MCONFIG - pub/scm/linux/kernel/git/luto/util-linux-playground - Git at Google

 # MCONFIG -- Configuration stuff for util-linux
 # Created: Sat Feb  4 15:50:30 1995
 # Copyright 1995 Rickard E. Faith (faith@cs.unc.edu)

 # For a user-mode install, make (at least) three changes:
 #  - remove the `-o root' part in INSTALLSUID
 #  - set USE_TTY_GROUP=no
 #  - define DESTDIR

 # Select for ARCH one of intel, alpha, sparc, arm, m68k, mips
 # Select for CPU i386 if the binaries must be able to run on an intel 386
 # (by default i486 code is generated, see below)
 CPU=$(shell uname -m)
 ARCH=$(shell echo $(CPU) | sed 's/i.86/intel/;s/arm.*/arm/')

 # If HAVE_PAM is set to "yes", then login, chfn, chsh, and newgrp
 # will use PAM for authentication. Additionally, passwd will not be
 # installed as it is not PAM aware.
 HAVE_PAM=no

 # If HAVE_SHADOW is set to "yes", then login, chfn, chsh, newgrp, passwd,
 # and vipw will not be built or installed from the login-utils
 # subdirectory.
 HAVE_SHADOW=yes

 # If HAVE_PASSWD is set to "yes", then passwd will not be built or
 # installed from the login-utils subdirectory (but login, chfn, chsh,
 # newgrp, and vipw *will* be installed).
 HAVE_PASSWD=no

 # If you use chfn and chsh from this package, REQUIRE_PASSWORD will require
 # non-root users to enter the account password before updating /etc/passwd.
 REQUIRE_PASSWORD=yes
 #REQUIRE_PASSWORD=no

 # If you use chsh from this package, ONLY_LISTED_SHELLS will require that
 # the selected shell be listed in /etc/shells -- otherwise only a warning is
 # printed.  This prevents someone from setting their shell to /bin/false.
 ONLY_LISTED_SHELLS=yes
 #ONLY_LISTED_SHELLS=no


 # If HAVE_SYSVINIT is set to "yes", then simpleinit and shutdown will not
 # be built or installed from the login-utils subdirectory.  (The shutdown
 # and halt that come with the SysVinit package should be used with the init
 # found in that package.)
 HAVE_SYSVINIT=yes

 # If HAVE_SYSVINIT_UTILS is set to "yes", then last, mesg, and wall will
 # not be built or installed from the login-utils subdirectory.  (The
 # shutdown and init from the SysVinit package do not depend on the last,
 # mesg, and wall from that package.)
 HAVE_SYSVINIT_UTILS=yes

 # If HAVE_WRITE is set to "yes", then write will not be built or
 # installed from the misc-utils subdirectory.
 # (There is a network aware write in netwrite from NetKit 0.16 or later.)
 HAVE_WRITE=no

 # If HAVE_GETTY is set to "yes", then agetty will not be built or
 # installed from the login-utils subdirectory.  Note that agetty can
 # co-exist with other gettys, so this option should never be used.
 HAVE_GETTY=no

 # If USE_TTY_GROUP is set to "yes", then wall and write will be installed
 # setgid to the "tty" group, and mesg will only set the group write bit.
 # Note that this is only useful if login/xterm/etc. change the group of the
 # user's tty to "tty" [The login in util-linux does this correctly, and
 # xterm will do it correctly if X is compiled with USE_TTY_GROUP set
 # properly.]
 USE_TTY_GROUP=yes

 # If HAVE_KILL is set to "yes", then kill will not be built or
 # installed from the misc-utils subdirectory.
 # (There is also a kill in the procps package.)
 HAVE_KILL=no

 # If ALLOW_VCS_USE is set to "yes", then login will chown /dev/vcsN
 # to the current user, allowing her to make a screendump and do other
 # nifty things on the console, but also allowing him to keep an open
 # file descriptor after logging out to trick the next user.
 ALLOW_VCS_USE=yes

 # If HAVE_RESET is set to "yes", then reset won't be installed.  The version
 # of reset that comes with the ncurses package is less aggressive.
 HAVE_RESET=yes

 # If HAVE_SLN is set to "yes", then sln won't be installed
 # (but the man page sln.8 will be installed anyway).
 # sln also comes with libc and glibc.
 HAVE_SLN=no

 # If HAVE_FDUTILS is set to "yes", then setfdprm won't be installed.
 HAVE_FDUTILS=no

 # If SILENT_PG is set to "yes", then pg will not ring the bell
 # when an invalid key is pressed
 SILENT_PG=no

 # If configure decides that Native Language Support (NLS) is available,
 # it sets MAY_ENABLE_NLS in defines.h. If you don't want NLS, set
 # DISABLE_NLS to "yes".
 DISABLE_NLS=no

 # Different optimizations for different cpus.
 # gcc 3.0 likes options -mcpu=i486 instead of -m486
 ifeq "$(ARCH)" "intel"
   ifeq "$(HAVE_OLD_GCC)" "yes"
     CPUHEAD=-m
   else
     CPUHEAD=-mcpu=i
   endif
   ifeq "$(CPU)" "i386"
     CPUTAIL=386
   else
     CPUTAIL=486
   endif
   CPUOPT= $(CPUHEAD)$(CPUTAIL)
   OPT=          -pipe -O2 $(CPUOPT) -fomit-frame-pointer
 else
   ifeq "$(ARCH)" "arm"
     OPT=	-pipe -O2 -fsigned-char -fomit-frame-pointer
   else
     OPT=	-O2 -fomit-frame-pointer
   endif
 endif

 WARNFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes

 LIB=../lib

 ERR_O=$(LIB)/err.o

 # Set HAVE_SLANG to yes if you have slang (and prefer to use that for cfdisk)
 # (If neither HAVE_NCURSES nor HAVE_SLANG is defined, cfdisk is not made.)
 # HAVE_SLANG=yes
 # There is a subdirectory /usr/include/slang containing slcurses.h
 # SLANGFLAGS=-I/usr/include/slang
 # No such subdirectory - slcurses.h lives in /usr/include
 #   (no extra definition required).
 LIBSLANG=-lslang

 #
 # Paths used for compilation (not all are actually used, see CFLAGS below)
 #
 DEV_DIR=	/dev
 ETC_DIR=	/etc
 SBIN_DIR=	/sbin
 USRSBIN_DIR=	/usr/sbin
 USRLIB_DIR=	/usr/lib
 USRBIN_DIR=	/usr/bin
 USRGAMES_DIR=	/usr/games
 USRSHAREMISC_DIR=/usr/share/misc
 LOCALE_DIR=	/usr/share/locale
 BIN_DIR=        /bin
 VAR_PATH=	/var
 LOG_DIR=	/var/log
 MAN_DIR=	/usr/share/man
 INFO_DIR=	/usr/share/info

 #
 # Paths used for install
 #
 DEVDIR=		$(DESTDIR)$(DEV_DIR)
 ETCDIR=		$(DESTDIR)$(ETC_DIR)
 SBINDIR=	$(DESTDIR)$(SBIN_DIR)
 USRSBINDIR=	$(DESTDIR)$(USRSBIN_DIR)
 USRLIBDIR=      $(DESTDIR)$(USRLIB_DIR)
 USRBINDIR=      $(DESTDIR)$(USRBIN_DIR)
 USRGAMESDIR=    $(DESTDIR)$(USRGAMES_DIR)
 USRSHAREMISCDIR=$(DESTDIR)$(USRSHAREMISC_DIR)
 LOCALEDIR=      $(DESTDIR)$(LOCALE_DIR)
 BINDIR=         $(DESTDIR)$(BIN_DIR)
 VARPATH=	$(DESTDIR)$(VAR_PATH)
 LOGDIR=		$(DESTDIR)$(LOG_DIR)
 MANDIR=		$(DESTDIR)$(MAN_DIR)
 MAN1DIR=	$(MANDIR)/man1
 MAN3DIR=	$(MANDIR)/man3
 MAN5DIR=	$(MANDIR)/man5
 MAN6DIR=	$(MANDIR)/man6
 MAN8DIR=	$(MANDIR)/man8
 INFODIR=	$(DESTDIR)$(INFO_DIR)

 # Directory for shutdown, halt, reboot, etc.
 SHUTDOWNDIR=	$(SBINDIR)

 # Modes
 DIRMODE=	755
 BINMODE=	755
 MANMODE=	644
 DATMODE=	644
 INFOMODE=	644
 SUIDMODE=      4755

 CHMOD=		chmod
 INSTALL=	install
 INSTALLDIR=	$(INSTALL) -d -m $(DIRMODE)
 INSTALLBIN=	$(INSTALL) -m $(BINMODE)
 INSTALLMAN=	$(INSTALL) -m $(MANMODE)
 INSTALLDAT=	$(INSTALL) -m $(DATMODE)
 INSTALLSUID=    $(INSTALL) -m $(SUIDMODE) -o root

 ifeq "$(DISABLE_NLS)" "yes"
 NLSFLAGS = -DDISABLE_NLS
 endif

 CFLAGS := $(OPT) -I$(LIB) $(WARNFLAGS) \
 			$(CURSESFLAGS) $(SLANGFLAGS) $(NLSFLAGS) \
 			-D_FILE_OFFSET_BITS=64 \
 			-DSBINDIR=\"$(SBIN_DIR)\" \
 			-DUSRSBINDIR=\"$(USRSBIN_DIR)\" \
 			-DLOGDIR=\"$(LOG_DIR)\" \
 			-DVARPATH=\"$(VAR_PATH)\" \
 			-DLOCALEDIR=\"$(LOCALE_DIR)\" \
 			$(CFLAGS)


 %.o: %.c
 	$(CC) -c $(CFLAGS) $< -o $@

 %: %.cc
 	$(CXX) $(CFLAGS) $< -o $@
	# MCONFIG -- Configuration stuff for util-linux
	# Created: Sat Feb 4 15:50:30 1995
	# Copyright 1995 Rickard E. Faith (faith@cs.unc.edu)

	# For a user-mode install, make (at least) three changes:
	# - remove the `-o root' part in INSTALLSUID
	# - set USE_TTY_GROUP=no
	# - define DESTDIR

	# Select for ARCH one of intel, alpha, sparc, arm, m68k, mips
	# Select for CPU i386 if the binaries must be able to run on an intel 386
	# (by default i486 code is generated, see below)
	CPU=$(shell uname -m)
	ARCH=$(shell echo $(CPU) \| sed 's/i.86/intel/;s/arm.*/arm/')

	# If HAVE_PAM is set to "yes", then login, chfn, chsh, and newgrp
	# will use PAM for authentication. Additionally, passwd will not be
	# installed as it is not PAM aware.
	HAVE_PAM=no

	# If HAVE_SHADOW is set to "yes", then login, chfn, chsh, newgrp, passwd,
	# and vipw will not be built or installed from the login-utils
	# subdirectory.
	HAVE_SHADOW=yes

	# If HAVE_PASSWD is set to "yes", then passwd will not be built or
	# installed from the login-utils subdirectory (but login, chfn, chsh,
	# newgrp, and vipw will be installed).
	HAVE_PASSWD=no

	# If you use chfn and chsh from this package, REQUIRE_PASSWORD will require
	# non-root users to enter the account password before updating /etc/passwd.
	REQUIRE_PASSWORD=yes
	#REQUIRE_PASSWORD=no

	# If you use chsh from this package, ONLY_LISTED_SHELLS will require that
	# the selected shell be listed in /etc/shells -- otherwise only a warning is
	# printed. This prevents someone from setting their shell to /bin/false.
	ONLY_LISTED_SHELLS=yes
	#ONLY_LISTED_SHELLS=no


	# If HAVE_SYSVINIT is set to "yes", then simpleinit and shutdown will not
	# be built or installed from the login-utils subdirectory. (The shutdown
	# and halt that come with the SysVinit package should be used with the init
	# found in that package.)
	HAVE_SYSVINIT=yes

	# If HAVE_SYSVINIT_UTILS is set to "yes", then last, mesg, and wall will
	# not be built or installed from the login-utils subdirectory. (The
	# shutdown and init from the SysVinit package do not depend on the last,
	# mesg, and wall from that package.)
	HAVE_SYSVINIT_UTILS=yes

	# If HAVE_WRITE is set to "yes", then write will not be built or
	# installed from the misc-utils subdirectory.
	# (There is a network aware write in netwrite from NetKit 0.16 or later.)
	HAVE_WRITE=no

	# If HAVE_GETTY is set to "yes", then agetty will not be built or
	# installed from the login-utils subdirectory. Note that agetty can
	# co-exist with other gettys, so this option should never be used.
	HAVE_GETTY=no

	# If USE_TTY_GROUP is set to "yes", then wall and write will be installed
	# setgid to the "tty" group, and mesg will only set the group write bit.
	# Note that this is only useful if login/xterm/etc. change the group of the
	# user's tty to "tty" [The login in util-linux does this correctly, and
	# xterm will do it correctly if X is compiled with USE_TTY_GROUP set
	# properly.]
	USE_TTY_GROUP=yes

	# If HAVE_KILL is set to "yes", then kill will not be built or
	# installed from the misc-utils subdirectory.
	# (There is also a kill in the procps package.)
	HAVE_KILL=no

	# If ALLOW_VCS_USE is set to "yes", then login will chown /dev/vcsN
	# to the current user, allowing her to make a screendump and do other
	# nifty things on the console, but also allowing him to keep an open
	# file descriptor after logging out to trick the next user.
	ALLOW_VCS_USE=yes

	# If HAVE_RESET is set to "yes", then reset won't be installed. The version
	# of reset that comes with the ncurses package is less aggressive.
	HAVE_RESET=yes

	# If HAVE_SLN is set to "yes", then sln won't be installed
	# (but the man page sln.8 will be installed anyway).
	# sln also comes with libc and glibc.
	HAVE_SLN=no

	# If HAVE_FDUTILS is set to "yes", then setfdprm won't be installed.
	HAVE_FDUTILS=no

	# If SILENT_PG is set to "yes", then pg will not ring the bell
	# when an invalid key is pressed
	SILENT_PG=no

	# If configure decides that Native Language Support (NLS) is available,
	# it sets MAY_ENABLE_NLS in defines.h. If you don't want NLS, set
	# DISABLE_NLS to "yes".
	DISABLE_NLS=no

	# Different optimizations for different cpus.
	# gcc 3.0 likes options -mcpu=i486 instead of -m486
	ifeq "$(ARCH)" "intel"
	ifeq "$(HAVE_OLD_GCC)" "yes"
	CPUHEAD=-m
	else
	CPUHEAD=-mcpu=i
	endif
	ifeq "$(CPU)" "i386"
	CPUTAIL=386
	else
	CPUTAIL=486
	endif
	CPUOPT= $(CPUHEAD)$(CPUTAIL)
	OPT= -pipe -O2 $(CPUOPT) -fomit-frame-pointer
	else
	ifeq "$(ARCH)" "arm"
	OPT= -pipe -O2 -fsigned-char -fomit-frame-pointer
	else
	OPT= -O2 -fomit-frame-pointer
	endif
	endif

	WARNFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes

	LIB=../lib

	ERR_O=$(LIB)/err.o

	# Set HAVE_SLANG to yes if you have slang (and prefer to use that for cfdisk)
	# (If neither HAVE_NCURSES nor HAVE_SLANG is defined, cfdisk is not made.)
	# HAVE_SLANG=yes
	# There is a subdirectory /usr/include/slang containing slcurses.h
	# SLANGFLAGS=-I/usr/include/slang
	# No such subdirectory - slcurses.h lives in /usr/include
	# (no extra definition required).
	LIBSLANG=-lslang

	#
	# Paths used for compilation (not all are actually used, see CFLAGS below)
	#
	DEV_DIR= /dev
	ETC_DIR= /etc
	SBIN_DIR= /sbin
	USRSBIN_DIR= /usr/sbin
	USRLIB_DIR= /usr/lib
	USRBIN_DIR= /usr/bin
	USRGAMES_DIR= /usr/games
	USRSHAREMISC_DIR=/usr/share/misc
	LOCALE_DIR= /usr/share/locale
	BIN_DIR= /bin
	VAR_PATH= /var
	LOG_DIR= /var/log
	MAN_DIR= /usr/share/man
	INFO_DIR= /usr/share/info

	#
	# Paths used for install
	#
	DEVDIR= $(DESTDIR)$(DEV_DIR)
	ETCDIR= $(DESTDIR)$(ETC_DIR)
	SBINDIR= $(DESTDIR)$(SBIN_DIR)
	USRSBINDIR= $(DESTDIR)$(USRSBIN_DIR)
	USRLIBDIR= $(DESTDIR)$(USRLIB_DIR)
	USRBINDIR= $(DESTDIR)$(USRBIN_DIR)
	USRGAMESDIR= $(DESTDIR)$(USRGAMES_DIR)
	USRSHAREMISCDIR=$(DESTDIR)$(USRSHAREMISC_DIR)
	LOCALEDIR= $(DESTDIR)$(LOCALE_DIR)
	BINDIR= $(DESTDIR)$(BIN_DIR)
	VARPATH= $(DESTDIR)$(VAR_PATH)
	LOGDIR= $(DESTDIR)$(LOG_DIR)
	MANDIR= $(DESTDIR)$(MAN_DIR)
	MAN1DIR= $(MANDIR)/man1
	MAN3DIR= $(MANDIR)/man3
	MAN5DIR= $(MANDIR)/man5
	MAN6DIR= $(MANDIR)/man6
	MAN8DIR= $(MANDIR)/man8
	INFODIR= $(DESTDIR)$(INFO_DIR)

	# Directory for shutdown, halt, reboot, etc.
	SHUTDOWNDIR= $(SBINDIR)

	# Modes
	DIRMODE= 755
	BINMODE= 755
	MANMODE= 644
	DATMODE= 644
	INFOMODE= 644
	SUIDMODE= 4755

	CHMOD= chmod
	INSTALL= install
	INSTALLDIR= $(INSTALL) -d -m $(DIRMODE)
	INSTALLBIN= $(INSTALL) -m $(BINMODE)
	INSTALLMAN= $(INSTALL) -m $(MANMODE)
	INSTALLDAT= $(INSTALL) -m $(DATMODE)
	INSTALLSUID= $(INSTALL) -m $(SUIDMODE) -o root

	ifeq "$(DISABLE_NLS)" "yes"
	NLSFLAGS = -DDISABLE_NLS
	endif

	CFLAGS := $(OPT) -I$(LIB) $(WARNFLAGS) \
	$(CURSESFLAGS) $(SLANGFLAGS) $(NLSFLAGS) \
	-D_FILE_OFFSET_BITS=64 \
	-DSBINDIR=\"$(SBIN_DIR)\" \
	-DUSRSBINDIR=\"$(USRSBIN_DIR)\" \
	-DLOGDIR=\"$(LOG_DIR)\" \
	-DVARPATH=\"$(VAR_PATH)\" \
	-DLOCALEDIR=\"$(LOCALE_DIR)\" \
	$(CFLAGS)


	%.o: %.c
	$(CC) -c $(CFLAGS) $< -o $@

	%: %.cc
	$(CXX) $(CFLAGS) $< -o $@