blob: 158ede7538548e4d6daba4fc08d543f434b3ec6d [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* core_intr.c - DesignWare HS OTG Controller common interrupt handling
*
* Copyright (C) 2004-2013 Synopsys, Inc.
*/
/*
* This file contains the common interrupt handlers
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
#include "core.h"
#include "hcd.h"
static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
{
switch (hsotg->op_state) {
case OTG_STATE_A_HOST:
return "a_host";
case OTG_STATE_A_SUSPEND:
return "a_suspend";
case OTG_STATE_A_PERIPHERAL:
return "a_peripheral";
case OTG_STATE_B_PERIPHERAL:
return "b_peripheral";
case OTG_STATE_B_HOST:
return "b_host";
default:
return "unknown";
}
}
/**
* dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
* When the PRTINT interrupt fires, there are certain status bits in the Host
* Port that needs to get cleared.
*
* @hsotg: Programming view of DWC_otg controller
*/
static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
{
u32 hprt0 = dwc2_readl(hsotg, HPRT0);
if (hprt0 & HPRT0_ENACHG) {
hprt0 &= ~HPRT0_ENA;
dwc2_writel(hsotg, hprt0, HPRT0);
}
}
/**
* dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
*
* @hsotg: Programming view of DWC_otg controller
*/
static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
{
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
dwc2_is_host_mode(hsotg) ? "Host" : "Device");
}
/**
* dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
* Interrupt Register (GOTGINT) to determine what interrupt has occurred.
*
* @hsotg: Programming view of DWC_otg controller
*/
static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
{
u32 gotgint;
u32 gotgctl;
u32 gintmsk;
gotgint = dwc2_readl(hsotg, GOTGINT);
gotgctl = dwc2_readl(hsotg, GOTGCTL);
dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
dwc2_op_state_str(hsotg));
if (gotgint & GOTGINT_SES_END_DET) {
dev_dbg(hsotg->dev,
" ++OTG Interrupt: Session End Detected++ (%s)\n",
dwc2_op_state_str(hsotg));
gotgctl = dwc2_readl(hsotg, GOTGCTL);
if (dwc2_is_device_mode(hsotg))
dwc2_hsotg_disconnect(hsotg);
if (hsotg->op_state == OTG_STATE_B_HOST) {
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
} else {
/*
* If not B_HOST and Device HNP still set, HNP did
* not succeed!
*/
if (gotgctl & GOTGCTL_DEVHNPEN) {
dev_dbg(hsotg->dev, "Session End Detected\n");
dev_err(hsotg->dev,
"Device Not Connected/Responding!\n");
}
/*
* If Session End Detected the B-Cable has been
* disconnected
*/
/* Reset to a clean state */
hsotg->lx_state = DWC2_L0;
}
gotgctl = dwc2_readl(hsotg, GOTGCTL);
gotgctl &= ~GOTGCTL_DEVHNPEN;
dwc2_writel(hsotg, gotgctl, GOTGCTL);
}
if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
dev_dbg(hsotg->dev,
" ++OTG Interrupt: Session Request Success Status Change++\n");
gotgctl = dwc2_readl(hsotg, GOTGCTL);
if (gotgctl & GOTGCTL_SESREQSCS) {
if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
hsotg->params.i2c_enable) {
hsotg->srp_success = 1;
} else {
/* Clear Session Request */
gotgctl = dwc2_readl(hsotg, GOTGCTL);
gotgctl &= ~GOTGCTL_SESREQ;
dwc2_writel(hsotg, gotgctl, GOTGCTL);
}
}
}
if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
/*
* Print statements during the HNP interrupt handling
* can cause it to fail
*/
gotgctl = dwc2_readl(hsotg, GOTGCTL);
/*
* WA for 3.00a- HW is not setting cur_mode, even sometimes
* this does not help
*/
if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
udelay(100);
if (gotgctl & GOTGCTL_HSTNEGSCS) {
if (dwc2_is_host_mode(hsotg)) {
hsotg->op_state = OTG_STATE_B_HOST;
/*
* Need to disable SOF interrupt immediately.
* When switching from device to host, the PCD
* interrupt handler won't handle the interrupt
* if host mode is already set. The HCD
* interrupt handler won't get called if the
* HCD state is HALT. This means that the
* interrupt does not get handled and Linux
* complains loudly.
*/
gintmsk = dwc2_readl(hsotg, GINTMSK);
gintmsk &= ~GINTSTS_SOF;
dwc2_writel(hsotg, gintmsk, GINTMSK);
/*
* Call callback function with spin lock
* released
*/
spin_unlock(&hsotg->lock);
/* Initialize the Core for Host mode */
dwc2_hcd_start(hsotg);
spin_lock(&hsotg->lock);
hsotg->op_state = OTG_STATE_B_HOST;
}
} else {
gotgctl = dwc2_readl(hsotg, GOTGCTL);
gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
dwc2_writel(hsotg, gotgctl, GOTGCTL);
dev_dbg(hsotg->dev, "HNP Failed\n");
dev_err(hsotg->dev,
"Device Not Connected/Responding\n");
}
}
if (gotgint & GOTGINT_HST_NEG_DET) {
/*
* The disconnect interrupt is set at the same time as
* Host Negotiation Detected. During the mode switch all
* interrupts are cleared so the disconnect interrupt
* handler will not get executed.
*/
dev_dbg(hsotg->dev,
" ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
(dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
if (dwc2_is_device_mode(hsotg)) {
dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
hsotg->op_state);
spin_unlock(&hsotg->lock);
dwc2_hcd_disconnect(hsotg, false);
spin_lock(&hsotg->lock);
hsotg->op_state = OTG_STATE_A_PERIPHERAL;
} else {
/* Need to disable SOF interrupt immediately */
gintmsk = dwc2_readl(hsotg, GINTMSK);
gintmsk &= ~GINTSTS_SOF;
dwc2_writel(hsotg, gintmsk, GINTMSK);
spin_unlock(&hsotg->lock);
dwc2_hcd_start(hsotg);
spin_lock(&hsotg->lock);
hsotg->op_state = OTG_STATE_A_HOST;
}
}
if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
dev_dbg(hsotg->dev,
" ++OTG Interrupt: A-Device Timeout Change++\n");
if (gotgint & GOTGINT_DBNCE_DONE)
dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
/* Clear GOTGINT */
dwc2_writel(hsotg, gotgint, GOTGINT);
}
/**
* dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
* Change Interrupt
*
* @hsotg: Programming view of DWC_otg controller
*
* Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
* Device to Host Mode transition or a Host to Device Mode transition. This only
* occurs when the cable is connected/removed from the PHY connector.
*/
static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
{
u32 gintmsk;
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
/* Need to disable SOF interrupt immediately */
gintmsk = dwc2_readl(hsotg, GINTMSK);
gintmsk &= ~GINTSTS_SOF;
dwc2_writel(hsotg, gintmsk, GINTMSK);
dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n",
dwc2_is_host_mode(hsotg) ? "Host" : "Device");
/*
* Need to schedule a work, as there are possible DELAY function calls.
*/
if (hsotg->wq_otg)
queue_work(hsotg->wq_otg, &hsotg->wf_otg);
}
/**
* dwc2_handle_session_req_intr() - This interrupt indicates that a device is
* initiating the Session Request Protocol to request the host to turn on bus
* power so a new session can begin
*
* @hsotg: Programming view of DWC_otg controller
*
* This handler responds by turning on bus power. If the DWC_otg controller is
* in low power mode, this handler brings the controller out of low power mode
* before turning on bus power.
*/
static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
{
int ret;
u32 hprt0;
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
hsotg->lx_state);
if (dwc2_is_device_mode(hsotg)) {
if (hsotg->lx_state == DWC2_L2) {
if (hsotg->in_ppd) {
ret = dwc2_exit_partial_power_down(hsotg, 0,
true);
if (ret)
dev_err(hsotg->dev,
"exit power_down failed\n");
}
/* Exit gadget mode clock gating. */
if (hsotg->params.power_down ==
DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
dwc2_gadget_exit_clock_gating(hsotg, 0);
}
/*
* Report disconnect if there is any previous session
* established
*/
dwc2_hsotg_disconnect(hsotg);
} else {
/* Turn on the port power bit. */
hprt0 = dwc2_read_hprt0(hsotg);
hprt0 |= HPRT0_PWR;
dwc2_writel(hsotg, hprt0, HPRT0);
/* Connect hcd after port power is set. */
dwc2_hcd_connect(hsotg);
}
}
/**
* dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
*
* @hsotg: Programming view of DWC_otg controller
*
*/
static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
{
u32 glpmcfg;
u32 i = 0;
if (hsotg->lx_state != DWC2_L1) {
dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
return;
}
glpmcfg = dwc2_readl(hsotg, GLPMCFG);
if (dwc2_is_device_mode(hsotg)) {
dev_dbg(hsotg->dev, "Exit from L1 state\n");
glpmcfg &= ~GLPMCFG_ENBLSLPM;
glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
dwc2_writel(hsotg, glpmcfg, GLPMCFG);
do {
glpmcfg = dwc2_readl(hsotg, GLPMCFG);
if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
break;
udelay(1);
} while (++i < 200);
if (i == 200) {
dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
return;
}
dwc2_gadget_init_lpm(hsotg);
} else {
/* TODO */
dev_err(hsotg->dev, "Host side LPM is not supported.\n");
return;
}
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
/* Inform gadget to exit from L1 */
call_gadget(hsotg, resume);
}
/*
* This interrupt indicates that the DWC_otg controller has detected a
* resume or remote wakeup sequence. If the DWC_otg controller is in
* low power mode, the handler must brings the controller out of low
* power mode. The controller automatically begins resume signaling.
* The handler schedules a time to stop resume signaling.
*/
static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
{
int ret;
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
if (hsotg->lx_state == DWC2_L1) {
dwc2_wakeup_from_lpm_l1(hsotg);
return;
}
if (dwc2_is_device_mode(hsotg)) {
dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
dwc2_readl(hsotg, DSTS));
if (hsotg->lx_state == DWC2_L2) {
if (hsotg->in_ppd) {
u32 dctl = dwc2_readl(hsotg, DCTL);
/* Clear Remote Wakeup Signaling */
dctl &= ~DCTL_RMTWKUPSIG;
dwc2_writel(hsotg, dctl, DCTL);
ret = dwc2_exit_partial_power_down(hsotg, 1,
true);
if (ret)
dev_err(hsotg->dev,
"exit partial_power_down failed\n");
call_gadget(hsotg, resume);
}
/* Exit gadget mode clock gating. */
if (hsotg->params.power_down ==
DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
dwc2_gadget_exit_clock_gating(hsotg, 0);
} else {
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
}
} else {
if (hsotg->lx_state == DWC2_L2) {
if (hsotg->in_ppd) {
ret = dwc2_exit_partial_power_down(hsotg, 1,
true);
if (ret)
dev_err(hsotg->dev,
"exit partial_power_down failed\n");
}
if (hsotg->params.power_down ==
DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
dwc2_host_exit_clock_gating(hsotg, 1);
/*
* If we've got this quirk then the PHY is stuck upon
* wakeup. Assert reset. This will propagate out and
* eventually we'll re-enumerate the device. Not great
* but the best we can do. We can't call phy_reset()
* at interrupt time but there's no hurry, so we'll
* schedule it for later.
*/
if (hsotg->reset_phy_on_wake)
dwc2_host_schedule_phy_reset(hsotg);
mod_timer(&hsotg->wkp_timer,
jiffies + msecs_to_jiffies(71));
} else {
/* Change to L0 state */
hsotg->lx_state = DWC2_L0;
}
}
}
/*
* This interrupt indicates that a device has been disconnected from the
* root port
*/
static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
{
dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
dwc2_is_host_mode(hsotg) ? "Host" : "Device",
dwc2_op_state_str(hsotg));
if (hsotg->op_state == OTG_STATE_A_HOST)
dwc2_hcd_disconnect(hsotg, false);
}
/*
* This interrupt indicates that SUSPEND state has been detected on the USB.
*
* For HNP the USB Suspend interrupt signals the change from "a_peripheral"
* to "a_host".
*
* When power management is enabled the core will be put in low power mode.
*/
static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
{
u32 dsts;
int ret;
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
dev_dbg(hsotg->dev, "USB SUSPEND\n");
if (dwc2_is_device_mode(hsotg)) {
/*
* Check the Device status register to determine if the Suspend
* state is active
*/
dsts = dwc2_readl(hsotg, DSTS);
dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
dev_dbg(hsotg->dev,
"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
!!(dsts & DSTS_SUSPSTS),
hsotg->hw_params.power_optimized,
hsotg->hw_params.hibernation);
/* Ignore suspend request before enumeration */
if (!dwc2_is_device_connected(hsotg)) {
dev_dbg(hsotg->dev,
"ignore suspend request before enumeration\n");
return;
}
if (dsts & DSTS_SUSPSTS) {
switch (hsotg->params.power_down) {
case DWC2_POWER_DOWN_PARAM_PARTIAL:
ret = dwc2_enter_partial_power_down(hsotg);
if (ret)
dev_err(hsotg->dev,
"enter partial_power_down failed\n");
udelay(100);
/* Ask phy to be suspended */
if (!IS_ERR_OR_NULL(hsotg->uphy))
usb_phy_set_suspend(hsotg->uphy, true);
break;
case DWC2_POWER_DOWN_PARAM_HIBERNATION:
ret = dwc2_enter_hibernation(hsotg, 0);
if (ret)
dev_err(hsotg->dev,
"enter hibernation failed\n");
break;
case DWC2_POWER_DOWN_PARAM_NONE:
/*
* If neither hibernation nor partial power down are supported,
* clock gating is used to save power.
*/
if (!hsotg->params.no_clock_gating)
dwc2_gadget_enter_clock_gating(hsotg);
}
/*
* Change to L2 (suspend) state before releasing
* spinlock
*/
hsotg->lx_state = DWC2_L2;
/* Call gadget suspend callback */
call_gadget(hsotg, suspend);
}
} else {
if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
/* Change to L2 (suspend) state */
hsotg->lx_state = DWC2_L2;
/* Clear the a_peripheral flag, back to a_host */
spin_unlock(&hsotg->lock);
dwc2_hcd_start(hsotg);
spin_lock(&hsotg->lock);
hsotg->op_state = OTG_STATE_A_HOST;
}
}
}
/**
* dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
*
* @hsotg: Programming view of DWC_otg controller
*
*/
static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
{
u32 glpmcfg;
u32 pcgcctl;
u32 hird;
u32 hird_thres;
u32 hird_thres_en;
u32 enslpm;
/* Clear interrupt */
dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
glpmcfg = dwc2_readl(hsotg, GLPMCFG);
if (!(glpmcfg & GLPMCFG_LPMCAP)) {
dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
return;
}
hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
if (dwc2_is_device_mode(hsotg)) {
dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
if (hird_thres_en && hird >= hird_thres) {
dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
} else if (enslpm) {
dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
} else {
dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
pcgcctl = dwc2_readl(hsotg, PCGCTL);
pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
dwc2_writel(hsotg, pcgcctl, PCGCTL);
}
/**
* Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
*/
udelay(10);
glpmcfg = dwc2_readl(hsotg, GLPMCFG);
if (glpmcfg & GLPMCFG_SLPSTS) {
/* Save the current state */
hsotg->lx_state = DWC2_L1;
dev_dbg(hsotg->dev,
"Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
/* Inform gadget that we are in L1 state */
call_gadget(hsotg, suspend);
}
}
}
#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \
GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \
GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \
GINTSTS_USBSUSP | GINTSTS_PRTINT | \
GINTSTS_LPMTRANRCVD)
/*
* This function returns the Core Interrupt register
*/
static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
{
u32 gintsts;
u32 gintmsk;
u32 gahbcfg;
u32 gintmsk_common = GINTMSK_COMMON;
gintsts = dwc2_readl(hsotg, GINTSTS);
gintmsk = dwc2_readl(hsotg, GINTMSK);
gahbcfg = dwc2_readl(hsotg, GAHBCFG);
/* If any common interrupts set */
if (gintsts & gintmsk_common)
dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n",
gintsts, gintmsk);
if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
return gintsts & gintmsk & gintmsk_common;
else
return 0;
}
/**
* dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
* Exits hibernation without restoring registers.
*
* @hsotg: Programming view of DWC_otg controller
* @gpwrdn: GPWRDN register
*/
static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
u32 gpwrdn)
{
u32 gpwrdn_tmp;
/* Switch-on voltage to the core */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
udelay(5);
/* Reset core */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
udelay(5);
/* Disable Power Down Clamp */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
udelay(5);
/* Deassert reset core */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
udelay(5);
/* Disable PMU interrupt */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
/* De-assert Wakeup Logic */
gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
gpwrdn_tmp &= ~GPWRDN_PMUACTV;
dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
hsotg->hibernated = 0;
hsotg->bus_suspended = 0;
if (gpwrdn & GPWRDN_IDSTS) {
hsotg->op_state = OTG_STATE_B_PERIPHERAL;
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
dwc2_hsotg_core_init_disconnected(hsotg, false);
dwc2_hsotg_core_connect(hsotg);
} else {
hsotg->op_state = OTG_STATE_A_HOST;
/* Initialize the Core for Host mode */
dwc2_core_init(hsotg, false);
dwc2_enable_global_interrupts(hsotg);
dwc2_hcd_start(hsotg);
}
}
/*
* GPWRDN interrupt handler.
*
* The GPWRDN interrupts are those that occur in both Host and
* Device mode while core is in hibernated state.
*/
static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
{
u32 gpwrdn;
int linestate;
int ret = 0;
gpwrdn = dwc2_readl(hsotg, GPWRDN);
/* clear all interrupt */
dwc2_writel(hsotg, gpwrdn, GPWRDN);
linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
dev_dbg(hsotg->dev,
"%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
gpwrdn);
if ((gpwrdn & GPWRDN_DISCONN_DET) &&
(gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
/*
* Call disconnect detect function to exit from
* hibernation
*/
dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
} else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
(gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
if (hsotg->hw_params.hibernation &&
hsotg->hibernated) {
if (gpwrdn & GPWRDN_IDSTS) {
ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
call_gadget(hsotg, resume);
} else {
ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
}
}
} else if ((gpwrdn & GPWRDN_RST_DET) &&
(gpwrdn & GPWRDN_RST_DET_MSK)) {
dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
if (!linestate) {
ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
}
} else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
(gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
/*
* As GPWRDN_STS_CHGINT exit from hibernation flow is
* the same as in GPWRDN_DISCONN_DET flow. Call
* disconnect detect helper function to exit from
* hibernation.
*/
dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
}
return ret;
}
/*
* Common interrupt handler
*
* The common interrupts are those that occur in both Host and Device mode.
* This handler handles the following interrupts:
* - Mode Mismatch Interrupt
* - OTG Interrupt
* - Connector ID Status Change Interrupt
* - Disconnect Interrupt
* - Session Request Interrupt
* - Resume / Remote Wakeup Detected Interrupt
* - Suspend Interrupt
*/
irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
{
struct dwc2_hsotg *hsotg = dev;
u32 gintsts;
irqreturn_t retval = IRQ_NONE;
spin_lock(&hsotg->lock);
if (!dwc2_is_controller_alive(hsotg)) {
dev_warn(hsotg->dev, "Controller is dead\n");
goto out;
}
/* Reading current frame number value in device or host modes. */
if (dwc2_is_device_mode(hsotg))
hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
& DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
else
hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
& HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
gintsts = dwc2_read_common_intr(hsotg);
if (gintsts & ~GINTSTS_PRTINT)
retval = IRQ_HANDLED;
/* In case of hibernated state gintsts must not work */
if (hsotg->hibernated) {
dwc2_handle_gpwrdn_intr(hsotg);
retval = IRQ_HANDLED;
goto out;
}
if (gintsts & GINTSTS_MODEMIS)
dwc2_handle_mode_mismatch_intr(hsotg);
if (gintsts & GINTSTS_OTGINT)
dwc2_handle_otg_intr(hsotg);
if (gintsts & GINTSTS_CONIDSTSCHNG)
dwc2_handle_conn_id_status_change_intr(hsotg);
if (gintsts & GINTSTS_DISCONNINT)
dwc2_handle_disconnect_intr(hsotg);
if (gintsts & GINTSTS_SESSREQINT)
dwc2_handle_session_req_intr(hsotg);
if (gintsts & GINTSTS_WKUPINT)
dwc2_handle_wakeup_detected_intr(hsotg);
if (gintsts & GINTSTS_USBSUSP)
dwc2_handle_usb_suspend_intr(hsotg);
if (gintsts & GINTSTS_LPMTRANRCVD)
dwc2_handle_lpm_intr(hsotg);
if (gintsts & GINTSTS_PRTINT) {
/*
* The port interrupt occurs while in device mode with HPRT0
* Port Enable/Disable
*/
if (dwc2_is_device_mode(hsotg)) {
dev_dbg(hsotg->dev,
" --Port interrupt received in Device mode--\n");
dwc2_handle_usb_port_intr(hsotg);
retval = IRQ_HANDLED;
}
}
out:
spin_unlock(&hsotg->lock);
return retval;
}