| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| |
| #include <soc/tegra/fuse.h> |
| |
| #include "xusb.h" |
| |
| /* FUSE USB_CALIB registers */ |
| #define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0) |
| #define HS_CURR_LEVEL_PAD_MASK 0x3f |
| #define HS_TERM_RANGE_ADJ_SHIFT 7 |
| #define HS_TERM_RANGE_ADJ_MASK 0xf |
| #define HS_SQUELCH_SHIFT 29 |
| #define HS_SQUELCH_MASK 0x7 |
| |
| #define RPD_CTRL_SHIFT 0 |
| #define RPD_CTRL_MASK 0x1f |
| |
| /* XUSB PADCTL registers */ |
| #define XUSB_PADCTL_USB2_PAD_MUX 0x4 |
| #define USB2_PORT_SHIFT(x) ((x) * 2) |
| #define USB2_PORT_MASK 0x3 |
| #define PORT_XUSB 1 |
| #define HSIC_PORT_SHIFT(x) ((x) + 20) |
| #define HSIC_PORT_MASK 0x1 |
| #define PORT_HSIC 0 |
| |
| #define XUSB_PADCTL_USB2_PORT_CAP 0x8 |
| #define XUSB_PADCTL_SS_PORT_CAP 0xc |
| #define PORTX_CAP_SHIFT(x) ((x) * 4) |
| #define PORT_CAP_MASK 0x3 |
| #define PORT_CAP_DISABLED 0x0 |
| #define PORT_CAP_HOST 0x1 |
| #define PORT_CAP_DEVICE 0x2 |
| #define PORT_CAP_OTG 0x3 |
| |
| #define XUSB_PADCTL_ELPG_PROGRAM 0x20 |
| #define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT(x) |
| #define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7) |
| #define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14) |
| #define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21) |
| #define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28) |
| #define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30) |
| #define ALL_WAKE_EVENTS \ |
| (USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \ |
| USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) | \ |
| SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) | \ |
| USB2_HSIC_PORT_WAKEUP_EVENT(0)) |
| |
| #define XUSB_PADCTL_ELPG_PROGRAM_1 0x24 |
| #define SSPX_ELPG_CLAMP_EN(x) BIT(0 + (x) * 3) |
| #define SSPX_ELPG_CLAMP_EN_EARLY(x) BIT(1 + (x) * 3) |
| #define SSPX_ELPG_VCORE_DOWN(x) BIT(2 + (x) * 3) |
| |
| #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40) |
| #define HS_CURR_LEVEL(x) ((x) & 0x3f) |
| #define TERM_SEL BIT(25) |
| #define USB2_OTG_PD BIT(26) |
| #define USB2_OTG_PD2 BIT(27) |
| #define USB2_OTG_PD2_OVRD_EN BIT(28) |
| #define USB2_OTG_PD_ZI BIT(29) |
| |
| #define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x8c + (x) * 0x40) |
| #define USB2_OTG_PD_DR BIT(2) |
| #define TERM_RANGE_ADJ(x) (((x) & 0xf) << 3) |
| #define RPD_CTRL(x) (((x) & 0x1f) << 26) |
| |
| #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284 |
| #define BIAS_PAD_PD BIT(11) |
| #define HS_SQUELCH_LEVEL(x) (((x) & 0x7) << 0) |
| |
| #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288 |
| #define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12) |
| #define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19) |
| #define USB2_PD_TRK BIT(26) |
| |
| #define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20) |
| #define HSIC_PD_TX_DATA0 BIT(1) |
| #define HSIC_PD_TX_STROBE BIT(3) |
| #define HSIC_PD_RX_DATA0 BIT(4) |
| #define HSIC_PD_RX_STROBE BIT(6) |
| #define HSIC_PD_ZI_DATA0 BIT(7) |
| #define HSIC_PD_ZI_STROBE BIT(9) |
| #define HSIC_RPD_DATA0 BIT(13) |
| #define HSIC_RPD_STROBE BIT(15) |
| #define HSIC_RPU_DATA0 BIT(16) |
| #define HSIC_RPU_STROBE BIT(18) |
| |
| #define XUSB_PADCTL_HSIC_PAD_TRK_CTL0 0x340 |
| #define HSIC_TRK_START_TIMER(x) (((x) & 0x7f) << 5) |
| #define HSIC_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 12) |
| #define HSIC_PD_TRK BIT(19) |
| |
| #define USB2_VBUS_ID 0x360 |
| #define VBUS_OVERRIDE BIT(14) |
| #define ID_OVERRIDE(x) (((x) & 0xf) << 18) |
| #define ID_OVERRIDE_FLOATING ID_OVERRIDE(8) |
| #define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0) |
| |
| #define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \ |
| { \ |
| .name = _name, \ |
| .offset = _offset, \ |
| .shift = _shift, \ |
| .mask = _mask, \ |
| .num_funcs = ARRAY_SIZE(tegra186_##_type##_functions), \ |
| .funcs = tegra186_##_type##_functions, \ |
| } |
| |
| struct tegra_xusb_fuse_calibration { |
| u32 *hs_curr_level; |
| u32 hs_squelch; |
| u32 hs_term_range_adj; |
| u32 rpd_ctrl; |
| }; |
| |
| struct tegra186_xusb_padctl { |
| struct tegra_xusb_padctl base; |
| |
| struct tegra_xusb_fuse_calibration calib; |
| |
| /* UTMI bias and tracking */ |
| struct clk *usb2_trk_clk; |
| unsigned int bias_pad_enable; |
| }; |
| |
| static inline struct tegra186_xusb_padctl * |
| to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl) |
| { |
| return container_of(padctl, struct tegra186_xusb_padctl, base); |
| } |
| |
| /* USB 2.0 UTMI PHY support */ |
| static struct tegra_xusb_lane * |
| tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np, |
| unsigned int index) |
| { |
| struct tegra_xusb_usb2_lane *usb2; |
| int err; |
| |
| usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); |
| if (!usb2) |
| return ERR_PTR(-ENOMEM); |
| |
| INIT_LIST_HEAD(&usb2->base.list); |
| usb2->base.soc = &pad->soc->lanes[index]; |
| usb2->base.index = index; |
| usb2->base.pad = pad; |
| usb2->base.np = np; |
| |
| err = tegra_xusb_lane_parse_dt(&usb2->base, np); |
| if (err < 0) { |
| kfree(usb2); |
| return ERR_PTR(err); |
| } |
| |
| return &usb2->base; |
| } |
| |
| static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane) |
| { |
| struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane); |
| |
| kfree(usb2); |
| } |
| |
| static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = { |
| .probe = tegra186_usb2_lane_probe, |
| .remove = tegra186_usb2_lane_remove, |
| }; |
| |
| static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) |
| { |
| struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); |
| struct device *dev = padctl->dev; |
| u32 value; |
| int err; |
| |
| mutex_lock(&padctl->lock); |
| |
| if (priv->bias_pad_enable++ > 0) { |
| mutex_unlock(&padctl->lock); |
| return; |
| } |
| |
| err = clk_prepare_enable(priv->usb2_trk_clk); |
| if (err < 0) |
| dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| value &= ~USB2_TRK_START_TIMER(~0); |
| value |= USB2_TRK_START_TIMER(0x1e); |
| value &= ~USB2_TRK_DONE_RESET_TIMER(~0); |
| value |= USB2_TRK_DONE_RESET_TIMER(0xa); |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); |
| value &= ~BIAS_PAD_PD; |
| value &= ~HS_SQUELCH_LEVEL(~0); |
| value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch); |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); |
| |
| udelay(1); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| value &= ~USB2_PD_TRK; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| |
| mutex_unlock(&padctl->lock); |
| } |
| |
| static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) |
| { |
| struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); |
| u32 value; |
| |
| mutex_lock(&padctl->lock); |
| |
| if (WARN_ON(priv->bias_pad_enable == 0)) { |
| mutex_unlock(&padctl->lock); |
| return; |
| } |
| |
| if (--priv->bias_pad_enable > 0) { |
| mutex_unlock(&padctl->lock); |
| return; |
| } |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| value |= USB2_PD_TRK; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); |
| |
| clk_disable_unprepare(priv->usb2_trk_clk); |
| |
| mutex_unlock(&padctl->lock); |
| } |
| |
| static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra_xusb_usb2_port *port; |
| struct device *dev = padctl->dev; |
| unsigned int index = lane->index; |
| u32 value; |
| |
| if (!phy) |
| return; |
| |
| port = tegra_xusb_find_usb2_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB2 lane %u\n", index); |
| return; |
| } |
| |
| tegra186_utmi_bias_pad_power_on(padctl); |
| |
| udelay(2); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| value &= ~USB2_OTG_PD; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| value &= ~USB2_OTG_PD_DR; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| } |
| |
| static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| unsigned int index = lane->index; |
| u32 value; |
| |
| if (!phy) |
| return; |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| value |= USB2_OTG_PD; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| value |= USB2_OTG_PD_DR; |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| |
| udelay(2); |
| |
| tegra186_utmi_bias_pad_power_off(padctl); |
| } |
| |
| static int tegra186_utmi_phy_power_on(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); |
| struct tegra_xusb_usb2_port *port; |
| unsigned int index = lane->index; |
| struct device *dev = padctl->dev; |
| u32 value; |
| |
| port = tegra_xusb_find_usb2_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB2 lane %u\n", index); |
| return -ENODEV; |
| } |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX); |
| value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index)); |
| value |= (PORT_XUSB << USB2_PORT_SHIFT(index)); |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP); |
| value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index)); |
| |
| if (port->mode == USB_DR_MODE_UNKNOWN) |
| value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index)); |
| else if (port->mode == USB_DR_MODE_PERIPHERAL) |
| value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index)); |
| else if (port->mode == USB_DR_MODE_HOST) |
| value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index)); |
| else if (port->mode == USB_DR_MODE_OTG) |
| value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index)); |
| |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| value &= ~USB2_OTG_PD_ZI; |
| value |= TERM_SEL; |
| value &= ~HS_CURR_LEVEL(~0); |
| |
| if (usb2->hs_curr_level_offset) { |
| int hs_current_level; |
| |
| hs_current_level = (int)priv->calib.hs_curr_level[index] + |
| usb2->hs_curr_level_offset; |
| |
| if (hs_current_level < 0) |
| hs_current_level = 0; |
| if (hs_current_level > 0x3f) |
| hs_current_level = 0x3f; |
| |
| value |= HS_CURR_LEVEL(hs_current_level); |
| } else { |
| value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]); |
| } |
| |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| value &= ~TERM_RANGE_ADJ(~0); |
| value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj); |
| value &= ~RPD_CTRL(~0); |
| value |= RPD_CTRL(priv->calib.rpd_ctrl); |
| padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); |
| |
| /* TODO: pad power saving */ |
| tegra_phy_xusb_utmi_pad_power_on(phy); |
| return 0; |
| } |
| |
| static int tegra186_utmi_phy_power_off(struct phy *phy) |
| { |
| /* TODO: pad power saving */ |
| tegra_phy_xusb_utmi_pad_power_down(phy); |
| |
| return 0; |
| } |
| |
| static int tegra186_utmi_phy_init(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra_xusb_usb2_port *port; |
| unsigned int index = lane->index; |
| struct device *dev = padctl->dev; |
| int err; |
| |
| port = tegra_xusb_find_usb2_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB2 lane %u\n", index); |
| return -ENODEV; |
| } |
| |
| if (port->supply && port->mode == USB_DR_MODE_HOST) { |
| err = regulator_enable(port->supply); |
| if (err) { |
| dev_err(dev, "failed to enable port %u VBUS: %d\n", |
| index, err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int tegra186_utmi_phy_exit(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra_xusb_usb2_port *port; |
| unsigned int index = lane->index; |
| struct device *dev = padctl->dev; |
| int err; |
| |
| port = tegra_xusb_find_usb2_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB2 lane %u\n", index); |
| return -ENODEV; |
| } |
| |
| if (port->supply && port->mode == USB_DR_MODE_HOST) { |
| err = regulator_disable(port->supply); |
| if (err) { |
| dev_err(dev, "failed to disable port %u VBUS: %d\n", |
| index, err); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct phy_ops utmi_phy_ops = { |
| .init = tegra186_utmi_phy_init, |
| .exit = tegra186_utmi_phy_exit, |
| .power_on = tegra186_utmi_phy_power_on, |
| .power_off = tegra186_utmi_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct tegra_xusb_pad * |
| tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl, |
| const struct tegra_xusb_pad_soc *soc, |
| struct device_node *np) |
| { |
| struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); |
| struct tegra_xusb_usb2_pad *usb2; |
| struct tegra_xusb_pad *pad; |
| int err; |
| |
| usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); |
| if (!usb2) |
| return ERR_PTR(-ENOMEM); |
| |
| pad = &usb2->base; |
| pad->ops = &tegra186_usb2_lane_ops; |
| pad->soc = soc; |
| |
| err = tegra_xusb_pad_init(pad, padctl, np); |
| if (err < 0) { |
| kfree(usb2); |
| goto out; |
| } |
| |
| priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk"); |
| if (IS_ERR(priv->usb2_trk_clk)) { |
| err = PTR_ERR(priv->usb2_trk_clk); |
| dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err); |
| goto unregister; |
| } |
| |
| err = tegra_xusb_pad_register(pad, &utmi_phy_ops); |
| if (err < 0) |
| goto unregister; |
| |
| dev_set_drvdata(&pad->dev, pad); |
| |
| return pad; |
| |
| unregister: |
| device_unregister(&pad->dev); |
| out: |
| return ERR_PTR(err); |
| } |
| |
| static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad) |
| { |
| struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad); |
| |
| kfree(usb2); |
| } |
| |
| static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = { |
| .probe = tegra186_usb2_pad_probe, |
| .remove = tegra186_usb2_pad_remove, |
| }; |
| |
| static const char * const tegra186_usb2_functions[] = { |
| "xusb", |
| }; |
| |
| static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = { |
| TEGRA186_LANE("usb2-0", 0, 0, 0, usb2), |
| TEGRA186_LANE("usb2-1", 0, 0, 0, usb2), |
| TEGRA186_LANE("usb2-2", 0, 0, 0, usb2), |
| }; |
| |
| static const struct tegra_xusb_pad_soc tegra186_usb2_pad = { |
| .name = "usb2", |
| .num_lanes = ARRAY_SIZE(tegra186_usb2_lanes), |
| .lanes = tegra186_usb2_lanes, |
| .ops = &tegra186_usb2_pad_ops, |
| }; |
| |
| static int tegra186_usb2_port_enable(struct tegra_xusb_port *port) |
| { |
| return 0; |
| } |
| |
| static void tegra186_usb2_port_disable(struct tegra_xusb_port *port) |
| { |
| } |
| |
| static struct tegra_xusb_lane * |
| tegra186_usb2_port_map(struct tegra_xusb_port *port) |
| { |
| return tegra_xusb_find_lane(port->padctl, "usb2", port->index); |
| } |
| |
| static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = { |
| .enable = tegra186_usb2_port_enable, |
| .disable = tegra186_usb2_port_disable, |
| .map = tegra186_usb2_port_map, |
| }; |
| |
| /* SuperSpeed PHY support */ |
| static struct tegra_xusb_lane * |
| tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np, |
| unsigned int index) |
| { |
| struct tegra_xusb_usb3_lane *usb3; |
| int err; |
| |
| usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL); |
| if (!usb3) |
| return ERR_PTR(-ENOMEM); |
| |
| INIT_LIST_HEAD(&usb3->base.list); |
| usb3->base.soc = &pad->soc->lanes[index]; |
| usb3->base.index = index; |
| usb3->base.pad = pad; |
| usb3->base.np = np; |
| |
| err = tegra_xusb_lane_parse_dt(&usb3->base, np); |
| if (err < 0) { |
| kfree(usb3); |
| return ERR_PTR(err); |
| } |
| |
| return &usb3->base; |
| } |
| |
| static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane) |
| { |
| struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane); |
| |
| kfree(usb3); |
| } |
| |
| static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = { |
| .probe = tegra186_usb3_lane_probe, |
| .remove = tegra186_usb3_lane_remove, |
| }; |
| static int tegra186_usb3_port_enable(struct tegra_xusb_port *port) |
| { |
| return 0; |
| } |
| |
| static void tegra186_usb3_port_disable(struct tegra_xusb_port *port) |
| { |
| } |
| |
| static struct tegra_xusb_lane * |
| tegra186_usb3_port_map(struct tegra_xusb_port *port) |
| { |
| return tegra_xusb_find_lane(port->padctl, "usb3", port->index); |
| } |
| |
| static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = { |
| .enable = tegra186_usb3_port_enable, |
| .disable = tegra186_usb3_port_disable, |
| .map = tegra186_usb3_port_map, |
| }; |
| |
| static int tegra186_usb3_phy_power_on(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra_xusb_usb3_port *port; |
| struct tegra_xusb_usb2_port *usb2; |
| unsigned int index = lane->index; |
| struct device *dev = padctl->dev; |
| u32 value; |
| |
| port = tegra_xusb_find_usb3_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB3 lane %u\n", index); |
| return -ENODEV; |
| } |
| |
| usb2 = tegra_xusb_find_usb2_port(padctl, port->port); |
| if (!usb2) { |
| dev_err(dev, "no companion port found for USB3 lane %u\n", |
| index); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&padctl->lock); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP); |
| value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index)); |
| |
| if (usb2->mode == USB_DR_MODE_UNKNOWN) |
| value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index)); |
| else if (usb2->mode == USB_DR_MODE_PERIPHERAL) |
| value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index)); |
| else if (usb2->mode == USB_DR_MODE_HOST) |
| value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index)); |
| else if (usb2->mode == USB_DR_MODE_OTG) |
| value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index)); |
| |
| padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value &= ~SSPX_ELPG_VCORE_DOWN(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| usleep_range(100, 200); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| usleep_range(100, 200); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value &= ~SSPX_ELPG_CLAMP_EN(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| mutex_unlock(&padctl->lock); |
| |
| return 0; |
| } |
| |
| static int tegra186_usb3_phy_power_off(struct phy *phy) |
| { |
| struct tegra_xusb_lane *lane = phy_get_drvdata(phy); |
| struct tegra_xusb_padctl *padctl = lane->pad->padctl; |
| struct tegra_xusb_usb3_port *port; |
| unsigned int index = lane->index; |
| struct device *dev = padctl->dev; |
| u32 value; |
| |
| port = tegra_xusb_find_usb3_port(padctl, index); |
| if (!port) { |
| dev_err(dev, "no port found for USB3 lane %u\n", index); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&padctl->lock); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value |= SSPX_ELPG_CLAMP_EN_EARLY(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| usleep_range(100, 200); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value |= SSPX_ELPG_CLAMP_EN(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| usleep_range(250, 350); |
| |
| value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); |
| value |= SSPX_ELPG_VCORE_DOWN(index); |
| padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); |
| |
| mutex_unlock(&padctl->lock); |
| |
| return 0; |
| } |
| |
| static int tegra186_usb3_phy_init(struct phy *phy) |
| { |
| return 0; |
| } |
| |
| static int tegra186_usb3_phy_exit(struct phy *phy) |
| { |
| return 0; |
| } |
| |
| static const struct phy_ops usb3_phy_ops = { |
| .init = tegra186_usb3_phy_init, |
| .exit = tegra186_usb3_phy_exit, |
| .power_on = tegra186_usb3_phy_power_on, |
| .power_off = tegra186_usb3_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct tegra_xusb_pad * |
| tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl, |
| const struct tegra_xusb_pad_soc *soc, |
| struct device_node *np) |
| { |
| struct tegra_xusb_usb3_pad *usb3; |
| struct tegra_xusb_pad *pad; |
| int err; |
| |
| usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL); |
| if (!usb3) |
| return ERR_PTR(-ENOMEM); |
| |
| pad = &usb3->base; |
| pad->ops = &tegra186_usb3_lane_ops; |
| pad->soc = soc; |
| |
| err = tegra_xusb_pad_init(pad, padctl, np); |
| if (err < 0) { |
| kfree(usb3); |
| goto out; |
| } |
| |
| err = tegra_xusb_pad_register(pad, &usb3_phy_ops); |
| if (err < 0) |
| goto unregister; |
| |
| dev_set_drvdata(&pad->dev, pad); |
| |
| return pad; |
| |
| unregister: |
| device_unregister(&pad->dev); |
| out: |
| return ERR_PTR(err); |
| } |
| |
| static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad) |
| { |
| struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad); |
| |
| kfree(usb2); |
| } |
| |
| static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = { |
| .probe = tegra186_usb3_pad_probe, |
| .remove = tegra186_usb3_pad_remove, |
| }; |
| |
| static const char * const tegra186_usb3_functions[] = { |
| "xusb", |
| }; |
| |
| static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = { |
| TEGRA186_LANE("usb3-0", 0, 0, 0, usb3), |
| TEGRA186_LANE("usb3-1", 0, 0, 0, usb3), |
| TEGRA186_LANE("usb3-2", 0, 0, 0, usb3), |
| }; |
| |
| static const struct tegra_xusb_pad_soc tegra186_usb3_pad = { |
| .name = "usb3", |
| .num_lanes = ARRAY_SIZE(tegra186_usb3_lanes), |
| .lanes = tegra186_usb3_lanes, |
| .ops = &tegra186_usb3_pad_ops, |
| }; |
| |
| static const struct tegra_xusb_pad_soc * const tegra186_pads[] = { |
| &tegra186_usb2_pad, |
| &tegra186_usb3_pad, |
| #if 0 /* TODO implement */ |
| &tegra186_hsic_pad, |
| #endif |
| }; |
| |
| static int |
| tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl) |
| { |
| struct device *dev = padctl->base.dev; |
| unsigned int i, count; |
| u32 value, *level; |
| int err; |
| |
| count = padctl->base.soc->ports.usb2.count; |
| |
| level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL); |
| if (!level) |
| return -ENOMEM; |
| |
| err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value); |
| if (err) { |
| dev_err(dev, "failed to read calibration fuse: %d\n", err); |
| return err; |
| } |
| |
| dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value); |
| |
| for (i = 0; i < count; i++) |
| level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) & |
| HS_CURR_LEVEL_PAD_MASK; |
| |
| padctl->calib.hs_curr_level = level; |
| |
| padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) & |
| HS_SQUELCH_MASK; |
| padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) & |
| HS_TERM_RANGE_ADJ_MASK; |
| |
| err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value); |
| if (err) { |
| dev_err(dev, "failed to read calibration fuse: %d\n", err); |
| return err; |
| } |
| |
| dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value); |
| |
| padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK; |
| |
| return 0; |
| } |
| |
| static struct tegra_xusb_padctl * |
| tegra186_xusb_padctl_probe(struct device *dev, |
| const struct tegra_xusb_padctl_soc *soc) |
| { |
| struct tegra186_xusb_padctl *priv; |
| int err; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return ERR_PTR(-ENOMEM); |
| |
| priv->base.dev = dev; |
| priv->base.soc = soc; |
| |
| err = tegra186_xusb_read_fuse_calibration(priv); |
| if (err < 0) |
| return ERR_PTR(err); |
| |
| return &priv->base; |
| } |
| |
| static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl) |
| { |
| } |
| |
| static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = { |
| .probe = tegra186_xusb_padctl_probe, |
| .remove = tegra186_xusb_padctl_remove, |
| }; |
| |
| static const char * const tegra186_xusb_padctl_supply_names[] = { |
| "avdd-pll-erefeut", |
| "avdd-usb", |
| "vclamp-usb", |
| "vddio-hsic", |
| }; |
| |
| const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = { |
| .num_pads = ARRAY_SIZE(tegra186_pads), |
| .pads = tegra186_pads, |
| .ports = { |
| .usb2 = { |
| .ops = &tegra186_usb2_port_ops, |
| .count = 3, |
| }, |
| #if 0 /* TODO implement */ |
| .hsic = { |
| .ops = &tegra186_hsic_port_ops, |
| .count = 1, |
| }, |
| #endif |
| .usb3 = { |
| .ops = &tegra186_usb3_port_ops, |
| .count = 3, |
| }, |
| }, |
| .ops = &tegra186_xusb_padctl_ops, |
| .supply_names = tegra186_xusb_padctl_supply_names, |
| .num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names), |
| }; |
| EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc); |
| |
| MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>"); |
| MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver"); |
| MODULE_LICENSE("GPL v2"); |