| The cx23416 can produce (and the cx23415 can also read) raw YUV output. The | 
 | format of a YUV frame is specific to this chip and is called HM12. 'HM' stands | 
 | for 'Hauppauge Macroblock', which is a misnomer as 'Conexant Macroblock' would | 
 | be more accurate. | 
 |  | 
 | The format is YUV 4:2:0 which uses 1 Y byte per pixel and 1 U and V byte per | 
 | four pixels. | 
 |  | 
 | The data is encoded as two macroblock planes, the first containing the Y | 
 | values, the second containing UV macroblocks. | 
 |  | 
 | The Y plane is divided into blocks of 16x16 pixels from left to right | 
 | and from top to bottom. Each block is transmitted in turn, line-by-line. | 
 |  | 
 | So the first 16 bytes are the first line of the top-left block, the | 
 | second 16 bytes are the second line of the top-left block, etc. After | 
 | transmitting this block the first line of the block on the right to the | 
 | first block is transmitted, etc. | 
 |  | 
 | The UV plane is divided into blocks of 16x8 UV values going from left | 
 | to right, top to bottom. Each block is transmitted in turn, line-by-line. | 
 |  | 
 | So the first 16 bytes are the first line of the top-left block and | 
 | contain 8 UV value pairs (16 bytes in total). The second 16 bytes are the | 
 | second line of 8 UV pairs of the top-left block, etc. After transmitting | 
 | this block the first line of the block on the right to the first block is | 
 | transmitted, etc. | 
 |  | 
 | The code below is given as an example on how to convert HM12 to separate | 
 | Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels. | 
 |  | 
 | The width of a frame is always 720 pixels, regardless of the actual specified | 
 | width. | 
 |  | 
 | If the height is not a multiple of 32 lines, then the captured video is | 
 | missing macroblocks at the end and is unusable. So the height must be a | 
 | multiple of 32. | 
 |  | 
 | -------------------------------------------------------------------------- | 
 |  | 
 | #include <stdio.h> | 
 | #include <stdlib.h> | 
 | #include <string.h> | 
 |  | 
 | static unsigned char frame[576*720*3/2]; | 
 | static unsigned char framey[576*720]; | 
 | static unsigned char frameu[576*720 / 4]; | 
 | static unsigned char framev[576*720 / 4]; | 
 |  | 
 | static void de_macro_y(unsigned char* dst, unsigned char *src, int dstride, int w, int h) | 
 | { | 
 |     unsigned int y, x, i; | 
 |  | 
 |     // descramble Y plane | 
 |     // dstride = 720 = w | 
 |     // The Y plane is divided into blocks of 16x16 pixels | 
 |     // Each block in transmitted in turn, line-by-line. | 
 |     for (y = 0; y < h; y += 16) { | 
 | 	for (x = 0; x < w; x += 16) { | 
 | 	    for (i = 0; i < 16; i++) { | 
 | 		memcpy(dst + x + (y + i) * dstride, src, 16); | 
 | 		src += 16; | 
 | 	    } | 
 | 	} | 
 |     } | 
 | } | 
 |  | 
 | static void de_macro_uv(unsigned char *dstu, unsigned char *dstv, unsigned char *src, int dstride, int w, int h) | 
 | { | 
 |     unsigned int y, x, i; | 
 |  | 
 |     // descramble U/V plane | 
 |     // dstride = 720 / 2 = w | 
 |     // The U/V values are interlaced (UVUV...). | 
 |     // Again, the UV plane is divided into blocks of 16x16 UV values. | 
 |     // Each block in transmitted in turn, line-by-line. | 
 |     for (y = 0; y < h; y += 16) { | 
 | 	for (x = 0; x < w; x += 8) { | 
 | 	    for (i = 0; i < 16; i++) { | 
 | 		int idx = x + (y + i) * dstride; | 
 |  | 
 | 		dstu[idx+0] = src[0];  dstv[idx+0] = src[1]; | 
 | 		dstu[idx+1] = src[2];  dstv[idx+1] = src[3]; | 
 | 		dstu[idx+2] = src[4];  dstv[idx+2] = src[5]; | 
 | 		dstu[idx+3] = src[6];  dstv[idx+3] = src[7]; | 
 | 		dstu[idx+4] = src[8];  dstv[idx+4] = src[9]; | 
 | 		dstu[idx+5] = src[10]; dstv[idx+5] = src[11]; | 
 | 		dstu[idx+6] = src[12]; dstv[idx+6] = src[13]; | 
 | 		dstu[idx+7] = src[14]; dstv[idx+7] = src[15]; | 
 | 		src += 16; | 
 | 	    } | 
 | 	} | 
 |     } | 
 | } | 
 |  | 
 | /*************************************************************************/ | 
 | int main(int argc, char **argv) | 
 | { | 
 |     FILE *fin; | 
 |     int i; | 
 |  | 
 |     if (argc == 1) fin = stdin; | 
 |     else fin = fopen(argv[1], "r"); | 
 |  | 
 |     if (fin == NULL) { | 
 | 	fprintf(stderr, "cannot open input\n"); | 
 | 	exit(-1); | 
 |     } | 
 |     while (fread(frame, sizeof(frame), 1, fin) == 1) { | 
 | 	de_macro_y(framey, frame, 720, 720, 576); | 
 | 	de_macro_uv(frameu, framev, frame + 720 * 576, 720 / 2, 720 / 2, 576 / 2); | 
 | 	fwrite(framey, sizeof(framey), 1, stdout); | 
 | 	fwrite(framev, sizeof(framev), 1, stdout); | 
 | 	fwrite(frameu, sizeof(frameu), 1, stdout); | 
 |     } | 
 |     fclose(fin); | 
 |     return 0; | 
 | } | 
 |  | 
 | -------------------------------------------------------------------------- |