| From cc8c1076576fbdfe87a8c25a94ee0ae99bf8e5b5 Mon Sep 17 00:00:00 2001 |
| From: Simon Horman <horms+renesas@verge.net.au> |
| Date: Tue, 13 Dec 2016 12:45:50 +0100 |
| Subject: [PATCH 075/255] ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding |
| for i2c nodes |
| |
| Use recently added R-Car Gen 2 fallback binding for i2c nodes in |
| DT for r8a7791 SoC. |
| |
| This has no run-time effect for the current driver as the initialisation |
| sequence is the same for the SoC-specific binding for r8a7791 and the |
| fallback binding for R-Car Gen 2. |
| |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> |
| (cherry picked from commit c7407ca7ef61ff91cfa3c130de59061171102cf3) |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| --- |
| arch/arm/boot/dts/r8a7791.dtsi | 12 ++++++------ |
| 1 file changed, 6 insertions(+), 6 deletions(-) |
| |
| --- a/arch/arm/boot/dts/r8a7791.dtsi |
| +++ b/arch/arm/boot/dts/r8a7791.dtsi |
| @@ -444,7 +444,7 @@ |
| i2c0: i2c@e6508000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6508000 0 0x40>; |
| interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C0>; |
| @@ -456,7 +456,7 @@ |
| i2c1: i2c@e6518000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6518000 0 0x40>; |
| interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C1>; |
| @@ -468,7 +468,7 @@ |
| i2c2: i2c@e6530000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6530000 0 0x40>; |
| interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C2>; |
| @@ -480,7 +480,7 @@ |
| i2c3: i2c@e6540000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6540000 0 0x40>; |
| interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C3>; |
| @@ -492,7 +492,7 @@ |
| i2c4: i2c@e6520000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6520000 0 0x40>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C4>; |
| @@ -505,7 +505,7 @@ |
| /* doesn't need pinmux */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| - compatible = "renesas,i2c-r8a7791"; |
| + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; |
| reg = <0 0xe6528000 0 0x40>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&mstp9_clks R8A7791_CLK_I2C5>; |
