| /* | |
| * Freescale i.MX Frame Buffer device driver | |
| * | |
| * Copyright (C) 2004 Sascha Hauer, Pengutronix | |
| * Based on acornfb.c Copyright (C) Russell King. | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file COPYING in the main directory of this archive for | |
| * more details. | |
| * | |
| * Please direct your questions and comments on this driver to the following | |
| * email address: | |
| * | |
| * linux-arm-kernel@lists.arm.linux.org.uk | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/fb.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/clk.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/io.h> | |
| #include <linux/lcd.h> | |
| #include <linux/math64.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <video/of_display_timing.h> | |
| #include <video/of_videomode.h> | |
| #include <video/videomode.h> | |
| #include <linux/platform_data/video-imxfb.h> | |
| /* | |
| * Complain if VAR is out of range. | |
| */ | |
| #define DEBUG_VAR 1 | |
| #define DRIVER_NAME "imx-fb" | |
| #define LCDC_SSA 0x00 | |
| #define LCDC_SIZE 0x04 | |
| #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) | |
| #define YMAX_MASK_IMX1 0x1ff | |
| #define YMAX_MASK_IMX21 0x3ff | |
| #define LCDC_VPW 0x08 | |
| #define VPW_VPW(x) ((x) & 0x3ff) | |
| #define LCDC_CPOS 0x0C | |
| #define CPOS_CC1 (1<<31) | |
| #define CPOS_CC0 (1<<30) | |
| #define CPOS_OP (1<<28) | |
| #define CPOS_CXP(x) (((x) & 3ff) << 16) | |
| #define LCDC_LCWHB 0x10 | |
| #define LCWHB_BK_EN (1<<31) | |
| #define LCWHB_CW(w) (((w) & 0x1f) << 24) | |
| #define LCWHB_CH(h) (((h) & 0x1f) << 16) | |
| #define LCWHB_BD(x) ((x) & 0xff) | |
| #define LCDC_LCHCC 0x14 | |
| #define LCDC_PCR 0x18 | |
| #define LCDC_HCR 0x1C | |
| #define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) | |
| #define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) | |
| #define HCR_H_WAIT_2(x) ((x) & 0xff) | |
| #define LCDC_VCR 0x20 | |
| #define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) | |
| #define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) | |
| #define VCR_V_WAIT_2(x) ((x) & 0xff) | |
| #define LCDC_POS 0x24 | |
| #define POS_POS(x) ((x) & 1f) | |
| #define LCDC_LSCR1 0x28 | |
| /* bit fields in imxfb.h */ | |
| #define LCDC_PWMR 0x2C | |
| /* bit fields in imxfb.h */ | |
| #define LCDC_DMACR 0x30 | |
| /* bit fields in imxfb.h */ | |
| #define LCDC_RMCR 0x34 | |
| #define RMCR_LCDC_EN_MX1 (1<<1) | |
| #define RMCR_SELF_REF (1<<0) | |
| #define LCDC_LCDICR 0x38 | |
| #define LCDICR_INT_SYN (1<<2) | |
| #define LCDICR_INT_CON (1) | |
| #define LCDC_LCDISR 0x40 | |
| #define LCDISR_UDR_ERR (1<<3) | |
| #define LCDISR_ERR_RES (1<<2) | |
| #define LCDISR_EOF (1<<1) | |
| #define LCDISR_BOF (1<<0) | |
| #define IMXFB_LSCR1_DEFAULT 0x00120300 | |
| #define LCDC_LAUSCR 0x80 | |
| #define LAUSCR_AUS_MODE (1<<31) | |
| /* Used fb-mode. Can be set on kernel command line, therefore file-static. */ | |
| static const char *fb_mode; | |
| /* | |
| * These are the bitfields for each | |
| * display depth that we support. | |
| */ | |
| struct imxfb_rgb { | |
| struct fb_bitfield red; | |
| struct fb_bitfield green; | |
| struct fb_bitfield blue; | |
| struct fb_bitfield transp; | |
| }; | |
| enum imxfb_type { | |
| IMX1_FB, | |
| IMX21_FB, | |
| }; | |
| struct imxfb_info { | |
| struct platform_device *pdev; | |
| void __iomem *regs; | |
| struct clk *clk_ipg; | |
| struct clk *clk_ahb; | |
| struct clk *clk_per; | |
| enum imxfb_type devtype; | |
| bool enabled; | |
| /* | |
| * These are the addresses we mapped | |
| * the framebuffer memory region to. | |
| */ | |
| dma_addr_t map_dma; | |
| u_int map_size; | |
| u_int palette_size; | |
| dma_addr_t dbar1; | |
| dma_addr_t dbar2; | |
| u_int pcr; | |
| u_int lauscr; | |
| u_int pwmr; | |
| u_int lscr1; | |
| u_int dmacr; | |
| bool cmap_inverse; | |
| bool cmap_static; | |
| struct imx_fb_videomode *mode; | |
| int num_modes; | |
| struct regulator *lcd_pwr; | |
| }; | |
| static const struct platform_device_id imxfb_devtype[] = { | |
| { | |
| .name = "imx1-fb", | |
| .driver_data = IMX1_FB, | |
| }, { | |
| .name = "imx21-fb", | |
| .driver_data = IMX21_FB, | |
| }, { | |
| /* sentinel */ | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(platform, imxfb_devtype); | |
| static const struct of_device_id imxfb_of_dev_id[] = { | |
| { | |
| .compatible = "fsl,imx1-fb", | |
| .data = &imxfb_devtype[IMX1_FB], | |
| }, { | |
| .compatible = "fsl,imx21-fb", | |
| .data = &imxfb_devtype[IMX21_FB], | |
| }, { | |
| /* sentinel */ | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(of, imxfb_of_dev_id); | |
| static inline int is_imx1_fb(struct imxfb_info *fbi) | |
| { | |
| return fbi->devtype == IMX1_FB; | |
| } | |
| #define IMX_NAME "IMX" | |
| /* | |
| * Minimum X and Y resolutions | |
| */ | |
| #define MIN_XRES 64 | |
| #define MIN_YRES 64 | |
| /* Actually this really is 18bit support, the lowest 2 bits of each colour | |
| * are unused in hardware. We claim to have 24bit support to make software | |
| * like X work, which does not support 18bit. | |
| */ | |
| static struct imxfb_rgb def_rgb_18 = { | |
| .red = {.offset = 16, .length = 8,}, | |
| .green = {.offset = 8, .length = 8,}, | |
| .blue = {.offset = 0, .length = 8,}, | |
| .transp = {.offset = 0, .length = 0,}, | |
| }; | |
| static struct imxfb_rgb def_rgb_16_tft = { | |
| .red = {.offset = 11, .length = 5,}, | |
| .green = {.offset = 5, .length = 6,}, | |
| .blue = {.offset = 0, .length = 5,}, | |
| .transp = {.offset = 0, .length = 0,}, | |
| }; | |
| static struct imxfb_rgb def_rgb_16_stn = { | |
| .red = {.offset = 8, .length = 4,}, | |
| .green = {.offset = 4, .length = 4,}, | |
| .blue = {.offset = 0, .length = 4,}, | |
| .transp = {.offset = 0, .length = 0,}, | |
| }; | |
| static struct imxfb_rgb def_rgb_8 = { | |
| .red = {.offset = 0, .length = 8,}, | |
| .green = {.offset = 0, .length = 8,}, | |
| .blue = {.offset = 0, .length = 8,}, | |
| .transp = {.offset = 0, .length = 0,}, | |
| }; | |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, | |
| struct fb_info *info); | |
| static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) | |
| { | |
| chan &= 0xffff; | |
| chan >>= 16 - bf->length; | |
| return chan << bf->offset; | |
| } | |
| static int imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int trans, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| u_int val, ret = 1; | |
| #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16) | |
| if (regno < fbi->palette_size) { | |
| val = (CNVT_TOHW(red, 4) << 8) | | |
| (CNVT_TOHW(green,4) << 4) | | |
| CNVT_TOHW(blue, 4); | |
| writel(val, fbi->regs + 0x800 + (regno << 2)); | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, | |
| u_int trans, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| unsigned int val; | |
| int ret = 1; | |
| /* | |
| * If inverse mode was selected, invert all the colours | |
| * rather than the register number. The register number | |
| * is what you poke into the framebuffer to produce the | |
| * colour you requested. | |
| */ | |
| if (fbi->cmap_inverse) { | |
| red = 0xffff - red; | |
| green = 0xffff - green; | |
| blue = 0xffff - blue; | |
| } | |
| /* | |
| * If greyscale is true, then we convert the RGB value | |
| * to greyscale no mater what visual we are using. | |
| */ | |
| if (info->var.grayscale) | |
| red = green = blue = (19595 * red + 38470 * green + | |
| 7471 * blue) >> 16; | |
| switch (info->fix.visual) { | |
| case FB_VISUAL_TRUECOLOR: | |
| /* | |
| * 12 or 16-bit True Colour. We encode the RGB value | |
| * according to the RGB bitfield information. | |
| */ | |
| if (regno < 16) { | |
| u32 *pal = info->pseudo_palette; | |
| val = chan_to_field(red, &info->var.red); | |
| val |= chan_to_field(green, &info->var.green); | |
| val |= chan_to_field(blue, &info->var.blue); | |
| pal[regno] = val; | |
| ret = 0; | |
| } | |
| break; | |
| case FB_VISUAL_STATIC_PSEUDOCOLOR: | |
| case FB_VISUAL_PSEUDOCOLOR: | |
| ret = imxfb_setpalettereg(regno, red, green, blue, trans, info); | |
| break; | |
| } | |
| return ret; | |
| } | |
| static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi) | |
| { | |
| struct imx_fb_videomode *m; | |
| int i; | |
| if (!fb_mode) | |
| return &fbi->mode[0]; | |
| for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) { | |
| if (!strcmp(m->mode.name, fb_mode)) | |
| return m; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * imxfb_check_var(): | |
| * Round up in the following order: bits_per_pixel, xres, | |
| * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, | |
| * bitfields, horizontal timing, vertical timing. | |
| */ | |
| static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| struct imxfb_rgb *rgb; | |
| const struct imx_fb_videomode *imxfb_mode; | |
| unsigned long lcd_clk; | |
| unsigned long long tmp; | |
| u32 pcr = 0; | |
| if (var->xres < MIN_XRES) | |
| var->xres = MIN_XRES; | |
| if (var->yres < MIN_YRES) | |
| var->yres = MIN_YRES; | |
| imxfb_mode = imxfb_find_mode(fbi); | |
| if (!imxfb_mode) | |
| return -EINVAL; | |
| var->xres = imxfb_mode->mode.xres; | |
| var->yres = imxfb_mode->mode.yres; | |
| var->bits_per_pixel = imxfb_mode->bpp; | |
| var->pixclock = imxfb_mode->mode.pixclock; | |
| var->hsync_len = imxfb_mode->mode.hsync_len; | |
| var->left_margin = imxfb_mode->mode.left_margin; | |
| var->right_margin = imxfb_mode->mode.right_margin; | |
| var->vsync_len = imxfb_mode->mode.vsync_len; | |
| var->upper_margin = imxfb_mode->mode.upper_margin; | |
| var->lower_margin = imxfb_mode->mode.lower_margin; | |
| var->sync = imxfb_mode->mode.sync; | |
| var->xres_virtual = max(var->xres_virtual, var->xres); | |
| var->yres_virtual = max(var->yres_virtual, var->yres); | |
| pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); | |
| lcd_clk = clk_get_rate(fbi->clk_per); | |
| tmp = var->pixclock * (unsigned long long)lcd_clk; | |
| do_div(tmp, 1000000); | |
| if (do_div(tmp, 1000000) > 500000) | |
| tmp++; | |
| pcr = (unsigned int)tmp; | |
| if (--pcr > 0x3F) { | |
| pcr = 0x3F; | |
| printk(KERN_WARNING "Must limit pixel clock to %luHz\n", | |
| lcd_clk / pcr); | |
| } | |
| switch (var->bits_per_pixel) { | |
| case 32: | |
| pcr |= PCR_BPIX_18; | |
| rgb = &def_rgb_18; | |
| break; | |
| case 16: | |
| default: | |
| if (is_imx1_fb(fbi)) | |
| pcr |= PCR_BPIX_12; | |
| else | |
| pcr |= PCR_BPIX_16; | |
| if (imxfb_mode->pcr & PCR_TFT) | |
| rgb = &def_rgb_16_tft; | |
| else | |
| rgb = &def_rgb_16_stn; | |
| break; | |
| case 8: | |
| pcr |= PCR_BPIX_8; | |
| rgb = &def_rgb_8; | |
| break; | |
| } | |
| /* add sync polarities */ | |
| pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25)); | |
| fbi->pcr = pcr; | |
| /* | |
| * The LCDC AUS Mode Control Register does not exist on imx1. | |
| */ | |
| if (!is_imx1_fb(fbi) && imxfb_mode->aus_mode) | |
| fbi->lauscr = LAUSCR_AUS_MODE; | |
| /* | |
| * Copy the RGB parameters for this display | |
| * from the machine specific parameters. | |
| */ | |
| var->red = rgb->red; | |
| var->green = rgb->green; | |
| var->blue = rgb->blue; | |
| var->transp = rgb->transp; | |
| pr_debug("RGBT length = %d:%d:%d:%d\n", | |
| var->red.length, var->green.length, var->blue.length, | |
| var->transp.length); | |
| pr_debug("RGBT offset = %d:%d:%d:%d\n", | |
| var->red.offset, var->green.offset, var->blue.offset, | |
| var->transp.offset); | |
| return 0; | |
| } | |
| /* | |
| * imxfb_set_par(): | |
| * Set the user defined part of the display for the specified console | |
| */ | |
| static int imxfb_set_par(struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| struct fb_var_screeninfo *var = &info->var; | |
| if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32) | |
| info->fix.visual = FB_VISUAL_TRUECOLOR; | |
| else if (!fbi->cmap_static) | |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | |
| else { | |
| /* | |
| * Some people have weird ideas about wanting static | |
| * pseudocolor maps. I suspect their user space | |
| * applications are broken. | |
| */ | |
| info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; | |
| } | |
| info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; | |
| fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; | |
| imxfb_activate_var(var, info); | |
| return 0; | |
| } | |
| static int imxfb_enable_controller(struct imxfb_info *fbi) | |
| { | |
| int ret; | |
| if (fbi->enabled) | |
| return 0; | |
| pr_debug("Enabling LCD controller\n"); | |
| writel(fbi->map_dma, fbi->regs + LCDC_SSA); | |
| /* panning offset 0 (0 pixel offset) */ | |
| writel(0x00000000, fbi->regs + LCDC_POS); | |
| /* disable hardware cursor */ | |
| writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1), | |
| fbi->regs + LCDC_CPOS); | |
| /* | |
| * RMCR_LCDC_EN_MX1 is present on i.MX1 only, but doesn't hurt | |
| * on other SoCs | |
| */ | |
| writel(RMCR_LCDC_EN_MX1, fbi->regs + LCDC_RMCR); | |
| ret = clk_prepare_enable(fbi->clk_ipg); | |
| if (ret) | |
| goto err_enable_ipg; | |
| ret = clk_prepare_enable(fbi->clk_ahb); | |
| if (ret) | |
| goto err_enable_ahb; | |
| ret = clk_prepare_enable(fbi->clk_per); | |
| if (ret) | |
| goto err_enable_per; | |
| fbi->enabled = true; | |
| return 0; | |
| err_enable_per: | |
| clk_disable_unprepare(fbi->clk_ahb); | |
| err_enable_ahb: | |
| clk_disable_unprepare(fbi->clk_ipg); | |
| err_enable_ipg: | |
| writel(0, fbi->regs + LCDC_RMCR); | |
| return ret; | |
| } | |
| static void imxfb_disable_controller(struct imxfb_info *fbi) | |
| { | |
| if (!fbi->enabled) | |
| return; | |
| pr_debug("Disabling LCD controller\n"); | |
| clk_disable_unprepare(fbi->clk_per); | |
| clk_disable_unprepare(fbi->clk_ahb); | |
| clk_disable_unprepare(fbi->clk_ipg); | |
| fbi->enabled = false; | |
| writel(0, fbi->regs + LCDC_RMCR); | |
| } | |
| static int imxfb_blank(int blank, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| pr_debug("imxfb_blank: blank=%d\n", blank); | |
| switch (blank) { | |
| case FB_BLANK_POWERDOWN: | |
| case FB_BLANK_VSYNC_SUSPEND: | |
| case FB_BLANK_HSYNC_SUSPEND: | |
| case FB_BLANK_NORMAL: | |
| imxfb_disable_controller(fbi); | |
| break; | |
| case FB_BLANK_UNBLANK: | |
| return imxfb_enable_controller(fbi); | |
| } | |
| return 0; | |
| } | |
| static const struct fb_ops imxfb_ops = { | |
| .owner = THIS_MODULE, | |
| .fb_check_var = imxfb_check_var, | |
| .fb_set_par = imxfb_set_par, | |
| .fb_setcolreg = imxfb_setcolreg, | |
| .fb_fillrect = cfb_fillrect, | |
| .fb_copyarea = cfb_copyarea, | |
| .fb_imageblit = cfb_imageblit, | |
| .fb_blank = imxfb_blank, | |
| }; | |
| /* | |
| * imxfb_activate_var(): | |
| * Configures LCD Controller based on entries in var parameter. Settings are | |
| * only written to the controller if changes were made. | |
| */ | |
| static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) | |
| { | |
| struct imxfb_info *fbi = info->par; | |
| u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21; | |
| pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", | |
| var->xres, var->hsync_len, | |
| var->left_margin, var->right_margin); | |
| pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n", | |
| var->yres, var->vsync_len, | |
| var->upper_margin, var->lower_margin); | |
| #if DEBUG_VAR | |
| if (var->xres < 16 || var->xres > 1024) | |
| printk(KERN_ERR "%s: invalid xres %d\n", | |
| info->fix.id, var->xres); | |
| if (var->hsync_len < 1 || var->hsync_len > 64) | |
| printk(KERN_ERR "%s: invalid hsync_len %d\n", | |
| info->fix.id, var->hsync_len); | |
| if (var->left_margin > 255) | |
| printk(KERN_ERR "%s: invalid left_margin %d\n", | |
| info->fix.id, var->left_margin); | |
| if (var->right_margin > 255) | |
| printk(KERN_ERR "%s: invalid right_margin %d\n", | |
| info->fix.id, var->right_margin); | |
| if (var->yres < 1 || var->yres > ymax_mask) | |
| printk(KERN_ERR "%s: invalid yres %d\n", | |
| info->fix.id, var->yres); | |
| if (var->vsync_len > 100) | |
| printk(KERN_ERR "%s: invalid vsync_len %d\n", | |
| info->fix.id, var->vsync_len); | |
| if (var->upper_margin > 63) | |
| printk(KERN_ERR "%s: invalid upper_margin %d\n", | |
| info->fix.id, var->upper_margin); | |
| if (var->lower_margin > 255) | |
| printk(KERN_ERR "%s: invalid lower_margin %d\n", | |
| info->fix.id, var->lower_margin); | |
| #endif | |
| /* physical screen start address */ | |
| writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4), | |
| fbi->regs + LCDC_VPW); | |
| writel(HCR_H_WIDTH(var->hsync_len - 1) | | |
| HCR_H_WAIT_1(var->right_margin - 1) | | |
| HCR_H_WAIT_2(var->left_margin - 3), | |
| fbi->regs + LCDC_HCR); | |
| writel(VCR_V_WIDTH(var->vsync_len) | | |
| VCR_V_WAIT_1(var->lower_margin) | | |
| VCR_V_WAIT_2(var->upper_margin), | |
| fbi->regs + LCDC_VCR); | |
| writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask), | |
| fbi->regs + LCDC_SIZE); | |
| writel(fbi->pcr, fbi->regs + LCDC_PCR); | |
| if (fbi->pwmr) | |
| writel(fbi->pwmr, fbi->regs + LCDC_PWMR); | |
| writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); | |
| /* dmacr = 0 is no valid value, as we need DMA control marks. */ | |
| if (fbi->dmacr) | |
| writel(fbi->dmacr, fbi->regs + LCDC_DMACR); | |
| if (fbi->lauscr) | |
| writel(fbi->lauscr, fbi->regs + LCDC_LAUSCR); | |
| return 0; | |
| } | |
| static int imxfb_init_fbinfo(struct platform_device *pdev) | |
| { | |
| struct imx_fb_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct fb_info *info = dev_get_drvdata(&pdev->dev); | |
| struct imxfb_info *fbi = info->par; | |
| struct device_node *np; | |
| pr_debug("%s\n",__func__); | |
| info->pseudo_palette = kmalloc_array(16, sizeof(u32), GFP_KERNEL); | |
| if (!info->pseudo_palette) | |
| return -ENOMEM; | |
| memset(fbi, 0, sizeof(struct imxfb_info)); | |
| fbi->devtype = pdev->id_entry->driver_data; | |
| strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); | |
| info->fix.type = FB_TYPE_PACKED_PIXELS; | |
| info->fix.type_aux = 0; | |
| info->fix.xpanstep = 0; | |
| info->fix.ypanstep = 0; | |
| info->fix.ywrapstep = 0; | |
| info->fix.accel = FB_ACCEL_NONE; | |
| info->var.nonstd = 0; | |
| info->var.activate = FB_ACTIVATE_NOW; | |
| info->var.height = -1; | |
| info->var.width = -1; | |
| info->var.accel_flags = 0; | |
| info->var.vmode = FB_VMODE_NONINTERLACED; | |
| info->fbops = &imxfb_ops; | |
| info->flags = FBINFO_FLAG_DEFAULT | | |
| FBINFO_READS_FAST; | |
| if (pdata) { | |
| fbi->lscr1 = pdata->lscr1; | |
| fbi->dmacr = pdata->dmacr; | |
| fbi->pwmr = pdata->pwmr; | |
| } else { | |
| np = pdev->dev.of_node; | |
| info->var.grayscale = of_property_read_bool(np, | |
| "cmap-greyscale"); | |
| fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse"); | |
| fbi->cmap_static = of_property_read_bool(np, "cmap-static"); | |
| fbi->lscr1 = IMXFB_LSCR1_DEFAULT; | |
| of_property_read_u32(np, "fsl,lpccr", &fbi->pwmr); | |
| of_property_read_u32(np, "fsl,lscr1", &fbi->lscr1); | |
| of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr); | |
| } | |
| return 0; | |
| } | |
| static int imxfb_of_read_mode(struct device *dev, struct device_node *np, | |
| struct imx_fb_videomode *imxfb_mode) | |
| { | |
| int ret; | |
| struct fb_videomode *of_mode = &imxfb_mode->mode; | |
| u32 bpp; | |
| u32 pcr; | |
| ret = of_property_read_string(np, "model", &of_mode->name); | |
| if (ret) | |
| of_mode->name = NULL; | |
| ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE); | |
| if (ret) { | |
| dev_err(dev, "Failed to get videomode from DT\n"); | |
| return ret; | |
| } | |
| ret = of_property_read_u32(np, "bits-per-pixel", &bpp); | |
| ret |= of_property_read_u32(np, "fsl,pcr", &pcr); | |
| if (ret) { | |
| dev_err(dev, "Failed to read bpp and pcr from DT\n"); | |
| return -EINVAL; | |
| } | |
| if (bpp < 1 || bpp > 255) { | |
| dev_err(dev, "Bits per pixel have to be between 1 and 255\n"); | |
| return -EINVAL; | |
| } | |
| imxfb_mode->bpp = bpp; | |
| imxfb_mode->pcr = pcr; | |
| /* | |
| * fsl,aus-mode is optional | |
| */ | |
| imxfb_mode->aus_mode = of_property_read_bool(np, "fsl,aus-mode"); | |
| return 0; | |
| } | |
| static int imxfb_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi) | |
| { | |
| struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); | |
| if (!fi || fi->par == fbi) | |
| return 1; | |
| return 0; | |
| } | |
| static int imxfb_lcd_get_contrast(struct lcd_device *lcddev) | |
| { | |
| struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); | |
| return fbi->pwmr & 0xff; | |
| } | |
| static int imxfb_lcd_set_contrast(struct lcd_device *lcddev, int contrast) | |
| { | |
| struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); | |
| if (fbi->pwmr && fbi->enabled) { | |
| if (contrast > 255) | |
| contrast = 255; | |
| else if (contrast < 0) | |
| contrast = 0; | |
| fbi->pwmr &= ~0xff; | |
| fbi->pwmr |= contrast; | |
| writel(fbi->pwmr, fbi->regs + LCDC_PWMR); | |
| } | |
| return 0; | |
| } | |
| static int imxfb_lcd_get_power(struct lcd_device *lcddev) | |
| { | |
| struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); | |
| if (!IS_ERR(fbi->lcd_pwr) && | |
| !regulator_is_enabled(fbi->lcd_pwr)) | |
| return FB_BLANK_POWERDOWN; | |
| return FB_BLANK_UNBLANK; | |
| } | |
| static int imxfb_lcd_set_power(struct lcd_device *lcddev, int power) | |
| { | |
| struct imxfb_info *fbi = dev_get_drvdata(&lcddev->dev); | |
| if (!IS_ERR(fbi->lcd_pwr)) { | |
| if (power == FB_BLANK_UNBLANK) | |
| return regulator_enable(fbi->lcd_pwr); | |
| else | |
| return regulator_disable(fbi->lcd_pwr); | |
| } | |
| return 0; | |
| } | |
| static struct lcd_ops imxfb_lcd_ops = { | |
| .check_fb = imxfb_lcd_check_fb, | |
| .get_contrast = imxfb_lcd_get_contrast, | |
| .set_contrast = imxfb_lcd_set_contrast, | |
| .get_power = imxfb_lcd_get_power, | |
| .set_power = imxfb_lcd_set_power, | |
| }; | |
| static int imxfb_setup(void) | |
| { | |
| char *opt, *options = NULL; | |
| if (fb_get_options("imxfb", &options)) | |
| return -ENODEV; | |
| if (!options || !*options) | |
| return 0; | |
| while ((opt = strsep(&options, ",")) != NULL) { | |
| if (!*opt) | |
| continue; | |
| else | |
| fb_mode = opt; | |
| } | |
| return 0; | |
| } | |
| static int imxfb_probe(struct platform_device *pdev) | |
| { | |
| struct imxfb_info *fbi; | |
| struct lcd_device *lcd; | |
| struct fb_info *info; | |
| struct imx_fb_platform_data *pdata; | |
| struct resource *res; | |
| struct imx_fb_videomode *m; | |
| const struct of_device_id *of_id; | |
| int ret, i; | |
| int bytes_per_pixel; | |
| dev_info(&pdev->dev, "i.MX Framebuffer driver\n"); | |
| ret = imxfb_setup(); | |
| if (ret < 0) | |
| return ret; | |
| of_id = of_match_device(imxfb_of_dev_id, &pdev->dev); | |
| if (of_id) | |
| pdev->id_entry = of_id->data; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!res) | |
| return -ENODEV; | |
| pdata = dev_get_platdata(&pdev->dev); | |
| info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); | |
| if (!info) | |
| return -ENOMEM; | |
| fbi = info->par; | |
| platform_set_drvdata(pdev, info); | |
| ret = imxfb_init_fbinfo(pdev); | |
| if (ret < 0) | |
| goto failed_init; | |
| if (pdata) { | |
| if (!fb_mode) | |
| fb_mode = pdata->mode[0].mode.name; | |
| fbi->mode = pdata->mode; | |
| fbi->num_modes = pdata->num_modes; | |
| } else { | |
| struct device_node *display_np; | |
| fb_mode = NULL; | |
| display_np = of_parse_phandle(pdev->dev.of_node, "display", 0); | |
| if (!display_np) { | |
| dev_err(&pdev->dev, "No display defined in devicetree\n"); | |
| ret = -EINVAL; | |
| goto failed_of_parse; | |
| } | |
| /* | |
| * imxfb does not support more modes, we choose only the native | |
| * mode. | |
| */ | |
| fbi->num_modes = 1; | |
| fbi->mode = devm_kzalloc(&pdev->dev, | |
| sizeof(struct imx_fb_videomode), GFP_KERNEL); | |
| if (!fbi->mode) { | |
| ret = -ENOMEM; | |
| goto failed_of_parse; | |
| } | |
| ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode); | |
| if (ret) | |
| goto failed_of_parse; | |
| } | |
| /* Calculate maximum bytes used per pixel. In most cases this should | |
| * be the same as m->bpp/8 */ | |
| m = &fbi->mode[0]; | |
| bytes_per_pixel = (m->bpp + 7) / 8; | |
| for (i = 0; i < fbi->num_modes; i++, m++) | |
| info->fix.smem_len = max_t(size_t, info->fix.smem_len, | |
| m->mode.xres * m->mode.yres * bytes_per_pixel); | |
| res = request_mem_region(res->start, resource_size(res), | |
| DRIVER_NAME); | |
| if (!res) { | |
| ret = -EBUSY; | |
| goto failed_req; | |
| } | |
| fbi->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); | |
| if (IS_ERR(fbi->clk_ipg)) { | |
| ret = PTR_ERR(fbi->clk_ipg); | |
| goto failed_getclock; | |
| } | |
| /* | |
| * The LCDC controller does not have an enable bit. The | |
| * controller starts directly when the clocks are enabled. | |
| * If the clocks are enabled when the controller is not yet | |
| * programmed with proper register values (enabled at the | |
| * bootloader, for example) then it just goes into some undefined | |
| * state. | |
| * To avoid this issue, let's enable and disable LCDC IPG clock | |
| * so that we force some kind of 'reset' to the LCDC block. | |
| */ | |
| ret = clk_prepare_enable(fbi->clk_ipg); | |
| if (ret) | |
| goto failed_getclock; | |
| clk_disable_unprepare(fbi->clk_ipg); | |
| fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); | |
| if (IS_ERR(fbi->clk_ahb)) { | |
| ret = PTR_ERR(fbi->clk_ahb); | |
| goto failed_getclock; | |
| } | |
| fbi->clk_per = devm_clk_get(&pdev->dev, "per"); | |
| if (IS_ERR(fbi->clk_per)) { | |
| ret = PTR_ERR(fbi->clk_per); | |
| goto failed_getclock; | |
| } | |
| fbi->regs = ioremap(res->start, resource_size(res)); | |
| if (fbi->regs == NULL) { | |
| dev_err(&pdev->dev, "Cannot map frame buffer registers\n"); | |
| ret = -ENOMEM; | |
| goto failed_ioremap; | |
| } | |
| fbi->map_size = PAGE_ALIGN(info->fix.smem_len); | |
| info->screen_buffer = dma_alloc_wc(&pdev->dev, fbi->map_size, | |
| &fbi->map_dma, GFP_KERNEL); | |
| if (!info->screen_buffer) { | |
| dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret); | |
| ret = -ENOMEM; | |
| goto failed_map; | |
| } | |
| info->fix.smem_start = fbi->map_dma; | |
| if (pdata && pdata->init) { | |
| ret = pdata->init(fbi->pdev); | |
| if (ret) | |
| goto failed_platform_init; | |
| } | |
| INIT_LIST_HEAD(&info->modelist); | |
| for (i = 0; i < fbi->num_modes; i++) | |
| fb_add_videomode(&fbi->mode[i].mode, &info->modelist); | |
| /* | |
| * This makes sure that our colour bitfield | |
| * descriptors are correctly initialised. | |
| */ | |
| imxfb_check_var(&info->var, info); | |
| /* | |
| * For modes > 8bpp, the color map is bypassed. | |
| * Therefore, 256 entries are enough. | |
| */ | |
| ret = fb_alloc_cmap(&info->cmap, 256, 0); | |
| if (ret < 0) | |
| goto failed_cmap; | |
| imxfb_set_par(info); | |
| ret = register_framebuffer(info); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "failed to register framebuffer\n"); | |
| goto failed_register; | |
| } | |
| fbi->lcd_pwr = devm_regulator_get(&pdev->dev, "lcd"); | |
| if (PTR_ERR(fbi->lcd_pwr) == -EPROBE_DEFER) { | |
| ret = -EPROBE_DEFER; | |
| goto failed_lcd; | |
| } | |
| lcd = devm_lcd_device_register(&pdev->dev, "imxfb-lcd", &pdev->dev, fbi, | |
| &imxfb_lcd_ops); | |
| if (IS_ERR(lcd)) { | |
| ret = PTR_ERR(lcd); | |
| goto failed_lcd; | |
| } | |
| lcd->props.max_contrast = 0xff; | |
| imxfb_enable_controller(fbi); | |
| fbi->pdev = pdev; | |
| return 0; | |
| failed_lcd: | |
| unregister_framebuffer(info); | |
| failed_register: | |
| fb_dealloc_cmap(&info->cmap); | |
| failed_cmap: | |
| if (pdata && pdata->exit) | |
| pdata->exit(fbi->pdev); | |
| failed_platform_init: | |
| dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer, | |
| fbi->map_dma); | |
| failed_map: | |
| iounmap(fbi->regs); | |
| failed_ioremap: | |
| failed_getclock: | |
| release_mem_region(res->start, resource_size(res)); | |
| failed_req: | |
| failed_of_parse: | |
| kfree(info->pseudo_palette); | |
| failed_init: | |
| framebuffer_release(info); | |
| return ret; | |
| } | |
| static int imxfb_remove(struct platform_device *pdev) | |
| { | |
| struct imx_fb_platform_data *pdata; | |
| struct fb_info *info = platform_get_drvdata(pdev); | |
| struct imxfb_info *fbi = info->par; | |
| struct resource *res; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| imxfb_disable_controller(fbi); | |
| unregister_framebuffer(info); | |
| fb_dealloc_cmap(&info->cmap); | |
| pdata = dev_get_platdata(&pdev->dev); | |
| if (pdata && pdata->exit) | |
| pdata->exit(fbi->pdev); | |
| dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer, | |
| fbi->map_dma); | |
| iounmap(fbi->regs); | |
| release_mem_region(res->start, resource_size(res)); | |
| kfree(info->pseudo_palette); | |
| framebuffer_release(info); | |
| return 0; | |
| } | |
| static int __maybe_unused imxfb_suspend(struct device *dev) | |
| { | |
| struct fb_info *info = dev_get_drvdata(dev); | |
| struct imxfb_info *fbi = info->par; | |
| imxfb_disable_controller(fbi); | |
| return 0; | |
| } | |
| static int __maybe_unused imxfb_resume(struct device *dev) | |
| { | |
| struct fb_info *info = dev_get_drvdata(dev); | |
| struct imxfb_info *fbi = info->par; | |
| imxfb_enable_controller(fbi); | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume); | |
| static struct platform_driver imxfb_driver = { | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .of_match_table = imxfb_of_dev_id, | |
| .pm = &imxfb_pm_ops, | |
| }, | |
| .probe = imxfb_probe, | |
| .remove = imxfb_remove, | |
| .id_table = imxfb_devtype, | |
| }; | |
| module_platform_driver(imxfb_driver); | |
| MODULE_DESCRIPTION("Freescale i.MX framebuffer driver"); | |
| MODULE_AUTHOR("Sascha Hauer, Pengutronix"); | |
| MODULE_LICENSE("GPL"); |