| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * MAXIM MAX77693/MAX77843 Haptic device driver | |
| * | |
| * Copyright (C) 2014,2015 Samsung Electronics | |
| * Jaewon Kim <jaewon02.kim@samsung.com> | |
| * Krzysztof Kozlowski <krzk@kernel.org> | |
| * | |
| * This program is not provided / owned by Maxim Integrated Products. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/i2c.h> | |
| #include <linux/regmap.h> | |
| #include <linux/input.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/mfd/max77693.h> | |
| #include <linux/mfd/max77693-common.h> | |
| #include <linux/mfd/max77693-private.h> | |
| #include <linux/mfd/max77843-private.h> | |
| #define MAX_MAGNITUDE_SHIFT 16 | |
| enum max77693_haptic_motor_type { | |
| MAX77693_HAPTIC_ERM = 0, | |
| MAX77693_HAPTIC_LRA, | |
| }; | |
| enum max77693_haptic_pulse_mode { | |
| MAX77693_HAPTIC_EXTERNAL_MODE = 0, | |
| MAX77693_HAPTIC_INTERNAL_MODE, | |
| }; | |
| enum max77693_haptic_pwm_divisor { | |
| MAX77693_HAPTIC_PWM_DIVISOR_32 = 0, | |
| MAX77693_HAPTIC_PWM_DIVISOR_64, | |
| MAX77693_HAPTIC_PWM_DIVISOR_128, | |
| MAX77693_HAPTIC_PWM_DIVISOR_256, | |
| }; | |
| struct max77693_haptic { | |
| enum max77693_types dev_type; | |
| struct regmap *regmap_pmic; | |
| struct regmap *regmap_haptic; | |
| struct device *dev; | |
| struct input_dev *input_dev; | |
| struct pwm_device *pwm_dev; | |
| struct regulator *motor_reg; | |
| bool enabled; | |
| bool suspend_state; | |
| unsigned int magnitude; | |
| unsigned int pwm_duty; | |
| enum max77693_haptic_motor_type type; | |
| enum max77693_haptic_pulse_mode mode; | |
| struct work_struct work; | |
| }; | |
| static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic) | |
| { | |
| struct pwm_args pargs; | |
| int delta; | |
| int error; | |
| pwm_get_args(haptic->pwm_dev, &pargs); | |
| delta = (pargs.period + haptic->pwm_duty) / 2; | |
| error = pwm_config(haptic->pwm_dev, delta, pargs.period); | |
| if (error) { | |
| dev_err(haptic->dev, "failed to configure pwm: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int max77843_haptic_bias(struct max77693_haptic *haptic, bool on) | |
| { | |
| int error; | |
| if (haptic->dev_type != TYPE_MAX77843) | |
| return 0; | |
| error = regmap_update_bits(haptic->regmap_haptic, | |
| MAX77843_SYS_REG_MAINCTRL1, | |
| MAX77843_MAINCTRL1_BIASEN_MASK, | |
| on << MAINCTRL1_BIASEN_SHIFT); | |
| if (error) { | |
| dev_err(haptic->dev, "failed to %s bias: %d\n", | |
| on ? "enable" : "disable", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int max77693_haptic_configure(struct max77693_haptic *haptic, | |
| bool enable) | |
| { | |
| unsigned int value, config_reg; | |
| int error; | |
| switch (haptic->dev_type) { | |
| case TYPE_MAX77693: | |
| value = ((haptic->type << MAX77693_CONFIG2_MODE) | | |
| (enable << MAX77693_CONFIG2_MEN) | | |
| (haptic->mode << MAX77693_CONFIG2_HTYP) | | |
| MAX77693_HAPTIC_PWM_DIVISOR_128); | |
| config_reg = MAX77693_HAPTIC_REG_CONFIG2; | |
| break; | |
| case TYPE_MAX77843: | |
| value = (haptic->type << MCONFIG_MODE_SHIFT) | | |
| (enable << MCONFIG_MEN_SHIFT) | | |
| MAX77693_HAPTIC_PWM_DIVISOR_128; | |
| config_reg = MAX77843_HAP_REG_MCONFIG; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| error = regmap_write(haptic->regmap_haptic, | |
| config_reg, value); | |
| if (error) { | |
| dev_err(haptic->dev, | |
| "failed to update haptic config: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable) | |
| { | |
| int error; | |
| if (haptic->dev_type != TYPE_MAX77693) | |
| return 0; | |
| error = regmap_update_bits(haptic->regmap_pmic, | |
| MAX77693_PMIC_REG_LSCNFG, | |
| MAX77693_PMIC_LOW_SYS_MASK, | |
| enable << MAX77693_PMIC_LOW_SYS_SHIFT); | |
| if (error) { | |
| dev_err(haptic->dev, "cannot update pmic regmap: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static void max77693_haptic_enable(struct max77693_haptic *haptic) | |
| { | |
| int error; | |
| if (haptic->enabled) | |
| return; | |
| error = pwm_enable(haptic->pwm_dev); | |
| if (error) { | |
| dev_err(haptic->dev, | |
| "failed to enable haptic pwm device: %d\n", error); | |
| return; | |
| } | |
| error = max77693_haptic_lowsys(haptic, true); | |
| if (error) | |
| goto err_enable_lowsys; | |
| error = max77693_haptic_configure(haptic, true); | |
| if (error) | |
| goto err_enable_config; | |
| haptic->enabled = true; | |
| return; | |
| err_enable_config: | |
| max77693_haptic_lowsys(haptic, false); | |
| err_enable_lowsys: | |
| pwm_disable(haptic->pwm_dev); | |
| } | |
| static void max77693_haptic_disable(struct max77693_haptic *haptic) | |
| { | |
| int error; | |
| if (!haptic->enabled) | |
| return; | |
| error = max77693_haptic_configure(haptic, false); | |
| if (error) | |
| return; | |
| error = max77693_haptic_lowsys(haptic, false); | |
| if (error) | |
| goto err_disable_lowsys; | |
| pwm_disable(haptic->pwm_dev); | |
| haptic->enabled = false; | |
| return; | |
| err_disable_lowsys: | |
| max77693_haptic_configure(haptic, true); | |
| } | |
| static void max77693_haptic_play_work(struct work_struct *work) | |
| { | |
| struct max77693_haptic *haptic = | |
| container_of(work, struct max77693_haptic, work); | |
| int error; | |
| error = max77693_haptic_set_duty_cycle(haptic); | |
| if (error) { | |
| dev_err(haptic->dev, "failed to set duty cycle: %d\n", error); | |
| return; | |
| } | |
| if (haptic->magnitude) | |
| max77693_haptic_enable(haptic); | |
| else | |
| max77693_haptic_disable(haptic); | |
| } | |
| static int max77693_haptic_play_effect(struct input_dev *dev, void *data, | |
| struct ff_effect *effect) | |
| { | |
| struct max77693_haptic *haptic = input_get_drvdata(dev); | |
| struct pwm_args pargs; | |
| u64 period_mag_multi; | |
| haptic->magnitude = effect->u.rumble.strong_magnitude; | |
| if (!haptic->magnitude) | |
| haptic->magnitude = effect->u.rumble.weak_magnitude; | |
| /* | |
| * The magnitude comes from force-feedback interface. | |
| * The formula to convert magnitude to pwm_duty as follows: | |
| * - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF) | |
| */ | |
| pwm_get_args(haptic->pwm_dev, &pargs); | |
| period_mag_multi = (u64)pargs.period * haptic->magnitude; | |
| haptic->pwm_duty = (unsigned int)(period_mag_multi >> | |
| MAX_MAGNITUDE_SHIFT); | |
| schedule_work(&haptic->work); | |
| return 0; | |
| } | |
| static int max77693_haptic_open(struct input_dev *dev) | |
| { | |
| struct max77693_haptic *haptic = input_get_drvdata(dev); | |
| int error; | |
| error = max77843_haptic_bias(haptic, true); | |
| if (error) | |
| return error; | |
| error = regulator_enable(haptic->motor_reg); | |
| if (error) { | |
| dev_err(haptic->dev, | |
| "failed to enable regulator: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static void max77693_haptic_close(struct input_dev *dev) | |
| { | |
| struct max77693_haptic *haptic = input_get_drvdata(dev); | |
| int error; | |
| cancel_work_sync(&haptic->work); | |
| max77693_haptic_disable(haptic); | |
| error = regulator_disable(haptic->motor_reg); | |
| if (error) | |
| dev_err(haptic->dev, | |
| "failed to disable regulator: %d\n", error); | |
| max77843_haptic_bias(haptic, false); | |
| } | |
| static int max77693_haptic_probe(struct platform_device *pdev) | |
| { | |
| struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent); | |
| struct max77693_haptic *haptic; | |
| int error; | |
| haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL); | |
| if (!haptic) | |
| return -ENOMEM; | |
| haptic->regmap_pmic = max77693->regmap; | |
| haptic->dev = &pdev->dev; | |
| haptic->type = MAX77693_HAPTIC_LRA; | |
| haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE; | |
| haptic->suspend_state = false; | |
| /* Variant-specific init */ | |
| haptic->dev_type = platform_get_device_id(pdev)->driver_data; | |
| switch (haptic->dev_type) { | |
| case TYPE_MAX77693: | |
| haptic->regmap_haptic = max77693->regmap_haptic; | |
| break; | |
| case TYPE_MAX77843: | |
| haptic->regmap_haptic = max77693->regmap; | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "unsupported device type: %u\n", | |
| haptic->dev_type); | |
| return -EINVAL; | |
| } | |
| INIT_WORK(&haptic->work, max77693_haptic_play_work); | |
| /* Get pwm and regulatot for haptic device */ | |
| haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL); | |
| if (IS_ERR(haptic->pwm_dev)) { | |
| dev_err(&pdev->dev, "failed to get pwm device\n"); | |
| return PTR_ERR(haptic->pwm_dev); | |
| } | |
| /* | |
| * FIXME: pwm_apply_args() should be removed when switching to the | |
| * atomic PWM API. | |
| */ | |
| pwm_apply_args(haptic->pwm_dev); | |
| haptic->motor_reg = devm_regulator_get(&pdev->dev, "haptic"); | |
| if (IS_ERR(haptic->motor_reg)) { | |
| dev_err(&pdev->dev, "failed to get regulator\n"); | |
| return PTR_ERR(haptic->motor_reg); | |
| } | |
| /* Initialize input device for haptic device */ | |
| haptic->input_dev = devm_input_allocate_device(&pdev->dev); | |
| if (!haptic->input_dev) { | |
| dev_err(&pdev->dev, "failed to allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| haptic->input_dev->name = "max77693-haptic"; | |
| haptic->input_dev->id.version = 1; | |
| haptic->input_dev->dev.parent = &pdev->dev; | |
| haptic->input_dev->open = max77693_haptic_open; | |
| haptic->input_dev->close = max77693_haptic_close; | |
| input_set_drvdata(haptic->input_dev, haptic); | |
| input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE); | |
| error = input_ff_create_memless(haptic->input_dev, NULL, | |
| max77693_haptic_play_effect); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to create force-feedback\n"); | |
| return error; | |
| } | |
| error = input_register_device(haptic->input_dev); | |
| if (error) { | |
| dev_err(&pdev->dev, "failed to register input device\n"); | |
| return error; | |
| } | |
| platform_set_drvdata(pdev, haptic); | |
| return 0; | |
| } | |
| static int __maybe_unused max77693_haptic_suspend(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct max77693_haptic *haptic = platform_get_drvdata(pdev); | |
| if (haptic->enabled) { | |
| max77693_haptic_disable(haptic); | |
| haptic->suspend_state = true; | |
| } | |
| return 0; | |
| } | |
| static int __maybe_unused max77693_haptic_resume(struct device *dev) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| struct max77693_haptic *haptic = platform_get_drvdata(pdev); | |
| if (haptic->suspend_state) { | |
| max77693_haptic_enable(haptic); | |
| haptic->suspend_state = false; | |
| } | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops, | |
| max77693_haptic_suspend, max77693_haptic_resume); | |
| static const struct platform_device_id max77693_haptic_id[] = { | |
| { "max77693-haptic", TYPE_MAX77693 }, | |
| { "max77843-haptic", TYPE_MAX77843 }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, max77693_haptic_id); | |
| static struct platform_driver max77693_haptic_driver = { | |
| .driver = { | |
| .name = "max77693-haptic", | |
| .pm = &max77693_haptic_pm_ops, | |
| }, | |
| .probe = max77693_haptic_probe, | |
| .id_table = max77693_haptic_id, | |
| }; | |
| module_platform_driver(max77693_haptic_driver); | |
| MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); | |
| MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>"); | |
| MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver"); | |
| MODULE_ALIAS("platform:max77693-haptic"); | |
| MODULE_LICENSE("GPL"); |