| # SPDX-License-Identifier: GPL-2.0-only | |
| menu "Clock Source drivers" | |
| depends on GENERIC_CLOCKEVENTS | |
| config TIMER_OF | |
| bool | |
| select TIMER_PROBE | |
| config TIMER_ACPI | |
| bool | |
| select TIMER_PROBE | |
| config TIMER_PROBE | |
| bool | |
| config CLKSRC_I8253 | |
| bool | |
| config CLKEVT_I8253 | |
| bool | |
| config I8253_LOCK | |
| bool | |
| config OMAP_DM_SYSTIMER | |
| bool | |
| select TIMER_OF | |
| config CLKBLD_I8253 | |
| def_bool y if CLKSRC_I8253 || CLKEVT_I8253 || I8253_LOCK | |
| config CLKSRC_MMIO | |
| bool | |
| config BCM2835_TIMER | |
| bool "BCM2835 timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the BCM2835 timer driver. | |
| config BCM_KONA_TIMER | |
| bool "BCM mobile timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the BCM Kona mobile timer driver. | |
| config DAVINCI_TIMER | |
| bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST | |
| help | |
| Enables the support for the TI DaVinci timer driver. | |
| config DIGICOLOR_TIMER | |
| bool "Digicolor timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| depends on HAS_IOMEM | |
| help | |
| Enables the support for the digicolor timer driver. | |
| config OMAP_DM_TIMER | |
| bool "OMAP dual-mode timer driver" if ARCH_K3 || COMPILE_TEST | |
| default y if ARCH_K3 | |
| select TIMER_OF | |
| help | |
| Enables the support for the TI dual-mode timer driver. | |
| config DW_APB_TIMER | |
| bool "DW APB timer driver" if COMPILE_TEST | |
| help | |
| Enables the support for the dw_apb timer. | |
| config DW_APB_TIMER_OF | |
| bool | |
| select DW_APB_TIMER | |
| select TIMER_OF | |
| config FTTMR010_TIMER | |
| bool "Faraday Technology timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| select MFD_SYSCON | |
| help | |
| Enables support for the Faraday Technology timer block | |
| FTTMR010. | |
| config IXP4XX_TIMER | |
| bool "Intel XScale IXP4xx timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables support for the Intel XScale IXP4xx SoC timer. | |
| config ROCKCHIP_TIMER | |
| bool "Rockchip timer driver" if COMPILE_TEST | |
| depends on ARM || ARM64 | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the Rockchip timer driver. | |
| config ARMADA_370_XP_TIMER | |
| bool "Armada 370 and XP timer driver" if COMPILE_TEST | |
| depends on ARM | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the Armada 370 and XP timer driver. | |
| config MESON6_TIMER | |
| bool "Meson6 timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the Meson6 timer driver. | |
| config ORION_TIMER | |
| bool "Orion timer driver" if COMPILE_TEST | |
| depends on ARM | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the Orion timer driver | |
| config OWL_TIMER | |
| bool "Owl timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for the Actions Semi Owl timer driver. | |
| config RDA_TIMER | |
| bool "RDA timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables the support for the RDA Micro timer driver. | |
| config REALTEK_OTTO_TIMER | |
| bool "Clocksource/timer for the Realtek Otto platform" if COMPILE_TEST | |
| select TIMER_OF | |
| help | |
| This driver adds support for the timers found in the Realtek RTL83xx | |
| and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381 | |
| and RTL832, as well as chips from the RTL839x series, such as RTL8390 | |
| RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series | |
| such as RTL9301, RTL9302 or RTL9303. | |
| config SUN4I_TIMER | |
| bool "Sun4i timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables support for the Sun4i timer. | |
| config SUN5I_HSTIMER | |
| bool "Sun5i timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| depends on COMMON_CLK | |
| help | |
| Enables support the Sun5i timer. | |
| config TEGRA_TIMER | |
| bool "Tegra timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| depends on ARCH_TEGRA || COMPILE_TEST | |
| help | |
| Enables support for the Tegra driver. | |
| config TEGRA186_TIMER | |
| bool "NVIDIA Tegra186 timer driver" | |
| depends on ARCH_TEGRA || COMPILE_TEST | |
| depends on WATCHDOG && WATCHDOG_CORE | |
| help | |
| Enables support for the timers and watchdogs found on NVIDIA | |
| Tegra186 and later SoCs. | |
| config VT8500_TIMER | |
| bool "VT8500 timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Enables support for the VT8500 driver. | |
| config NPCM7XX_TIMER | |
| bool "NPCM7xx timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture, | |
| where TIMER0 serves as clockevent and TIMER1 serves as clocksource. | |
| config CADENCE_TTC_TIMER | |
| bool "Cadence TTC timer driver" if COMPILE_TEST | |
| depends on COMMON_CLK | |
| help | |
| Enables support for the Cadence TTC driver. | |
| config ASM9260_TIMER | |
| bool "ASM9260 timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables support for the ASM9260 timer. | |
| config CLKSRC_NOMADIK_MTU | |
| bool "Nomakdik clocksource driver" if COMPILE_TEST | |
| depends on ARM | |
| select CLKSRC_MMIO | |
| help | |
| Support for Multi Timer Unit. MTU provides access | |
| to multiple interrupt generating programmable | |
| 32-bit free running decrementing counters. | |
| config CLKSRC_DBX500_PRCMU | |
| bool "Clocksource PRCMU Timer" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Use the always on PRCMU Timer as clocksource. | |
| config CLPS711X_TIMER | |
| bool "Cirrus Logic timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables support for the Cirrus Logic PS711 timer. | |
| config MXS_TIMER | |
| bool "MXS timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| select STMP_DEVICE | |
| help | |
| Enables support for the MXS timer. | |
| config NSPIRE_TIMER | |
| bool "NSpire timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables support for the Nspire timer. | |
| config KEYSTONE_TIMER | |
| bool "Keystone timer driver" if COMPILE_TEST | |
| depends on ARM || ARM64 | |
| select CLKSRC_MMIO | |
| help | |
| Enables support for the Keystone timer. | |
| config INTEGRATOR_AP_TIMER | |
| bool "Integrator-AP timer driver" if COMPILE_TEST | |
| select CLKSRC_MMIO | |
| help | |
| Enables support for the Integrator-AP timer. | |
| config CLKSRC_LPC32XX | |
| bool "Clocksource for LPC32XX" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| depends on ARM | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Support for the LPC32XX clocksource. | |
| config CLKSRC_PISTACHIO | |
| bool "Clocksource for Pistachio SoC" | |
| depends on HAS_IOMEM | |
| depends on MIPS || COMPILE_TEST | |
| select TIMER_OF | |
| help | |
| Enables the clocksource for the Pistachio SoC. | |
| config CLKSRC_TI_32K | |
| bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK | |
| select TIMER_OF if OF | |
| help | |
| This option enables support for Texas Instruments 32.768 Hz clocksource | |
| available on many OMAP-like platforms. | |
| config CLKSRC_STM32 | |
| bool "Clocksource for STM32 SoCs" if !ARCH_STM32 | |
| depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| config CLKSRC_STM32_LP | |
| bool "Low power clocksource for STM32 SoCs" | |
| depends on MFD_STM32_LPTIMER || COMPILE_TEST | |
| config CLKSRC_MPS2 | |
| bool "Clocksource for MPS2 SoCs" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| config ARC_TIMERS | |
| bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK | |
| select TIMER_OF | |
| help | |
| These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores | |
| (ARC700 as well as ARC HS38). | |
| TIMER0 serves as clockevent while TIMER1 provides clocksource. | |
| config ARC_TIMERS_64BIT | |
| bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST | |
| depends on ARC_TIMERS | |
| select TIMER_OF | |
| help | |
| This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP). | |
| RTC is implemented inside the core, while GFRC sits outside the core in | |
| ARConnect IP block. Driver automatically picks one of them for clocksource | |
| as appropriate. | |
| config ARM_ARCH_TIMER | |
| bool | |
| select TIMER_OF if OF | |
| select TIMER_ACPI if ACPI | |
| config ARM_ARCH_TIMER_EVTSTREAM | |
| bool "Enable ARM architected timer event stream generation by default" | |
| default y if ARM_ARCH_TIMER | |
| depends on ARM_ARCH_TIMER | |
| help | |
| This option enables support by default for event stream generation | |
| based on the ARM architected timer. It is used for waking up CPUs | |
| executing the wfe instruction at a frequency represented as a | |
| power-of-2 divisor of the clock rate. The behaviour can also be | |
| overridden on the command line using the | |
| clocksource.arm_arch_timer.evtstream parameter. | |
| The main use of the event stream is wfe-based timeouts of userspace | |
| locking implementations. It might also be useful for imposing timeout | |
| on wfe to safeguard against any programming errors in case an expected | |
| event is not generated. | |
| This must be disabled for hardware validation purposes to detect any | |
| hardware anomalies of missing events. | |
| config ARM_ARCH_TIMER_OOL_WORKAROUND | |
| bool | |
| config FSL_ERRATUM_A008585 | |
| bool "Workaround for Freescale/NXP Erratum A-008585" | |
| default y | |
| depends on ARM_ARCH_TIMER && ARM64 | |
| select ARM_ARCH_TIMER_OOL_WORKAROUND | |
| help | |
| This option enables a workaround for Freescale/NXP Erratum | |
| A-008585 ("ARM generic timer may contain an erroneous | |
| value"). The workaround will only be active if the | |
| fsl,erratum-a008585 property is found in the timer node. | |
| config HISILICON_ERRATUM_161010101 | |
| bool "Workaround for Hisilicon Erratum 161010101" | |
| default y | |
| select ARM_ARCH_TIMER_OOL_WORKAROUND | |
| depends on ARM_ARCH_TIMER && ARM64 | |
| help | |
| This option enables a workaround for Hisilicon Erratum | |
| 161010101. The workaround will be active if the hisilicon,erratum-161010101 | |
| property is found in the timer node. | |
| config ARM64_ERRATUM_858921 | |
| bool "Workaround for Cortex-A73 erratum 858921" | |
| default y | |
| select ARM_ARCH_TIMER_OOL_WORKAROUND | |
| depends on ARM_ARCH_TIMER && ARM64 | |
| help | |
| This option enables a workaround applicable to Cortex-A73 | |
| (all versions), whose counter may return incorrect values. | |
| The workaround will be dynamically enabled when an affected | |
| core is detected. | |
| config SUN50I_ERRATUM_UNKNOWN1 | |
| bool "Workaround for Allwinner A64 erratum UNKNOWN1" | |
| default y | |
| depends on ARM_ARCH_TIMER && ARM64 && ARCH_SUNXI | |
| select ARM_ARCH_TIMER_OOL_WORKAROUND | |
| help | |
| This option enables a workaround for instability in the timer on | |
| the Allwinner A64 SoC. The workaround will only be active if the | |
| allwinner,erratum-unknown1 property is found in the timer node. | |
| config ARM_GLOBAL_TIMER | |
| bool "Support for the ARM global timer" if COMPILE_TEST | |
| select TIMER_OF if OF | |
| depends on ARM | |
| help | |
| This option enables support for the ARM global timer unit. | |
| config ARM_GT_INITIAL_PRESCALER_VAL | |
| int "ARM global timer initial prescaler value" | |
| default 2 if ARCH_ZYNQ | |
| default 1 | |
| depends on ARM_GLOBAL_TIMER | |
| help | |
| When the ARM global timer initializes, its current rate is declared | |
| to the kernel and maintained forever. Should its parent clock | |
| change, the driver tries to fix the timer's internal prescaler. | |
| On some machs (i.e. Zynq) the initial prescaler value thus poses | |
| bounds about how much the parent clock is allowed to decrease or | |
| increase wrt the initial clock value. | |
| This affects CPU_FREQ max delta from the initial frequency. | |
| config ARM_TIMER_SP804 | |
| bool "Support for Dual Timer SP804 module" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK && HAVE_CLK | |
| select CLKSRC_MMIO | |
| select TIMER_OF if OF | |
| config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK | |
| bool | |
| depends on ARM_GLOBAL_TIMER | |
| default y | |
| help | |
| Use ARM global timer clock source as sched_clock. | |
| config ARMV7M_SYSTICK | |
| bool "Support for the ARMv7M system time" if COMPILE_TEST | |
| select TIMER_OF if OF | |
| select CLKSRC_MMIO | |
| help | |
| This option enables support for the ARMv7M system timer unit. | |
| config ATMEL_PIT | |
| bool "Atmel PIT support" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select TIMER_OF if OF | |
| help | |
| Support for the Periodic Interval Timer found on Atmel SoCs. | |
| config ATMEL_ST | |
| bool "Atmel ST timer support" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select TIMER_OF | |
| select MFD_SYSCON | |
| help | |
| Support for the Atmel ST timer. | |
| config ATMEL_TCB_CLKSRC | |
| bool "Atmel TC Block timer driver" if COMPILE_TEST | |
| depends on ARM && HAS_IOMEM | |
| select TIMER_OF if OF | |
| help | |
| Support for Timer Counter Blocks on Atmel SoCs. | |
| config CLKSRC_EXYNOS_MCT | |
| bool "Exynos multi core timer driver" if COMPILE_TEST | |
| depends on ARM || ARM64 | |
| depends on ARCH_ARTPEC || ARCH_EXYNOS || COMPILE_TEST | |
| help | |
| Support for Multi Core Timer controller on Exynos SoCs. | |
| config CLKSRC_SAMSUNG_PWM | |
| bool "PWM timer driver for Samsung S3C, S5P" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || COMPILE_TEST | |
| help | |
| This is a new clocksource driver for the PWM timer found in | |
| Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver | |
| for all devicetree enabled platforms. This driver will be | |
| needed only on systems that do not have the Exynos MCT available. | |
| config FSL_FTM_TIMER | |
| bool "Freescale FlexTimer Module driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| help | |
| Support for Freescale FlexTimer Module (FTM) timer. | |
| config VF_PIT_TIMER | |
| bool | |
| select CLKSRC_MMIO | |
| help | |
| Support for Periodic Interrupt Timer on Freescale Vybrid Family SoCs. | |
| config SYS_SUPPORTS_SH_CMT | |
| bool | |
| config MTK_TIMER | |
| bool "Mediatek timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Support for Mediatek timer driver. | |
| config MTK_CPUX_TIMER | |
| bool "MediaTek CPUX timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| default ARCH_MEDIATEK | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Support for MediaTek CPUXGPT timer driver. | |
| config SPRD_TIMER | |
| bool "Spreadtrum timer driver" if EXPERT | |
| depends on HAS_IOMEM | |
| depends on (ARCH_SPRD || COMPILE_TEST) | |
| default ARCH_SPRD | |
| select TIMER_OF | |
| help | |
| Enables support for the Spreadtrum timer driver. | |
| config SYS_SUPPORTS_SH_MTU2 | |
| bool | |
| config SYS_SUPPORTS_SH_TMU | |
| bool | |
| config SYS_SUPPORTS_EM_STI | |
| bool | |
| config CLKSRC_JCORE_PIT | |
| bool "J-Core PIT timer driver" if COMPILE_TEST | |
| depends on OF | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| help | |
| This enables build of clocksource and clockevent driver for | |
| the integrated PIT in the J-Core synthesizable, open source SoC. | |
| config SH_TIMER_CMT | |
| bool "Renesas CMT timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| default SYS_SUPPORTS_SH_CMT | |
| help | |
| This enables build of a clocksource and clockevent driver for | |
| the Compare Match Timer (CMT) hardware available in 16/32/48-bit | |
| variants on a wide range of Mobile and Automotive SoCs from Renesas. | |
| config SH_TIMER_MTU2 | |
| bool "Renesas MTU2 timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| default SYS_SUPPORTS_SH_MTU2 | |
| help | |
| This enables build of a clockevent driver for the Multi-Function | |
| Timer Pulse Unit 2 (MTU2) hardware available on SoCs from Renesas. | |
| This hardware comes with 16-bit timer registers. | |
| config RENESAS_OSTM | |
| bool "Renesas OSTM timer driver" | |
| depends on ARCH_RENESAS || COMPILE_TEST | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables the support for the Renesas OSTM. | |
| config SH_TIMER_TMU | |
| bool "Renesas TMU timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| default SYS_SUPPORTS_SH_TMU | |
| help | |
| This enables build of a clocksource and clockevent driver for | |
| the 32-bit Timer Unit (TMU) hardware available on a wide range | |
| SoCs from Renesas. | |
| config EM_TIMER_STI | |
| bool "Renesas STI timer driver" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| default SYS_SUPPORTS_EM_STI | |
| help | |
| This enables build of a clocksource and clockevent driver for | |
| the 48-bit System Timer (STI) hardware available on a SoCs | |
| such as EMEV2 from former NEC Electronics. | |
| config CLKSRC_QCOM | |
| bool "Qualcomm MSM timer" if COMPILE_TEST | |
| depends on ARM | |
| select TIMER_OF | |
| help | |
| This enables the clocksource and the per CPU clockevent driver for the | |
| Qualcomm SoCs. | |
| config CLKSRC_VERSATILE | |
| bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK | |
| select TIMER_OF | |
| default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM | |
| help | |
| This option enables clock source based on free running | |
| counter available in the "System Registers" block of | |
| ARM Versatile and Versatile Express reference platforms. | |
| config CLKSRC_MIPS_GIC | |
| bool | |
| depends on MIPS_GIC | |
| select CLOCKSOURCE_WATCHDOG | |
| select TIMER_OF | |
| config CLKSRC_PXA | |
| bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| help | |
| This enables OST0 support available on PXA and SA-11x0 | |
| platforms. | |
| config CLKSRC_IMX_GPT | |
| bool "Clocksource using i.MX GPT" if COMPILE_TEST | |
| depends on (ARM || ARM64) && HAVE_CLK | |
| select CLKSRC_MMIO | |
| config CLKSRC_IMX_TPM | |
| bool "Clocksource using i.MX TPM" if COMPILE_TEST | |
| depends on (ARM || ARM64) && HAVE_CLK | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enable this option to use IMX Timer/PWM Module (TPM) timer as | |
| clocksource. | |
| config TIMER_IMX_SYS_CTR | |
| bool "i.MX system counter timer" if COMPILE_TEST | |
| select TIMER_OF | |
| help | |
| Enable this option to use i.MX system counter timer as a | |
| clockevent. | |
| config CLKSRC_LOONGSON1_PWM | |
| bool "Clocksource using Loongson1 PWM" | |
| depends on MACH_LOONGSON32 || COMPILE_TEST | |
| select MIPS_EXTERNAL_TIMER | |
| select TIMER_OF | |
| help | |
| Enable this option to use Loongson1 PWM timer as clocksource | |
| instead of the performance counter. | |
| config CLKSRC_ST_LPC | |
| bool "Low power clocksource found in the LPC" if COMPILE_TEST | |
| select TIMER_OF if OF | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| help | |
| Enable this option to use the Low Power controller timer | |
| as clocksource. | |
| config GXP_TIMER | |
| bool "GXP timer driver" if COMPILE_TEST && !ARCH_HPE | |
| default ARCH_HPE | |
| select TIMER_OF if OF | |
| help | |
| Provides a driver for the timer control found on HPE | |
| GXP SOCs. This is required for all GXP SOCs. | |
| config RISCV_TIMER | |
| bool "Timer for the RISC-V platform" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI | |
| select TIMER_PROBE | |
| select TIMER_OF | |
| help | |
| This enables the per-hart timer built into all RISC-V systems, which | |
| is accessed via both the SBI and the rdcycle instruction. This is | |
| required for all RISC-V systems. | |
| config CLINT_TIMER | |
| bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST | |
| depends on GENERIC_SCHED_CLOCK && RISCV | |
| select TIMER_PROBE | |
| select TIMER_OF | |
| help | |
| This option enables the CLINT timer for RISC-V systems. The CLINT | |
| driver is usually used for NoMMU RISC-V systems. | |
| config CSKY_MP_TIMER | |
| bool "SMP Timer for the C-SKY platform" if COMPILE_TEST | |
| depends on CSKY | |
| select TIMER_OF | |
| help | |
| Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP | |
| system. | |
| csky,mptimer is not only used in SMP system, it also could be used in | |
| single core system. It's not a mmio reg and it uses mtcr/mfcr instruction. | |
| config GX6605S_TIMER | |
| bool "Gx6605s SOC system timer driver" if COMPILE_TEST | |
| depends on CSKY | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| This option enables support for gx6605s SOC's timer. | |
| config MILBEAUT_TIMER | |
| bool "Milbeaut timer driver" if COMPILE_TEST | |
| depends on OF | |
| depends on ARM | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enables the support for Milbeaut timer driver. | |
| config MSC313E_TIMER | |
| bool "MSC313E timer driver" if COMPILE_TEST | |
| select TIMER_OF | |
| select CLKSRC_MMIO | |
| help | |
| Enables support for the MStar MSC313E timer driver. | |
| This provides access to multiple interrupt generating | |
| programmable 32-bit free running incrementing counters. | |
| config INGENIC_TIMER | |
| bool "Clocksource/timer using the TCU in Ingenic JZ SoCs" | |
| default MACH_INGENIC | |
| depends on MIPS || COMPILE_TEST | |
| depends on COMMON_CLK | |
| select MFD_SYSCON | |
| select TIMER_OF | |
| select IRQ_DOMAIN | |
| help | |
| Support for the timer/counter unit of the Ingenic JZ SoCs. | |
| config INGENIC_SYSOST | |
| bool "Clocksource/timer using the SYSOST in Ingenic X SoCs" | |
| depends on MIPS || COMPILE_TEST | |
| depends on COMMON_CLK | |
| select MFD_SYSCON | |
| select TIMER_OF | |
| select IRQ_DOMAIN | |
| help | |
| Support for the SYSOST of the Ingenic X Series SoCs. | |
| config INGENIC_OST | |
| bool "Clocksource using the OST in Ingenic JZ SoCs" | |
| depends on MIPS || COMPILE_TEST | |
| depends on COMMON_CLK | |
| select MFD_SYSCON | |
| help | |
| Support for the Operating System Timer of the Ingenic JZ SoCs. | |
| config MICROCHIP_PIT64B | |
| bool "Microchip PIT64B support" | |
| depends on OF && ARM | |
| select TIMER_OF | |
| help | |
| This option enables Microchip PIT64B timer for Atmel | |
| based system. It supports the oneshot, the periodic | |
| modes and high resolution. It is used as a clocksource | |
| and a clockevent. | |
| config GOLDFISH_TIMER | |
| bool "Clocksource using goldfish-rtc" | |
| depends on M68K || COMPILE_TEST | |
| depends on RTC_DRV_GOLDFISH | |
| help | |
| Support for the timer/counter of goldfish-rtc | |
| config EP93XX_TIMER | |
| bool "Cirrus Logic ep93xx timer driver" if COMPILE_TEST | |
| depends on ARCH_EP93XX | |
| depends on GENERIC_CLOCKEVENTS | |
| depends on HAS_IOMEM | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| help | |
| Enables support for the Cirrus Logic timer block | |
| EP93XX. | |
| endmenu |