blob: 11fda9eb2466651cc53d560ec4ff740086928ea1 [file] [log] [blame]
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
menu "Firmware Drivers"
config ARM_SCMI_PROTOCOL
bool "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
depends on MAILBOX
help
ARM System Control and Management Interface (SCMI) protocol is a
set of operating system-independent software interfaces that are
used in system management. SCMI is extensible and currently provides
interfaces for: Discovery and self-description of the interfaces
it supports, Power domain management which is the ability to place
a given device or domain into the various power-saving states that
it supports, Performance management which is the ability to control
the performance of a domain that is composed of compute engines
such as application processors and other accelerators, Clock
management which is the ability to set and inquire rates on platform
managed clocks and Sensor management which is the ability to read
sensor data, and be notified of sensor value.
This protocol library provides interface for all the client drivers
making use of the features offered by the SCMI.
config ARM_SCMI_POWER_DOMAIN
tristate "SCMI power domain driver"
depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
default y
select PM_GENERIC_DOMAINS if PM
help
This enables support for the SCMI power domains which can be
enabled or disabled via the SCP firmware
This driver can also be built as a module. If so, the module
will be called scmi_pm_domain. Note this may needed early in boot
before rootfs may be available.
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
depends on MAILBOX
help
System Control and Power Interface (SCPI) Message Protocol is
defined for the purpose of communication between the Application
Cores(AP) and the System Control Processor(SCP). The MHU peripheral
provides a mechanism for inter-processor communication between SCP
and AP.
SCP controls most of the power managament on the Application
Processors. It offers control and management of: the core/cluster
power states, various power domain DVFS including the core/cluster,
certain system clocks configuration, thermal sensors and many
others.
This protocol library provides interface for all the client drivers
making use of the features offered by the SCP.
config ARM_SCPI_POWER_DOMAIN
tristate "SCPI power domain driver"
depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
default y
select PM_GENERIC_DOMAINS if PM
help
This enables support for the SCPI power domains which can be
enabled or disabled via the SCP firmware
config ARM_SDE_INTERFACE
bool "ARM Software Delegated Exception Interface (SDEI)"
depends on ARM64
help
The Software Delegated Exception Interface (SDEI) is an ARM
standard for registering callbacks from the platform firmware
into the OS. This is typically used to implement RAS notifications.
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
help
Say Y or M here if you want to enable BIOS Enhanced Disk Drive
Services real mode BIOS calls to determine which disk
BIOS tries boot from. This information is then exported via sysfs.
This option is experimental and is known to fail to boot on some
obscure configurations. Most disk controller BIOS vendors do
not yet implement this feature.
config EDD_OFF
bool "Sets default behavior for EDD detection to off"
depends on EDD
default n
help
Say Y if you want EDD disabled by default, even though it is compiled into the
kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
using the kernel parameter 'edd={on|skipmbr|off}'.
config FIRMWARE_MEMMAP
bool "Add firmware-provided memory map to sysfs" if EXPERT
default X86
help
Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
That memory map is used for example by kexec to set up parameter area
for the next kernel, but can also be used for debugging purposes.
See also Documentation/ABI/testing/sysfs-firmware-memmap.
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
depends on ACPI && EFI && IA64
default y if IA64
help
If your firmware supplies the PCDP table, and you want to
automatically use the primary console device it describes
as the Linux console, say Y here.
If your firmware supplies the HCDP table, and you want to
use the first serial port it describes as the Linux console,
say Y here. If your EFI ConOut path contains only a UART
device, it will become the console automatically. Otherwise,
you must specify the "console=hcdp" kernel boot argument.
Neither the PCDP nor the HCDP affects naming of serial devices,
so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
on how the driver discovers devices.
You must also enable the appropriate drivers (serial, VGA, etc.)
See DIG64_HCDPv20_042804.pdf available from
<http://www.dig64.org/specifications/>
config DMIID
bool "Export DMI identification via sysfs to userspace"
depends on DMI
default y
help
Say Y here if you want to query SMBIOS/DMI system identification
information from userspace through /sys/class/dmi/id/ or if you want
DMI-based module auto-loading.
config DMI_SYSFS
tristate "DMI table support in sysfs"
depends on SYSFS && DMI
default n
help
Say Y or M here to enable the exporting of the raw DMI table
data via sysfs. This is useful for consuming the data without
requiring any access to /dev/mem at all. Tables are found
under /sys/firmware/dmi when this option is enabled and
loaded.
config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
bool
config ISCSI_IBFT_FIND
bool "iSCSI Boot Firmware Table Attributes"
depends on X86 && ACPI
default n
help
This option enables the kernel to find the region of memory
in which the ISCSI Boot Firmware Table (iBFT) resides. This
is necessary for iSCSI Boot Firmware Table Attributes module to work
properly.
config ISCSI_IBFT
tristate "iSCSI Boot Firmware Table Attributes module"
select ISCSI_BOOT_SYSFS
depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL
default n
help
This option enables support for detection and exposing of iSCSI
Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
detect iSCSI boot parameters dynamically during system boot, say Y.
Otherwise, say N.
config RASPBERRYPI_FIRMWARE
tristate "Raspberry Pi Firmware Driver"
depends on BCM2835_MBOX
help
This option enables support for communicating with the firmware on the
Raspberry Pi.
config FW_CFG_SYSFS
tristate "QEMU fw_cfg device support in sysfs"
depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86)
depends on HAS_IOPORT_MAP
default n
help
Say Y or M here to enable the exporting of the QEMU firmware
configuration (fw_cfg) file entries via sysfs. Entries are
found under /sys/firmware/fw_cfg when this option is enabled
and loaded.
config FW_CFG_SYSFS_CMDLINE
bool "QEMU fw_cfg device parameter parsing"
depends on FW_CFG_SYSFS
help
Allow the qemu_fw_cfg device to be initialized via the kernel
command line or using a module parameter.
WARNING: Using incorrect parameters (base address in particular)
may crash your system.
config INTEL_STRATIX10_SERVICE
tristate "Intel Stratix10 Service Layer"
depends on ARCH_STRATIX10 && HAVE_ARM_SMCCC
default n
help
Intel Stratix10 service layer runs at privileged exception level,
interfaces with the service providers (FPGA manager is one of them)
and manages secure monitor call to communicate with secure monitor
software at secure monitor exception level.
Say Y here if you want Stratix10 service layer support.
config QCOM_SCM
bool
depends on ARM || ARM64
select RESET_CONTROLLER
config QCOM_SCM_32
def_bool y
depends on QCOM_SCM && ARM
config QCOM_SCM_64
def_bool y
depends on QCOM_SCM && ARM64
config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
bool "Qualcomm download mode enabled by default"
depends on QCOM_SCM
help
A device with "download mode" enabled will upon an unexpected
warm-restart enter a special debug mode that allows the user to
"download" memory content over USB for offline postmortem analysis.
The feature can be enabled/disabled on the kernel command line.
Say Y here to enable "download mode" by default.
config TI_SCI_PROTOCOL
tristate "TI System Control Interface (TISCI) Message Protocol"
depends on TI_MESSAGE_MANAGER
help
TI System Control Interface (TISCI) Message Protocol is used to manage
compute systems such as ARM, DSP etc with the system controller in
complex System on Chip(SoC) such as those found on certain keystone
generation SoC from TI.
System controller provides various facilities including power
management function support.
This protocol library is used by client drivers to use the features
provided by the system controller.
config TRUSTED_FOUNDATIONS
bool "Trusted Foundations secure monitor support"
depends on ARM
help
Some devices (including most early Tegra-based consumer devices on
the market) are booted with the Trusted Foundations secure monitor
active, requiring some core operations to be performed by the secure
monitor instead of the kernel.
This option allows the kernel to invoke the secure monitor whenever
required on devices using Trusted Foundations. See the functions and
comments in linux/firmware/trusted_foundations.h or the device tree
bindings for "tlm,trusted-foundations" for details on how to use it.
Choose N if you don't know what this is about.
config HAVE_ARM_SMCCC
bool
source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
source "drivers/firmware/imx/Kconfig"
source "drivers/firmware/meson/Kconfig"
source "drivers/firmware/tegra/Kconfig"
source "drivers/firmware/xilinx/Kconfig"
endmenu