|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Support routines for initializing a PCI subsystem | 
|  | * | 
|  | * Extruded from code written by | 
|  | *      Dave Rusling (david.rusling@reo.mts.dec.com) | 
|  | *      David Mosberger (davidm@cs.arizona.edu) | 
|  | *	David Miller (davem@redhat.com) | 
|  | * | 
|  | * Fixed for multiple PCI buses, 1999 Andrea Arcangeli <andrea@suse.de> | 
|  | * | 
|  | * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru> | 
|  | *	     Resource sorting | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/cache.h> | 
|  | #include <linux/slab.h> | 
|  | #include "pci.h" | 
|  |  | 
|  | static void pci_std_update_resource(struct pci_dev *dev, int resno) | 
|  | { | 
|  | struct pci_bus_region region; | 
|  | bool disable; | 
|  | u16 cmd; | 
|  | u32 new, check, mask; | 
|  | int reg; | 
|  | struct resource *res = dev->resource + resno; | 
|  | const char *res_name = pci_resource_name(dev, resno); | 
|  |  | 
|  | /* Per SR-IOV spec 3.4.1.11, VF BARs are RO zero */ | 
|  | if (dev->is_virtfn) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Ignore resources for unimplemented BARs and unused resource slots | 
|  | * for 64 bit BARs. | 
|  | */ | 
|  | if (!res->flags) | 
|  | return; | 
|  |  | 
|  | if (res->flags & IORESOURCE_UNSET) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Ignore non-moveable resources.  This might be legacy resources for | 
|  | * which no functional BAR register exists or another important | 
|  | * system resource we shouldn't move around. | 
|  | */ | 
|  | if (res->flags & IORESOURCE_PCI_FIXED) | 
|  | return; | 
|  |  | 
|  | pcibios_resource_to_bus(dev->bus, ®ion, res); | 
|  | new = region.start; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) { | 
|  | mask = (u32)PCI_BASE_ADDRESS_IO_MASK; | 
|  | new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK; | 
|  | } else if (resno == PCI_ROM_RESOURCE) { | 
|  | mask = PCI_ROM_ADDRESS_MASK; | 
|  | } else { | 
|  | mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; | 
|  | new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK; | 
|  | } | 
|  |  | 
|  | if (resno < PCI_ROM_RESOURCE) { | 
|  | reg = PCI_BASE_ADDRESS_0 + 4 * resno; | 
|  | } else if (resno == PCI_ROM_RESOURCE) { | 
|  |  | 
|  | /* | 
|  | * Apparently some Matrox devices have ROM BARs that read | 
|  | * as zero when disabled, so don't update ROM BARs unless | 
|  | * they're enabled.  See | 
|  | * https://lore.kernel.org/r/43147B3D.1030309@vc.cvut.cz/ | 
|  | * But we must update ROM BAR for buggy devices where even a | 
|  | * disabled ROM can conflict with other BARs. | 
|  | */ | 
|  | if (!(res->flags & IORESOURCE_ROM_ENABLE) && | 
|  | !dev->rom_bar_overlap) | 
|  | return; | 
|  |  | 
|  | reg = dev->rom_base_reg; | 
|  | if (res->flags & IORESOURCE_ROM_ENABLE) | 
|  | new |= PCI_ROM_ADDRESS_ENABLE; | 
|  | } else | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * We can't update a 64-bit BAR atomically, so when possible, | 
|  | * disable decoding so that a half-updated BAR won't conflict | 
|  | * with another device. | 
|  | */ | 
|  | disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on; | 
|  | if (disable) { | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, | 
|  | cmd & ~PCI_COMMAND_MEMORY); | 
|  | } | 
|  |  | 
|  | pci_write_config_dword(dev, reg, new); | 
|  | pci_read_config_dword(dev, reg, &check); | 
|  |  | 
|  | if ((new ^ check) & mask) { | 
|  | pci_err(dev, "%s: error updating (%#010x != %#010x)\n", | 
|  | res_name, new, check); | 
|  | } | 
|  |  | 
|  | if (res->flags & IORESOURCE_MEM_64) { | 
|  | new = region.start >> 16 >> 16; | 
|  | pci_write_config_dword(dev, reg + 4, new); | 
|  | pci_read_config_dword(dev, reg + 4, &check); | 
|  | if (check != new) { | 
|  | pci_err(dev, "%s: error updating (high %#010x != %#010x)\n", | 
|  | res_name, new, check); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (disable) | 
|  | pci_write_config_word(dev, PCI_COMMAND, cmd); | 
|  | } | 
|  |  | 
|  | void pci_update_resource(struct pci_dev *dev, int resno) | 
|  | { | 
|  | if (resno <= PCI_ROM_RESOURCE) | 
|  | pci_std_update_resource(dev, resno); | 
|  | #ifdef CONFIG_PCI_IOV | 
|  | else if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END) | 
|  | pci_iov_update_resource(dev, resno); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | int pci_claim_resource(struct pci_dev *dev, int resource) | 
|  | { | 
|  | struct resource *res = &dev->resource[resource]; | 
|  | const char *res_name = pci_resource_name(dev, resource); | 
|  | struct resource *root, *conflict; | 
|  |  | 
|  | if (res->flags & IORESOURCE_UNSET) { | 
|  | pci_info(dev, "%s %pR: can't claim; no address assigned\n", | 
|  | res_name, res); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we have a shadow copy in RAM, the PCI device doesn't respond | 
|  | * to the shadow range, so we don't need to claim it, and upstream | 
|  | * bridges don't need to route the range to the device. | 
|  | */ | 
|  | if (res->flags & IORESOURCE_ROM_SHADOW) | 
|  | return 0; | 
|  |  | 
|  | root = pci_find_parent_resource(dev, res); | 
|  | if (!root) { | 
|  | pci_info(dev, "%s %pR: can't claim; no compatible bridge window\n", | 
|  | res_name, res); | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | conflict = request_resource_conflict(root, res); | 
|  | if (conflict) { | 
|  | pci_info(dev, "%s %pR: can't claim; address conflict with %s %pR\n", | 
|  | res_name, res, conflict->name, conflict); | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_claim_resource); | 
|  |  | 
|  | void pci_disable_bridge_window(struct pci_dev *dev) | 
|  | { | 
|  | /* MMIO Base/Limit */ | 
|  | pci_write_config_dword(dev, PCI_MEMORY_BASE, 0x0000fff0); | 
|  |  | 
|  | /* Prefetchable MMIO Base/Limit */ | 
|  | pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0); | 
|  | pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0); | 
|  | pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Generic function that returns a value indicating that the device's | 
|  | * original BIOS BAR address was not saved and so is not available for | 
|  | * reinstatement. | 
|  | * | 
|  | * Can be over-ridden by architecture specific code that implements | 
|  | * reinstatement functionality rather than leaving it disabled when | 
|  | * normal allocation attempts fail. | 
|  | */ | 
|  | resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev, | 
|  | int resno, resource_size_t size) | 
|  | { | 
|  | struct resource *root, *conflict; | 
|  | resource_size_t fw_addr, start, end; | 
|  | const char *res_name = pci_resource_name(dev, resno); | 
|  |  | 
|  | fw_addr = pcibios_retrieve_fw_addr(dev, resno); | 
|  | if (!fw_addr) | 
|  | return -ENOMEM; | 
|  |  | 
|  | start = res->start; | 
|  | end = res->end; | 
|  | res->start = fw_addr; | 
|  | res->end = res->start + size - 1; | 
|  | res->flags &= ~IORESOURCE_UNSET; | 
|  |  | 
|  | root = pci_find_parent_resource(dev, res); | 
|  | if (!root) { | 
|  | /* | 
|  | * If dev is behind a bridge, accesses will only reach it | 
|  | * if res is inside the relevant bridge window. | 
|  | */ | 
|  | if (pci_upstream_bridge(dev)) | 
|  | return -ENXIO; | 
|  |  | 
|  | /* | 
|  | * On the root bus, assume the host bridge will forward | 
|  | * everything. | 
|  | */ | 
|  | if (res->flags & IORESOURCE_IO) | 
|  | root = &ioport_resource; | 
|  | else | 
|  | root = &iomem_resource; | 
|  | } | 
|  |  | 
|  | pci_info(dev, "%s: trying firmware assignment %pR\n", res_name, res); | 
|  | conflict = request_resource_conflict(root, res); | 
|  | if (conflict) { | 
|  | pci_info(dev, "%s %pR: conflicts with %s %pR\n", res_name, res, | 
|  | conflict->name, conflict); | 
|  | res->start = start; | 
|  | res->end = end; | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | return -EBUSY; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We don't have to worry about legacy ISA devices, so nothing to do here. | 
|  | * This is marked as __weak because multiple architectures define it; it should | 
|  | * eventually go away. | 
|  | */ | 
|  | resource_size_t __weak pcibios_align_resource(void *data, | 
|  | const struct resource *res, | 
|  | resource_size_t size, | 
|  | resource_size_t align) | 
|  | { | 
|  | return res->start; | 
|  | } | 
|  |  | 
|  | static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev, | 
|  | int resno, resource_size_t size, resource_size_t align) | 
|  | { | 
|  | struct resource *res = dev->resource + resno; | 
|  | resource_size_t min; | 
|  | int ret; | 
|  |  | 
|  | min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM; | 
|  |  | 
|  | /* | 
|  | * First, try exact prefetching match.  Even if a 64-bit | 
|  | * prefetchable bridge window is below 4GB, we can't put a 32-bit | 
|  | * prefetchable resource in it because pbus_size_mem() assumes a | 
|  | * 64-bit window will contain no 32-bit resources.  If we assign | 
|  | * things differently than they were sized, not everything will fit. | 
|  | */ | 
|  | ret = pci_bus_alloc_resource(bus, res, size, align, min, | 
|  | IORESOURCE_PREFETCH | IORESOURCE_MEM_64, | 
|  | pcibios_align_resource, dev); | 
|  | if (ret == 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * If the prefetchable window is only 32 bits wide, we can put | 
|  | * 64-bit prefetchable resources in it. | 
|  | */ | 
|  | if ((res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) == | 
|  | (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) { | 
|  | ret = pci_bus_alloc_resource(bus, res, size, align, min, | 
|  | IORESOURCE_PREFETCH, | 
|  | pcibios_align_resource, dev); | 
|  | if (ret == 0) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we didn't find a better match, we can put any memory resource | 
|  | * in a non-prefetchable window.  If this resource is 32 bits and | 
|  | * non-prefetchable, the first call already tried the only possibility | 
|  | * so we don't need to try again. | 
|  | */ | 
|  | if (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) | 
|  | ret = pci_bus_alloc_resource(bus, res, size, align, min, 0, | 
|  | pcibios_align_resource, dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int _pci_assign_resource(struct pci_dev *dev, int resno, | 
|  | resource_size_t size, resource_size_t min_align) | 
|  | { | 
|  | struct pci_bus *bus; | 
|  | int ret; | 
|  |  | 
|  | bus = dev->bus; | 
|  | while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) { | 
|  | if (!bus->parent || !bus->self->transparent) | 
|  | break; | 
|  | bus = bus->parent; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int pci_assign_resource(struct pci_dev *dev, int resno) | 
|  | { | 
|  | struct resource *res = dev->resource + resno; | 
|  | const char *res_name = pci_resource_name(dev, resno); | 
|  | resource_size_t align, size; | 
|  | int ret; | 
|  |  | 
|  | if (res->flags & IORESOURCE_PCI_FIXED) | 
|  | return 0; | 
|  |  | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | align = pci_resource_alignment(dev, res); | 
|  | if (!align) { | 
|  | pci_info(dev, "%s %pR: can't assign; bogus alignment\n", | 
|  | res_name, res); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | size = resource_size(res); | 
|  | ret = _pci_assign_resource(dev, resno, size, align); | 
|  |  | 
|  | /* | 
|  | * If we failed to assign anything, let's try the address | 
|  | * where firmware left it.  That at least has a chance of | 
|  | * working, which is better than just leaving it disabled. | 
|  | */ | 
|  | if (ret < 0) { | 
|  | pci_info(dev, "%s %pR: can't assign; no space\n", res_name, res); | 
|  | ret = pci_revert_fw_address(res, dev, resno, size); | 
|  | } | 
|  |  | 
|  | if (ret < 0) { | 
|  | pci_info(dev, "%s %pR: failed to assign\n", res_name, res); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | res->flags &= ~IORESOURCE_UNSET; | 
|  | res->flags &= ~IORESOURCE_STARTALIGN; | 
|  | pci_info(dev, "%s %pR: assigned\n", res_name, res); | 
|  | if (resno < PCI_BRIDGE_RESOURCES) | 
|  | pci_update_resource(dev, resno); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_assign_resource); | 
|  |  | 
|  | int pci_reassign_resource(struct pci_dev *dev, int resno, | 
|  | resource_size_t addsize, resource_size_t min_align) | 
|  | { | 
|  | struct resource *res = dev->resource + resno; | 
|  | const char *res_name = pci_resource_name(dev, resno); | 
|  | unsigned long flags; | 
|  | resource_size_t new_size; | 
|  | int ret; | 
|  |  | 
|  | if (res->flags & IORESOURCE_PCI_FIXED) | 
|  | return 0; | 
|  |  | 
|  | flags = res->flags; | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | if (!res->parent) { | 
|  | pci_info(dev, "%s %pR: can't reassign; unassigned resource\n", | 
|  | res_name, res); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* already aligned with min_align */ | 
|  | new_size = resource_size(res) + addsize; | 
|  | ret = _pci_assign_resource(dev, resno, new_size, min_align); | 
|  | if (ret) { | 
|  | res->flags = flags; | 
|  | pci_info(dev, "%s %pR: failed to expand by %#llx\n", | 
|  | res_name, res, (unsigned long long) addsize); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | res->flags &= ~IORESOURCE_UNSET; | 
|  | res->flags &= ~IORESOURCE_STARTALIGN; | 
|  | pci_info(dev, "%s %pR: reassigned; expanded by %#llx\n", | 
|  | res_name, res, (unsigned long long) addsize); | 
|  | if (resno < PCI_BRIDGE_RESOURCES) | 
|  | pci_update_resource(dev, resno); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void pci_release_resource(struct pci_dev *dev, int resno) | 
|  | { | 
|  | struct resource *res = dev->resource + resno; | 
|  | const char *res_name = pci_resource_name(dev, resno); | 
|  |  | 
|  | pci_info(dev, "%s %pR: releasing\n", res_name, res); | 
|  |  | 
|  | if (!res->parent) | 
|  | return; | 
|  |  | 
|  | release_resource(res); | 
|  | res->end = resource_size(res) - 1; | 
|  | res->start = 0; | 
|  | res->flags |= IORESOURCE_UNSET; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_release_resource); | 
|  |  | 
|  | int pci_resize_resource(struct pci_dev *dev, int resno, int size) | 
|  | { | 
|  | struct resource *res = dev->resource + resno; | 
|  | struct pci_host_bridge *host; | 
|  | int old, ret; | 
|  | u32 sizes; | 
|  | u16 cmd; | 
|  |  | 
|  | /* Check if we must preserve the firmware's resource assignment */ | 
|  | host = pci_find_host_bridge(dev->bus); | 
|  | if (host->preserve_config) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | /* Make sure the resource isn't assigned before resizing it. */ | 
|  | if (!(res->flags & IORESOURCE_UNSET)) | 
|  | return -EBUSY; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | if (cmd & PCI_COMMAND_MEMORY) | 
|  | return -EBUSY; | 
|  |  | 
|  | sizes = pci_rebar_get_possible_sizes(dev, resno); | 
|  | if (!sizes) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | if (!(sizes & BIT(size))) | 
|  | return -EINVAL; | 
|  |  | 
|  | old = pci_rebar_get_current_size(dev, resno); | 
|  | if (old < 0) | 
|  | return old; | 
|  |  | 
|  | ret = pci_rebar_set_size(dev, resno, size); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | res->end = res->start + pci_rebar_size_to_bytes(size) - 1; | 
|  |  | 
|  | /* Check if the new config works by trying to assign everything. */ | 
|  | if (dev->bus->self) { | 
|  | ret = pci_reassign_bridge_resources(dev->bus->self, res->flags); | 
|  | if (ret) | 
|  | goto error_resize; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | error_resize: | 
|  | pci_rebar_set_size(dev, resno, old); | 
|  | res->end = res->start + pci_rebar_size_to_bytes(old) - 1; | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_resize_resource); | 
|  |  | 
|  | int pci_enable_resources(struct pci_dev *dev, int mask) | 
|  | { | 
|  | u16 cmd, old_cmd; | 
|  | int i; | 
|  | struct resource *r; | 
|  | const char *r_name; | 
|  |  | 
|  | pci_read_config_word(dev, PCI_COMMAND, &cmd); | 
|  | old_cmd = cmd; | 
|  |  | 
|  | pci_dev_for_each_resource(dev, r, i) { | 
|  | if (!(mask & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | r_name = pci_resource_name(dev, i); | 
|  |  | 
|  | if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) | 
|  | continue; | 
|  | if ((i == PCI_ROM_RESOURCE) && | 
|  | (!(r->flags & IORESOURCE_ROM_ENABLE))) | 
|  | continue; | 
|  |  | 
|  | if (r->flags & IORESOURCE_UNSET) { | 
|  | pci_err(dev, "%s %pR: not assigned; can't enable device\n", | 
|  | r_name, r); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!r->parent) { | 
|  | pci_err(dev, "%s %pR: not claimed; can't enable device\n", | 
|  | r_name, r); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (r->flags & IORESOURCE_IO) | 
|  | cmd |= PCI_COMMAND_IO; | 
|  | if (r->flags & IORESOURCE_MEM) | 
|  | cmd |= PCI_COMMAND_MEMORY; | 
|  | } | 
|  |  | 
|  | if (cmd != old_cmd) { | 
|  | pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd); | 
|  | pci_write_config_word(dev, PCI_COMMAND, cmd); | 
|  | } | 
|  | return 0; | 
|  | } |