blob: fec9c30133d43b2731a9fe8d765ba05106d5eda1 [file] [log] [blame]
/*
* Generic GPIO driver for logic cells found in the Nomadik SoC
*
* Copyright (C) 2008,2009 STMicroelectronics
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
* Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
/* Since we request GPIOs from ourself */
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <asm/mach/irq.h>
#include <plat/pincfg.h>
#include <plat/gpio-nomadik.h>
#include "pinctrl-nomadik.h"
/*
* The GPIO module in the Nomadik family of Systems-on-Chip is an
* AMBA device, managing 32 pins and alternate functions. The logic block
* is currently used in the Nomadik and ux500.
*
* Symbols in this file are called "nmk_gpio" for "nomadik gpio"
*/
#define NMK_GPIO_PER_CHIP 32
struct nmk_gpio_chip {
struct gpio_chip chip;
struct irq_domain *domain;
void __iomem *addr;
struct clk *clk;
unsigned int bank;
unsigned int parent_irq;
int secondary_parent_irq;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
spinlock_t lock;
bool sleepmode;
/* Keep track of configured edges */
u32 edge_rising;
u32 edge_falling;
u32 real_wake;
u32 rwimsc;
u32 fwimsc;
u32 rimsc;
u32 fimsc;
u32 pull_up;
u32 lowemi;
};
struct nmk_pinctrl {
struct device *dev;
struct pinctrl_dev *pctl;
const struct nmk_pinctrl_soc_data *soc;
};
static struct nmk_gpio_chip *
nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)];
static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips)
static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int gpio_mode)
{
u32 bit = 1 << offset;
u32 afunc, bfunc;
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
if (gpio_mode & NMK_GPIO_ALT_A)
afunc |= bit;
if (gpio_mode & NMK_GPIO_ALT_B)
bfunc |= bit;
writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
}
static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
unsigned offset, enum nmk_gpio_slpm mode)
{
u32 bit = 1 << offset;
u32 slpm;
slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
if (mode == NMK_GPIO_SLPM_NOCHANGE)
slpm |= bit;
else
slpm &= ~bit;
writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
}
static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
unsigned offset, enum nmk_gpio_pull pull)
{
u32 bit = 1 << offset;
u32 pdis;
pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
if (pull == NMK_GPIO_PULL_NONE) {
pdis |= bit;
nmk_chip->pull_up &= ~bit;
} else {
pdis &= ~bit;
}
writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
if (pull == NMK_GPIO_PULL_UP) {
nmk_chip->pull_up |= bit;
writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
} else if (pull == NMK_GPIO_PULL_DOWN) {
nmk_chip->pull_up &= ~bit;
writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
}
}
static void __nmk_gpio_set_lowemi(struct nmk_gpio_chip *nmk_chip,
unsigned offset, bool lowemi)
{
u32 bit = BIT(offset);
bool enabled = nmk_chip->lowemi & bit;
if (lowemi == enabled)
return;
if (lowemi)
nmk_chip->lowemi |= bit;
else
nmk_chip->lowemi &= ~bit;
writel_relaxed(nmk_chip->lowemi,
nmk_chip->addr + NMK_GPIO_LOWEMI);
}
static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
unsigned offset)
{
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
}
static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int val)
{
if (val)
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
else
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
}
static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int val)
{
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
__nmk_gpio_set_output(nmk_chip, offset, val);
}
static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip,
unsigned offset, int gpio_mode,
bool glitch)
{
u32 rwimsc = nmk_chip->rwimsc;
u32 fwimsc = nmk_chip->fwimsc;
if (glitch && nmk_chip->set_ioforce) {
u32 bit = BIT(offset);
/* Prevent spurious wakeups */
writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC);
writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC);
nmk_chip->set_ioforce(true);
}
__nmk_gpio_set_mode(nmk_chip, offset, gpio_mode);
if (glitch && nmk_chip->set_ioforce) {
nmk_chip->set_ioforce(false);
writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC);
writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC);
}
}
static void
nmk_gpio_disable_lazy_irq(struct nmk_gpio_chip *nmk_chip, unsigned offset)
{
u32 falling = nmk_chip->fimsc & BIT(offset);
u32 rising = nmk_chip->rimsc & BIT(offset);
int gpio = nmk_chip->chip.base + offset;
int irq = NOMADIK_GPIO_TO_IRQ(gpio);
struct irq_data *d = irq_get_irq_data(irq);
if (!rising && !falling)
return;
if (!d || !irqd_irq_disabled(d))
return;
if (rising) {
nmk_chip->rimsc &= ~BIT(offset);
writel_relaxed(nmk_chip->rimsc,
nmk_chip->addr + NMK_GPIO_RIMSC);
}
if (falling) {
nmk_chip->fimsc &= ~BIT(offset);
writel_relaxed(nmk_chip->fimsc,
nmk_chip->addr + NMK_GPIO_FIMSC);
}
dev_dbg(nmk_chip->chip.dev, "%d: clearing interrupt mask\n", gpio);
}
static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
unsigned offset, unsigned alt_num)
{
int i;
u16 reg;
u8 bit;
u8 alt_index;
const struct prcm_gpiocr_altcx_pin_desc *pin_desc;
const u16 *gpiocr_regs;
if (alt_num > PRCM_IDX_GPIOCR_ALTC_MAX) {
dev_err(npct->dev, "PRCM GPIOCR: alternate-C%i is invalid\n",
alt_num);
return;
}
for (i = 0 ; i < npct->soc->npins_altcx ; i++) {
if (npct->soc->altcx_pins[i].pin == offset)
break;
}
if (i == npct->soc->npins_altcx) {
dev_dbg(npct->dev, "PRCM GPIOCR: pin %i is not found\n",
offset);
return;
}
pin_desc = npct->soc->altcx_pins + i;
gpiocr_regs = npct->soc->prcm_gpiocr_registers;
/*
* If alt_num is NULL, just clear current ALTCx selection
* to make sure we come back to a pure ALTC selection
*/
if (!alt_num) {
for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) {
if (pin_desc->altcx[i].used == true) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
if (prcmu_read(reg) & BIT(bit)) {
prcmu_write_masked(reg, BIT(bit), 0);
dev_dbg(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
offset, i+1);
}
}
}
return;
}
alt_index = alt_num - 1;
if (pin_desc->altcx[alt_index].used == false) {
dev_warn(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i does not exist\n",
offset, alt_num);
return;
}
/*
* Check if any other ALTCx functions are activated on this pin
* and disable it first.
*/
for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) {
if (i == alt_index)
continue;
if (pin_desc->altcx[i].used == true) {
reg = gpiocr_regs[pin_desc->altcx[i].reg_index];
bit = pin_desc->altcx[i].control_bit;
if (prcmu_read(reg) & BIT(bit)) {
prcmu_write_masked(reg, BIT(bit), 0);
dev_dbg(npct->dev,
"PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n",
offset, i+1);
}
}
}
reg = gpiocr_regs[pin_desc->altcx[alt_index].reg_index];
bit = pin_desc->altcx[alt_index].control_bit;
dev_dbg(npct->dev, "PRCM GPIOCR: pin %i: alternate-C%i has been selected\n",
offset, alt_index+1);
prcmu_write_masked(reg, BIT(bit), BIT(bit));
}
static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
pin_cfg_t cfg, bool sleep, unsigned int *slpmregs)
{
static const char *afnames[] = {
[NMK_GPIO_ALT_GPIO] = "GPIO",
[NMK_GPIO_ALT_A] = "A",
[NMK_GPIO_ALT_B] = "B",
[NMK_GPIO_ALT_C] = "C"
};
static const char *pullnames[] = {
[NMK_GPIO_PULL_NONE] = "none",
[NMK_GPIO_PULL_UP] = "up",
[NMK_GPIO_PULL_DOWN] = "down",
[3] /* illegal */ = "??"
};
static const char *slpmnames[] = {
[NMK_GPIO_SLPM_INPUT] = "input/wakeup",
[NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
};
int pin = PIN_NUM(cfg);
int pull = PIN_PULL(cfg);
int af = PIN_ALT(cfg);
int slpm = PIN_SLPM(cfg);
int output = PIN_DIR(cfg);
int val = PIN_VAL(cfg);
bool glitch = af == NMK_GPIO_ALT_C;
dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
output ? "output " : "input",
output ? (val ? "high" : "low") : "");
if (sleep) {
int slpm_pull = PIN_SLPM_PULL(cfg);
int slpm_output = PIN_SLPM_DIR(cfg);
int slpm_val = PIN_SLPM_VAL(cfg);
af = NMK_GPIO_ALT_GPIO;
/*
* The SLPM_* values are normal values + 1 to allow zero to
* mean "same as normal".
*/
if (slpm_pull)
pull = slpm_pull - 1;
if (slpm_output)
output = slpm_output - 1;
if (slpm_val)
val = slpm_val - 1;
dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
pin,
slpm_pull ? pullnames[pull] : "same",
slpm_output ? (output ? "output" : "input") : "same",
slpm_val ? (val ? "high" : "low") : "same");
}
if (output)
__nmk_gpio_make_output(nmk_chip, offset, val);
else {
__nmk_gpio_make_input(nmk_chip, offset);
__nmk_gpio_set_pull(nmk_chip, offset, pull);
}
__nmk_gpio_set_lowemi(nmk_chip, offset, PIN_LOWEMI(cfg));
/*
* If the pin is switching to altfunc, and there was an interrupt
* installed on it which has been lazy disabled, actually mask the
* interrupt to prevent spurious interrupts that would occur while the
* pin is under control of the peripheral. Only SKE does this.
*/
if (af != NMK_GPIO_ALT_GPIO)
nmk_gpio_disable_lazy_irq(nmk_chip, offset);
/*
* If we've backed up the SLPM registers (glitch workaround), modify
* the backups since they will be restored.
*/
if (slpmregs) {
if (slpm == NMK_GPIO_SLPM_NOCHANGE)
slpmregs[nmk_chip->bank] |= BIT(offset);
else
slpmregs[nmk_chip->bank] &= ~BIT(offset);
} else
__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
__nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch);
}
/*
* Safe sequence used to switch IOs between GPIO and Alternate-C mode:
* - Save SLPM registers
* - Set SLPM=0 for the IOs you want to switch and others to 1
* - Configure the GPIO registers for the IOs that are being switched
* - Set IOFORCE=1
* - Modify the AFLSA/B registers for the IOs that are being switched
* - Set IOFORCE=0
* - Restore SLPM registers
* - Any spurious wake up event during switch sequence to be ignored and
* cleared
*/
static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
unsigned int temp = slpm[i];
if (!chip)
break;
clk_enable(chip->clk);
slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
writel(temp, chip->addr + NMK_GPIO_SLPC);
}
}
static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
if (!chip)
break;
writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
clk_disable(chip->clk);
}
}
static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
{
static unsigned int slpm[NUM_BANKS];
unsigned long flags;
bool glitch = false;
int ret = 0;
int i;
for (i = 0; i < num; i++) {
if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) {
glitch = true;
break;
}
}
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
if (glitch) {
memset(slpm, 0xff, sizeof(slpm));
for (i = 0; i < num; i++) {
int pin = PIN_NUM(cfgs[i]);
int offset = pin % NMK_GPIO_PER_CHIP;
if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C)
slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset);
}
nmk_gpio_glitch_slpm_init(slpm);
}
for (i = 0; i < num; i++) {
struct nmk_gpio_chip *nmk_chip;
int pin = PIN_NUM(cfgs[i]);
nmk_chip = nmk_gpio_chips[pin / NMK_GPIO_PER_CHIP];
if (!nmk_chip) {
ret = -EINVAL;
break;
}
clk_enable(nmk_chip->clk);
spin_lock(&nmk_chip->lock);
__nmk_config_pin(nmk_chip, pin % NMK_GPIO_PER_CHIP,
cfgs[i], sleep, glitch ? slpm : NULL);
spin_unlock(&nmk_chip->lock);
clk_disable(nmk_chip->clk);
}
if (glitch)
nmk_gpio_glitch_slpm_restore(slpm);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
return ret;
}
/**
* nmk_config_pin - configure a pin's mux attributes
* @cfg: pin confguration
* @sleep: Non-zero to apply the sleep mode configuration
* Configures a pin's mode (alternate function or GPIO), its pull up status,
* and its sleep mode based on the specified configuration. The @cfg is
* usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
* are constructed using, and can be further enhanced with, the macros in
* plat/pincfg.h.
*
* If a pin's mode is set to GPIO, it is configured as an input to avoid
* side-effects. The gpio can be manipulated later using standard GPIO API
* calls.
*/
int nmk_config_pin(pin_cfg_t cfg, bool sleep)
{
return __nmk_config_pins(&cfg, 1, sleep);
}
EXPORT_SYMBOL(nmk_config_pin);
/**
* nmk_config_pins - configure several pins at once
* @cfgs: array of pin configurations
* @num: number of elments in the array
*
* Configures several pins using nmk_config_pin(). Refer to that function for
* further information.
*/
int nmk_config_pins(pin_cfg_t *cfgs, int num)
{
return __nmk_config_pins(cfgs, num, false);
}
EXPORT_SYMBOL(nmk_config_pins);
int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
{
return __nmk_config_pins(cfgs, num, true);
}
EXPORT_SYMBOL(nmk_config_pins_sleep);
/**
* nmk_gpio_set_slpm() - configure the sleep mode of a pin
* @gpio: pin number
* @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
*
* This register is actually in the pinmux layer, not the GPIO block itself.
* The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP
* mode is entered (i.e. when signal IOFORCE is HIGH by the platform code).
* Each GPIO can be configured to be forced into GPIO mode when IOFORCE is
* HIGH, overriding the normal setting defined by GPIO_AFSELx registers.
* When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit),
* the GPIOs return to the normal setting defined by GPIO_AFSELx registers.
*
* If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO
* mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is
* entered) regardless of the altfunction selected. Also wake-up detection is
* ENABLED.
*
* If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains
* controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS
* (for altfunction GPIO) or respective on-chip peripherals (for other
* altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED.
*
* Note that enable_irq_wake() will automatically enable wakeup detection.
*/
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
{
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
if (!nmk_chip)
return -EINVAL;
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
__nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP, mode);
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
/**
* nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
* @gpio: pin number
* @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
*
* Enables/disables pull up/down on a specified pin. This only takes effect if
* the pin is configured as an input (either explicitly or by the alternate
* function).
*
* NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
* configured as an input. Otherwise, due to the way the controller registers
* work, this function will change the value output on the pin.
*/
int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
{
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
if (!nmk_chip)
return -EINVAL;
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
__nmk_gpio_set_pull(nmk_chip, gpio % NMK_GPIO_PER_CHIP, pull);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
/* Mode functions */
/**
* nmk_gpio_set_mode() - set the mux mode of a gpio pin
* @gpio: pin number
* @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A,
* NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C
*
* Sets the mode of the specified pin to one of the alternate functions or
* plain GPIO.
*/
int nmk_gpio_set_mode(int gpio, int gpio_mode)
{
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
if (!nmk_chip)
return -EINVAL;
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
__nmk_gpio_set_mode(nmk_chip, gpio % NMK_GPIO_PER_CHIP, gpio_mode);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
EXPORT_SYMBOL(nmk_gpio_set_mode);
int nmk_gpio_get_mode(int gpio)
{
struct nmk_gpio_chip *nmk_chip;
u32 afunc, bfunc, bit;
nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP];
if (!nmk_chip)
return -EINVAL;
bit = 1 << (gpio % NMK_GPIO_PER_CHIP);
clk_enable(nmk_chip->clk);
afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
clk_disable(nmk_chip->clk);
return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
}
EXPORT_SYMBOL(nmk_gpio_get_mode);
/* IRQ functions */
static inline int nmk_gpio_get_bitmask(int gpio)
{
return 1 << (gpio % NMK_GPIO_PER_CHIP);
}
static void nmk_gpio_irq_ack(struct irq_data *d)
{
struct nmk_gpio_chip *nmk_chip;
nmk_chip = irq_data_get_irq_chip_data(d);
if (!nmk_chip)
return;
clk_enable(nmk_chip->clk);
writel(nmk_gpio_get_bitmask(d->hwirq), nmk_chip->addr + NMK_GPIO_IC);
clk_disable(nmk_chip->clk);
}
enum nmk_gpio_irq_type {
NORMAL,
WAKE,
};
static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
int gpio, enum nmk_gpio_irq_type which,
bool enable)
{
u32 bitmask = nmk_gpio_get_bitmask(gpio);
u32 *rimscval;
u32 *fimscval;
u32 rimscreg;
u32 fimscreg;
if (which == NORMAL) {
rimscreg = NMK_GPIO_RIMSC;
fimscreg = NMK_GPIO_FIMSC;
rimscval = &nmk_chip->rimsc;
fimscval = &nmk_chip->fimsc;
} else {
rimscreg = NMK_GPIO_RWIMSC;
fimscreg = NMK_GPIO_FWIMSC;
rimscval = &nmk_chip->rwimsc;
fimscval = &nmk_chip->fwimsc;
}
/* we must individually set/clear the two edges */
if (nmk_chip->edge_rising & bitmask) {
if (enable)
*rimscval |= bitmask;
else
*rimscval &= ~bitmask;
writel(*rimscval, nmk_chip->addr + rimscreg);
}
if (nmk_chip->edge_falling & bitmask) {
if (enable)
*fimscval |= bitmask;
else
*fimscval &= ~bitmask;
writel(*fimscval, nmk_chip->addr + fimscreg);
}
}
static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
int gpio, bool on)
{
/*
* Ensure WAKEUP_ENABLE is on. No need to disable it if wakeup is
* disabled, since setting SLPM to 1 increases power consumption, and
* wakeup is anyhow controlled by the RIMSC and FIMSC registers.
*/
if (nmk_chip->sleepmode && on) {
__nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP,
NMK_GPIO_SLPM_WAKEUP_ENABLE);
}
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
}
static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
{
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
u32 bitmask;
nmk_chip = irq_data_get_irq_chip_data(d);
bitmask = nmk_gpio_get_bitmask(d->hwirq);
if (!nmk_chip)
return -EINVAL;
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, enable);
if (!(nmk_chip->real_wake & bitmask))
__nmk_gpio_set_wake(nmk_chip, d->hwirq, enable);
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
static void nmk_gpio_irq_mask(struct irq_data *d)
{
nmk_gpio_irq_maskunmask(d, false);
}
static void nmk_gpio_irq_unmask(struct irq_data *d)
{
nmk_gpio_irq_maskunmask(d, true);
}
static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
{
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
u32 bitmask;
nmk_chip = irq_data_get_irq_chip_data(d);
if (!nmk_chip)
return -EINVAL;
bitmask = nmk_gpio_get_bitmask(d->hwirq);
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
spin_lock(&nmk_chip->lock);
if (irqd_irq_disabled(d))
__nmk_gpio_set_wake(nmk_chip, d->hwirq, on);
if (on)
nmk_chip->real_wake |= bitmask;
else
nmk_chip->real_wake &= ~bitmask;
spin_unlock(&nmk_chip->lock);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
bool enabled = !irqd_irq_disabled(d);
bool wake = irqd_is_wakeup_set(d);
struct nmk_gpio_chip *nmk_chip;
unsigned long flags;
u32 bitmask;
nmk_chip = irq_data_get_irq_chip_data(d);
bitmask = nmk_gpio_get_bitmask(d->hwirq);
if (!nmk_chip)
return -EINVAL;
if (type & IRQ_TYPE_LEVEL_HIGH)
return -EINVAL;
if (type & IRQ_TYPE_LEVEL_LOW)
return -EINVAL;
clk_enable(nmk_chip->clk);
spin_lock_irqsave(&nmk_chip->lock, flags);
if (enabled)
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, false);
if (enabled || wake)
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, false);
nmk_chip->edge_rising &= ~bitmask;
if (type & IRQ_TYPE_EDGE_RISING)
nmk_chip->edge_rising |= bitmask;
nmk_chip->edge_falling &= ~bitmask;
if (type & IRQ_TYPE_EDGE_FALLING)
nmk_chip->edge_falling |= bitmask;
if (enabled)
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, true);
if (enabled || wake)
__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, true);
spin_unlock_irqrestore(&nmk_chip->lock, flags);
clk_disable(nmk_chip->clk);
return 0;
}
static unsigned int nmk_gpio_irq_startup(struct irq_data *d)
{
struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
clk_enable(nmk_chip->clk);
nmk_gpio_irq_unmask(d);
return 0;
}
static void nmk_gpio_irq_shutdown(struct irq_data *d)
{
struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
nmk_gpio_irq_mask(d);
clk_disable(nmk_chip->clk);
}
static struct irq_chip nmk_gpio_irq_chip = {
.name = "Nomadik-GPIO",
.irq_ack = nmk_gpio_irq_ack,
.irq_mask = nmk_gpio_irq_mask,
.irq_unmask = nmk_gpio_irq_unmask,
.irq_set_type = nmk_gpio_irq_set_type,
.irq_set_wake = nmk_gpio_irq_set_wake,
.irq_startup = nmk_gpio_irq_startup,
.irq_shutdown = nmk_gpio_irq_shutdown,
.flags = IRQCHIP_MASK_ON_SUSPEND,
};
static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
u32 status)
{
struct nmk_gpio_chip *nmk_chip;
struct irq_chip *host_chip = irq_get_chip(irq);
chained_irq_enter(host_chip, desc);
nmk_chip = irq_get_handler_data(irq);
while (status) {
int bit = __ffs(status);
generic_handle_irq(irq_find_mapping(nmk_chip->domain, bit));
status &= ~BIT(bit);
}
chained_irq_exit(host_chip, desc);
}
static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
u32 status;
clk_enable(nmk_chip->clk);
status = readl(nmk_chip->addr + NMK_GPIO_IS);
clk_disable(nmk_chip->clk);
__nmk_gpio_irq_handler(irq, desc, status);
}
static void nmk_gpio_secondary_irq_handler(unsigned int irq,
struct irq_desc *desc)
{
struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
u32 status = nmk_chip->get_secondary_status(nmk_chip->bank);
__nmk_gpio_irq_handler(irq, desc, status);
}
static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
{
irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
irq_set_handler_data(nmk_chip->parent_irq, nmk_chip);
if (nmk_chip->secondary_parent_irq >= 0) {
irq_set_chained_handler(nmk_chip->secondary_parent_irq,
nmk_gpio_secondary_irq_handler);
irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip);
}
return 0;
}
/* I/O Functions */
static int nmk_gpio_request(struct gpio_chip *chip, unsigned offset)
{
/*
* Map back to global GPIO space and request muxing, the direction
* parameter does not matter for this controller.
*/
int gpio = chip->base + offset;
return pinctrl_request_gpio(gpio);
}
static void nmk_gpio_free(struct gpio_chip *chip, unsigned offset)
{
int gpio = chip->base + offset;
pinctrl_free_gpio(gpio);
}
static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
clk_enable(nmk_chip->clk);
writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
clk_disable(nmk_chip->clk);
return 0;
}
static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
u32 bit = 1 << offset;
int value;
clk_enable(nmk_chip->clk);
value = (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
clk_disable(nmk_chip->clk);
return value;
}
static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
int val)
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
clk_enable(nmk_chip->clk);
__nmk_gpio_set_output(nmk_chip, offset, val);
clk_disable(nmk_chip->clk);
}
static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
int val)
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
clk_enable(nmk_chip->clk);
__nmk_gpio_make_output(nmk_chip, offset, val);
clk_disable(nmk_chip->clk);
return 0;
}
static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
return irq_find_mapping(nmk_chip->domain, offset);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/seq_file.h>
static void nmk_gpio_dbg_show_one(struct seq_file *s, struct gpio_chip *chip,
unsigned offset, unsigned gpio)
{
const char *label = gpiochip_is_requested(chip, offset);
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
int mode;
bool is_out;
bool pull;
u32 bit = 1 << offset;
const char *modes[] = {
[NMK_GPIO_ALT_GPIO] = "gpio",
[NMK_GPIO_ALT_A] = "altA",
[NMK_GPIO_ALT_B] = "altB",
[NMK_GPIO_ALT_C] = "altC",
};
clk_enable(nmk_chip->clk);
is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit);
pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit);
mode = nmk_gpio_get_mode(gpio);
seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s",
gpio, label ?: "(none)",
is_out ? "out" : "in ",
chip->get
? (chip->get(chip, offset) ? "hi" : "lo")
: "? ",
(mode < 0) ? "unknown" : modes[mode],
pull ? "pull" : "none");
if (label && !is_out) {
int irq = gpio_to_irq(gpio);
struct irq_desc *desc = irq_to_desc(irq);
/* This races with request_irq(), set_irq_type(),
* and set_irq_wake() ... but those are "rare".
*/
if (irq >= 0 && desc->action) {
char *trigger;
u32 bitmask = nmk_gpio_get_bitmask(gpio);
if (nmk_chip->edge_rising & bitmask)
trigger = "edge-rising";
else if (nmk_chip->edge_falling & bitmask)
trigger = "edge-falling";
else
trigger = "edge-undefined";
seq_printf(s, " irq-%d %s%s",
irq, trigger,
irqd_is_wakeup_set(&desc->irq_data)
? " wakeup" : "");
}
}
clk_disable(nmk_chip->clk);
}
static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
unsigned i;
unsigned gpio = chip->base;
for (i = 0; i < chip->ngpio; i++, gpio++) {
nmk_gpio_dbg_show_one(s, chip, i, gpio);
seq_printf(s, "\n");
}
}
#else
static inline void nmk_gpio_dbg_show_one(struct seq_file *s,
struct gpio_chip *chip,
unsigned offset, unsigned gpio)
{
}
#define nmk_gpio_dbg_show NULL
#endif
/* This structure is replicated for each GPIO block allocated at probe time */
static struct gpio_chip nmk_gpio_template = {
.request = nmk_gpio_request,
.free = nmk_gpio_free,
.direction_input = nmk_gpio_make_input,
.get = nmk_gpio_get_input,
.direction_output = nmk_gpio_make_output,
.set = nmk_gpio_set_output,
.to_irq = nmk_gpio_to_irq,
.dbg_show = nmk_gpio_dbg_show,
.can_sleep = 0,
};
void nmk_gpio_clocks_enable(void)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
if (!chip)
continue;
clk_enable(chip->clk);
}
}
void nmk_gpio_clocks_disable(void)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
if (!chip)
continue;
clk_disable(chip->clk);
}
}
/*
* Called from the suspend/resume path to only keep the real wakeup interrupts
* (those that have had set_irq_wake() called on them) as wakeup interrupts,
* and not the rest of the interrupts which we needed to have as wakeups for
* cpuidle.
*
* PM ops are not used since this needs to be done at the end, after all the
* other drivers are done with their suspend callbacks.
*/
void nmk_gpio_wakeups_suspend(void)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
if (!chip)
break;
clk_enable(chip->clk);
writel(chip->rwimsc & chip->real_wake,
chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc & chip->real_wake,
chip->addr + NMK_GPIO_FWIMSC);
clk_disable(chip->clk);
}
}
void nmk_gpio_wakeups_resume(void)
{
int i;
for (i = 0; i < NUM_BANKS; i++) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
if (!chip)
break;
clk_enable(chip->clk);
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
clk_disable(chip->clk);
}
}
/*
* Read the pull up/pull down status.
* A bit set in 'pull_up' means that pull up
* is selected if pull is enabled in PDIS register.
* Note: only pull up/down set via this driver can
* be detected due to HW limitations.
*/
void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up)
{
if (gpio_bank < NUM_BANKS) {
struct nmk_gpio_chip *chip = nmk_gpio_chips[gpio_bank];
if (!chip)
return;
*pull_up = chip->pull_up;
}
}
int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct nmk_gpio_chip *nmk_chip = d->host_data;
if (!nmk_chip)
return -EINVAL;
irq_set_chip_and_handler(irq, &nmk_gpio_irq_chip, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID);
irq_set_chip_data(irq, nmk_chip);
irq_set_irq_type(irq, IRQ_TYPE_EDGE_FALLING);
return 0;
}
const struct irq_domain_ops nmk_gpio_irq_simple_ops = {
.map = nmk_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static int __devinit nmk_gpio_probe(struct platform_device *dev)
{
struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
struct device_node *np = dev->dev.of_node;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
struct resource *res;
struct clk *clk;
int secondary_irq;
void __iomem *base;
int irq;
int ret;
if (!pdata && !np) {
dev_err(&dev->dev, "No platform data or device tree found\n");
return -ENODEV;
}
if (np) {
pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
if (of_get_property(np, "st,supports-sleepmode", NULL))
pdata->supports_sleepmode = true;
if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
dev_err(&dev->dev, "gpio-bank property not found\n");
ret = -EINVAL;
goto out;
}
pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
pdata->num_gpio = NMK_GPIO_PER_CHIP;
}
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENOENT;
goto out;
}
irq = platform_get_irq(dev, 0);
if (irq < 0) {
ret = irq;
goto out;
}
secondary_irq = platform_get_irq(dev, 1);
if (secondary_irq >= 0 && !pdata->get_secondary_status) {
ret = -EINVAL;
goto out;
}
base = devm_request_and_ioremap(&dev->dev, res);
if (!base) {
ret = -ENOMEM;
goto out;
}
clk = devm_clk_get(&dev->dev, NULL);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
goto out;
}
clk_prepare(clk);
nmk_chip = devm_kzalloc(&dev->dev, sizeof(*nmk_chip), GFP_KERNEL);
if (!nmk_chip) {
ret = -ENOMEM;
goto out;
}
/*
* The virt address in nmk_chip->addr is in the nomadik register space,
* so we can simply convert the resource address, without remapping
*/
nmk_chip->bank = dev->id;
nmk_chip->clk = clk;
nmk_chip->addr = base;
nmk_chip->chip = nmk_gpio_template;
nmk_chip->parent_irq = irq;
nmk_chip->secondary_parent_irq = secondary_irq;
nmk_chip->get_secondary_status = pdata->get_secondary_status;
nmk_chip->set_ioforce = pdata->set_ioforce;
nmk_chip->sleepmode = pdata->supports_sleepmode;
spin_lock_init(&nmk_chip->lock);
chip = &nmk_chip->chip;
chip->base = pdata->first_gpio;
chip->ngpio = pdata->num_gpio;
chip->label = pdata->name ?: dev_name(&dev->dev);
chip->dev = &dev->dev;
chip->owner = THIS_MODULE;
clk_enable(nmk_chip->clk);
nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
clk_disable(nmk_chip->clk);
#ifdef CONFIG_OF_GPIO
chip->of_node = np;
#endif
ret = gpiochip_add(&nmk_chip->chip);
if (ret)
goto out;
BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
nmk_gpio_chips[nmk_chip->bank] = nmk_chip;
platform_set_drvdata(dev, nmk_chip);
if (np) {
/* The DT case will just grab a set of IRQ numbers */
nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP,
&nmk_gpio_irq_simple_ops, nmk_chip);
} else {
/* Non-DT legacy mode, use hardwired IRQ numbers */
int irq_start;
irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
nmk_chip->domain = irq_domain_add_simple(NULL,
NMK_GPIO_PER_CHIP, irq_start,
&nmk_gpio_irq_simple_ops, nmk_chip);
}
if (!nmk_chip->domain) {
dev_err(&dev->dev, "failed to create irqdomain\n");
ret = -ENOSYS;
goto out;
}
nmk_gpio_init_irq(nmk_chip);
dev_info(&dev->dev, "at address %p\n", nmk_chip->addr);
return 0;
out:
dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
pdata->first_gpio, pdata->first_gpio+31);
return ret;
}
static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
return npct->soc->ngroups;
}
static const char *nmk_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
return npct->soc->groups[selector].name;
}
static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
const unsigned **pins,
unsigned *num_pins)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
*pins = npct->soc->groups[selector].pins;
*num_pins = npct->soc->groups[selector].npins;
return 0;
}
static struct pinctrl_gpio_range *
nmk_match_gpio_range(struct pinctrl_dev *pctldev, unsigned offset)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
int i;
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
struct pinctrl_gpio_range *range;
range = &npct->soc->gpio_ranges[i];
if (offset >= range->pin_base &&
offset <= (range->pin_base + range->npins - 1))
return range;
}
return NULL;
}
static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
unsigned offset)
{
struct pinctrl_gpio_range *range;
struct gpio_chip *chip;
range = nmk_match_gpio_range(pctldev, offset);
if (!range || !range->gc) {
seq_printf(s, "invalid pin offset");
return;
}
chip = range->gc;
nmk_gpio_dbg_show_one(s, chip, offset - chip->base, offset);
}
static struct pinctrl_ops nmk_pinctrl_ops = {
.get_groups_count = nmk_get_groups_cnt,
.get_group_name = nmk_get_group_name,
.get_group_pins = nmk_get_group_pins,
.pin_dbg_show = nmk_pin_dbg_show,
};
static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
return npct->soc->nfunctions;
}
static const char *nmk_pmx_get_func_name(struct pinctrl_dev *pctldev,
unsigned function)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
return npct->soc->functions[function].name;
}
static int nmk_pmx_get_func_groups(struct pinctrl_dev *pctldev,
unsigned function,
const char * const **groups,
unsigned * const num_groups)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
*groups = npct->soc->functions[function].groups;
*num_groups = npct->soc->functions[function].ngroups;
return 0;
}
static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
unsigned group)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
const struct nmk_pingroup *g;
static unsigned int slpm[NUM_BANKS];
unsigned long flags;
bool glitch;
int ret = -EINVAL;
int i;
g = &npct->soc->groups[group];
if (g->altsetting < 0)
return -EINVAL;
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
/*
* If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
* we may pass through an undesired state. In this case we take
* some extra care.
*
* Safe sequence used to switch IOs between GPIO and Alternate-C mode:
* - Save SLPM registers (since we have a shadow register in the
* nmk_chip we're using that as backup)
* - Set SLPM=0 for the IOs you want to switch and others to 1
* - Configure the GPIO registers for the IOs that are being switched
* - Set IOFORCE=1
* - Modify the AFLSA/B registers for the IOs that are being switched
* - Set IOFORCE=0
* - Restore SLPM registers
* - Any spurious wake up event during switch sequence to be ignored
* and cleared
*
* We REALLY need to save ALL slpm registers, because the external
* IOFORCE will switch *all* ports to their sleepmode setting to as
* to avoid glitches. (Not just one port!)
*/
glitch = ((g->altsetting & NMK_GPIO_ALT_C) == NMK_GPIO_ALT_C);
if (glitch) {
spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
/* Initially don't put any pins to sleep when switching */
memset(slpm, 0xff, sizeof(slpm));
/*
* Then mask the pins that need to be sleeping now when we're
* switching to the ALT C function.
*/
for (i = 0; i < g->npins; i++)
slpm[g->pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->pins[i]);
nmk_gpio_glitch_slpm_init(slpm);
}
for (i = 0; i < g->npins; i++) {
struct pinctrl_gpio_range *range;
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
unsigned bit;
range = nmk_match_gpio_range(pctldev, g->pins[i]);
if (!range) {
dev_err(npct->dev,
"invalid pin offset %d in group %s at index %d\n",
g->pins[i], g->name, i);
goto out_glitch;
}
if (!range->gc) {
dev_err(npct->dev, "GPIO chip missing in range for pin offset %d in group %s at index %d\n",
g->pins[i], g->name, i);
goto out_glitch;
}
chip = range->gc;
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
dev_dbg(npct->dev, "setting pin %d to altsetting %d\n", g->pins[i], g->altsetting);
clk_enable(nmk_chip->clk);
bit = g->pins[i] % NMK_GPIO_PER_CHIP;
/*
* If the pin is switching to altfunc, and there was an
* interrupt installed on it which has been lazy disabled,
* actually mask the interrupt to prevent spurious interrupts
* that would occur while the pin is under control of the
* peripheral. Only SKE does this.
*/
nmk_gpio_disable_lazy_irq(nmk_chip, bit);
__nmk_gpio_set_mode_safe(nmk_chip, bit,
(g->altsetting & NMK_GPIO_ALT_C), glitch);
clk_disable(nmk_chip->clk);
/*
* Call PRCM GPIOCR config function in case ALTC
* has been selected:
* - If selection is a ALTCx, some bits in PRCM GPIOCR registers
* must be set.
* - If selection is pure ALTC and previous selection was ALTCx,
* then some bits in PRCM GPIOCR registers must be cleared.
*/
if ((g->altsetting & NMK_GPIO_ALT_C) == NMK_GPIO_ALT_C)
nmk_prcm_altcx_set_mode(npct, g->pins[i],
g->altsetting >> NMK_GPIO_ALT_CX_SHIFT);
}
/* When all pins are successfully reconfigured we get here */
ret = 0;
out_glitch:
if (glitch) {
nmk_gpio_glitch_slpm_restore(slpm);
spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
}
return ret;
}
static void nmk_pmx_disable(struct pinctrl_dev *pctldev,
unsigned function, unsigned group)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
const struct nmk_pingroup *g;
g = &npct->soc->groups[group];
if (g->altsetting < 0)
return;
/* Poke out the mux, set the pin to some default state? */
dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins);
}
int nmk_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
struct nmk_gpio_chip *nmk_chip;
struct gpio_chip *chip;
unsigned bit;
if (!range) {
dev_err(npct->dev, "invalid range\n");
return -EINVAL;
}
if (!range->gc) {
dev_err(npct->dev, "missing GPIO chip in range\n");
return -EINVAL;
}
chip = range->gc;
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
clk_enable(nmk_chip->clk);
bit = offset % NMK_GPIO_PER_CHIP;
/* There is no glitch when converting any pin to GPIO */
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
clk_disable(nmk_chip->clk);
return 0;
}
void nmk_gpio_disable_free(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset)
{
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
/* Set the pin to some default state, GPIO is usually default */
}
static struct pinmux_ops nmk_pinmux_ops = {
.get_functions_count = nmk_pmx_get_funcs_cnt,
.get_function_name = nmk_pmx_get_func_name,
.get_function_groups = nmk_pmx_get_func_groups,
.enable = nmk_pmx_enable,
.disable = nmk_pmx_disable,
.gpio_request_enable = nmk_gpio_request_enable,
.gpio_disable_free = nmk_gpio_disable_free,
};
int nmk_pin_config_get(struct pinctrl_dev *pctldev,
unsigned pin,
unsigned long *config)
{
/* Not implemented */
return -EINVAL;
}
int nmk_pin_config_set(struct pinctrl_dev *pctldev,
unsigned pin,
unsigned long config)
{
static const char *pullnames[] = {
[NMK_GPIO_PULL_NONE] = "none",
[NMK_GPIO_PULL_UP] = "up",
[NMK_GPIO_PULL_DOWN] = "down",
[3] /* illegal */ = "??"
};
static const char *slpmnames[] = {
[NMK_GPIO_SLPM_INPUT] = "input/wakeup",
[NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
};
struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
struct nmk_gpio_chip *nmk_chip;
struct pinctrl_gpio_range *range;
struct gpio_chip *chip;
unsigned bit;
/*
* The pin config contains pin number and altfunction fields, here
* we just ignore that part. It's being handled by the framework and
* pinmux callback respectively.
*/
pin_cfg_t cfg = (pin_cfg_t) config;
int pull = PIN_PULL(cfg);
int slpm = PIN_SLPM(cfg);
int output = PIN_DIR(cfg);
int val = PIN_VAL(cfg);
bool lowemi = PIN_LOWEMI(cfg);
bool gpiomode = PIN_GPIOMODE(cfg);
bool sleep = PIN_SLEEPMODE(cfg);
range = nmk_match_gpio_range(pctldev, pin);
if (!range) {
dev_err(npct->dev, "invalid pin offset %d\n", pin);
return -EINVAL;
}
if (!range->gc) {
dev_err(npct->dev, "GPIO chip missing in range for pin %d\n",
pin);
return -EINVAL;
}
chip = range->gc;
nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
if (sleep) {
int slpm_pull = PIN_SLPM_PULL(cfg);
int slpm_output = PIN_SLPM_DIR(cfg);
int slpm_val = PIN_SLPM_VAL(cfg);
/* All pins go into GPIO mode at sleep */
gpiomode = true;
/*
* The SLPM_* values are normal values + 1 to allow zero to
* mean "same as normal".
*/
if (slpm_pull)
pull = slpm_pull - 1;
if (slpm_output)
output = slpm_output - 1;
if (slpm_val)
val = slpm_val - 1;
dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
pin,
slpm_pull ? pullnames[pull] : "same",
slpm_output ? (output ? "output" : "input") : "same",
slpm_val ? (val ? "high" : "low") : "same");
}
dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n",
pin, cfg, pullnames[pull], slpmnames[slpm],
output ? "output " : "input",
output ? (val ? "high" : "low") : "",
lowemi ? "on" : "off" );
clk_enable(nmk_chip->clk);
bit = pin % NMK_GPIO_PER_CHIP;
if (gpiomode)
/* No glitch when going to GPIO mode */
__nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO);
if (output)
__nmk_gpio_make_output(nmk_chip, bit, val);
else {
__nmk_gpio_make_input(nmk_chip, bit);
__nmk_gpio_set_pull(nmk_chip, bit, pull);
}
/* TODO: isn't this only applicable on output pins? */
__nmk_gpio_set_lowemi(nmk_chip, bit, lowemi);
__nmk_gpio_set_slpm(nmk_chip, bit, slpm);
clk_disable(nmk_chip->clk);
return 0;
}
static struct pinconf_ops nmk_pinconf_ops = {
.pin_config_get = nmk_pin_config_get,
.pin_config_set = nmk_pin_config_set,
};
static struct pinctrl_desc nmk_pinctrl_desc = {
.name = "pinctrl-nomadik",
.pctlops = &nmk_pinctrl_ops,
.pmxops = &nmk_pinmux_ops,
.confops = &nmk_pinconf_ops,
.owner = THIS_MODULE,
};
static const struct of_device_id nmk_pinctrl_match[] = {
{
.compatible = "stericsson,nmk_pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},
{},
};
static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
{
const struct platform_device_id *platid = platform_get_device_id(pdev);
struct device_node *np = pdev->dev.of_node;
struct nmk_pinctrl *npct;
unsigned int version = 0;
int i;
npct = devm_kzalloc(&pdev->dev, sizeof(*npct), GFP_KERNEL);
if (!npct)
return -ENOMEM;
if (platid)
version = platid->driver_data;
else if (np)
version = (unsigned int)
of_match_device(nmk_pinctrl_match, &pdev->dev)->data;
/* Poke in other ASIC variants here */
if (version == PINCTRL_NMK_STN8815)
nmk_pinctrl_stn8815_init(&npct->soc);
if (version == PINCTRL_NMK_DB8500)
nmk_pinctrl_db8500_init(&npct->soc);
if (version == PINCTRL_NMK_DB8540)
nmk_pinctrl_db8540_init(&npct->soc);
/*
* We need all the GPIO drivers to probe FIRST, or we will not be able
* to obtain references to the struct gpio_chip * for them, and we
* need this to proceed.
*/
for (i = 0; i < npct->soc->gpio_num_ranges; i++) {
if (!nmk_gpio_chips[i]) {
dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i);
return -EPROBE_DEFER;
}
npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[i]->chip;
}
nmk_pinctrl_desc.pins = npct->soc->pins;
nmk_pinctrl_desc.npins = npct->soc->npins;
npct->dev = &pdev->dev;
npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct);
if (!npct->pctl) {
dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n");
return -EINVAL;
}
/* We will handle a range of GPIO pins */
for (i = 0; i < npct->soc->gpio_num_ranges; i++)
pinctrl_add_gpio_range(npct->pctl, &npct->soc->gpio_ranges[i]);
platform_set_drvdata(pdev, npct);
dev_info(&pdev->dev, "initialized Nomadik pin control driver\n");
return 0;
}
static const struct of_device_id nmk_gpio_match[] = {
{ .compatible = "st,nomadik-gpio", },
{}
};
static struct platform_driver nmk_gpio_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "gpio",
.of_match_table = nmk_gpio_match,
},
.probe = nmk_gpio_probe,
};
static const struct platform_device_id nmk_pinctrl_id[] = {
{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
{ "pinctrl-db8540", PINCTRL_NMK_DB8540 },
};
static struct platform_driver nmk_pinctrl_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "pinctrl-nomadik",
.of_match_table = nmk_pinctrl_match,
},
.probe = nmk_pinctrl_probe,
.id_table = nmk_pinctrl_id,
};
static int __init nmk_gpio_init(void)
{
int ret;
ret = platform_driver_register(&nmk_gpio_driver);
if (ret)
return ret;
return platform_driver_register(&nmk_pinctrl_driver);
}
core_initcall(nmk_gpio_init);
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
MODULE_DESCRIPTION("Nomadik GPIO Driver");
MODULE_LICENSE("GPL");