Google Git
Sign in
kernel / pub / scm / linux / kernel / git / joro / linux / refs/tags/v2.6.30.7 / . / drivers / staging / rt3070 / rt_ate.c
blob: 9238d960121ceea2b3fcf5babc6b178f37c4fb3e [file] [log] [blame]
/*
*************************************************************************
* Ralink Tech Inc.
* 5F., No.36, Taiyuan St., Jhubei City,
* Hsinchu County 302,
* Taiwan, R.O.C.
*
* (c) Copyright 2002-2007, Ralink Technology, Inc.
*
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
* *
*************************************************************************
*/
#include "rt_config.h"
#ifdef UCOS
INT IoctlResponse(PUCHAR payload, PUCHAR msg, INT len);
#endif // UCOS //
#define ATE_BBP_REG_NUM 168
UCHAR restore_BBP[ATE_BBP_REG_NUM]={0};
#ifdef RALINK_ATE
UCHAR TemplateFrame[24] = {0x08/* Data type */,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xAA,0xBB,0x12,0x34,0x56,0x00,0x11,0x22,0xAA,0xBB,0xCC,0x00,0x00}; // 802.11 MAC Header, Type:Data, Length:24bytes
extern RTMP_RF_REGS RF2850RegTable[];
extern UCHAR NUM_OF_2850_CHNL;
#ifdef RT2870
extern UCHAR EpToQueue[];
extern VOID RTUSBRejectPendingPackets( IN PRTMP_ADAPTER pAd);
#endif // RT2870 //
#ifdef RT30xx
//2008/07/10:KH adds to support 3070 ATE<--
extern FREQUENCY_ITEM FreqItems3020[];
extern UCHAR NUM_OF_3020_CHNL;
//2008/07/10:KH adds to support 3070 ATE-->
#endif // RT30xx //
#ifdef UCOS
extern INT ConsoleResponse(IN PUCHAR buff);
extern int (*remote_display)(char *);
#endif // UCOS //
static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
static INT TxDmaBusy(
IN PRTMP_ADAPTER pAd);
static INT RxDmaBusy(
IN PRTMP_ADAPTER pAd);
static VOID RtmpDmaEnable(
IN PRTMP_ADAPTER pAd,
IN INT Enable);
static VOID BbpSoftReset(
IN PRTMP_ADAPTER pAd);
static VOID RtmpRfIoWrite(
IN PRTMP_ADAPTER pAd);
static INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx);
static INT ATETxPwrHandler(
IN PRTMP_ADAPTER pAd,
IN char index);
static INT ATECmdHandler(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg);
static int CheckMCSValid(
IN UCHAR Mode,
IN UCHAR Mcs);
#ifdef RT2870
static VOID ATEWriteTxInfo(
IN PRTMP_ADAPTER pAd,
IN PTXINFO_STRUC pTxInfo,
IN USHORT USBDMApktLen,
IN BOOLEAN bWiv,
IN UCHAR QueueSel,
IN UCHAR NextValid,
IN UCHAR TxBurst);
static VOID ATEWriteTxWI(
IN PRTMP_ADAPTER pAd,
IN PTXWI_STRUC pTxWI,
IN BOOLEAN FRAG,
IN BOOLEAN InsTimestamp,
IN BOOLEAN AMPDU,
IN BOOLEAN Ack,
IN BOOLEAN NSeq, // HW new a sequence.
IN UCHAR BASize,
IN UCHAR WCID,
IN ULONG Length,
IN UCHAR PID,
IN UCHAR MIMOps,
IN UCHAR Txopmode,
IN BOOLEAN CfAck,
IN HTTRANSMIT_SETTING Transmit);
#endif // RT2870 //
static VOID SetJapanFilter(
IN PRTMP_ADAPTER pAd);
/*=========================end of prototype=========================*/
#ifdef RT2870
static INT TxDmaBusy(
IN PRTMP_ADAPTER pAd)
{
INT result;
USB_DMA_CFG_STRUC UsbCfg;
RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
if (UsbCfg.field.TxBusy)
result = 1;
else
result = 0;
return result;
}
static INT RxDmaBusy(
IN PRTMP_ADAPTER pAd)
{
INT result;
USB_DMA_CFG_STRUC UsbCfg;
RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
if (UsbCfg.field.RxBusy)
result = 1;
else
result = 0;
return result;
}
static VOID RtmpDmaEnable(
IN PRTMP_ADAPTER pAd,
IN INT Enable)
{
BOOLEAN value;
ULONG WaitCnt;
USB_DMA_CFG_STRUC UsbCfg;
value = Enable > 0 ? 1 : 0;
// check DMA is in busy mode.
WaitCnt = 0;
while (TxDmaBusy(pAd) || RxDmaBusy(pAd))
{
RTMPusecDelay(10);
if (WaitCnt++ > 100)
break;
}
//Why not to clear USB DMA TX path first ???
RTMP_IO_READ32(pAd, USB_DMA_CFG, &UsbCfg.word); // disable DMA
UsbCfg.field.TxBulkEn = value;
UsbCfg.field.RxBulkEn = value;
RTMP_IO_WRITE32(pAd, USB_DMA_CFG, UsbCfg.word); // abort all TX rings
RTMPusecDelay(5000);
return;
}
#endif // RT2870 //
static VOID BbpSoftReset(
IN PRTMP_ADAPTER pAd)
{
UCHAR BbpData = 0;
// Soft reset, set BBP R21 bit0=1->0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
BbpData |= 0x00000001; //set bit0=1
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R21, &BbpData);
BbpData &= ~(0x00000001); //set bit0=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R21, BbpData);
return;
}
static VOID RtmpRfIoWrite(
IN PRTMP_ADAPTER pAd)
{
// Set RF value 1's set R3[bit2] = [0]
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
RTMPusecDelay(200);
// Set RF value 2's set R3[bit2] = [1]
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 | 0x04));
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
RTMPusecDelay(200);
// Set RF value 3's set R3[bit2] = [0]
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R2);
RTMP_RF_IO_WRITE32(pAd, (pAd->LatchRfRegs.R3 & (~0x04)));
RTMP_RF_IO_WRITE32(pAd, pAd->LatchRfRegs.R4);
return;
}
static int CheckMCSValid(
UCHAR Mode,
UCHAR Mcs)
{
int i;
PCHAR pRateTab;
switch(Mode)
{
case 0:
pRateTab = CCKRateTable;
break;
case 1:
pRateTab = OFDMRateTable;
break;
case 2:
case 3:
pRateTab = HTMIXRateTable;
break;
default:
ATEDBGPRINT(RT_DEBUG_ERROR, ("unrecognizable Tx Mode %d\n", Mode));
return -1;
break;
}
i = 0;
while(pRateTab[i] != -1)
{
if (pRateTab[i] == Mcs)
return 0;
i++;
}
return -1;
}
#if 1
static INT ATETxPwrHandler(
IN PRTMP_ADAPTER pAd,
IN char index)
{
ULONG R;
CHAR TxPower;
UCHAR Bbp94 = 0;
BOOLEAN bPowerReduce = FALSE;
#ifdef RT30xx
UCHAR RFValue;
#endif // RT30xx //
#ifdef RALINK_28xx_QA
if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
{
/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
** are not synchronized.
*/
/*
pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
*/
return 0;
}
else
#endif // RALINK_28xx_QA //
{
TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
if (pAd->ate.Channel <= 14)
{
if (TxPower > 31)
{
//
// R3, R4 can't large than 31 (0x24), 31 ~ 36 used by BBP 94
//
R = 31;
if (TxPower <= 36)
Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
}
else if (TxPower < 0)
{
//
// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
//
R = 0;
if (TxPower >= -6)
Bbp94 = BBPR94_DEFAULT + TxPower;
}
else
{
// 0 ~ 31
R = (ULONG) TxPower;
Bbp94 = BBPR94_DEFAULT;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%ld, BBP_R94=%d)\n", __FUNCTION__, TxPower, R, Bbp94));
}
else// 5.5 GHz
{
if (TxPower > 15)
{
//
// R3, R4 can't large than 15 (0x0F)
//
R = 15;
}
else if (TxPower < 0)
{
//
// R3, R4 can't less than 0
//
// -1 ~ -7
ASSERT((TxPower >= -7));
R = (ULONG)(TxPower + 7);
bPowerReduce = TRUE;
}
else
{
// 0 ~ 15
R = (ULONG) TxPower;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R=%lu)\n", __FUNCTION__, TxPower, R));
}
//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time<--
#ifdef RT30xx
if(IS_RT30xx(pAd))
{
// Set Tx Power
RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
RFValue = (RFValue & 0xE0) | TxPower;
RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
ATEDBGPRINT(RT_DEBUG_TRACE, ("3070 or 2070:%s (TxPower=%d, RFValue=%x)\n", __FUNCTION__, TxPower, RFValue));
}
else
#endif // RT30xx //
{
if (pAd->ate.Channel <= 14)
{
if (index == 0)
{
R = R << 9; // shift TX power control to correct RF(R3) register bit position
R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
pAd->LatchRfRegs.R3 = R;
}
else
{
R = R << 6; // shift TX power control to correct RF(R4) register bit position
R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
pAd->LatchRfRegs.R4 = R;
}
}
else// 5.5GHz
{
if (bPowerReduce == FALSE)
{
if (index == 0)
{
R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position
R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
pAd->LatchRfRegs.R3 = R;
}
else
{
R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position
R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
pAd->LatchRfRegs.R4 = R;
}
}
else
{
if (index == 0)
{
R = (R << 10); // shift TX power control to correct RF(R3) register bit position
R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
/* Clear bit 9 of R3 to reduce 7dB. */
pAd->LatchRfRegs.R3 = (R & (~(1 << 9)));
}
else
{
R = (R << 7); // shift TX power control to correct RF(R4) register bit position
R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
/* Clear bit 6 of R4 to reduce 7dB. */
pAd->LatchRfRegs.R4 = (R & (~(1 << 6)));
}
}
}
RtmpRfIoWrite(pAd);
}
//2008/09/10:KH adds to support 3070 ATE TX Power tunning real time-->
return 0;
}
}
#else// 1 //
static INT ATETxPwrHandler(
IN PRTMP_ADAPTER pAd,
IN char index)
{
ULONG R;
CHAR TxPower;
UCHAR Bbp94 = 0;
#ifdef RALINK_28xx_QA
if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
{
// TODO: how to get current TxPower0/1 from pAd->LatchRfRegs ?
/* When QA is used for Tx, pAd->ate.TxPower0/1 and real tx power
** are not synchronized.
*/
/*
pAd->ate.TxPower0 = pAd->LatchRfRegs.xxx;
pAd->ate.TxPower1 = pAd->LatchRfRegs.xxx;
*/
return 0;
}
else
#endif // RALINK_28xx_QA //
{
TxPower = index == 0 ? pAd->ate.TxPower0 : pAd->ate.TxPower1;
if (TxPower > 31)
{
//
// R3, R4 can't large than 36 (0x24), 31 ~ 36 used by BBP 94
//
R = 31;
if (TxPower <= 36)
Bbp94 = BBPR94_DEFAULT + (UCHAR)(TxPower - 31);
}
else if (TxPower < 0)
{
//
// R3, R4 can't less than 0, -1 ~ -6 used by BBP 94
//
R = 0;
if (TxPower >= -6)
Bbp94 = BBPR94_DEFAULT + TxPower;
}
else
{
// 0 ~ 31
R = (ULONG) TxPower;
Bbp94 = BBPR94_DEFAULT;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("%s (TxPower=%d, R3=%ld, BBP_R94=%d)\n", __FUNCTION__, TxPower, R, Bbp94));
if (pAd->ate.Channel <= 14)
{
if (index == 0)
{
R = R << 9; // shift TX power control to correct RF(R3) register bit position
R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
pAd->LatchRfRegs.R3 = R;
}
else
{
R = R << 6; // shift TX power control to correct RF(R4) register bit position
R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
pAd->LatchRfRegs.R4 = R;
}
}
else
{
if (index == 0)
{
R = (R << 10) | (1 << 9); // shift TX power control to correct RF(R3) register bit position
R |= (pAd->LatchRfRegs.R3 & 0xffffc1ff);
pAd->LatchRfRegs.R3 = R;
}
else
{
R = (R << 7) | (1 << 6); // shift TX power control to correct RF(R4) register bit position
R |= (pAd->LatchRfRegs.R4 & 0xfffff83f);
pAd->LatchRfRegs.R4 = R;
}
}
RtmpRfIoWrite(pAd);
return 0;
}
}
#endif // 1 //
/*
==========================================================================
Description:
Set ATE operation mode to
0. ATESTART = Start ATE Mode
1. ATESTOP = Stop ATE Mode
2. TXCONT = Continuous Transmit
3. TXCARR = Transmit Carrier
4. TXFRAME = Transmit Frames
5. RXFRAME = Receive Frames
#ifdef RALINK_28xx_QA
6. TXSTOP = Stop Any Type of Transmition
7. RXSTOP = Stop Receiving Frames
#endif // RALINK_28xx_QA //
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
/* */
/* */
/*=======================End of RT2860=======================*/
/*======================Start of RT2870======================*/
/* */
/* */
#ifdef RT2870
static INT ATECmdHandler(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
UINT32 Value;
UCHAR BbpData;
UINT32 MacData;
UINT i=0, atemode;
//NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
//PUCHAR pDest;
UINT32 temp;
ULONG IrqFlags;
ATEDBGPRINT(RT_DEBUG_TRACE, ("===> ATECmdHandler()\n"));
ATEAsicSwitchChannel(pAd);
/* AsicLockChannel() is empty function so far in fact */
AsicLockChannel(pAd, pAd->ate.Channel);
RTMPusecDelay(5000);
// Default value in BBP R22 is 0x0.
BbpData = 0;
/* Enter ATE mode and set Tx/Rx Idle */
if (!strcmp(arg, "ATESTART"))
{
#ifdef CONFIG_STA_SUPPORT
BOOLEAN Cancelled;
#endif // CONFIG_STA_SUPPORT //
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
netif_stop_queue(pAd->net_dev);
atemode = pAd->ate.Mode;
pAd->ate.Mode = ATE_START;
// pAd->ate.TxDoneCount = pAd->ate.TxCount;
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Disable auto responder
RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
temp = temp & 0xFFFFFFFE;
RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
// read MAC_SYS_CTRL and backup MAC_SYS_CTRL value.
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
// clean bit4 to stop continuous Tx production test.
MacData &= 0xFFFFFFEF;
// Stop continuous TX production test.
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);//disable or cancel pending irp first ???
if (atemode & ATE_TXCARR
#ifdef RT30xx
|| atemode & ATE_TXCONT
#endif // RT30xx //
)
{
#ifdef RT30xx
//Hardware Reset BBP
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
temp = temp |0x00000002;
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
temp = temp & ~(0x00000002);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
//Restore All BBP Value
for(i=0;i<ATE_BBP_REG_NUM;i++)
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd,i,restore_BBP[i]);
#endif // RT30xx //
// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
}
else if (atemode & ATE_TXCARRSUPP)
{
#ifdef RT30xx
//Hardware Reset BBP
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
temp = temp |0x00000002;
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &temp);
temp = temp & ~(0x00000002);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, temp);
//Restore All BBP Value
for(i=0;i<ATE_BBP_REG_NUM;i++)
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd,i,restore_BBP[i]);
#endif // RT30xx //
// No Cont. TX set BBP R22 bit7=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= ~(1 << 7); //set bit7=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
// No Carrier Suppression set BBP R24 bit0=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
BbpData &= 0xFFFFFFFE; //clear bit0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
}
// We should free some resource which allocate when ATE_TXFRAME , ATE_STOP, and ATE_TXCONT.
// TODO:Should we free some resource which was allocated when LoopBack and ATE_STOP ?
else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
{
if (atemode & ATE_TXCONT)
{
// Not Cont. TX anymore, so set BBP R22 bit7=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= ~(1 << 7); //set bit7=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
}
// Abort Tx, Rx DMA.
RtmpDmaEnable(pAd, 0);
{
// It seems nothing to free,
// because we didn't allocate any resource when we entered ATE_TXFRAME mode latestly.
}
// Start Tx, RX DMA
RtmpDmaEnable(pAd, 1);
}
RTUSBRejectPendingPackets(pAd);
RTUSBCleanUpDataBulkOutQueue(pAd);
#ifdef CONFIG_STA_SUPPORT
//
// It will be called in MlmeSuspend().
//
// Cancel pending timers
RTMPCancelTimer(&pAd->MlmeAux.AssocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ReassocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
#endif // CONFIG_STA_SUPPORT //
//RTUSBCleanUpMLMEWaitQueue(pAd); /* not used in RT28xx */
RTUSBCleanUpMLMEBulkOutQueue(pAd);
// Sometimes kernel will hang on, so we avoid calling MlmeSuspend().
// MlmeSuspend(pAd, TRUE);
//RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
// Disable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Make sure there are no pending bulk in/out IRPs before we go on.
/*=========================================================================*/
/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
while ((pAd->PendingRx > 0)) //pAd->BulkFlags != 0 wait bulk out finish
{
#if 1
ATE_RTUSBCancelPendingBulkInIRP(pAd);
#else
NdisInterlockedDecrement(&pAd->PendingRx);
#endif
/* delay 0.5 seconds */
RTMPusecDelay(500000);
pAd->PendingRx = 0;
}
/* peter : why don't we have to get BulkOutLock first ? */
while (((pAd->BulkOutPending[0] == TRUE) ||
(pAd->BulkOutPending[1] == TRUE) ||
(pAd->BulkOutPending[2] == TRUE) ||
(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
{
do
{
/* pAd->BulkOutPending[y] will be set to FALSE in RTUSBCancelPendingBulkOutIRP(pAd) */
RTUSBCancelPendingBulkOutIRP(pAd);
} while (FALSE);
/* we have enough time delay in RTUSBCancelPendingBulkOutIRP(pAd)
** so this is not necessary
*/
// RTMPusecDelay(500000);
}
/* pAd->PendingRx is not of type atomic_t anymore in 28xx */
// ASSERT(atomic_read(&pAd->PendingRx) == 0);
ASSERT(pAd->PendingRx == 0);
/*=========================================================================*/
// reset Rx statistics.
pAd->ate.LastSNR0 = 0;
pAd->ate.LastSNR1 = 0;
pAd->ate.LastRssi0 = 0;
pAd->ate.LastRssi1 = 0;
pAd->ate.LastRssi2 = 0;
pAd->ate.AvgRssi0 = 0;
pAd->ate.AvgRssi1 = 0;
pAd->ate.AvgRssi2 = 0;
pAd->ate.AvgRssi0X8 = 0;
pAd->ate.AvgRssi1X8 = 0;
pAd->ate.AvgRssi2X8 = 0;
pAd->ate.NumOfAvgRssiSample = 0;
#ifdef RALINK_28xx_QA
// Tx frame
pAd->ate.bQATxStart = FALSE;
pAd->ate.bQARxStart = FALSE;
pAd->ate.seq = 0;
// counters
pAd->ate.U2M = 0;
pAd->ate.OtherData = 0;
pAd->ate.Beacon = 0;
pAd->ate.OtherCount = 0;
pAd->ate.TxAc0 = 0;
pAd->ate.TxAc1 = 0;
pAd->ate.TxAc2 = 0;
pAd->ate.TxAc3 = 0;
pAd->ate.TxHCCA = 0;
pAd->ate.TxMgmt = 0;
pAd->ate.RSSI0 = 0;
pAd->ate.RSSI1 = 0;
pAd->ate.RSSI2 = 0;
pAd->ate.SNR0 = 0;
pAd->ate.SNR1 = 0;
// control
pAd->ate.TxDoneCount = 0;
pAd->ate.TxStatus = 0; // task Tx status // 0 --> task is idle, 1 --> task is running
#endif // RALINK_28xx_QA //
// Soft reset BBP.
BbpSoftReset(pAd);
#ifdef CONFIG_STA_SUPPORT
AsicDisableSync(pAd);
/*
** If we skip "LinkDown()", we should disable protection
** to prevent from sending out RTS or CTS-to-self.
*/
ATEDisableAsicProtect(pAd);
RTMPStationStop(pAd);
#endif // CONFIG_STA_SUPPORT //
// Default value in BBP R22 is 0x0.
BbpData = 0;
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
// Clean bit4 to stop continuous Tx production test.
MacData &= 0xFFFFFFEF;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
//Clean ATE Bulk in/out counter and continue setup
InterlockedExchange(&pAd->BulkOutRemained, 0);
/* NdisAcquireSpinLock()/NdisReleaseSpinLock() need only one argument in RT28xx */
NdisAcquireSpinLock(&pAd->GenericLock);
pAd->ContinBulkOut = FALSE;
pAd->ContinBulkIn = FALSE;
NdisReleaseSpinLock(&pAd->GenericLock);
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
}
else if (!strcmp(arg, "ATESTOP"))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE : ATESTOP ===>\n"));
// Default value in BBP R22 is 0x0.
BbpData = 0;
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);//0820
// Clean bit4 to stop continuous Tx production test.
MacData &= 0xFFFFFFEF;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData); // recover the MAC_SYS_CTRL register back.
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
/*
** Abort Tx, RX DMA.
** Q : How to do the following I/O if Tx, Rx DMA is aborted ?
** Ans : Bulk endpoints are aborted, while the control endpoint is not.
*/
RtmpDmaEnable(pAd, 0);
// Disable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
/* Make sure there are no pending bulk in/out IRPs before we go on. */
/*=========================================================================*/
// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
while (pAd->PendingRx > 0)
{
#if 1
ATE_RTUSBCancelPendingBulkInIRP(pAd);
#else
// NdisInterlockedDecrement(&pAd->PendingRx);
pAd->PendingRx--;
#endif
RTMPusecDelay(500000);
}
while (((pAd->BulkOutPending[0] == TRUE) ||
(pAd->BulkOutPending[1] == TRUE) ||
(pAd->BulkOutPending[2] == TRUE) ||
(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
{
do
{
RTUSBCancelPendingBulkOutIRP(pAd);
} while (FALSE);
RTMPusecDelay(500000);
}
// ASSERT(atomic_read(&pAd->PendingRx) == 0);
ASSERT(pAd->PendingRx == 0);
/*=========================================================================*/
/* Reset Rx RING */
/*=========================================================================*/
// InterlockedExchange(&pAd->PendingRx, 0);
pAd->PendingRx = 0;
pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer
pAd->NextRxBulkInPosition = 0;
for (i = 0; i < (RX_RING_SIZE); i++)
{
PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
NdisZeroMemory(pRxContext->TransferBuffer, MAX_RXBULK_SIZE);
/* peter : why don't we have to get BulkInLock first ? */
pRxContext->pAd = pAd;
pRxContext->pIrp = NULL;
/* peter debug ++ */
pRxContext->BulkInOffset = 0;
pRxContext->bRxHandling = FALSE;
/* peter debug -- */
pRxContext->InUse = FALSE;
pRxContext->IRPPending = FALSE;
pRxContext->Readable = FALSE;
// pRxContext->ReorderInUse = FALSE;
// pRxContext->ReadPosOffset = 0;
}
/*=========================================================================*/
/* Reset Tx RING */
/*=========================================================================*/
do
{
RTUSBCancelPendingBulkOutIRP(pAd);
} while (FALSE);
/*=========================================================================*/
// Enable auto responder.
RTMP_IO_READ32(pAd, AUTO_RSP_CFG, &temp);
temp = temp | (0x01);
RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, temp);
/*================================================*/
AsicEnableBssSync(pAd);
/* Soft reset BBP.*/
/* In 2870 chipset, ATE_BBP_IO_READ8_BY_REG_ID() == RTMP_BBP_IO_READ8_BY_REG_ID() */
/* Both rt2870ap and rt2870sta use BbpSoftReset(pAd) to do BBP soft reset */
BbpSoftReset(pAd);
/*================================================*/
{
#ifdef CONFIG_STA_SUPPORT
// Set all state machines back IDLE
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE;
pAd->Mlme.AuthRspMachine.CurrState = AUTH_RSP_IDLE;
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
pAd->Mlme.ActMachine.CurrState = ACT_IDLE;
#endif // CONFIG_STA_SUPPORT //
//
// ===> refer to MlmeRestartStateMachine().
// When we entered ATE_START mode, PeriodicTimer was not cancelled.
// So we don't have to set it here.
//
//RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
ASSERT(pAd->CommonCfg.Channel != 0);
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
#ifdef CONFIG_STA_SUPPORT
RTMPStationStart(pAd);
#endif // CONFIG_STA_SUPPORT //
}
//
// These two steps have been done when entering ATE_STOP mode.
//
// Clean ATE Bulk in/out counter and continue setup.
InterlockedExchange(&pAd->BulkOutRemained, 0);
NdisAcquireSpinLock(&pAd->GenericLock);
pAd->ContinBulkOut = FALSE;
pAd->ContinBulkIn = FALSE;
NdisReleaseSpinLock(&pAd->GenericLock);
/* Wait 50ms to prevent next URB to bulkout during HW reset. */
/* todo : remove this if not necessary */
NdisMSleep(50000);
pAd->ate.Mode = ATE_STOP;
// Enable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
/*=========================================================================*/
/* restore RX_FILTR_CFG */
#ifdef CONFIG_STA_SUPPORT
/* restore RX_FILTR_CFG in order that QA maybe set it to 0x3 */
RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL);
#endif // CONFIG_STA_SUPPORT //
/*=========================================================================*/
// Enable Tx, RX DMA.
RtmpDmaEnable(pAd, 1);
// Enable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Wait 10ms to wait all of the bulk-in URBs to complete.
/* todo : remove this if not necessary */
NdisMSleep(10000);
// Everything is ready to start normal Tx/Rx.
RTUSBBulkReceive(pAd);
netif_start_queue(pAd->net_dev);
ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATE : ATESTOP \n"));
}
else if (!strcmp(arg, "TXCARR")) // Tx Carrier
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCARR\n"));
pAd->ate.Mode |= ATE_TXCARR;
#ifdef RT30xx
for(i=0;i<ATE_BBP_REG_NUM;i++)
restore_BBP[i]=0;
//Record All BBP Value
for(i=0;i<ATE_BBP_REG_NUM;i++)
ATE_BBP_IO_READ8_BY_REG_ID(pAd,i,&restore_BBP[i]);
#endif // RT30xx //
// Disable Rx
// May be we need not to do this, because these have been done in ATE_START mode ???
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// QA has done the following steps if it is used.
if (pAd->ate.bQATxStart == FALSE)
{
// Soft reset BBP.
BbpSoftReset(pAd);
// Carrier Test set BBP R22 bit7=1, bit6=1, bit[5~0]=0x01
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
BbpData |= 0x000000C1; //set bit7=1, bit6=1, bit[5~0]=0x01
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
// set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value = Value | 0x00000010;
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
}
}
else if (!strcmp(arg, "TXCONT")) // Tx Continue
{
if (pAd->ate.bQATxStart == TRUE)
{
/* set MAC_SYS_CTRL(0x1004) bit4(Continuous Tx Production Test)
and bit2(MAC TX enable) back to zero. */
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
MacData &= 0xFFFFFFEB;
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
// set BBP R22 bit7=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= 0xFFFFFF7F; //set bit7=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
}
/* for TxCont mode.
** Step 1: Send 50 packets first then wait for a moment.
** Step 2: Send more 50 packet then start continue mode.
*/
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXCONT\n"));
#ifdef RT30xx
for(i=0;i<ATE_BBP_REG_NUM;i++)
restore_BBP[i]=0;
//Record All BBP Value
for(i=0;i<ATE_BBP_REG_NUM;i++)
ATE_BBP_IO_READ8_BY_REG_ID(pAd,i,&restore_BBP[i]);
#endif // RT30xx //
// Step 1: send 50 packets first.
pAd->ate.Mode |= ATE_TXCONT;
pAd->ate.TxCount = 50;
pAd->ate.TxDoneCount = 0;
// Soft reset BBP.
BbpSoftReset(pAd);
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
/* Only needed if we have to send some normal frames. */
SetJapanFilter(pAd);
// Setup frame format.
ATESetUpFrame(pAd, 0);
// Enable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Start Tx, RX DMA.
RtmpDmaEnable(pAd, 1);
InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
pAd->ate.TxStatus = 1;
//pAd->ate.Repeat = 0;
}
#endif // RALINK_28xx_QA //
NdisAcquireSpinLock(&pAd->GenericLock);//0820
pAd->ContinBulkOut = FALSE;
NdisReleaseSpinLock(&pAd->GenericLock);
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
// Kick bulk out
RTUSBKickBulkOut(pAd);
/* To make sure all the 50 frames have been bulk out before executing step 2 */
while (atomic_read(&pAd->BulkOutRemained) > 0)
{
RTMPusecDelay(5000);
}
// Step 2: send more 50 packets then start continue mode.
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
// Cont. TX set BBP R22 bit7=1
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData |= 0x00000080; //set bit7=1
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
pAd->ate.TxCount = 50;
pAd->ate.TxDoneCount = 0;
SetJapanFilter(pAd);
// Setup frame format.
ATESetUpFrame(pAd, 0);
// Enable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
// Start Tx, RX DMA.
RtmpDmaEnable(pAd, 1);
InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
pAd->ate.TxStatus = 1;
//pAd->ate.Repeat = 0;
}
#endif // RALINK_28xx_QA //
NdisAcquireSpinLock(&pAd->GenericLock);//0820
pAd->ContinBulkOut = FALSE;
NdisReleaseSpinLock(&pAd->GenericLock);
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
// Kick bulk out
RTUSBKickBulkOut(pAd);
#if 1
RTMPusecDelay(500);
#else
while (atomic_read(&pAd->BulkOutRemained) > 0)
{
RTMPusecDelay(5000);
}
#endif // 1 //
// Set MAC_SYS_CTRL(0x1004) Continuous Tx Production Test (bit4) = 1.
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
MacData |= 0x00000010;
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
}
else if (!strcmp(arg, "TXFRAME")) // Tx Frames
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXFRAME(Count=0x%08x)\n", pAd->ate.TxCount));
pAd->ate.Mode |= ATE_TXFRAME;
// Soft reset BBP.
BbpSoftReset(pAd);
// Default value in BBP R22 is 0x0.
BbpData = 0;
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
// Clean bit4 to stop continuous Tx production test.
MacData &= 0xFFFFFFEF;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
#ifdef RALINK_28xx_QA
// add this for LoopBack mode
if (pAd->ate.bQARxStart == FALSE)
{
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
}
if (pAd->ate.bQATxStart == TRUE)
{
pAd->ate.TxStatus = 1;
//pAd->ate.Repeat = 0;
}
#else
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
#endif // RALINK_28xx_QA //
// Enable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
SetJapanFilter(pAd);
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
pAd->ate.TxDoneCount = 0;
// Setup frame format
ATESetUpFrame(pAd, 0);
// Start Tx, RX DMA.
RtmpDmaEnable(pAd, 1);
// Check count is continuous or not yet.
//
// Due to the type mismatch between "pAd->BulkOutRemained"(atomic_t) and "pAd->ate.TxCount"(UINT32)
//
if (pAd->ate.TxCount == 0)
{
InterlockedExchange(&pAd->BulkOutRemained, 0);
}
else
{
InterlockedExchange(&pAd->BulkOutRemained, pAd->ate.TxCount);
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("bulk out count = %d\n", atomic_read(&pAd->BulkOutRemained)));
ASSERT((atomic_read(&pAd->BulkOutRemained) >= 0));
if (atomic_read(&pAd->BulkOutRemained) == 0)
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packet countinuously\n"));
/* In 28xx, NdisAcquireSpinLock() == spin_lock_bh() */
/* NdisAcquireSpinLock only need one argument in 28xx. */
NdisAcquireSpinLock(&pAd->GenericLock);
pAd->ContinBulkOut = TRUE;
NdisReleaseSpinLock(&pAd->GenericLock);
/* In 28xx, BULK_OUT_LOCK() == spin_lock_irqsave() */
BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
pAd->BulkOutPending[0] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);// peter : NdisAcquireSpinLock ==> BULK_OUT_LOCK
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("Send packets depend on counter\n"));
NdisAcquireSpinLock(&pAd->GenericLock);
pAd->ContinBulkOut = FALSE;
NdisReleaseSpinLock(&pAd->GenericLock);
BULK_OUT_LOCK(&pAd->BulkOutLock[0], IrqFlags);
pAd->BulkOutPending[0] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[0], IrqFlags);
}
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
// Kick bulk out
RTUSBKickBulkOut(pAd);
}
#ifdef RALINK_28xx_QA
else if (!strcmp(arg, "TXSTOP")) //Enter ATE mode and set Tx/Rx Idle
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: TXSTOP\n"));
atemode = pAd->ate.Mode;
pAd->ate.Mode &= ATE_TXSTOP;
pAd->ate.bQATxStart = FALSE;
// pAd->ate.TxDoneCount = pAd->ate.TxCount;
/*=========================================================================*/
if (atemode & ATE_TXCARR)
{
// No Carrier Test set BBP R22 bit7=0, bit6=0, bit[5~0]=0x0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= 0xFFFFFF00; //clear bit7, bit6, bit[5~0]
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
}
else if (atemode & ATE_TXCARRSUPP)
{
// No Cont. TX set BBP R22 bit7=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= ~(1 << 7); //set bit7=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
// No Carrier Suppression set BBP R24 bit0=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R24, &BbpData);
BbpData &= 0xFFFFFFFE; //clear bit0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, BbpData);
}
else if ((atemode & ATE_TXFRAME) || (atemode == ATE_STOP))
{
if (atemode & ATE_TXCONT)
{
// No Cont. TX set BBP R22 bit7=0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R22, &BbpData);
BbpData &= ~(1 << 7); //set bit7=0
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
}
}
/*=========================================================================*/
RTUSBRejectPendingPackets(pAd);
RTUSBCleanUpDataBulkOutQueue(pAd);
/* not used in RT28xx */
//RTUSBCleanUpMLMEWaitQueue(pAd);
/* empty function so far */
RTUSBCleanUpMLMEBulkOutQueue(pAd);
/*=========================================================================*/
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
/*=========================================================================*/
/* In 28xx, pAd->PendingRx is not of type atomic_t anymore */
// while ((atomic_read(&pAd->PendingRx) > 0)) //pAd->BulkFlags != 0 wait bulk out finish
/* peter todo : BulkInLock */
while (pAd->PendingRx > 0)
{
#if 1
ATE_RTUSBCancelPendingBulkInIRP(pAd);
#else
// NdisInterlockedDecrement(&pAd->PendingRx);
pAd->PendingRx--;
#endif
RTMPusecDelay(500000);
}
while (((pAd->BulkOutPending[0] == TRUE) ||
(pAd->BulkOutPending[1] == TRUE) ||
(pAd->BulkOutPending[2] == TRUE) ||
(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
{
do
{
RTUSBCancelPendingBulkOutIRP(pAd);
} while (FALSE);
RTMPusecDelay(500000);
}
ASSERT(pAd->PendingRx == 0);
/*=========================================================================*/
// Enable Tx, Rx DMA.
RtmpDmaEnable(pAd, 1);
/* task Tx status : 0 --> task is idle, 1 --> task is running */
pAd->ate.TxStatus = 0;
// Soft reset BBP.
BbpSoftReset(pAd);
// Disable Tx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
MacData &= (0xfffffffb);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
//Clean ATE Bulk in/out counter and continue setup
InterlockedExchange(&pAd->BulkOutRemained, 0);
pAd->ContinBulkOut = FALSE;
}
else if (!strcmp(arg, "RXSTOP"))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXSTOP\n"));
atemode = pAd->ate.Mode;
// Disable Rx
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
pAd->ate.Mode &= ATE_RXSTOP;
pAd->ate.bQARxStart = FALSE;
// pAd->ate.TxDoneCount = pAd->ate.TxCount;
/*=========================================================================*/
RTUSBRejectPendingPackets(pAd);
RTUSBCleanUpDataBulkOutQueue(pAd);
/* not used in RT28xx */
//RTUSBCleanUpMLMEWaitQueue(pAd);
RTUSBCleanUpMLMEBulkOutQueue(pAd);
/*=========================================================================*/
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
/*=========================================================================*/
// while ((atomic_read(&pAd->PendingRx) > 0))
while (pAd->PendingRx > 0)
{
#if 1
ATE_RTUSBCancelPendingBulkInIRP(pAd);
#else
// NdisInterlockedDecrement(&pAd->PendingRx);
pAd->PendingRx--;
#endif
RTMPusecDelay(500000);
}
while (((pAd->BulkOutPending[0] == TRUE) ||
(pAd->BulkOutPending[1] == TRUE) ||
(pAd->BulkOutPending[2] == TRUE) ||
(pAd->BulkOutPending[3] == TRUE)) && (pAd->BulkFlags != 0)) //pAd->BulkFlags != 0 wait bulk out finish
{
do
{
RTUSBCancelPendingBulkOutIRP(pAd);
} while (FALSE);
RTMPusecDelay(500000);
}
ASSERT(pAd->PendingRx == 0);
/*=========================================================================*/
// Soft reset BBP.
BbpSoftReset(pAd);
pAd->ContinBulkIn = FALSE;
}
#endif // RALINK_28xx_QA //
else if (!strcmp(arg, "RXFRAME")) // Rx Frames
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: RXFRAME\n"));
// Disable Rx of MAC block
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Default value in BBP R22 is 0x0.
BbpData = 0;
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &MacData);
// Clean bit4 to stop continuous Tx production test.
MacData &= 0xFFFFFFEF;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R22, BbpData);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, MacData);
pAd->ate.Mode |= ATE_RXFRAME;
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
// Disable TX of MAC block
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value &= ~(1 << 2);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Reset Rx RING.
for ( i = 0; i < (RX_RING_SIZE); i++)
{
PRX_CONTEXT pRxContext = &(pAd->RxContext[i]);
pRxContext->InUse = FALSE;
pRxContext->IRPPending = FALSE;
pRxContext->Readable = FALSE;
//
// Get the urb from kernel back to driver.
//
RTUSB_UNLINK_URB(pRxContext->pUrb);
/* Sleep 200 microsecs to give cancellation time to work. */
NdisMSleep(200);
pAd->BulkInReq = 0;
// InterlockedExchange(&pAd->PendingRx, 0);
pAd->PendingRx = 0;
pAd->NextRxBulkInReadIndex = 0; // Next Rx Read index
pAd->NextRxBulkInIndex = RX_RING_SIZE - 1; // Rx Bulk pointer
pAd->NextRxBulkInPosition = 0;
}
// read to clear counters
RTUSBReadMACRegister(pAd, RX_STA_CNT0, &temp); //RX PHY & RX CRC count
RTUSBReadMACRegister(pAd, RX_STA_CNT1, &temp); //RX PLCP error count & CCA false alarm count
RTUSBReadMACRegister(pAd, RX_STA_CNT2, &temp); //RX FIFO overflow frame count & RX duplicated filtered frame count
pAd->ContinBulkIn = TRUE;
// Enable Tx, RX DMA.
RtmpDmaEnable(pAd, 1);
// Enable RX of MAC block
RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
Value |= (1 << 3);
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
// Kick bulk in
RTUSBBulkReceive(pAd);
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: Invalid arg!\n"));
return FALSE;
}
RTMPusecDelay(5000);
ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== ATECmdHandler()\n"));
return TRUE;
}
#endif // RT2870 //
INT Set_ATE_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
if (ATECmdHandler(pAd, arg))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Success\n"));
return TRUE;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_Proc Failed\n"));
return FALSE;
}
}
/*
==========================================================================
Description:
Set ATE ADDR1=DA for TxFrame(AP : To DS = 0 ; From DS = 1)
or
Set ATE ADDR3=DA for TxFrame(STA : To DS = 1 ; From DS = 0)
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_DA_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR *value;
INT i;
if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
return FALSE;
for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
{
if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
AtoH(value, &pAd->ate.Addr3[i++], 1);
#endif // CONFIG_STA_SUPPORT //
}
if(i != 6)
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_DA_Proc (DA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr3[0],
pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]));
#endif // CONFIG_STA_SUPPORT //
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_DA_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE ADDR3=SA for TxFrame(AP : To DS = 0 ; From DS = 1)
or
Set ATE ADDR2=SA for TxFrame(STA : To DS = 1 ; From DS = 0)
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_SA_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR *value;
INT i;
if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
return FALSE;
for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
{
if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
AtoH(value, &pAd->ate.Addr2[i++], 1);
#endif // CONFIG_STA_SUPPORT //
}
if(i != 6)
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_SA_Proc (SA = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr2[0],
pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]));
#endif // CONFIG_STA_SUPPORT //
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_SA_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE ADDR2=BSSID for TxFrame(AP : To DS = 0 ; From DS = 1)
or
Set ATE ADDR1=BSSID for TxFrame(STA : To DS = 1 ; From DS = 0)
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_BSSID_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR *value;
INT i;
if(strlen(arg) != 17) //Mac address acceptable format 01:02:03:04:05:06 length 17
return FALSE;
for (i=0, value = rstrtok(arg, ":"); value; value = rstrtok(NULL, ":"))
{
if((strlen(value) != 2) || (!isxdigit(*value)) || (!isxdigit(*(value+1))) )
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
AtoH(value, &pAd->ate.Addr1[i++], 1);
#endif // CONFIG_STA_SUPPORT //
}
if(i != 6)
return FALSE; //Invalid
#ifdef CONFIG_STA_SUPPORT
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_BSSID_Proc (BSSID = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAd->ate.Addr1[0],
pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]));
#endif // CONFIG_STA_SUPPORT //
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_BSSID_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx Channel
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_CHANNEL_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
UCHAR channel;
channel = simple_strtol(arg, 0, 10);
if ((channel < 1) || (channel > 216))// to allow A band channel : ((channel < 1) || (channel > 14))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_CHANNEL_Proc::Out of range, it should be in range of 1~14.\n"));
return FALSE;
}
pAd->ate.Channel = channel;
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_CHANNEL_Proc (ATE Channel = %d)\n", pAd->ate.Channel));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_CHANNEL_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx Power0
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_POWER0_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR TxPower;
TxPower = simple_strtol(arg, 0, 10);
if (pAd->ate.Channel <= 14)
{
if ((TxPower > 31) || (TxPower < 0))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
return FALSE;
}
}
else// 5.5GHz
{
if ((TxPower > 15) || (TxPower < -7))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER0_Proc::Out of range (Value=%d)\n", TxPower));
return FALSE;
}
}
pAd->ate.TxPower0 = TxPower;
ATETxPwrHandler(pAd, 0);
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER0_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx Power1
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_POWER1_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR TxPower;
TxPower = simple_strtol(arg, 0, 10);
if (pAd->ate.Channel <= 14)
{
if ((TxPower > 31) || (TxPower < 0))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
return FALSE;
}
}
else
{
if ((TxPower > 15) || (TxPower < -7))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_POWER1_Proc::Out of range (Value=%d)\n", TxPower));
return FALSE;
}
}
pAd->ate.TxPower1 = TxPower;
ATETxPwrHandler(pAd, 1);
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_POWER1_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx Antenna
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_Antenna_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR value;
value = simple_strtol(arg, 0, 10);
if ((value > 2) || (value < 0))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_Antenna_Proc::Out of range (Value=%d)\n", value));
return FALSE;
}
pAd->ate.TxAntennaSel = value;
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_Antenna_Proc (Antenna = %d)\n", pAd->ate.TxAntennaSel));
ATEDBGPRINT(RT_DEBUG_TRACE,("Ralink: Set_ATE_TX_Antenna_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Rx Antenna
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_RX_Antenna_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR value;
value = simple_strtol(arg, 0, 10);
if ((value > 3) || (value < 0))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_RX_Antenna_Proc::Out of range (Value=%d)\n", value));
return FALSE;
}
pAd->ate.RxAntennaSel = value;
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_Antenna_Proc (Antenna = %d)\n", pAd->ate.RxAntennaSel));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_Antenna_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE RF frequence offset
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_FREQOFFSET_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
UCHAR RFFreqOffset;
ULONG R4;
RFFreqOffset = simple_strtol(arg, 0, 10);
#ifndef RT30xx
if(RFFreqOffset >= 64)
#endif // RT30xx //
#ifdef RT30xx
//2008/08/06: KH modified the limit of offset value from 65 to 95(0x5F)
if(RFFreqOffset >= 95)
#endif // RT30xx //
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_FREQOFFSET_Proc::Out of range, it should be in range of 0~63.\n"));
return FALSE;
}
pAd->ate.RFFreqOffset = RFFreqOffset;
#ifdef RT30xx
if(IS_RT30xx(pAd))
{
// Set RF offset
UCHAR RFValue;
RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
//2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset"
RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset;
RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
}
else
#endif // RT30xx //
{
R4 = pAd->ate.RFFreqOffset << 15; // shift TX power control to correct RF register bit position
R4 |= (pAd->LatchRfRegs.R4 & ((~0x001f8000)));
pAd->LatchRfRegs.R4 = R4;
RtmpRfIoWrite(pAd);
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_FREQOFFSET_Proc (RFFreqOffset = %d)\n", pAd->ate.RFFreqOffset));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_FREQOFFSET_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE RF BW
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_BW_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
int i;
UCHAR value = 0;
UCHAR BBPCurrentBW;
BBPCurrentBW = simple_strtol(arg, 0, 10);
if(BBPCurrentBW == 0)
pAd->ate.TxWI.BW = BW_20;
else
pAd->ate.TxWI.BW = BW_40;
if(pAd->ate.TxWI.BW == BW_20)
{
if(pAd->ate.Channel <= 14)
{
for (i=0; i<5; i++)
{
if (pAd->Tx20MPwrCfgGBand[i] != 0xffffffff)
{
RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgGBand[i]);
RTMPusecDelay(5000);
}
}
}
else
{
for (i=0; i<5; i++)
{
if (pAd->Tx20MPwrCfgABand[i] != 0xffffffff)
{
RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx20MPwrCfgABand[i]);
RTMPusecDelay(5000);
}
}
}
//Set BBP R4 bit[4:3]=0:0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
value &= (~0x18);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
//Set BBP R66=0x3C
value = 0x3C;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
//Set BBP R68=0x0B
//to improve Rx sensitivity.
value = 0x0B;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
//Set BBP R69=0x16
value = 0x16;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
//Set BBP R70=0x08
value = 0x08;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
//Set BBP R73=0x11
value = 0x11;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
// If Channel=14, Bandwidth=20M and Mode=CCK, Set BBP R4 bit5=1
// (Japan filter coefficients)
// This segment of code will only works when ATETXMODE and ATECHANNEL
// were set to MODE_CCK and 14 respectively before ATETXBW is set to 0.
//=====================================================================
if (pAd->ate.Channel == 14)
{
int TxMode = pAd->ate.TxWI.PHYMODE;
if (TxMode == MODE_CCK)
{
// when Channel==14 && Mode==CCK && BandWidth==20M, BBP R4 bit5=1
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
value |= 0x20; //set bit5=1
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
}
}
//=====================================================================
// If bandwidth != 40M, RF Reg4 bit 21 = 0.
#ifdef RT30xx
// Set BW
if(IS_RT30xx(pAd))
RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW20RfR24);
else
#endif // RT30xx //
{
pAd->LatchRfRegs.R4 &= ~0x00200000;
RtmpRfIoWrite(pAd);
}
}
else if(pAd->ate.TxWI.BW == BW_40)
{
if(pAd->ate.Channel <= 14)
{
for (i=0; i<5; i++)
{
if (pAd->Tx40MPwrCfgGBand[i] != 0xffffffff)
{
RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgGBand[i]);
RTMPusecDelay(5000);
}
}
}
else
{
for (i=0; i<5; i++)
{
if (pAd->Tx40MPwrCfgABand[i] != 0xffffffff)
{
RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, pAd->Tx40MPwrCfgABand[i]);
RTMPusecDelay(5000);
}
}
#ifdef DOT11_N_SUPPORT
if ((pAd->ate.TxWI.PHYMODE >= MODE_HTMIX) && (pAd->ate.TxWI.MCS == 7))
{
value = 0x28;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R67, value);
}
#endif // DOT11_N_SUPPORT //
}
//Set BBP R4 bit[4:3]=1:0
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &value);
value &= (~0x18);
value |= 0x10;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, value);
//Set BBP R66=0x3C
value = 0x3C;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, value);
//Set BBP R68=0x0C
//to improve Rx sensitivity.
value = 0x0C;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R68, value);
//Set BBP R69=0x1A
value = 0x1A;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, value);
//Set BBP R70=0x0A
value = 0x0A;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, value);
//Set BBP R73=0x16
value = 0x16;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, value);
// If bandwidth = 40M, set RF Reg4 bit 21 = 1.
#ifdef RT30xx
// Set BW
if(IS_RT30xx(pAd))
RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR) pAd->Mlme.CaliBW40RfR24);
else
#endif // RT30xx //
{
pAd->LatchRfRegs.R4 |= 0x00200000;
RtmpRfIoWrite(pAd);
}
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_BW_Proc (BBPCurrentBW = %d)\n", pAd->ate.TxWI.BW));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_BW_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx frame length
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_LENGTH_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
pAd->ate.TxLength = simple_strtol(arg, 0, 10);
if((pAd->ate.TxLength < 24) || (pAd->ate.TxLength > (MAX_FRAME_SIZE - 34/* == 2312 */)))
{
pAd->ate.TxLength = (MAX_FRAME_SIZE - 34/* == 2312 */);
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_LENGTH_Proc::Out of range, it should be in range of 24~%d.\n", (MAX_FRAME_SIZE - 34/* == 2312 */)));
return FALSE;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_LENGTH_Proc (TxLength = %d)\n", pAd->ate.TxLength));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_LENGTH_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx frame count
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_COUNT_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
pAd->ate.TxCount = simple_strtol(arg, 0, 10);
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_COUNT_Proc (TxCount = %d)\n", pAd->ate.TxCount));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_COUNT_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx frame MCS
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_MCS_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
UCHAR MCS;
int result;
MCS = simple_strtol(arg, 0, 10);
result = CheckMCSValid(pAd->ate.TxWI.PHYMODE, MCS);
if (result != -1)
{
pAd->ate.TxWI.MCS = (UCHAR)MCS;
}
else
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MCS_Proc::Out of range, refer to rate table.\n"));
return FALSE;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MCS_Proc (MCS = %d)\n", pAd->ate.TxWI.MCS));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MCS_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx frame Mode
0: MODE_CCK
1: MODE_OFDM
2: MODE_HTMIX
3: MODE_HTGREENFIELD
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_MODE_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
pAd->ate.TxWI.PHYMODE = simple_strtol(arg, 0, 10);
if(pAd->ate.TxWI.PHYMODE > 3)
{
pAd->ate.TxWI.PHYMODE = 0;
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_MODE_Proc::Out of range. it should be in range of 0~3\n"));
ATEDBGPRINT(RT_DEBUG_ERROR, ("0: CCK, 1: OFDM, 2: HT_MIX, 3: HT_GREEN_FIELD.\n"));
return FALSE;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_MODE_Proc (TxMode = %d)\n", pAd->ate.TxWI.PHYMODE));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_MODE_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
Set ATE Tx frame GI
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
INT Set_ATE_TX_GI_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
pAd->ate.TxWI.ShortGI = simple_strtol(arg, 0, 10);
if(pAd->ate.TxWI.ShortGI > 1)
{
pAd->ate.TxWI.ShortGI = 0;
ATEDBGPRINT(RT_DEBUG_ERROR, ("Set_ATE_TX_GI_Proc::Out of range\n"));
return FALSE;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_TX_GI_Proc (GI = %d)\n", pAd->ate.TxWI.ShortGI));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_TX_GI_Proc Success\n"));
return TRUE;
}
/*
==========================================================================
Description:
==========================================================================
*/
INT Set_ATE_RX_FER_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
pAd->ate.bRxFer = simple_strtol(arg, 0, 10);
if (pAd->ate.bRxFer == 1)
{
pAd->ate.RxCntPerSec = 0;
pAd->ate.RxTotalCnt = 0;
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("Set_ATE_RX_FER_Proc (bRxFer = %d)\n", pAd->ate.bRxFer));
ATEDBGPRINT(RT_DEBUG_TRACE, ("Ralink: Set_ATE_RX_FER_Proc Success\n"));
return TRUE;
}
INT Set_ATE_Read_RF_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef RT30xx
//2008/07/10:KH add to support RT30xx ATE<--
if(IS_RT30xx(pAd))
{
/* modify by WY for Read RF Reg. error */
UCHAR RFValue;
INT index=0;
for (index = 0; index < 32; index++)
{
RT30xxReadRFRegister(pAd, index, (PUCHAR)&RFValue);
printk("R%d=%d\n",index,RFValue);
}
}
else
//2008/07/10:KH add to support RT30xx ATE-->
#endif // RT30xx //
{
ate_print(KERN_EMERG "R1 = %lx\n", pAd->LatchRfRegs.R1);
ate_print(KERN_EMERG "R2 = %lx\n", pAd->LatchRfRegs.R2);
ate_print(KERN_EMERG "R3 = %lx\n", pAd->LatchRfRegs.R3);
ate_print(KERN_EMERG "R4 = %lx\n", pAd->LatchRfRegs.R4);
}
return TRUE;
}
INT Set_ATE_Write_RF1_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
if(IS_RT30xx(pAd))
{
printk("Warning!! RT30xx Don't Support\n");
return FALSE;
}
else
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
{
UINT32 value = simple_strtol(arg, 0, 16);
pAd->LatchRfRegs.R1 = value;
RtmpRfIoWrite(pAd);
}
return TRUE;
}
INT Set_ATE_Write_RF2_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
if(IS_RT30xx(pAd))
{
printk("Warning!! RT30xx Don't Support\n");
return FALSE;
}
else
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
{
UINT32 value = simple_strtol(arg, 0, 16);
pAd->LatchRfRegs.R2 = value;
RtmpRfIoWrite(pAd);
}
return TRUE;
}
INT Set_ATE_Write_RF3_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
if(IS_RT30xx(pAd))
{
printk("Warning!! RT30xx Don't Support\n");
return FALSE;
}
else
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
{
UINT32 value = simple_strtol(arg, 0, 16);
pAd->LatchRfRegs.R3 = value;
RtmpRfIoWrite(pAd);
}
return TRUE;
}
INT Set_ATE_Write_RF4_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
if(IS_RT30xx(pAd))
{
printk("Warning!! RT30xx Don't Support\n");
return FALSE;
}
else
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
{
UINT32 value = simple_strtol(arg, 0, 16);
pAd->LatchRfRegs.R4 = value;
RtmpRfIoWrite(pAd);
}
return TRUE;
}
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
INT SET_ATE_3070RF_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
CHAR *this_char;
CHAR *value;
UINT32 Reg,RFValue;
if(IS_RT30xx(pAd))
{
printk("SET_ATE_3070RF_Proc=%s\n",arg);
this_char =arg;
if ((value = strchr(this_char, ':')) != NULL)
*value++ = 0;
Reg= simple_strtol(this_char, 0, 16);
RFValue= simple_strtol(value, 0, 16);
printk("RF Reg[%d]=%d\n",Reg,RFValue);
RT30xxWriteRFRegister(pAd, Reg,RFValue);
}
else
printk("Warning!! Only 3070 Support\n");
return TRUE;
}
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
/*
==========================================================================
Description:
Load and Write EEPROM from a binary file prepared in advance.
Return:
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
#ifndef UCOS
INT Set_ATE_Load_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
BOOLEAN ret = FALSE;
PUCHAR src = EEPROM_BIN_FILE_NAME;
struct file *srcf;
INT32 retval, orgfsuid, orgfsgid;
mm_segment_t orgfs;
USHORT WriteEEPROM[(EEPROM_SIZE/2)];
UINT32 FileLength = 0;
UINT32 value = simple_strtol(arg, 0, 10);
ATEDBGPRINT(RT_DEBUG_ERROR, ("===> %s (value=%d)\n\n", __FUNCTION__, value));
if (value > 0)
{
/* zero the e2p buffer */
NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
/* save uid and gid used for filesystem access.
** set user and group to 0 (root)
*/
orgfsuid = current->fsuid;
orgfsgid = current->fsgid;
/* as root */
current->fsuid = current->fsgid = 0;
orgfs = get_fs();
set_fs(KERNEL_DS);
do
{
/* open the bin file */
srcf = filp_open(src, O_RDONLY, 0);
if (IS_ERR(srcf))
{
ate_print("%s - Error %ld opening %s\n", __FUNCTION__, -PTR_ERR(srcf), src);
break;
}
/* the object must have a read method */
if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL))
{
ate_print("%s - %s does not have a read method\n", __FUNCTION__, src);
break;
}
/* read the firmware from the file *.bin */
FileLength = srcf->f_op->read(srcf,
(PUCHAR)WriteEEPROM,
EEPROM_SIZE,
&srcf->f_pos);
if (FileLength != EEPROM_SIZE)
{
ate_print("%s: error file length (=%d) in e2p.bin\n",
__FUNCTION__, FileLength);
break;
}
else
{
/* write the content of .bin file to EEPROM */
rt_ee_write_all(pAd, WriteEEPROM);
ret = TRUE;
}
break;
} while(TRUE);
/* close firmware file */
if (IS_ERR(srcf))
{
;
}
else
{
retval = filp_close(srcf, NULL);
if (retval)
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("--> Error %d closing %s\n", -retval, src));
}
}
/* restore */
set_fs(orgfs);
current->fsuid = orgfsuid;
current->fsgid = orgfsgid;
}
ATEDBGPRINT(RT_DEBUG_ERROR, ("<=== %s (ret=%d)\n", __FUNCTION__, ret));
return ret;
}
#else
INT Set_ATE_Load_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
USHORT WriteEEPROM[(EEPROM_SIZE/2)];
struct iwreq *wrq = (struct iwreq *)arg;
ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __FUNCTION__, wrq->u.data.length));
if (wrq->u.data.length != EEPROM_SIZE)
{
ate_print("%s: error length (=%d) from host\n",
__FUNCTION__, wrq->u.data.length);
return FALSE;
}
else/* (wrq->u.data.length == EEPROM_SIZE) */
{
/* zero the e2p buffer */
NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
/* fill the local buffer */
NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
do
{
/* write the content of .bin file to EEPROM */
rt_ee_write_all(pAd, WriteEEPROM);
} while(FALSE);
}
ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __FUNCTION__));
return TRUE;
}
#endif // !UCOS //
INT Set_ATE_Read_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
USHORT buffer[EEPROM_SIZE/2];
USHORT *p;
int i;
rt_ee_read_all(pAd, (USHORT *)buffer);
p = buffer;
for (i = 0; i < (EEPROM_SIZE/2); i++)
{
ate_print("%4.4x ", *p);
if (((i+1) % 16) == 0)
ate_print("\n");
p++;
}
return TRUE;
}
INT Set_ATE_Show_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
ate_print("Mode=%d\n", pAd->ate.Mode);
ate_print("TxPower0=%d\n", pAd->ate.TxPower0);
ate_print("TxPower1=%d\n", pAd->ate.TxPower1);
ate_print("TxAntennaSel=%d\n", pAd->ate.TxAntennaSel);
ate_print("RxAntennaSel=%d\n", pAd->ate.RxAntennaSel);
ate_print("BBPCurrentBW=%d\n", pAd->ate.TxWI.BW);
ate_print("GI=%d\n", pAd->ate.TxWI.ShortGI);
ate_print("MCS=%d\n", pAd->ate.TxWI.MCS);
ate_print("TxMode=%d\n", pAd->ate.TxWI.PHYMODE);
ate_print("Addr1=%02x:%02x:%02x:%02x:%02x:%02x\n",
pAd->ate.Addr1[0], pAd->ate.Addr1[1], pAd->ate.Addr1[2], pAd->ate.Addr1[3], pAd->ate.Addr1[4], pAd->ate.Addr1[5]);
ate_print("Addr2=%02x:%02x:%02x:%02x:%02x:%02x\n",
pAd->ate.Addr2[0], pAd->ate.Addr2[1], pAd->ate.Addr2[2], pAd->ate.Addr2[3], pAd->ate.Addr2[4], pAd->ate.Addr2[5]);
ate_print("Addr3=%02x:%02x:%02x:%02x:%02x:%02x\n",
pAd->ate.Addr3[0], pAd->ate.Addr3[1], pAd->ate.Addr3[2], pAd->ate.Addr3[3], pAd->ate.Addr3[4], pAd->ate.Addr3[5]);
ate_print("Channel=%d\n", pAd->ate.Channel);
ate_print("TxLength=%d\n", pAd->ate.TxLength);
ate_print("TxCount=%u\n", pAd->ate.TxCount);
ate_print("RFFreqOffset=%d\n", pAd->ate.RFFreqOffset);
ate_print(KERN_EMERG "Set_ATE_Show_Proc Success\n");
return TRUE;
}
INT Set_ATE_Help_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
ate_print("ATE=ATESTART, ATESTOP, TXCONT, TXCARR, TXFRAME, RXFRAME\n");
ate_print("ATEDA\n");
ate_print("ATESA\n");
ate_print("ATEBSSID\n");
ate_print("ATECHANNEL, range:0~14(unless A band !)\n");
ate_print("ATETXPOW0, set power level of antenna 1.\n");
ate_print("ATETXPOW1, set power level of antenna 2.\n");
ate_print("ATETXANT, set TX antenna. 0:all, 1:antenna one, 2:antenna two.\n");
ate_print("ATERXANT, set RX antenna.0:all, 1:antenna one, 2:antenna two, 3:antenna three.\n");
ate_print("ATETXFREQOFFSET, set frequency offset, range 0~63\n");
ate_print("ATETXBW, set BandWidth, 0:20MHz, 1:40MHz.\n");
ate_print("ATETXLEN, set Frame length, range 24~%d\n", (MAX_FRAME_SIZE - 34/* == 2312 */));
ate_print("ATETXCNT, set how many frame going to transmit.\n");
ate_print("ATETXMCS, set MCS, reference to rate table.\n");
ate_print("ATETXMODE, set Mode 0:CCK, 1:OFDM, 2:HT-Mix, 3:GreenField, reference to rate table.\n");
ate_print("ATETXGI, set GI interval, 0:Long, 1:Short\n");
ate_print("ATERXFER, 0:disable Rx Frame error rate. 1:enable Rx Frame error rate.\n");
ate_print("ATERRF, show all RF registers.\n");
ate_print("ATEWRF1, set RF1 register.\n");
ate_print("ATEWRF2, set RF2 register.\n");
ate_print("ATEWRF3, set RF3 register.\n");
ate_print("ATEWRF4, set RF4 register.\n");
ate_print("ATELDE2P, load EEPROM from .bin file.\n");
ate_print("ATERE2P, display all EEPROM content.\n");
ate_print("ATESHOW, display all parameters of ATE.\n");
ate_print("ATEHELP, online help.\n");
return TRUE;
}
/*
==========================================================================
Description:
AsicSwitchChannel() dedicated for ATE.
==========================================================================
*/
VOID ATEAsicSwitchChannel(
IN PRTMP_ADAPTER pAd)
{
UINT32 R2 = 0, R3 = DEFAULT_RF_TX_POWER, R4 = 0, Value = 0;
CHAR TxPwer = 0, TxPwer2 = 0;
UCHAR index, BbpValue = 0, R66 = 0x30;
RTMP_RF_REGS *RFRegTable;
UCHAR Channel;
#ifdef RALINK_28xx_QA
if ((pAd->ate.bQATxStart == TRUE) || (pAd->ate.bQARxStart == TRUE))
{
if (pAd->ate.Channel != pAd->LatchRfRegs.Channel)
{
pAd->ate.Channel = pAd->LatchRfRegs.Channel;
}
return;
}
else
#endif // RALINK_28xx_QA //
Channel = pAd->ate.Channel;
// Select antenna
AsicAntennaSelect(pAd, Channel);
// fill Tx power value
TxPwer = pAd->ate.TxPower0;
TxPwer2 = pAd->ate.TxPower1;
#ifdef RT30xx
//2008/07/10:KH add to support 3070 ATE<--
// The RF programming sequence is difference between 3xxx and 2xxx
// The 3070 is 1T1R. Therefore, we don't need to set the number of Tx/Rx path and the only job is to set the parameters of channels.
if (IS_RT30xx(pAd) && ((pAd->RfIcType == RFIC_3020) ||
(pAd->RfIcType == RFIC_3021) || (pAd->RfIcType == RFIC_3022) ||
(pAd->RfIcType == RFIC_2020)))
{
/* modify by WY for Read RF Reg. error */
UCHAR RFValue;
for (index = 0; index < NUM_OF_3020_CHNL; index++)
{
if (Channel == FreqItems3020[index].Channel)
{
// Programming channel parameters
RT30xxWriteRFRegister(pAd, RF_R02, FreqItems3020[index].N);
RT30xxWriteRFRegister(pAd, RF_R03, FreqItems3020[index].K);
RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RFValue);
RFValue = (RFValue & 0xFC) | FreqItems3020[index].R;
RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RFValue);
// Set Tx Power
RT30xxReadRFRegister(pAd, RF_R12, (PUCHAR)&RFValue);
RFValue = (RFValue & 0xE0) | TxPwer;
RT30xxWriteRFRegister(pAd, RF_R12, (UCHAR)RFValue);
// Set RF offset
RT30xxReadRFRegister(pAd, RF_R23, (PUCHAR)&RFValue);
//2008/08/06: KH modified "pAd->RFFreqOffset" to "pAd->ate.RFFreqOffset"
RFValue = (RFValue & 0x80) | pAd->ate.RFFreqOffset;
RT30xxWriteRFRegister(pAd, RF_R23, (UCHAR)RFValue);
// Set BW
if (pAd->ate.TxWI.BW == BW_40)
{
RFValue = pAd->Mlme.CaliBW40RfR24;
//DISABLE_11N_CHECK(pAd);
}
else
{
RFValue = pAd->Mlme.CaliBW20RfR24;
}
RT30xxWriteRFRegister(pAd, RF_R24, (UCHAR)RFValue);
// Enable RF tuning
RT30xxReadRFRegister(pAd, RF_R07, (PUCHAR)&RFValue);
RFValue = RFValue | 0x1;
RT30xxWriteRFRegister(pAd, RF_R07, (UCHAR)RFValue);
// latch channel for future usage.
pAd->LatchRfRegs.Channel = Channel;
break;
}
}
DBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%d, Pwr1=%d, %dT), N=0x%02X, K=0x%02X, R=0x%02X\n",
Channel,
pAd->RfIcType,
TxPwer,
TxPwer2,
pAd->Antenna.field.TxPath,
FreqItems3020[index].N,
FreqItems3020[index].K,
FreqItems3020[index].R));
}
else
//2008/07/10:KH add to support 3070 ATE-->
#endif // RT30xx //
{
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType)
{
/* But only 2850 and 2750 support 5.5GHz band... */
case RFIC_2820:
case RFIC_2850:
case RFIC_2720:
case RFIC_2750:
for (index = 0; index < NUM_OF_2850_CHNL; index++)
{
if (Channel == RFRegTable[index].Channel)
{
R2 = RFRegTable[index].R2;
if (pAd->Antenna.field.TxPath == 1)
{
R2 |= 0x4000; // If TXpath is 1, bit 14 = 1;
}
if (pAd->Antenna.field.RxPath == 2)
{
switch (pAd->ate.RxAntennaSel)
{
case 1:
R2 |= 0x20040;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x00;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
case 2:
R2 |= 0x10040;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x01;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
default:
R2 |= 0x40;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
/* Only enable two Antenna to receive. */
BbpValue |= 0x08;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
}
}
else if (pAd->Antenna.field.RxPath == 1)
{
R2 |= 0x20040; // write 1 to off RxPath
}
if (pAd->Antenna.field.TxPath == 2)
{
if (pAd->ate.TxAntennaSel == 1)
{
R2 |= 0x4000; // If TX Antenna select is 1 , bit 14 = 1; Disable Ant 2
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
BbpValue &= 0xE7; //11100111B
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
}
else if (pAd->ate.TxAntennaSel == 2)
{
R2 |= 0x8000; // If TX Antenna select is 2 , bit 15 = 1; Disable Ant 1
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
BbpValue &= 0xE7;
BbpValue |= 0x08;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
}
else
{
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BbpValue);
BbpValue &= 0xE7;
BbpValue |= 0x10;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BbpValue);
}
}
if (pAd->Antenna.field.RxPath == 3)
{
switch (pAd->ate.RxAntennaSel)
{
case 1:
R2 |= 0x20040;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x00;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
case 2:
R2 |= 0x10040;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x01;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
case 3:
R2 |= 0x30000;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x02;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
default:
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BbpValue);
BbpValue &= 0xE4;
BbpValue |= 0x10;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BbpValue);
break;
}
}
if (Channel > 14)
{
// initialize R3, R4
R3 = (RFRegTable[index].R3 & 0xffffc1ff);
R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15);
// According the Rory's suggestion to solve the middle range issue.
// 5.5G band power range: 0xF9~0X0F, TX0 Reg3 bit9/TX1 Reg4 bit6="0" means the TX power reduce 7dB
// R3
if ((TxPwer >= -7) && (TxPwer < 0))
{
TxPwer = (7+TxPwer);
TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
R3 |= (TxPwer << 10);
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer=%d \n", TxPwer));
}
else
{
TxPwer = (TxPwer > 0xF) ? (0xF) : (TxPwer);
R3 |= (TxPwer << 10) | (1 << 9);
}
// R4
if ((TxPwer2 >= -7) && (TxPwer2 < 0))
{
TxPwer2 = (7+TxPwer2);
TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
R4 |= (TxPwer2 << 7);
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATEAsicSwitchChannel: TxPwer2=%d \n", TxPwer2));
}
else
{
TxPwer2 = (TxPwer2 > 0xF) ? (0xF) : (TxPwer2);
R4 |= (TxPwer2 << 7) | (1 << 6);
}
}
else
{
R3 = (RFRegTable[index].R3 & 0xffffc1ff) | (TxPwer << 9); // set TX power0
R4 = (RFRegTable[index].R4 & (~0x001f87c0)) | (pAd->ate.RFFreqOffset << 15) | (TxPwer2 <<6);// Set freq offset & TxPwr1
}
// Based on BBP current mode before changing RF channel.
if (pAd->ate.TxWI.BW == BW_40)
{
R4 |=0x200000;
}
// Update variables
pAd->LatchRfRegs.Channel = Channel;
pAd->LatchRfRegs.R1 = RFRegTable[index].R1;
pAd->LatchRfRegs.R2 = R2;
pAd->LatchRfRegs.R3 = R3;
pAd->LatchRfRegs.R4 = R4;
RtmpRfIoWrite(pAd);
break;
}
}
break;
default:
break;
}
}
// Change BBP setting during switch from a->g, g->a
if (Channel <= 14)
{
ULONG TxPinCfg = 0x00050F0A;// 2007.10.09 by Brian : 0x0005050A ==> 0x00050F0A
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
/* For 1T/2R chip only... */
if (pAd->NicConfig2.field.ExternalLNAForG)
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x62);
}
else
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0x84);
}
// According the Rory's suggestion to solve the middle range issue.
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
ASSERT((BbpValue == 0x00));
if ((BbpValue != 0x00))
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
}
// 5.5GHz band selection PIN, bit1 and bit2 are complement
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
Value &= (~0x6);
Value |= (0x04);
RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
// Turn off unused PA or LNA when only 1T or 1R.
if (pAd->Antenna.field.TxPath == 1)
{
TxPinCfg &= 0xFFFFFFF3;
}
if (pAd->Antenna.field.RxPath == 1)
{
TxPinCfg &= 0xFFFFF3FF;
}
RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
}
else
{
ULONG TxPinCfg = 0x00050F05;//2007.10.09 by Brian : 0x00050505 ==> 0x00050F05
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, (0x37 - GET_LNA_GAIN(pAd)));
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, (0x37 - GET_LNA_GAIN(pAd)));
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, (0x37 - GET_LNA_GAIN(pAd)));
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R82, 0xF2);
// According the Rory's suggestion to solve the middle range issue.
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R86, &BbpValue);
ASSERT((BbpValue == 0x00));
if ((BbpValue != 0x00))
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x00);
}
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R91, &BbpValue);
ASSERT((BbpValue == 0x04));
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R92, &BbpValue);
ASSERT((BbpValue == 0x00));
// 5.5GHz band selection PIN, bit1 and bit2 are complement
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value);
Value &= (~0x6);
Value |= (0x02);
RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value);
// Turn off unused PA or LNA when only 1T or 1R.
if (pAd->Antenna.field.TxPath == 1)
{
TxPinCfg &= 0xFFFFFFF3;
}
if (pAd->Antenna.field.RxPath == 1)
{
TxPinCfg &= 0xFFFFF3FF;
}
RTMP_IO_WRITE32(pAd, TX_PIN_CFG, TxPinCfg);
}
// R66 should be set according to Channel and use 20MHz when scanning
if (Channel <= 14)
{
// BG band
R66 = 0x2E + GET_LNA_GAIN(pAd);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
else
{
// 5.5 GHz band
if (pAd->ate.TxWI.BW == BW_20)
{
R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
else
{
R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
}
//
// On 11A, We should delay and wait RF/BBP to be stable
// and the appropriate time should be 1000 micro seconds
// 2005/06/05 - On 11G, We also need this delay time. Otherwise it's difficult to pass the WHQL.
//
RTMPusecDelay(1000);
if (Channel > 14)
{
// When 5.5GHz band the LSB of TxPwr will be used to reduced 7dB or not.
ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
Channel,
pAd->RfIcType,
pAd->Antenna.field.TxPath,
pAd->LatchRfRegs.R1,
pAd->LatchRfRegs.R2,
pAd->LatchRfRegs.R3,
pAd->LatchRfRegs.R4));
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("SwitchChannel#%d(RF=%d, Pwr0=%u, Pwr1=%u, %dT) to , R1=0x%08lx, R2=0x%08lx, R3=0x%08lx, R4=0x%08lx\n",
Channel,
pAd->RfIcType,
(R3 & 0x00003e00) >> 9,
(R4 & 0x000007c0) >> 6,
pAd->Antenna.field.TxPath,
pAd->LatchRfRegs.R1,
pAd->LatchRfRegs.R2,
pAd->LatchRfRegs.R3,
pAd->LatchRfRegs.R4));
}
}
//
// In fact, no one will call this routine so far !
//
/*
==========================================================================
Description:
Gives CCK TX rate 2 more dB TX power.
This routine works only in ATE mode.
calculate desired Tx power in RF R3.Tx0~5, should consider -
0. if current radio is a noisy environment (pAd->DrsCounters.fNoisyEnvironment)
1. TxPowerPercentage
2. auto calibration based on TSSI feedback
3. extra 2 db for CCK
4. -10 db upon very-short distance (AvgRSSI >= -40db) to AP
NOTE: Since this routine requires the value of (pAd->DrsCounters.fNoisyEnvironment),
it should be called AFTER MlmeDynamicTxRateSwitching()
==========================================================================
*/
VOID ATEAsicAdjustTxPower(
IN PRTMP_ADAPTER pAd)
{
INT i, j;
CHAR DeltaPwr = 0;
BOOLEAN bAutoTxAgc = FALSE;
UCHAR TssiRef, *pTssiMinusBoundary, *pTssiPlusBoundary, TxAgcStep;
UCHAR BbpR49 = 0, idx;
PCHAR pTxAgcCompensate;
ULONG TxPwr[5];
CHAR Value;
/* no one calls this procedure so far */
if (pAd->ate.TxWI.BW == BW_40)
{
if (pAd->ate.Channel > 14)
{
TxPwr[0] = pAd->Tx40MPwrCfgABand[0];
TxPwr[1] = pAd->Tx40MPwrCfgABand[1];
TxPwr[2] = pAd->Tx40MPwrCfgABand[2];
TxPwr[3] = pAd->Tx40MPwrCfgABand[3];
TxPwr[4] = pAd->Tx40MPwrCfgABand[4];
}
else
{
TxPwr[0] = pAd->Tx40MPwrCfgGBand[0];
TxPwr[1] = pAd->Tx40MPwrCfgGBand[1];
TxPwr[2] = pAd->Tx40MPwrCfgGBand[2];
TxPwr[3] = pAd->Tx40MPwrCfgGBand[3];
TxPwr[4] = pAd->Tx40MPwrCfgGBand[4];
}
}
else
{
if (pAd->ate.Channel > 14)
{
TxPwr[0] = pAd->Tx20MPwrCfgABand[0];
TxPwr[1] = pAd->Tx20MPwrCfgABand[1];
TxPwr[2] = pAd->Tx20MPwrCfgABand[2];
TxPwr[3] = pAd->Tx20MPwrCfgABand[3];
TxPwr[4] = pAd->Tx20MPwrCfgABand[4];
}
else
{
TxPwr[0] = pAd->Tx20MPwrCfgGBand[0];
TxPwr[1] = pAd->Tx20MPwrCfgGBand[1];
TxPwr[2] = pAd->Tx20MPwrCfgGBand[2];
TxPwr[3] = pAd->Tx20MPwrCfgGBand[3];
TxPwr[4] = pAd->Tx20MPwrCfgGBand[4];
}
}
// TX power compensation for temperature variation based on TSSI.
// Do it per 4 seconds.
if (pAd->Mlme.OneSecPeriodicRound % 4 == 0)
{
if (pAd->ate.Channel <= 14)
{
/* bg channel */
bAutoTxAgc = pAd->bAutoTxAgcG;
TssiRef = pAd->TssiRefG;
pTssiMinusBoundary = &pAd->TssiMinusBoundaryG[0];
pTssiPlusBoundary = &pAd->TssiPlusBoundaryG[0];
TxAgcStep = pAd->TxAgcStepG;
pTxAgcCompensate = &pAd->TxAgcCompensateG;
}
else
{
/* a channel */
bAutoTxAgc = pAd->bAutoTxAgcA;
TssiRef = pAd->TssiRefA;
pTssiMinusBoundary = &pAd->TssiMinusBoundaryA[0];
pTssiPlusBoundary = &pAd->TssiPlusBoundaryA[0];
TxAgcStep = pAd->TxAgcStepA;
pTxAgcCompensate = &pAd->TxAgcCompensateA;
}
if (bAutoTxAgc)
{
/* BbpR49 is unsigned char */
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R49, &BbpR49);
/* (p) TssiPlusBoundaryG[0] = 0 = (m) TssiMinusBoundaryG[0] */
/* compensate: +4 +3 +2 +1 0 -1 -2 -3 -4 * steps */
/* step value is defined in pAd->TxAgcStepG for tx power value */
/* [4]+1+[4] p4 p3 p2 p1 o1 m1 m2 m3 m4 */
/* ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0
above value are examined in mass factory production */
/* [4] [3] [2] [1] [0] [1] [2] [3] [4] */
/* plus is 0x10 ~ 0x40, minus is 0x60 ~ 0x90 */
/* if value is between p1 ~ o1 or o1 ~ s1, no need to adjust tx power */
/* if value is 0x65, tx power will be -= TxAgcStep*(2-1) */
if (BbpR49 > pTssiMinusBoundary[1])
{
// Reading is larger than the reference value.
// Check for how large we need to decrease the Tx power.
for (idx = 1; idx < 5; idx++)
{
if (BbpR49 <= pTssiMinusBoundary[idx]) // Found the range
break;
}
// The index is the step we should decrease, idx = 0 means there is nothing to compensate
// if (R3 > (ULONG) (TxAgcStep * (idx-1)))
*pTxAgcCompensate = -(TxAgcStep * (idx-1));
// else
// *pTxAgcCompensate = -((UCHAR)R3);
DeltaPwr += (*pTxAgcCompensate);
ATEDBGPRINT(RT_DEBUG_TRACE, ("-- Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = -%d\n",
BbpR49, TssiRef, TxAgcStep, idx-1));
}
else if (BbpR49 < pTssiPlusBoundary[1])
{
// Reading is smaller than the reference value
// check for how large we need to increase the Tx power
for (idx = 1; idx < 5; idx++)
{
if (BbpR49 >= pTssiPlusBoundary[idx]) // Found the range
break;
}
// The index is the step we should increase, idx = 0 means there is nothing to compensate
*pTxAgcCompensate = TxAgcStep * (idx-1);
DeltaPwr += (*pTxAgcCompensate);
ATEDBGPRINT(RT_DEBUG_TRACE, ("++ Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
BbpR49, TssiRef, TxAgcStep, idx-1));
}
else
{
*pTxAgcCompensate = 0;
ATEDBGPRINT(RT_DEBUG_TRACE, (" Tx Power, BBP R1=%x, TssiRef=%x, TxAgcStep=%x, step = +%d\n",
BbpR49, TssiRef, TxAgcStep, 0));
}
}
}
else
{
if (pAd->ate.Channel <= 14)
{
bAutoTxAgc = pAd->bAutoTxAgcG;
pTxAgcCompensate = &pAd->TxAgcCompensateG;
}
else
{
bAutoTxAgc = pAd->bAutoTxAgcA;
pTxAgcCompensate = &pAd->TxAgcCompensateA;
}
if (bAutoTxAgc)
DeltaPwr += (*pTxAgcCompensate);
}
/* calculate delta power based on the percentage specified from UI */
// E2PROM setting is calibrated for maximum TX power (i.e. 100%)
// We lower TX power here according to the percentage specified from UI
if (pAd->CommonCfg.TxPowerPercentage == 0xffffffff) // AUTO TX POWER control
;
else if (pAd->CommonCfg.TxPowerPercentage > 90) // 91 ~ 100% & AUTO, treat as 100% in terms of mW
;
else if (pAd->CommonCfg.TxPowerPercentage > 60) // 61 ~ 90%, treat as 75% in terms of mW
{
DeltaPwr -= 1;
}
else if (pAd->CommonCfg.TxPowerPercentage > 30) // 31 ~ 60%, treat as 50% in terms of mW
{
DeltaPwr -= 3;
}
else if (pAd->CommonCfg.TxPowerPercentage > 15) // 16 ~ 30%, treat as 25% in terms of mW
{
DeltaPwr -= 6;
}
else if (pAd->CommonCfg.TxPowerPercentage > 9) // 10 ~ 15%, treat as 12.5% in terms of mW
{
DeltaPwr -= 9;
}
else // 0 ~ 9 %, treat as MIN(~3%) in terms of mW
{
DeltaPwr -= 12;
}
/* reset different new tx power for different TX rate */
for(i=0; i<5; i++)
{
if (TxPwr[i] != 0xffffffff)
{
for (j=0; j<8; j++)
{
Value = (CHAR)((TxPwr[i] >> j*4) & 0x0F); /* 0 ~ 15 */
if ((Value + DeltaPwr) < 0)
{
Value = 0; /* min */
}
else if ((Value + DeltaPwr) > 0xF)
{
Value = 0xF; /* max */
}
else
{
Value += DeltaPwr; /* temperature compensation */
}
/* fill new value to CSR offset */
TxPwr[i] = (TxPwr[i] & ~(0x0000000F << j*4)) | (Value << j*4);
}
/* write tx power value to CSR */
/* TX_PWR_CFG_0 (8 tx rate) for TX power for OFDM 12M/18M
TX power for OFDM 6M/9M
TX power for CCK5.5M/11M
TX power for CCK1M/2M */
/* TX_PWR_CFG_1 ~ TX_PWR_CFG_4 */
RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, TxPwr[i]);
}
}
}
/*
========================================================================
Routine Description:
Write TxWI for ATE mode.
Return Value:
None
========================================================================
*/
#ifdef RT2870
static VOID ATEWriteTxWI(
IN PRTMP_ADAPTER pAd,
IN PTXWI_STRUC pTxWI,
IN BOOLEAN FRAG,
IN BOOLEAN InsTimestamp,
IN BOOLEAN AMPDU,
IN BOOLEAN Ack,
IN BOOLEAN NSeq, // HW new a sequence.
IN UCHAR BASize,
IN UCHAR WCID,
IN ULONG Length,
IN UCHAR PID,
IN UCHAR MIMOps,
IN UCHAR Txopmode,
IN BOOLEAN CfAck,
IN HTTRANSMIT_SETTING Transmit)
{
//
// Always use Long preamble before verifiation short preamble functionality works well.
// Todo: remove the following line if short preamble functionality works
//
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);
pTxWI->FRAG= FRAG;
pTxWI->TS= InsTimestamp;
pTxWI->AMPDU = AMPDU;
pTxWI->MIMOps = PWR_ACTIVE;
pTxWI->MpduDensity = 4;
pTxWI->ACK = Ack;
pTxWI->txop = Txopmode;
pTxWI->NSEQ = NSeq;
pTxWI->BAWinSize = BASize;
pTxWI->WirelessCliID = WCID;
pTxWI->MPDUtotalByteCount = Length;
pTxWI->PacketId = PID;
pTxWI->BW = Transmit.field.BW;
pTxWI->ShortGI = Transmit.field.ShortGI;
pTxWI->STBC= Transmit.field.STBC;
pTxWI->MCS = Transmit.field.MCS;
pTxWI->PHYMODE= Transmit.field.MODE;
#ifdef DOT11_N_SUPPORT
//
// MMPS is 802.11n features. Because TxWI->MCS > 7 must be HT mode,
// so need not check if it's HT rate.
//
if ((MIMOps == MMPS_STATIC) && (pTxWI->MCS > 7))
pTxWI->MCS = 7;
if ((MIMOps == MMPS_DYNAMIC) && (pTxWI->MCS > 7)) // SMPS protect 2 spatial.
pTxWI->MIMOps = 1;
#endif // DOT11_N_SUPPORT //
pTxWI->CFACK = CfAck;
return;
}
#endif // RT2870 //
/*
========================================================================
Routine Description:
Disable protection for ATE.
========================================================================
*/
VOID ATEDisableAsicProtect(
IN PRTMP_ADAPTER pAd)
{
PROT_CFG_STRUC ProtCfg, ProtCfg4;
UINT32 Protect[6];
USHORT offset;
UCHAR i;
UINT32 MacReg = 0;
// Config ASIC RTS threshold register
RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
MacReg &= 0xFF0000FF;
MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
// Initial common protection settings
RTMPZeroMemory(Protect, sizeof(Protect));
ProtCfg4.word = 0;
ProtCfg.word = 0;
ProtCfg.field.TxopAllowGF40 = 1;
ProtCfg.field.TxopAllowGF20 = 1;
ProtCfg.field.TxopAllowMM40 = 1;
ProtCfg.field.TxopAllowMM20 = 1;
ProtCfg.field.TxopAllowOfdm = 1;
ProtCfg.field.TxopAllowCck = 1;
ProtCfg.field.RTSThEn = 1;
ProtCfg.field.ProtectNav = ASIC_SHORTNAV;
// Handle legacy(B/G) protection
ProtCfg.field.ProtectRate = pAd->CommonCfg.RtsRate;
ProtCfg.field.ProtectCtrl = 0;
Protect[0] = ProtCfg.word;
Protect[1] = ProtCfg.word;
// NO PROTECT
// 1.All STAs in the BSS are 20/40 MHz HT
// 2. in ai 20/40MHz BSS
// 3. all STAs are 20MHz in a 20MHz BSS
// Pure HT. no protection.
// MM20_PROT_CFG
// Reserved (31:27)
// PROT_TXOP(25:20) -- 010111
// PROT_NAV(19:18) -- 01 (Short NAV protection)
// PROT_CTRL(17:16) -- 00 (None)
// PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
Protect[2] = 0x01744004;
// MM40_PROT_CFG
// Reserved (31:27)
// PROT_TXOP(25:20) -- 111111
// PROT_NAV(19:18) -- 01 (Short NAV protection)
// PROT_CTRL(17:16) -- 00 (None)
// PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
Protect[3] = 0x03f44084;
// CF20_PROT_CFG
// Reserved (31:27)
// PROT_TXOP(25:20) -- 010111
// PROT_NAV(19:18) -- 01 (Short NAV protection)
// PROT_CTRL(17:16) -- 00 (None)
// PROT_RATE(15:0) -- 0x4004 (OFDM 24M)
Protect[4] = 0x01744004;
// CF40_PROT_CFG
// Reserved (31:27)
// PROT_TXOP(25:20) -- 111111
// PROT_NAV(19:18) -- 01 (Short NAV protection)
// PROT_CTRL(17:16) -- 00 (None)
// PROT_RATE(15:0) -- 0x4084 (duplicate OFDM 24M)
Protect[5] = 0x03f44084;
pAd->CommonCfg.IOTestParm.bRTSLongProtOn = FALSE;
offset = CCK_PROT_CFG;
for (i = 0;i < 6;i++)
RTMP_IO_WRITE32(pAd, offset + i*4, Protect[i]);
}
#ifdef RT2870
/*
========================================================================
Routine Description:
Write TxInfo for ATE mode.
Return Value:
None
========================================================================
*/
static VOID ATEWriteTxInfo(
IN PRTMP_ADAPTER pAd,
IN PTXINFO_STRUC pTxInfo,
IN USHORT USBDMApktLen,
IN BOOLEAN bWiv,
IN UCHAR QueueSel,
IN UCHAR NextValid,
IN UCHAR TxBurst)
{
pTxInfo->USBDMATxPktLen = USBDMApktLen;
pTxInfo->QSEL = QueueSel;
if (QueueSel != FIFO_EDCA)
ATEDBGPRINT(RT_DEBUG_TRACE, ("=======> QueueSel != FIFO_EDCA<=======\n"));
pTxInfo->USBDMANextVLD = NextValid;
pTxInfo->USBDMATxburst = TxBurst;
pTxInfo->WIV = bWiv;
pTxInfo->SwUseLastRound = 0;
pTxInfo->rsv = 0;
pTxInfo->rsv2 = 0;
return;
}
#endif // RT2870 //
/* There are two ways to convert Rssi */
#if 1
//
// The way used with GET_LNA_GAIN().
//
CHAR ATEConvertToRssi(
IN PRTMP_ADAPTER pAd,
IN CHAR Rssi,
IN UCHAR RssiNumber)
{
UCHAR RssiOffset, LNAGain;
// Rssi equals to zero should be an invalid value
if (Rssi == 0)
return -99;
LNAGain = GET_LNA_GAIN(pAd);
if (pAd->LatchRfRegs.Channel > 14)
{
if (RssiNumber == 0)
RssiOffset = pAd->ARssiOffset0;
else if (RssiNumber == 1)
RssiOffset = pAd->ARssiOffset1;
else
RssiOffset = pAd->ARssiOffset2;
}
else
{
if (RssiNumber == 0)
RssiOffset = pAd->BGRssiOffset0;
else if (RssiNumber == 1)
RssiOffset = pAd->BGRssiOffset1;
else
RssiOffset = pAd->BGRssiOffset2;
}
return (-12 - RssiOffset - LNAGain - Rssi);
}
#else
//
// The way originally used in ATE of rt2860ap.
//
CHAR ATEConvertToRssi(
IN PRTMP_ADAPTER pAd,
IN CHAR Rssi,
IN UCHAR RssiNumber)
{
UCHAR RssiOffset, LNAGain;
// Rssi equals to zero should be an invalid value
if (Rssi == 0)
return -99;
if (pAd->LatchRfRegs.Channel > 14)
{
LNAGain = pAd->ALNAGain;
if (RssiNumber == 0)
RssiOffset = pAd->ARssiOffset0;
else if (RssiNumber == 1)
RssiOffset = pAd->ARssiOffset1;
else
RssiOffset = pAd->ARssiOffset2;
}
else
{
LNAGain = pAd->BLNAGain;
if (RssiNumber == 0)
RssiOffset = pAd->BGRssiOffset0;
else if (RssiNumber == 1)
RssiOffset = pAd->BGRssiOffset1;
else
RssiOffset = pAd->BGRssiOffset2;
}
return (-32 - RssiOffset + LNAGain - Rssi);
}
#endif /* end of #if 1 */
/*
========================================================================
Routine Description:
Set Japan filter coefficients if needed.
Note:
This routine should only be called when
entering TXFRAME mode or TXCONT mode.
========================================================================
*/
static VOID SetJapanFilter(
IN PRTMP_ADAPTER pAd)
{
UCHAR BbpData = 0;
//
// If Channel=14 and Bandwidth=20M and Mode=CCK, set BBP R4 bit5=1
// (Japan Tx filter coefficients)when (TXFRAME or TXCONT).
//
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BbpData);
if ((pAd->ate.TxWI.PHYMODE == MODE_CCK) && (pAd->ate.Channel == 14) && (pAd->ate.TxWI.BW == BW_20))
{
BbpData |= 0x20; // turn on
ATEDBGPRINT(RT_DEBUG_TRACE, ("SetJapanFilter!!!\n"));
}
else
{
BbpData &= 0xdf; // turn off
ATEDBGPRINT(RT_DEBUG_TRACE, ("ClearJapanFilter!!!\n"));
}
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BbpData);
}
VOID ATESampleRssi(
IN PRTMP_ADAPTER pAd,
IN PRXWI_STRUC pRxWI)
{
/* There are two ways to collect RSSI. */
#if 1
//pAd->LastRxRate = (USHORT)((pRxWI->MCS) + (pRxWI->BW <<7) + (pRxWI->ShortGI <<8)+ (pRxWI->PHYMODE <<14)) ;
if (pRxWI->RSSI0 != 0)
{
pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
}
if (pRxWI->RSSI1 != 0)
{
pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
}
if (pRxWI->RSSI2 != 0)
{
pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
}
pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);// CHAR ==> UCHAR ?
pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);// CHAR ==> UCHAR ?
pAd->ate.NumOfAvgRssiSample ++;
#else
pAd->ate.LastSNR0 = (CHAR)(pRxWI->SNR0);
pAd->ate.LastSNR1 = (CHAR)(pRxWI->SNR1);
pAd->ate.RxCntPerSec++;
pAd->ate.LastRssi0 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI0, RSSI_0);
pAd->ate.LastRssi1 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI1, RSSI_1);
pAd->ate.LastRssi2 = ATEConvertToRssi(pAd, (CHAR) pRxWI->RSSI2, RSSI_2);
pAd->ate.AvgRssi0X8 = (pAd->ate.AvgRssi0X8 - pAd->ate.AvgRssi0) + pAd->ate.LastRssi0;
pAd->ate.AvgRssi0 = pAd->ate.AvgRssi0X8 >> 3;
pAd->ate.AvgRssi1X8 = (pAd->ate.AvgRssi1X8 - pAd->ate.AvgRssi1) + pAd->ate.LastRssi1;
pAd->ate.AvgRssi1 = pAd->ate.AvgRssi1X8 >> 3;
pAd->ate.AvgRssi2X8 = (pAd->ate.AvgRssi2X8 - pAd->ate.AvgRssi2) + pAd->ate.LastRssi2;
pAd->ate.AvgRssi2 = pAd->ate.AvgRssi2X8 >> 3;
pAd->ate.NumOfAvgRssiSample ++;
#endif
}
#ifdef CONFIG_STA_SUPPORT
VOID RTMPStationStop(
IN PRTMP_ADAPTER pAd)
{
// BOOLEAN Cancelled;
ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStop\n"));
// For rx statistics, we need to keep this timer running.
// RTMPCancelTimer(&pAd->Mlme.PeriodicTimer, &Cancelled);
ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStop\n"));
}
VOID RTMPStationStart(
IN PRTMP_ADAPTER pAd)
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
}
#endif // CONFIG_STA_SUPPORT //
/*
==========================================================================
Description:
Setup Frame format.
NOTE:
This routine should only be used in ATE mode.
==========================================================================
*/
#ifdef RT2870
/*======================Start of RT2870======================*/
/* */
/* */
static INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
{
UINT j;
PTX_CONTEXT pNullContext;
PUCHAR pDest;
HTTRANSMIT_SETTING TxHTPhyMode;
PTXWI_STRUC pTxWI;
PTXINFO_STRUC pTxInfo;
UINT32 TransferBufferLength, OrgBufferLength = 0;
UCHAR padLen = 0;
#ifdef RALINK_28xx_QA
PHEADER_802_11 pHeader80211 = NULL;
#endif // RALINK_28xx_QA //
if ((RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) ||
(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
return -1;
}
/* We always use QID_AC_BE and FIFO_EDCA in ATE mode. */
pNullContext = &(pAd->NullContext);
ASSERT(pNullContext != NULL);
if (pNullContext->InUse == FALSE)
{
// Set the in use bit
pNullContext->InUse = TRUE;
NdisZeroMemory(&(pAd->NullFrame), sizeof(HEADER_802_11));
// Fill 802.11 header.
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
pHeader80211 = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
// pDest = NdisMoveMemory(&(pAd->NullFrame), pAd->ate.Header, pAd->ate.HLen);
// pHeader80211 = (PHEADER_802_11)pDest;
}
else
#endif // RALINK_28xx_QA //
{
// Fill 802.11 header.
NdisMoveMemory(&(pAd->NullFrame), TemplateFrame, sizeof(HEADER_802_11));
}
#ifdef RT_BIG_ENDIAN
RTMPFrameEndianChange(pAd, (PUCHAR)&(pAd->NullFrame), DIR_READ, FALSE);
#endif // RT_BIG_ENDIAN //
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
/* modify sequence number.... */
if (pAd->ate.TxDoneCount == 0)
{
pAd->ate.seq = pHeader80211->Sequence;
}
else
{
pHeader80211->Sequence = ++pAd->ate.seq;
}
/* We already got all the addr. fields from QA GUI. */
}
else
#endif // RALINK_28xx_QA //
{
COPY_MAC_ADDR(pAd->NullFrame.Addr1, pAd->ate.Addr1);
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->ate.Addr2);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->ate.Addr3);
}
RTMPZeroMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[0], TX_BUFFER_NORMSIZE);//???
pTxInfo = (PTXINFO_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[0];
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
// Avoid to exceed the range of WirelessPacket[].
ASSERT(pAd->ate.TxInfo.USBDMATxPktLen <= (MAX_FRAME_SIZE - 34/* == 2312 */));
NdisMoveMemory(pTxInfo, &(pAd->ate.TxInfo), sizeof(pAd->ate.TxInfo));
}
else
#endif // RALINK_28xx_QA //
{
// Avoid to exceed the range of WirelessPacket[].
ASSERT(pAd->ate.TxLength <= (MAX_FRAME_SIZE - 34/* == 2312 */));
// pTxInfo->USBDMATxPktLen will be updated to include padding later.
ATEWriteTxInfo(pAd, pTxInfo, (USHORT)(TXWI_SIZE + pAd->ate.TxLength), TRUE, EpToQueue[MGMTPIPEIDX], FALSE, FALSE);
pTxInfo->QSEL = FIFO_EDCA;
}
pTxWI = (PTXWI_STRUC)&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE];
// Fill TxWI.
if (pAd->ate.bQATxStart == TRUE)
{
TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
TxHTPhyMode.field.STBC = pAd->ate.TxWI.STBC;
TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
ATEWriteTxWI(pAd, pTxWI, pAd->ate.TxWI.FRAG, pAd->ate.TxWI.TS, pAd->ate.TxWI.AMPDU, pAd->ate.TxWI.ACK, pAd->ate.TxWI.NSEQ,
pAd->ate.TxWI.BAWinSize, BSSID_WCID, pAd->ate.TxWI.MPDUtotalByteCount/* include 802.11 header */, pAd->ate.TxWI.PacketId, 0, pAd->ate.TxWI.txop/*IFS_HTTXOP*/, pAd->ate.TxWI.CFACK/*FALSE*/, TxHTPhyMode);
}
else
{
TxHTPhyMode.field.BW = pAd->ate.TxWI.BW;
TxHTPhyMode.field.ShortGI = pAd->ate.TxWI.ShortGI;
TxHTPhyMode.field.STBC = 0;
TxHTPhyMode.field.MCS = pAd->ate.TxWI.MCS;
TxHTPhyMode.field.MODE = pAd->ate.TxWI.PHYMODE;
ATEWriteTxWI(pAd, pTxWI, FALSE, FALSE, FALSE, FALSE/* No ack required. */, FALSE, 0, BSSID_WCID, pAd->ate.TxLength,
0, 0, IFS_HTTXOP, FALSE, TxHTPhyMode);// "MMPS_STATIC" instead of "MMPS_DYNAMIC" ???
}
RTMPMoveMemory(&pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE], &pAd->NullFrame, sizeof(HEADER_802_11));
pDest = &(pAd->NullContext.TransferBuffer->field.WirelessPacket[TXINFO_SIZE+TXWI_SIZE+sizeof(HEADER_802_11)]);
// Prepare frame payload
#ifdef RALINK_28xx_QA
if (pAd->ate.bQATxStart == TRUE)
{
// copy pattern
if ((pAd->ate.PLen != 0))
{
for (j = 0; j < pAd->ate.DLen; j+=pAd->ate.PLen)
{
RTMPMoveMemory(pDest, pAd->ate.Pattern, pAd->ate.PLen);
pDest += pAd->ate.PLen;
}
}
TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxWI.MPDUtotalByteCount;
}
else
#endif // RALINK_28xx_QA //
{
for (j = 0; j < (pAd->ate.TxLength - sizeof(HEADER_802_11)); j++)
{
*pDest = 0xA5;
pDest += 1;
}
TransferBufferLength = TXINFO_SIZE + TXWI_SIZE + pAd->ate.TxLength;
}
#if 1
OrgBufferLength = TransferBufferLength;
TransferBufferLength = (TransferBufferLength + 3) & (~3);
// Always add 4 extra bytes at every packet.
padLen = TransferBufferLength - OrgBufferLength + 4;/* 4 == last packet padding */
ASSERT((padLen <= (RTMP_PKT_TAIL_PADDING - 4/* 4 == MaxBulkOutsize alignment padding */)));
/* Now memzero all extra padding bytes. */
NdisZeroMemory(pDest, padLen);
pDest += padLen;
#else
if ((TransferBufferLength % 4) == 1)
{
NdisZeroMemory(pDest, 7);
pDest += 7;
TransferBufferLength += 3;
}
else if ((TransferBufferLength % 4) == 2)
{
NdisZeroMemory(pDest, 6);
pDest += 6;
TransferBufferLength += 2;
}
else if ((TransferBufferLength % 4) == 3)
{
NdisZeroMemory(pDest, 5);
pDest += 5;
TransferBufferLength += 1;
}
#endif // 1 //
// Update pTxInfo->USBDMATxPktLen to include padding.
pTxInfo->USBDMATxPktLen = TransferBufferLength - TXINFO_SIZE;
TransferBufferLength += 4;
// If TransferBufferLength is multiple of 64, add extra 4 bytes again.
if ((TransferBufferLength % pAd->BulkOutMaxPacketSize) == 0)
{
NdisZeroMemory(pDest, 4);
TransferBufferLength += 4;
}
// Fill out frame length information for global Bulk out arbitor
pAd->NullContext.BulkOutSize = TransferBufferLength;
}
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)pTxWI, TYPE_TXWI);
RTMPFrameEndianChange(pAd, (((PUCHAR)pTxInfo)+TXWI_SIZE+TXINFO_SIZE), DIR_WRITE, FALSE);
RTMPDescriptorEndianChange((PUCHAR)pTxInfo, TYPE_TXINFO);
#endif // RT_BIG_ENDIAN //
return 0;
}
VOID ATE_RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs *pt_regs)
{
PRTMP_ADAPTER pAd;
PTX_CONTEXT pNullContext;
UCHAR BulkOutPipeId;
NTSTATUS Status;
unsigned long IrqFlags;
ULONG OldValue;
pNullContext = (PTX_CONTEXT)pUrb->context;
pAd = pNullContext->pAd;
// Reset Null frame context flags
pNullContext->IRPPending = FALSE;
pNullContext->InUse = FALSE;
Status = pUrb->status;
// Store BulkOut PipeId
BulkOutPipeId = pNullContext->BulkOutPipeId;
pAd->BulkOutDataOneSecCount++;
if (Status == USB_ST_NOERROR)
{
#ifdef RALINK_28xx_QA
if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
{
if (pAd->ate.QID == BulkOutPipeId)
{
// Let Rx can have a chance to break in during Tx process,
// especially for loopback mode in QA ATE.
// To trade off between tx performance and loopback mode integrity.
/* Q : Now Rx is handled by tasklet, do we still need this delay ? */
/* Ans : Even tasklet is used, Rx/Tx < 1 if we do not delay for a while right here. */
RTMPusecDelay(500);
pAd->ate.TxDoneCount++;
pAd->RalinkCounters.KickTxCount++;
ASSERT(pAd->ate.QID == 0);
pAd->ate.TxAc0++;
}
}
#endif // RALINK_28xx_QA //
pAd->BulkOutComplete++;
pAd->Counters8023.GoodTransmits++;
/* Don't worry about the queue is empty or not. This function will check itself. */
RTMPDeQueuePacket(pAd, TRUE, BulkOutPipeId, MAX_TX_PROCESS);
/* In 28xx, SendTxWaitQueue ==> TxSwQueue */
/*
if (pAd->SendTxWaitQueue[BulkOutPipeId].Number > 0)
{
RTMPDeQueuePacket(pAd, BulkOutPipeId);
}
*/
}
else // STATUS_OTHER
{
pAd->BulkOutCompleteOther++;
ATEDBGPRINT(RT_DEBUG_ERROR, ("BulkOutDataPacket Failed STATUS_OTHER = 0x%x . \n", Status));
ATEDBGPRINT(RT_DEBUG_ERROR, (">>BulkOutReq=0x%lx, BulkOutComplete=0x%lx\n", pAd->BulkOutReq, pAd->BulkOutComplete));
if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)))
{
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
/* In 28xx, RT_OID_USB_RESET_BULK_OUT ==> CMDTHREAD_RESET_BULK_OUT */
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0);
// Check
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
pAd->bulkResetPipeid = BulkOutPipeId;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
}
if (atomic_read(&pAd->BulkOutRemained) > 0)
{
atomic_dec(&pAd->BulkOutRemained);
}
// 1st - Transmit Success
OldValue = pAd->WlanCounters.TransmittedFragmentCount.u.LowPart;
pAd->WlanCounters.TransmittedFragmentCount.u.LowPart++;
if (pAd->WlanCounters.TransmittedFragmentCount.u.LowPart < OldValue)
{
pAd->WlanCounters.TransmittedFragmentCount.u.HighPart++;
}
if(((pAd->ContinBulkOut == TRUE ) ||(atomic_read(&pAd->BulkOutRemained) > 0)) && (pAd->ate.Mode & ATE_TXFRAME))
{
RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
}
else
{
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
#ifdef RALINK_28xx_QA
pAd->ate.TxStatus = 0;
#endif // RALINK_28xx_QA //
}
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
pAd->BulkOutPending[BulkOutPipeId] = FALSE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
// Always call Bulk routine, even reset bulk.
// The protection of rest bulk should be in BulkOut routine.
RTUSBKickBulkOut(pAd);
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID ATE_RTUSBBulkOutDataPacket(
IN PRTMP_ADAPTER pAd,
IN UCHAR BulkOutPipeId)
{
PTX_CONTEXT pNullContext = &(pAd->NullContext);
PURB pUrb;
int ret = 0;
unsigned long IrqFlags;
ASSERT(BulkOutPipeId == 0);
/* Build up the frame first. */
// ATESetUpFrame(pAd, 0);
BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
if (pAd->BulkOutPending[BulkOutPipeId] == TRUE)
{
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
return;
}
pAd->BulkOutPending[BulkOutPipeId] = TRUE;
BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags);
// Increase Total transmit byte counter
pAd->RalinkCounters.OneSecTransmittedByteCount += pNullContext->BulkOutSize;
pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize;
// Clear ATE frame bulk out flag
RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_ATE);
// Init Tx context descriptor
pNullContext->IRPPending = TRUE;
RTUSBInitTxDesc(pAd, pNullContext, BulkOutPipeId, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);
pUrb = pNullContext->pUrb;
if((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
return;
}
pAd->BulkOutReq++;
return;
}
/*
========================================================================
Routine Description:
Arguments:
Return Value:
Note:
========================================================================
*/
VOID ATE_RTUSBCancelPendingBulkInIRP(
IN PRTMP_ADAPTER pAd)
{
PRX_CONTEXT pRxContext;
UINT i;
ATEDBGPRINT(RT_DEBUG_TRACE, ("--->ATE_RTUSBCancelPendingBulkInIRP\n"));
#if 1
for ( i = 0; i < (RX_RING_SIZE); i++)
{
pRxContext = &(pAd->RxContext[i]);
if(pRxContext->IRPPending == TRUE)
{
RTUSB_UNLINK_URB(pRxContext->pUrb);
pRxContext->IRPPending = FALSE;
pRxContext->InUse = FALSE;
//NdisInterlockedDecrement(&pAd->PendingRx);
//pAd->PendingRx--;
}
}
#else
for ( i = 0; i < (RX_RING_SIZE); i++)
{
pRxContext = &(pAd->RxContext[i]);
if(atomic_read(&pRxContext->IrpLock) == IRPLOCK_CANCELABLE)
{
RTUSB_UNLINK_URB(pRxContext->pUrb);
}
InterlockedExchange(&pRxContext->IrpLock, IRPLOCK_CANCE_START);
}
#endif // 1 //
ATEDBGPRINT(RT_DEBUG_TRACE, ("<---ATE_RTUSBCancelPendingBulkInIRP\n"));
return;
}
#endif // RT2870 //
VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
{
USHORT i;
USHORT value;
for (i = 0 ; i < EEPROM_SIZE/2 ; )
{
/* "value" is expecially for some compilers... */
RT28xx_EEPROM_READ16(pAd, i*2, value);
Data[i] = value;
i++;
}
}
VOID rt_ee_write_all(PRTMP_ADAPTER pAd, USHORT *Data)
{
USHORT i;
USHORT value;
for (i = 0 ; i < EEPROM_SIZE/2 ; )
{
/* "value" is expecially for some compilers... */
value = Data[i];
RT28xx_EEPROM_WRITE16(pAd, i*2, value);
i ++;
}
}
#ifdef RALINK_28xx_QA
VOID ATE_QA_Statistics(
IN PRTMP_ADAPTER pAd,
IN PRXWI_STRUC pRxWI,
IN PRT28XX_RXD_STRUC pRxD,
IN PHEADER_802_11 pHeader)
{
// update counter first
if (pHeader != NULL)
{
if (pHeader->FC.Type == BTYPE_DATA)
{
if (pRxD->U2M)
pAd->ate.U2M++;
else
pAd->ate.OtherData++;
}
else if (pHeader->FC.Type == BTYPE_MGMT)
{
if (pHeader->FC.SubType == SUBTYPE_BEACON)
pAd->ate.Beacon++;
else
pAd->ate.OtherCount++;
}
else if (pHeader->FC.Type == BTYPE_CNTL)
{
pAd->ate.OtherCount++;
}
}
pAd->ate.RSSI0 = pRxWI->RSSI0;
pAd->ate.RSSI1 = pRxWI->RSSI1;
pAd->ate.RSSI2 = pRxWI->RSSI2;
pAd->ate.SNR0 = pRxWI->SNR0;
pAd->ate.SNR1 = pRxWI->SNR1;
}
/* command id with Cmd Type == 0x0008(for 28xx)/0x0005(for iNIC) */
#define RACFG_CMD_RF_WRITE_ALL 0x0000
#define RACFG_CMD_E2PROM_READ16 0x0001
#define RACFG_CMD_E2PROM_WRITE16 0x0002
#define RACFG_CMD_E2PROM_READ_ALL 0x0003
#define RACFG_CMD_E2PROM_WRITE_ALL 0x0004
#define RACFG_CMD_IO_READ 0x0005
#define RACFG_CMD_IO_WRITE 0x0006
#define RACFG_CMD_IO_READ_BULK 0x0007
#define RACFG_CMD_BBP_READ8 0x0008
#define RACFG_CMD_BBP_WRITE8 0x0009
#define RACFG_CMD_BBP_READ_ALL 0x000a
#define RACFG_CMD_GET_COUNTER 0x000b
#define RACFG_CMD_CLEAR_COUNTER 0x000c
#define RACFG_CMD_RSV1 0x000d
#define RACFG_CMD_RSV2 0x000e
#define RACFG_CMD_RSV3 0x000f
#define RACFG_CMD_TX_START 0x0010
#define RACFG_CMD_GET_TX_STATUS 0x0011
#define RACFG_CMD_TX_STOP 0x0012
#define RACFG_CMD_RX_START 0x0013
#define RACFG_CMD_RX_STOP 0x0014
#define RACFG_CMD_GET_NOISE_LEVEL 0x0015
#define RACFG_CMD_ATE_START 0x0080
#define RACFG_CMD_ATE_STOP 0x0081
#define RACFG_CMD_ATE_START_TX_CARRIER 0x0100
#define RACFG_CMD_ATE_START_TX_CONT 0x0101
#define RACFG_CMD_ATE_START_TX_FRAME 0x0102
#define RACFG_CMD_ATE_SET_BW 0x0103
#define RACFG_CMD_ATE_SET_TX_POWER0 0x0104
#define RACFG_CMD_ATE_SET_TX_POWER1 0x0105
#define RACFG_CMD_ATE_SET_FREQ_OFFSET 0x0106
#define RACFG_CMD_ATE_GET_STATISTICS 0x0107
#define RACFG_CMD_ATE_RESET_COUNTER 0x0108
#define RACFG_CMD_ATE_SEL_TX_ANTENNA 0x0109
#define RACFG_CMD_ATE_SEL_RX_ANTENNA 0x010a
#define RACFG_CMD_ATE_SET_PREAMBLE 0x010b
#define RACFG_CMD_ATE_SET_CHANNEL 0x010c
#define RACFG_CMD_ATE_SET_ADDR1 0x010d
#define RACFG_CMD_ATE_SET_ADDR2 0x010e
#define RACFG_CMD_ATE_SET_ADDR3 0x010f
#define RACFG_CMD_ATE_SET_RATE 0x0110
#define RACFG_CMD_ATE_SET_TX_FRAME_LEN 0x0111
#define RACFG_CMD_ATE_SET_TX_FRAME_COUNT 0x0112
#define RACFG_CMD_ATE_START_RX_FRAME 0x0113
#define RACFG_CMD_ATE_E2PROM_READ_BULK 0x0114
#define RACFG_CMD_ATE_E2PROM_WRITE_BULK 0x0115
#define RACFG_CMD_ATE_IO_WRITE_BULK 0x0116
#define RACFG_CMD_ATE_BBP_READ_BULK 0x0117
#define RACFG_CMD_ATE_BBP_WRITE_BULK 0x0118
#define RACFG_CMD_ATE_RF_READ_BULK 0x0119
#define RACFG_CMD_ATE_RF_WRITE_BULK 0x011a
#define A2Hex(_X, _p) \
{ \
UCHAR *p; \
_X = 0; \
p = _p; \
while (((*p >= 'a') && (*p <= 'f')) || ((*p >= 'A') && (*p <= 'F')) || ((*p >= '0') && (*p <= '9'))) \
{ \
if ((*p >= 'a') && (*p <= 'f')) \
_X = _X * 16 + *p - 87; \
else if ((*p >= 'A') && (*p <= 'F')) \
_X = _X * 16 + *p - 55; \
else if ((*p >= '0') && (*p <= '9')) \
_X = _X * 16 + *p - 48; \
p++; \
} \
}
static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
#ifdef UCOS
int ate_copy_to_user(
IN PUCHAR payload,
IN PUCHAR msg,
IN INT len)
{
memmove(payload, msg, len);
return 0;
}
#undef copy_to_user
#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
#endif // UCOS //
#define LEN_OF_ARG 16
VOID RtmpDoAte(
IN PRTMP_ADAPTER pAdapter,
IN struct iwreq *wrq)
{
unsigned short Command_Id;
struct ate_racfghdr *pRaCfg;
INT Status = NDIS_STATUS_SUCCESS;
if((pRaCfg = kmalloc(sizeof(struct ate_racfghdr), GFP_KERNEL)) == NULL)
{
Status = -EINVAL;
return;
}
NdisZeroMemory(pRaCfg, sizeof(struct ate_racfghdr));
if (copy_from_user((PUCHAR)pRaCfg, wrq->u.data.pointer, wrq->u.data.length))
{
Status = -EFAULT;
kfree(pRaCfg);
return;
}
Command_Id = ntohs(pRaCfg->command_id);
ATEDBGPRINT(RT_DEBUG_TRACE,("\n%s: Command_Id = 0x%04x !\n", __FUNCTION__, Command_Id));
switch (Command_Id)
{
// We will get this command when QA starts.
case RACFG_CMD_ATE_START:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START\n"));
// prepare feedback as soon as we can to avoid QA timeout.
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_ATE_START\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START is done !\n"));
}
Set_ATE_Proc(pAdapter, "ATESTART");
}
break;
// We will get this command either QA is closed or ated is killed by user.
case RACFG_CMD_ATE_STOP:
{
#ifndef UCOS
INT32 ret;
#endif // !UCOS //
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
// Distinguish this command came from QA(via ated)
// or ate daemon according to the existence of pid in payload.
// No need to prepare feedback if this cmd came directly from ate daemon.
pRaCfg->length = ntohs(pRaCfg->length);
if (pRaCfg->length == sizeof(pAdapter->ate.AtePid))
{
// This command came from QA.
// Get the pid of ATE daemon.
memcpy((UCHAR *)&pAdapter->ate.AtePid,
(&pRaCfg->data[0]) - 2/* == &(pRaCfg->status) */,
sizeof(pAdapter->ate.AtePid));
// prepare feedback as soon as we can to avoid QA timeout.
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_STOP\n"));
Status = -EFAULT;
}
//
// kill ATE daemon when leaving ATE mode.
// We must kill ATE daemon first before setting ATESTOP,
// or Microsoft will report sth. wrong.
#ifndef UCOS
ret = kill_proc(pAdapter->ate.AtePid, SIGTERM, 1);
if (ret)
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
}
#endif // !UCOS //
}
#ifdef UCOS
// Roger add to avoid error message after close QA
if (pAdapter->CSRBaseAddress == RT2860_CSR_ADDR)
{
// prepare feedback as soon as we can to avoid QA timeout.
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_AP_START\n"));
Status = -EFAULT;
}
}
#endif // UCOS //
// AP might have in ATE_STOP mode due to cmd from QA.
if (ATE_ON(pAdapter))
{
// Someone has killed ate daemon while QA GUI is still open.
Set_ATE_Proc(pAdapter, "ATESTOP");
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_AP_START is done !\n"));
}
}
break;
case RACFG_CMD_RF_WRITE_ALL:
{
UINT32 R1, R2, R3, R4;
USHORT channel;
memcpy(&R1, pRaCfg->data-2, 4);
memcpy(&R2, pRaCfg->data+2, 4);
memcpy(&R3, pRaCfg->data+6, 4);
memcpy(&R4, pRaCfg->data+10, 4);
memcpy(&channel, pRaCfg->data+14, 2);
pAdapter->LatchRfRegs.R1 = ntohl(R1);
pAdapter->LatchRfRegs.R2 = ntohl(R2);
pAdapter->LatchRfRegs.R3 = ntohl(R3);
pAdapter->LatchRfRegs.R4 = ntohl(R4);
pAdapter->LatchRfRegs.Channel = ntohs(channel);
RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R1);
RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R2);
RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R3);
RTMP_RF_IO_WRITE32(pAdapter, pAdapter->LatchRfRegs.R4);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RF_WRITE_ALL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RF_WRITE_ALL is done !\n"));
}
}
break;
case RACFG_CMD_E2PROM_READ16:
{
USHORT offset, value, tmp;
offset = ntohs(pRaCfg->status);
/* "tmp" is expecially for some compilers... */
RT28xx_EEPROM_READ16(pAdapter, offset, tmp);
value = tmp;
value = htons(value);
ATEDBGPRINT(RT_DEBUG_TRACE,("EEPROM Read offset = 0x%04x, value = 0x%04x\n", offset, value));
// prepare feedback
pRaCfg->length = htons(4);
pRaCfg->status = htons(0);
memcpy(pRaCfg->data, &value, 2);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("sizeof(struct ate_racfghdr) = %d\n", sizeof(struct ate_racfghdr)));
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ16\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ16 is done !\n"));
}
}
break;
case RACFG_CMD_E2PROM_WRITE16:
{
USHORT offset, value;
offset = ntohs(pRaCfg->status);
memcpy(&value, pRaCfg->data, 2);
value = ntohs(value);
RT28xx_EEPROM_WRITE16(pAdapter, offset, value);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE16\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_WRITE16 is done !\n"));
}
}
break;
case RACFG_CMD_E2PROM_READ_ALL:
{
USHORT buffer[EEPROM_SIZE/2];
rt_ee_read_all(pAdapter,(USHORT *)buffer);
memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer, EEPROM_SIZE);
// prepare feedback
pRaCfg->length = htons(2+EEPROM_SIZE);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_READ_ALL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_E2PROM_READ_ALL is done !\n"));
}
}
break;
case RACFG_CMD_E2PROM_WRITE_ALL:
{
USHORT buffer[EEPROM_SIZE/2];
NdisZeroMemory((UCHAR *)buffer, EEPROM_SIZE);
memcpy_exs(pAdapter, (UCHAR *)buffer, (UCHAR *)&pRaCfg->status, EEPROM_SIZE);
rt_ee_write_all(pAdapter,(USHORT *)buffer);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_E2PROM_WRITE_ALL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_E2PROM_WRITE_ALL is done !\n"));
}
}
break;
case RACFG_CMD_IO_READ:
{
UINT32 offset;
UINT32 value;
memcpy(&offset, &pRaCfg->status, 4);
offset = ntohl(offset);
// We do not need the base address.
// So just extract the offset out.
offset &= 0x0000FFFF;
RTMP_IO_READ32(pAdapter, offset, &value);
value = htonl(value);
// prepare feedback
pRaCfg->length = htons(6);
pRaCfg->status = htons(0);
memcpy(pRaCfg->data, &value, 4);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ is done !\n"));
}
}
break;
case RACFG_CMD_IO_WRITE:
{
UINT32 offset, value;
memcpy(&offset, pRaCfg->data-2, 4);
memcpy(&value, pRaCfg->data+2, 4);
offset = ntohl(offset);
// We do not need the base address.
// So just extract out the offset.
offset &= 0x0000FFFF;
value = ntohl(value);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_IO_WRITE: offset = %x, value = %x\n", offset, value));
RTMP_IO_WRITE32(pAdapter, offset, value);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_WRITE\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_WRITE is done !\n"));
}
}
break;
case RACFG_CMD_IO_READ_BULK:
{
UINT32 offset;
USHORT len;
memcpy(&offset, &pRaCfg->status, 4);
offset = ntohl(offset);
// We do not need the base address.
// So just extract the offset.
offset &= 0x0000FFFF;
memcpy(&len, pRaCfg->data+2, 2);
len = ntohs(len);
if (len > 371)
{
ATEDBGPRINT(RT_DEBUG_TRACE,("len is too large, make it smaller\n"));
pRaCfg->length = htons(2);
pRaCfg->status = htons(1);
break;
}
RTMP_IO_READ_BULK(pAdapter, pRaCfg->data, (UCHAR *)offset, len*4);// unit in four bytes
// prepare feedback
pRaCfg->length = htons(2+len*4);// unit in four bytes
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_IO_READ_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_IO_READ_BULK is done !\n"));
}
}
break;
case RACFG_CMD_BBP_READ8:
{
USHORT offset;
UCHAR value;
value = 0;
offset = ntohs(pRaCfg->status);
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value);
}
else
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, offset, &value);
}
// prepare feedback
pRaCfg->length = htons(3);
pRaCfg->status = htons(0);
pRaCfg->data[0] = value;
ATEDBGPRINT(RT_DEBUG_TRACE,("BBP value = %x\n", value));
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ8\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ8 is done !\n"));
}
}
break;
case RACFG_CMD_BBP_WRITE8:
{
USHORT offset;
UCHAR value;
offset = ntohs(pRaCfg->status);
memcpy(&value, pRaCfg->data, 1);
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value);
}
else
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, offset, value);
}
if ((offset == BBP_R1) || (offset == BBP_R3))
{
SyncTxRxConfig(pAdapter, offset, value);
}
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_WRITE8\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_WRITE8 is done !\n"));
}
}
break;
case RACFG_CMD_BBP_READ_ALL:
{
USHORT j;
for (j = 0; j < 137; j++)
{
pRaCfg->data[j] = 0;
if (ATE_ON(pAdapter))
{
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]);
}
else
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j]);
}
}
// prepare feedback
pRaCfg->length = htons(2+137);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_BBP_READ_ALL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_BBP_READ_ALL is done !\n"));
}
}
break;
case RACFG_CMD_ATE_E2PROM_READ_BULK:
{
USHORT offset;
USHORT len;
USHORT buffer[EEPROM_SIZE/2];
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
rt_ee_read_all(pAdapter,(USHORT *)buffer);
if (offset + len <= EEPROM_SIZE)
memcpy_exs(pAdapter, pRaCfg->data, (UCHAR *)buffer+offset, len);
else
ATEDBGPRINT(RT_DEBUG_ERROR, ("exceed EEPROM size\n"));
// prepare feedback
pRaCfg->length = htons(2+len);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_READ_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_E2PROM_READ_BULK is done !\n"));
}
}
break;
case RACFG_CMD_ATE_E2PROM_WRITE_BULK:
{
USHORT offset;
USHORT len;
USHORT buffer[EEPROM_SIZE/2];
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
rt_ee_read_all(pAdapter,(USHORT *)buffer);
memcpy_exs(pAdapter, (UCHAR *)buffer + offset, (UCHAR *)pRaCfg->data + 2, len);
rt_ee_write_all(pAdapter,(USHORT *)buffer);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_E2PROM_WRITE_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_E2PROM_WRITE_BULK is done !\n"));
}
}
break;
case RACFG_CMD_ATE_IO_WRITE_BULK:
{
UINT32 offset, i, value;
USHORT len;
memcpy(&offset, &pRaCfg->status, 4);
offset = ntohl(offset);
memcpy(&len, pRaCfg->data+2, 2);
len = ntohs(len);
for (i = 0; i < len; i += 4)
{
memcpy_exl(pAdapter, (UCHAR *)&value, pRaCfg->data+4+i, 4);
printk("Write %x %x\n", offset + i, value);
RTMP_IO_WRITE32(pAdapter, (offset +i) & 0xffff, value);
}
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_IO_WRITE_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("RACFG_CMD_ATE_IO_WRITE_BULK is done !\n"));
}
}
break;
case RACFG_CMD_ATE_BBP_READ_BULK:
{
USHORT offset;
USHORT len;
USHORT j;
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
for (j = offset; j < (offset+len); j++)
{
pRaCfg->data[j - offset] = 0;
if (pAdapter->ate.Mode == ATE_STOP)
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]);
}
else
{
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, j, &pRaCfg->data[j - offset]);
}
}
// prepare feedback
pRaCfg->length = htons(2+len);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_READ_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_READ_BULK is done !\n"));
}
}
break;
case RACFG_CMD_ATE_BBP_WRITE_BULK:
{
USHORT offset;
USHORT len;
USHORT j;
UCHAR *value;
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
for (j = offset; j < (offset+len); j++)
{
value = pRaCfg->data + 2 + (j - offset);
if (pAdapter->ate.Mode == ATE_STOP)
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value);
}
else
{
ATE_BBP_IO_WRITE8_BY_REG_ID(pAdapter, j, *value);
}
}
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_BBP_WRITE_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_BBP_WRITE_BULK is done !\n"));
}
}
break;
#ifdef CONFIG_RALINK_RT3052
case RACFG_CMD_ATE_RF_READ_BULK:
{
USHORT offset;
USHORT len;
USHORT j;
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
for (j = offset; j < (offset+len); j++)
{
pRaCfg->data[j - offset] = 0;
RT30xxReadRFRegister(pAdapter, j, &pRaCfg->data[j - offset]);
}
// prepare feedback
pRaCfg->length = htons(2+len);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_READ_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_READ_BULK is done !\n"));
}
}
break;
case RACFG_CMD_ATE_RF_WRITE_BULK:
{
USHORT offset;
USHORT len;
USHORT j;
UCHAR *value;
offset = ntohs(pRaCfg->status);
memcpy(&len, pRaCfg->data, 2);
len = ntohs(len);
for (j = offset; j < (offset+len); j++)
{
value = pRaCfg->data + 2 + (j - offset);
RT30xxWriteRFRegister(pAdapter, j, *value);
}
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RF_WRITE_BULK\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RF_WRITE_BULK is done !\n"));
}
}
break;
#endif
case RACFG_CMD_GET_NOISE_LEVEL:
{
UCHAR channel;
INT32 buffer[3][10];/* 3 : RxPath ; 10 : no. of per rssi samples */
channel = (ntohs(pRaCfg->status) & 0x00FF);
CalNoiseLevel(pAdapter, channel, buffer);
memcpy_exl(pAdapter, (UCHAR *)pRaCfg->data, (UCHAR *)&(buffer[0][0]), (sizeof(INT32)*3*10));
// prepare feedback
pRaCfg->length = htons(2 + (sizeof(INT32)*3*10));
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_NOISE_LEVEL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_NOISE_LEVEL is done !\n"));
}
}
break;
case RACFG_CMD_GET_COUNTER:
{
memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.U2M, 4);
memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->ate.OtherData, 4);
memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->ate.Beacon, 4);
memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->ate.OtherCount, 4);
memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->ate.TxAc0, 4);
memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->ate.TxAc1, 4);
memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->ate.TxAc2, 4);
memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->ate.TxAc3, 4);
memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->ate.TxHCCA, 4);
memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->ate.TxMgmt, 4);
memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&pAdapter->ate.RSSI0, 4);
memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&pAdapter->ate.RSSI1, 4);
memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&pAdapter->ate.RSSI2, 4);
memcpy_exl(pAdapter, &pRaCfg->data[52], (UCHAR *)&pAdapter->ate.SNR0, 4);
memcpy_exl(pAdapter, &pRaCfg->data[56], (UCHAR *)&pAdapter->ate.SNR1, 4);
pRaCfg->length = htons(2+60);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_COUNTER\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_COUNTER is done !\n"));
}
}
break;
case RACFG_CMD_CLEAR_COUNTER:
{
pAdapter->ate.U2M = 0;
pAdapter->ate.OtherData = 0;
pAdapter->ate.Beacon = 0;
pAdapter->ate.OtherCount = 0;
pAdapter->ate.TxAc0 = 0;
pAdapter->ate.TxAc1 = 0;
pAdapter->ate.TxAc2 = 0;
pAdapter->ate.TxAc3 = 0;
pAdapter->ate.TxHCCA = 0;
pAdapter->ate.TxMgmt = 0;
pAdapter->ate.TxDoneCount = 0;
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_CLEAR_COUNTER\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_CLEAR_COUNTER is done !\n"));
}
}
break;
case RACFG_CMD_TX_START:
{
USHORT *p;
USHORT err = 1;
UCHAR Bbp22Value = 0, Bbp24Value = 0;
if ((pAdapter->ate.TxStatus != 0) && (pAdapter->ate.Mode & ATE_TXFRAME))
{
ATEDBGPRINT(RT_DEBUG_TRACE,("Ate Tx is already running, to run next Tx, you must stop it first\n"));
err = 2;
goto TX_START_ERROR;
}
else if ((pAdapter->ate.TxStatus != 0) && !(pAdapter->ate.Mode & ATE_TXFRAME))
{
int i = 0;
while ((i++ < 10) && (pAdapter->ate.TxStatus != 0))
{
RTMPusecDelay(5000);
}
// force it to stop
pAdapter->ate.TxStatus = 0;
pAdapter->ate.TxDoneCount = 0;
//pAdapter->ate.Repeat = 0;
pAdapter->ate.bQATxStart = FALSE;
}
// If pRaCfg->length == 0, this "RACFG_CMD_TX_START" is for Carrier test or Carrier Suppression.
if (ntohs(pRaCfg->length) != 0)
{
// Get frame info
#ifdef RT2870
NdisMoveMemory(&pAdapter->ate.TxInfo, pRaCfg->data - 2, 4);
#ifdef RT_BIG_ENDIAN
RTMPDescriptorEndianChange((PUCHAR) &pAdapter->ate.TxInfo, TYPE_TXINFO);
#endif // RT_BIG_ENDIAN //
#endif // RT2870 //
NdisMoveMemory(&pAdapter->ate.TxWI, pRaCfg->data + 2, 16);
#ifdef RT_BIG_ENDIAN
RTMPWIEndianChange((PUCHAR)&pAdapter->ate.TxWI, TYPE_TXWI);
#endif // RT_BIG_ENDIAN //
NdisMoveMemory(&pAdapter->ate.TxCount, pRaCfg->data + 18, 4);
pAdapter->ate.TxCount = ntohl(pAdapter->ate.TxCount);
p = (USHORT *)(&pRaCfg->data[22]);
//p = pRaCfg->data + 22;
// always use QID_AC_BE
pAdapter->ate.QID = 0;
p = (USHORT *)(&pRaCfg->data[24]);
//p = pRaCfg->data + 24;
pAdapter->ate.HLen = ntohs(*p);
if (pAdapter->ate.HLen > 32)
{
ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.HLen > 32\n"));
err = 3;
goto TX_START_ERROR;
}
NdisMoveMemory(&pAdapter->ate.Header, pRaCfg->data + 26, pAdapter->ate.HLen);
pAdapter->ate.PLen = ntohs(pRaCfg->length) - (pAdapter->ate.HLen + 28);
if (pAdapter->ate.PLen > 32)
{
ATEDBGPRINT(RT_DEBUG_ERROR,("pAdapter->ate.PLen > 32\n"));
err = 4;
goto TX_START_ERROR;
}
NdisMoveMemory(&pAdapter->ate.Pattern, pRaCfg->data + 26 + pAdapter->ate.HLen, pAdapter->ate.PLen);
pAdapter->ate.DLen = pAdapter->ate.TxWI.MPDUtotalByteCount - pAdapter->ate.HLen;
}
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R22, &Bbp22Value);
switch (Bbp22Value)
{
case BBP22_TXFRAME:
{
if (pAdapter->ate.TxCount == 0)
{
}
ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
pAdapter->ate.bQATxStart = TRUE;
Set_ATE_Proc(pAdapter, "TXFRAME");
}
break;
case BBP22_TXCONT_OR_CARRSUPP:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("BBP22_TXCONT_OR_CARRSUPP\n"));
ATE_BBP_IO_READ8_BY_REG_ID(pAdapter, 24, &Bbp24Value);
switch (Bbp24Value)
{
case BBP24_TXCONT:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCONT\n"));
pAdapter->ate.bQATxStart = TRUE;
Set_ATE_Proc(pAdapter, "TXCONT");
}
break;
case BBP24_CARRSUPP:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARRSUPP\n"));
pAdapter->ate.bQATxStart = TRUE;
pAdapter->ate.Mode |= ATE_TXCARRSUPP;
}
break;
default:
{
ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
}
break;
}
}
break;
case BBP22_TXCARR:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("START TXCARR\n"));
pAdapter->ate.bQATxStart = TRUE;
Set_ATE_Proc(pAdapter, "TXCARR");
}
break;
default:
{
ATEDBGPRINT(RT_DEBUG_ERROR,("Unknown Start TX subtype !"));
}
break;
}
if (pAdapter->ate.bQATxStart == TRUE)
{
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() was failed in case RACFG_CMD_TX_START\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_START is done !\n"));
}
break;
}
TX_START_ERROR:
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(err);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_TX_START\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("feedback of TX_START_ERROR is done !\n"));
}
}
break;
case RACFG_CMD_GET_TX_STATUS:
{
UINT32 count;
// prepare feedback
pRaCfg->length = htons(6);
pRaCfg->status = htons(0);
count = htonl(pAdapter->ate.TxDoneCount);
NdisMoveMemory(pRaCfg->data, &count, 4);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_GET_TX_STATUS\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_GET_TX_STATUS is done !\n"));
}
}
break;
case RACFG_CMD_TX_STOP:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_TX_STOP\n"));
Set_ATE_Proc(pAdapter, "TXSTOP");
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_TX_STOP\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_TX_STOP is done !\n"));
}
}
break;
case RACFG_CMD_RX_START:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
pAdapter->ate.bQARxStart = TRUE;
Set_ATE_Proc(pAdapter, "RXFRAME");
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
}
}
break;
case RACFG_CMD_RX_STOP:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_STOP\n"));
Set_ATE_Proc(pAdapter, "RXSTOP");
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_STOP\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_STOP is done !\n"));
}
}
break;
/* The following cases are for new ATE GUI(not QA). */
/*==================================================*/
case RACFG_CMD_ATE_START_TX_CARRIER:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CARRIER\n"));
Set_ATE_Proc(pAdapter, "TXCARR");
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CARRIER\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CARRIER is done !\n"));
}
}
break;
case RACFG_CMD_ATE_START_TX_CONT:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_CONT\n"));
Set_ATE_Proc(pAdapter, "TXCONT");
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_CONT\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_CONT is done !\n"));
}
}
break;
case RACFG_CMD_ATE_START_TX_FRAME:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_START_TX_FRAME\n"));
Set_ATE_Proc(pAdapter, "TXFRAME");
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_START_TX_FRAME\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_START_TX_FRAME is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_BW:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_BW\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_BW_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_BW\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_BW is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_TX_POWER0:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER0\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_POWER0_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER0\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER0 is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_TX_POWER1:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_POWER1\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_POWER1_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_POWER1\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_POWER1 is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_FREQ_OFFSET:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_FREQOFFSET_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_FREQ_OFFSET\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_FREQ_OFFSET is done !\n"));
}
}
break;
case RACFG_CMD_ATE_GET_STATISTICS:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_GET_STATISTICS\n"));
memcpy_exl(pAdapter, &pRaCfg->data[0], (UCHAR *)&pAdapter->ate.TxDoneCount, 4);
memcpy_exl(pAdapter, &pRaCfg->data[4], (UCHAR *)&pAdapter->WlanCounters.RetryCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[8], (UCHAR *)&pAdapter->WlanCounters.FailedCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[12], (UCHAR *)&pAdapter->WlanCounters.RTSSuccessCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[16], (UCHAR *)&pAdapter->WlanCounters.RTSFailureCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[20], (UCHAR *)&pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[24], (UCHAR *)&pAdapter->WlanCounters.FCSErrorCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[28], (UCHAR *)&pAdapter->Counters8023.RxNoBuffer, 4);
memcpy_exl(pAdapter, &pRaCfg->data[32], (UCHAR *)&pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart, 4);
memcpy_exl(pAdapter, &pRaCfg->data[36], (UCHAR *)&pAdapter->RalinkCounters.OneSecFalseCCACnt, 4);
if (pAdapter->ate.RxAntennaSel == 0)
{
INT32 RSSI0 = 0;
INT32 RSSI1 = 0;
INT32 RSSI2 = 0;
RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
RSSI1 = (INT32)(pAdapter->ate.LastRssi1 - pAdapter->BbpRssiToDbmDelta);
RSSI2 = (INT32)(pAdapter->ate.LastRssi2 - pAdapter->BbpRssiToDbmDelta);
memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
memcpy_exl(pAdapter, &pRaCfg->data[44], (UCHAR *)&RSSI1, 4);
memcpy_exl(pAdapter, &pRaCfg->data[48], (UCHAR *)&RSSI2, 4);
pRaCfg->length = htons(2+52);
}
else
{
INT32 RSSI0 = 0;
RSSI0 = (INT32)(pAdapter->ate.LastRssi0 - pAdapter->BbpRssiToDbmDelta);
memcpy_exl(pAdapter, &pRaCfg->data[40], (UCHAR *)&RSSI0, 4);
pRaCfg->length = htons(2+44);
}
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_GET_STATISTICS\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_GET_STATISTICS is done !\n"));
}
}
break;
case RACFG_CMD_ATE_RESET_COUNTER:
{
SHORT value = 1;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_RESET_COUNTER\n"));
sprintf((PCHAR)str, "%d", value);
Set_ResetStatCounter_Proc(pAdapter, str);
pAdapter->ate.TxDoneCount = 0;
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_RESET_COUNTER\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_RESET_COUNTER is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SEL_TX_ANTENNA:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_Antenna_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_TX_ANTENNA\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_TX_ANTENNA is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SEL_RX_ANTENNA:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_RX_Antenna_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SEL_RX_ANTENNA\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SEL_RX_ANTENNA is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_PREAMBLE:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_PREAMBLE\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_MODE_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_PREAMBLE\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_PREAMBLE is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_CHANNEL:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_CHANNEL\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_CHANNEL_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_CHANNEL\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_CHANNEL is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_ADDR1:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR1\n"));
// Addr is an array of UCHAR,
// so no need to perform endian swap.
memcpy(pAdapter->ate.Addr1, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR1\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR1 is done !\n (ADDR1 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr1[0],
pAdapter->ate.Addr1[1], pAdapter->ate.Addr1[2], pAdapter->ate.Addr1[3], pAdapter->ate.Addr1[4], pAdapter->ate.Addr1[5]));
}
}
break;
case RACFG_CMD_ATE_SET_ADDR2:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR2\n"));
// Addr is an array of UCHAR,
// so no need to perform endian swap.
memcpy(pAdapter->ate.Addr2, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR2\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR2 is done !\n (ADDR2 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr2[0],
pAdapter->ate.Addr2[1], pAdapter->ate.Addr2[2], pAdapter->ate.Addr2[3], pAdapter->ate.Addr2[4], pAdapter->ate.Addr2[5]));
}
}
break;
case RACFG_CMD_ATE_SET_ADDR3:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_ADDR3\n"));
// Addr is an array of UCHAR,
// so no need to perform endian swap.
memcpy(pAdapter->ate.Addr3, (PUCHAR)(pRaCfg->data - 2), MAC_ADDR_LEN);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_ADDR3\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_ADDR3 is done !\n (ADDR3 = %2X:%2X:%2X:%2X:%2X:%2X)\n", pAdapter->ate.Addr3[0],
pAdapter->ate.Addr3[1], pAdapter->ate.Addr3[2], pAdapter->ate.Addr3[3], pAdapter->ate.Addr3[4], pAdapter->ate.Addr3[5]));
}
}
break;
case RACFG_CMD_ATE_SET_RATE:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_RATE\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_MCS_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_RATE\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_RATE is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_TX_FRAME_LEN:
{
SHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_LENGTH_Proc(pAdapter, str);
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_LEN\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_LEN is done !\n"));
}
}
break;
case RACFG_CMD_ATE_SET_TX_FRAME_COUNT:
{
USHORT value = 0;
UCHAR str[LEN_OF_ARG];
NdisZeroMemory(str, LEN_OF_ARG);
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
{
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_COUNT_Proc(pAdapter, str);
}
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_ATE_SET_TX_FRAME_COUNT\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_ATE_SET_TX_FRAME_COUNT is done !\n"));
}
}
break;
case RACFG_CMD_ATE_START_RX_FRAME:
{
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_RX_START\n"));
Set_ATE_Proc(pAdapter, "RXFRAME");
// prepare feedback
pRaCfg->length = htons(2);
pRaCfg->status = htons(0);
wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
+ sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
+ sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("copy_to_user() fail in case RACFG_CMD_RX_START\n"));
Status = -EFAULT;
}
else
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("RACFG_CMD_RX_START is done !\n"));
}
}
break;
default:
break;
}
ASSERT(pRaCfg != NULL);
if (pRaCfg != NULL)
{
kfree(pRaCfg);
}
return;
}
VOID BubbleSort(INT32 n, INT32 a[])
{
INT32 k, j, temp;
for (k = n-1; k>0; k--)
{
for (j = 0; j<k; j++)
{
if(a[j] > a[j+1])
{
temp = a[j];
a[j]=a[j+1];
a[j+1]=temp;
}
}
}
}
VOID CalNoiseLevel(PRTMP_ADAPTER pAd, UCHAR channel, INT32 RSSI[3][10])
{
INT32 RSSI0, RSSI1, RSSI2;
CHAR Rssi0Offset, Rssi1Offset, Rssi2Offset;
UCHAR BbpR50Rssi0 = 0, BbpR51Rssi1 = 0, BbpR52Rssi2 = 0;
UCHAR Org_BBP66value = 0, Org_BBP69value = 0, Org_BBP70value = 0, data = 0;
USHORT LNA_Gain = 0;
INT32 j = 0;
UCHAR Org_Channel = pAd->ate.Channel;
USHORT GainValue = 0, OffsetValue = 0;
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &Org_BBP66value);
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R69, &Org_BBP69value);
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R70, &Org_BBP70value);
//**********************************************************************
// Read the value of LNA gain and Rssi offset
//**********************************************************************
RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, GainValue);
// for Noise Level
if (channel <= 14)
{
LNA_Gain = GainValue & 0x00FF;
RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, OffsetValue);
Rssi0Offset = OffsetValue & 0x00FF;
Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_BG_OFFSET + 2)/* 0x48 */, OffsetValue);
Rssi2Offset = OffsetValue & 0x00FF;
}
else
{
LNA_Gain = (GainValue & 0xFF00) >> 8;
RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, OffsetValue);
Rssi0Offset = OffsetValue & 0x00FF;
Rssi1Offset = (OffsetValue & 0xFF00) >> 8;
RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET + 2)/* 0x4C */, OffsetValue);
Rssi2Offset = OffsetValue & 0x00FF;
}
//**********************************************************************
{
pAd->ate.Channel = channel;
ATEAsicSwitchChannel(pAd);
mdelay(5);
data = 0x10;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, data);
data = 0x40;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, data);
data = 0x40;
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, data);
mdelay(5);
// Start Rx
pAd->ate.bQARxStart = TRUE;
Set_ATE_Proc(pAd, "RXFRAME");
mdelay(5);
for (j = 0; j < 10; j++)
{
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R50, &BbpR50Rssi0);
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R51, &BbpR51Rssi1);
ATE_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R52, &BbpR52Rssi2);
mdelay(10);
// Calculate RSSI 0
if (BbpR50Rssi0 == 0)
{
RSSI0 = -100;
}
else
{
RSSI0 = (INT32)(-12 - BbpR50Rssi0 - LNA_Gain - Rssi0Offset);
}
RSSI[0][j] = RSSI0;
if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
{
// Calculate RSSI 1
if (BbpR51Rssi1 == 0)
{
RSSI1 = -100;
}
else
{
RSSI1 = (INT32)(-12 - BbpR51Rssi1 - LNA_Gain - Rssi1Offset);
}
RSSI[1][j] = RSSI1;
}
if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
{
// Calculate RSSI 2
if (BbpR52Rssi2 == 0)
RSSI2 = -100;
else
RSSI2 = (INT32)(-12 - BbpR52Rssi2 - LNA_Gain - Rssi2Offset);
RSSI[2][j] = RSSI2;
}
}
// Stop Rx
Set_ATE_Proc(pAd, "RXSTOP");
mdelay(5);
BubbleSort(10, RSSI[0]); // 1R
if ( pAd->Antenna.field.RxPath >= 2 ) // 2R
{
BubbleSort(10, RSSI[1]);
}
if ( pAd->Antenna.field.RxPath >= 3 ) // 3R
{
BubbleSort(10, RSSI[2]);
}
}
pAd->ate.Channel = Org_Channel;
ATEAsicSwitchChannel(pAd);
// Restore original value
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, Org_BBP66value);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, Org_BBP69value);
ATE_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, Org_BBP70value);
return;
}
BOOLEAN SyncTxRxConfig(PRTMP_ADAPTER pAd, USHORT offset, UCHAR value)
{
UCHAR tmp = 0, bbp_data = 0;
if (ATE_ON(pAd))
{
ATE_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
}
else
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, offset, &bbp_data);
}
/* confirm again */
ASSERT(bbp_data == value);
switch(offset)
{
case BBP_R1:
/* Need to sync. tx configuration with legacy ATE. */
tmp = (bbp_data & ((1 << 4) | (1 << 3))/* 0x18 */) >> 3;
switch(tmp)
{
/* The BBP R1 bit[4:3] = 2 :: Both DACs will be used by QA. */
case 2:
/* All */
pAd->ate.TxAntennaSel = 0;
break;
/* The BBP R1 bit[4:3] = 0 :: DAC 0 will be used by QA. */
case 0:
/* Antenna one */
pAd->ate.TxAntennaSel = 1;
break;
/* The BBP R1 bit[4:3] = 1 :: DAC 1 will be used by QA. */
case 1:
/* Antenna two */
pAd->ate.TxAntennaSel = 2;
break;
default:
DBGPRINT(RT_DEBUG_TRACE, ("%s -- Sth. wrong! : return FALSE; \n", __FUNCTION__));
return FALSE;
}
break;/* case BBP_R1 */
case BBP_R3:
/* Need to sync. rx configuration with legacy ATE. */
tmp = (bbp_data & ((1 << 1) | (1 << 0))/* 0x03 */);
switch(tmp)
{
/* The BBP R3 bit[1:0] = 3 :: All ADCs will be used by QA. */
case 3:
/* All */
pAd->ate.RxAntennaSel = 0;
break;
/* The BBP R3 bit[1:0] = 0 :: ADC 0 will be used by QA, */
/* unless the BBP R3 bit[4:3] = 2 */
case 0:
/* Antenna one */
pAd->ate.RxAntennaSel = 1;
tmp = ((bbp_data & ((1 << 4) | (1 << 3))/* 0x03 */) >> 3);
if (tmp == 2)// 3R
{
/* Default : All ADCs will be used by QA */
pAd->ate.RxAntennaSel = 0;
}
break;
/* The BBP R3 bit[1:0] = 1 :: ADC 1 will be used by QA. */
case 1:
/* Antenna two */
pAd->ate.RxAntennaSel = 2;
break;
/* The BBP R3 bit[1:0] = 2 :: ADC 2 will be used by QA. */
case 2:
/* Antenna three */
pAd->ate.RxAntennaSel = 3;
break;
default:
DBGPRINT(RT_DEBUG_ERROR, ("%s -- Impossible! : return FALSE; \n", __FUNCTION__));
return FALSE;
}
break;/* case BBP_R3 */
default:
DBGPRINT(RT_DEBUG_ERROR, ("%s -- Sth. wrong! : return FALSE; \n", __FUNCTION__));
return FALSE;
}
return TRUE;
}
static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
{
ULONG i, Value = 0;
ULONG *pDst, *pSrc;
UCHAR *p8;
p8 = src;
pDst = (ULONG *) dst;
pSrc = (ULONG *) src;
for (i = 0 ; i < (len/4); i++)
{
/* For alignment issue, we need a variable "Value". */
memmove(&Value, pSrc, 4);
Value = htonl(Value);
memmove(pDst, &Value, 4);
pDst++;
pSrc++;
}
if ((len % 4) != 0)
{
/* wish that it will never reach here */
memmove(&Value, pSrc, (len % 4));
Value = htonl(Value);
memmove(pDst, &Value, (len % 4));
}
}
static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len)
{
ULONG i;
UCHAR *pDst, *pSrc;
pDst = dst;
pSrc = src;
for (i = 0; i < (len/2); i++)
{
memmove(pDst, pSrc, 2);
*((USHORT *)pDst) = htons(*((USHORT *)pDst));
pDst+=2;
pSrc+=2;
}
if ((len % 2) != 0)
{
memmove(pDst, pSrc, 1);
}
}
static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len)
{
UINT32 i, Value;
UINT32 *pDst, *pSrc;
pDst = (UINT32 *) dst;
pSrc = (UINT32 *) src;
for (i = 0 ; i < (len/4); i++)
{
RTMP_IO_READ32(pAd, (ULONG)pSrc, &Value);
Value = htonl(Value);
memmove(pDst, &Value, 4);
pDst++;
pSrc++;
}
return;
}
INT Set_TxStop_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
ATEDBGPRINT(RT_DEBUG_TRACE,("Set_TxStop_Proc\n"));
if (Set_ATE_Proc(pAd, "TXSTOP"))
{
return TRUE;
}
else
{
return FALSE;
}
}
INT Set_RxStop_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
ATEDBGPRINT(RT_DEBUG_TRACE,("Set_RxStop_Proc\n"));
if (Set_ATE_Proc(pAd, "RXSTOP"))
{
return TRUE;
}
else
{
return FALSE;
}
}
#endif // RALINK_28xx_QA //
#endif // RALINK_ATE //