| # |
| # USB Storage driver configuration |
| # |
| comment "SCSI support is needed for USB Storage" |
| depends on USB && SCSI=n |
| |
| config USB_STORAGE |
| tristate "USB Mass Storage support" |
| depends on USB && SCSI |
| ---help--- |
| Say Y here if you want to connect USB mass storage devices to your |
| computer's USB port. This is the driver you need for USB floppy drives, |
| USB hard disks, USB tape drives and USB CD-ROMs, along with |
| similar devices. This driver may also be used for some cameras and |
| card readers. |
| |
| This code is also available as a module ( = code which can be |
| inserted in and removed from the running kernel whenever you want). |
| The module will be called usb-storage. If you want to compile it |
| as a module, say M here and read <file:Documentation/modules.txt>. |
| |
| config USB_STORAGE_DEBUG |
| bool "USB Mass Storage verbose debug" |
| depends on USB_STORAGE |
| help |
| Say Y here in order to have the USB Mass Storage code generate |
| verbose debugging messages. |
| |
| config USB_STORAGE_DATAFAB |
| bool "Datafab Compact Flash Reader support (EXPERIMENTAL)" |
| depends on USB_STORAGE && EXPERIMENTAL |
| help |
| Support for certain Datafab CompactFlash readers. |
| Datafab has a web page at <http://www.datafabusa.com/>. |
| |
| config USB_STORAGE_FREECOM |
| bool "Freecom USB/ATAPI Bridge support" |
| depends on USB_STORAGE |
| help |
| Support for the Freecom USB to IDE/ATAPI adaptor. |
| Freecom has a web page at <http://www.freecom.de/>. |
| |
| config USB_STORAGE_ISD200 |
| bool "ISD-200 USB/ATA Bridge support" |
| depends on USB_STORAGE |
| ---help--- |
| Say Y here if you want to use USB Mass Store devices based |
| on the In-Systems Design ISD-200 USB/ATA bridge. |
| |
| Some of the products that use this chip are: |
| |
| - Archos Jukebox 6000 |
| - ISD SmartCable for Storage |
| - Taiwan Skymaster CD530U/DEL-0241 IDE bridge |
| - Sony CRX10U CD-R/RW drive |
| - CyQ've CQ8060A CDRW drive |
| - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) |
| |
| config USB_STORAGE_DPCM |
| bool "Microtech CompactFlash/SmartMedia support" |
| depends on USB_STORAGE |
| help |
| Say Y here to support the Microtech ZiO! CompactFlash reader. |
| There is a web page at <http://www.microtechint.com/zio/index.html>. |
| |
| config USB_STORAGE_HP8200e |
| bool "HP CD-Writer 82xx support (EXPERIMENTAL)" |
| depends on USB_STORAGE && EXPERIMENTAL |
| help |
| Say Y here to include additional code to support Hewlett-Packard |
| 8200e/8210e/8230e CD-Writer Plus drives. |
| |
| config USB_STORAGE_SDDR09 |
| bool "SanDisk SDDR-09 (and other SmartMedia) support (EXPERIMENTAL)" |
| depends on USB_STORAGE && EXPERIMENTAL |
| help |
| Say Y here to include additional code to support the Sandisk SDDR-09 |
| SmartMedia reader in the USB Mass Storage driver. |
| Also works for the Microtech Zio! SmartMedia reader. |
| |
| config USB_STORAGE_SDDR55 |
| bool "SanDisk SDDR-55 SmartMedia support (EXPERIMENTAL)" |
| depends on USB_STORAGE && EXPERIMENTAL |
| help |
| Say Y here to include additional code to support the Sandisk SDDR-55 |
| SmartMedia reader in the USB Mass Storage driver. |
| |
| config USB_STORAGE_JUMPSHOT |
| bool "Lexar Jumpshot Compact Flash Reader (EXPERIMENTAL)" |
| depends on USB_STORAGE && EXPERIMENTAL |
| help |
| Say Y here to include additional code to support the Lexar Jumpshot |
| USB CompactFlash reader. |
| |
