| From 3043f5c7040af46b5efc9908f6af48d908835ca9 Mon Sep 17 00:00:00 2001 |
| From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> |
| Date: Wed, 16 May 2018 03:58:53 +0200 |
| Subject: [PATCH 1560/1795] arm64: dts: renesas: salvator-common: Add ADV7482 |
| support |
| MIME-Version: 1.0 |
| Content-Type: text/plain; charset=UTF-8 |
| Content-Transfer-Encoding: 8bit |
| |
| The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs. |
| |
| Provide ADV7482 node on the i2c4 bus, along with connectors for the |
| hdmi and cvbs inputs, and link to the csi20 and csi40 nodes as outputs. |
| |
| Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> |
| Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
| Signed-off-by: Niklas Sรถderlund <niklas.soderlund+renesas@ragnatech.se> |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| (cherry picked from commit 908001d778eba06ee1d832863d4e9a1e2cfd4746) |
| Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
| Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
| --- |
| .../boot/dts/renesas/salvator-common.dtsi | 103 ++++++++++++++++++ |
| 1 file changed, 103 insertions(+) |
| |
| diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi |
| index 263e5787270e..9256fbaaab7f 100644 |
| --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi |
| +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi |
| @@ -66,6 +66,29 @@ |
| enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| + cvbs-in { |
| + compatible = "composite-video-connector"; |
| + label = "CVBS IN"; |
| + |
| + port { |
| + cvbs_con: endpoint { |
| + remote-endpoint = <&adv7482_ain7>; |
| + }; |
| + }; |
| + }; |
| + |
| + hdmi-in { |
| + compatible = "hdmi-connector"; |
| + label = "HDMI IN"; |
| + type = "a"; |
| + |
| + port { |
| + hdmi_in_con: endpoint { |
| + remote-endpoint = <&adv7482_hdmi>; |
| + }; |
| + }; |
| + }; |
| + |
| reg_1p8v: regulator0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-1.8V"; |
| @@ -260,6 +283,37 @@ |
| }; |
| }; |
| |
| +&csi20 { |
| + status = "okay"; |
| + |
| + ports { |
| + port@0 { |
| + reg = <0>; |
| + csi20_in: endpoint { |
| + clock-lanes = <0>; |
| + data-lanes = <1>; |
| + remote-endpoint = <&adv7482_txb>; |
| + }; |
| + }; |
| + }; |
| +}; |
| + |
| +&csi40 { |
| + status = "okay"; |
| + |
| + ports { |
| + port@0 { |
| + reg = <0>; |
| + |
| + csi40_in: endpoint { |
| + clock-lanes = <0>; |
| + data-lanes = <1 2 3 4>; |
| + remote-endpoint = <&adv7482_txa>; |
| + }; |
| + }; |
| + }; |
| +}; |
| + |
| &du { |
| pinctrl-0 = <&du_pins>; |
| pinctrl-names = "default"; |
| @@ -357,6 +411,55 @@ |
| |
| shunt-resistor-micro-ohms = <5000>; |
| }; |
| + |
| + video-receiver@70 { |
| + compatible = "adi,adv7482"; |
| + reg = <0x70>; |
| + |
| + #address-cells = <1>; |
| + #size-cells = <0>; |
| + |
| + interrupt-parent = <&gpio6>; |
| + interrupt-names = "intrq1", "intrq2"; |
| + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, |
| + <31 IRQ_TYPE_LEVEL_LOW>; |
| + |
| + port@7 { |
| + reg = <7>; |
| + |
| + adv7482_ain7: endpoint { |
| + remote-endpoint = <&cvbs_con>; |
| + }; |
| + }; |
| + |
| + port@8 { |
| + reg = <8>; |
| + |
| + adv7482_hdmi: endpoint { |
| + remote-endpoint = <&hdmi_in_con>; |
| + }; |
| + }; |
| + |
| + port@10 { |
| + reg = <10>; |
| + |
| + adv7482_txa: endpoint { |
| + clock-lanes = <0>; |
| + data-lanes = <1 2 3 4>; |
| + remote-endpoint = <&csi40_in>; |
| + }; |
| + }; |
| + |
| + port@11 { |
| + reg = <11>; |
| + |
| + adv7482_txb: endpoint { |
| + clock-lanes = <0>; |
| + data-lanes = <1>; |
| + remote-endpoint = <&csi20_in>; |
| + }; |
| + }; |
| + }; |
| }; |
| |
| &i2c_dvfs { |
| -- |
| 2.19.0 |
| |