| From e49034d60f2aa317528c33a43d0dba3f0d1f2a5b Mon Sep 17 00:00:00 2001 |
| From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
| Date: Fri, 6 Dec 2013 10:59:49 +0100 |
| Subject: sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports |
| |
| SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the |
| value specified in the datasheet. This is currently handled by a custom |
| baud rate calculation algorithm. The algorithm ID will be removed from |
| platform data, set the sampling rate directly instead. |
| |
| Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| (cherry picked from commit 64c535e942af6cfe59ceceeb9bc6ba5f437a2fc9) |
| (Queued by Simon Horman for v3.14 but not yet in Linus's tree) |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| --- |
| arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 6 +++--- |
| arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 6 +++--- |
| 2 files changed, 6 insertions(+), 6 deletions(-) |
| |
| diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c |
| index 521a09ef4ffe..079951be4122 100644 |
| --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c |
| +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c |
| @@ -98,7 +98,7 @@ static struct plat_sci_port scif3_platform_data = { |
| .flags = UPF_BOOT_AUTOCONF, |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| @@ -121,7 +121,7 @@ static struct plat_sci_port scif4_platform_data = { |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .flags = UPF_BOOT_AUTOCONF, |
| .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| @@ -144,7 +144,7 @@ static struct plat_sci_port scif5_platform_data = { |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .flags = UPF_BOOT_AUTOCONF, |
| .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c |
| index fb0a23749147..59c359469f13 100644 |
| --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c |
| +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c |
| @@ -365,7 +365,7 @@ static struct plat_sci_port scif3_platform_data = { |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .flags = UPF_BOOT_AUTOCONF, |
| .scscr = SCSCR_RE | SCSCR_TE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| @@ -388,7 +388,7 @@ static struct plat_sci_port scif4_platform_data = { |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .flags = UPF_BOOT_AUTOCONF, |
| .scscr = SCSCR_RE | SCSCR_TE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| @@ -411,7 +411,7 @@ static struct plat_sci_port scif5_platform_data = { |
| .port_reg = SCIx_NOT_SUPPORTED, |
| .flags = UPF_BOOT_AUTOCONF, |
| .scscr = SCSCR_RE | SCSCR_TE, |
| - .scbrr_algo_id = SCBRR_ALGO_3, |
| + .sampling_rate = 8, |
| .type = PORT_SCIFA, |
| }; |
| |
| -- |
| 1.8.5.rc3 |
| |