blob: dd13e3a4c272965bf23cde32b3409bd28dda6f62 [file] [log] [blame]
#
# Multimedia device configuration
#
menuconfig MEDIA_SUPPORT
tristate "Multimedia support"
depends on HAS_IOMEM
help
If you want to use Webcams, Video grabber devices and/or TV devices
enable this option and other options below.
Additional info and docs are available on the web at
<http://linuxtv.org>
if MEDIA_SUPPORT
comment "Multimedia core support"
#
# Multimedia support - automatically enable V4L2 and DVB core
#
config MEDIA_CAMERA_SUPPORT
bool "Cameras/video grabbers support"
---help---
Enable support for webcams and video grabbers.
Say Y when you have a webcam or a video capture grabber board.
config MEDIA_ANALOG_TV_SUPPORT
bool "Analog TV support"
---help---
Enable analog TV support.
Say Y when you have a TV board with analog support or with a
hybrid analog/digital TV chipset.
Note: There are several DVB cards that are based on chips that
support both analog and digital TV. Disabling this option
will disable support for them.
config MEDIA_DIGITAL_TV_SUPPORT
bool "Digital TV support"
---help---
Enable digital TV support.
Say Y when you have a board with digital support or a board with
hybrid digital TV and analog TV.
config MEDIA_RADIO_SUPPORT
bool "AM/FM radio receivers/transmitters support"
---help---
Enable AM/FM radio support.
Additional info and docs are available on the web at
<http://linuxtv.org>
Say Y when you have a board with radio support.
Note: There are several TV cards that are based on chips that
support radio reception. Disabling this option will
disable support for them.
config MEDIA_RC_SUPPORT
bool "Remote Controller support"
depends on INPUT
---help---
Enable support for Remote Controllers on Linux. This is
needed in order to support several video capture adapters,
standalone IR receivers/transmitters, and RF receivers.
Enable this option if you have a video capture board even
if you don't need IR, as otherwise, you may not be able to
compile the driver for your adapter.
Say Y when you have a TV or an IR device.
#
# Media controller
# Selectable only for webcam/grabbers, as other drivers don't use it
#
config MEDIA_CONTROLLER
bool "Media Controller API (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on MEDIA_CAMERA_SUPPORT
---help---
Enable the media controller API used to query media devices internal
topology and configure it dynamically.
This API is mostly used by camera interfaces in embedded platforms.
#
# Video4Linux support
# Only enables if one of the V4L2 types (ATV, webcam, radio) is selected
#
config VIDEO_DEV
tristate
depends on MEDIA_SUPPORT
depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT
default y
config VIDEO_V4L2_SUBDEV_API
bool "V4L2 sub-device userspace API (EXPERIMENTAL)"
depends on VIDEO_DEV && MEDIA_CONTROLLER && EXPERIMENTAL
---help---
Enables the V4L2 sub-device pad-level userspace API used to configure
video format, size and frame rate between hardware blocks.
This API is mostly used by camera interfaces in embedded platforms.
source "drivers/media/v4l2-core/Kconfig"
#
# DVB Core
# Only enables if one of DTV is selected
#
config DVB_CORE
tristate
depends on MEDIA_SUPPORT
depends on MEDIA_DIGITAL_TV_SUPPORT
default y
select CRC32
config DVB_NET
bool "DVB Network Support"
default (NET && INET)
depends on NET && INET && DVB_CORE
help
This option enables DVB Network Support which is a part of the DVB
standard. It is used, for example, by automatic firmware updates used
on Set-Top-Boxes. It can also be used to access the Internet via the
DVB card, if the network provider supports it.
You may want to disable the network support on embedded devices. If
unsure say Y.
source "drivers/media/dvb-core/Kconfig"
comment "Media drivers"
source "drivers/media/rc/Kconfig"
#
# V4L platform/mem2mem drivers
#
source "drivers/media/usb/Kconfig"
source "drivers/media/pci/Kconfig"
source "drivers/media/platform/Kconfig"
source "drivers/media/mmc/Kconfig"
source "drivers/media/parport/Kconfig"
source "drivers/media/radio/Kconfig"
comment "Supported FireWire (IEEE 1394) Adapters"
depends on DVB_CORE && FIREWIRE
source "drivers/media/firewire/Kconfig"
# Common driver options
source "drivers/media/common/Kconfig"
#
# Ancillary drivers (tuners, i2c, frontends)
#
config MEDIA_SUBDRV_AUTOSELECT
bool "Autoselect analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
default y
help
By default, a TV driver auto-selects all possible tuners
thar could be used by the driver.
This is generally the right thing to do, except when there
are strict constraints with regards to the kernel size.
Use this option with care, as deselecting tuner drivers which
are in fact necessary will result in TV devices which cannot
be tuned due to lack of the tuning driver.
If unsure say Y.
comment "Media ancillary drivers (tuners, sensors, i2c, frontends)"
source "drivers/media/i2c/Kconfig"
source "drivers/media/tuners/Kconfig"
source "drivers/media/dvb-frontends/Kconfig"
endif # MEDIA_SUPPORT