| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  *  linux/fs/ext4/indirect.c | 
 |  * | 
 |  *  from | 
 |  * | 
 |  *  linux/fs/ext4/inode.c | 
 |  * | 
 |  * Copyright (C) 1992, 1993, 1994, 1995 | 
 |  * Remy Card (card@masi.ibp.fr) | 
 |  * Laboratoire MASI - Institut Blaise Pascal | 
 |  * Universite Pierre et Marie Curie (Paris VI) | 
 |  * | 
 |  *  from | 
 |  * | 
 |  *  linux/fs/minix/inode.c | 
 |  * | 
 |  *  Copyright (C) 1991, 1992  Linus Torvalds | 
 |  * | 
 |  *  Goal-directed block allocation by Stephen Tweedie | 
 |  *	(sct@redhat.com), 1993, 1998 | 
 |  */ | 
 |  | 
 | #include "ext4_jbd2.h" | 
 | #include "truncate.h" | 
 | #include <linux/dax.h> | 
 | #include <linux/uio.h> | 
 |  | 
 | #include <trace/events/ext4.h> | 
 |  | 
 | typedef struct { | 
 | 	__le32	*p; | 
 | 	__le32	key; | 
 | 	struct buffer_head *bh; | 
 | } Indirect; | 
 |  | 
 | static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | 
 | { | 
 | 	p->key = *(p->p = v); | 
 | 	p->bh = bh; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_block_to_path - parse the block number into array of offsets | 
 |  *	@inode: inode in question (we are only interested in its superblock) | 
 |  *	@i_block: block number to be parsed | 
 |  *	@offsets: array to store the offsets in | 
 |  *	@boundary: set this non-zero if the referred-to block is likely to be | 
 |  *	       followed (on disk) by an indirect block. | 
 |  * | 
 |  *	To store the locations of file's data ext4 uses a data structure common | 
 |  *	for UNIX filesystems - tree of pointers anchored in the inode, with | 
 |  *	data blocks at leaves and indirect blocks in intermediate nodes. | 
 |  *	This function translates the block number into path in that tree - | 
 |  *	return value is the path length and @offsets[n] is the offset of | 
 |  *	pointer to (n+1)th node in the nth one. If @block is out of range | 
 |  *	(negative or too large) warning is printed and zero returned. | 
 |  * | 
 |  *	Note: function doesn't find node addresses, so no IO is needed. All | 
 |  *	we need to know is the capacity of indirect blocks (taken from the | 
 |  *	inode->i_sb). | 
 |  */ | 
 |  | 
 | /* | 
 |  * Portability note: the last comparison (check that we fit into triple | 
 |  * indirect block) is spelled differently, because otherwise on an | 
 |  * architecture with 32-bit longs and 8Kb pages we might get into trouble | 
 |  * if our filesystem had 8Kb blocks. We might use long long, but that would | 
 |  * kill us on x86. Oh, well, at least the sign propagation does not matter - | 
 |  * i_block would have to be negative in the very beginning, so we would not | 
 |  * get there at all. | 
 |  */ | 
 |  | 
 | static int ext4_block_to_path(struct inode *inode, | 
 | 			      ext4_lblk_t i_block, | 
 | 			      ext4_lblk_t offsets[4], int *boundary) | 
 | { | 
 | 	int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | 
 | 	const long direct_blocks = EXT4_NDIR_BLOCKS, | 
 | 		indirect_blocks = ptrs, | 
 | 		double_blocks = (1 << (ptrs_bits * 2)); | 
 | 	int n = 0; | 
 | 	int final = 0; | 
 |  | 
 | 	if (i_block < direct_blocks) { | 
 | 		offsets[n++] = i_block; | 
 | 		final = direct_blocks; | 
 | 	} else if ((i_block -= direct_blocks) < indirect_blocks) { | 
 | 		offsets[n++] = EXT4_IND_BLOCK; | 
 | 		offsets[n++] = i_block; | 
 | 		final = ptrs; | 
 | 	} else if ((i_block -= indirect_blocks) < double_blocks) { | 
 | 		offsets[n++] = EXT4_DIND_BLOCK; | 
 | 		offsets[n++] = i_block >> ptrs_bits; | 
 | 		offsets[n++] = i_block & (ptrs - 1); | 
 | 		final = ptrs; | 
 | 	} else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | 
 | 		offsets[n++] = EXT4_TIND_BLOCK; | 
 | 		offsets[n++] = i_block >> (ptrs_bits * 2); | 
 | 		offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | 
 | 		offsets[n++] = i_block & (ptrs - 1); | 
 | 		final = ptrs; | 
 | 	} else { | 
 | 		ext4_warning(inode->i_sb, "block %lu > max in inode %lu", | 
 | 			     i_block + direct_blocks + | 
 | 			     indirect_blocks + double_blocks, inode->i_ino); | 
 | 	} | 
 | 	if (boundary) | 
 | 		*boundary = final - 1 - (i_block & (ptrs - 1)); | 
 | 	return n; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_get_branch - read the chain of indirect blocks leading to data | 
 |  *	@inode: inode in question | 
 |  *	@depth: depth of the chain (1 - direct pointer, etc.) | 
 |  *	@offsets: offsets of pointers in inode/indirect blocks | 
 |  *	@chain: place to store the result | 
 |  *	@err: here we store the error value | 
 |  * | 
 |  *	Function fills the array of triples <key, p, bh> and returns %NULL | 
 |  *	if everything went OK or the pointer to the last filled triple | 
 |  *	(incomplete one) otherwise. Upon the return chain[i].key contains | 
 |  *	the number of (i+1)-th block in the chain (as it is stored in memory, | 
 |  *	i.e. little-endian 32-bit), chain[i].p contains the address of that | 
 |  *	number (it points into struct inode for i==0 and into the bh->b_data | 
 |  *	for i>0) and chain[i].bh points to the buffer_head of i-th indirect | 
 |  *	block for i>0 and NULL for i==0. In other words, it holds the block | 
 |  *	numbers of the chain, addresses they were taken from (and where we can | 
 |  *	verify that chain did not change) and buffer_heads hosting these | 
 |  *	numbers. | 
 |  * | 
 |  *	Function stops when it stumbles upon zero pointer (absent block) | 
 |  *		(pointer to last triple returned, *@err == 0) | 
 |  *	or when it gets an IO error reading an indirect block | 
 |  *		(ditto, *@err == -EIO) | 
 |  *	or when it reads all @depth-1 indirect blocks successfully and finds | 
 |  *	the whole chain, all way to the data (returns %NULL, *err == 0). | 
 |  * | 
 |  *      Need to be called with | 
 |  *      down_read(&EXT4_I(inode)->i_data_sem) | 
 |  */ | 
 | static Indirect *ext4_get_branch(struct inode *inode, int depth, | 
 | 				 ext4_lblk_t  *offsets, | 
 | 				 Indirect chain[4], int *err) | 
 | { | 
 | 	struct super_block *sb = inode->i_sb; | 
 | 	Indirect *p = chain; | 
 | 	struct buffer_head *bh; | 
 | 	unsigned int key; | 
 | 	int ret = -EIO; | 
 |  | 
 | 	*err = 0; | 
 | 	/* i_data is not going away, no lock needed */ | 
 | 	add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); | 
 | 	if (!p->key) | 
 | 		goto no_block; | 
 | 	while (--depth) { | 
 | 		key = le32_to_cpu(p->key); | 
 | 		if (key > ext4_blocks_count(EXT4_SB(sb)->s_es)) { | 
 | 			/* the block was out of range */ | 
 | 			ret = -EFSCORRUPTED; | 
 | 			goto failure; | 
 | 		} | 
 | 		bh = sb_getblk(sb, key); | 
 | 		if (unlikely(!bh)) { | 
 | 			ret = -ENOMEM; | 
 | 			goto failure; | 
 | 		} | 
 |  | 
 | 		if (!bh_uptodate_or_lock(bh)) { | 
 | 			if (ext4_read_bh(bh, 0, NULL) < 0) { | 
 | 				put_bh(bh); | 
 | 				goto failure; | 
 | 			} | 
 | 			/* validate block references */ | 
 | 			if (ext4_check_indirect_blockref(inode, bh)) { | 
 | 				put_bh(bh); | 
 | 				goto failure; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); | 
 | 		/* Reader: end */ | 
 | 		if (!p->key) | 
 | 			goto no_block; | 
 | 	} | 
 | 	return NULL; | 
 |  | 
 | failure: | 
 | 	*err = ret; | 
 | no_block: | 
 | 	return p; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_near - find a place for allocation with sufficient locality | 
 |  *	@inode: owner | 
 |  *	@ind: descriptor of indirect block. | 
 |  * | 
 |  *	This function returns the preferred place for block allocation. | 
 |  *	It is used when heuristic for sequential allocation fails. | 
 |  *	Rules are: | 
 |  *	  + if there is a block to the left of our position - allocate near it. | 
 |  *	  + if pointer will live in indirect block - allocate near that block. | 
 |  *	  + if pointer will live in inode - allocate in the same | 
 |  *	    cylinder group. | 
 |  * | 
 |  * In the latter case we colour the starting block by the callers PID to | 
 |  * prevent it from clashing with concurrent allocations for a different inode | 
 |  * in the same block group.   The PID is used here so that functionally related | 
 |  * files will be close-by on-disk. | 
 |  * | 
 |  *	Caller must make sure that @ind is valid and will stay that way. | 
 |  */ | 
 | static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) | 
 | { | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	__le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; | 
 | 	__le32 *p; | 
 |  | 
 | 	/* Try to find previous block */ | 
 | 	for (p = ind->p - 1; p >= start; p--) { | 
 | 		if (*p) | 
 | 			return le32_to_cpu(*p); | 
 | 	} | 
 |  | 
 | 	/* No such thing, so let's try location of indirect block */ | 
 | 	if (ind->bh) | 
 | 		return ind->bh->b_blocknr; | 
 |  | 
 | 	/* | 
 | 	 * It is going to be referred to from the inode itself? OK, just put it | 
 | 	 * into the same cylinder group then. | 
 | 	 */ | 
 | 	return ext4_inode_to_goal_block(inode); | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_goal - find a preferred place for allocation. | 
 |  *	@inode: owner | 
 |  *	@block:  block we want | 
 |  *	@partial: pointer to the last triple within a chain | 
 |  * | 
 |  *	Normally this function find the preferred place for block allocation, | 
 |  *	returns it. | 
 |  *	Because this is only used for non-extent files, we limit the block nr | 
 |  *	to 32 bits. | 
 |  */ | 
 | static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, | 
 | 				   Indirect *partial) | 
 | { | 
 | 	ext4_fsblk_t goal; | 
 |  | 
 | 	/* | 
 | 	 * XXX need to get goal block from mballoc's data structures | 
 | 	 */ | 
 |  | 
 | 	goal = ext4_find_near(inode, partial); | 
 | 	goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; | 
 | 	return goal; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_blks_to_allocate - Look up the block map and count the number | 
 |  *	of direct blocks need to be allocated for the given branch. | 
 |  * | 
 |  *	@branch: chain of indirect blocks | 
 |  *	@k: number of blocks need for indirect blocks | 
 |  *	@blks: number of data blocks to be mapped. | 
 |  *	@blocks_to_boundary:  the offset in the indirect block | 
 |  * | 
 |  *	return the total number of blocks to be allocate, including the | 
 |  *	direct and indirect blocks. | 
 |  */ | 
 | static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, | 
 | 				 int blocks_to_boundary) | 
 | { | 
 | 	unsigned int count = 0; | 
 |  | 
 | 	/* | 
 | 	 * Simple case, [t,d]Indirect block(s) has not allocated yet | 
 | 	 * then it's clear blocks on that path have not allocated | 
 | 	 */ | 
 | 	if (k > 0) { | 
 | 		/* right now we don't handle cross boundary allocation */ | 
 | 		if (blks < blocks_to_boundary + 1) | 
 | 			count += blks; | 
 | 		else | 
 | 			count += blocks_to_boundary + 1; | 
 | 		return count; | 
 | 	} | 
 |  | 
 | 	count++; | 
 | 	while (count < blks && count <= blocks_to_boundary && | 
 | 		le32_to_cpu(*(branch[0].p + count)) == 0) { | 
 | 		count++; | 
 | 	} | 
 | 	return count; | 
 | } | 
 |  | 
 | /** | 
 |  * ext4_alloc_branch() - allocate and set up a chain of blocks | 
 |  * @handle: handle for this transaction | 
 |  * @ar: structure describing the allocation request | 
 |  * @indirect_blks: number of allocated indirect blocks | 
 |  * @offsets: offsets (in the blocks) to store the pointers to next. | 
 |  * @branch: place to store the chain in. | 
 |  * | 
 |  *	This function allocates blocks, zeroes out all but the last one, | 
 |  *	links them into chain and (if we are synchronous) writes them to disk. | 
 |  *	In other words, it prepares a branch that can be spliced onto the | 
 |  *	inode. It stores the information about that chain in the branch[], in | 
 |  *	the same format as ext4_get_branch() would do. We are calling it after | 
 |  *	we had read the existing part of chain and partial points to the last | 
 |  *	triple of that (one with zero ->key). Upon the exit we have the same | 
 |  *	picture as after the successful ext4_get_block(), except that in one | 
 |  *	place chain is disconnected - *branch->p is still zero (we did not | 
 |  *	set the last link), but branch->key contains the number that should | 
 |  *	be placed into *branch->p to fill that gap. | 
 |  * | 
 |  *	If allocation fails we free all blocks we've allocated (and forget | 
 |  *	their buffer_heads) and return the error value the from failed | 
 |  *	ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain | 
 |  *	as described above and return 0. | 
 |  */ | 
 | static int ext4_alloc_branch(handle_t *handle, | 
 | 			     struct ext4_allocation_request *ar, | 
 | 			     int indirect_blks, ext4_lblk_t *offsets, | 
 | 			     Indirect *branch) | 
 | { | 
 | 	struct buffer_head *		bh; | 
 | 	ext4_fsblk_t			b, new_blocks[4]; | 
 | 	__le32				*p; | 
 | 	int				i, j, err, len = 1; | 
 |  | 
 | 	for (i = 0; i <= indirect_blks; i++) { | 
 | 		if (i == indirect_blks) { | 
 | 			new_blocks[i] = ext4_mb_new_blocks(handle, ar, &err); | 
 | 		} else { | 
 | 			ar->goal = new_blocks[i] = ext4_new_meta_blocks(handle, | 
 | 					ar->inode, ar->goal, | 
 | 					ar->flags & EXT4_MB_DELALLOC_RESERVED, | 
 | 					NULL, &err); | 
 | 			/* Simplify error cleanup... */ | 
 | 			branch[i+1].bh = NULL; | 
 | 		} | 
 | 		if (err) { | 
 | 			i--; | 
 | 			goto failed; | 
 | 		} | 
 | 		branch[i].key = cpu_to_le32(new_blocks[i]); | 
 | 		if (i == 0) | 
 | 			continue; | 
 |  | 
 | 		bh = branch[i].bh = sb_getblk(ar->inode->i_sb, new_blocks[i-1]); | 
 | 		if (unlikely(!bh)) { | 
 | 			err = -ENOMEM; | 
 | 			goto failed; | 
 | 		} | 
 | 		lock_buffer(bh); | 
 | 		BUFFER_TRACE(bh, "call get_create_access"); | 
 | 		err = ext4_journal_get_create_access(handle, ar->inode->i_sb, | 
 | 						     bh, EXT4_JTR_NONE); | 
 | 		if (err) { | 
 | 			unlock_buffer(bh); | 
 | 			goto failed; | 
 | 		} | 
 |  | 
 | 		memset(bh->b_data, 0, bh->b_size); | 
 | 		p = branch[i].p = (__le32 *) bh->b_data + offsets[i]; | 
 | 		b = new_blocks[i]; | 
 |  | 
 | 		if (i == indirect_blks) | 
 | 			len = ar->len; | 
 | 		for (j = 0; j < len; j++) | 
 | 			*p++ = cpu_to_le32(b++); | 
 |  | 
 | 		BUFFER_TRACE(bh, "marking uptodate"); | 
 | 		set_buffer_uptodate(bh); | 
 | 		unlock_buffer(bh); | 
 |  | 
 | 		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 		err = ext4_handle_dirty_metadata(handle, ar->inode, bh); | 
 | 		if (err) | 
 | 			goto failed; | 
 | 	} | 
 | 	return 0; | 
 | failed: | 
 | 	if (i == indirect_blks) { | 
 | 		/* Free data blocks */ | 
 | 		ext4_free_blocks(handle, ar->inode, NULL, new_blocks[i], | 
 | 				 ar->len, 0); | 
 | 		i--; | 
 | 	} | 
 | 	for (; i >= 0; i--) { | 
 | 		/* | 
 | 		 * We want to ext4_forget() only freshly allocated indirect | 
 | 		 * blocks. Buffer for new_blocks[i] is at branch[i+1].bh | 
 | 		 * (buffer at branch[0].bh is indirect block / inode already | 
 | 		 * existing before ext4_alloc_branch() was called). Also | 
 | 		 * because blocks are freshly allocated, we don't need to | 
 | 		 * revoke them which is why we don't set | 
 | 		 * EXT4_FREE_BLOCKS_METADATA. | 
 | 		 */ | 
 | 		ext4_free_blocks(handle, ar->inode, branch[i+1].bh, | 
 | 				 new_blocks[i], 1, | 
 | 				 branch[i+1].bh ? EXT4_FREE_BLOCKS_FORGET : 0); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | /** | 
 |  * ext4_splice_branch() - splice the allocated branch onto inode. | 
 |  * @handle: handle for this transaction | 
 |  * @ar: structure describing the allocation request | 
 |  * @where: location of missing link | 
 |  * @num:   number of indirect blocks we are adding | 
 |  * | 
 |  * This function fills the missing link and does all housekeeping needed in | 
 |  * inode (->i_blocks, etc.). In case of success we end up with the full | 
 |  * chain to new block and return 0. | 
 |  */ | 
 | static int ext4_splice_branch(handle_t *handle, | 
 | 			      struct ext4_allocation_request *ar, | 
 | 			      Indirect *where, int num) | 
 | { | 
 | 	int i; | 
 | 	int err = 0; | 
 | 	ext4_fsblk_t current_block; | 
 |  | 
 | 	/* | 
 | 	 * If we're splicing into a [td]indirect block (as opposed to the | 
 | 	 * inode) then we need to get write access to the [td]indirect block | 
 | 	 * before the splice. | 
 | 	 */ | 
 | 	if (where->bh) { | 
 | 		BUFFER_TRACE(where->bh, "get_write_access"); | 
 | 		err = ext4_journal_get_write_access(handle, ar->inode->i_sb, | 
 | 						    where->bh, EXT4_JTR_NONE); | 
 | 		if (err) | 
 | 			goto err_out; | 
 | 	} | 
 | 	/* That's it */ | 
 |  | 
 | 	*where->p = where->key; | 
 |  | 
 | 	/* | 
 | 	 * Update the host buffer_head or inode to point to more just allocated | 
 | 	 * direct blocks blocks | 
 | 	 */ | 
 | 	if (num == 0 && ar->len > 1) { | 
 | 		current_block = le32_to_cpu(where->key) + 1; | 
 | 		for (i = 1; i < ar->len; i++) | 
 | 			*(where->p + i) = cpu_to_le32(current_block++); | 
 | 	} | 
 |  | 
 | 	/* We are done with atomic stuff, now do the rest of housekeeping */ | 
 | 	/* had we spliced it onto indirect block? */ | 
 | 	if (where->bh) { | 
 | 		/* | 
 | 		 * If we spliced it onto an indirect block, we haven't | 
 | 		 * altered the inode.  Note however that if it is being spliced | 
 | 		 * onto an indirect block at the very end of the file (the | 
 | 		 * file is growing) then we *will* alter the inode to reflect | 
 | 		 * the new i_size.  But that is not done here - it is done in | 
 | 		 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. | 
 | 		 */ | 
 | 		ext4_debug("splicing indirect only\n"); | 
 | 		BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); | 
 | 		err = ext4_handle_dirty_metadata(handle, ar->inode, where->bh); | 
 | 		if (err) | 
 | 			goto err_out; | 
 | 	} else { | 
 | 		/* | 
 | 		 * OK, we spliced it into the inode itself on a direct block. | 
 | 		 */ | 
 | 		err = ext4_mark_inode_dirty(handle, ar->inode); | 
 | 		if (unlikely(err)) | 
 | 			goto err_out; | 
 | 		ext4_debug("splicing direct\n"); | 
 | 	} | 
 | 	return err; | 
 |  | 
 | err_out: | 
 | 	for (i = 1; i <= num; i++) { | 
 | 		/* | 
 | 		 * branch[i].bh is newly allocated, so there is no | 
 | 		 * need to revoke the block, which is why we don't | 
 | 		 * need to set EXT4_FREE_BLOCKS_METADATA. | 
 | 		 */ | 
 | 		ext4_free_blocks(handle, ar->inode, where[i].bh, 0, 1, | 
 | 				 EXT4_FREE_BLOCKS_FORGET); | 
 | 	} | 
 | 	ext4_free_blocks(handle, ar->inode, NULL, le32_to_cpu(where[num].key), | 
 | 			 ar->len, 0); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * The ext4_ind_map_blocks() function handles non-extents inodes | 
 |  * (i.e., using the traditional indirect/double-indirect i_blocks | 
 |  * scheme) for ext4_map_blocks(). | 
 |  * | 
 |  * Allocation strategy is simple: if we have to allocate something, we will | 
 |  * have to go the whole way to leaf. So let's do it before attaching anything | 
 |  * to tree, set linkage between the newborn blocks, write them if sync is | 
 |  * required, recheck the path, free and repeat if check fails, otherwise | 
 |  * set the last missing link (that will protect us from any truncate-generated | 
 |  * removals - all blocks on the path are immune now) and possibly force the | 
 |  * write on the parent block. | 
 |  * That has a nice additional property: no special recovery from the failed | 
 |  * allocations is needed - we simply release blocks and do not touch anything | 
 |  * reachable from inode. | 
 |  * | 
 |  * `handle' can be NULL if create == 0. | 
 |  * | 
 |  * return > 0, # of blocks mapped or allocated. | 
 |  * return = 0, if plain lookup failed. | 
 |  * return < 0, error case. | 
 |  * | 
 |  * The ext4_ind_get_blocks() function should be called with | 
 |  * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem | 
 |  * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or | 
 |  * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system | 
 |  * blocks. | 
 |  */ | 
 | int ext4_ind_map_blocks(handle_t *handle, struct inode *inode, | 
 | 			struct ext4_map_blocks *map, | 
 | 			int flags) | 
 | { | 
 | 	struct ext4_allocation_request ar; | 
 | 	int err = -EIO; | 
 | 	ext4_lblk_t offsets[4]; | 
 | 	Indirect chain[4]; | 
 | 	Indirect *partial; | 
 | 	int indirect_blks; | 
 | 	int blocks_to_boundary = 0; | 
 | 	int depth; | 
 | 	int count = 0; | 
 | 	ext4_fsblk_t first_block = 0; | 
 |  | 
 | 	trace_ext4_ind_map_blocks_enter(inode, map->m_lblk, map->m_len, flags); | 
 | 	ASSERT(!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))); | 
 | 	ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); | 
 | 	depth = ext4_block_to_path(inode, map->m_lblk, offsets, | 
 | 				   &blocks_to_boundary); | 
 |  | 
 | 	if (depth == 0) | 
 | 		goto out; | 
 |  | 
 | 	partial = ext4_get_branch(inode, depth, offsets, chain, &err); | 
 |  | 
 | 	/* Simplest case - block found, no allocation needed */ | 
 | 	if (!partial) { | 
 | 		first_block = le32_to_cpu(chain[depth - 1].key); | 
 | 		count++; | 
 | 		/*map more blocks*/ | 
 | 		while (count < map->m_len && count <= blocks_to_boundary) { | 
 | 			ext4_fsblk_t blk; | 
 |  | 
 | 			blk = le32_to_cpu(*(chain[depth-1].p + count)); | 
 |  | 
 | 			if (blk == first_block + count) | 
 | 				count++; | 
 | 			else | 
 | 				break; | 
 | 		} | 
 | 		goto got_it; | 
 | 	} | 
 |  | 
 | 	/* Next simple case - plain lookup failed */ | 
 | 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) { | 
 | 		unsigned epb = inode->i_sb->s_blocksize / sizeof(u32); | 
 | 		int i; | 
 |  | 
 | 		/* | 
 | 		 * Count number blocks in a subtree under 'partial'. At each | 
 | 		 * level we count number of complete empty subtrees beyond | 
 | 		 * current offset and then descend into the subtree only | 
 | 		 * partially beyond current offset. | 
 | 		 */ | 
 | 		count = 0; | 
 | 		for (i = partial - chain + 1; i < depth; i++) | 
 | 			count = count * epb + (epb - offsets[i] - 1); | 
 | 		count++; | 
 | 		/* Fill in size of a hole we found */ | 
 | 		map->m_pblk = 0; | 
 | 		map->m_len = min_t(unsigned int, map->m_len, count); | 
 | 		goto cleanup; | 
 | 	} | 
 |  | 
 | 	/* Failed read of indirect block */ | 
 | 	if (err == -EIO) | 
 | 		goto cleanup; | 
 |  | 
 | 	/* | 
 | 	 * Okay, we need to do block allocation. | 
 | 	*/ | 
 | 	if (ext4_has_feature_bigalloc(inode->i_sb)) { | 
 | 		EXT4_ERROR_INODE(inode, "Can't allocate blocks for " | 
 | 				 "non-extent mapped inodes with bigalloc"); | 
 | 		err = -EFSCORRUPTED; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Set up for the direct block allocation */ | 
 | 	memset(&ar, 0, sizeof(ar)); | 
 | 	ar.inode = inode; | 
 | 	ar.logical = map->m_lblk; | 
 | 	if (S_ISREG(inode->i_mode)) | 
 | 		ar.flags = EXT4_MB_HINT_DATA; | 
 | 	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
 | 		ar.flags |= EXT4_MB_DELALLOC_RESERVED; | 
 | 	if (flags & EXT4_GET_BLOCKS_METADATA_NOFAIL) | 
 | 		ar.flags |= EXT4_MB_USE_RESERVED; | 
 |  | 
 | 	ar.goal = ext4_find_goal(inode, map->m_lblk, partial); | 
 |  | 
 | 	/* the number of blocks need to allocate for [d,t]indirect blocks */ | 
 | 	indirect_blks = (chain + depth) - partial - 1; | 
 |  | 
 | 	/* | 
 | 	 * Next look up the indirect map to count the totoal number of | 
 | 	 * direct blocks to allocate for this branch. | 
 | 	 */ | 
 | 	ar.len = ext4_blks_to_allocate(partial, indirect_blks, | 
 | 				       map->m_len, blocks_to_boundary); | 
 |  | 
 | 	/* | 
 | 	 * Block out ext4_truncate while we alter the tree | 
 | 	 */ | 
 | 	err = ext4_alloc_branch(handle, &ar, indirect_blks, | 
 | 				offsets + (partial - chain), partial); | 
 |  | 
 | 	/* | 
 | 	 * The ext4_splice_branch call will free and forget any buffers | 
 | 	 * on the new chain if there is a failure, but that risks using | 
 | 	 * up transaction credits, especially for bitmaps where the | 
 | 	 * credits cannot be returned.  Can we handle this somehow?  We | 
 | 	 * may need to return -EAGAIN upwards in the worst case.  --sct | 
 | 	 */ | 
 | 	if (!err) | 
 | 		err = ext4_splice_branch(handle, &ar, partial, indirect_blks); | 
 | 	if (err) | 
 | 		goto cleanup; | 
 |  | 
 | 	map->m_flags |= EXT4_MAP_NEW; | 
 |  | 
 | 	ext4_update_inode_fsync_trans(handle, inode, 1); | 
 | 	count = ar.len; | 
 |  | 
 | 	/* | 
 | 	 * Update reserved blocks/metadata blocks after successful block | 
 | 	 * allocation which had been deferred till now. | 
 | 	 */ | 
 | 	if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
 | 		ext4_da_update_reserve_space(inode, count, 1); | 
 |  | 
 | got_it: | 
 | 	map->m_flags |= EXT4_MAP_MAPPED; | 
 | 	map->m_pblk = le32_to_cpu(chain[depth-1].key); | 
 | 	map->m_len = count; | 
 | 	if (count > blocks_to_boundary) | 
 | 		map->m_flags |= EXT4_MAP_BOUNDARY; | 
 | 	err = count; | 
 | 	/* Clean up and exit */ | 
 | 	partial = chain + depth - 1;	/* the whole chain */ | 
 | cleanup: | 
 | 	while (partial > chain) { | 
 | 		BUFFER_TRACE(partial->bh, "call brelse"); | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | out: | 
 | 	trace_ext4_ind_map_blocks_exit(inode, flags, map, err); | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * Calculate number of indirect blocks touched by mapping @nrblocks logically | 
 |  * contiguous blocks | 
 |  */ | 
 | int ext4_ind_trans_blocks(struct inode *inode, int nrblocks) | 
 | { | 
 | 	/* | 
 | 	 * With N contiguous data blocks, we need at most | 
 | 	 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks, | 
 | 	 * 2 dindirect blocks, and 1 tindirect block | 
 | 	 */ | 
 | 	return DIV_ROUND_UP(nrblocks, EXT4_ADDR_PER_BLOCK(inode->i_sb)) + 4; | 
 | } | 
 |  | 
 | static int ext4_ind_trunc_restart_fn(handle_t *handle, struct inode *inode, | 
 | 				     struct buffer_head *bh, int *dropped) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (bh) { | 
 | 		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
 | 		err = ext4_handle_dirty_metadata(handle, inode, bh); | 
 | 		if (unlikely(err)) | 
 | 			return err; | 
 | 	} | 
 | 	err = ext4_mark_inode_dirty(handle, inode); | 
 | 	if (unlikely(err)) | 
 | 		return err; | 
 | 	/* | 
 | 	 * Drop i_data_sem to avoid deadlock with ext4_map_blocks.  At this | 
 | 	 * moment, get_block can be called only for blocks inside i_size since | 
 | 	 * page cache has been already dropped and writes are blocked by | 
 | 	 * i_rwsem. So we can safely drop the i_data_sem here. | 
 | 	 */ | 
 | 	BUG_ON(EXT4_JOURNAL(inode) == NULL); | 
 | 	ext4_discard_preallocations(inode, 0); | 
 | 	up_write(&EXT4_I(inode)->i_data_sem); | 
 | 	*dropped = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Truncate transactions can be complex and absolutely huge.  So we need to | 
 |  * be able to restart the transaction at a convenient checkpoint to make | 
 |  * sure we don't overflow the journal. | 
 |  * | 
 |  * Try to extend this transaction for the purposes of truncation.  If | 
 |  * extend fails, we restart transaction. | 
 |  */ | 
 | static int ext4_ind_truncate_ensure_credits(handle_t *handle, | 
 | 					    struct inode *inode, | 
 | 					    struct buffer_head *bh, | 
 | 					    int revoke_creds) | 
 | { | 
 | 	int ret; | 
 | 	int dropped = 0; | 
 |  | 
 | 	ret = ext4_journal_ensure_credits_fn(handle, EXT4_RESERVE_TRANS_BLOCKS, | 
 | 			ext4_blocks_for_truncate(inode), revoke_creds, | 
 | 			ext4_ind_trunc_restart_fn(handle, inode, bh, &dropped)); | 
 | 	if (dropped) | 
 | 		down_write(&EXT4_I(inode)->i_data_sem); | 
 | 	if (ret <= 0) | 
 | 		return ret; | 
 | 	if (bh) { | 
 | 		BUFFER_TRACE(bh, "retaking write access"); | 
 | 		ret = ext4_journal_get_write_access(handle, inode->i_sb, bh, | 
 | 						    EXT4_JTR_NONE); | 
 | 		if (unlikely(ret)) | 
 | 			return ret; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Probably it should be a library function... search for first non-zero word | 
 |  * or memcmp with zero_page, whatever is better for particular architecture. | 
 |  * Linus? | 
 |  */ | 
 | static inline int all_zeroes(__le32 *p, __le32 *q) | 
 | { | 
 | 	while (p < q) | 
 | 		if (*p++) | 
 | 			return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_find_shared - find the indirect blocks for partial truncation. | 
 |  *	@inode:	  inode in question | 
 |  *	@depth:	  depth of the affected branch | 
 |  *	@offsets: offsets of pointers in that branch (see ext4_block_to_path) | 
 |  *	@chain:	  place to store the pointers to partial indirect blocks | 
 |  *	@top:	  place to the (detached) top of branch | 
 |  * | 
 |  *	This is a helper function used by ext4_truncate(). | 
 |  * | 
 |  *	When we do truncate() we may have to clean the ends of several | 
 |  *	indirect blocks but leave the blocks themselves alive. Block is | 
 |  *	partially truncated if some data below the new i_size is referred | 
 |  *	from it (and it is on the path to the first completely truncated | 
 |  *	data block, indeed).  We have to free the top of that path along | 
 |  *	with everything to the right of the path. Since no allocation | 
 |  *	past the truncation point is possible until ext4_truncate() | 
 |  *	finishes, we may safely do the latter, but top of branch may | 
 |  *	require special attention - pageout below the truncation point | 
 |  *	might try to populate it. | 
 |  * | 
 |  *	We atomically detach the top of branch from the tree, store the | 
 |  *	block number of its root in *@top, pointers to buffer_heads of | 
 |  *	partially truncated blocks - in @chain[].bh and pointers to | 
 |  *	their last elements that should not be removed - in | 
 |  *	@chain[].p. Return value is the pointer to last filled element | 
 |  *	of @chain. | 
 |  * | 
 |  *	The work left to caller to do the actual freeing of subtrees: | 
 |  *		a) free the subtree starting from *@top | 
 |  *		b) free the subtrees whose roots are stored in | 
 |  *			(@chain[i].p+1 .. end of @chain[i].bh->b_data) | 
 |  *		c) free the subtrees growing from the inode past the @chain[0]. | 
 |  *			(no partially truncated stuff there).  */ | 
 |  | 
 | static Indirect *ext4_find_shared(struct inode *inode, int depth, | 
 | 				  ext4_lblk_t offsets[4], Indirect chain[4], | 
 | 				  __le32 *top) | 
 | { | 
 | 	Indirect *partial, *p; | 
 | 	int k, err; | 
 |  | 
 | 	*top = 0; | 
 | 	/* Make k index the deepest non-null offset + 1 */ | 
 | 	for (k = depth; k > 1 && !offsets[k-1]; k--) | 
 | 		; | 
 | 	partial = ext4_get_branch(inode, k, offsets, chain, &err); | 
 | 	/* Writer: pointers */ | 
 | 	if (!partial) | 
 | 		partial = chain + k-1; | 
 | 	/* | 
 | 	 * If the branch acquired continuation since we've looked at it - | 
 | 	 * fine, it should all survive and (new) top doesn't belong to us. | 
 | 	 */ | 
 | 	if (!partial->key && *partial->p) | 
 | 		/* Writer: end */ | 
 | 		goto no_top; | 
 | 	for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) | 
 | 		; | 
 | 	/* | 
 | 	 * OK, we've found the last block that must survive. The rest of our | 
 | 	 * branch should be detached before unlocking. However, if that rest | 
 | 	 * of branch is all ours and does not grow immediately from the inode | 
 | 	 * it's easier to cheat and just decrement partial->p. | 
 | 	 */ | 
 | 	if (p == chain + k - 1 && p > chain) { | 
 | 		p->p--; | 
 | 	} else { | 
 | 		*top = *p->p; | 
 | 		/* Nope, don't do this in ext4.  Must leave the tree intact */ | 
 | #if 0 | 
 | 		*p->p = 0; | 
 | #endif | 
 | 	} | 
 | 	/* Writer: end */ | 
 |  | 
 | 	while (partial > p) { | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | no_top: | 
 | 	return partial; | 
 | } | 
 |  | 
 | /* | 
 |  * Zero a number of block pointers in either an inode or an indirect block. | 
 |  * If we restart the transaction we must again get write access to the | 
 |  * indirect block for further modification. | 
 |  * | 
 |  * We release `count' blocks on disk, but (last - first) may be greater | 
 |  * than `count' because there can be holes in there. | 
 |  * | 
 |  * Return 0 on success, 1 on invalid block range | 
 |  * and < 0 on fatal error. | 
 |  */ | 
 | static int ext4_clear_blocks(handle_t *handle, struct inode *inode, | 
 | 			     struct buffer_head *bh, | 
 | 			     ext4_fsblk_t block_to_free, | 
 | 			     unsigned long count, __le32 *first, | 
 | 			     __le32 *last) | 
 | { | 
 | 	__le32 *p; | 
 | 	int	flags = EXT4_FREE_BLOCKS_VALIDATED; | 
 | 	int	err; | 
 |  | 
 | 	if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode) || | 
 | 	    ext4_test_inode_flag(inode, EXT4_INODE_EA_INODE)) | 
 | 		flags |= EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_METADATA; | 
 | 	else if (ext4_should_journal_data(inode)) | 
 | 		flags |= EXT4_FREE_BLOCKS_FORGET; | 
 |  | 
 | 	if (!ext4_inode_block_valid(inode, block_to_free, count)) { | 
 | 		EXT4_ERROR_INODE(inode, "attempt to clear invalid " | 
 | 				 "blocks %llu len %lu", | 
 | 				 (unsigned long long) block_to_free, count); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	err = ext4_ind_truncate_ensure_credits(handle, inode, bh, | 
 | 				ext4_free_data_revoke_credits(inode, count)); | 
 | 	if (err < 0) | 
 | 		goto out_err; | 
 |  | 
 | 	for (p = first; p < last; p++) | 
 | 		*p = 0; | 
 |  | 
 | 	ext4_free_blocks(handle, inode, NULL, block_to_free, count, flags); | 
 | 	return 0; | 
 | out_err: | 
 | 	ext4_std_error(inode->i_sb, err); | 
 | 	return err; | 
 | } | 
 |  | 
 | /** | 
 |  * ext4_free_data - free a list of data blocks | 
 |  * @handle:	handle for this transaction | 
 |  * @inode:	inode we are dealing with | 
 |  * @this_bh:	indirect buffer_head which contains *@first and *@last | 
 |  * @first:	array of block numbers | 
 |  * @last:	points immediately past the end of array | 
 |  * | 
 |  * We are freeing all blocks referred from that array (numbers are stored as | 
 |  * little-endian 32-bit) and updating @inode->i_blocks appropriately. | 
 |  * | 
 |  * We accumulate contiguous runs of blocks to free.  Conveniently, if these | 
 |  * blocks are contiguous then releasing them at one time will only affect one | 
 |  * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | 
 |  * actually use a lot of journal space. | 
 |  * | 
 |  * @this_bh will be %NULL if @first and @last point into the inode's direct | 
 |  * block pointers. | 
 |  */ | 
 | static void ext4_free_data(handle_t *handle, struct inode *inode, | 
 | 			   struct buffer_head *this_bh, | 
 | 			   __le32 *first, __le32 *last) | 
 | { | 
 | 	ext4_fsblk_t block_to_free = 0;    /* Starting block # of a run */ | 
 | 	unsigned long count = 0;	    /* Number of blocks in the run */ | 
 | 	__le32 *block_to_free_p = NULL;	    /* Pointer into inode/ind | 
 | 					       corresponding to | 
 | 					       block_to_free */ | 
 | 	ext4_fsblk_t nr;		    /* Current block # */ | 
 | 	__le32 *p;			    /* Pointer into inode/ind | 
 | 					       for current block */ | 
 | 	int err = 0; | 
 |  | 
 | 	if (this_bh) {				/* For indirect block */ | 
 | 		BUFFER_TRACE(this_bh, "get_write_access"); | 
 | 		err = ext4_journal_get_write_access(handle, inode->i_sb, | 
 | 						    this_bh, EXT4_JTR_NONE); | 
 | 		/* Important: if we can't update the indirect pointers | 
 | 		 * to the blocks, we can't free them. */ | 
 | 		if (err) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	for (p = first; p < last; p++) { | 
 | 		nr = le32_to_cpu(*p); | 
 | 		if (nr) { | 
 | 			/* accumulate blocks to free if they're contiguous */ | 
 | 			if (count == 0) { | 
 | 				block_to_free = nr; | 
 | 				block_to_free_p = p; | 
 | 				count = 1; | 
 | 			} else if (nr == block_to_free + count) { | 
 | 				count++; | 
 | 			} else { | 
 | 				err = ext4_clear_blocks(handle, inode, this_bh, | 
 | 						        block_to_free, count, | 
 | 						        block_to_free_p, p); | 
 | 				if (err) | 
 | 					break; | 
 | 				block_to_free = nr; | 
 | 				block_to_free_p = p; | 
 | 				count = 1; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!err && count > 0) | 
 | 		err = ext4_clear_blocks(handle, inode, this_bh, block_to_free, | 
 | 					count, block_to_free_p, p); | 
 | 	if (err < 0) | 
 | 		/* fatal error */ | 
 | 		return; | 
 |  | 
 | 	if (this_bh) { | 
 | 		BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); | 
 |  | 
 | 		/* | 
 | 		 * The buffer head should have an attached journal head at this | 
 | 		 * point. However, if the data is corrupted and an indirect | 
 | 		 * block pointed to itself, it would have been detached when | 
 | 		 * the block was cleared. Check for this instead of OOPSing. | 
 | 		 */ | 
 | 		if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) | 
 | 			ext4_handle_dirty_metadata(handle, inode, this_bh); | 
 | 		else | 
 | 			EXT4_ERROR_INODE(inode, | 
 | 					 "circular indirect block detected at " | 
 | 					 "block %llu", | 
 | 				(unsigned long long) this_bh->b_blocknr); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_free_branches - free an array of branches | 
 |  *	@handle: JBD handle for this transaction | 
 |  *	@inode:	inode we are dealing with | 
 |  *	@parent_bh: the buffer_head which contains *@first and *@last | 
 |  *	@first:	array of block numbers | 
 |  *	@last:	pointer immediately past the end of array | 
 |  *	@depth:	depth of the branches to free | 
 |  * | 
 |  *	We are freeing all blocks referred from these branches (numbers are | 
 |  *	stored as little-endian 32-bit) and updating @inode->i_blocks | 
 |  *	appropriately. | 
 |  */ | 
 | static void ext4_free_branches(handle_t *handle, struct inode *inode, | 
 | 			       struct buffer_head *parent_bh, | 
 | 			       __le32 *first, __le32 *last, int depth) | 
 | { | 
 | 	ext4_fsblk_t nr; | 
 | 	__le32 *p; | 
 |  | 
 | 	if (ext4_handle_is_aborted(handle)) | 
 | 		return; | 
 |  | 
 | 	if (depth--) { | 
 | 		struct buffer_head *bh; | 
 | 		int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 		p = last; | 
 | 		while (--p >= first) { | 
 | 			nr = le32_to_cpu(*p); | 
 | 			if (!nr) | 
 | 				continue;		/* A hole */ | 
 |  | 
 | 			if (!ext4_inode_block_valid(inode, nr, 1)) { | 
 | 				EXT4_ERROR_INODE(inode, | 
 | 						 "invalid indirect mapped " | 
 | 						 "block %lu (level %d)", | 
 | 						 (unsigned long) nr, depth); | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			/* Go read the buffer for the next level down */ | 
 | 			bh = ext4_sb_bread(inode->i_sb, nr, 0); | 
 |  | 
 | 			/* | 
 | 			 * A read failure? Report error and clear slot | 
 | 			 * (should be rare). | 
 | 			 */ | 
 | 			if (IS_ERR(bh)) { | 
 | 				ext4_error_inode_block(inode, nr, -PTR_ERR(bh), | 
 | 						       "Read failure"); | 
 | 				continue; | 
 | 			} | 
 |  | 
 | 			/* This zaps the entire block.  Bottom up. */ | 
 | 			BUFFER_TRACE(bh, "free child branches"); | 
 | 			ext4_free_branches(handle, inode, bh, | 
 | 					(__le32 *) bh->b_data, | 
 | 					(__le32 *) bh->b_data + addr_per_block, | 
 | 					depth); | 
 | 			brelse(bh); | 
 |  | 
 | 			/* | 
 | 			 * Everything below this pointer has been | 
 | 			 * released.  Now let this top-of-subtree go. | 
 | 			 * | 
 | 			 * We want the freeing of this indirect block to be | 
 | 			 * atomic in the journal with the updating of the | 
 | 			 * bitmap block which owns it.  So make some room in | 
 | 			 * the journal. | 
 | 			 * | 
 | 			 * We zero the parent pointer *after* freeing its | 
 | 			 * pointee in the bitmaps, so if extend_transaction() | 
 | 			 * for some reason fails to put the bitmap changes and | 
 | 			 * the release into the same transaction, recovery | 
 | 			 * will merely complain about releasing a free block, | 
 | 			 * rather than leaking blocks. | 
 | 			 */ | 
 | 			if (ext4_handle_is_aborted(handle)) | 
 | 				return; | 
 | 			if (ext4_ind_truncate_ensure_credits(handle, inode, | 
 | 					NULL, | 
 | 					ext4_free_metadata_revoke_credits( | 
 | 							inode->i_sb, 1)) < 0) | 
 | 				return; | 
 |  | 
 | 			/* | 
 | 			 * The forget flag here is critical because if | 
 | 			 * we are journaling (and not doing data | 
 | 			 * journaling), we have to make sure a revoke | 
 | 			 * record is written to prevent the journal | 
 | 			 * replay from overwriting the (former) | 
 | 			 * indirect block if it gets reallocated as a | 
 | 			 * data block.  This must happen in the same | 
 | 			 * transaction where the data blocks are | 
 | 			 * actually freed. | 
 | 			 */ | 
 | 			ext4_free_blocks(handle, inode, NULL, nr, 1, | 
 | 					 EXT4_FREE_BLOCKS_METADATA| | 
 | 					 EXT4_FREE_BLOCKS_FORGET); | 
 |  | 
 | 			if (parent_bh) { | 
 | 				/* | 
 | 				 * The block which we have just freed is | 
 | 				 * pointed to by an indirect block: journal it | 
 | 				 */ | 
 | 				BUFFER_TRACE(parent_bh, "get_write_access"); | 
 | 				if (!ext4_journal_get_write_access(handle, | 
 | 						inode->i_sb, parent_bh, | 
 | 						EXT4_JTR_NONE)) { | 
 | 					*p = 0; | 
 | 					BUFFER_TRACE(parent_bh, | 
 | 					"call ext4_handle_dirty_metadata"); | 
 | 					ext4_handle_dirty_metadata(handle, | 
 | 								   inode, | 
 | 								   parent_bh); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		/* We have reached the bottom of the tree. */ | 
 | 		BUFFER_TRACE(parent_bh, "free data blocks"); | 
 | 		ext4_free_data(handle, inode, parent_bh, first, last); | 
 | 	} | 
 | } | 
 |  | 
 | void ext4_ind_truncate(handle_t *handle, struct inode *inode) | 
 | { | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	__le32 *i_data = ei->i_data; | 
 | 	int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	ext4_lblk_t offsets[4]; | 
 | 	Indirect chain[4]; | 
 | 	Indirect *partial; | 
 | 	__le32 nr = 0; | 
 | 	int n = 0; | 
 | 	ext4_lblk_t last_block, max_block; | 
 | 	unsigned blocksize = inode->i_sb->s_blocksize; | 
 |  | 
 | 	last_block = (inode->i_size + blocksize-1) | 
 | 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
 | 	max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) | 
 | 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
 |  | 
 | 	if (last_block != max_block) { | 
 | 		n = ext4_block_to_path(inode, last_block, offsets, NULL); | 
 | 		if (n == 0) | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	ext4_es_remove_extent(inode, last_block, EXT_MAX_BLOCKS - last_block); | 
 |  | 
 | 	/* | 
 | 	 * The orphan list entry will now protect us from any crash which | 
 | 	 * occurs before the truncate completes, so it is now safe to propagate | 
 | 	 * the new, shorter inode size (held for now in i_size) into the | 
 | 	 * on-disk inode. We do this via i_disksize, which is the value which | 
 | 	 * ext4 *really* writes onto the disk inode. | 
 | 	 */ | 
 | 	ei->i_disksize = inode->i_size; | 
 |  | 
 | 	if (last_block == max_block) { | 
 | 		/* | 
 | 		 * It is unnecessary to free any data blocks if last_block is | 
 | 		 * equal to the indirect block limit. | 
 | 		 */ | 
 | 		return; | 
 | 	} else if (n == 1) {		/* direct blocks */ | 
 | 		ext4_free_data(handle, inode, NULL, i_data+offsets[0], | 
 | 			       i_data + EXT4_NDIR_BLOCKS); | 
 | 		goto do_indirects; | 
 | 	} | 
 |  | 
 | 	partial = ext4_find_shared(inode, n, offsets, chain, &nr); | 
 | 	/* Kill the top of shared branch (not detached) */ | 
 | 	if (nr) { | 
 | 		if (partial == chain) { | 
 | 			/* Shared branch grows from the inode */ | 
 | 			ext4_free_branches(handle, inode, NULL, | 
 | 					   &nr, &nr+1, (chain+n-1) - partial); | 
 | 			*partial->p = 0; | 
 | 			/* | 
 | 			 * We mark the inode dirty prior to restart, | 
 | 			 * and prior to stop.  No need for it here. | 
 | 			 */ | 
 | 		} else { | 
 | 			/* Shared branch grows from an indirect block */ | 
 | 			BUFFER_TRACE(partial->bh, "get_write_access"); | 
 | 			ext4_free_branches(handle, inode, partial->bh, | 
 | 					partial->p, | 
 | 					partial->p+1, (chain+n-1) - partial); | 
 | 		} | 
 | 	} | 
 | 	/* Clear the ends of indirect blocks on the shared branch */ | 
 | 	while (partial > chain) { | 
 | 		ext4_free_branches(handle, inode, partial->bh, partial->p + 1, | 
 | 				   (__le32*)partial->bh->b_data+addr_per_block, | 
 | 				   (chain+n-1) - partial); | 
 | 		BUFFER_TRACE(partial->bh, "call brelse"); | 
 | 		brelse(partial->bh); | 
 | 		partial--; | 
 | 	} | 
 | do_indirects: | 
 | 	/* Kill the remaining (whole) subtrees */ | 
 | 	switch (offsets[0]) { | 
 | 	default: | 
 | 		nr = i_data[EXT4_IND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | 
 | 			i_data[EXT4_IND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_IND_BLOCK: | 
 | 		nr = i_data[EXT4_DIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | 
 | 			i_data[EXT4_DIND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_DIND_BLOCK: | 
 | 		nr = i_data[EXT4_TIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | 
 | 			i_data[EXT4_TIND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_TIND_BLOCK: | 
 | 		; | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  *	ext4_ind_remove_space - remove space from the range | 
 |  *	@handle: JBD handle for this transaction | 
 |  *	@inode:	inode we are dealing with | 
 |  *	@start:	First block to remove | 
 |  *	@end:	One block after the last block to remove (exclusive) | 
 |  * | 
 |  *	Free the blocks in the defined range (end is exclusive endpoint of | 
 |  *	range). This is used by ext4_punch_hole(). | 
 |  */ | 
 | int ext4_ind_remove_space(handle_t *handle, struct inode *inode, | 
 | 			  ext4_lblk_t start, ext4_lblk_t end) | 
 | { | 
 | 	struct ext4_inode_info *ei = EXT4_I(inode); | 
 | 	__le32 *i_data = ei->i_data; | 
 | 	int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
 | 	ext4_lblk_t offsets[4], offsets2[4]; | 
 | 	Indirect chain[4], chain2[4]; | 
 | 	Indirect *partial, *partial2; | 
 | 	Indirect *p = NULL, *p2 = NULL; | 
 | 	ext4_lblk_t max_block; | 
 | 	__le32 nr = 0, nr2 = 0; | 
 | 	int n = 0, n2 = 0; | 
 | 	unsigned blocksize = inode->i_sb->s_blocksize; | 
 |  | 
 | 	max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1) | 
 | 					>> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
 | 	if (end >= max_block) | 
 | 		end = max_block; | 
 | 	if ((start >= end) || (start > max_block)) | 
 | 		return 0; | 
 |  | 
 | 	n = ext4_block_to_path(inode, start, offsets, NULL); | 
 | 	n2 = ext4_block_to_path(inode, end, offsets2, NULL); | 
 |  | 
 | 	BUG_ON(n > n2); | 
 |  | 
 | 	if ((n == 1) && (n == n2)) { | 
 | 		/* We're punching only within direct block range */ | 
 | 		ext4_free_data(handle, inode, NULL, i_data + offsets[0], | 
 | 			       i_data + offsets2[0]); | 
 | 		return 0; | 
 | 	} else if (n2 > n) { | 
 | 		/* | 
 | 		 * Start and end are on a different levels so we're going to | 
 | 		 * free partial block at start, and partial block at end of | 
 | 		 * the range. If there are some levels in between then | 
 | 		 * do_indirects label will take care of that. | 
 | 		 */ | 
 |  | 
 | 		if (n == 1) { | 
 | 			/* | 
 | 			 * Start is at the direct block level, free | 
 | 			 * everything to the end of the level. | 
 | 			 */ | 
 | 			ext4_free_data(handle, inode, NULL, i_data + offsets[0], | 
 | 				       i_data + EXT4_NDIR_BLOCKS); | 
 | 			goto end_range; | 
 | 		} | 
 |  | 
 |  | 
 | 		partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); | 
 | 		if (nr) { | 
 | 			if (partial == chain) { | 
 | 				/* Shared branch grows from the inode */ | 
 | 				ext4_free_branches(handle, inode, NULL, | 
 | 					   &nr, &nr+1, (chain+n-1) - partial); | 
 | 				*partial->p = 0; | 
 | 			} else { | 
 | 				/* Shared branch grows from an indirect block */ | 
 | 				BUFFER_TRACE(partial->bh, "get_write_access"); | 
 | 				ext4_free_branches(handle, inode, partial->bh, | 
 | 					partial->p, | 
 | 					partial->p+1, (chain+n-1) - partial); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Clear the ends of indirect blocks on the shared branch | 
 | 		 * at the start of the range | 
 | 		 */ | 
 | 		while (partial > chain) { | 
 | 			ext4_free_branches(handle, inode, partial->bh, | 
 | 				partial->p + 1, | 
 | 				(__le32 *)partial->bh->b_data+addr_per_block, | 
 | 				(chain+n-1) - partial); | 
 | 			partial--; | 
 | 		} | 
 |  | 
 | end_range: | 
 | 		partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); | 
 | 		if (nr2) { | 
 | 			if (partial2 == chain2) { | 
 | 				/* | 
 | 				 * Remember, end is exclusive so here we're at | 
 | 				 * the start of the next level we're not going | 
 | 				 * to free. Everything was covered by the start | 
 | 				 * of the range. | 
 | 				 */ | 
 | 				goto do_indirects; | 
 | 			} | 
 | 		} else { | 
 | 			/* | 
 | 			 * ext4_find_shared returns Indirect structure which | 
 | 			 * points to the last element which should not be | 
 | 			 * removed by truncate. But this is end of the range | 
 | 			 * in punch_hole so we need to point to the next element | 
 | 			 */ | 
 | 			partial2->p++; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Clear the ends of indirect blocks on the shared branch | 
 | 		 * at the end of the range | 
 | 		 */ | 
 | 		while (partial2 > chain2) { | 
 | 			ext4_free_branches(handle, inode, partial2->bh, | 
 | 					   (__le32 *)partial2->bh->b_data, | 
 | 					   partial2->p, | 
 | 					   (chain2+n2-1) - partial2); | 
 | 			partial2--; | 
 | 		} | 
 | 		goto do_indirects; | 
 | 	} | 
 |  | 
 | 	/* Punch happened within the same level (n == n2) */ | 
 | 	partial = p = ext4_find_shared(inode, n, offsets, chain, &nr); | 
 | 	partial2 = p2 = ext4_find_shared(inode, n2, offsets2, chain2, &nr2); | 
 |  | 
 | 	/* Free top, but only if partial2 isn't its subtree. */ | 
 | 	if (nr) { | 
 | 		int level = min(partial - chain, partial2 - chain2); | 
 | 		int i; | 
 | 		int subtree = 1; | 
 |  | 
 | 		for (i = 0; i <= level; i++) { | 
 | 			if (offsets[i] != offsets2[i]) { | 
 | 				subtree = 0; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (!subtree) { | 
 | 			if (partial == chain) { | 
 | 				/* Shared branch grows from the inode */ | 
 | 				ext4_free_branches(handle, inode, NULL, | 
 | 						   &nr, &nr+1, | 
 | 						   (chain+n-1) - partial); | 
 | 				*partial->p = 0; | 
 | 			} else { | 
 | 				/* Shared branch grows from an indirect block */ | 
 | 				BUFFER_TRACE(partial->bh, "get_write_access"); | 
 | 				ext4_free_branches(handle, inode, partial->bh, | 
 | 						   partial->p, | 
 | 						   partial->p+1, | 
 | 						   (chain+n-1) - partial); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!nr2) { | 
 | 		/* | 
 | 		 * ext4_find_shared returns Indirect structure which | 
 | 		 * points to the last element which should not be | 
 | 		 * removed by truncate. But this is end of the range | 
 | 		 * in punch_hole so we need to point to the next element | 
 | 		 */ | 
 | 		partial2->p++; | 
 | 	} | 
 |  | 
 | 	while (partial > chain || partial2 > chain2) { | 
 | 		int depth = (chain+n-1) - partial; | 
 | 		int depth2 = (chain2+n2-1) - partial2; | 
 |  | 
 | 		if (partial > chain && partial2 > chain2 && | 
 | 		    partial->bh->b_blocknr == partial2->bh->b_blocknr) { | 
 | 			/* | 
 | 			 * We've converged on the same block. Clear the range, | 
 | 			 * then we're done. | 
 | 			 */ | 
 | 			ext4_free_branches(handle, inode, partial->bh, | 
 | 					   partial->p + 1, | 
 | 					   partial2->p, | 
 | 					   (chain+n-1) - partial); | 
 | 			goto cleanup; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * The start and end partial branches may not be at the same | 
 | 		 * level even though the punch happened within one level. So, we | 
 | 		 * give them a chance to arrive at the same level, then walk | 
 | 		 * them in step with each other until we converge on the same | 
 | 		 * block. | 
 | 		 */ | 
 | 		if (partial > chain && depth <= depth2) { | 
 | 			ext4_free_branches(handle, inode, partial->bh, | 
 | 					   partial->p + 1, | 
 | 					   (__le32 *)partial->bh->b_data+addr_per_block, | 
 | 					   (chain+n-1) - partial); | 
 | 			partial--; | 
 | 		} | 
 | 		if (partial2 > chain2 && depth2 <= depth) { | 
 | 			ext4_free_branches(handle, inode, partial2->bh, | 
 | 					   (__le32 *)partial2->bh->b_data, | 
 | 					   partial2->p, | 
 | 					   (chain2+n2-1) - partial2); | 
 | 			partial2--; | 
 | 		} | 
 | 	} | 
 |  | 
 | cleanup: | 
 | 	while (p && p > chain) { | 
 | 		BUFFER_TRACE(p->bh, "call brelse"); | 
 | 		brelse(p->bh); | 
 | 		p--; | 
 | 	} | 
 | 	while (p2 && p2 > chain2) { | 
 | 		BUFFER_TRACE(p2->bh, "call brelse"); | 
 | 		brelse(p2->bh); | 
 | 		p2--; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | do_indirects: | 
 | 	/* Kill the remaining (whole) subtrees */ | 
 | 	switch (offsets[0]) { | 
 | 	default: | 
 | 		if (++n >= n2) | 
 | 			break; | 
 | 		nr = i_data[EXT4_IND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | 
 | 			i_data[EXT4_IND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_IND_BLOCK: | 
 | 		if (++n >= n2) | 
 | 			break; | 
 | 		nr = i_data[EXT4_DIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | 
 | 			i_data[EXT4_DIND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_DIND_BLOCK: | 
 | 		if (++n >= n2) | 
 | 			break; | 
 | 		nr = i_data[EXT4_TIND_BLOCK]; | 
 | 		if (nr) { | 
 | 			ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | 
 | 			i_data[EXT4_TIND_BLOCK] = 0; | 
 | 		} | 
 | 		fallthrough; | 
 | 	case EXT4_TIND_BLOCK: | 
 | 		; | 
 | 	} | 
 | 	goto cleanup; | 
 | } |