blob: fcc281373b4d11a3e8357616b4cb1b435fe85af0 [file] [log] [blame]
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This validates that the kernel will load firmware out of its list of
# firmware locations on disk. Since the user helper does similar work,
# we reset the custom load directory to a location the user helper doesn't
# know so we can be sure we're not accidentally testing the user helper.
set -e
TEST_REQS_FW_SYSFS_FALLBACK="no"
TEST_REQS_FW_SET_CUSTOM_PATH="yes"
TEST_DIR=$(dirname $0)
source $TEST_DIR/fw_lib.sh
check_mods
check_setup
verify_reqs
setup_tmp_file
trap "test_finish" EXIT
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
# Turn down the timeout so failures don't take so long.
echo 1 >/sys/class/firmware/timeout
fi
if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
echo "$0: empty filename should not succeed" >&2
exit 1
fi
if [ ! -e "$DIR"/trigger_async_request ]; then
echo "$0: empty filename: async trigger not present, ignoring test" >&2
exit $ksft_skip
else
if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
echo "$0: empty filename should not succeed (async)" >&2
exit 1
fi
fi
# Request a firmware that doesn't exist, it should fail.
if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
echo "$0: firmware shouldn't have loaded" >&2
exit 1
fi
if diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not expected to match" >&2
exit 1
else
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
echo "$0: timeout works"
fi
fi
# This should succeed via kernel load or will fail after 1 second after
# being handed over to the user helper, which won't find the fw either.
if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
echo "$0: could not trigger request" >&2
exit 1
fi
# Verify the contents are what we expect.
if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded" >&2
exit 1
else
echo "$0: filesystem loading works"
fi
# Try the asynchronous version too
if [ ! -e "$DIR"/trigger_async_request ]; then
echo "$0: firmware loading: async trigger not present, ignoring test" >&2
exit $ksft_skip
else
if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
echo "$0: could not trigger async request" >&2
exit 1
fi
# Verify the contents are what we expect.
if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
echo "$0: firmware was not loaded (async)" >&2
exit 1
else
echo "$0: async filesystem loading works"
fi
fi
# Try platform (EFI embedded fw) loading too
if [ ! -e "$DIR"/trigger_request_platform ]; then
echo "$0: firmware loading: platform trigger not present, ignoring test" >&2
else
if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then
echo "$0: empty filename should not succeed (platform)" >&2
exit 1
fi
# Note we echo a non-existing name, since files on the file-system
# are preferred over firmware embedded inside the platform's firmware
# The test adds a fake entry with the requested name to the platform's
# fw list, so the name does not matter as long as it does not exist
if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then
echo "$0: could not trigger request platform" >&2
exit 1
fi
# The test verifies itself that the loaded firmware contents matches
# the contents for the fake platform fw entry it added.
echo "$0: platform loading works"
fi
### Batched requests tests
test_config_present()
{
if [ ! -f $DIR/reset ]; then
echo "Configuration triggers not present, ignoring test"
exit $ksft_skip
fi
}
# Defaults :
#
# send_uevent: 1
# sync_direct: 0
# name: test-firmware.bin
# num_requests: 4
config_reset()
{
echo 1 > $DIR/reset
}
release_all_firmware()
{
echo 1 > $DIR/release_all_firmware
}
config_set_name()
{
echo -n $1 > $DIR/config_name
}
config_set_into_buf()
{
echo 1 > $DIR/config_into_buf
}
config_unset_into_buf()
{
echo 0 > $DIR/config_into_buf
}
config_set_sync_direct()
{
echo 1 > $DIR/config_sync_direct
}
config_unset_sync_direct()
{
echo 0 > $DIR/config_sync_direct
}
config_set_uevent()
{
echo 1 > $DIR/config_send_uevent
}
config_unset_uevent()
{
echo 0 > $DIR/config_send_uevent
}
config_trigger_sync()
{
echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
}
config_trigger_async()
{
echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
}
config_set_read_fw_idx()
{
echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
}
read_firmwares()
{
if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
fwfile="$FW_INTO_BUF"
else
fwfile="$FW"
fi
if [ "$1" = "xzonly" ]; then
fwfile="${fwfile}-orig"
fi
for i in $(seq 0 3); do
config_set_read_fw_idx $i
# Verify the contents are what we expect.
# -Z required for now -- check for yourself, md5sum
# on $FW and DIR/read_firmware will yield the same. Even
# cmp agrees, so something is off.
if ! diff -q -Z "$fwfile" $DIR/read_firmware 2>/dev/null ; then
echo "request #$i: firmware was not loaded" >&2
exit 1
fi
done
}
read_firmwares_expect_nofile()
{
for i in $(seq 0 3); do
config_set_read_fw_idx $i
# Ensures contents differ
if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
echo "request $i: file was not expected to match" >&2
exit 1
fi
done
}
test_batched_request_firmware_nofile()
{
echo -n "Batched request_firmware() nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_trigger_sync
read_firmwares_expect_nofile
release_all_firmware
echo "OK"
}
test_batched_request_firmware_into_buf_nofile()
{
echo -n "Batched request_firmware_into_buf() nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_set_into_buf
config_trigger_sync
read_firmwares_expect_nofile
release_all_firmware
echo "OK"
}
test_batched_request_firmware_direct_nofile()
{
echo -n "Batched request_firmware_direct() nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_set_sync_direct
config_trigger_sync
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_uevent_nofile()
{
echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
config_reset
config_set_name nope-test-firmware.bin
config_trigger_async
release_all_firmware
echo "OK"
}
test_wait_and_cancel_custom_load()
{
if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
return
fi
local timeout=10
name=$1
while [ ! -e "$DIR"/"$name"/loading ]; do
sleep 0.1
timeout=$(( $timeout - 1 ))
if [ "$timeout" -eq 0 ]; then
echo "firmware interface never appeared:" >&2
echo "$DIR/$name/loading" >&2
exit 1
fi
done
echo -1 >"$DIR"/"$name"/loading
}
test_request_firmware_nowait_custom_nofile()
{
echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
config_reset
config_unset_uevent
RANDOM_FILE_PATH=$(setup_random_file_fake)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
config_set_name $RANDOM_FILE
config_trigger_async &
test_wait_and_cancel_custom_load $RANDOM_FILE
wait
release_all_firmware
echo "OK"
}
test_batched_request_firmware()
{
echo -n "Batched request_firmware() $2 try #$1: "
config_reset
config_trigger_sync
read_firmwares $2
release_all_firmware
echo "OK"
}
test_batched_request_firmware_into_buf()
{
echo -n "Batched request_firmware_into_buf() $2 try #$1: "
config_reset
config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
config_set_into_buf
config_trigger_sync
read_firmwares $2
release_all_firmware
echo "OK"
}
test_batched_request_firmware_direct()
{
echo -n "Batched request_firmware_direct() $2 try #$1: "
config_reset
config_set_sync_direct
config_trigger_sync
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_uevent()
{
echo -n "Batched request_firmware_nowait(uevent=true) $2 try #$1: "
config_reset
config_trigger_async
release_all_firmware
echo "OK"
}
test_request_firmware_nowait_custom()
{
echo -n "Batched request_firmware_nowait(uevent=false) $2 try #$1: "
config_reset
config_unset_uevent
RANDOM_FILE_PATH=$(setup_random_file)
RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
if [ "$2" = "both" ]; then
xz -9 -C crc32 -k $RANDOM_FILE_PATH
elif [ "$2" = "xzonly" ]; then
xz -9 -C crc32 $RANDOM_FILE_PATH
fi
config_set_name $RANDOM_FILE
config_trigger_async
release_all_firmware
echo "OK"
}
# Only continue if batched request triggers are present on the
# test-firmware driver
test_config_present
# test with the file present
echo
echo "Testing with the file present..."
for i in $(seq 1 5); do
test_batched_request_firmware $i normal
done
for i in $(seq 1 5); do
test_batched_request_firmware_into_buf $i normal
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct $i normal
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent $i normal
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom $i normal
done
# Test for file not found, errors are expected, the failure would be
# a hung task, which would require a hard reset.
echo
echo "Testing with the file missing..."
for i in $(seq 1 5); do
test_batched_request_firmware_nofile $i
done
for i in $(seq 1 5); do
test_batched_request_firmware_into_buf_nofile $i
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct_nofile $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent_nofile $i
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom_nofile $i
done
test "$HAS_FW_LOADER_COMPRESS" != "yes" && exit 0
# test with both files present
xz -9 -C crc32 -k $FW
config_set_name $NAME
echo
echo "Testing with both plain and xz files present..."
for i in $(seq 1 5); do
test_batched_request_firmware $i both
done
for i in $(seq 1 5); do
test_batched_request_firmware_into_buf $i both
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct $i both
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent $i both
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom $i both
done
# test with only xz file present
mv "$FW" "${FW}-orig"
echo
echo "Testing with only xz file present..."
for i in $(seq 1 5); do
test_batched_request_firmware $i xzonly
done
for i in $(seq 1 5); do
test_batched_request_firmware_into_buf $i xzonly
done
for i in $(seq 1 5); do
test_batched_request_firmware_direct $i xzonly
done
for i in $(seq 1 5); do
test_request_firmware_nowait_uevent $i xzonly
done
for i in $(seq 1 5); do
test_request_firmware_nowait_custom $i xzonly
done
exit 0