| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Focaltech TouchPad PS/2 mouse driver | |
| * | |
| * Copyright (c) 2014 Red Hat Inc. | |
| * Copyright (c) 2014 Mathias Gottschlag <mgottschlag@gmail.com> | |
| * | |
| * Red Hat authors: | |
| * | |
| * Hans de Goede <hdegoede@redhat.com> | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/libps2.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/serio.h> | |
| #include <linux/slab.h> | |
| #include "psmouse.h" | |
| #include "focaltech.h" | |
| static const char * const focaltech_pnp_ids[] = { | |
| "FLT0101", | |
| "FLT0102", | |
| "FLT0103", | |
| NULL | |
| }; | |
| /* | |
| * Even if the kernel is built without support for Focaltech PS/2 touchpads (or | |
| * when the real driver fails to recognize the device), we still have to detect | |
| * them in order to avoid further detection attempts confusing the touchpad. | |
| * This way it at least works in PS/2 mouse compatibility mode. | |
| */ | |
| int focaltech_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| if (!psmouse_matches_pnp_id(psmouse, focaltech_pnp_ids)) | |
| return -ENODEV; | |
| if (set_properties) { | |
| psmouse->vendor = "FocalTech"; | |
| psmouse->name = "Touchpad"; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_MOUSE_PS2_FOCALTECH | |
| /* | |
| * Packet types - the numbers are not consecutive, so we might be missing | |
| * something here. | |
| */ | |
| #define FOC_TOUCH 0x3 /* bitmap of active fingers */ | |
| #define FOC_ABS 0x6 /* absolute position of one finger */ | |
| #define FOC_REL 0x9 /* relative position of 1-2 fingers */ | |
| #define FOC_MAX_FINGERS 5 | |
| /* | |
| * Current state of a single finger on the touchpad. | |
| */ | |
| struct focaltech_finger_state { | |
| /* The touchpad has generated a touch event for the finger */ | |
| bool active; | |
| /* | |
| * The touchpad has sent position data for the finger. The | |
| * flag is 0 when the finger is not active, and there is a | |
| * time between the first touch event for the finger and the | |
| * following absolute position packet for the finger where the | |
| * touchpad has declared the finger to be valid, but we do not | |
| * have any valid position yet. | |
| */ | |
| bool valid; | |
| /* | |
| * Absolute position (from the bottom left corner) of the | |
| * finger. | |
| */ | |
| unsigned int x; | |
| unsigned int y; | |
| }; | |
| /* | |
| * Description of the current state of the touchpad hardware. | |
| */ | |
| struct focaltech_hw_state { | |
| /* | |
| * The touchpad tracks the positions of the fingers for us, | |
| * the array indices correspond to the finger indices returned | |
| * in the report packages. | |
| */ | |
| struct focaltech_finger_state fingers[FOC_MAX_FINGERS]; | |
| /* | |
| * Finger width 0-7 and 15 for a very big contact area. | |
| * 15 value stays until the finger is released. | |
| * Width is reported only in absolute packets. | |
| * Since hardware reports width only for last touching finger, | |
| * there is no need to store width for every specific finger, | |
| * so we keep only last value reported. | |
| */ | |
| unsigned int width; | |
| /* True if the clickpad has been pressed. */ | |
| bool pressed; | |
| }; | |
| struct focaltech_data { | |
| unsigned int x_max, y_max; | |
| struct focaltech_hw_state state; | |
| }; | |
| static void focaltech_report_state(struct psmouse *psmouse) | |
| { | |
| struct focaltech_data *priv = psmouse->private; | |
| struct focaltech_hw_state *state = &priv->state; | |
| struct input_dev *dev = psmouse->dev; | |
| int i; | |
| for (i = 0; i < FOC_MAX_FINGERS; i++) { | |
| struct focaltech_finger_state *finger = &state->fingers[i]; | |
| bool active = finger->active && finger->valid; | |
| input_mt_slot(dev, i); | |
| input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); | |
| if (active) { | |
| unsigned int clamped_x, clamped_y; | |
| /* | |
| * The touchpad might report invalid data, so we clamp | |
| * the resulting values so that we do not confuse | |
| * userspace. | |
| */ | |
| clamped_x = clamp(finger->x, 0U, priv->x_max); | |
| clamped_y = clamp(finger->y, 0U, priv->y_max); | |
| input_report_abs(dev, ABS_MT_POSITION_X, clamped_x); | |
| input_report_abs(dev, ABS_MT_POSITION_Y, | |
| priv->y_max - clamped_y); | |
| input_report_abs(dev, ABS_TOOL_WIDTH, state->width); | |
| } | |
| } | |
| input_mt_report_pointer_emulation(dev, true); | |
| input_report_key(dev, BTN_LEFT, state->pressed); | |
| input_sync(dev); | |
| } | |
| static void focaltech_process_touch_packet(struct psmouse *psmouse, | |
| unsigned char *packet) | |
| { | |
| struct focaltech_data *priv = psmouse->private; | |
| struct focaltech_hw_state *state = &priv->state; | |
| unsigned char fingers = packet[1]; | |
| int i; | |
| state->pressed = (packet[0] >> 4) & 1; | |
| /* the second byte contains a bitmap of all fingers touching the pad */ | |
| for (i = 0; i < FOC_MAX_FINGERS; i++) { | |
| state->fingers[i].active = fingers & 0x1; | |
| if (!state->fingers[i].active) { | |
| /* | |
| * Even when the finger becomes active again, we still | |
| * will have to wait for the first valid position. | |
| */ | |
| state->fingers[i].valid = false; | |
| } | |
| fingers >>= 1; | |
| } | |
| } | |
| static void focaltech_process_abs_packet(struct psmouse *psmouse, | |
| unsigned char *packet) | |
| { | |
| struct focaltech_data *priv = psmouse->private; | |
| struct focaltech_hw_state *state = &priv->state; | |
| unsigned int finger; | |
| finger = (packet[1] >> 4) - 1; | |
| if (finger >= FOC_MAX_FINGERS) { | |
| psmouse_err(psmouse, "Invalid finger in abs packet: %d\n", | |
| finger); | |
| return; | |
| } | |
| state->pressed = (packet[0] >> 4) & 1; | |
| state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2]; | |
| state->fingers[finger].y = (packet[3] << 8) | packet[4]; | |
| state->width = packet[5] >> 4; | |
| state->fingers[finger].valid = true; | |
| } | |
| static void focaltech_process_rel_packet(struct psmouse *psmouse, | |
| unsigned char *packet) | |
| { | |
| struct focaltech_data *priv = psmouse->private; | |
| struct focaltech_hw_state *state = &priv->state; | |
| int finger1, finger2; | |
| state->pressed = packet[0] >> 7; | |
| finger1 = ((packet[0] >> 4) & 0x7) - 1; | |
| if (finger1 < FOC_MAX_FINGERS) { | |
| state->fingers[finger1].x += (s8)packet[1]; | |
| state->fingers[finger1].y += (s8)packet[2]; | |
| } else { | |
| psmouse_err(psmouse, "First finger in rel packet invalid: %d\n", | |
| finger1); | |
| } | |
| /* | |
| * If there is an odd number of fingers, the last relative | |
| * packet only contains one finger. In this case, the second | |
| * finger index in the packet is 0 (we subtract 1 in the lines | |
| * above to create array indices, so the finger will overflow | |
| * and be above FOC_MAX_FINGERS). | |
| */ | |
| finger2 = ((packet[3] >> 4) & 0x7) - 1; | |
| if (finger2 < FOC_MAX_FINGERS) { | |
| state->fingers[finger2].x += (s8)packet[4]; | |
| state->fingers[finger2].y += (s8)packet[5]; | |
| } | |
| } | |
| static void focaltech_process_packet(struct psmouse *psmouse) | |
| { | |
| unsigned char *packet = psmouse->packet; | |
| switch (packet[0] & 0xf) { | |
| case FOC_TOUCH: | |
| focaltech_process_touch_packet(psmouse, packet); | |
| break; | |
| case FOC_ABS: | |
| focaltech_process_abs_packet(psmouse, packet); | |
| break; | |
| case FOC_REL: | |
| focaltech_process_rel_packet(psmouse, packet); | |
| break; | |
| default: | |
| psmouse_err(psmouse, "Unknown packet type: %02x\n", packet[0]); | |
| break; | |
| } | |
| focaltech_report_state(psmouse); | |
| } | |
| static psmouse_ret_t focaltech_process_byte(struct psmouse *psmouse) | |
| { | |
| if (psmouse->pktcnt >= 6) { /* Full packet received */ | |
| focaltech_process_packet(psmouse); | |
| return PSMOUSE_FULL_PACKET; | |
| } | |
| /* | |
| * We might want to do some validation of the data here, but | |
| * we do not know the protocol well enough | |
| */ | |
| return PSMOUSE_GOOD_DATA; | |
| } | |
| static int focaltech_switch_protocol(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| unsigned char param[3]; | |
| param[0] = 0; | |
| if (ps2_command(ps2dev, param, 0x10f8)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, 0x10f8)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, 0x10f8)) | |
| return -EIO; | |
| param[0] = 1; | |
| if (ps2_command(ps2dev, param, 0x10f8)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETSCALE11)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_ENABLE)) | |
| return -EIO; | |
| return 0; | |
| } | |
| static void focaltech_reset(struct psmouse *psmouse) | |
| { | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| psmouse_reset(psmouse); | |
| } | |
| static void focaltech_disconnect(struct psmouse *psmouse) | |
| { | |
| focaltech_reset(psmouse); | |
| kfree(psmouse->private); | |
| psmouse->private = NULL; | |
| } | |
| static int focaltech_reconnect(struct psmouse *psmouse) | |
| { | |
| int error; | |
| focaltech_reset(psmouse); | |
| error = focaltech_switch_protocol(psmouse); | |
| if (error) { | |
| psmouse_err(psmouse, "Unable to initialize the device\n"); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static void focaltech_set_input_params(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| struct focaltech_data *priv = psmouse->private; | |
| /* | |
| * Undo part of setup done for us by psmouse core since touchpad | |
| * is not a relative device. | |
| */ | |
| __clear_bit(EV_REL, dev->evbit); | |
| __clear_bit(REL_X, dev->relbit); | |
| __clear_bit(REL_Y, dev->relbit); | |
| __clear_bit(BTN_RIGHT, dev->keybit); | |
| __clear_bit(BTN_MIDDLE, dev->keybit); | |
| /* | |
| * Now set up our capabilities. | |
| */ | |
| __set_bit(EV_ABS, dev->evbit); | |
| input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); | |
| input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); | |
| input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); | |
| input_mt_init_slots(dev, 5, INPUT_MT_POINTER); | |
| __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); | |
| } | |
| static int focaltech_read_register(struct ps2dev *ps2dev, int reg, | |
| unsigned char *param) | |
| { | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETSCALE11)) | |
| return -EIO; | |
| param[0] = 0; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -EIO; | |
| param[0] = reg; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES)) | |
| return -EIO; | |
| if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) | |
| return -EIO; | |
| return 0; | |
| } | |
| static int focaltech_read_size(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| struct focaltech_data *priv = psmouse->private; | |
| char param[3]; | |
| if (focaltech_read_register(ps2dev, 2, param)) | |
| return -EIO; | |
| /* not sure whether this is 100% correct */ | |
| priv->x_max = (unsigned char)param[1] * 128; | |
| priv->y_max = (unsigned char)param[2] * 128; | |
| return 0; | |
| } | |
| static void focaltech_set_resolution(struct psmouse *psmouse, | |
| unsigned int resolution) | |
| { | |
| /* not supported yet */ | |
| } | |
| static void focaltech_set_rate(struct psmouse *psmouse, unsigned int rate) | |
| { | |
| /* not supported yet */ | |
| } | |
| static void focaltech_set_scale(struct psmouse *psmouse, | |
| enum psmouse_scale scale) | |
| { | |
| /* not supported yet */ | |
| } | |
| int focaltech_init(struct psmouse *psmouse) | |
| { | |
| struct focaltech_data *priv; | |
| int error; | |
| psmouse->private = priv = kzalloc(sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| focaltech_reset(psmouse); | |
| error = focaltech_read_size(psmouse); | |
| if (error) { | |
| psmouse_err(psmouse, | |
| "Unable to read the size of the touchpad\n"); | |
| goto fail; | |
| } | |
| error = focaltech_switch_protocol(psmouse); | |
| if (error) { | |
| psmouse_err(psmouse, "Unable to initialize the device\n"); | |
| goto fail; | |
| } | |
| focaltech_set_input_params(psmouse); | |
| psmouse->protocol_handler = focaltech_process_byte; | |
| psmouse->pktsize = 6; | |
| psmouse->disconnect = focaltech_disconnect; | |
| psmouse->reconnect = focaltech_reconnect; | |
| psmouse->cleanup = focaltech_reset; | |
| /* resync is not supported yet */ | |
| psmouse->resync_time = 0; | |
| /* | |
| * rate/resolution/scale changes are not supported yet, and | |
| * the generic implementations of these functions seem to | |
| * confuse some touchpads | |
| */ | |
| psmouse->set_resolution = focaltech_set_resolution; | |
| psmouse->set_rate = focaltech_set_rate; | |
| psmouse->set_scale = focaltech_set_scale; | |
| return 0; | |
| fail: | |
| focaltech_reset(psmouse); | |
| kfree(priv); | |
| return error; | |
| } | |
| #endif /* CONFIG_MOUSE_PS2_FOCALTECH */ |