| CONFIG_PARPORT |
| If you want to use devices connected to your machine's parallel port |
| (the connector at the computer with 25 holes), e.g. printer, ZIP |
| drive, PLIP link (Parallel Line Internet Protocol is mainly used to |
| create a mini network by connecting the parallel ports of two local |
| machines) etc., then you need to say Y here; please read |
| <file:Documentation/parport.txt> and |
| <file:drivers/parport/BUGS-parport>. |
| |
| For extensive information about drivers for many devices attaching |
| to the parallel port see <http://www.torque.net/linux-pp.html> on |
| the WWW. |
| |
| It is possible to share a single parallel port among several devices |
| and it is safe to compile all the corresponding drivers into the |
| kernel. If you want to compile parallel port support as a module |
| ( = code which can be inserted in and removed from the running |
| kernel whenever you want), say M here and read |
| <file:Documentation/modules.txt>. The module will be called |
| parport.o. If you have more than one parallel port and want to |
| specify which port and IRQ to be used by this driver at module load |
| time, take a look at <file:Documentation/parport.txt>. |
| |
| If unsure, say Y. |
| |
| CONFIG_PARPORT_PC |
| You should say Y here if you have a PC-style parallel port. All IBM |
| PC compatible computers and some Alphas have PC-style parallel |
| ports. |
| |
| This code is also available as a module. If you want to compile it |
| as a module ( = code which can be inserted in and removed from the |
| running kernel whenever you want), say M here and read |
| <file:Documentation/modules.txt>. The module will be called |
| parport_pc.o. |
| |
| If unsure, say Y. |
| |
| CONFIG_PARPORT_SERIAL |
| This adds support for multi-IO PCI cards that have parallel and |
| serial ports. You should say Y or M here. If you say M, the module |
| will be called parport_serial.o. |
| |
| CONFIG_PARPORT_PC_FIFO |
| Many parallel port chipsets provide hardware that can speed up |
| printing. Say Y here if you want to take advantage of that. |
| |
| As well as actually having a FIFO, or DMA capability, the kernel |
| will need to know which IRQ the parallel port has. By default, |
| parallel port interrupts will not be used, and so neither will the |
| FIFO. See <file:Documentation/parport.txt> to find out how to |
| specify which IRQ/DMA to use. |
| |
| CONFIG_PARPORT_PC_SUPERIO |
| Saying Y here enables some probes for Super-IO chipsets in order to |
| find out things like base addresses, IRQ lines and DMA channels. It |
| is safe to say N. |
| |
| CONFIG_PARPORT_PC_PCMCIA |
| Say Y here if you need PCMCIA support for your PC-style parallel |
| ports. If unsure, say N. |
| |
| CONFIG_PARPORT_OTHER |
| Say Y here if you want to be able to load driver modules to support |
| other non-standard types of parallel ports. This causes a |
| performance loss, so most people say N. |
| |
| CONFIG_PARPORT_AMIGA |
| Say Y here if you need support for the parallel port hardware on |
| Amiga machines. This code is also available as a module (say M), |
| called parport_amiga.o. If in doubt, saying N is the safe plan. |
| |
| CONFIG_PARPORT_ATARI |
| Say Y here if you need support for the parallel port hardware on |
| Atari machines. This code is also available as a module (say M), |
| called parport_atari.o. If in doubt, saying N is the safe plan. |
| |
| CONFIG_PARPORT_MFC3 |
| Say Y here if you need parallel port support for the MFC3 card. |
| This code is also available as a module (say M), called |
| parport_mfc3.o. If in doubt, saying N is the safe plan. |
| |
| CONFIG_PARPORT_1284 |
| If you have a printer that supports status readback or device ID, or |
| want to use a device that uses enhanced parallel port transfer modes |
| such as EPP and ECP, say Y here to enable advanced IEEE 1284 |
| transfer modes. Also say Y if you want device ID information to |
| appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N. |
| |
| CONFIG_PARPORT_SUNBPP |
| This driver provides support for the bidirectional parallel port |
| found on many Sun machines. Note that many of the newer Ultras |
| actually have pc style hardware instead. |
| |
| CONFIG_PARPORT_GSC |
| Say Y here to build in low-level parallel-support for PC-style |
| hardware integrated in the LASI-Controller (on the GSC Bus) for |
| HP-PARISC workstations. |
| |