| /* |
| * Disk Array driver for Compaq SMART2 Controllers |
| * Copyright 2000 Compaq Computer Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Questions/Comments/Bugfixes to arrays@compaq.com |
| * |
| */ |
| |
| #include <linux/config.h> /* CONFIG_PROC_FS */ |
| #include <linux/module.h> |
| #include <linux/version.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/blkpg.h> |
| #include <linux/timer.h> |
| #include <linux/proc_fs.h> |
| #include <linux/init.h> |
| #include <linux/hdreg.h> |
| #include <linux/spinlock.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| #include <linux/blk.h> |
| #include <linux/blkdev.h> |
| #include <linux/genhd.h> |
| |
| #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) |
| #define DRIVER_NAME "Compaq CISS Driver (v 2.5.0)" |
| #define DRIVER_VERSION CCISS_DRIVER_VERSION(2,5,0) |
| |
| /* Embedded module documentation macros - see modules.h */ |
| MODULE_AUTHOR("Charles M. White III - Compaq Computer Corporation"); |
| MODULE_DESCRIPTION("Driver for Compaq Smart Array Controller 5xxx v. 2.5.0"); |
| MODULE_LICENSE("GPL"); |
| |
| #include "cciss_cmd.h" |
| #include "cciss.h" |
| #include <linux/cciss_ioctl.h> |
| |
| /* define the PCI info for the cards we can control */ |
| const struct pci_device_id cciss_pci_device_id[] = { |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS, |
| 0x0E11, 0x4070, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4080, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4082, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4083, 0, 0, 0}, |
| {0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); |
| |
| #define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type)) |
| |
| /* board_id = Subsystem Device ID & Vendor ID |
| * product = Marketing Name for the board |
| * access = Address of the struct of function pointers |
| */ |
| static struct board_type products[] = { |
| { 0x40700E11, "Smart Array 5300", &SA5_access }, |
| { 0x40800E11, "Smart Array 5i", &SA5B_access}, |
| { 0x40820E11, "Smart Array 532", &SA5B_access}, |
| { 0x40830E11, "Smart Array 5312", &SA5B_access}, |
| }; |
| |
| /* How long to wait (in millesconds) for board to go into simple mode */ |
| #define MAX_CONFIG_WAIT 1000 |
| |
| #define READ_AHEAD 128 |
| #define NR_CMDS 384 /* #commands that can be outstanding */ |
| #define MAX_CTLR 8 |
| |
| #define CCISS_DMA_MASK 0xFFFFFFFF /* 32 bit DMA */ |
| |
| static ctlr_info_t *hba[MAX_CTLR]; |
| |
| static struct proc_dir_entry *proc_cciss; |
| |
| static void do_cciss_request(request_queue_t *q); |
| static int cciss_open(struct inode *inode, struct file *filep); |
| static int cciss_release(struct inode *inode, struct file *filep); |
| static int cciss_ioctl(struct inode *inode, struct file *filep, |
| unsigned int cmd, unsigned long arg); |
| |
| static int revalidate_allvol(kdev_t dev); |
| static int revalidate_logvol(kdev_t dev, int maxusage); |
| static int frevalidate_logvol(kdev_t dev); |
| static int deregister_disk(int ctlr, int logvol); |
| static int register_new_disk(kdev_t dev, int cltr); |
| |
| static void cciss_getgeometry(int cntl_num); |
| |
| static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c); |
| static void start_io( ctlr_info_t *h); |
| |
| #ifdef CONFIG_PROC_FS |
| static int cciss_proc_get_info(char *buffer, char **start, off_t offset, |
| int length, int *eof, void *data); |
| static void cciss_procinit(int i); |
| #else |
| static int cciss_proc_get_info(char *buffer, char **start, off_t offset, |
| int length, int *eof, void *data) { return 0;} |
| static void cciss_procinit(int i) {} |
| #endif /* CONFIG_PROC_FS */ |
| |
| static struct block_device_operations cciss_fops = { |
| owner: THIS_MODULE, |
| open: cciss_open, |
| release: cciss_release, |
| ioctl: cciss_ioctl, |
| revalidate: frevalidate_logvol, |
| }; |
| |
| #include "cciss_scsi.c" /* For SCSI tape support */ |
| |
| /* |
| * Report information about this controller. |
| */ |
| #ifdef CONFIG_PROC_FS |
| static int cciss_proc_get_info(char *buffer, char **start, off_t offset, |
| int length, int *eof, void *data) |
| { |
| off_t pos = 0; |
| off_t len = 0; |
| int size, i, ctlr; |
| ctlr_info_t *h = (ctlr_info_t*)data; |
| drive_info_struct *drv; |
| |
| ctlr = h->ctlr; |
| size = sprintf(buffer, "%s: Compaq %s Controller\n" |
| " Board ID: 0x%08lx\n" |
| " Firmware Version: %c%c%c%c\n" |
| " Memory Address: 0x%08lx\n" |
| " IRQ: %d\n" |
| " Logical drives: %d\n" |
| " Highest Logical Volume ID: %d\n" |
| " Current Q depth: %d\n" |
| " Max Q depth since init: %d\n" |
| " Max # commands on controller since init: %d\n" |
| " Max SG entries since init: %d\n\n", |
| h->devname, |
| h->product_name, |
| (unsigned long)h->board_id, |
| h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], h->firm_ver[3], |
| (unsigned long)h->vaddr, |
| (unsigned int)h->intr, |
| h->num_luns, |
| h->highest_lun, |
| h->Qdepth, h->maxQsinceinit, h->max_outstanding, h->maxSG); |
| |
| pos += size; len += size; |
| cciss_proc_tape_report(ctlr, buffer, &pos, &len); |
| for(i=0; i<h->highest_lun; i++) { |
| drv = &h->drv[i]; |
| if (drv->block_size == 0) |
| continue; |
| size = sprintf(buffer+len, "cciss/c%dd%d: blksz=%d nr_blocks=%d\n", |
| ctlr, i, drv->block_size, drv->nr_blocks); |
| pos += size; len += size; |
| } |
| |
| size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n", |
| h->nr_allocs, h->nr_frees); |
| pos += size; len += size; |
| |
| *eof = 1; |
| *start = buffer+offset; |
| len -= offset; |
| if (len>length) |
| len = length; |
| return len; |
| } |
| |
| static int |
| cciss_proc_write(struct file *file, const char *buffer, |
| unsigned long count, void *data) |
| { |
| unsigned char cmd[80]; |
| int len; |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| ctlr_info_t *h = (ctlr_info_t *) data; |
| int rc; |
| #endif |
| |
| if (count > sizeof(cmd)-1) return -EINVAL; |
| if (copy_from_user(cmd, buffer, count)) return -EFAULT; |
| cmd[count] = '\0'; |
| len = strlen(cmd); // above 3 lines ensure safety |
| if (cmd[len-1] == '\n') |
| cmd[--len] = '\0'; |
| # ifdef CONFIG_CISS_SCSI_TAPE |
| if (strcmp("engage scsi", cmd)==0) { |
| rc = cciss_engage_scsi(h->ctlr); |
| if (rc != 0) return -rc; |
| return count; |
| } |
| /* might be nice to have "disengage" too, but it's not |
| safely possible. (only 1 module use count, lock issues.) */ |
| # endif |
| return -EINVAL; |
| } |
| |
| /* |
| * Get us a file in /proc/cciss that says something about each controller. |
| * Create /proc/cciss if it doesn't exist yet. |
| */ |
| static void __init cciss_procinit(int i) |
| { |
| struct proc_dir_entry *pde; |
| |
| if (proc_cciss == NULL) { |
| proc_cciss = proc_mkdir("cciss", proc_root_driver); |
| if (!proc_cciss) |
| return; |
| } |
| |
| pde = create_proc_read_entry(hba[i]->devname, |
| S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, |
| proc_cciss, cciss_proc_get_info, hba[i]); |
| pde->write_proc = cciss_proc_write; |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * For operations that cannot sleep, a command block is allocated at init, |
| * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track |
| * which ones are free or in use. For operations that can wait for kmalloc |
| * to possible sleep, this routine can be called with get_from_pool set to 0. |
| * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was. |
| */ |
| static CommandList_struct * cmd_alloc(ctlr_info_t *h, int get_from_pool) |
| { |
| CommandList_struct *c; |
| int i; |
| u64bit temp64; |
| dma_addr_t cmd_dma_handle, err_dma_handle; |
| |
| if (!get_from_pool) |
| { |
| c = (CommandList_struct *) pci_alloc_consistent( |
| h->pdev, sizeof(CommandList_struct), &cmd_dma_handle); |
| if(c==NULL) |
| return NULL; |
| memset(c, 0, sizeof(CommandList_struct)); |
| |
| c->err_info = (ErrorInfo_struct *)pci_alloc_consistent( |
| h->pdev, sizeof(ErrorInfo_struct), |
| &err_dma_handle); |
| |
| if (c->err_info == NULL) |
| { |
| pci_free_consistent(h->pdev, |
| sizeof(CommandList_struct), c, cmd_dma_handle); |
| return NULL; |
| } |
| memset(c->err_info, 0, sizeof(ErrorInfo_struct)); |
| } else /* get it out of the controllers pool */ |
| { |
| do { |
| i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); |
| if (i == NR_CMDS) |
| return NULL; |
| } while(test_and_set_bit(i & 31, h->cmd_pool_bits+(i/32)) != 0); |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: using command buffer %d\n", i); |
| #endif |
| c = h->cmd_pool + i; |
| memset(c, 0, sizeof(CommandList_struct)); |
| cmd_dma_handle = h->cmd_pool_dhandle |
| + i*sizeof(CommandList_struct); |
| c->err_info = h->errinfo_pool + i; |
| memset(c->err_info, 0, sizeof(ErrorInfo_struct)); |
| err_dma_handle = h->errinfo_pool_dhandle |
| + i*sizeof(ErrorInfo_struct); |
| h->nr_allocs++; |
| } |
| |
| c->busaddr = (__u32) cmd_dma_handle; |
| temp64.val = (__u64) err_dma_handle; |
| c->ErrDesc.Addr.lower = temp64.val32.lower; |
| c->ErrDesc.Addr.upper = temp64.val32.upper; |
| c->ErrDesc.Len = sizeof(ErrorInfo_struct); |
| |
| c->ctlr = h->ctlr; |
| return c; |
| |
| |
| } |
| |
| /* |
| * Frees a command block that was previously allocated with cmd_alloc(). |
| */ |
| static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool) |
| { |
| int i; |
| u64bit temp64; |
| |
| if( !got_from_pool) |
| { |
| temp64.val32.lower = c->ErrDesc.Addr.lower; |
| temp64.val32.upper = c->ErrDesc.Addr.upper; |
| pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), |
| c->err_info, (dma_addr_t) temp64.val); |
| pci_free_consistent(h->pdev, sizeof(CommandList_struct), |
| c, (dma_addr_t) c->busaddr); |
| } else |
| { |
| i = c - h->cmd_pool; |
| clear_bit(i%32, h->cmd_pool_bits+(i/32)); |
| h->nr_frees++; |
| } |
| } |
| |
| /* |
| * fills in the disk information. |
| */ |
| static void cciss_geninit( int ctlr) |
| { |
| drive_info_struct *drv; |
| int i,j; |
| |
| /* Loop through each real device */ |
| hba[ctlr]->gendisk.nr_real = 0; |
| for(i=0; i< NWD; i++) |
| { |
| drv = &(hba[ctlr]->drv[i]); |
| if( !(drv->nr_blocks)) |
| continue; |
| hba[ctlr]->hd[i << NWD_SHIFT].nr_sects = |
| hba[ctlr]->sizes[i << NWD_SHIFT] = drv->nr_blocks; |
| |
| /* for each partition */ |
| for(j=0; j<MAX_PART; j++) |
| hba[ctlr]->blocksizes[(i<<NWD_SHIFT) + j] = 1024; |
| |
| //hba[ctlr]->gendisk.nr_real++; |
| (BLK_DEFAULT_QUEUE(MAJOR_NR + ctlr))->hardsect_size = drv->block_size; |
| } |
| hba[ctlr]->gendisk.nr_real = hba[ctlr]->highest_lun+1; |
| } |
| /* |
| * Open. Make sure the device is really there. |
| */ |
| static int cciss_open(struct inode *inode, struct file *filep) |
| { |
| int ctlr = major(inode->i_rdev) - MAJOR_NR; |
| int dsk = minor(inode->i_rdev) >> NWD_SHIFT; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_open %x (%x:%x)\n", inode->i_rdev, ctlr, dsk); |
| #endif /* CCISS_DEBUG */ |
| |
| if (ctlr > MAX_CTLR || hba[ctlr] == NULL) |
| return -ENXIO; |
| /* |
| * Root is allowed to open raw volume zero even if its not configured |
| * so array config can still work. I don't think I really like this, |
| * but I'm already using way to many device nodes to claim another one |
| * for "raw controller". |
| */ |
| if (hba[ctlr]->sizes[minor(inode->i_rdev)] == 0) { |
| if (minor(inode->i_rdev) != 0) |
| return -ENXIO; |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| } |
| hba[ctlr]->drv[dsk].usage_count++; |
| hba[ctlr]->usage_count++; |
| return 0; |
| } |
| /* |
| * Close. Sync first. |
| */ |
| static int cciss_release(struct inode *inode, struct file *filep) |
| { |
| int ctlr = major(inode->i_rdev) - MAJOR_NR; |
| int dsk = minor(inode->i_rdev) >> NWD_SHIFT; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_release %x (%x:%x)\n", inode->i_rdev, ctlr, dsk); |
| #endif /* CCISS_DEBUG */ |
| |
| /* fsync_dev(inode->i_rdev); */ |
| |
| hba[ctlr]->drv[dsk].usage_count--; |
| hba[ctlr]->usage_count--; |
| return 0; |
| } |
| |
| /* |
| * ioctl |
| */ |
| static int cciss_ioctl(struct inode *inode, struct file *filep, |
| unsigned int cmd, unsigned long arg) |
| { |
| int ctlr = major(inode->i_rdev) - MAJOR_NR; |
| int dsk = minor(inode->i_rdev) >> NWD_SHIFT; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg); |
| #endif /* CCISS_DEBUG */ |
| |
| switch(cmd) { |
| case HDIO_GETGEO: |
| { |
| struct hd_geometry driver_geo; |
| if (hba[ctlr]->drv[dsk].cylinders) { |
| driver_geo.heads = hba[ctlr]->drv[dsk].heads; |
| driver_geo.sectors = hba[ctlr]->drv[dsk].sectors; |
| driver_geo.cylinders = hba[ctlr]->drv[dsk].cylinders; |
| } else { |
| driver_geo.heads = 0xff; |
| driver_geo.sectors = 0x3f; |
| driver_geo.cylinders = hba[ctlr]->drv[dsk].nr_blocks / (0xff*0x3f); |
| } |
| driver_geo.start= |
| hba[ctlr]->hd[minor(inode->i_rdev)].start_sect; |
| if (copy_to_user((void *) arg, &driver_geo, |
| sizeof( struct hd_geometry))) |
| return -EFAULT; |
| return(0); |
| } |
| case HDIO_GETGEO_BIG: |
| { |
| struct hd_big_geometry driver_geo; |
| if (hba[ctlr]->drv[dsk].cylinders) { |
| driver_geo.heads = hba[ctlr]->drv[dsk].heads; |
| driver_geo.sectors = hba[ctlr]->drv[dsk].sectors; |
| driver_geo.cylinders = hba[ctlr]->drv[dsk].cylinders; |
| } else { |
| driver_geo.heads = 0xff; |
| driver_geo.sectors = 0x3f; |
| driver_geo.cylinders = hba[ctlr]->drv[dsk].nr_blocks / (0xff*0x3f); |
| } |
| driver_geo.start= |
| hba[ctlr]->hd[minor(inode->i_rdev)].start_sect; |
| if (copy_to_user((void *) arg, &driver_geo, |
| sizeof( struct hd_big_geometry))) |
| return -EFAULT; |
| return(0); |
| } |
| case BLKRRPART: |
| return revalidate_logvol(inode->i_rdev, 1); |
| case BLKGETSIZE: |
| case BLKGETSIZE64: |
| case BLKFLSBUF: |
| case BLKBSZSET: |
| case BLKBSZGET: |
| case BLKROSET: |
| case BLKROGET: |
| case BLKPG: |
| return blk_ioctl(inode->i_bdev, cmd, arg); |
| case CCISS_GETPCIINFO: |
| { |
| cciss_pci_info_struct pciinfo; |
| |
| if (!arg) return -EINVAL; |
| pciinfo.bus = hba[ctlr]->pdev->bus->number; |
| pciinfo.dev_fn = hba[ctlr]->pdev->devfn; |
| pciinfo.board_id = hba[ctlr]->board_id; |
| if (copy_to_user((void *) arg, &pciinfo, sizeof( cciss_pci_info_struct ))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETINTINFO: |
| { |
| cciss_coalint_struct intinfo; |
| ctlr_info_t *c = hba[ctlr]; |
| |
| if (!arg) return -EINVAL; |
| intinfo.delay = readl(&c->cfgtable->HostWrite.CoalIntDelay); |
| intinfo.count = readl(&c->cfgtable->HostWrite.CoalIntCount); |
| if (copy_to_user((void *) arg, &intinfo, sizeof( cciss_coalint_struct ))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_SETINTINFO: |
| { |
| cciss_coalint_struct intinfo; |
| ctlr_info_t *c = hba[ctlr]; |
| unsigned long flags; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) return -EPERM; |
| if (copy_from_user(&intinfo, (void *) arg, sizeof( cciss_coalint_struct))) |
| return -EFAULT; |
| if ( (intinfo.delay == 0 ) && (intinfo.count == 0)) |
| |
| { |
| // printk("cciss_ioctl: delay and count cannot be 0\n"); |
| return( -EINVAL); |
| } |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| /* Update the field, and then ring the doorbell */ |
| writel( intinfo.delay, |
| &(c->cfgtable->HostWrite.CoalIntDelay)); |
| writel( intinfo.count, |
| &(c->cfgtable->HostWrite.CoalIntCount)); |
| writel( CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); |
| |
| for(i=0;i<MAX_CONFIG_WAIT;i++) |
| { |
| if (!(readl(c->vaddr + SA5_DOORBELL) |
| & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| udelay(1000); |
| } |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| if (i >= MAX_CONFIG_WAIT) |
| return( -EFAULT); |
| return(0); |
| } |
| case CCISS_GETNODENAME: |
| { |
| NodeName_type NodeName; |
| ctlr_info_t *c = hba[ctlr]; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| for(i=0;i<16;i++) |
| NodeName[i] = readb(&c->cfgtable->ServerName[i]); |
| if (copy_to_user((void *) arg, NodeName, sizeof( NodeName_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_SETNODENAME: |
| { |
| NodeName_type NodeName; |
| ctlr_info_t *c = hba[ctlr]; |
| unsigned long flags; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) return -EPERM; |
| |
| if (copy_from_user(NodeName, (void *) arg, sizeof( NodeName_type))) |
| return -EFAULT; |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| |
| /* Update the field, and then ring the doorbell */ |
| for(i=0;i<16;i++) |
| writeb( NodeName[i], &c->cfgtable->ServerName[i]); |
| |
| writel( CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); |
| |
| for(i=0;i<MAX_CONFIG_WAIT;i++) |
| { |
| if (!(readl(c->vaddr + SA5_DOORBELL) |
| & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| udelay(1000); |
| } |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| if (i >= MAX_CONFIG_WAIT) |
| return( -EFAULT); |
| return(0); |
| } |
| |
| case CCISS_GETHEARTBEAT: |
| { |
| Heartbeat_type heartbeat; |
| ctlr_info_t *c = hba[ctlr]; |
| |
| if (!arg) return -EINVAL; |
| heartbeat = readl(&c->cfgtable->HeartBeat); |
| if (copy_to_user((void *) arg, &heartbeat, sizeof( Heartbeat_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETBUSTYPES: |
| { |
| BusTypes_type BusTypes; |
| ctlr_info_t *c = hba[ctlr]; |
| |
| if (!arg) return -EINVAL; |
| BusTypes = readl(&c->cfgtable->BusTypes); |
| if (copy_to_user((void *) arg, &BusTypes, sizeof( BusTypes_type) )) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETFIRMVER: |
| { |
| FirmwareVer_type firmware; |
| |
| if (!arg) return -EINVAL; |
| memcpy(firmware, hba[ctlr]->firm_ver, 4); |
| |
| if (copy_to_user((void *) arg, firmware, sizeof( FirmwareVer_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETDRIVVER: |
| { |
| DriverVer_type DriverVer = DRIVER_VERSION; |
| |
| if (!arg) return -EINVAL; |
| |
| if (copy_to_user((void *) arg, &DriverVer, sizeof( DriverVer_type) )) |
| return -EFAULT; |
| return(0); |
| } |
| |
| case CCISS_REVALIDVOLS: |
| return( revalidate_allvol(inode->i_rdev)); |
| |
| case CCISS_DEREGDISK: |
| return( deregister_disk(ctlr,dsk)); |
| |
| case CCISS_REGNEWD: |
| { |
| return(register_new_disk(inode->i_rdev, ctlr)); |
| } |
| case CCISS_PASSTHRU: |
| { |
| IOCTL_Command_struct iocommand; |
| ctlr_info_t *h = hba[ctlr]; |
| CommandList_struct *c; |
| char *buff = NULL; |
| u64bit temp64; |
| unsigned long flags; |
| DECLARE_COMPLETION(wait); |
| |
| if (!arg) return -EINVAL; |
| |
| if (!capable(CAP_SYS_RAWIO)) return -EPERM; |
| |
| if (copy_from_user(&iocommand, (void *) arg, sizeof( IOCTL_Command_struct) )) |
| return -EFAULT; |
| if((iocommand.buf_size < 1) && |
| (iocommand.Request.Type.Direction != XFER_NONE)) |
| { |
| return -EINVAL; |
| } |
| /* Check kmalloc limits */ |
| if(iocommand.buf_size > 128000) |
| return -EINVAL; |
| if(iocommand.buf_size > 0) |
| { |
| buff = kmalloc(iocommand.buf_size, GFP_KERNEL); |
| if( buff == NULL) |
| return -EFAULT; |
| } |
| if (iocommand.Request.Type.Direction == XFER_WRITE) |
| { |
| /* Copy the data into the buffer we created */ |
| if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) |
| { |
| kfree(buff); |
| return -EFAULT; |
| } |
| } |
| if ((c = cmd_alloc(h , 0)) == NULL) |
| { |
| kfree(buff); |
| return -ENOMEM; |
| } |
| // Fill in the command type |
| c->cmd_type = CMD_IOCTL_PEND; |
| // Fill in Command Header |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| if( iocommand.buf_size > 0) // buffer to fill |
| { |
| c->Header.SGList = 1; |
| c->Header.SGTotal= 1; |
| } else // no buffers to fill |
| { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.LUN = iocommand.LUN_info; |
| c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag |
| |
| // Fill in Request block |
| c->Request = iocommand.Request; |
| |
| // Fill in the scatter gather information |
| if (iocommand.buf_size > 0 ) |
| { |
| temp64.val = pci_map_single( h->pdev, buff, |
| iocommand.buf_size, |
| PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = temp64.val32.lower; |
| c->SG[0].Addr.upper = temp64.val32.upper; |
| c->SG[0].Len = iocommand.buf_size; |
| c->SG[0].Ext = 0; // we are not chaining |
| } |
| c->waiting = &wait; |
| |
| /* Put the request on the tail of the request queue */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| start_io(h); |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| wait_for_completion(&wait); |
| |
| /* unlock the buffers from DMA */ |
| temp64.val32.lower = c->SG[0].Addr.lower; |
| temp64.val32.upper = c->SG[0].Addr.upper; |
| pci_unmap_single( h->pdev, (dma_addr_t) temp64.val, |
| iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); |
| |
| /* Copy the error information out */ |
| iocommand.error_info = *(c->err_info); |
| if ( copy_to_user((void *) arg, &iocommand, sizeof( IOCTL_Command_struct) ) ) |
| { |
| kfree(buff); |
| cmd_free(h, c, 0); |
| return( -EFAULT); |
| } |
| |
| if (iocommand.Request.Type.Direction == XFER_READ) |
| { |
| /* Copy the data out of the buffer we created */ |
| if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) |
| { |
| kfree(buff); |
| cmd_free(h, c, 0); |
| return -EFAULT; |
| } |
| } |
| kfree(buff); |
| cmd_free(h, c, 0); |
| return(0); |
| } |
| |
| default: |
| return -EBADRQC; |
| } |
| |
| } |
| |
| /* Borrowed and adapted from sd.c */ |
| static int revalidate_logvol(kdev_t dev, int maxusage) |
| { |
| int ctlr, target; |
| struct gendisk *gdev; |
| unsigned long flags; |
| int res; |
| |
| target = minor(dev) >> NWD_SHIFT; |
| ctlr = major(dev) - MAJOR_NR; |
| gdev = &(hba[ctlr]->gendisk); |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| if (hba[ctlr]->drv[target].usage_count > maxusage) { |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| printk(KERN_WARNING "cciss: Device busy for " |
| "revalidation (usage=%d)\n", |
| hba[ctlr]->drv[target].usage_count); |
| return -EBUSY; |
| } |
| hba[ctlr]->drv[target].usage_count++; |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| res = wipe_partitions(dev); |
| if (res) |
| goto leave; |
| |
| /* setup partitions per disk */ |
| grok_partitions(dev, hba[ctlr]->drv[target].nr_blocks); |
| leave: |
| hba[ctlr]->drv[target].usage_count--; |
| return res; |
| } |
| |
| static int frevalidate_logvol(kdev_t dev) |
| { |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: frevalidate has been called\n"); |
| #endif /* CCISS_DEBUG */ |
| return revalidate_logvol(dev, 0); |
| } |
| |
| /* |
| * revalidate_allvol is for online array config utilities. After a |
| * utility reconfigures the drives in the array, it can use this function |
| * (through an ioctl) to make the driver zap any previous disk structs for |
| * that controller and get new ones. |
| * |
| * Right now I'm using the getgeometry() function to do this, but this |
| * function should probably be finer grained and allow you to revalidate one |
| * particualar logical volume (instead of all of them on a particular |
| * controller). |
| */ |
| static int revalidate_allvol(kdev_t dev) |
| { |
| int ctlr, i; |
| unsigned long flags; |
| |
| ctlr = major(dev) - MAJOR_NR; |
| if (minor(dev) != 0) |
| return -ENXIO; |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| if (hba[ctlr]->usage_count > 1) { |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| printk(KERN_WARNING "cciss: Device busy for volume" |
| " revalidation (usage=%d)\n", hba[ctlr]->usage_count); |
| return -EBUSY; |
| } |
| hba[ctlr]->usage_count++; |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| /* |
| * Set the partition and block size structures for all volumes |
| * on this controller to zero. We will reread all of this data |
| */ |
| memset(hba[ctlr]->hd, 0, sizeof(struct hd_struct) * 256); |
| memset(hba[ctlr]->sizes, 0, sizeof(int) * 256); |
| memset(hba[ctlr]->blocksizes, 0, sizeof(int) * 256); |
| memset(hba[ctlr]->drv, 0, sizeof(drive_info_struct) |
| * CISS_MAX_LUN); |
| hba[ctlr]->gendisk.nr_real = 0; |
| |
| /* |
| * Tell the array controller not to give us any interrupts while |
| * we check the new geometry. Then turn interrupts back on when |
| * we're done. |
| */ |
| hba[ctlr]->access.set_intr_mask(hba[ctlr], CCISS_INTR_OFF); |
| cciss_getgeometry(ctlr); |
| hba[ctlr]->access.set_intr_mask(hba[ctlr], CCISS_INTR_ON); |
| |
| cciss_geninit(ctlr); |
| for(i=0; i<NWD; i++) { |
| kdev_t kdev = mk_kdev(major(dev), i << NWD_SHIFT); |
| if (hba[ctlr]->sizes[ i<<NWD_SHIFT ]) |
| revalidate_logvol(kdev, 2); |
| } |
| |
| hba[ctlr]->usage_count--; |
| return 0; |
| } |
| |
| static int deregister_disk(int ctlr, int logvol) |
| { |
| unsigned long flags; |
| struct gendisk *gdev = &(hba[ctlr]->gendisk); |
| ctlr_info_t *h = hba[ctlr]; |
| int start, max_p, i; |
| |
| |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| /* make sure logical volume is NOT is use */ |
| if( h->drv[logvol].usage_count > 1) |
| { |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| return -EBUSY; |
| } |
| h->drv[logvol].usage_count++; |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| /* invalidate the devices and deregister the disk */ |
| max_p = 1 << gdev->minor_shift; |
| start = logvol << gdev->minor_shift; |
| for (i=max_p-1; i>=0; i--) |
| { |
| int minor = start+i; |
| kdev_t kdev = mk_kdev(MAJOR_NR+ctlr, minor); |
| // printk("invalidating( %d %d)\n", ctlr, minor); |
| invalidate_device(kdev, 1); |
| /* so open will now fail */ |
| h->sizes[minor] = 0; |
| /* so it will no longer appear in /proc/partitions */ |
| gdev->part[minor].start_sect = 0; |
| gdev->part[minor].nr_sects = 0; |
| } |
| /* check to see if it was the last disk */ |
| if (logvol == h->highest_lun) |
| { |
| /* if so, find the new hightest lun */ |
| int i, newhighest =-1; |
| for(i=0; i<h->highest_lun; i++) |
| { |
| /* if the disk has size > 0, it is available */ |
| if (h->sizes[i << gdev->minor_shift] != 0) |
| newhighest = i; |
| } |
| h->highest_lun = newhighest; |
| |
| } |
| --h->num_luns; |
| gdev->nr_real = h->highest_lun+1; |
| /* zero out the disk size info */ |
| h->drv[logvol].nr_blocks = 0; |
| h->drv[logvol].block_size = 0; |
| h->drv[logvol].LunID = 0; |
| return(0); |
| } |
| static int sendcmd_withirq(__u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int use_unit_num, |
| unsigned int log_unit, |
| __u8 page_code ) |
| { |
| ctlr_info_t *h = hba[ctlr]; |
| CommandList_struct *c; |
| u64bit buff_dma_handle; |
| unsigned long flags; |
| int return_status = IO_OK; |
| DECLARE_COMPLETION(wait); |
| |
| if ((c = cmd_alloc(h , 0)) == NULL) |
| { |
| return -ENOMEM; |
| } |
| // Fill in the command type |
| c->cmd_type = CMD_IOCTL_PEND; |
| // Fill in Command Header |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| if( buff != NULL) // buffer to fill |
| { |
| c->Header.SGList = 1; |
| c->Header.SGTotal= 1; |
| } else // no buffers to fill |
| { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag |
| // Fill in Request block |
| switch(cmd) |
| { |
| case CISS_INQUIRY: |
| /* If the logical unit number is 0 then, this is going |
| to controller so It's a physical command |
| mode = 0 target = 0. |
| So we have nothing to write. |
| Otherwise |
| mode = 1 target = LUNID |
| */ |
| if(use_unit_num != 0) |
| { |
| c->Header.LUN.LogDev.VolId= |
| hba[ctlr]->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| } |
| if(page_code != 0) |
| { |
| c->Request.CDB[1] = 0x01; |
| c->Request.CDB[2] = page_code; |
| } |
| c->Request.CDBLen = 6; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = CISS_INQUIRY; |
| c->Request.CDB[4] = size & 0xFF; |
| break; |
| case CISS_REPORT_LOG: |
| /* Talking to controller so It's a physical command |
| mode = 00 target = 0. |
| So we have nothing to write. |
| */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = CISS_REPORT_LOG; |
| c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB |
| c->Request.CDB[7] = (size >> 16) & 0xFF; |
| c->Request.CDB[8] = (size >> 8) & 0xFF; |
| c->Request.CDB[9] = size & 0xFF; |
| break; |
| case CCISS_READ_CAPACITY: |
| c->Header.LUN.LogDev.VolId= |
| hba[ctlr]->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| c->Request.CDBLen = 10; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = CCISS_READ_CAPACITY; |
| break; |
| default: |
| printk(KERN_WARNING |
| "cciss: Unknown Command 0x%c sent attempted\n", cmd); |
| cmd_free(h, c, 1); |
| return(IO_ERROR); |
| }; |
| |
| // Fill in the scatter gather information |
| if (size > 0 ) |
| { |
| buff_dma_handle.val = (__u64) pci_map_single( h->pdev, |
| buff, size, PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = buff_dma_handle.val32.lower; |
| c->SG[0].Addr.upper = buff_dma_handle.val32.upper; |
| c->SG[0].Len = size; |
| c->SG[0].Ext = 0; // we are not chaining |
| } |
| c->waiting = &wait; |
| |
| /* Put the request on the tail of the queue and send it */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| start_io(h); |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| wait_for_completion(&wait); |
| |
| /* unlock the buffers from DMA */ |
| pci_unmap_single( h->pdev, (dma_addr_t) buff_dma_handle.val, |
| size, PCI_DMA_BIDIRECTIONAL); |
| |
| if(c->err_info->CommandStatus != 0) |
| { /* an error has occurred */ |
| switch(c->err_info->CommandStatus) |
| { |
| case CMD_TARGET_STATUS: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| " completed with errors\n", c); |
| if( c->err_info->ScsiStatus) |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has SCSI Status = %x\n", |
| c, |
| c->err_info->ScsiStatus); |
| } |
| |
| break; |
| case CMD_DATA_UNDERRUN: |
| case CMD_DATA_OVERRUN: |
| /* expected for inquire and report lun commands */ |
| break; |
| case CMD_INVALID: |
| printk(KERN_WARNING "cciss: Cmd %p is " |
| "reported invalid\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_PROTOCOL_ERR: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| "protocol error \n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_HARDWARE_ERR: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| " hardware error\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_CONNECTION_LOST: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| "connection lost\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_ABORTED: |
| printk(KERN_WARNING "cciss: cmd %p was " |
| "aborted\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_ABORT_FAILED: |
| printk(KERN_WARNING "cciss: cmd %p reports " |
| "abort failed\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| printk(KERN_WARNING "cciss: cmd %p aborted " |
| "do to an unsolicited abort\n", c); |
| return_status = IO_ERROR; |
| |
| |
| break; |
| default: |
| printk(KERN_WARNING "cciss: cmd %p returned " |
| "unknown status %x\n", c, |
| c->err_info->CommandStatus); |
| return_status = IO_ERROR; |
| } |
| } |
| cmd_free(h, c, 0); |
| return(return_status); |
| |
| } |
| static int register_new_disk(kdev_t dev, int ctlr) |
| { |
| struct gendisk *gdev = &(hba[ctlr]->gendisk); |
| ctlr_info_t *h = hba[ctlr]; |
| int start, max_p, i; |
| int num_luns; |
| int logvol; |
| int new_lun_found = 0; |
| int new_lun_index = 0; |
| int free_index_found = 0; |
| int free_index = 0; |
| ReportLunData_struct *ld_buff; |
| ReadCapdata_struct *size_buff; |
| InquiryData_struct *inq_buff; |
| int return_code; |
| int listlength = 0; |
| __u32 lunid = 0; |
| unsigned int block_size; |
| unsigned int total_size; |
| kdev_t kdev; |
| |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| /* if we have no space in our disk array left to add anything */ |
| if( h->num_luns >= CISS_MAX_LUN) |
| return -EINVAL; |
| |
| ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL); |
| if (ld_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| return -1; |
| } |
| memset(ld_buff, 0, sizeof(ReportLunData_struct)); |
| size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); |
| if (size_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| kfree(ld_buff); |
| return -1; |
| } |
| inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); |
| if (inq_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| kfree(ld_buff); |
| kfree(size_buff); |
| return -1; |
| } |
| |
| return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, |
| sizeof(ReportLunData_struct), 0, 0, 0 ); |
| |
| if( return_code == IO_OK) |
| { |
| |
| // printk("LUN Data\n--------------------------\n"); |
| |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; |
| listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); |
| } else /* reading number of logical volumes failed */ |
| { |
| printk(KERN_WARNING "cciss: report logical volume" |
| " command failed\n"); |
| listlength = 0; |
| return -1; |
| } |
| num_luns = listlength / 8; // 8 bytes pre entry |
| if (num_luns > CISS_MAX_LUN) |
| { |
| num_luns = CISS_MAX_LUN; |
| } |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0], |
| ld_buff->LUNListLength[1], ld_buff->LUNListLength[2], |
| ld_buff->LUNListLength[3], num_luns); |
| #endif |
| for(i=0; i< num_luns; i++) |
| { |
| int j; |
| int lunID_found = 0; |
| |
| lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24; |
| lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16; |
| lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8; |
| lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); |
| |
| /* check to see if this is a new lun */ |
| for(j=0; j <= h->highest_lun; j++) |
| { |
| #ifdef CCISS_DEBUG |
| printk("Checking %d %x against %x\n", j,h->drv[j].LunID, |
| lunid); |
| #endif /* CCISS_DEBUG */ |
| if (h->drv[j].LunID == lunid) |
| { |
| lunID_found = 1; |
| break; |
| } |
| |
| } |
| if( lunID_found == 1) |
| continue; |
| else |
| { /* It is the new lun we have been looking for */ |
| #ifdef CCISS_DEBUG |
| printk("new lun found at %d\n", i); |
| #endif /* CCISS_DEBUG */ |
| new_lun_index = i; |
| new_lun_found = 1; |
| break; |
| } |
| } |
| if (!new_lun_found) |
| { |
| printk(KERN_WARNING "cciss: New Logical Volume not found\n"); |
| return -1; |
| } |
| /* Now find the free index */ |
| for(i=0; i <CISS_MAX_LUN; i++) |
| { |
| #ifdef CCISS_DEBUG |
| printk("Checking Index %d\n", i); |
| #endif /* CCISS_DEBUG */ |
| if(hba[ctlr]->drv[i].LunID == 0) |
| { |
| #ifdef CCISS_DEBUG |
| printk("free index found at %d\n", i); |
| #endif /* CCISS_DEBUG */ |
| free_index_found = 1; |
| free_index = i; |
| break; |
| } |
| } |
| if (!free_index_found) |
| { |
| printk(KERN_WARNING "cciss: unable to find free slot for disk\n"); |
| return -1; |
| } |
| |
| logvol = free_index; |
| hba[ctlr]->drv[logvol].LunID = lunid; |
| /* there could be gaps in lun numbers, track hightest */ |
| if(hba[ctlr]->highest_lun < lunid) |
| hba[ctlr]->highest_lun = logvol; |
| |
| memset(size_buff, 0, sizeof(ReadCapdata_struct)); |
| return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, size_buff, |
| sizeof( ReadCapdata_struct), 1, logvol, 0 ); |
| if (return_code == IO_OK) |
| { |
| total_size = (0xff & |
| (unsigned int)(size_buff->total_size[0])) << 24; |
| total_size |= (0xff & |
| (unsigned int)(size_buff->total_size[1])) << 16; |
| total_size |= (0xff & |
| (unsigned int)(size_buff->total_size[2])) << 8; |
| total_size |= (0xff & (unsigned int) |
| (size_buff->total_size[3])); |
| total_size++; // command returns highest block address |
| |
| block_size = (0xff & |
| (unsigned int)(size_buff->block_size[0])) << 24; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[1])) << 16; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[2])) << 8; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[3])); |
| } else /* read capacity command failed */ |
| { |
| printk(KERN_WARNING "cciss: read capacity failed\n"); |
| total_size = 0; |
| block_size = BLOCK_SIZE; |
| } |
| printk(KERN_INFO " blocks= %d block_size= %d\n", |
| total_size, block_size); |
| /* Execute the command to read the disk geometry */ |
| memset(inq_buff, 0, sizeof(InquiryData_struct)); |
| return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff, |
| sizeof(InquiryData_struct), 1, logvol ,0xC1 ); |
| if (return_code == IO_OK) |
| { |
| if(inq_buff->data_byte[8] == 0xFF) |
| { |
| printk(KERN_WARNING "cciss: reading geometry failed, " |
| "volume does not support reading geometry\n"); |
| |
| hba[ctlr]->drv[logvol].block_size = block_size; |
| hba[ctlr]->drv[logvol].nr_blocks = total_size; |
| hba[ctlr]->drv[logvol].heads = 255; |
| hba[ctlr]->drv[logvol].sectors = 32; // Sectors per track |
| hba[ctlr]->drv[logvol].cylinders = total_size / 255 / 32; |
| } else |
| { |
| |
| hba[ctlr]->drv[logvol].block_size = block_size; |
| hba[ctlr]->drv[logvol].nr_blocks = total_size; |
| hba[ctlr]->drv[logvol].heads = |
| inq_buff->data_byte[6]; |
| hba[ctlr]->drv[logvol].sectors = |
| inq_buff->data_byte[7]; |
| hba[ctlr]->drv[logvol].cylinders = |
| (inq_buff->data_byte[4] & 0xff) << 8; |
| hba[ctlr]->drv[logvol].cylinders += |
| inq_buff->data_byte[5]; |
| } |
| } |
| else /* Get geometry failed */ |
| { |
| |
| printk(KERN_WARNING "cciss: reading geometry failed, " |
| "continuing with default geometry\n"); |
| |
| hba[ctlr]->drv[logvol].block_size = block_size; |
| hba[ctlr]->drv[logvol].nr_blocks = total_size; |
| hba[ctlr]->drv[logvol].heads = 255; |
| hba[ctlr]->drv[logvol].sectors = 32; // Sectors per track |
| hba[ctlr]->drv[logvol].cylinders = total_size / 255 / 32; |
| } |
| printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n", |
| hba[ctlr]->drv[logvol].heads, |
| hba[ctlr]->drv[logvol].sectors, |
| hba[ctlr]->drv[logvol].cylinders); |
| hba[ctlr]->drv[logvol].usage_count = 0; |
| max_p = 1 << gdev->minor_shift; |
| start = logvol<< gdev->minor_shift; |
| |
| for(i=max_p-1; i>=0; i--) { |
| int minor = start+i; |
| kdev = mk_kdev(MAJOR_NR + ctlr, minor); |
| invalidate_device(kdev, 1); |
| gdev->part[minor].start_sect = 0; |
| gdev->part[minor].nr_sects = 0; |
| |
| /* reset the blocksize so we can read the partition table */ |
| blksize_size[MAJOR_NR+ctlr][minor] = 1024; |
| } |
| |
| ++hba[ctlr]->num_luns; |
| gdev->nr_real = hba[ctlr]->highest_lun + 1; |
| /* setup partitions per disk */ |
| kdev = mk_kdev(MAJOR_NR + ctlr, logvol<< gdev->minor_shift); |
| grok_partitions(kdev, hba[ctlr]->drv[logvol].nr_blocks); |
| |
| kfree(ld_buff); |
| kfree(size_buff); |
| kfree(inq_buff); |
| return (logvol); |
| } |
| /* |
| * Wait polling for a command to complete. |
| * The memory mapped FIFO is polled for the completion. |
| * Used only at init time, interrupts disabled. |
| */ |
| static unsigned long pollcomplete(int ctlr) |
| { |
| unsigned long done; |
| int i; |
| |
| /* Wait (up to 2 seconds) for a command to complete */ |
| |
| for (i = 200000; i > 0; i--) { |
| done = hba[ctlr]->access.command_completed(hba[ctlr]); |
| if (done == FIFO_EMPTY) { |
| udelay(10); /* a short fixed delay */ |
| } else |
| return (done); |
| } |
| /* Invalid address to tell caller we ran out of time */ |
| return 1; |
| } |
| /* |
| * Send a command to the controller, and wait for it to complete. |
| * Only used at init time. |
| */ |
| static int sendcmd( |
| __u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int use_unit_num, /* 0: address the controller, |
| 1: address logical volume log_unit, |
| 2: periph device address is scsi3addr */ |
| unsigned int log_unit, |
| __u8 page_code, |
| unsigned char *scsi3addr) |
| { |
| CommandList_struct *c; |
| int i; |
| unsigned long complete; |
| ctlr_info_t *info_p= hba[ctlr]; |
| u64bit buff_dma_handle; |
| |
| c = cmd_alloc(info_p, 1); |
| if (c == NULL) |
| { |
| printk(KERN_WARNING "cciss: unable to get memory"); |
| return(IO_ERROR); |
| } |
| // Fill in Command Header |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| if( buff != NULL) // buffer to fill |
| { |
| c->Header.SGList = 1; |
| c->Header.SGTotal= 1; |
| } else // no buffers to fill |
| { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag |
| // Fill in Request block |
| switch(cmd) |
| { |
| case CISS_INQUIRY: |
| /* If the logical unit number is 0 then, this is going |
| to controller so It's a physical command |
| mode = 0 target = 0. |
| So we have nothing to write. |
| otherwise, if use_unit_num == 1, |
| mode = 1(volume set addressing) target = LUNID |
| otherwise, if use_unit_num == 2, |
| mode = 0(periph dev addr) target = scsi3addr |
| */ |
| if(use_unit_num == 1) |
| { |
| c->Header.LUN.LogDev.VolId= |
| hba[ctlr]->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| } |
| else if (use_unit_num == 2) |
| { |
| memcpy(c->Header.LUN.LunAddrBytes,scsi3addr,8); |
| c->Header.LUN.LogDev.Mode = 0; // phys dev addr |
| } |
| |
| /* are we trying to read a vital product page */ |
| if(page_code != 0) |
| { |
| c->Request.CDB[1] = 0x01; |
| c->Request.CDB[2] = page_code; |
| } |
| c->Request.CDBLen = 6; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = CISS_INQUIRY; |
| c->Request.CDB[4] = size & 0xFF; |
| break; |
| case CISS_REPORT_LOG: |
| case CISS_REPORT_PHYS: |
| /* Talking to controller so It's a physical command |
| mode = 00 target = 0. |
| So we have nothing to write. |
| */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = cmd; |
| c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB |
| c->Request.CDB[7] = (size >> 16) & 0xFF; |
| c->Request.CDB[8] = (size >> 8) & 0xFF; |
| c->Request.CDB[9] = size & 0xFF; |
| break; |
| |
| case CCISS_READ_CAPACITY: |
| c->Header.LUN.LogDev.VolId= |
| hba[ctlr]->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| c->Request.CDBLen = 10; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; // Read |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = CCISS_READ_CAPACITY; |
| break; |
| case CCISS_CACHE_FLUSH: |
| c->Request.CDBLen = 12; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; // No data |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = BMIC_WRITE; // BMIC Passthru |
| c->Request.CDB[6] = BMIC_CACHE_FLUSH; |
| break; |
| default: |
| printk(KERN_WARNING |
| "cciss: Unknown Command 0x%c sent attempted\n", |
| cmd); |
| cmd_free(info_p, c, 1); |
| return(IO_ERROR); |
| }; |
| // Fill in the scatter gather information |
| if (size > 0 ) |
| { |
| buff_dma_handle.val = (__u64) pci_map_single( info_p->pdev, |
| buff, size, PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = buff_dma_handle.val32.lower; |
| c->SG[0].Addr.upper = buff_dma_handle.val32.upper; |
| c->SG[0].Len = size; |
| c->SG[0].Ext = 0; // we are not chaining |
| } |
| /* |
| * Disable interrupt |
| */ |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: turning intr off\n"); |
| #endif /* CCISS_DEBUG */ |
| info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF); |
| |
| /* Make sure there is room in the command FIFO */ |
| /* Actually it should be completely empty at this time. */ |
| for (i = 200000; i > 0; i--) |
| { |
| /* if fifo isn't full go */ |
| if (!(info_p->access.fifo_full(info_p))) |
| { |
| |
| break; |
| } |
| udelay(10); |
| printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," |
| " waiting!\n", ctlr); |
| } |
| /* |
| * Send the cmd |
| */ |
| info_p->access.submit_command(info_p, c); |
| complete = pollcomplete(ctlr); |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: command completed\n"); |
| #endif /* CCISS_DEBUG */ |
| |
| /* unlock the data buffer from DMA */ |
| pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val, |
| size, PCI_DMA_BIDIRECTIONAL); |
| if (complete != 1) { |
| if ( (complete & CISS_ERROR_BIT) |
| && (complete & ~CISS_ERROR_BIT) == c->busaddr) |
| { |
| /* if data overrun or underun on Report command |
| ignore it |
| */ |
| if (((c->Request.CDB[0] == CISS_REPORT_LOG) || |
| (c->Request.CDB[0] == CISS_REPORT_PHYS) || |
| (c->Request.CDB[0] == CISS_INQUIRY)) && |
| ((c->err_info->CommandStatus == |
| CMD_DATA_OVERRUN) || |
| (c->err_info->CommandStatus == |
| CMD_DATA_UNDERRUN) |
| )) |
| { |
| complete = c->busaddr; |
| } else |
| { |
| printk(KERN_WARNING "ciss ciss%d: sendcmd" |
| " Error %x \n", ctlr, |
| c->err_info->CommandStatus); |
| printk(KERN_WARNING "ciss ciss%d: sendcmd" |
| " offensive info\n" |
| " size %x\n num %x value %x\n", ctlr, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_size, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_num, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_value); |
| cmd_free(info_p,c, 1); |
| return(IO_ERROR); |
| } |
| } |
| if (complete != c->busaddr) { |
| printk( KERN_WARNING "cciss cciss%d: SendCmd " |
| "Invalid command list address returned! (%lx)\n", |
| ctlr, complete); |
| cmd_free(info_p, c, 1); |
| return (IO_ERROR); |
| } |
| } else { |
| printk( KERN_WARNING |
| "cciss cciss%d: SendCmd Timeout out, " |
| "No command list address returned!\n", |
| ctlr); |
| cmd_free(info_p, c, 1); |
| return (IO_ERROR); |
| } |
| cmd_free(info_p, c, 1); |
| return (IO_OK); |
| } |
| /* |
| * Map (physical) PCI mem into (virtual) kernel space |
| */ |
| static ulong remap_pci_mem(ulong base, ulong size) |
| { |
| ulong page_base = ((ulong) base) & PAGE_MASK; |
| ulong page_offs = ((ulong) base) - page_base; |
| ulong page_remapped = (ulong) ioremap(page_base, page_offs+size); |
| |
| return (ulong) (page_remapped ? (page_remapped + page_offs) : 0UL); |
| } |
| |
| /* |
| * Enqueuing and dequeuing functions for cmdlists. |
| */ |
| static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c) |
| { |
| if (*Qptr == NULL) { |
| *Qptr = c; |
| c->next = c->prev = c; |
| } else { |
| c->prev = (*Qptr)->prev; |
| c->next = (*Qptr); |
| (*Qptr)->prev->next = c; |
| (*Qptr)->prev = c; |
| } |
| } |
| |
| static inline CommandList_struct *removeQ(CommandList_struct **Qptr, |
| CommandList_struct *c) |
| { |
| if (c && c->next != c) { |
| if (*Qptr == c) *Qptr = c->next; |
| c->prev->next = c->next; |
| c->next->prev = c->prev; |
| } else { |
| *Qptr = NULL; |
| } |
| return c; |
| } |
| |
| /* |
| * Takes jobs of the Q and sends them to the hardware, then puts it on |
| * the Q to wait for completion. |
| */ |
| static void start_io( ctlr_info_t *h) |
| { |
| CommandList_struct *c; |
| |
| while(( c = h->reqQ) != NULL ) |
| { |
| /* can't do anything if fifo is full */ |
| if ((h->access.fifo_full(h))) { |
| printk(KERN_WARNING "cciss: fifo full\n"); |
| break; |
| } |
| |
| /* Get the frist entry from the Request Q */ |
| removeQ(&(h->reqQ), c); |
| h->Qdepth--; |
| |
| /* Tell the controller execute command */ |
| h->access.submit_command(h, c); |
| |
| /* Put job onto the completed Q */ |
| addQ (&(h->cmpQ), c); |
| } |
| } |
| |
| static inline void complete_buffers(struct bio *bio, int status) |
| { |
| while (bio) { |
| struct bio *xbh = bio->bi_next; |
| |
| bio->bi_next = NULL; |
| blk_finished_io(bio_sectors(bio)); |
| bio_endio(bio, status); |
| bio = xbh; |
| } |
| |
| } |
| /* checks the status of the job and calls complete buffers to mark all |
| * buffers for the completed job. |
| */ |
| static inline void complete_command( CommandList_struct *cmd, int timeout) |
| { |
| int status = 1; |
| int i; |
| u64bit temp64; |
| |
| if (timeout) |
| status = 0; |
| /* unmap the DMA mapping for all the scatter gather elements */ |
| for(i=0; i<cmd->Header.SGList; i++) |
| { |
| temp64.val32.lower = cmd->SG[i].Addr.lower; |
| temp64.val32.upper = cmd->SG[i].Addr.upper; |
| pci_unmap_page(hba[cmd->ctlr]->pdev, |
| temp64.val, cmd->SG[i].Len, |
| (cmd->Request.Type.Direction == XFER_READ) ? |
| PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); |
| } |
| |
| if(cmd->err_info->CommandStatus != 0) |
| { /* an error has occurred */ |
| switch(cmd->err_info->CommandStatus) |
| { |
| unsigned char sense_key; |
| case CMD_TARGET_STATUS: |
| status = 0; |
| |
| if( cmd->err_info->ScsiStatus == 0x02) |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has CHECK CONDITION " |
| " byte 2 = 0x%x\n", cmd, |
| cmd->err_info->SenseInfo[2] |
| ); |
| /* check the sense key */ |
| sense_key = 0xf & |
| cmd->err_info->SenseInfo[2]; |
| /* no status or recovered error */ |
| if((sense_key == 0x0) || |
| (sense_key == 0x1)) |
| { |
| status = 1; |
| } |
| } else |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has SCSI Status 0x%x\n", |
| cmd, cmd->err_info->ScsiStatus); |
| } |
| break; |
| case CMD_DATA_UNDERRUN: |
| printk(KERN_WARNING "cciss: cmd %p has" |
| " completed with data underrun " |
| "reported\n", cmd); |
| break; |
| case CMD_DATA_OVERRUN: |
| printk(KERN_WARNING "cciss: cmd %p has" |
| " completed with data overrun " |
| "reported\n", cmd); |
| break; |
| case CMD_INVALID: |
| printk(KERN_WARNING "cciss: cmd %p is " |
| "reported invalid\n", cmd); |
| status = 0; |
| break; |
| case CMD_PROTOCOL_ERR: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| "protocol error \n", cmd); |
| status = 0; |
| break; |
| case CMD_HARDWARE_ERR: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| " hardware error\n", cmd); |
| status = 0; |
| break; |
| case CMD_CONNECTION_LOST: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| "connection lost\n", cmd); |
| status=0; |
| break; |
| case CMD_ABORTED: |
| printk(KERN_WARNING "cciss: cmd %p was " |
| "aborted\n", cmd); |
| status=0; |
| break; |
| case CMD_ABORT_FAILED: |
| printk(KERN_WARNING "cciss: cmd %p reports " |
| "abort failed\n", cmd); |
| status=0; |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| printk(KERN_WARNING "cciss: cmd %p aborted " |
| "do to an unsolicited abort\n", cmd); |
| status=0; |
| break; |
| case CMD_TIMEOUT: |
| printk(KERN_WARNING "cciss: cmd %p timedout\n", |
| cmd); |
| status=0; |
| break; |
| default: |
| printk(KERN_WARNING "cciss: cmd %p returned " |
| "unknown status %x\n", cmd, |
| cmd->err_info->CommandStatus); |
| status=0; |
| } |
| } |
| |
| complete_buffers(cmd->rq->bio, status); |
| |
| #ifdef CCISS_DEBUG |
| printk("Done with %p\n", cmd->rq); |
| #endif /* CCISS_DEBUG */ |
| |
| end_that_request_last(cmd->rq); |
| } |
| |
| /* |
| * Get a request and submit it to the controller. |
| */ |
| static void do_cciss_request(request_queue_t *q) |
| { |
| ctlr_info_t *h= q->queuedata; |
| CommandList_struct *c; |
| int log_unit, start_blk, seg; |
| struct request *creq; |
| u64bit temp64; |
| struct scatterlist tmp_sg[MAXSGENTRIES]; |
| int i, dir; |
| |
| if (blk_queue_plugged(q)) |
| goto startio; |
| |
| queue: |
| if (blk_queue_empty(q)) |
| goto startio; |
| |
| creq = elv_next_request(q); |
| if (creq->nr_phys_segments > MAXSGENTRIES) |
| BUG(); |
| |
| if (h->ctlr != major(creq->rq_dev)-MAJOR_NR ) |
| { |
| printk(KERN_WARNING "doreq cmd for %d, %x at %p\n", |
| h->ctlr, major(creq->rq_dev), creq); |
| blkdev_dequeue_request(creq); |
| complete_buffers(creq->bio, 0); |
| end_that_request_last(creq); |
| goto startio; |
| } |
| |
| if (( c = cmd_alloc(h, 1)) == NULL) |
| goto startio; |
| |
| blkdev_dequeue_request(creq); |
| |
| spin_unlock_irq(q->queue_lock); |
| |
| c->cmd_type = CMD_RWREQ; |
| c->rq = creq; |
| |
| /* fill in the request */ |
| log_unit = minor(creq->rq_dev) >> NWD_SHIFT; |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| c->Header.Tag.lower = c->busaddr; // use the physical address the cmd block for tag |
| c->Header.LUN.LogDev.VolId= hba[h->ctlr]->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| c->Request.CDBLen = 10; // 12 byte commands not in FW yet; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = |
| (rq_data_dir(creq) == READ) ? XFER_READ: XFER_WRITE; |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = (rq_data_dir(creq) == READ) ? CCISS_READ : CCISS_WRITE; |
| start_blk = creq->sector; |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",(int) creq->sector, |
| (int) creq->nr_sectors); |
| #endif /* CCISS_DEBUG */ |
| |
| seg = blk_rq_map_sg(q, creq, tmp_sg); |
| |
| /* get the DMA records for the setup */ |
| if (c->Request.Type.Direction == XFER_READ) |
| dir = PCI_DMA_FROMDEVICE; |
| else |
| dir = PCI_DMA_TODEVICE; |
| |
| for (i=0; i<seg; i++) |
| { |
| c->SG[i].Len = tmp_sg[i].length; |
| temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page, |
| tmp_sg[i].offset, tmp_sg[i].length, |
| dir); |
| c->SG[i].Addr.lower = temp64.val32.lower; |
| c->SG[i].Addr.upper = temp64.val32.upper; |
| c->SG[i].Ext = 0; // we are not chaining |
| } |
| /* track how many SG entries we are using */ |
| if( seg > h->maxSG) |
| h->maxSG = seg; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); |
| #endif /* CCISS_DEBUG */ |
| |
| c->Header.SGList = c->Header.SGTotal = seg; |
| c->Request.CDB[1]= 0; |
| c->Request.CDB[2]= (start_blk >> 24) & 0xff; //MSB |
| c->Request.CDB[3]= (start_blk >> 16) & 0xff; |
| c->Request.CDB[4]= (start_blk >> 8) & 0xff; |
| c->Request.CDB[5]= start_blk & 0xff; |
| c->Request.CDB[6]= 0; // (sect >> 24) & 0xff; MSB |
| c->Request.CDB[7]= (creq->nr_sectors >> 8) & 0xff; |
| c->Request.CDB[8]= creq->nr_sectors & 0xff; |
| c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; |
| |
| spin_lock_irq(q->queue_lock); |
| |
| addQ(&(h->reqQ),c); |
| h->Qdepth++; |
| if(h->Qdepth > h->maxQsinceinit) |
| h->maxQsinceinit = h->Qdepth; |
| |
| goto queue; |
| startio: |
| start_io(h); |
| } |
| |
| static void do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| ctlr_info_t *h = dev_id; |
| CommandList_struct *c; |
| unsigned long flags; |
| __u32 a, a1; |
| |
| |
| /* Is this interrupt for us? */ |
| if ( h->access.intr_pending(h) == 0) |
| return; |
| |
| /* |
| * If there are completed commands in the completion queue, |
| * we had better do something about it. |
| */ |
| spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); |
| while( h->access.intr_pending(h)) |
| { |
| while((a = h->access.command_completed(h)) != FIFO_EMPTY) |
| { |
| a1 = a; |
| a &= ~3; |
| if ((c = h->cmpQ) == NULL) |
| { |
| printk(KERN_WARNING "cciss: Completion of %08lx ignored\n", (unsigned long)a1); |
| continue; |
| } |
| while(c->busaddr != a) { |
| c = c->next; |
| if (c == h->cmpQ) |
| break; |
| } |
| /* |
| * If we've found the command, take it off the |
| * completion Q and free it |
| */ |
| if (c->busaddr == a) { |
| removeQ(&h->cmpQ, c); |
| if (c->cmd_type == CMD_RWREQ) { |
| complete_command(c, 0); |
| cmd_free(h, c, 1); |
| } else if (c->cmd_type == CMD_IOCTL_PEND) { |
| complete(c->waiting); |
| } |
| # ifdef CONFIG_CISS_SCSI_TAPE |
| else if (c->cmd_type == CMD_SCSI) |
| complete_scsi_command(c, 0, a1); |
| # endif |
| continue; |
| } |
| } |
| } |
| |
| /* |
| * See if we can queue up some more IO |
| */ |
| do_cciss_request(BLK_DEFAULT_QUEUE(MAJOR_NR + h->ctlr)); |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| } |
| /* |
| * We cannot read the structure directly, for portablity we must use |
| * the io functions. |
| * This is for debug only. |
| */ |
| #ifdef CCISS_DEBUG |
| static void print_cfg_table( CfgTable_struct *tb) |
| { |
| int i; |
| char temp_name[17]; |
| |
| printk("Controller Configuration information\n"); |
| printk("------------------------------------\n"); |
| for(i=0;i<4;i++) |
| temp_name[i] = readb(&(tb->Signature[i])); |
| temp_name[4]='\0'; |
| printk(" Signature = %s\n", temp_name); |
| printk(" Spec Number = %d\n", readl(&(tb->SpecValence))); |
| printk(" Transport methods supported = 0x%x\n", |
| readl(&(tb-> TransportSupport))); |
| printk(" Transport methods active = 0x%x\n", |
| readl(&(tb->TransportActive))); |
| printk(" Requested transport Method = 0x%x\n", |
| readl(&(tb->HostWrite.TransportRequest))); |
| printk(" Coalese Interrupt Delay = 0x%x\n", |
| readl(&(tb->HostWrite.CoalIntDelay))); |
| printk(" Coalese Interrupt Count = 0x%x\n", |
| readl(&(tb->HostWrite.CoalIntCount))); |
| printk(" Max outstanding commands = 0x%d\n", |
| readl(&(tb->CmdsOutMax))); |
| printk(" Bus Types = 0x%x\n", readl(&(tb-> BusTypes))); |
| for(i=0;i<16;i++) |
| temp_name[i] = readb(&(tb->ServerName[i])); |
| temp_name[16] = '\0'; |
| printk(" Server Name = %s\n", temp_name); |
| printk(" Heartbeat Counter = 0x%x\n\n\n", |
| readl(&(tb->HeartBeat))); |
| } |
| #endif /* CCISS_DEBUG */ |
| |
| static void release_io_mem(ctlr_info_t *c) |
| { |
| /* if IO mem was not protected do nothing */ |
| if( c->io_mem_addr == 0) |
| return; |
| release_region(c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr = 0; |
| c->io_mem_length = 0; |
| } |
| static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) |
| { |
| ushort vendor_id, device_id, command; |
| unchar cache_line_size, latency_timer; |
| unchar irq, revision; |
| uint addr[6]; |
| __u32 board_id; |
| int cfg_offset; |
| int cfg_base_addr; |
| int cfg_base_addr_index; |
| int i; |
| |
| vendor_id = pdev->vendor; |
| device_id = pdev->device; |
| irq = pdev->irq; |
| |
| for(i=0; i<6; i++) |
| addr[i] = pdev->resource[i].start; |
| |
| if (pci_enable_device(pdev)) |
| { |
| printk(KERN_ERR "cciss: Unable to Enable PCI device\n"); |
| return( -1); |
| } |
| if (pci_set_dma_mask(pdev, CCISS_DMA_MASK ) != 0) |
| { |
| printk(KERN_ERR "cciss: Unable to set DMA mask\n"); |
| return(-1); |
| } |
| |
| (void) pci_read_config_word(pdev, PCI_COMMAND,&command); |
| (void) pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); |
| (void) pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, |
| &cache_line_size); |
| (void) pci_read_config_byte(pdev, PCI_LATENCY_TIMER, |
| &latency_timer); |
| (void) pci_read_config_dword(pdev, PCI_SUBSYSTEM_VENDOR_ID, |
| &board_id); |
| |
| /* check to see if controller has been disabled */ |
| if(!(command & 0x02)) |
| { |
| printk(KERN_WARNING "cciss: controller appears to be disabled\n"); |
| return(-1); |
| } |
| |
| /* search for our IO range so we can protect it */ |
| for(i=0; i<6; i++) |
| { |
| /* is this an IO range */ |
| if( pdev->resource[i].flags & 0x01 ) |
| { |
| c->io_mem_addr = pdev->resource[i].start; |
| c->io_mem_length = pdev->resource[i].end - |
| pdev->resource[i].start +1; |
| #ifdef CCISS_DEBUG |
| printk("IO value found base_addr[%d] %lx %lx\n", i, |
| c->io_mem_addr, c->io_mem_length); |
| #endif /* CCISS_DEBUG */ |
| /* register the IO range */ |
| if(!request_region( c->io_mem_addr, |
| c->io_mem_length, "cciss")) |
| { |
| printk(KERN_WARNING "cciss I/O memory range already in use addr=%lx length=%ld\n", |
| c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr= 0; |
| c->io_mem_length = 0; |
| } |
| break; |
| } |
| } |
| |
| #ifdef CCISS_DEBUG |
| printk("vendor_id = %x\n", vendor_id); |
| printk("device_id = %x\n", device_id); |
| printk("command = %x\n", command); |
| for(i=0; i<6; i++) |
| printk("addr[%d] = %x\n", i, addr[i]); |
| printk("revision = %x\n", revision); |
| printk("irq = %x\n", irq); |
| printk("cache_line_size = %x\n", cache_line_size); |
| printk("latency_timer = %x\n", latency_timer); |
| printk("board_id = %x\n", board_id); |
| #endif /* CCISS_DEBUG */ |
| |
| c->intr = irq; |
| |
| /* |
| * Memory base addr is first addr , the second points to the config |
| * table |
| */ |
| |
| c->paddr = addr[0] ; /* addressing mode bits already removed */ |
| #ifdef CCISS_DEBUG |
| printk("address 0 = %x\n", c->paddr); |
| #endif /* CCISS_DEBUG */ |
| c->vaddr = remap_pci_mem(c->paddr, 200); |
| |
| /* get the address index number */ |
| cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET); |
| /* I am not prepared to deal with a 64 bit address value */ |
| cfg_base_addr &= 0xffff; |
| #ifdef CCISS_DEBUG |
| printk("cfg base address = %x\n", cfg_base_addr); |
| #endif /* CCISS_DEBUG */ |
| cfg_base_addr_index = (cfg_base_addr - PCI_BASE_ADDRESS_0)/4; |
| #ifdef CCISS_DEBUG |
| printk("cfg base address index = %x\n", cfg_base_addr_index); |
| #endif /* CCISS_DEBUG */ |
| |
| cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); |
| #ifdef CCISS_DEBUG |
| printk("cfg offset = %x\n", cfg_offset); |
| #endif /* CCISS_DEBUG */ |
| c->cfgtable = (CfgTable_struct *) |
| remap_pci_mem((addr[cfg_base_addr_index] & 0xfffffff0) |
| + cfg_offset, sizeof(CfgTable_struct)); |
| c->board_id = board_id; |
| |
| #ifdef CCISS_DEBUG |
| print_cfg_table(c->cfgtable); |
| #endif /* CCISS_DEBUG */ |
| |
| for(i=0; i<NR_PRODUCTS; i++) { |
| if (board_id == products[i].board_id) { |
| c->product_name = products[i].product_name; |
| c->access = *(products[i].access); |
| break; |
| } |
| } |
| if (i == NR_PRODUCTS) { |
| printk(KERN_WARNING "cciss: Sorry, I don't know how" |
| " to access the Smart Array controller %08lx\n", |
| (unsigned long)board_id); |
| return -1; |
| } |
| if ( (readb(&c->cfgtable->Signature[0]) != 'C') || |
| (readb(&c->cfgtable->Signature[1]) != 'I') || |
| (readb(&c->cfgtable->Signature[2]) != 'S') || |
| (readb(&c->cfgtable->Signature[3]) != 'S') ) |
| { |
| printk("Does not appear to be a valid CISS config table\n"); |
| return -1; |
| } |
| #ifdef CCISS_DEBUG |
| printk("Trying to put board into Simple mode\n"); |
| #endif /* CCISS_DEBUG */ |
| c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); |
| /* Update the field, and then ring the doorbell */ |
| writel( CFGTBL_Trans_Simple, |
| &(c->cfgtable->HostWrite.TransportRequest)); |
| writel( CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); |
| |
| for(i=0;i<MAX_CONFIG_WAIT;i++) |
| { |
| if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| udelay(1000); |
| } |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "I counter got to %d %x\n", i, readl(c->vaddr + SA5_DOORBELL)); |
| #endif /* CCISS_DEBUG */ |
| #ifdef CCISS_DEBUG |
| print_cfg_table(c->cfgtable); |
| #endif /* CCISS_DEBUG */ |
| |
| if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) |
| { |
| printk(KERN_WARNING "cciss: unable to get board into" |
| " simple mode\n"); |
| return -1; |
| } |
| return 0; |
| |
| } |
| |
| /* |
| * Gets information about the local volumes attached to the controller. |
| */ |
| static void cciss_getgeometry(int cntl_num) |
| { |
| ReportLunData_struct *ld_buff; |
| ReadCapdata_struct *size_buff; |
| InquiryData_struct *inq_buff; |
| int return_code; |
| int i; |
| int listlength = 0; |
| __u32 lunid = 0; |
| int block_size; |
| int total_size; |
| |
| ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL); |
| if (ld_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| return; |
| } |
| memset(ld_buff, 0, sizeof(ReportLunData_struct)); |
| size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); |
| if (size_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| kfree(ld_buff); |
| return; |
| } |
| inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); |
| if (inq_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| kfree(ld_buff); |
| kfree(size_buff); |
| return; |
| } |
| /* Get the firmware version */ |
| return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, |
| sizeof(InquiryData_struct), 0, 0 ,0, NULL ); |
| if (return_code == IO_OK) |
| { |
| hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32]; |
| hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33]; |
| hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34]; |
| hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35]; |
| } else /* send command failed */ |
| { |
| printk(KERN_WARNING "cciss: unable to determine firmware" |
| " version of controller\n"); |
| } |
| /* Get the number of logical volumes */ |
| return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff, |
| sizeof(ReportLunData_struct), 0, 0, 0, NULL ); |
| |
| if( return_code == IO_OK) |
| { |
| #ifdef CCISS_DEBUG |
| printk("LUN Data\n--------------------------\n"); |
| #endif /* CCISS_DEBUG */ |
| |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; |
| listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); |
| } else /* reading number of logical volumes failed */ |
| { |
| printk(KERN_WARNING "cciss: report logical volume" |
| " command failed\n"); |
| listlength = 0; |
| } |
| hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry |
| if (hba[cntl_num]->num_luns > CISS_MAX_LUN) |
| { |
| printk(KERN_ERR "ciss: only %d number of logical volumes supported\n", |
| CISS_MAX_LUN); |
| hba[cntl_num]->num_luns = CISS_MAX_LUN; |
| } |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0], |
| ld_buff->LUNListLength[1], ld_buff->LUNListLength[2], |
| ld_buff->LUNListLength[3], hba[cntl_num]->num_luns); |
| #endif /* CCISS_DEBUG */ |
| |
| hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns-1; |
| for(i=0; i< hba[cntl_num]->num_luns; i++) |
| { |
| |
| lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24; |
| lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16; |
| lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8; |
| lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); |
| |
| hba[cntl_num]->drv[i].LunID = lunid; |
| |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i, |
| ld_buff->LUN[i][0], ld_buff->LUN[i][1],ld_buff->LUN[i][2], |
| ld_buff->LUN[i][3], hba[cntl_num]->drv[i].LunID); |
| #endif /* CCISS_DEBUG */ |
| |
| memset(size_buff, 0, sizeof(ReadCapdata_struct)); |
| return_code = sendcmd(CCISS_READ_CAPACITY, cntl_num, size_buff, |
| sizeof( ReadCapdata_struct), 1, i, 0, NULL ); |
| if (return_code == IO_OK) |
| { |
| total_size = (0xff & |
| (unsigned int)(size_buff->total_size[0])) << 24; |
| total_size |= (0xff & |
| (unsigned int)(size_buff->total_size[1])) << 16; |
| total_size |= (0xff & |
| (unsigned int)(size_buff->total_size[2])) << 8; |
| total_size |= (0xff & (unsigned int) |
| (size_buff->total_size[3])); |
| total_size++; // command returns highest block address |
| |
| block_size = (0xff & |
| (unsigned int)(size_buff->block_size[0])) << 24; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[1])) << 16; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[2])) << 8; |
| block_size |= (0xff & |
| (unsigned int)(size_buff->block_size[3])); |
| } else /* read capacity command failed */ |
| { |
| printk(KERN_WARNING "cciss: read capacity failed\n"); |
| total_size = 0; |
| block_size = BLOCK_SIZE; |
| } |
| printk(KERN_INFO " blocks= %d block_size= %d\n", |
| total_size, block_size); |
| |
| /* Execute the command to read the disk geometry */ |
| memset(inq_buff, 0, sizeof(InquiryData_struct)); |
| return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, |
| sizeof(InquiryData_struct), 1, i ,0xC1, NULL ); |
| if (return_code == IO_OK) |
| { |
| if(inq_buff->data_byte[8] == 0xFF) |
| { |
| printk(KERN_WARNING "cciss: reading geometry failed, volume does not support reading geometry\n"); |
| |
| hba[cntl_num]->drv[i].block_size = block_size; |
| hba[cntl_num]->drv[i].nr_blocks = total_size; |
| hba[cntl_num]->drv[i].heads = 255; |
| hba[cntl_num]->drv[i].sectors = 32; // Sectors per track |
| hba[cntl_num]->drv[i].cylinders = total_size / 255 / 32; } else |
| { |
| |
| hba[cntl_num]->drv[i].block_size = block_size; |
| hba[cntl_num]->drv[i].nr_blocks = total_size; |
| hba[cntl_num]->drv[i].heads = |
| inq_buff->data_byte[6]; |
| hba[cntl_num]->drv[i].sectors = |
| inq_buff->data_byte[7]; |
| hba[cntl_num]->drv[i].cylinders = |
| (inq_buff->data_byte[4] & 0xff) << 8; |
| hba[cntl_num]->drv[i].cylinders += |
| inq_buff->data_byte[5]; |
| } |
| } |
| else /* Get geometry failed */ |
| { |
| printk(KERN_WARNING "cciss: reading geometry failed, continuing with default geometry\n"); |
| |
| hba[cntl_num]->drv[i].block_size = block_size; |
| hba[cntl_num]->drv[i].nr_blocks = total_size; |
| hba[cntl_num]->drv[i].heads = 255; |
| hba[cntl_num]->drv[i].sectors = 32; // Sectors per track |
| hba[cntl_num]->drv[i].cylinders = total_size / 255 / 32; |
| } |
| printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n", |
| hba[cntl_num]->drv[i].heads, |
| hba[cntl_num]->drv[i].sectors, |
| hba[cntl_num]->drv[i].cylinders); |
| |
| } |
| kfree(ld_buff); |
| kfree(size_buff); |
| kfree(inq_buff); |
| } |
| |
| /* Function to find the first free pointer into our hba[] array */ |
| /* Returns -1 if no free entries are left. */ |
| static int alloc_cciss_hba(void) |
| { |
| int i; |
| for(i=0; i< MAX_CTLR; i++) |
| { |
| if (hba[i] == NULL) |
| { |
| hba[i] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL); |
| if(hba[i]==NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory.\n"); |
| return (-1); |
| } |
| return (i); |
| } |
| } |
| printk(KERN_WARNING "cciss: This driver supports a maximum" |
| " of 8 controllers.\n"); |
| return(-1); |
| } |
| |
| static void free_hba(int i) |
| { |
| kfree(hba[i]); |
| hba[i]=NULL; |
| } |
| |
| /* |
| * This is it. Find all the controllers and register them. I really hate |
| * stealing all these major device numbers. |
| * returns the number of block devices registered. |
| */ |
| static int __init cciss_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| request_queue_t *q; |
| int i; |
| int j; |
| |
| printk(KERN_DEBUG "cciss: Device 0x%x has been found at" |
| " bus %d dev %d func %d\n", |
| pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn), |
| PCI_FUNC(pdev->devfn)); |
| i = alloc_cciss_hba(); |
| if( i < 0 ) |
| return (-1); |
| memset(hba[i], 0, sizeof(ctlr_info_t)); |
| if (cciss_pci_init(hba[i], pdev) != 0) |
| { |
| release_io_mem(hba[i]); |
| free_hba(i); |
| return (-1); |
| } |
| sprintf(hba[i]->devname, "cciss%d", i); |
| hba[i]->ctlr = i; |
| hba[i]->pdev = pdev; |
| |
| /* configure PCI DMA stuff */ |
| if (!pci_set_dma_mask(pdev, (u64) 0xffffffffffffffff)) |
| printk("cciss: using DAC cycles\n"); |
| else if (!pci_set_dma_mask(pdev, 0xffffffff)) |
| printk("cciss: not using DAC cycles\n"); |
| else { |
| printk("cciss: no suitable DMA available\n"); |
| free_hba(i); |
| return -ENODEV; |
| } |
| |
| if( register_blkdev(MAJOR_NR+i, hba[i]->devname, &cciss_fops)) |
| { |
| printk(KERN_ERR "cciss: Unable to get major number " |
| "%d for %s\n", MAJOR_NR+i, hba[i]->devname); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| return(-1); |
| } |
| /* make sure the board interrupts are off */ |
| hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF); |
| if( request_irq(hba[i]->intr, do_cciss_intr, |
| SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, |
| hba[i]->devname, hba[i])) |
| { |
| printk(KERN_ERR "ciss: Unable to get irq %d for %s\n", |
| hba[i]->intr, hba[i]->devname); |
| unregister_blkdev( MAJOR_NR+i, hba[i]->devname); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| return(-1); |
| } |
| hba[i]->cmd_pool_bits = (__u32*)kmalloc( |
| ((NR_CMDS+31)/32)*sizeof(__u32), GFP_KERNEL); |
| hba[i]->cmd_pool = (CommandList_struct *)pci_alloc_consistent( |
| hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct), |
| &(hba[i]->cmd_pool_dhandle)); |
| hba[i]->errinfo_pool = (ErrorInfo_struct *)pci_alloc_consistent( |
| hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct), |
| &(hba[i]->errinfo_pool_dhandle)); |
| if((hba[i]->cmd_pool_bits == NULL) |
| || (hba[i]->cmd_pool == NULL) |
| || (hba[i]->errinfo_pool == NULL)) |
| { |
| if(hba[i]->cmd_pool_bits) |
| kfree(hba[i]->cmd_pool_bits); |
| if(hba[i]->cmd_pool) |
| pci_free_consistent(hba[i]->pdev, |
| NR_CMDS * sizeof(CommandList_struct), |
| hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); |
| if(hba[i]->errinfo_pool) |
| pci_free_consistent(hba[i]->pdev, |
| NR_CMDS * sizeof( ErrorInfo_struct), |
| hba[i]->errinfo_pool, |
| hba[i]->errinfo_pool_dhandle); |
| free_irq(hba[i]->intr, hba[i]); |
| unregister_blkdev(MAJOR_NR+i, hba[i]->devname); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| printk( KERN_ERR "cciss: out of memory"); |
| return(-1); |
| } |
| |
| /* Initialize the pdev driver private data. |
| have it point to hba[i]. */ |
| pci_set_drvdata(pdev, hba[i]); |
| /* command and error info recs zeroed out before |
| they are used */ |
| memset(hba[i]->cmd_pool_bits, 0, ((NR_CMDS+31)/32)*sizeof(__u32)); |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n",i); |
| #endif /* CCISS_DEBUG */ |
| |
| cciss_getgeometry(i); |
| |
| cciss_find_non_disk_devices(i); /* find our tape drives, if any */ |
| |
| /* Turn the interrupts on so we can service requests */ |
| hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); |
| |
| cciss_procinit(i); |
| |
| q = BLK_DEFAULT_QUEUE(MAJOR_NR + i); |
| q->queuedata = hba[i]; |
| spin_lock_init(&hba[i]->lock); |
| blk_init_queue(q, do_cciss_request, &hba[i]->lock); |
| blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); |
| |
| /* This is a hardware imposed limit. */ |
| blk_queue_max_hw_segments(q, MAXSGENTRIES); |
| |
| /* This is a limit in the driver and could be eliminated. */ |
| blk_queue_max_phys_segments(q, MAXSGENTRIES); |
| |
| blk_queue_max_sectors(q, 512); |
| |
| /* fill in the other Kernel structs */ |
| blksize_size[MAJOR_NR+i] = hba[i]->blocksizes; |
| |
| /* Fill in the gendisk data */ |
| hba[i]->gendisk.major = MAJOR_NR + i; |
| hba[i]->gendisk.major_name = "cciss"; |
| hba[i]->gendisk.minor_shift = NWD_SHIFT; |
| hba[i]->gendisk.part = hba[i]->hd; |
| hba[i]->gendisk.sizes = hba[i]->sizes; |
| hba[i]->gendisk.nr_real = hba[i]->highest_lun+1; |
| |
| /* Get on the disk list */ |
| add_gendisk(&(hba[i]->gendisk)); |
| |
| cciss_geninit(i); |
| for(j=0; j<NWD; j++) |
| register_disk(&(hba[i]->gendisk), |
| mk_kdev(MAJOR_NR+i, j <<4), |
| MAX_PART, &cciss_fops, |
| hba[i]->drv[j].nr_blocks); |
| |
| cciss_register_scsi(i, 1); /* hook ourself into SCSI subsystem */ |
| |
| return(1); |
| } |
| |
| static void __devexit cciss_remove_one (struct pci_dev *pdev) |
| { |
| ctlr_info_t *tmp_ptr; |
| int i; |
| char flush_buf[4]; |
| int return_code; |
| |
| if (pci_get_drvdata(pdev) == NULL) |
| { |
| printk( KERN_ERR "cciss: Unable to remove device \n"); |
| return; |
| } |
| tmp_ptr = pci_get_drvdata(pdev); |
| i = tmp_ptr->ctlr; |
| if (hba[i] == NULL) |
| { |
| printk(KERN_ERR "cciss: device appears to " |
| "already be removed \n"); |
| return; |
| } |
| /* Turn board interrupts off and send the flush cache command */ |
| /* sendcmd will turn off interrupt, and send the flush... |
| * To write all data in the battery backed cache to disks */ |
| memset(flush_buf, 0, 4); |
| return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL); |
| if(return_code != IO_OK) |
| { |
| printk(KERN_WARNING "Error Flushing cache on controller %d\n", |
| i); |
| } |
| free_irq(hba[i]->intr, hba[i]); |
| pci_set_drvdata(pdev, NULL); |
| iounmap((void*)hba[i]->vaddr); |
| cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ |
| unregister_blkdev(MAJOR_NR+i, hba[i]->devname); |
| remove_proc_entry(hba[i]->devname, proc_cciss); |
| |
| /* remove it from the disk list */ |
| del_gendisk(&(hba[i]->gendisk)); |
| |
| pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct), |
| hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle); |
| pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct), |
| hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); |
| kfree(hba[i]->cmd_pool_bits); |
| release_io_mem(hba[i]); |
| free_hba(i); |
| } |
| |
| static struct pci_driver cciss_pci_driver = { |
| name: "cciss", |
| probe: cciss_init_one, |
| remove: __devexit_p(cciss_remove_one), |
| id_table: cciss_pci_device_id, /* id_table */ |
| }; |
| |
| /* |
| * This is it. Register the PCI driver information for the cards we control |
| * the OS will call our registered routines when it finds one of our cards. |
| */ |
| int __init cciss_init(void) |
| { |
| printk(KERN_INFO DRIVER_NAME "\n"); |
| |
| /* Register for out PCI devices */ |
| if (pci_register_driver(&cciss_pci_driver) > 0 ) |
| return 0; |
| else |
| return -ENODEV; |
| |
| } |
| |
| EXPORT_NO_SYMBOLS; |
| static int __init init_cciss_module(void) |
| { |
| return ( cciss_init()); |
| } |
| |
| static void __exit cleanup_cciss_module(void) |
| { |
| int i; |
| |
| pci_unregister_driver(&cciss_pci_driver); |
| /* double check that all controller entrys have been removed */ |
| for (i=0; i< MAX_CTLR; i++) |
| { |
| if (hba[i] != NULL) |
| { |
| printk(KERN_WARNING "cciss: had to remove" |
| " controller %d\n", i); |
| cciss_remove_one(hba[i]->pdev); |
| } |
| } |
| remove_proc_entry("cciss", proc_root_driver); |
| } |
| |
| module_init(init_cciss_module); |
| module_exit(cleanup_cciss_module); |