blob: 97683f6a29361639f5b6e88efd11a0c69d5480dc [file] [log] [blame]
/*
* T4240QDS Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t4240si-pre.dtsi"
/ {
model = "fsl,T4240QDS";
compatible = "fsl,T4240QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 10MB for Linux Kernel Image */
reg = <0x00200000 0x00A00000>;
label = "NAND Linux Kernel Image";
};
partition@C00000 {
/* 500MB for Root file System Image */
reg = <0x00c00000 0x1F400000>;
label = "NAND RFS Image";
};
};
board-control@3,0 {
compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
reg = <3 0 0x300>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf040";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
};
i2c@118000 {
mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@51 {
compatible = "at24,24c256";
reg = <0x51>;
};
eeprom@52 {
compatible = "at24,24c256";
reg = <0x52>;
};
eeprom@53 {
compatible = "at24,24c256";
reg = <0x53>;
};
eeprom@54 {
compatible = "at24,24c256";
reg = <0x54>;
};
eeprom@55 {
compatible = "at24,24c256";
reg = <0x55>;
};
eeprom@56 {
compatible = "at24,24c256";
reg = <0x56>;
};
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
ina220@44 {
compatible = "ti,ina220";
reg = <0x44>;
shunt-resistor = <1000>;
};
ina220@45 {
compatible = "ti,ina220";
reg = <0x45>;
shunt-resistor = <1000>;
};
ina220@46 {
compatible = "ti,ina220";
reg = <0x46>;
shunt-resistor = <1000>;
};
ina220@47 {
compatible = "ti,ina220";
reg = <0x47>;
shunt-resistor = <1000>;
};
};
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "fsl/t4240si-post.dtsi"