| // SPDX-License-Identifier: GPL-2.0+ | |
| /* * CAAM control-plane driver backend | |
| * Controller-level driver, kernel property detection, initialization | |
| * | |
| * Copyright 2008-2012 Freescale Semiconductor, Inc. | |
| * Copyright 2018-2019, 2023 NXP | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sys_soc.h> | |
| #include <linux/fsl/mc.h> | |
| #include "compat.h" | |
| #include "debugfs.h" | |
| #include "regs.h" | |
| #include "intern.h" | |
| #include "jr.h" | |
| #include "desc_constr.h" | |
| #include "ctrl.h" | |
| bool caam_dpaa2; | |
| EXPORT_SYMBOL(caam_dpaa2); | |
| #ifdef CONFIG_CAAM_QI | |
| #include "qi.h" | |
| #endif | |
| /* | |
| * Descriptor to instantiate RNG State Handle 0 in normal mode and | |
| * load the JDKEK, TDKEK and TDSK registers | |
| */ | |
| static void build_instantiation_desc(u32 *desc, int handle, int do_sk) | |
| { | |
| u32 *jump_cmd, op_flags; | |
| init_job_desc(desc, 0); | |
| op_flags = OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | | |
| (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INIT | | |
| OP_ALG_PR_ON; | |
| /* INIT RNG in non-test mode */ | |
| append_operation(desc, op_flags); | |
| if (!handle && do_sk) { | |
| /* | |
| * For SH0, Secure Keys must be generated as well | |
| */ | |
| /* wait for done */ | |
| jump_cmd = append_jump(desc, JUMP_CLASS_CLASS1); | |
| set_jump_tgt_here(desc, jump_cmd); | |
| /* | |
| * load 1 to clear written reg: | |
| * resets the done interrupt and returns the RNG to idle. | |
| */ | |
| append_load_imm_u32(desc, 1, LDST_SRCDST_WORD_CLRW); | |
| /* Initialize State Handle */ | |
| append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | | |
| OP_ALG_AAI_RNG4_SK); | |
| } | |
| append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); | |
| } | |
| /* Descriptor for deinstantiation of State Handle 0 of the RNG block. */ | |
| static void build_deinstantiation_desc(u32 *desc, int handle) | |
| { | |
| init_job_desc(desc, 0); | |
| /* Uninstantiate State Handle 0 */ | |
| append_operation(desc, OP_TYPE_CLASS1_ALG | OP_ALG_ALGSEL_RNG | | |
| (handle << OP_ALG_AAI_SHIFT) | OP_ALG_AS_INITFINAL); | |
| append_jump(desc, JUMP_CLASS_CLASS1 | JUMP_TYPE_HALT); | |
| } | |
| static const struct of_device_id imx8m_machine_match[] = { | |
| { .compatible = "fsl,imx8mm", }, | |
| { .compatible = "fsl,imx8mn", }, | |
| { .compatible = "fsl,imx8mp", }, | |
| { .compatible = "fsl,imx8mq", }, | |
| { .compatible = "fsl,imx8ulp", }, | |
| { } | |
| }; | |
| /* | |
| * run_descriptor_deco0 - runs a descriptor on DECO0, under direct control of | |
| * the software (no JR/QI used). | |
| * @ctrldev - pointer to device | |
| * @status - descriptor status, after being run | |
| * | |
| * Return: - 0 if no error occurred | |
| * - -ENODEV if the DECO couldn't be acquired | |
| * - -EAGAIN if an error occurred while executing the descriptor | |
| */ | |
| static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc, | |
| u32 *status) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); | |
| struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl; | |
| struct caam_deco __iomem *deco = ctrlpriv->deco; | |
| unsigned int timeout = 100000; | |
| u32 deco_dbg_reg, deco_state, flags; | |
| int i; | |
| if (ctrlpriv->virt_en == 1 || | |
| /* | |
| * Apparently on i.MX8M{Q,M,N,P} it doesn't matter if virt_en == 1 | |
| * and the following steps should be performed regardless | |
| */ | |
| of_match_node(imx8m_machine_match, of_root)) { | |
| clrsetbits_32(&ctrl->deco_rsr, 0, DECORSR_JR0); | |
| while (!(rd_reg32(&ctrl->deco_rsr) & DECORSR_VALID) && | |
| --timeout) | |
| cpu_relax(); | |
| timeout = 100000; | |
| } | |
| clrsetbits_32(&ctrl->deco_rq, 0, DECORR_RQD0ENABLE); | |
| while (!(rd_reg32(&ctrl->deco_rq) & DECORR_DEN0) && | |
| --timeout) | |
| cpu_relax(); | |
| if (!timeout) { | |
| dev_err(ctrldev, "failed to acquire DECO 0\n"); | |
| clrsetbits_32(&ctrl->deco_rq, DECORR_RQD0ENABLE, 0); | |
| return -ENODEV; | |
| } | |
| for (i = 0; i < desc_len(desc); i++) | |
| wr_reg32(&deco->descbuf[i], caam32_to_cpu(*(desc + i))); | |
| flags = DECO_JQCR_WHL; | |
| /* | |
| * If the descriptor length is longer than 4 words, then the | |
| * FOUR bit in JRCTRL register must be set. | |
| */ | |
| if (desc_len(desc) >= 4) | |
| flags |= DECO_JQCR_FOUR; | |
| /* Instruct the DECO to execute it */ | |
| clrsetbits_32(&deco->jr_ctl_hi, 0, flags); | |
| timeout = 10000000; | |
| do { | |
| deco_dbg_reg = rd_reg32(&deco->desc_dbg); | |
| if (ctrlpriv->era < 10) | |
| deco_state = (deco_dbg_reg & DESC_DBG_DECO_STAT_MASK) >> | |
| DESC_DBG_DECO_STAT_SHIFT; | |
| else | |
| deco_state = (rd_reg32(&deco->dbg_exec) & | |
| DESC_DER_DECO_STAT_MASK) >> | |
| DESC_DER_DECO_STAT_SHIFT; | |
| /* | |
| * If an error occurred in the descriptor, then | |
| * the DECO status field will be set to 0x0D | |
| */ | |
| if (deco_state == DECO_STAT_HOST_ERR) | |
| break; | |
| cpu_relax(); | |
| } while ((deco_dbg_reg & DESC_DBG_DECO_STAT_VALID) && --timeout); | |
| *status = rd_reg32(&deco->op_status_hi) & | |
| DECO_OP_STATUS_HI_ERR_MASK; | |
| if (ctrlpriv->virt_en == 1) | |
| clrsetbits_32(&ctrl->deco_rsr, DECORSR_JR0, 0); | |
| /* Mark the DECO as free */ | |
| clrsetbits_32(&ctrl->deco_rq, DECORR_RQD0ENABLE, 0); | |
| if (!timeout) | |
| return -EAGAIN; | |
| return 0; | |
| } | |
| /* | |
| * deinstantiate_rng - builds and executes a descriptor on DECO0, | |
| * which deinitializes the RNG block. | |
| * @ctrldev - pointer to device | |
| * @state_handle_mask - bitmask containing the instantiation status | |
| * for the RNG4 state handles which exist in | |
| * the RNG4 block: 1 if it's been instantiated | |
| * | |
| * Return: - 0 if no error occurred | |
| * - -ENOMEM if there isn't enough memory to allocate the descriptor | |
| * - -ENODEV if DECO0 couldn't be acquired | |
| * - -EAGAIN if an error occurred when executing the descriptor | |
| */ | |
| static int deinstantiate_rng(struct device *ctrldev, int state_handle_mask) | |
| { | |
| u32 *desc, status; | |
| int sh_idx, ret = 0; | |
| desc = kmalloc(CAAM_CMD_SZ * 3, GFP_KERNEL); | |
| if (!desc) | |
| return -ENOMEM; | |
| for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) { | |
| /* | |
| * If the corresponding bit is set, then it means the state | |
| * handle was initialized by us, and thus it needs to be | |
| * deinitialized as well | |
| */ | |
| if ((1 << sh_idx) & state_handle_mask) { | |
| /* | |
| * Create the descriptor for deinstantating this state | |
| * handle | |
| */ | |
| build_deinstantiation_desc(desc, sh_idx); | |
| /* Try to run it through DECO0 */ | |
| ret = run_descriptor_deco0(ctrldev, desc, &status); | |
| if (ret || | |
| (status && status != JRSTA_SSRC_JUMP_HALT_CC)) { | |
| dev_err(ctrldev, | |
| "Failed to deinstantiate RNG4 SH%d\n", | |
| sh_idx); | |
| break; | |
| } | |
| dev_info(ctrldev, "Deinstantiated RNG4 SH%d\n", sh_idx); | |
| } | |
| } | |
| kfree(desc); | |
| return ret; | |
| } | |
| static void devm_deinstantiate_rng(void *data) | |
| { | |
| struct device *ctrldev = data; | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); | |
| /* | |
| * De-initialize RNG state handles initialized by this driver. | |
| * In case of SoCs with Management Complex, RNG is managed by MC f/w. | |
| */ | |
| if (ctrlpriv->rng4_sh_init) | |
| deinstantiate_rng(ctrldev, ctrlpriv->rng4_sh_init); | |
| } | |
| /* | |
| * instantiate_rng - builds and executes a descriptor on DECO0, | |
| * which initializes the RNG block. | |
| * @ctrldev - pointer to device | |
| * @state_handle_mask - bitmask containing the instantiation status | |
| * for the RNG4 state handles which exist in | |
| * the RNG4 block: 1 if it's been instantiated | |
| * by an external entry, 0 otherwise. | |
| * @gen_sk - generate data to be loaded into the JDKEK, TDKEK and TDSK; | |
| * Caution: this can be done only once; if the keys need to be | |
| * regenerated, a POR is required | |
| * | |
| * Return: - 0 if no error occurred | |
| * - -ENOMEM if there isn't enough memory to allocate the descriptor | |
| * - -ENODEV if DECO0 couldn't be acquired | |
| * - -EAGAIN if an error occurred when executing the descriptor | |
| * f.i. there was a RNG hardware error due to not "good enough" | |
| * entropy being acquired. | |
| */ | |
| static int instantiate_rng(struct device *ctrldev, int state_handle_mask, | |
| int gen_sk) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(ctrldev); | |
| struct caam_ctrl __iomem *ctrl; | |
| u32 *desc, status = 0, rdsta_val; | |
| int ret = 0, sh_idx; | |
| ctrl = (struct caam_ctrl __iomem *)ctrlpriv->ctrl; | |
| desc = kmalloc(CAAM_CMD_SZ * 7, GFP_KERNEL); | |
| if (!desc) | |
| return -ENOMEM; | |
| for (sh_idx = 0; sh_idx < RNG4_MAX_HANDLES; sh_idx++) { | |
| const u32 rdsta_if = RDSTA_IF0 << sh_idx; | |
| const u32 rdsta_pr = RDSTA_PR0 << sh_idx; | |
| const u32 rdsta_mask = rdsta_if | rdsta_pr; | |
| /* Clear the contents before using the descriptor */ | |
| memset(desc, 0x00, CAAM_CMD_SZ * 7); | |
| /* | |
| * If the corresponding bit is set, this state handle | |
| * was initialized by somebody else, so it's left alone. | |
| */ | |
| if (rdsta_if & state_handle_mask) { | |
| if (rdsta_pr & state_handle_mask) | |
| continue; | |
| dev_info(ctrldev, | |
| "RNG4 SH%d was previously instantiated without prediction resistance. Tearing it down\n", | |
| sh_idx); | |
| ret = deinstantiate_rng(ctrldev, rdsta_if); | |
| if (ret) | |
| break; | |
| } | |
| /* Create the descriptor for instantiating RNG State Handle */ | |
| build_instantiation_desc(desc, sh_idx, gen_sk); | |
| /* Try to run it through DECO0 */ | |
| ret = run_descriptor_deco0(ctrldev, desc, &status); | |
| /* | |
| * If ret is not 0, or descriptor status is not 0, then | |
| * something went wrong. No need to try the next state | |
| * handle (if available), bail out here. | |
| * Also, if for some reason, the State Handle didn't get | |
| * instantiated although the descriptor has finished | |
| * without any error (HW optimizations for later | |
| * CAAM eras), then try again. | |
| */ | |
| if (ret) | |
| break; | |
| rdsta_val = rd_reg32(&ctrl->r4tst[0].rdsta) & RDSTA_MASK; | |
| if ((status && status != JRSTA_SSRC_JUMP_HALT_CC) || | |
| (rdsta_val & rdsta_mask) != rdsta_mask) { | |
| ret = -EAGAIN; | |
| break; | |
| } | |
| dev_info(ctrldev, "Instantiated RNG4 SH%d\n", sh_idx); | |
| } | |
| kfree(desc); | |
| if (ret) | |
| return ret; | |
| return devm_add_action_or_reset(ctrldev, devm_deinstantiate_rng, ctrldev); | |
| } | |
| /* | |
| * kick_trng - sets the various parameters for enabling the initialization | |
| * of the RNG4 block in CAAM | |
| * @dev - pointer to the controller device | |
| * @ent_delay - Defines the length (in system clocks) of each entropy sample. | |
| */ | |
| static void kick_trng(struct device *dev, int ent_delay) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| struct caam_ctrl __iomem *ctrl; | |
| struct rng4tst __iomem *r4tst; | |
| u32 val, rtsdctl; | |
| ctrl = (struct caam_ctrl __iomem *)ctrlpriv->ctrl; | |
| r4tst = &ctrl->r4tst[0]; | |
| /* | |
| * Setting both RTMCTL:PRGM and RTMCTL:TRNG_ACC causes TRNG to | |
| * properly invalidate the entropy in the entropy register and | |
| * force re-generation. | |
| */ | |
| clrsetbits_32(&r4tst->rtmctl, 0, RTMCTL_PRGM | RTMCTL_ACC); | |
| /* | |
| * Performance-wise, it does not make sense to | |
| * set the delay to a value that is lower | |
| * than the last one that worked (i.e. the state handles | |
| * were instantiated properly). | |
| */ | |
| rtsdctl = rd_reg32(&r4tst->rtsdctl); | |
| val = (rtsdctl & RTSDCTL_ENT_DLY_MASK) >> RTSDCTL_ENT_DLY_SHIFT; | |
| if (ent_delay > val) { | |
| val = ent_delay; | |
| /* min. freq. count, equal to 1/4 of the entropy sample length */ | |
| wr_reg32(&r4tst->rtfrqmin, val >> 2); | |
| /* disable maximum frequency count */ | |
| wr_reg32(&r4tst->rtfrqmax, RTFRQMAX_DISABLE); | |
| } | |
| wr_reg32(&r4tst->rtsdctl, (val << RTSDCTL_ENT_DLY_SHIFT) | | |
| RTSDCTL_SAMP_SIZE_VAL); | |
| /* | |
| * To avoid reprogramming the self-test parameters over and over again, | |
| * use RTSDCTL[SAMP_SIZE] as an indicator. | |
| */ | |
| if ((rtsdctl & RTSDCTL_SAMP_SIZE_MASK) != RTSDCTL_SAMP_SIZE_VAL) { | |
| wr_reg32(&r4tst->rtscmisc, (2 << 16) | 32); | |
| wr_reg32(&r4tst->rtpkrrng, 570); | |
| wr_reg32(&r4tst->rtpkrmax, 1600); | |
| wr_reg32(&r4tst->rtscml, (122 << 16) | 317); | |
| wr_reg32(&r4tst->rtscrl[0], (80 << 16) | 107); | |
| wr_reg32(&r4tst->rtscrl[1], (57 << 16) | 62); | |
| wr_reg32(&r4tst->rtscrl[2], (39 << 16) | 39); | |
| wr_reg32(&r4tst->rtscrl[3], (27 << 16) | 26); | |
| wr_reg32(&r4tst->rtscrl[4], (19 << 16) | 18); | |
| wr_reg32(&r4tst->rtscrl[5], (18 << 16) | 17); | |
| } | |
| /* | |
| * select raw sampling in both entropy shifter | |
| * and statistical checker; ; put RNG4 into run mode | |
| */ | |
| clrsetbits_32(&r4tst->rtmctl, RTMCTL_PRGM | RTMCTL_ACC, | |
| RTMCTL_SAMP_MODE_RAW_ES_SC); | |
| } | |
| static int caam_get_era_from_hw(struct caam_perfmon __iomem *perfmon) | |
| { | |
| static const struct { | |
| u16 ip_id; | |
| u8 maj_rev; | |
| u8 era; | |
| } id[] = { | |
| {0x0A10, 1, 1}, | |
| {0x0A10, 2, 2}, | |
| {0x0A12, 1, 3}, | |
| {0x0A14, 1, 3}, | |
| {0x0A14, 2, 4}, | |
| {0x0A16, 1, 4}, | |
| {0x0A10, 3, 4}, | |
| {0x0A11, 1, 4}, | |
| {0x0A18, 1, 4}, | |
| {0x0A11, 2, 5}, | |
| {0x0A12, 2, 5}, | |
| {0x0A13, 1, 5}, | |
| {0x0A1C, 1, 5} | |
| }; | |
| u32 ccbvid, id_ms; | |
| u8 maj_rev, era; | |
| u16 ip_id; | |
| int i; | |
| ccbvid = rd_reg32(&perfmon->ccb_id); | |
| era = (ccbvid & CCBVID_ERA_MASK) >> CCBVID_ERA_SHIFT; | |
| if (era) /* This is '0' prior to CAAM ERA-6 */ | |
| return era; | |
| id_ms = rd_reg32(&perfmon->caam_id_ms); | |
| ip_id = (id_ms & SECVID_MS_IPID_MASK) >> SECVID_MS_IPID_SHIFT; | |
| maj_rev = (id_ms & SECVID_MS_MAJ_REV_MASK) >> SECVID_MS_MAJ_REV_SHIFT; | |
| for (i = 0; i < ARRAY_SIZE(id); i++) | |
| if (id[i].ip_id == ip_id && id[i].maj_rev == maj_rev) | |
| return id[i].era; | |
| return -ENOTSUPP; | |
| } | |
| /** | |
| * caam_get_era() - Return the ERA of the SEC on SoC, based | |
| * on "sec-era" optional property in the DTS. This property is updated | |
| * by u-boot. | |
| * In case this property is not passed an attempt to retrieve the CAAM | |
| * era via register reads will be made. | |
| * | |
| * @perfmon: Performance Monitor Registers | |
| */ | |
| static int caam_get_era(struct caam_perfmon __iomem *perfmon) | |
| { | |
| struct device_node *caam_node; | |
| int ret; | |
| u32 prop; | |
| caam_node = of_find_compatible_node(NULL, NULL, "fsl,sec-v4.0"); | |
| ret = of_property_read_u32(caam_node, "fsl,sec-era", &prop); | |
| of_node_put(caam_node); | |
| if (!ret) | |
| return prop; | |
| else | |
| return caam_get_era_from_hw(perfmon); | |
| } | |
| /* | |
| * ERRATA: imx6 devices (imx6D, imx6Q, imx6DL, imx6S, imx6DP and imx6QP) | |
| * have an issue wherein AXI bus transactions may not occur in the correct | |
| * order. This isn't a problem running single descriptors, but can be if | |
| * running multiple concurrent descriptors. Reworking the driver to throttle | |
| * to single requests is impractical, thus the workaround is to limit the AXI | |
| * pipeline to a depth of 1 (from it's default of 4) to preclude this situation | |
| * from occurring. | |
| */ | |
| static void handle_imx6_err005766(u32 __iomem *mcr) | |
| { | |
| if (of_machine_is_compatible("fsl,imx6q") || | |
| of_machine_is_compatible("fsl,imx6dl") || | |
| of_machine_is_compatible("fsl,imx6qp")) | |
| clrsetbits_32(mcr, MCFGR_AXIPIPE_MASK, | |
| 1 << MCFGR_AXIPIPE_SHIFT); | |
| } | |
| static const struct of_device_id caam_match[] = { | |
| { | |
| .compatible = "fsl,sec-v4.0", | |
| }, | |
| { | |
| .compatible = "fsl,sec4.0", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, caam_match); | |
| struct caam_imx_data { | |
| const struct clk_bulk_data *clks; | |
| int num_clks; | |
| }; | |
| static const struct clk_bulk_data caam_imx6_clks[] = { | |
| { .id = "ipg" }, | |
| { .id = "mem" }, | |
| { .id = "aclk" }, | |
| { .id = "emi_slow" }, | |
| }; | |
| static const struct caam_imx_data caam_imx6_data = { | |
| .clks = caam_imx6_clks, | |
| .num_clks = ARRAY_SIZE(caam_imx6_clks), | |
| }; | |
| static const struct clk_bulk_data caam_imx7_clks[] = { | |
| { .id = "ipg" }, | |
| { .id = "aclk" }, | |
| }; | |
| static const struct caam_imx_data caam_imx7_data = { | |
| .clks = caam_imx7_clks, | |
| .num_clks = ARRAY_SIZE(caam_imx7_clks), | |
| }; | |
| static const struct clk_bulk_data caam_imx6ul_clks[] = { | |
| { .id = "ipg" }, | |
| { .id = "mem" }, | |
| { .id = "aclk" }, | |
| }; | |
| static const struct caam_imx_data caam_imx6ul_data = { | |
| .clks = caam_imx6ul_clks, | |
| .num_clks = ARRAY_SIZE(caam_imx6ul_clks), | |
| }; | |
| static const struct clk_bulk_data caam_vf610_clks[] = { | |
| { .id = "ipg" }, | |
| }; | |
| static const struct caam_imx_data caam_vf610_data = { | |
| .clks = caam_vf610_clks, | |
| .num_clks = ARRAY_SIZE(caam_vf610_clks), | |
| }; | |
| static const struct soc_device_attribute caam_imx_soc_table[] = { | |
| { .soc_id = "i.MX6UL", .data = &caam_imx6ul_data }, | |
| { .soc_id = "i.MX6*", .data = &caam_imx6_data }, | |
| { .soc_id = "i.MX7*", .data = &caam_imx7_data }, | |
| { .soc_id = "i.MX8M*", .data = &caam_imx7_data }, | |
| { .soc_id = "VF*", .data = &caam_vf610_data }, | |
| { .family = "Freescale i.MX" }, | |
| { /* sentinel */ } | |
| }; | |
| static void disable_clocks(void *data) | |
| { | |
| struct caam_drv_private *ctrlpriv = data; | |
| clk_bulk_disable_unprepare(ctrlpriv->num_clks, ctrlpriv->clks); | |
| } | |
| static int init_clocks(struct device *dev, const struct caam_imx_data *data) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| int ret; | |
| ctrlpriv->num_clks = data->num_clks; | |
| ctrlpriv->clks = devm_kmemdup(dev, data->clks, | |
| data->num_clks * sizeof(data->clks[0]), | |
| GFP_KERNEL); | |
| if (!ctrlpriv->clks) | |
| return -ENOMEM; | |
| ret = devm_clk_bulk_get(dev, ctrlpriv->num_clks, ctrlpriv->clks); | |
| if (ret) { | |
| dev_err(dev, | |
| "Failed to request all necessary clocks\n"); | |
| return ret; | |
| } | |
| ret = clk_bulk_prepare_enable(ctrlpriv->num_clks, ctrlpriv->clks); | |
| if (ret) { | |
| dev_err(dev, | |
| "Failed to prepare/enable all necessary clocks\n"); | |
| return ret; | |
| } | |
| return devm_add_action_or_reset(dev, disable_clocks, ctrlpriv); | |
| } | |
| static void caam_remove_debugfs(void *root) | |
| { | |
| debugfs_remove_recursive(root); | |
| } | |
| #ifdef CONFIG_FSL_MC_BUS | |
| static bool check_version(struct fsl_mc_version *mc_version, u32 major, | |
| u32 minor, u32 revision) | |
| { | |
| if (mc_version->major > major) | |
| return true; | |
| if (mc_version->major == major) { | |
| if (mc_version->minor > minor) | |
| return true; | |
| if (mc_version->minor == minor && | |
| mc_version->revision > revision) | |
| return true; | |
| } | |
| return false; | |
| } | |
| #endif | |
| static bool needs_entropy_delay_adjustment(void) | |
| { | |
| if (of_machine_is_compatible("fsl,imx6sx")) | |
| return true; | |
| return false; | |
| } | |
| static int caam_ctrl_rng_init(struct device *dev) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl; | |
| int ret, gen_sk, ent_delay = RTSDCTL_ENT_DLY_MIN; | |
| u8 rng_vid; | |
| if (ctrlpriv->era < 10) { | |
| struct caam_perfmon __iomem *perfmon; | |
| perfmon = ctrlpriv->total_jobrs ? | |
| (struct caam_perfmon __iomem *)&ctrlpriv->jr[0]->perfmon : | |
| (struct caam_perfmon __iomem *)&ctrl->perfmon; | |
| rng_vid = (rd_reg32(&perfmon->cha_id_ls) & | |
| CHA_ID_LS_RNG_MASK) >> CHA_ID_LS_RNG_SHIFT; | |
| } else { | |
| struct version_regs __iomem *vreg; | |
| vreg = ctrlpriv->total_jobrs ? | |
| (struct version_regs __iomem *)&ctrlpriv->jr[0]->vreg : | |
| (struct version_regs __iomem *)&ctrl->vreg; | |
| rng_vid = (rd_reg32(&vreg->rng) & CHA_VER_VID_MASK) >> | |
| CHA_VER_VID_SHIFT; | |
| } | |
| /* | |
| * If SEC has RNG version >= 4 and RNG state handle has not been | |
| * already instantiated, do RNG instantiation | |
| * In case of SoCs with Management Complex, RNG is managed by MC f/w. | |
| */ | |
| if (!(ctrlpriv->mc_en && ctrlpriv->pr_support) && rng_vid >= 4) { | |
| ctrlpriv->rng4_sh_init = | |
| rd_reg32(&ctrl->r4tst[0].rdsta); | |
| /* | |
| * If the secure keys (TDKEK, JDKEK, TDSK), were already | |
| * generated, signal this to the function that is instantiating | |
| * the state handles. An error would occur if RNG4 attempts | |
| * to regenerate these keys before the next POR. | |
| */ | |
| gen_sk = ctrlpriv->rng4_sh_init & RDSTA_SKVN ? 0 : 1; | |
| ctrlpriv->rng4_sh_init &= RDSTA_MASK; | |
| do { | |
| int inst_handles = | |
| rd_reg32(&ctrl->r4tst[0].rdsta) & RDSTA_MASK; | |
| /* | |
| * If either SH were instantiated by somebody else | |
| * (e.g. u-boot) then it is assumed that the entropy | |
| * parameters are properly set and thus the function | |
| * setting these (kick_trng(...)) is skipped. | |
| * Also, if a handle was instantiated, do not change | |
| * the TRNG parameters. | |
| */ | |
| if (needs_entropy_delay_adjustment()) | |
| ent_delay = 12000; | |
| if (!(ctrlpriv->rng4_sh_init || inst_handles)) { | |
| dev_info(dev, | |
| "Entropy delay = %u\n", | |
| ent_delay); | |
| kick_trng(dev, ent_delay); | |
| ent_delay += 400; | |
| } | |
| /* | |
| * if instantiate_rng(...) fails, the loop will rerun | |
| * and the kick_trng(...) function will modify the | |
| * upper and lower limits of the entropy sampling | |
| * interval, leading to a successful initialization of | |
| * the RNG. | |
| */ | |
| ret = instantiate_rng(dev, inst_handles, | |
| gen_sk); | |
| /* | |
| * Entropy delay is determined via TRNG characterization. | |
| * TRNG characterization is run across different voltages | |
| * and temperatures. | |
| * If worst case value for ent_dly is identified, | |
| * the loop can be skipped for that platform. | |
| */ | |
| if (needs_entropy_delay_adjustment()) | |
| break; | |
| if (ret == -EAGAIN) | |
| /* | |
| * if here, the loop will rerun, | |
| * so don't hog the CPU | |
| */ | |
| cpu_relax(); | |
| } while ((ret == -EAGAIN) && (ent_delay < RTSDCTL_ENT_DLY_MAX)); | |
| if (ret) { | |
| dev_err(dev, "failed to instantiate RNG"); | |
| return ret; | |
| } | |
| /* | |
| * Set handles initialized by this module as the complement of | |
| * the already initialized ones | |
| */ | |
| ctrlpriv->rng4_sh_init = ~ctrlpriv->rng4_sh_init & RDSTA_MASK; | |
| /* Enable RDB bit so that RNG works faster */ | |
| clrsetbits_32(&ctrl->scfgr, 0, SCFGR_RDBENABLE); | |
| } | |
| return 0; | |
| } | |
| /* Indicate if the internal state of the CAAM is lost during PM */ | |
| static int caam_off_during_pm(void) | |
| { | |
| bool not_off_during_pm = of_machine_is_compatible("fsl,imx6q") || | |
| of_machine_is_compatible("fsl,imx6qp") || | |
| of_machine_is_compatible("fsl,imx6dl"); | |
| return not_off_during_pm ? 0 : 1; | |
| } | |
| static void caam_state_save(struct device *dev) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| struct caam_ctl_state *state = &ctrlpriv->state; | |
| struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl; | |
| u32 deco_inst, jr_inst; | |
| int i; | |
| state->mcr = rd_reg32(&ctrl->mcr); | |
| state->scfgr = rd_reg32(&ctrl->scfgr); | |
| deco_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) & | |
| CHA_ID_MS_DECO_MASK) >> CHA_ID_MS_DECO_SHIFT; | |
| for (i = 0; i < deco_inst; i++) { | |
| state->deco_mid[i].liodn_ms = | |
| rd_reg32(&ctrl->deco_mid[i].liodn_ms); | |
| state->deco_mid[i].liodn_ls = | |
| rd_reg32(&ctrl->deco_mid[i].liodn_ls); | |
| } | |
| jr_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) & | |
| CHA_ID_MS_JR_MASK) >> CHA_ID_MS_JR_SHIFT; | |
| for (i = 0; i < jr_inst; i++) { | |
| state->jr_mid[i].liodn_ms = | |
| rd_reg32(&ctrl->jr_mid[i].liodn_ms); | |
| state->jr_mid[i].liodn_ls = | |
| rd_reg32(&ctrl->jr_mid[i].liodn_ls); | |
| } | |
| } | |
| static void caam_state_restore(const struct device *dev) | |
| { | |
| const struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| const struct caam_ctl_state *state = &ctrlpriv->state; | |
| struct caam_ctrl __iomem *ctrl = ctrlpriv->ctrl; | |
| u32 deco_inst, jr_inst; | |
| int i; | |
| wr_reg32(&ctrl->mcr, state->mcr); | |
| wr_reg32(&ctrl->scfgr, state->scfgr); | |
| deco_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) & | |
| CHA_ID_MS_DECO_MASK) >> CHA_ID_MS_DECO_SHIFT; | |
| for (i = 0; i < deco_inst; i++) { | |
| wr_reg32(&ctrl->deco_mid[i].liodn_ms, | |
| state->deco_mid[i].liodn_ms); | |
| wr_reg32(&ctrl->deco_mid[i].liodn_ls, | |
| state->deco_mid[i].liodn_ls); | |
| } | |
| jr_inst = (rd_reg32(&ctrl->perfmon.cha_num_ms) & | |
| CHA_ID_MS_JR_MASK) >> CHA_ID_MS_JR_SHIFT; | |
| for (i = 0; i < jr_inst; i++) { | |
| wr_reg32(&ctrl->jr_mid[i].liodn_ms, | |
| state->jr_mid[i].liodn_ms); | |
| wr_reg32(&ctrl->jr_mid[i].liodn_ls, | |
| state->jr_mid[i].liodn_ls); | |
| } | |
| if (ctrlpriv->virt_en == 1) | |
| clrsetbits_32(&ctrl->jrstart, 0, JRSTART_JR0_START | | |
| JRSTART_JR1_START | JRSTART_JR2_START | | |
| JRSTART_JR3_START); | |
| } | |
| static int caam_ctrl_suspend(struct device *dev) | |
| { | |
| const struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| if (ctrlpriv->caam_off_during_pm && !ctrlpriv->optee_en) | |
| caam_state_save(dev); | |
| return 0; | |
| } | |
| static int caam_ctrl_resume(struct device *dev) | |
| { | |
| struct caam_drv_private *ctrlpriv = dev_get_drvdata(dev); | |
| int ret = 0; | |
| if (ctrlpriv->caam_off_during_pm && !ctrlpriv->optee_en) { | |
| caam_state_restore(dev); | |
| /* HW and rng will be reset so deinstantiation can be removed */ | |
| devm_remove_action(dev, devm_deinstantiate_rng, dev); | |
| ret = caam_ctrl_rng_init(dev); | |
| } | |
| return ret; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(caam_ctrl_pm_ops, caam_ctrl_suspend, caam_ctrl_resume); | |
| /* Probe routine for CAAM top (controller) level */ | |
| static int caam_probe(struct platform_device *pdev) | |
| { | |
| int ret, ring; | |
| u64 caam_id; | |
| const struct soc_device_attribute *imx_soc_match; | |
| struct device *dev; | |
| struct device_node *nprop, *np; | |
| struct caam_ctrl __iomem *ctrl; | |
| struct caam_drv_private *ctrlpriv; | |
| struct caam_perfmon __iomem *perfmon; | |
| struct dentry *dfs_root; | |
| u32 scfgr, comp_params; | |
| int pg_size; | |
| int BLOCK_OFFSET = 0; | |
| bool reg_access = true; | |
| ctrlpriv = devm_kzalloc(&pdev->dev, sizeof(*ctrlpriv), GFP_KERNEL); | |
| if (!ctrlpriv) | |
| return -ENOMEM; | |
| dev = &pdev->dev; | |
| dev_set_drvdata(dev, ctrlpriv); | |
| nprop = pdev->dev.of_node; | |
| imx_soc_match = soc_device_match(caam_imx_soc_table); | |
| if (!imx_soc_match && of_match_node(imx8m_machine_match, of_root)) | |
| return -EPROBE_DEFER; | |
| caam_imx = (bool)imx_soc_match; | |
| ctrlpriv->caam_off_during_pm = caam_imx && caam_off_during_pm(); | |
| if (imx_soc_match) { | |
| /* | |
| * Until Layerscape and i.MX OP-TEE get in sync, | |
| * only i.MX OP-TEE use cases disallow access to | |
| * caam page 0 (controller) registers. | |
| */ | |
| np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz"); | |
| ctrlpriv->optee_en = !!np; | |
| of_node_put(np); | |
| reg_access = !ctrlpriv->optee_en; | |
| if (!imx_soc_match->data) { | |
| dev_err(dev, "No clock data provided for i.MX SoC"); | |
| return -EINVAL; | |
| } | |
| ret = init_clocks(dev, imx_soc_match->data); | |
| if (ret) | |
| return ret; | |
| } | |
| /* Get configuration properties from device tree */ | |
| /* First, get register page */ | |
| ctrl = devm_of_iomap(dev, nprop, 0, NULL); | |
| ret = PTR_ERR_OR_ZERO(ctrl); | |
| if (ret) { | |
| dev_err(dev, "caam: of_iomap() failed\n"); | |
| return ret; | |
| } | |
| ring = 0; | |
| for_each_available_child_of_node(nprop, np) | |
| if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") || | |
| of_device_is_compatible(np, "fsl,sec4.0-job-ring")) { | |
| u32 reg; | |
| if (of_property_read_u32_index(np, "reg", 0, ®)) { | |
| dev_err(dev, "%s read reg property error\n", | |
| np->full_name); | |
| continue; | |
| } | |
| ctrlpriv->jr[ring] = (struct caam_job_ring __iomem __force *) | |
| ((__force uint8_t *)ctrl + reg); | |
| ctrlpriv->total_jobrs++; | |
| ring++; | |
| } | |
| /* | |
| * Wherever possible, instead of accessing registers from the global page, | |
| * use the alias registers in the first (cf. DT nodes order) | |
| * job ring's page. | |
| */ | |
| perfmon = ring ? (struct caam_perfmon __iomem *)&ctrlpriv->jr[0]->perfmon : | |
| (struct caam_perfmon __iomem *)&ctrl->perfmon; | |
| caam_little_end = !(bool)(rd_reg32(&perfmon->status) & | |
| (CSTA_PLEND | CSTA_ALT_PLEND)); | |
| comp_params = rd_reg32(&perfmon->comp_parms_ms); | |
| if (reg_access && comp_params & CTPR_MS_PS && | |
| rd_reg32(&ctrl->mcr) & MCFGR_LONG_PTR) | |
| caam_ptr_sz = sizeof(u64); | |
| else | |
| caam_ptr_sz = sizeof(u32); | |
| caam_dpaa2 = !!(comp_params & CTPR_MS_DPAA2); | |
| ctrlpriv->qi_present = !!(comp_params & CTPR_MS_QI_MASK); | |
| #ifdef CONFIG_CAAM_QI | |
| /* If (DPAA 1.x) QI present, check whether dependencies are available */ | |
| if (ctrlpriv->qi_present && !caam_dpaa2) { | |
| ret = qman_is_probed(); | |
| if (!ret) { | |
| return -EPROBE_DEFER; | |
| } else if (ret < 0) { | |
| dev_err(dev, "failing probe due to qman probe error\n"); | |
| return -ENODEV; | |
| } | |
| ret = qman_portals_probed(); | |
| if (!ret) { | |
| return -EPROBE_DEFER; | |
| } else if (ret < 0) { | |
| dev_err(dev, "failing probe due to qman portals probe error\n"); | |
| return -ENODEV; | |
| } | |
| } | |
| #endif | |
| /* Allocating the BLOCK_OFFSET based on the supported page size on | |
| * the platform | |
| */ | |
| pg_size = (comp_params & CTPR_MS_PG_SZ_MASK) >> CTPR_MS_PG_SZ_SHIFT; | |
| if (pg_size == 0) | |
| BLOCK_OFFSET = PG_SIZE_4K; | |
| else | |
| BLOCK_OFFSET = PG_SIZE_64K; | |
| ctrlpriv->ctrl = (struct caam_ctrl __iomem __force *)ctrl; | |
| ctrlpriv->assure = (struct caam_assurance __iomem __force *) | |
| ((__force uint8_t *)ctrl + | |
| BLOCK_OFFSET * ASSURE_BLOCK_NUMBER | |
| ); | |
| ctrlpriv->deco = (struct caam_deco __iomem __force *) | |
| ((__force uint8_t *)ctrl + | |
| BLOCK_OFFSET * DECO_BLOCK_NUMBER | |
| ); | |
| /* Get the IRQ of the controller (for security violations only) */ | |
| ctrlpriv->secvio_irq = irq_of_parse_and_map(nprop, 0); | |
| np = of_find_compatible_node(NULL, NULL, "fsl,qoriq-mc"); | |
| ctrlpriv->mc_en = !!np; | |
| of_node_put(np); | |
| #ifdef CONFIG_FSL_MC_BUS | |
| if (ctrlpriv->mc_en) { | |
| struct fsl_mc_version *mc_version; | |
| mc_version = fsl_mc_get_version(); | |
| if (mc_version) | |
| ctrlpriv->pr_support = check_version(mc_version, 10, 20, | |
| 0); | |
| else | |
| return -EPROBE_DEFER; | |
| } | |
| #endif | |
| if (!reg_access) | |
| goto set_dma_mask; | |
| /* | |
| * Enable DECO watchdogs and, if this is a PHYS_ADDR_T_64BIT kernel, | |
| * long pointers in master configuration register. | |
| * In case of SoCs with Management Complex, MC f/w performs | |
| * the configuration. | |
| */ | |
| if (!ctrlpriv->mc_en) | |
| clrsetbits_32(&ctrl->mcr, MCFGR_AWCACHE_MASK, | |
| MCFGR_AWCACHE_CACH | MCFGR_AWCACHE_BUFF | | |
| MCFGR_WDENABLE | MCFGR_LARGE_BURST); | |
| handle_imx6_err005766(&ctrl->mcr); | |
| /* | |
| * Read the Compile Time parameters and SCFGR to determine | |
| * if virtualization is enabled for this platform | |
| */ | |
| scfgr = rd_reg32(&ctrl->scfgr); | |
| ctrlpriv->virt_en = 0; | |
| if (comp_params & CTPR_MS_VIRT_EN_INCL) { | |
| /* VIRT_EN_INCL = 1 & VIRT_EN_POR = 1 or | |
| * VIRT_EN_INCL = 1 & VIRT_EN_POR = 0 & SCFGR_VIRT_EN = 1 | |
| */ | |
| if ((comp_params & CTPR_MS_VIRT_EN_POR) || | |
| (!(comp_params & CTPR_MS_VIRT_EN_POR) && | |
| (scfgr & SCFGR_VIRT_EN))) | |
| ctrlpriv->virt_en = 1; | |
| } else { | |
| /* VIRT_EN_INCL = 0 && VIRT_EN_POR_VALUE = 1 */ | |
| if (comp_params & CTPR_MS_VIRT_EN_POR) | |
| ctrlpriv->virt_en = 1; | |
| } | |
| if (ctrlpriv->virt_en == 1) | |
| clrsetbits_32(&ctrl->jrstart, 0, JRSTART_JR0_START | | |
| JRSTART_JR1_START | JRSTART_JR2_START | | |
| JRSTART_JR3_START); | |
| set_dma_mask: | |
| ret = dma_set_mask_and_coherent(dev, caam_get_dma_mask(dev)); | |
| if (ret) { | |
| dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n", ret); | |
| return ret; | |
| } | |
| ctrlpriv->era = caam_get_era(perfmon); | |
| ctrlpriv->domain = iommu_get_domain_for_dev(dev); | |
| dfs_root = debugfs_create_dir(dev_name(dev), NULL); | |
| if (IS_ENABLED(CONFIG_DEBUG_FS)) { | |
| ret = devm_add_action_or_reset(dev, caam_remove_debugfs, | |
| dfs_root); | |
| if (ret) | |
| return ret; | |
| } | |
| caam_debugfs_init(ctrlpriv, perfmon, dfs_root); | |
| /* Check to see if (DPAA 1.x) QI present. If so, enable */ | |
| if (ctrlpriv->qi_present && !caam_dpaa2) { | |
| ctrlpriv->qi = (struct caam_queue_if __iomem __force *) | |
| ((__force uint8_t *)ctrl + | |
| BLOCK_OFFSET * QI_BLOCK_NUMBER | |
| ); | |
| /* This is all that's required to physically enable QI */ | |
| wr_reg32(&ctrlpriv->qi->qi_control_lo, QICTL_DQEN); | |
| /* If QMAN driver is present, init CAAM-QI backend */ | |
| #ifdef CONFIG_CAAM_QI | |
| ret = caam_qi_init(pdev); | |
| if (ret) | |
| dev_err(dev, "caam qi i/f init failed: %d\n", ret); | |
| #endif | |
| } | |
| /* If no QI and no rings specified, quit and go home */ | |
| if ((!ctrlpriv->qi_present) && (!ctrlpriv->total_jobrs)) { | |
| dev_err(dev, "no queues configured, terminating\n"); | |
| return -ENOMEM; | |
| } | |
| comp_params = rd_reg32(&perfmon->comp_parms_ls); | |
| ctrlpriv->blob_present = !!(comp_params & CTPR_LS_BLOB); | |
| /* | |
| * Some SoCs like the LS1028A (non-E) indicate CTPR_LS_BLOB support, | |
| * but fail when actually using it due to missing AES support, so | |
| * check both here. | |
| */ | |
| if (ctrlpriv->era < 10) { | |
| ctrlpriv->blob_present = ctrlpriv->blob_present && | |
| (rd_reg32(&perfmon->cha_num_ls) & CHA_ID_LS_AES_MASK); | |
| } else { | |
| struct version_regs __iomem *vreg; | |
| vreg = ctrlpriv->total_jobrs ? | |
| (struct version_regs __iomem *)&ctrlpriv->jr[0]->vreg : | |
| (struct version_regs __iomem *)&ctrl->vreg; | |
| ctrlpriv->blob_present = ctrlpriv->blob_present && | |
| (rd_reg32(&vreg->aesa) & CHA_VER_MISC_AES_NUM_MASK); | |
| } | |
| if (reg_access) { | |
| ret = caam_ctrl_rng_init(dev); | |
| if (ret) | |
| return ret; | |
| } | |
| caam_id = (u64)rd_reg32(&perfmon->caam_id_ms) << 32 | | |
| (u64)rd_reg32(&perfmon->caam_id_ls); | |
| /* Report "alive" for developer to see */ | |
| dev_info(dev, "device ID = 0x%016llx (Era %d)\n", caam_id, | |
| ctrlpriv->era); | |
| dev_info(dev, "job rings = %d, qi = %d\n", | |
| ctrlpriv->total_jobrs, ctrlpriv->qi_present); | |
| ret = devm_of_platform_populate(dev); | |
| if (ret) | |
| dev_err(dev, "JR platform devices creation error\n"); | |
| return ret; | |
| } | |
| static struct platform_driver caam_driver = { | |
| .driver = { | |
| .name = "caam", | |
| .of_match_table = caam_match, | |
| .pm = pm_ptr(&caam_ctrl_pm_ops), | |
| }, | |
| .probe = caam_probe, | |
| }; | |
| module_platform_driver(caam_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("FSL CAAM request backend"); | |
| MODULE_AUTHOR("Freescale Semiconductor - NMG/STC"); |