| From 4e6d2d9449c95e80ec2638c306dead05595cf1c3 Mon Sep 17 00:00:00 2001 |
| From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
| Date: Fri, 11 Nov 2016 15:13:26 +0200 |
| Subject: [PATCH 113/299] usb: host: xhci: rcar: add a new firmware version for |
| r8a7796 |
| |
| This patch adds a new firmware version "V3" for r8a7796. This patch |
| also adds explanation of each version's information. |
| |
| Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
| Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> |
| Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
| (cherry picked from commit 125f0c0ca06555f7992ededc538580454c9b6996) |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| --- |
| drivers/usb/host/xhci-rcar.c | 3 +++ |
| drivers/usb/host/xhci-rcar.h | 1 + |
| 2 files changed, 4 insertions(+) |
| |
| --- a/drivers/usb/host/xhci-rcar.c |
| +++ b/drivers/usb/host/xhci-rcar.c |
| @@ -19,6 +19,8 @@ |
| #include "xhci-rcar.h" |
| |
| /* |
| +* - The V3 firmware is for r8a7796 (with good performance). |
| +* - The V2 firmware can be used on both r8a7795 (es1.x) and r8a7796. |
| * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes |
| * performance degradation. So, this driver continues to use the V1 if R-Car |
| * Gen2. |
| @@ -26,6 +28,7 @@ |
| */ |
| MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); |
| MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); |
| +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); |
| |
| /*** Register Offset ***/ |
| #define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ |
| --- a/drivers/usb/host/xhci-rcar.h |
| +++ b/drivers/usb/host/xhci-rcar.h |
| @@ -13,6 +13,7 @@ |
| |
| #define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem" |
| #define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem" |
| +#define XHCI_RCAR_FIRMWARE_NAME_V3 "r8a779x_usb3_v3.dlmem" |
| |
| #if IS_ENABLED(CONFIG_USB_XHCI_RCAR) |
| void xhci_rcar_start(struct usb_hcd *hcd); |