr,
oa_config, 2,
0, GFP_KERNEL);
if (oa_config->id < 0) {
drm_dbg(&perf->i915->drm,
"Failed to create sysfs entry for OA config\n");
err = oa_config->id;
goto sysfs_err;
}
id = oa_config->id;
drm_dbg(&perf->i915->drm,
"Added config %s id=%i\n", oa_config->uuid, oa_config->id);
mutex_unlock(&perf->metrics_lock);
return id;
sysfs_err:
mutex_unlock(&perf->metrics_lock);
reg_err:
i915_oa_config_put(oa_config);
drm_dbg(&perf->i915->drm,
"Failed to add new OA config\n");
return err;
}
/**
* i915_perf_remove_config_ioctl - DRM ioctl() for userspace to remove an OA config
* @dev: drm device
* @data: ioctl data (pointer to u64 integer) copied from userspace
* @file: drm file
*
* Configs can be removed while being used, the will stop appearing in sysfs
* and their content will be freed when the stream using the config is closed.
*
* Returns: 0 on success or a negative error code on failure.
*/
int i915_perf_remove_config_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct i915_perf *perf = &to_i915(dev)->perf;
u64 *arg = data;
struct i915_oa_config *oa_config;
int ret;
if (!perf->i915)
return -ENOTSUPP;
if (i915_perf_stream_paranoid && !perfmon_capable()) {
drm_dbg(&perf->i915->drm,
"Insufficient privileges to remove i915 OA config\n");
return -EACCES;
}
ret = mutex_lock_interruptible(&perf->metrics_lock);
if (ret)
return ret;
oa_config = idr_find(&perf->metrics_idr, *arg);
if (!oa_config) {
drm_dbg(&perf->i915->drm,
"Failed to remove unknown OA config\n");
ret = -ENOENT;
goto err_unlock;
}
GEM_BUG_ON(*arg != oa_config->id);
sysfs_remove_group(perf->metrics_kobj, &oa_config->sysfs_metric);
idr_remove(&perf->metrics_idr, *arg);
mutex_unlock(&perf->metrics_lock);
drm_dbg(&perf->i915->drm,
"Removed config %s id=%i\n", oa_config->uuid, oa_config->id);
i915_oa_config_put(oa_config);
return 0;
err_unlock:
mutex_unlock(&perf->metrics_lock);
return ret;
}
static struct ctl_table oa_table[] = {
{
.procname = "perf_stream_paranoid",
.data = &i915_perf_stream_paranoid,
.maxlen = sizeof(i915_perf_stream_paranoid),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = SYSCTL_ONE,
},
{
.procname = "oa_max_sample_rate",
.data = &i915_oa_max_sample_rate,
.maxlen = sizeof(i915_oa_max_sample_rate),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ZERO,
.extra2 = &oa_sample_rate_hard_limit,
},
};
static u32 num_perf_groups_per_gt(struct intel_gt *gt)
{
return 1;
}
static u32 __oam_engine_group(struct intel_engine_cs *engine)
{
if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70)) {
/*
* There's 1 SAMEDIA gt and 1 OAM per SAMEDIA gt. All media slices
* within the gt use the same OAM. All MTL SKUs list 1 SA MEDIA.
*/
drm_WARN_ON(&engine->i915->drm,
engine->gt->type != GT_MEDIA);
return PERF_GROUP_OAM_SAMEDIA_0;
}
return PERF_GROUP_INVALID;
}
static u32 __oa_engine_group(struct intel_engine_cs *engine)
{
switch (engine->class) {
case RENDER_CLASS:
return PERF_GROUP_OAG;
case VIDEO_DECODE_CLASS:
case VIDEO_ENHANCEMENT_CLASS:
return __oam_engine_group(engine);
default:
return PERF_GROUP_INVALID;
}
}
static struct i915_perf_regs __oam_regs(u32 base)
{
return (struct i915_perf_regs) {
base,
GEN12_OAM_HEAD_POINTER(base),
GEN12_OAM_TAIL_POINTER(base),
GEN12_OAM_BUFFER(base),
GEN12_OAM_CONTEXT_CONTROL(base),
GEN12_OAM_CONTROL(base),
GEN12_OAM_DEBUG(base),
GEN12_OAM_STATUS(base),
GEN12_OAM_CONTROL_COUNTER_FORMAT_SHIFT,
};
}
static struct i915_perf_regs __oag_regs(void)
{
return (struct i915_perf_regs) {
0,
GEN12_OAG_OAHEADPTR,
GEN12_OAG_OATAILPTR,
GEN12_OAG_OABUFFER,
GEN12_OAG_OAGLBCTXCTRL,
GEN12_OAG_OACONTROL,
GEN12_OAG_OA_DEBUG,
GEN12_OAG_OASTATUS,
GEN12_OAG_OACONTROL_OA_COUNTER_FORMAT_SHIFT,
};
}
static void oa_init_groups(struct intel_gt *gt)
{
int i, num_groups = gt->perf.num_perf_groups;
for (i = 0; i < num_groups; i++) {
struct i915_perf_group *g = &gt->perf.group[i];
/* Fused off engines can result in a group with num_engines == 0 */
if (g->num_engines == 0)
continue;
if (i == PERF_GROUP_OAG && gt->type != GT_MEDIA) {
g->regs = __oag_regs();
g->type = TYPE_OAG;
} else if (GRAPHICS_VER_FULL(gt->i915) >= IP_VER(12, 70)) {
g->regs = __oam_regs(mtl_oa_base[i]);
g->type = TYPE_OAM;
}
}
}
static int oa_init_gt(struct intel_gt *gt)
{
u32 num_groups = num_perf_groups_per_gt(gt);
struct intel_engine_cs *engine;
struct i915_perf_group *g;
intel_engine_mask_t tmp;
g = kcalloc(num_groups, sizeof(*g), GFP_KERNEL);
if (!g)
return -ENOMEM;
for_each_engine_masked(engine, gt, ALL_ENGINES, tmp) {
u32 index = __oa_engine_group(engine);
engine->oa_group = NULL;
if (index < num_groups) {
g[index].num_engines++;
engine->oa_group = &g[index];
}
}
gt->perf.num_perf_groups = num_groups;
gt->perf.group = g;
oa_init_groups(gt);
return 0;
}
static int oa_init_engine_groups(struct i915_perf *perf)
{
struct intel_gt *gt;
int i, ret;
for_each_gt(gt, perf->i915, i) {
ret = oa_init_gt(gt);
if (ret)
return ret;
}
return 0;
}
static void oa_init_supported_formats(struct i915_perf *perf)
{
struct drm_i915_private *i915 = perf->i915;
enum intel_platform platform = INTEL_INFO(i915)->platform;
switch (platform) {
case INTEL_HASWELL:
oa_format_add(perf, I915_OA_FORMAT_A13);
oa_format_add(perf, I915_OA_FORMAT_A13);
oa_format_add(perf, I915_OA_FORMAT_A29);
oa_format_add(perf, I915_OA_FORMAT_A13_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_B4_C8);
oa_format_add(perf, I915_OA_FORMAT_A45_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_B4_C8_A16);
oa_format_add(perf, I915_OA_FORMAT_C4_B8);
break;
case INTEL_BROADWELL:
case INTEL_CHERRYVIEW:
case INTEL_SKYLAKE:
case INTEL_BROXTON:
case INTEL_KABYLAKE:
case INTEL_GEMINILAKE:
case INTEL_COFFEELAKE:
case INTEL_COMETLAKE:
case INTEL_ICELAKE:
case INTEL_ELKHARTLAKE:
case INTEL_JASPERLAKE:
case INTEL_TIGERLAKE:
case INTEL_ROCKETLAKE:
case INTEL_DG1:
case INTEL_ALDERLAKE_S:
case INTEL_ALDERLAKE_P:
oa_format_add(perf, I915_OA_FORMAT_A12);
oa_format_add(perf, I915_OA_FORMAT_A12_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_A32u40_A4u32_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_C4_B8);
break;
case INTEL_DG2:
oa_format_add(perf, I915_OAR_FORMAT_A32u40_A4u32_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_A24u40_A14u32_B8_C8);
break;
case INTEL_METEORLAKE:
oa_format_add(perf, I915_OAR_FORMAT_A32u40_A4u32_B8_C8);
oa_format_add(perf, I915_OA_FORMAT_A24u40_A14u32_B8_C8);
oa_format_add(perf, I915_OAM_FORMAT_MPEC8u64_B8_C8);
oa_format_add(perf, I915_OAM_FORMAT_MPEC8u32_B8_C8);
break;
default:
MISSING_CASE(platform);
}
}
static void i915_perf_init_info(struct drm_i915_private *i915)
{
struct i915_perf *perf = &i915->perf;
switch (GRAPHICS_VER(i915)) {
case 8:
perf->ctx_oactxctrl_offset = 0x120;
perf->ctx_flexeu0_offset = 0x2ce;
perf->gen8_valid_ctx_bit = BIT(25);
break;
case 9:
perf->ctx_oactxctrl_offset = 0x128;
perf->ctx_flexeu0_offset = 0x3de;
perf->gen8_valid_ctx_bit = BIT(16);
break;
case 11:
perf->ctx_oactxctrl_offset = 0x124;
perf->ctx_flexeu0_offset = 0x78e;
perf->gen8_valid_ctx_bit = BIT(16);
break;
case 12:
perf->gen8_valid_ctx_bit = BIT(16);
/*
* Calculate offset at runtime in oa_pin_context for gen12 and
* cache the value in perf->ctx_oactxctrl_offset.
*/
break;
default:
MISSING_CASE(GRAPHICS_VER(i915));
}
}
/**
* i915_perf_init - initialize i915-perf state on module bind
* @i915: i915 device instance
*
* Initializes i915-perf state without exposing anything to userspace.
*
* Note: i915-perf initialization is split into an 'init' and 'register'
* phase with the i915_perf_register() exposing state to userspace.
*/
int i915_perf_init(struct drm_i915_private *i915)
{
struct i915_perf *perf = &i915->perf;
perf->oa_formats = oa_formats;
if (IS_HASWELL(i915)) {
perf->ops.is_valid_b_counter_reg = gen7_is_valid_b_counter_addr;
perf->ops.is_valid_mux_reg = hsw_is_valid_mux_addr;
perf->ops.is_valid_flex_reg = NULL;
perf->ops.enable_metric_set = hsw_enable_metric_set;
perf->ops.disable_metric_set = hsw_disable_metric_set;
perf->ops.oa_enable = gen7_oa_enable;
perf->ops.oa_disable = gen7_oa_disable;
perf->ops.read = gen7_oa_read;
perf->ops.oa_hw_tail_read = gen7_oa_hw_tail_read;
} else if (HAS_LOGICAL_RING_CONTEXTS(i915)) {
/* Note: that although we could theoretically also support the
* legacy ringbuffer mode on BDW (and earlier iterations of
* this driver, before upstreaming did this) it didn't seem
* worth the complexity to maintain now that BDW+ enable
* execlist mode by default.
*/
perf->ops.read = gen8_oa_read;
i915_perf_init_info(i915);
if (IS_GRAPHICS_VER(i915, 8, 9)) {
perf->ops.is_valid_b_counter_reg =
gen7_is_valid_b_counter_addr;
perf->ops.is_valid_mux_reg =
gen8_is_valid_mux_addr;
perf->ops.is_valid_flex_reg =
gen8_is_valid_flex_addr;
if (IS_CHERRYVIEW(i915)) {
perf->ops.is_valid_mux_reg =
chv_is_valid_mux_addr;
}
perf->ops.oa_enable = gen8_oa_enable;
perf->ops.oa_disable = gen8_oa_disable;
perf->ops.enable_metric_set = gen8_enable_metric_set;
perf->ops.disable_metric_set = gen8_disable_metric_set;
perf->ops.oa_hw_tail_read = gen8_oa_hw_tail_read;
} else if (GRAPHICS_VER(i915) == 11) {
perf->ops.is_valid_b_counter_reg =
gen7_is_valid_b_counter_addr;
perf->ops.is_valid_mux_reg =
gen11_is_valid_mux_addr;
perf->ops.is_valid_flex_reg =
gen8_is_valid_flex_addr;
perf->ops.oa_enable = gen8_oa_enable;
perf->ops.oa_disable = gen8_oa_disable;
perf->ops.enable_metric_set = gen8_enable_metric_set;
perf->ops.disable_metric_set = gen11_disable_metric_set;
perf->ops.oa_hw_tail_read = gen8_oa_hw_tail_read;
} else if (GRAPHICS_VER(i915) == 12) {
perf->ops.is_valid_b_counter_reg =
HAS_OA_SLICE_CONTRIB_LIMITS(i915) ?
xehp_is_valid_b_counter_addr :
gen12_is_valid_b_counter_addr;
perf->ops.is_valid_mux_reg =
gen12_is_valid_mux_addr;
perf->ops.is_valid_flex_reg =
gen8_is_valid_flex_addr;
perf->ops.oa_enable = gen12_oa_enable;
perf->ops.oa_disable = gen12_oa_disable;
perf->ops.enable_metric_set = gen12_enable_metric_set;
perf->ops.disable_metric_set = gen12_disable_metric_set;
perf->ops.oa_hw_tail_read = gen12_oa_hw_tail_read;
}
}
if (perf->ops.enable_metric_set) {
struct intel_gt *gt;
int i, ret;
for_each_gt(gt, i915, i)
mutex_init(&gt->perf.lock);
/* Choose a representative limit */
oa_sample_rate_hard_limit = to_gt(i915)->clock_frequency / 2;
mutex_init(&perf->metrics_lock);
idr_init_base(&perf->metrics_idr, 1);
/* We set up some ratelimit state to potentially throttle any
* _NOTES about spurious, invalid OA reports which we don't
* forward to userspace.
*
* We print a _NOTE about any throttling when closing the
* stream instead of waiting until driver _fini which no one
* would ever see.
*
* Using the same limiting factors as printk_ratelimit()
*/
ratelimit_state_init(&perf->spurious_report_rs, 5 * HZ, 10);
/* Since we use a DRM_NOTE for spurious reports it would be
* inconsistent to let __ratelimit() automatically print a
* warning for throttling.
*/
ratelimit_set_flags(&perf->spurious_report_rs,
RATELIMIT_MSG_ON_RELEASE);
ratelimit_state_init(&perf->tail_pointer_race,
5 * HZ, 10);
ratelimit_set_flags(&perf->tail_pointer_race,
RATELIMIT_MSG_ON_RELEASE);
atomic64_set(&perf->noa_programming_delay,
500 * 1000 /* 500us */);
perf->i915 = i915;
ret = oa_init_engine_groups(perf);
if (ret) {
drm_err(&i915->drm,
"OA initialization failed %d\n", ret);
return ret;
}
oa_init_supported_formats(perf);
}
return 0;
}
static int destroy_config(int id, void *p, void *data)
{
i915_oa_config_put(p);
return 0;
}
int i915_perf_sysctl_register(void)
{
sysctl_header = register_sysctl("dev/i915", oa_table);
return 0;
}
void i915_perf_sysctl_unregister(void)
{
unregister_sysctl_table(sysctl_header);
}
/**
* i915_perf_fini - Counter part to i915_perf_init()
* @i915: i915 device instance
*/
void i915_perf_fini(struct drm_i915_private *i915)
{
struct i915_perf *perf = &i915->perf;
struct intel_gt *gt;
int i;
if (!perf->i915)
return;
for_each_gt(gt, perf->i915, i)
kfree(gt->perf.group);
idr_for_each(&perf->metrics_idr, destroy_config, perf);
idr_destroy(&perf->metrics_idr);
memset(&perf->ops, 0, sizeof(perf->ops));
perf->i915 = NULL;
}
/**
* i915_perf_ioctl_version - Version of the i915-perf subsystem
* @i915: The i915 device
*
* This version number is used by userspace to detect available features.
*/
int i915_perf_ioctl_version(struct drm_i915_private *i915)
{
/*
* 1: Initial version
* I915_PERF_IOCTL_ENABLE
* I915_PERF_IOCTL_DISABLE
*
* 2: Added runtime modification of OA config.
* I915_PERF_IOCTL_CONFIG
*
* 3: Add DRM_I915_PERF_PROP_HOLD_PREEMPTION parameter to hold
* preemption on a particular context so that performance data is
* accessible from a delta of MI_RPC reports without looking at the
* OA buffer.
*
* 4: Add DRM_I915_PERF_PROP_ALLOWED_SSEU to limit what contexts can
* be run for the duration of the performance recording based on
* their SSEU configuration.
*
* 5: Add DRM_I915_PERF_PROP_POLL_OA_PERIOD parameter that controls the
* interval for the hrtimer used to check for OA data.
*
* 6: Add DRM_I915_PERF_PROP_OA_ENGINE_CLASS and
* DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE
*
* 7: Add support for video decode and enhancement classes.
*/
/*
* Wa_14017512683: mtl[a0..c0): Use of OAM must be preceded with Media
* C6 disable in BIOS. If Media C6 is enabled in BIOS, return version 6
* to indicate that OA media is not supported.
*/
if (IS_MEDIA_GT_IP_STEP(i915->media_gt, IP_VER(13, 0), STEP_A0, STEP_C0) &&
intel_check_bios_c6_setup(&i915->media_gt->rc6))
return 6;
return 7;
}
#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
#include "selftests/i915_perf.c"
#endif