|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Self tests for device tree subsystem | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) "### dt-test ### " fmt | 
|  |  | 
|  | #include <linux/memblock.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-direct.h> /* to test phys_to_dma/dma_to_phys */ | 
|  | #include <linux/err.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/hashtable.h> | 
|  | #include <linux/libfdt.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_fdt.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/i2c-mux.h> | 
|  | #include <linux/gpio/driver.h> | 
|  |  | 
|  | #include <linux/bitops.h> | 
|  |  | 
|  | #include "of_private.h" | 
|  |  | 
|  | static struct unittest_results { | 
|  | int passed; | 
|  | int failed; | 
|  | } unittest_results; | 
|  |  | 
|  | #define unittest(result, fmt, ...) ({ \ | 
|  | bool failed = !(result); \ | 
|  | if (failed) { \ | 
|  | unittest_results.failed++; \ | 
|  | pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \ | 
|  | } else { \ | 
|  | unittest_results.passed++; \ | 
|  | pr_debug("pass %s():%i\n", __func__, __LINE__); \ | 
|  | } \ | 
|  | failed; \ | 
|  | }) | 
|  |  | 
|  | /* | 
|  | * Expected message may have a message level other than KERN_INFO. | 
|  | * Print the expected message only if the current loglevel will allow | 
|  | * the actual message to print. | 
|  | * | 
|  | * Do not use EXPECT_BEGIN() or EXPECT_END() for messages generated by | 
|  | * pr_debug(). | 
|  | */ | 
|  | #define EXPECT_BEGIN(level, fmt, ...) \ | 
|  | printk(level pr_fmt("EXPECT \\ : ") fmt, ##__VA_ARGS__) | 
|  |  | 
|  | #define EXPECT_END(level, fmt, ...) \ | 
|  | printk(level pr_fmt("EXPECT / : ") fmt, ##__VA_ARGS__) | 
|  |  | 
|  | static void __init of_unittest_find_node_by_name(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | const char *options, *name; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data"); | 
|  | name = kasprintf(GFP_KERNEL, "%pOF", np); | 
|  | unittest(np && !strcmp("/testcase-data", name), | 
|  | "find /testcase-data failed\n"); | 
|  | of_node_put(np); | 
|  | kfree(name); | 
|  |  | 
|  | /* Test if trailing '/' works */ | 
|  | np = of_find_node_by_path("/testcase-data/"); | 
|  | unittest(!np, "trailing '/' on /testcase-data/ should fail\n"); | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | 
|  | name = kasprintf(GFP_KERNEL, "%pOF", np); | 
|  | unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name), | 
|  | "find /testcase-data/phandle-tests/consumer-a failed\n"); | 
|  | of_node_put(np); | 
|  | kfree(name); | 
|  |  | 
|  | np = of_find_node_by_path("testcase-alias"); | 
|  | name = kasprintf(GFP_KERNEL, "%pOF", np); | 
|  | unittest(np && !strcmp("/testcase-data", name), | 
|  | "find testcase-alias failed\n"); | 
|  | of_node_put(np); | 
|  | kfree(name); | 
|  |  | 
|  | /* Test if trailing '/' works on aliases */ | 
|  | np = of_find_node_by_path("testcase-alias/"); | 
|  | unittest(!np, "trailing '/' on testcase-alias/ should fail\n"); | 
|  |  | 
|  | np = of_find_node_by_path("testcase-alias/phandle-tests/consumer-a"); | 
|  | name = kasprintf(GFP_KERNEL, "%pOF", np); | 
|  | unittest(np && !strcmp("/testcase-data/phandle-tests/consumer-a", name), | 
|  | "find testcase-alias/phandle-tests/consumer-a failed\n"); | 
|  | of_node_put(np); | 
|  | kfree(name); | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/missing-path"); | 
|  | unittest(!np, "non-existent path returned node %pOF\n", np); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_by_path("missing-alias"); | 
|  | unittest(!np, "non-existent alias returned node %pOF\n", np); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_by_path("testcase-alias/missing-path"); | 
|  | unittest(!np, "non-existent alias with relative path returned node %pOF\n", np); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("/testcase-data:testoption", &options); | 
|  | unittest(np && !strcmp("testoption", options), | 
|  | "option path test failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("/testcase-data:test/option", &options); | 
|  | unittest(np && !strcmp("test/option", options), | 
|  | "option path test, subcase #1 failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("/testcase-data/testcase-device1:test/option", &options); | 
|  | unittest(np && !strcmp("test/option", options), | 
|  | "option path test, subcase #2 failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("/testcase-data:testoption", NULL); | 
|  | unittest(np, "NULL option path test failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("testcase-alias:testaliasoption", | 
|  | &options); | 
|  | unittest(np && !strcmp("testaliasoption", options), | 
|  | "option alias path test failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("testcase-alias:test/alias/option", | 
|  | &options); | 
|  | unittest(np && !strcmp("test/alias/option", options), | 
|  | "option alias path test, subcase #1 failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_opts_by_path("testcase-alias:testaliasoption", NULL); | 
|  | unittest(np, "NULL option alias path test failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | options = "testoption"; | 
|  | np = of_find_node_opts_by_path("testcase-alias", &options); | 
|  | unittest(np && !options, "option clearing test failed\n"); | 
|  | of_node_put(np); | 
|  |  | 
|  | options = "testoption"; | 
|  | np = of_find_node_opts_by_path("/", &options); | 
|  | unittest(np && !options, "option clearing root node test failed\n"); | 
|  | of_node_put(np); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_dynamic(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct property *prop; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Array of 4 properties for the purpose of testing */ | 
|  | prop = kcalloc(4, sizeof(*prop), GFP_KERNEL); | 
|  | if (!prop) { | 
|  | unittest(0, "kzalloc() failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Add a new property - should pass*/ | 
|  | prop->name = "new-property"; | 
|  | prop->value = "new-property-data"; | 
|  | prop->length = strlen(prop->value) + 1; | 
|  | unittest(of_add_property(np, prop) == 0, "Adding a new property failed\n"); | 
|  |  | 
|  | /* Try to add an existing property - should fail */ | 
|  | prop++; | 
|  | prop->name = "new-property"; | 
|  | prop->value = "new-property-data-should-fail"; | 
|  | prop->length = strlen(prop->value) + 1; | 
|  | unittest(of_add_property(np, prop) != 0, | 
|  | "Adding an existing property should have failed\n"); | 
|  |  | 
|  | /* Try to modify an existing property - should pass */ | 
|  | prop->value = "modify-property-data-should-pass"; | 
|  | prop->length = strlen(prop->value) + 1; | 
|  | unittest(of_update_property(np, prop) == 0, | 
|  | "Updating an existing property should have passed\n"); | 
|  |  | 
|  | /* Try to modify non-existent property - should pass*/ | 
|  | prop++; | 
|  | prop->name = "modify-property"; | 
|  | prop->value = "modify-missing-property-data-should-pass"; | 
|  | prop->length = strlen(prop->value) + 1; | 
|  | unittest(of_update_property(np, prop) == 0, | 
|  | "Updating a missing property should have passed\n"); | 
|  |  | 
|  | /* Remove property - should pass */ | 
|  | unittest(of_remove_property(np, prop) == 0, | 
|  | "Removing a property should have passed\n"); | 
|  |  | 
|  | /* Adding very large property - should pass */ | 
|  | prop++; | 
|  | prop->name = "large-property-PAGE_SIZEx8"; | 
|  | prop->length = PAGE_SIZE * 8; | 
|  | prop->value = kzalloc(prop->length, GFP_KERNEL); | 
|  | unittest(prop->value != NULL, "Unable to allocate large buffer\n"); | 
|  | if (prop->value) | 
|  | unittest(of_add_property(np, prop) == 0, | 
|  | "Adding a large property should have passed\n"); | 
|  | } | 
|  |  | 
|  | static int __init of_unittest_check_node_linkage(struct device_node *np) | 
|  | { | 
|  | struct device_node *child; | 
|  | int count = 0, rc; | 
|  |  | 
|  | for_each_child_of_node(np, child) { | 
|  | if (child->parent != np) { | 
|  | pr_err("Child node %pOFn links to wrong parent %pOFn\n", | 
|  | child, np); | 
|  | rc = -EINVAL; | 
|  | goto put_child; | 
|  | } | 
|  |  | 
|  | rc = of_unittest_check_node_linkage(child); | 
|  | if (rc < 0) | 
|  | goto put_child; | 
|  | count += rc; | 
|  | } | 
|  |  | 
|  | return count + 1; | 
|  | put_child: | 
|  | of_node_put(child); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_check_tree_linkage(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | int allnode_count = 0, child_count; | 
|  |  | 
|  | if (!of_root) | 
|  | return; | 
|  |  | 
|  | for_each_of_allnodes(np) | 
|  | allnode_count++; | 
|  | child_count = of_unittest_check_node_linkage(of_root); | 
|  |  | 
|  | unittest(child_count > 0, "Device node data structure is corrupted\n"); | 
|  | unittest(child_count == allnode_count, | 
|  | "allnodes list size (%i) doesn't match sibling lists size (%i)\n", | 
|  | allnode_count, child_count); | 
|  | pr_debug("allnodes list size (%i); sibling lists size (%i)\n", allnode_count, child_count); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_printf_one(struct device_node *np, const char *fmt, | 
|  | const char *expected) | 
|  | { | 
|  | unsigned char *buf; | 
|  | int buf_size; | 
|  | int size, i; | 
|  |  | 
|  | buf_size = strlen(expected) + 10; | 
|  | buf = kmalloc(buf_size, GFP_KERNEL); | 
|  | if (!buf) | 
|  | return; | 
|  |  | 
|  | /* Baseline; check conversion with a large size limit */ | 
|  | memset(buf, 0xff, buf_size); | 
|  | size = snprintf(buf, buf_size - 2, fmt, np); | 
|  |  | 
|  | /* use strcmp() instead of strncmp() here to be absolutely sure strings match */ | 
|  | unittest((strcmp(buf, expected) == 0) && (buf[size+1] == 0xff), | 
|  | "sprintf failed; fmt='%s' expected='%s' rslt='%s'\n", | 
|  | fmt, expected, buf); | 
|  |  | 
|  | /* Make sure length limits work */ | 
|  | size++; | 
|  | for (i = 0; i < 2; i++, size--) { | 
|  | /* Clear the buffer, and make sure it works correctly still */ | 
|  | memset(buf, 0xff, buf_size); | 
|  | snprintf(buf, size+1, fmt, np); | 
|  | unittest(strncmp(buf, expected, size) == 0 && (buf[size+1] == 0xff), | 
|  | "snprintf failed; size=%i fmt='%s' expected='%s' rslt='%s'\n", | 
|  | size, fmt, expected, buf); | 
|  | } | 
|  | kfree(buf); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_printf(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | const char *full_name = "/testcase-data/platform-tests/test-device@1/dev@100"; | 
|  | char phandle_str[16] = ""; | 
|  |  | 
|  | np = of_find_node_by_path(full_name); | 
|  | if (!np) { | 
|  | unittest(np, "testcase data missing\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | num_to_str(phandle_str, sizeof(phandle_str), np->phandle, 0); | 
|  |  | 
|  | of_unittest_printf_one(np, "%pOF",  full_name); | 
|  | of_unittest_printf_one(np, "%pOFf", full_name); | 
|  | of_unittest_printf_one(np, "%pOFn", "dev"); | 
|  | of_unittest_printf_one(np, "%2pOFn", "dev"); | 
|  | of_unittest_printf_one(np, "%5pOFn", "  dev"); | 
|  | of_unittest_printf_one(np, "%pOFnc", "dev:test-sub-device"); | 
|  | of_unittest_printf_one(np, "%pOFp", phandle_str); | 
|  | of_unittest_printf_one(np, "%pOFP", "dev@100"); | 
|  | of_unittest_printf_one(np, "ABC %pOFP ABC", "ABC dev@100 ABC"); | 
|  | of_unittest_printf_one(np, "%10pOFP", "   dev@100"); | 
|  | of_unittest_printf_one(np, "%-10pOFP", "dev@100   "); | 
|  | of_unittest_printf_one(of_root, "%pOFP", "/"); | 
|  | of_unittest_printf_one(np, "%pOFF", "----"); | 
|  | of_unittest_printf_one(np, "%pOFPF", "dev@100:----"); | 
|  | of_unittest_printf_one(np, "%pOFPFPc", "dev@100:----:dev@100:test-sub-device"); | 
|  | of_unittest_printf_one(np, "%pOFc", "test-sub-device"); | 
|  | of_unittest_printf_one(np, "%pOFC", | 
|  | "\"test-sub-device\",\"test-compat2\",\"test-compat3\""); | 
|  | } | 
|  |  | 
|  | struct node_hash { | 
|  | struct hlist_node node; | 
|  | struct device_node *np; | 
|  | }; | 
|  |  | 
|  | static DEFINE_HASHTABLE(phandle_ht, 8); | 
|  | static void __init of_unittest_check_phandles(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct node_hash *nh; | 
|  | struct hlist_node *tmp; | 
|  | int i, dup_count = 0, phandle_count = 0; | 
|  |  | 
|  | for_each_of_allnodes(np) { | 
|  | if (!np->phandle) | 
|  | continue; | 
|  |  | 
|  | hash_for_each_possible(phandle_ht, nh, node, np->phandle) { | 
|  | if (nh->np->phandle == np->phandle) { | 
|  | pr_info("Duplicate phandle! %i used by %pOF and %pOF\n", | 
|  | np->phandle, nh->np, np); | 
|  | dup_count++; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | nh = kzalloc(sizeof(*nh), GFP_KERNEL); | 
|  | if (!nh) | 
|  | return; | 
|  |  | 
|  | nh->np = np; | 
|  | hash_add(phandle_ht, &nh->node, np->phandle); | 
|  | phandle_count++; | 
|  | } | 
|  | unittest(dup_count == 0, "Found %i duplicates in %i phandles\n", | 
|  | dup_count, phandle_count); | 
|  |  | 
|  | /* Clean up */ | 
|  | hash_for_each_safe(phandle_ht, i, tmp, nh, node) { | 
|  | hash_del(&nh->node); | 
|  | kfree(nh); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_parse_phandle_with_args(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct of_phandle_args args; | 
|  | int i, rc; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); | 
|  | unittest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc); | 
|  |  | 
|  | for (i = 0; i < 8; i++) { | 
|  | bool passed = true; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_parse_phandle_with_args(np, "phandle-list", | 
|  | "#phandle-cells", i, &args); | 
|  |  | 
|  | /* Test the values from tests-phandle.dtsi */ | 
|  | switch (i) { | 
|  | case 0: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  | break; | 
|  | case 1: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  | passed &= (args.args[1] == 0); | 
|  | break; | 
|  | case 2: | 
|  | passed &= (rc == -ENOENT); | 
|  | break; | 
|  | case 3: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 3); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  | passed &= (args.args[1] == 4); | 
|  | passed &= (args.args[2] == 3); | 
|  | break; | 
|  | case 4: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  | passed &= (args.args[1] == 100); | 
|  | break; | 
|  | case 5: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 0); | 
|  | break; | 
|  | case 6: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  | break; | 
|  | case 7: | 
|  | passed &= (rc == -ENOENT); | 
|  | break; | 
|  | default: | 
|  | passed = false; | 
|  | } | 
|  |  | 
|  | unittest(passed, "index %i - data error on node %pOF rc=%i\n", | 
|  | i, args.np, rc); | 
|  | } | 
|  |  | 
|  | /* Check for missing list property */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_parse_phandle_with_args(np, "phandle-list-missing", | 
|  | "#phandle-cells", 0, &args); | 
|  | unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | 
|  | rc = of_count_phandle_with_args(np, "phandle-list-missing", | 
|  | "#phandle-cells"); | 
|  | unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | 
|  |  | 
|  | /* Check for missing cells property */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args(np, "phandle-list", | 
|  | "#phandle-cells-missing", 0, &args); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | rc = of_count_phandle_with_args(np, "phandle-list", | 
|  | "#phandle-cells-missing"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | /* Check for bad phandle in list */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args(np, "phandle-list-bad-phandle", | 
|  | "#phandle-cells", 0, &args); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | 
|  |  | 
|  | rc = of_count_phandle_with_args(np, "phandle-list-bad-phandle", | 
|  | "#phandle-cells"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: could not find phandle"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | /* Check for incorrectly formed argument list */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args(np, "phandle-list-bad-args", | 
|  | "#phandle-cells", 1, &args); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); | 
|  |  | 
|  | rc = of_count_phandle_with_args(np, "phandle-list-bad-args", | 
|  | "#phandle-cells"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_parse_phandle_with_args_map(void) | 
|  | { | 
|  | struct device_node *np, *p0, *p1, *p2, *p3; | 
|  | struct of_phandle_args args; | 
|  | int i, rc; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-b"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | p0 = of_find_node_by_path("/testcase-data/phandle-tests/provider0"); | 
|  | if (!p0) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | p1 = of_find_node_by_path("/testcase-data/phandle-tests/provider1"); | 
|  | if (!p1) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | p2 = of_find_node_by_path("/testcase-data/phandle-tests/provider2"); | 
|  | if (!p2) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | p3 = of_find_node_by_path("/testcase-data/phandle-tests/provider3"); | 
|  | if (!p3) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); | 
|  | unittest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc); | 
|  |  | 
|  | for (i = 0; i < 8; i++) { | 
|  | bool passed = true; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_parse_phandle_with_args_map(np, "phandle-list", | 
|  | "phandle", i, &args); | 
|  |  | 
|  | /* Test the values from tests-phandle.dtsi */ | 
|  | switch (i) { | 
|  | case 0: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p1); | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 1); | 
|  | break; | 
|  | case 1: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p3); | 
|  | passed &= (args.args_count == 3); | 
|  | passed &= (args.args[0] == 2); | 
|  | passed &= (args.args[1] == 5); | 
|  | passed &= (args.args[2] == 3); | 
|  | break; | 
|  | case 2: | 
|  | passed &= (rc == -ENOENT); | 
|  | break; | 
|  | case 3: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p0); | 
|  | passed &= (args.args_count == 0); | 
|  | break; | 
|  | case 4: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p1); | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 3); | 
|  | break; | 
|  | case 5: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p0); | 
|  | passed &= (args.args_count == 0); | 
|  | break; | 
|  | case 6: | 
|  | passed &= !rc; | 
|  | passed &= (args.np == p2); | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == 15); | 
|  | passed &= (args.args[1] == 0x20); | 
|  | break; | 
|  | case 7: | 
|  | passed &= (rc == -ENOENT); | 
|  | break; | 
|  | default: | 
|  | passed = false; | 
|  | } | 
|  |  | 
|  | unittest(passed, "index %i - data error on node %s rc=%i\n", | 
|  | i, args.np->full_name, rc); | 
|  | } | 
|  |  | 
|  | /* Check for missing list property */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_parse_phandle_with_args_map(np, "phandle-list-missing", | 
|  | "phandle", 0, &args); | 
|  | unittest(rc == -ENOENT, "expected:%i got:%i\n", -ENOENT, rc); | 
|  |  | 
|  | /* Check for missing cells,map,mask property */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args_map(np, "phandle-list", | 
|  | "phandle-missing", 0, &args); | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | /* Check for bad phandle in list */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-phandle", | 
|  | "phandle", 0, &args); | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: could not find phandle"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  |  | 
|  | /* Check for incorrectly formed argument list */ | 
|  | memset(&args, 0, sizeof(args)); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1"); | 
|  |  | 
|  | rc = of_parse_phandle_with_args_map(np, "phandle-list-bad-args", | 
|  | "phandle", 1, &args); | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1"); | 
|  |  | 
|  | unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_property_string(void) | 
|  | { | 
|  | const char *strings[4]; | 
|  | struct device_node *np; | 
|  | int rc; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | 
|  | if (!np) { | 
|  | pr_err("No testcase data in device tree\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = of_property_match_string(np, "phandle-list-names", "first"); | 
|  | unittest(rc == 0, "first expected:0 got:%i\n", rc); | 
|  | rc = of_property_match_string(np, "phandle-list-names", "second"); | 
|  | unittest(rc == 1, "second expected:1 got:%i\n", rc); | 
|  | rc = of_property_match_string(np, "phandle-list-names", "third"); | 
|  | unittest(rc == 2, "third expected:2 got:%i\n", rc); | 
|  | rc = of_property_match_string(np, "phandle-list-names", "fourth"); | 
|  | unittest(rc == -ENODATA, "unmatched string; rc=%i\n", rc); | 
|  | rc = of_property_match_string(np, "missing-property", "blah"); | 
|  | unittest(rc == -EINVAL, "missing property; rc=%i\n", rc); | 
|  | rc = of_property_match_string(np, "empty-property", "blah"); | 
|  | unittest(rc == -ENODATA, "empty property; rc=%i\n", rc); | 
|  | rc = of_property_match_string(np, "unterminated-string", "blah"); | 
|  | unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | 
|  |  | 
|  | /* of_property_count_strings() tests */ | 
|  | rc = of_property_count_strings(np, "string-property"); | 
|  | unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); | 
|  | rc = of_property_count_strings(np, "phandle-list-names"); | 
|  | unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); | 
|  | rc = of_property_count_strings(np, "unterminated-string"); | 
|  | unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | 
|  | rc = of_property_count_strings(np, "unterminated-string-list"); | 
|  | unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); | 
|  |  | 
|  | /* of_property_read_string_index() tests */ | 
|  | rc = of_property_read_string_index(np, "string-property", 0, strings); | 
|  | unittest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | strings[0] = NULL; | 
|  | rc = of_property_read_string_index(np, "string-property", 1, strings); | 
|  | unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | rc = of_property_read_string_index(np, "phandle-list-names", 0, strings); | 
|  | unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | rc = of_property_read_string_index(np, "phandle-list-names", 1, strings); | 
|  | unittest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | rc = of_property_read_string_index(np, "phandle-list-names", 2, strings); | 
|  | unittest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | strings[0] = NULL; | 
|  | rc = of_property_read_string_index(np, "phandle-list-names", 3, strings); | 
|  | unittest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | strings[0] = NULL; | 
|  | rc = of_property_read_string_index(np, "unterminated-string", 0, strings); | 
|  | unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings); | 
|  | unittest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | strings[0] = NULL; | 
|  | rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */ | 
|  | unittest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); | 
|  | strings[1] = NULL; | 
|  |  | 
|  | /* of_property_read_string_array() tests */ | 
|  | rc = of_property_read_string_array(np, "string-property", strings, 4); | 
|  | unittest(rc == 1, "Incorrect string count; rc=%i\n", rc); | 
|  | rc = of_property_read_string_array(np, "phandle-list-names", strings, 4); | 
|  | unittest(rc == 3, "Incorrect string count; rc=%i\n", rc); | 
|  | rc = of_property_read_string_array(np, "unterminated-string", strings, 4); | 
|  | unittest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); | 
|  | /* -- An incorrectly formed string should cause a failure */ | 
|  | rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4); | 
|  | unittest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); | 
|  | /* -- parsing the correctly formed strings should still work: */ | 
|  | strings[2] = NULL; | 
|  | rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2); | 
|  | unittest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc); | 
|  | strings[1] = NULL; | 
|  | rc = of_property_read_string_array(np, "phandle-list-names", strings, 1); | 
|  | unittest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]); | 
|  | } | 
|  |  | 
|  | #define propcmp(p1, p2) (((p1)->length == (p2)->length) && \ | 
|  | (p1)->value && (p2)->value && \ | 
|  | !memcmp((p1)->value, (p2)->value, (p1)->length) && \ | 
|  | !strcmp((p1)->name, (p2)->name)) | 
|  | static void __init of_unittest_property_copy(void) | 
|  | { | 
|  | #ifdef CONFIG_OF_DYNAMIC | 
|  | struct property p1 = { .name = "p1", .length = 0, .value = "" }; | 
|  | struct property p2 = { .name = "p2", .length = 5, .value = "abcd" }; | 
|  | struct property *new; | 
|  |  | 
|  | new = __of_prop_dup(&p1, GFP_KERNEL); | 
|  | unittest(new && propcmp(&p1, new), "empty property didn't copy correctly\n"); | 
|  | kfree(new->value); | 
|  | kfree(new->name); | 
|  | kfree(new); | 
|  |  | 
|  | new = __of_prop_dup(&p2, GFP_KERNEL); | 
|  | unittest(new && propcmp(&p2, new), "non-empty property didn't copy correctly\n"); | 
|  | kfree(new->value); | 
|  | kfree(new->name); | 
|  | kfree(new); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_changeset(void) | 
|  | { | 
|  | #ifdef CONFIG_OF_DYNAMIC | 
|  | struct property *ppadd, padd = { .name = "prop-add", .length = 1, .value = "" }; | 
|  | struct property *ppname_n1,  pname_n1  = { .name = "name", .length = 3, .value = "n1"  }; | 
|  | struct property *ppname_n2,  pname_n2  = { .name = "name", .length = 3, .value = "n2"  }; | 
|  | struct property *ppname_n21, pname_n21 = { .name = "name", .length = 3, .value = "n21" }; | 
|  | struct property *ppupdate, pupdate = { .name = "prop-update", .length = 5, .value = "abcd" }; | 
|  | struct property *ppremove; | 
|  | struct device_node *n1, *n2, *n21, *nchangeset, *nremove, *parent, *np; | 
|  | struct of_changeset chgset; | 
|  |  | 
|  | n1 = __of_node_dup(NULL, "n1"); | 
|  | unittest(n1, "testcase setup failure\n"); | 
|  |  | 
|  | n2 = __of_node_dup(NULL, "n2"); | 
|  | unittest(n2, "testcase setup failure\n"); | 
|  |  | 
|  | n21 = __of_node_dup(NULL, "n21"); | 
|  | unittest(n21, "testcase setup failure %p\n", n21); | 
|  |  | 
|  | nchangeset = of_find_node_by_path("/testcase-data/changeset"); | 
|  | nremove = of_get_child_by_name(nchangeset, "node-remove"); | 
|  | unittest(nremove, "testcase setup failure\n"); | 
|  |  | 
|  | ppadd = __of_prop_dup(&padd, GFP_KERNEL); | 
|  | unittest(ppadd, "testcase setup failure\n"); | 
|  |  | 
|  | ppname_n1  = __of_prop_dup(&pname_n1, GFP_KERNEL); | 
|  | unittest(ppname_n1, "testcase setup failure\n"); | 
|  |  | 
|  | ppname_n2  = __of_prop_dup(&pname_n2, GFP_KERNEL); | 
|  | unittest(ppname_n2, "testcase setup failure\n"); | 
|  |  | 
|  | ppname_n21 = __of_prop_dup(&pname_n21, GFP_KERNEL); | 
|  | unittest(ppname_n21, "testcase setup failure\n"); | 
|  |  | 
|  | ppupdate = __of_prop_dup(&pupdate, GFP_KERNEL); | 
|  | unittest(ppupdate, "testcase setup failure\n"); | 
|  |  | 
|  | parent = nchangeset; | 
|  | n1->parent = parent; | 
|  | n2->parent = parent; | 
|  | n21->parent = n2; | 
|  |  | 
|  | ppremove = of_find_property(parent, "prop-remove", NULL); | 
|  | unittest(ppremove, "failed to find removal prop"); | 
|  |  | 
|  | of_changeset_init(&chgset); | 
|  |  | 
|  | unittest(!of_changeset_attach_node(&chgset, n1), "fail attach n1\n"); | 
|  | unittest(!of_changeset_add_property(&chgset, n1, ppname_n1), "fail add prop name\n"); | 
|  |  | 
|  | unittest(!of_changeset_attach_node(&chgset, n2), "fail attach n2\n"); | 
|  | unittest(!of_changeset_add_property(&chgset, n2, ppname_n2), "fail add prop name\n"); | 
|  |  | 
|  | unittest(!of_changeset_detach_node(&chgset, nremove), "fail remove node\n"); | 
|  | unittest(!of_changeset_add_property(&chgset, n21, ppname_n21), "fail add prop name\n"); | 
|  |  | 
|  | unittest(!of_changeset_attach_node(&chgset, n21), "fail attach n21\n"); | 
|  |  | 
|  | unittest(!of_changeset_add_property(&chgset, parent, ppadd), "fail add prop prop-add\n"); | 
|  | unittest(!of_changeset_update_property(&chgset, parent, ppupdate), "fail update prop\n"); | 
|  | unittest(!of_changeset_remove_property(&chgset, parent, ppremove), "fail remove prop\n"); | 
|  |  | 
|  | unittest(!of_changeset_apply(&chgset), "apply failed\n"); | 
|  |  | 
|  | of_node_put(nchangeset); | 
|  |  | 
|  | /* Make sure node names are constructed correctly */ | 
|  | unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")), | 
|  | "'%pOF' not added\n", n21); | 
|  | of_node_put(np); | 
|  |  | 
|  | unittest(!of_changeset_revert(&chgset), "revert failed\n"); | 
|  |  | 
|  | of_changeset_destroy(&chgset); | 
|  |  | 
|  | of_node_put(n1); | 
|  | of_node_put(n2); | 
|  | of_node_put(n21); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_dma_get_max_cpu_address(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | phys_addr_t cpu_addr; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_OF_ADDRESS)) | 
|  | return; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/address-tests"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cpu_addr = of_dma_get_max_cpu_address(np); | 
|  | unittest(cpu_addr == 0x4fffffff, | 
|  | "of_dma_get_max_cpu_address: wrong CPU addr %pad (expecting %x)\n", | 
|  | &cpu_addr, 0x4fffffff); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_dma_ranges_one(const char *path, | 
|  | u64 expect_dma_addr, u64 expect_paddr) | 
|  | { | 
|  | #ifdef CONFIG_HAS_DMA | 
|  | struct device_node *np; | 
|  | const struct bus_dma_region *map = NULL; | 
|  | int rc; | 
|  |  | 
|  | np = of_find_node_by_path(path); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = of_dma_get_range(np, &map); | 
|  |  | 
|  | unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc); | 
|  |  | 
|  | if (!rc) { | 
|  | phys_addr_t	paddr; | 
|  | dma_addr_t	dma_addr; | 
|  | struct device	dev_bogus; | 
|  |  | 
|  | dev_bogus.dma_range_map = map; | 
|  | paddr = dma_to_phys(&dev_bogus, expect_dma_addr); | 
|  | dma_addr = phys_to_dma(&dev_bogus, expect_paddr); | 
|  |  | 
|  | unittest(paddr == expect_paddr, | 
|  | "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", | 
|  | &paddr, expect_paddr, np); | 
|  | unittest(dma_addr == expect_dma_addr, | 
|  | "of_dma_get_range: wrong DMA addr %pad (expecting %llx) on node %pOF\n", | 
|  | &dma_addr, expect_dma_addr, np); | 
|  |  | 
|  | kfree(map); | 
|  | } | 
|  | of_node_put(np); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_parse_dma_ranges(void) | 
|  | { | 
|  | of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", | 
|  | 0x0, 0x20000000); | 
|  | of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", | 
|  | 0x100000000, 0x20000000); | 
|  | of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", | 
|  | 0x80000000, 0x20000000); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_pci_dma_ranges(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct of_pci_range range; | 
|  | struct of_pci_range_parser parser; | 
|  | int i = 0; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_PCI)) | 
|  | return; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/address-tests/pci@90000000"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (of_pci_dma_range_parser_init(&parser, np)) { | 
|  | pr_err("missing dma-ranges property\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get the dma-ranges from the device tree | 
|  | */ | 
|  | for_each_of_pci_range(&parser, &range) { | 
|  | if (!i) { | 
|  | unittest(range.size == 0x10000000, | 
|  | "for_each_of_pci_range wrong size on node %pOF size=%llx\n", | 
|  | np, range.size); | 
|  | unittest(range.cpu_addr == 0x20000000, | 
|  | "for_each_of_pci_range wrong CPU addr (%llx) on node %pOF", | 
|  | range.cpu_addr, np); | 
|  | unittest(range.pci_addr == 0x80000000, | 
|  | "for_each_of_pci_range wrong DMA addr (%llx) on node %pOF", | 
|  | range.pci_addr, np); | 
|  | } else { | 
|  | unittest(range.size == 0x10000000, | 
|  | "for_each_of_pci_range wrong size on node %pOF size=%llx\n", | 
|  | np, range.size); | 
|  | unittest(range.cpu_addr == 0x40000000, | 
|  | "for_each_of_pci_range wrong CPU addr (%llx) on node %pOF", | 
|  | range.cpu_addr, np); | 
|  | unittest(range.pci_addr == 0xc0000000, | 
|  | "for_each_of_pci_range wrong DMA addr (%llx) on node %pOF", | 
|  | range.pci_addr, np); | 
|  | } | 
|  | i++; | 
|  | } | 
|  |  | 
|  | of_node_put(np); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_parse_interrupts(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct of_phandle_args args; | 
|  | int i, rc; | 
|  |  | 
|  | if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) | 
|  | return; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/interrupts/interrupts0"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 4; i++) { | 
|  | bool passed = true; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_irq_parse_one(np, i, &args); | 
|  |  | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == (i + 1)); | 
|  |  | 
|  | unittest(passed, "index %i - data error on node %pOF rc=%i\n", | 
|  | i, args.np, rc); | 
|  | } | 
|  | of_node_put(np); | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/interrupts/interrupts1"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 4; i++) { | 
|  | bool passed = true; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_irq_parse_one(np, i, &args); | 
|  |  | 
|  | /* Test the values from tests-phandle.dtsi */ | 
|  | switch (i) { | 
|  | case 0: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 9); | 
|  | break; | 
|  | case 1: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 3); | 
|  | passed &= (args.args[0] == 10); | 
|  | passed &= (args.args[1] == 11); | 
|  | passed &= (args.args[2] == 12); | 
|  | break; | 
|  | case 2: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == 13); | 
|  | passed &= (args.args[1] == 14); | 
|  | break; | 
|  | case 3: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == 15); | 
|  | passed &= (args.args[1] == 16); | 
|  | break; | 
|  | default: | 
|  | passed = false; | 
|  | } | 
|  | unittest(passed, "index %i - data error on node %pOF rc=%i\n", | 
|  | i, args.np, rc); | 
|  | } | 
|  | of_node_put(np); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_parse_interrupts_extended(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct of_phandle_args args; | 
|  | int i, rc; | 
|  |  | 
|  | if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) | 
|  | return; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/interrupts/interrupts-extended0"); | 
|  | if (!np) { | 
|  | pr_err("missing testcase data\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 7; i++) { | 
|  | bool passed = true; | 
|  |  | 
|  | memset(&args, 0, sizeof(args)); | 
|  | rc = of_irq_parse_one(np, i, &args); | 
|  |  | 
|  | /* Test the values from tests-phandle.dtsi */ | 
|  | switch (i) { | 
|  | case 0: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 1); | 
|  | break; | 
|  | case 1: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 3); | 
|  | passed &= (args.args[0] == 2); | 
|  | passed &= (args.args[1] == 3); | 
|  | passed &= (args.args[2] == 4); | 
|  | break; | 
|  | case 2: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == 5); | 
|  | passed &= (args.args[1] == 6); | 
|  | break; | 
|  | case 3: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 9); | 
|  | break; | 
|  | case 4: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 3); | 
|  | passed &= (args.args[0] == 10); | 
|  | passed &= (args.args[1] == 11); | 
|  | passed &= (args.args[2] == 12); | 
|  | break; | 
|  | case 5: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 2); | 
|  | passed &= (args.args[0] == 13); | 
|  | passed &= (args.args[1] == 14); | 
|  | break; | 
|  | case 6: | 
|  | passed &= !rc; | 
|  | passed &= (args.args_count == 1); | 
|  | passed &= (args.args[0] == 15); | 
|  | break; | 
|  | default: | 
|  | passed = false; | 
|  | } | 
|  |  | 
|  | unittest(passed, "index %i - data error on node %pOF rc=%i\n", | 
|  | i, args.np, rc); | 
|  | } | 
|  | of_node_put(np); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id match_node_table[] = { | 
|  | { .data = "A", .name = "name0", }, /* Name alone is lowest priority */ | 
|  | { .data = "B", .type = "type1", }, /* followed by type alone */ | 
|  |  | 
|  | { .data = "Ca", .name = "name2", .type = "type1", }, /* followed by both together */ | 
|  | { .data = "Cb", .name = "name2", }, /* Only match when type doesn't match */ | 
|  | { .data = "Cc", .name = "name2", .type = "type2", }, | 
|  |  | 
|  | { .data = "E", .compatible = "compat3" }, | 
|  | { .data = "G", .compatible = "compat2", }, | 
|  | { .data = "H", .compatible = "compat2", .name = "name5", }, | 
|  | { .data = "I", .compatible = "compat2", .type = "type1", }, | 
|  | { .data = "J", .compatible = "compat2", .type = "type1", .name = "name8", }, | 
|  | { .data = "K", .compatible = "compat2", .name = "name9", }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static struct { | 
|  | const char *path; | 
|  | const char *data; | 
|  | } match_node_tests[] = { | 
|  | { .path = "/testcase-data/match-node/name0", .data = "A", }, | 
|  | { .path = "/testcase-data/match-node/name1", .data = "B", }, | 
|  | { .path = "/testcase-data/match-node/a/name2", .data = "Ca", }, | 
|  | { .path = "/testcase-data/match-node/b/name2", .data = "Cb", }, | 
|  | { .path = "/testcase-data/match-node/c/name2", .data = "Cc", }, | 
|  | { .path = "/testcase-data/match-node/name3", .data = "E", }, | 
|  | { .path = "/testcase-data/match-node/name4", .data = "G", }, | 
|  | { .path = "/testcase-data/match-node/name5", .data = "H", }, | 
|  | { .path = "/testcase-data/match-node/name6", .data = "G", }, | 
|  | { .path = "/testcase-data/match-node/name7", .data = "I", }, | 
|  | { .path = "/testcase-data/match-node/name8", .data = "J", }, | 
|  | { .path = "/testcase-data/match-node/name9", .data = "K", }, | 
|  | }; | 
|  |  | 
|  | static void __init of_unittest_match_node(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | const struct of_device_id *match; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(match_node_tests); i++) { | 
|  | np = of_find_node_by_path(match_node_tests[i].path); | 
|  | if (!np) { | 
|  | unittest(0, "missing testcase node %s\n", | 
|  | match_node_tests[i].path); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | match = of_match_node(match_node_table, np); | 
|  | if (!match) { | 
|  | unittest(0, "%s didn't match anything\n", | 
|  | match_node_tests[i].path); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (strcmp(match->data, match_node_tests[i].data) != 0) { | 
|  | unittest(0, "%s got wrong match. expected %s, got %s\n", | 
|  | match_node_tests[i].path, match_node_tests[i].data, | 
|  | (const char *)match->data); | 
|  | continue; | 
|  | } | 
|  | unittest(1, "passed"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct resource test_bus_res = { | 
|  | .start = 0xfffffff8, | 
|  | .end = 0xfffffff9, | 
|  | .flags = IORESOURCE_MEM, | 
|  | }; | 
|  | static const struct platform_device_info test_bus_info = { | 
|  | .name = "unittest-bus", | 
|  | }; | 
|  | static void __init of_unittest_platform_populate(void) | 
|  | { | 
|  | int irq, rc; | 
|  | struct device_node *np, *child, *grandchild; | 
|  | struct platform_device *pdev, *test_bus; | 
|  | const struct of_device_id match[] = { | 
|  | { .compatible = "test-device", }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data"); | 
|  | of_platform_default_populate(np, NULL, NULL); | 
|  |  | 
|  | /* Test that a missing irq domain returns -EPROBE_DEFER */ | 
|  | np = of_find_node_by_path("/testcase-data/testcase-device1"); | 
|  | pdev = of_find_device_by_node(np); | 
|  | unittest(pdev, "device 1 creation failed\n"); | 
|  |  | 
|  | if (!(of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)) { | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | unittest(irq == -EPROBE_DEFER, | 
|  | "device deferred probe failed - %d\n", irq); | 
|  |  | 
|  | /* Test that a parsing failure does not return -EPROBE_DEFER */ | 
|  | np = of_find_node_by_path("/testcase-data/testcase-device2"); | 
|  | pdev = of_find_device_by_node(np); | 
|  | unittest(pdev, "device 2 creation failed\n"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "platform testcase-data:testcase-device2: IRQ index 0 not found"); | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "platform testcase-data:testcase-device2: IRQ index 0 not found"); | 
|  |  | 
|  | unittest(irq < 0 && irq != -EPROBE_DEFER, | 
|  | "device parsing error failed - %d\n", irq); | 
|  | } | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/platform-tests"); | 
|  | unittest(np, "No testcase data in device tree\n"); | 
|  | if (!np) | 
|  | return; | 
|  |  | 
|  | test_bus = platform_device_register_full(&test_bus_info); | 
|  | rc = PTR_ERR_OR_ZERO(test_bus); | 
|  | unittest(!rc, "testbus registration failed; rc=%i\n", rc); | 
|  | if (rc) { | 
|  | of_node_put(np); | 
|  | return; | 
|  | } | 
|  | test_bus->dev.of_node = np; | 
|  |  | 
|  | /* | 
|  | * Add a dummy resource to the test bus node after it is | 
|  | * registered to catch problems with un-inserted resources. The | 
|  | * DT code doesn't insert the resources, and it has caused the | 
|  | * kernel to oops in the past. This makes sure the same bug | 
|  | * doesn't crop up again. | 
|  | */ | 
|  | platform_device_add_resources(test_bus, &test_bus_res, 1); | 
|  |  | 
|  | of_platform_populate(np, match, NULL, &test_bus->dev); | 
|  | for_each_child_of_node(np, child) { | 
|  | for_each_child_of_node(child, grandchild) { | 
|  | pdev = of_find_device_by_node(grandchild); | 
|  | unittest(pdev, | 
|  | "Could not create device for node '%pOFn'\n", | 
|  | grandchild); | 
|  | of_dev_put(pdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | of_platform_depopulate(&test_bus->dev); | 
|  | for_each_child_of_node(np, child) { | 
|  | for_each_child_of_node(child, grandchild) | 
|  | unittest(!of_find_device_by_node(grandchild), | 
|  | "device didn't get destroyed '%pOFn'\n", | 
|  | grandchild); | 
|  | } | 
|  |  | 
|  | platform_device_unregister(test_bus); | 
|  | of_node_put(np); | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	update_node_properties - adds the properties | 
|  | *	of np into dup node (present in live tree) and | 
|  | *	updates parent of children of np to dup. | 
|  | * | 
|  | *	@np:	node whose properties are being added to the live tree | 
|  | *	@dup:	node present in live tree to be updated | 
|  | */ | 
|  | static void update_node_properties(struct device_node *np, | 
|  | struct device_node *dup) | 
|  | { | 
|  | struct property *prop; | 
|  | struct property *save_next; | 
|  | struct device_node *child; | 
|  | int ret; | 
|  |  | 
|  | for_each_child_of_node(np, child) | 
|  | child->parent = dup; | 
|  |  | 
|  | /* | 
|  | * "unittest internal error: unable to add testdata property" | 
|  | * | 
|  | *    If this message reports a property in node '/__symbols__' then | 
|  | *    the respective unittest overlay contains a label that has the | 
|  | *    same name as a label in the live devicetree.  The label will | 
|  | *    be in the live devicetree only if the devicetree source was | 
|  | *    compiled with the '-@' option.  If you encounter this error, | 
|  | *    please consider renaming __all__ of the labels in the unittest | 
|  | *    overlay dts files with an odd prefix that is unlikely to be | 
|  | *    used in a real devicetree. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * open code for_each_property_of_node() because of_add_property() | 
|  | * sets prop->next to NULL | 
|  | */ | 
|  | for (prop = np->properties; prop != NULL; prop = save_next) { | 
|  | save_next = prop->next; | 
|  | ret = of_add_property(dup, prop); | 
|  | if (ret) { | 
|  | if (ret == -EEXIST && !strcmp(prop->name, "name")) | 
|  | continue; | 
|  | pr_err("unittest internal error: unable to add testdata property %pOF/%s", | 
|  | np, prop->name); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	attach_node_and_children - attaches nodes | 
|  | *	and its children to live tree. | 
|  | *	CAUTION: misleading function name - if node @np already exists in | 
|  | *	the live tree then children of @np are *not* attached to the live | 
|  | *	tree.  This works for the current test devicetree nodes because such | 
|  | *	nodes do not have child nodes. | 
|  | * | 
|  | *	@np:	Node to attach to live tree | 
|  | */ | 
|  | static void attach_node_and_children(struct device_node *np) | 
|  | { | 
|  | struct device_node *next, *dup, *child; | 
|  | unsigned long flags; | 
|  | const char *full_name; | 
|  |  | 
|  | full_name = kasprintf(GFP_KERNEL, "%pOF", np); | 
|  |  | 
|  | if (!strcmp(full_name, "/__local_fixups__") || | 
|  | !strcmp(full_name, "/__fixups__")) { | 
|  | kfree(full_name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dup = of_find_node_by_path(full_name); | 
|  | kfree(full_name); | 
|  | if (dup) { | 
|  | update_node_properties(np, dup); | 
|  | return; | 
|  | } | 
|  |  | 
|  | child = np->child; | 
|  | np->child = NULL; | 
|  |  | 
|  | mutex_lock(&of_mutex); | 
|  | raw_spin_lock_irqsave(&devtree_lock, flags); | 
|  | np->sibling = np->parent->child; | 
|  | np->parent->child = np; | 
|  | of_node_clear_flag(np, OF_DETACHED); | 
|  | raw_spin_unlock_irqrestore(&devtree_lock, flags); | 
|  |  | 
|  | __of_attach_node_sysfs(np); | 
|  | mutex_unlock(&of_mutex); | 
|  |  | 
|  | while (child) { | 
|  | next = child->sibling; | 
|  | attach_node_and_children(child); | 
|  | child = next; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	unittest_data_add - Reads, copies data from | 
|  | *	linked tree and attaches it to the live tree | 
|  | */ | 
|  | static int __init unittest_data_add(void) | 
|  | { | 
|  | void *unittest_data; | 
|  | struct device_node *unittest_data_node, *np; | 
|  | /* | 
|  | * __dtb_testcases_begin[] and __dtb_testcases_end[] are magically | 
|  | * created by cmd_dt_S_dtb in scripts/Makefile.lib | 
|  | */ | 
|  | extern uint8_t __dtb_testcases_begin[]; | 
|  | extern uint8_t __dtb_testcases_end[]; | 
|  | const int size = __dtb_testcases_end - __dtb_testcases_begin; | 
|  | int rc; | 
|  |  | 
|  | if (!size) { | 
|  | pr_warn("%s: No testcase data to attach; not running tests\n", | 
|  | __func__); | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | /* creating copy */ | 
|  | unittest_data = kmemdup(__dtb_testcases_begin, size, GFP_KERNEL); | 
|  | if (!unittest_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | of_fdt_unflatten_tree(unittest_data, NULL, &unittest_data_node); | 
|  | if (!unittest_data_node) { | 
|  | pr_warn("%s: No tree to attach; not running tests\n", __func__); | 
|  | kfree(unittest_data); | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This lock normally encloses of_resolve_phandles() | 
|  | */ | 
|  | of_overlay_mutex_lock(); | 
|  |  | 
|  | rc = of_resolve_phandles(unittest_data_node); | 
|  | if (rc) { | 
|  | pr_err("%s: Failed to resolve phandles (rc=%i)\n", __func__, rc); | 
|  | of_overlay_mutex_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!of_root) { | 
|  | of_root = unittest_data_node; | 
|  | for_each_of_allnodes(np) | 
|  | __of_attach_node_sysfs(np); | 
|  | of_aliases = of_find_node_by_path("/aliases"); | 
|  | of_chosen = of_find_node_by_path("/chosen"); | 
|  | of_overlay_mutex_unlock(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "Duplicate name in testcase-data, renamed to \"duplicate-name#1\""); | 
|  |  | 
|  | /* attach the sub-tree to live tree */ | 
|  | np = unittest_data_node->child; | 
|  | while (np) { | 
|  | struct device_node *next = np->sibling; | 
|  |  | 
|  | np->parent = of_root; | 
|  | attach_node_and_children(np); | 
|  | np = next; | 
|  | } | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "Duplicate name in testcase-data, renamed to \"duplicate-name#1\""); | 
|  |  | 
|  | of_overlay_mutex_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF_OVERLAY | 
|  | static int __init overlay_data_apply(const char *overlay_name, int *overlay_id); | 
|  |  | 
|  | static int unittest_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  |  | 
|  | if (np == NULL) { | 
|  | dev_err(dev, "No OF data for device\n"); | 
|  | return -EINVAL; | 
|  |  | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  |  | 
|  | of_platform_populate(np, NULL, NULL, &pdev->dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int unittest_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id unittest_match[] = { | 
|  | { .compatible = "unittest", }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver unittest_driver = { | 
|  | .probe			= unittest_probe, | 
|  | .remove			= unittest_remove, | 
|  | .driver = { | 
|  | .name		= "unittest", | 
|  | .of_match_table	= of_match_ptr(unittest_match), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* get the platform device instantiated at the path */ | 
|  | static struct platform_device *of_path_to_platform_device(const char *path) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct platform_device *pdev; | 
|  |  | 
|  | np = of_find_node_by_path(path); | 
|  | if (np == NULL) | 
|  | return NULL; | 
|  |  | 
|  | pdev = of_find_device_by_node(np); | 
|  | of_node_put(np); | 
|  |  | 
|  | return pdev; | 
|  | } | 
|  |  | 
|  | /* find out if a platform device exists at that path */ | 
|  | static int of_path_platform_device_exists(const char *path) | 
|  | { | 
|  | struct platform_device *pdev; | 
|  |  | 
|  | pdev = of_path_to_platform_device(path); | 
|  | platform_device_put(pdev); | 
|  | return pdev != NULL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF_GPIO | 
|  |  | 
|  | struct unittest_gpio_dev { | 
|  | struct gpio_chip chip; | 
|  | }; | 
|  |  | 
|  | static int unittest_gpio_chip_request_count; | 
|  | static int unittest_gpio_probe_count; | 
|  | static int unittest_gpio_probe_pass_count; | 
|  |  | 
|  | static int unittest_gpio_chip_request(struct gpio_chip *chip, unsigned int offset) | 
|  | { | 
|  | unittest_gpio_chip_request_count++; | 
|  |  | 
|  | pr_debug("%s(): %s %d %d\n", __func__, chip->label, offset, | 
|  | unittest_gpio_chip_request_count); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int unittest_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct unittest_gpio_dev *devptr; | 
|  | int ret; | 
|  |  | 
|  | unittest_gpio_probe_count++; | 
|  |  | 
|  | devptr = kzalloc(sizeof(*devptr), GFP_KERNEL); | 
|  | if (!devptr) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(pdev, devptr); | 
|  |  | 
|  | devptr->chip.of_node = pdev->dev.of_node; | 
|  | devptr->chip.label = "of-unittest-gpio"; | 
|  | devptr->chip.base = -1; /* dynamic allocation */ | 
|  | devptr->chip.ngpio = 5; | 
|  | devptr->chip.request = unittest_gpio_chip_request; | 
|  |  | 
|  | ret = gpiochip_add_data(&devptr->chip, NULL); | 
|  |  | 
|  | unittest(!ret, | 
|  | "gpiochip_add_data() for node @%pOF failed, ret = %d\n", devptr->chip.of_node, ret); | 
|  |  | 
|  | if (!ret) | 
|  | unittest_gpio_probe_pass_count++; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int unittest_gpio_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct unittest_gpio_dev *gdev = platform_get_drvdata(pdev); | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = pdev->dev.of_node; | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  |  | 
|  | if (!gdev) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (gdev->chip.base != -1) | 
|  | gpiochip_remove(&gdev->chip); | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  | kfree(gdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id unittest_gpio_id[] = { | 
|  | { .compatible = "unittest-gpio", }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static struct platform_driver unittest_gpio_driver = { | 
|  | .probe	= unittest_gpio_probe, | 
|  | .remove	= unittest_gpio_remove, | 
|  | .driver	= { | 
|  | .name		= "unittest-gpio", | 
|  | .of_match_table	= of_match_ptr(unittest_gpio_id), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void __init of_unittest_overlay_gpio(void) | 
|  | { | 
|  | int chip_request_count; | 
|  | int probe_pass_count; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * tests: apply overlays before registering driver | 
|  | * Similar to installing a driver as a module, the | 
|  | * driver is registered after applying the overlays. | 
|  | * | 
|  | * The overlays are applied by overlay_data_apply() | 
|  | * instead of of_unittest_apply_overlay() so that they | 
|  | * will not be tracked.  Thus they will not be removed | 
|  | * by of_unittest_destroy_tracked_overlays(). | 
|  | * | 
|  | * - apply overlay_gpio_01 | 
|  | * - apply overlay_gpio_02a | 
|  | * - apply overlay_gpio_02b | 
|  | * - register driver | 
|  | * | 
|  | * register driver will result in | 
|  | *   - probe and processing gpio hog for overlay_gpio_01 | 
|  | *   - probe for overlay_gpio_02a | 
|  | *   - processing gpio for overlay_gpio_02b | 
|  | */ | 
|  |  | 
|  | probe_pass_count = unittest_gpio_probe_pass_count; | 
|  | chip_request_count = unittest_gpio_chip_request_count; | 
|  |  | 
|  | /* | 
|  | * overlay_gpio_01 contains gpio node and child gpio hog node | 
|  | * overlay_gpio_02a contains gpio node | 
|  | * overlay_gpio_02b contains child gpio hog node | 
|  | */ | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_01", NULL), | 
|  | "Adding overlay 'overlay_gpio_01' failed\n"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_02a", NULL), | 
|  | "Adding overlay 'overlay_gpio_02a' failed\n"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_02b", NULL), | 
|  | "Adding overlay 'overlay_gpio_02b' failed\n"); | 
|  |  | 
|  | /* | 
|  | * messages are the result of the probes, after the | 
|  | * driver is registered | 
|  | */ | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "GPIO line <<int>> (line-B-input) hogged as input\n"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "GPIO line <<int>> (line-A-input) hogged as input\n"); | 
|  |  | 
|  | ret = platform_driver_register(&unittest_gpio_driver); | 
|  | if (unittest(ret == 0, "could not register unittest gpio driver\n")) | 
|  | return; | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "GPIO line <<int>> (line-A-input) hogged as input\n"); | 
|  | EXPECT_END(KERN_INFO, | 
|  | "GPIO line <<int>> (line-B-input) hogged as input\n"); | 
|  |  | 
|  | unittest(probe_pass_count + 2 == unittest_gpio_probe_pass_count, | 
|  | "unittest_gpio_probe() failed or not called\n"); | 
|  |  | 
|  | unittest(chip_request_count + 2 == unittest_gpio_chip_request_count, | 
|  | "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | 
|  | unittest_gpio_chip_request_count - chip_request_count); | 
|  |  | 
|  | /* | 
|  | * tests: apply overlays after registering driver | 
|  | * | 
|  | * Similar to a driver built-in to the kernel, the | 
|  | * driver is registered before applying the overlays. | 
|  | * | 
|  | * overlay_gpio_03 contains gpio node and child gpio hog node | 
|  | * | 
|  | * - apply overlay_gpio_03 | 
|  | * | 
|  | * apply overlay will result in | 
|  | *   - probe and processing gpio hog. | 
|  | */ | 
|  |  | 
|  | probe_pass_count = unittest_gpio_probe_pass_count; | 
|  | chip_request_count = unittest_gpio_chip_request_count; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "GPIO line <<int>> (line-D-input) hogged as input\n"); | 
|  |  | 
|  | /* overlay_gpio_03 contains gpio node and child gpio hog node */ | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_03", NULL), | 
|  | "Adding overlay 'overlay_gpio_03' failed\n"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "GPIO line <<int>> (line-D-input) hogged as input\n"); | 
|  |  | 
|  | unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count, | 
|  | "unittest_gpio_probe() failed or not called\n"); | 
|  |  | 
|  | unittest(chip_request_count + 1 == unittest_gpio_chip_request_count, | 
|  | "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | 
|  | unittest_gpio_chip_request_count - chip_request_count); | 
|  |  | 
|  | /* | 
|  | * overlay_gpio_04a contains gpio node | 
|  | * | 
|  | * - apply overlay_gpio_04a | 
|  | * | 
|  | * apply the overlay will result in | 
|  | *   - probe for overlay_gpio_04a | 
|  | */ | 
|  |  | 
|  | probe_pass_count = unittest_gpio_probe_pass_count; | 
|  | chip_request_count = unittest_gpio_chip_request_count; | 
|  |  | 
|  | /* overlay_gpio_04a contains gpio node */ | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_04a", NULL), | 
|  | "Adding overlay 'overlay_gpio_04a' failed\n"); | 
|  |  | 
|  | unittest(probe_pass_count + 1 == unittest_gpio_probe_pass_count, | 
|  | "unittest_gpio_probe() failed or not called\n"); | 
|  |  | 
|  | /* | 
|  | * overlay_gpio_04b contains child gpio hog node | 
|  | * | 
|  | * - apply overlay_gpio_04b | 
|  | * | 
|  | * apply the overlay will result in | 
|  | *   - processing gpio for overlay_gpio_04b | 
|  | */ | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "GPIO line <<int>> (line-C-input) hogged as input\n"); | 
|  |  | 
|  | /* overlay_gpio_04b contains child gpio hog node */ | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_gpio_04b", NULL), | 
|  | "Adding overlay 'overlay_gpio_04b' failed\n"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "GPIO line <<int>> (line-C-input) hogged as input\n"); | 
|  |  | 
|  | unittest(chip_request_count + 1 == unittest_gpio_chip_request_count, | 
|  | "unittest_gpio_chip_request() called %d times (expected 1 time)\n", | 
|  | unittest_gpio_chip_request_count - chip_request_count); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static void __init of_unittest_overlay_gpio(void) | 
|  | { | 
|  | /* skip tests */ | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | #if IS_BUILTIN(CONFIG_I2C) | 
|  |  | 
|  | /* get the i2c client device instantiated at the path */ | 
|  | static struct i2c_client *of_path_to_i2c_client(const char *path) | 
|  | { | 
|  | struct device_node *np; | 
|  | struct i2c_client *client; | 
|  |  | 
|  | np = of_find_node_by_path(path); | 
|  | if (np == NULL) | 
|  | return NULL; | 
|  |  | 
|  | client = of_find_i2c_device_by_node(np); | 
|  | of_node_put(np); | 
|  |  | 
|  | return client; | 
|  | } | 
|  |  | 
|  | /* find out if a i2c client device exists at that path */ | 
|  | static int of_path_i2c_client_exists(const char *path) | 
|  | { | 
|  | struct i2c_client *client; | 
|  |  | 
|  | client = of_path_to_i2c_client(path); | 
|  | if (client) | 
|  | put_device(&client->dev); | 
|  | return client != NULL; | 
|  | } | 
|  | #else | 
|  | static int of_path_i2c_client_exists(const char *path) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | enum overlay_type { | 
|  | PDEV_OVERLAY, | 
|  | I2C_OVERLAY | 
|  | }; | 
|  |  | 
|  | static int of_path_device_type_exists(const char *path, | 
|  | enum overlay_type ovtype) | 
|  | { | 
|  | switch (ovtype) { | 
|  | case PDEV_OVERLAY: | 
|  | return of_path_platform_device_exists(path); | 
|  | case I2C_OVERLAY: | 
|  | return of_path_i2c_client_exists(path); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *unittest_path(int nr, enum overlay_type ovtype) | 
|  | { | 
|  | const char *base; | 
|  | static char buf[256]; | 
|  |  | 
|  | switch (ovtype) { | 
|  | case PDEV_OVERLAY: | 
|  | base = "/testcase-data/overlay-node/test-bus"; | 
|  | break; | 
|  | case I2C_OVERLAY: | 
|  | base = "/testcase-data/overlay-node/test-bus/i2c-test-bus"; | 
|  | break; | 
|  | default: | 
|  | buf[0] = '\0'; | 
|  | return buf; | 
|  | } | 
|  | snprintf(buf, sizeof(buf) - 1, "%s/test-unittest%d", base, nr); | 
|  | buf[sizeof(buf) - 1] = '\0'; | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | static int of_unittest_device_exists(int unittest_nr, enum overlay_type ovtype) | 
|  | { | 
|  | const char *path; | 
|  |  | 
|  | path = unittest_path(unittest_nr, ovtype); | 
|  |  | 
|  | switch (ovtype) { | 
|  | case PDEV_OVERLAY: | 
|  | return of_path_platform_device_exists(path); | 
|  | case I2C_OVERLAY: | 
|  | return of_path_i2c_client_exists(path); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *overlay_name_from_nr(int nr) | 
|  | { | 
|  | static char buf[256]; | 
|  |  | 
|  | snprintf(buf, sizeof(buf) - 1, | 
|  | "overlay_%d", nr); | 
|  | buf[sizeof(buf) - 1] = '\0'; | 
|  |  | 
|  | return buf; | 
|  | } | 
|  |  | 
|  | static const char *bus_path = "/testcase-data/overlay-node/test-bus"; | 
|  |  | 
|  | /* FIXME: it is NOT guaranteed that overlay ids are assigned in sequence */ | 
|  |  | 
|  | #define MAX_UNITTEST_OVERLAYS	256 | 
|  | static unsigned long overlay_id_bits[BITS_TO_LONGS(MAX_UNITTEST_OVERLAYS)]; | 
|  | static int overlay_first_id = -1; | 
|  |  | 
|  | static long of_unittest_overlay_tracked(int id) | 
|  | { | 
|  | if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) | 
|  | return 0; | 
|  | return overlay_id_bits[BIT_WORD(id)] & BIT_MASK(id); | 
|  | } | 
|  |  | 
|  | static void of_unittest_track_overlay(int id) | 
|  | { | 
|  | if (overlay_first_id < 0) | 
|  | overlay_first_id = id; | 
|  | id -= overlay_first_id; | 
|  |  | 
|  | if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) | 
|  | return; | 
|  | overlay_id_bits[BIT_WORD(id)] |= BIT_MASK(id); | 
|  | } | 
|  |  | 
|  | static void of_unittest_untrack_overlay(int id) | 
|  | { | 
|  | if (overlay_first_id < 0) | 
|  | return; | 
|  | id -= overlay_first_id; | 
|  | if (WARN_ON(id >= MAX_UNITTEST_OVERLAYS)) | 
|  | return; | 
|  | overlay_id_bits[BIT_WORD(id)] &= ~BIT_MASK(id); | 
|  | } | 
|  |  | 
|  | static void of_unittest_destroy_tracked_overlays(void) | 
|  | { | 
|  | int id, ret, defers, ovcs_id; | 
|  |  | 
|  | if (overlay_first_id < 0) | 
|  | return; | 
|  |  | 
|  | /* try until no defers */ | 
|  | do { | 
|  | defers = 0; | 
|  | /* remove in reverse order */ | 
|  | for (id = MAX_UNITTEST_OVERLAYS - 1; id >= 0; id--) { | 
|  | if (!of_unittest_overlay_tracked(id)) | 
|  | continue; | 
|  |  | 
|  | ovcs_id = id + overlay_first_id; | 
|  | ret = of_overlay_remove(&ovcs_id); | 
|  | if (ret == -ENODEV) { | 
|  | pr_warn("%s: no overlay to destroy for #%d\n", | 
|  | __func__, id + overlay_first_id); | 
|  | continue; | 
|  | } | 
|  | if (ret != 0) { | 
|  | defers++; | 
|  | pr_warn("%s: overlay destroy failed for #%d\n", | 
|  | __func__, id + overlay_first_id); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | of_unittest_untrack_overlay(id); | 
|  | } | 
|  | } while (defers > 0); | 
|  | } | 
|  |  | 
|  | static int __init of_unittest_apply_overlay(int overlay_nr, int *overlay_id) | 
|  | { | 
|  | const char *overlay_name; | 
|  |  | 
|  | overlay_name = overlay_name_from_nr(overlay_nr); | 
|  |  | 
|  | if (!overlay_data_apply(overlay_name, overlay_id)) { | 
|  | unittest(0, "could not apply overlay \"%s\"\n", | 
|  | overlay_name); | 
|  | return -EFAULT; | 
|  | } | 
|  | of_unittest_track_overlay(*overlay_id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* apply an overlay while checking before and after states */ | 
|  | static int __init of_unittest_apply_overlay_check(int overlay_nr, | 
|  | int unittest_nr, int before, int after, | 
|  | enum overlay_type ovtype) | 
|  | { | 
|  | int ret, ovcs_id; | 
|  |  | 
|  | /* unittest device must not be in before state */ | 
|  | if (of_unittest_device_exists(unittest_nr, ovtype) != before) { | 
|  | unittest(0, "%s with device @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype), | 
|  | !before ? "enabled" : "disabled"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ovcs_id = 0; | 
|  | ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id); | 
|  | if (ret != 0) { | 
|  | /* of_unittest_apply_overlay already called unittest() */ | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* unittest device must be to set to after state */ | 
|  | if (of_unittest_device_exists(unittest_nr, ovtype) != after) { | 
|  | unittest(0, "%s failed to create @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype), | 
|  | !after ? "enabled" : "disabled"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* apply an overlay and then revert it while checking before, after states */ | 
|  | static int __init of_unittest_apply_revert_overlay_check(int overlay_nr, | 
|  | int unittest_nr, int before, int after, | 
|  | enum overlay_type ovtype) | 
|  | { | 
|  | int ret, ovcs_id, save_id; | 
|  |  | 
|  | /* unittest device must be in before state */ | 
|  | if (of_unittest_device_exists(unittest_nr, ovtype) != before) { | 
|  | unittest(0, "%s with device @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype), | 
|  | !before ? "enabled" : "disabled"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* apply the overlay */ | 
|  | ovcs_id = 0; | 
|  | ret = of_unittest_apply_overlay(overlay_nr, &ovcs_id); | 
|  | if (ret != 0) { | 
|  | /* of_unittest_apply_overlay already called unittest() */ | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* unittest device must be in after state */ | 
|  | if (of_unittest_device_exists(unittest_nr, ovtype) != after) { | 
|  | unittest(0, "%s failed to create @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype), | 
|  | !after ? "enabled" : "disabled"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | save_id = ovcs_id; | 
|  | ret = of_overlay_remove(&ovcs_id); | 
|  | if (ret != 0) { | 
|  | unittest(0, "%s failed to be destroyed @\"%s\"\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype)); | 
|  | return ret; | 
|  | } | 
|  | of_unittest_untrack_overlay(save_id); | 
|  |  | 
|  | /* unittest device must be again in before state */ | 
|  | if (of_unittest_device_exists(unittest_nr, PDEV_OVERLAY) != before) { | 
|  | unittest(0, "%s with device @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr), | 
|  | unittest_path(unittest_nr, ovtype), | 
|  | !before ? "enabled" : "disabled"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* test activation of device */ | 
|  | static void __init of_unittest_overlay_0(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status"); | 
|  |  | 
|  | /* device should enable */ | 
|  | ret = of_unittest_apply_overlay_check(0, 0, 0, 1, PDEV_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 0); | 
|  | } | 
|  |  | 
|  | /* test deactivation of device */ | 
|  | static void __init of_unittest_overlay_1(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status"); | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_overlay_check(1, 1, 1, 0, PDEV_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 1); | 
|  |  | 
|  | } | 
|  |  | 
|  | /* test activation of device */ | 
|  | static void __init of_unittest_overlay_2(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status"); | 
|  |  | 
|  | /* device should enable */ | 
|  | ret = of_unittest_apply_overlay_check(2, 2, 0, 1, PDEV_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  | unittest(1, "overlay test %d passed\n", 2); | 
|  | } | 
|  |  | 
|  | /* test deactivation of device */ | 
|  | static void __init of_unittest_overlay_3(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status"); | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_overlay_check(3, 3, 1, 0, PDEV_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 3); | 
|  | } | 
|  |  | 
|  | /* test activation of a full device node */ | 
|  | static void __init of_unittest_overlay_4(void) | 
|  | { | 
|  | /* device should disable */ | 
|  | if (of_unittest_apply_overlay_check(4, 4, 0, 1, PDEV_OVERLAY)) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 4); | 
|  | } | 
|  |  | 
|  | /* test overlay apply/revert sequence */ | 
|  | static void __init of_unittest_overlay_5(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status"); | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_revert_overlay_check(5, 5, 0, 1, PDEV_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 5); | 
|  | } | 
|  |  | 
|  | /* test overlay application in sequence */ | 
|  | static void __init of_unittest_overlay_6(void) | 
|  | { | 
|  | int i, ov_id[2], ovcs_id; | 
|  | int overlay_nr = 6, unittest_nr = 6; | 
|  | int before = 0, after = 1; | 
|  | const char *overlay_name; | 
|  |  | 
|  | int ret; | 
|  |  | 
|  | /* unittest device must be in before state */ | 
|  | for (i = 0; i < 2; i++) { | 
|  | if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | 
|  | != before) { | 
|  | unittest(0, "%s with device @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr + i), | 
|  | unittest_path(unittest_nr + i, | 
|  | PDEV_OVERLAY), | 
|  | !before ? "enabled" : "disabled"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* apply the overlays */ | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status"); | 
|  |  | 
|  | overlay_name = overlay_name_from_nr(overlay_nr + 0); | 
|  |  | 
|  | ret = overlay_data_apply(overlay_name, &ovcs_id); | 
|  |  | 
|  | if (!ret) { | 
|  | unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | 
|  | return; | 
|  | } | 
|  | ov_id[0] = ovcs_id; | 
|  | of_unittest_track_overlay(ov_id[0]); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status"); | 
|  |  | 
|  | overlay_name = overlay_name_from_nr(overlay_nr + 1); | 
|  |  | 
|  | ret = overlay_data_apply(overlay_name, &ovcs_id); | 
|  |  | 
|  | if (!ret) { | 
|  | unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | 
|  | return; | 
|  | } | 
|  | ov_id[1] = ovcs_id; | 
|  | of_unittest_track_overlay(ov_id[1]); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status"); | 
|  |  | 
|  |  | 
|  | for (i = 0; i < 2; i++) { | 
|  | /* unittest device must be in after state */ | 
|  | if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | 
|  | != after) { | 
|  | unittest(0, "overlay @\"%s\" failed @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr + i), | 
|  | unittest_path(unittest_nr + i, | 
|  | PDEV_OVERLAY), | 
|  | !after ? "enabled" : "disabled"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 1; i >= 0; i--) { | 
|  | ovcs_id = ov_id[i]; | 
|  | if (of_overlay_remove(&ovcs_id)) { | 
|  | unittest(0, "%s failed destroy @\"%s\"\n", | 
|  | overlay_name_from_nr(overlay_nr + i), | 
|  | unittest_path(unittest_nr + i, | 
|  | PDEV_OVERLAY)); | 
|  | return; | 
|  | } | 
|  | of_unittest_untrack_overlay(ov_id[i]); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 2; i++) { | 
|  | /* unittest device must be again in before state */ | 
|  | if (of_unittest_device_exists(unittest_nr + i, PDEV_OVERLAY) | 
|  | != before) { | 
|  | unittest(0, "%s with device @\"%s\" %s\n", | 
|  | overlay_name_from_nr(overlay_nr + i), | 
|  | unittest_path(unittest_nr + i, | 
|  | PDEV_OVERLAY), | 
|  | !before ? "enabled" : "disabled"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 6); | 
|  |  | 
|  | } | 
|  |  | 
|  | /* test overlay application in sequence */ | 
|  | static void __init of_unittest_overlay_8(void) | 
|  | { | 
|  | int i, ov_id[2], ovcs_id; | 
|  | int overlay_nr = 8, unittest_nr = 8; | 
|  | const char *overlay_name; | 
|  | int ret; | 
|  |  | 
|  | /* we don't care about device state in this test */ | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status"); | 
|  |  | 
|  | overlay_name = overlay_name_from_nr(overlay_nr + 0); | 
|  |  | 
|  | ret = overlay_data_apply(overlay_name, &ovcs_id); | 
|  | if (!ret) | 
|  | unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status"); | 
|  |  | 
|  | if (!ret) | 
|  | return; | 
|  |  | 
|  | ov_id[0] = ovcs_id; | 
|  | of_unittest_track_overlay(ov_id[0]); | 
|  |  | 
|  | overlay_name = overlay_name_from_nr(overlay_nr + 1); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo"); | 
|  |  | 
|  | /* apply the overlays */ | 
|  | ret = overlay_data_apply(overlay_name, &ovcs_id); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo"); | 
|  |  | 
|  | if (!ret) { | 
|  | unittest(0, "could not apply overlay \"%s\"\n", overlay_name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ov_id[1] = ovcs_id; | 
|  | of_unittest_track_overlay(ov_id[1]); | 
|  |  | 
|  | /* now try to remove first overlay (it should fail) */ | 
|  | ovcs_id = ov_id[0]; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: overlay #6 is not topmost"); | 
|  |  | 
|  | ret = of_overlay_remove(&ovcs_id); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: overlay #6 is not topmost"); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8"); | 
|  |  | 
|  | if (!ret) { | 
|  | unittest(0, "%s was destroyed @\"%s\"\n", | 
|  | overlay_name_from_nr(overlay_nr + 0), | 
|  | unittest_path(unittest_nr, | 
|  | PDEV_OVERLAY)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* removing them in order should work */ | 
|  | for (i = 1; i >= 0; i--) { | 
|  | ovcs_id = ov_id[i]; | 
|  | if (of_overlay_remove(&ovcs_id)) { | 
|  | unittest(0, "%s not destroyed @\"%s\"\n", | 
|  | overlay_name_from_nr(overlay_nr + i), | 
|  | unittest_path(unittest_nr, | 
|  | PDEV_OVERLAY)); | 
|  | return; | 
|  | } | 
|  | of_unittest_untrack_overlay(ov_id[i]); | 
|  | } | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 8); | 
|  | } | 
|  |  | 
|  | /* test insertion of a bus with parent devices */ | 
|  | static void __init of_unittest_overlay_10(void) | 
|  | { | 
|  | int ret; | 
|  | char *child_path; | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_overlay_check(10, 10, 0, 1, PDEV_OVERLAY); | 
|  |  | 
|  | if (unittest(ret == 0, | 
|  | "overlay test %d failed; overlay application\n", 10)) | 
|  | return; | 
|  |  | 
|  | child_path = kasprintf(GFP_KERNEL, "%s/test-unittest101", | 
|  | unittest_path(10, PDEV_OVERLAY)); | 
|  | if (unittest(child_path, "overlay test %d failed; kasprintf\n", 10)) | 
|  | return; | 
|  |  | 
|  | ret = of_path_device_type_exists(child_path, PDEV_OVERLAY); | 
|  | kfree(child_path); | 
|  |  | 
|  | unittest(ret, "overlay test %d failed; no child device\n", 10); | 
|  | } | 
|  |  | 
|  | /* test insertion of a bus with parent devices (and revert) */ | 
|  | static void __init of_unittest_overlay_11(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_revert_overlay_check(11, 11, 0, 1, | 
|  | PDEV_OVERLAY); | 
|  |  | 
|  | unittest(ret == 0, "overlay test %d failed; overlay apply\n", 11); | 
|  | } | 
|  |  | 
|  | #if IS_BUILTIN(CONFIG_I2C) && IS_ENABLED(CONFIG_OF_OVERLAY) | 
|  |  | 
|  | struct unittest_i2c_bus_data { | 
|  | struct platform_device	*pdev; | 
|  | struct i2c_adapter	adap; | 
|  | }; | 
|  |  | 
|  | static int unittest_i2c_master_xfer(struct i2c_adapter *adap, | 
|  | struct i2c_msg *msgs, int num) | 
|  | { | 
|  | struct unittest_i2c_bus_data *std = i2c_get_adapdata(adap); | 
|  |  | 
|  | (void)std; | 
|  |  | 
|  | return num; | 
|  | } | 
|  |  | 
|  | static u32 unittest_i2c_functionality(struct i2c_adapter *adap) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; | 
|  | } | 
|  |  | 
|  | static const struct i2c_algorithm unittest_i2c_algo = { | 
|  | .master_xfer	= unittest_i2c_master_xfer, | 
|  | .functionality	= unittest_i2c_functionality, | 
|  | }; | 
|  |  | 
|  | static int unittest_i2c_bus_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  | struct unittest_i2c_bus_data *std; | 
|  | struct i2c_adapter *adap; | 
|  | int ret; | 
|  |  | 
|  | if (np == NULL) { | 
|  | dev_err(dev, "No OF data for device\n"); | 
|  | return -EINVAL; | 
|  |  | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  |  | 
|  | std = devm_kzalloc(dev, sizeof(*std), GFP_KERNEL); | 
|  | if (!std) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* link them together */ | 
|  | std->pdev = pdev; | 
|  | platform_set_drvdata(pdev, std); | 
|  |  | 
|  | adap = &std->adap; | 
|  | i2c_set_adapdata(adap, std); | 
|  | adap->nr = -1; | 
|  | strlcpy(adap->name, pdev->name, sizeof(adap->name)); | 
|  | adap->class = I2C_CLASS_DEPRECATED; | 
|  | adap->algo = &unittest_i2c_algo; | 
|  | adap->dev.parent = dev; | 
|  | adap->dev.of_node = dev->of_node; | 
|  | adap->timeout = 5 * HZ; | 
|  | adap->retries = 3; | 
|  |  | 
|  | ret = i2c_add_numbered_adapter(adap); | 
|  | if (ret != 0) { | 
|  | dev_err(dev, "Failed to add I2C adapter\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int unittest_i2c_bus_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *np = dev->of_node; | 
|  | struct unittest_i2c_bus_data *std = platform_get_drvdata(pdev); | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  | i2c_del_adapter(&std->adap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id unittest_i2c_bus_match[] = { | 
|  | { .compatible = "unittest-i2c-bus", }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver unittest_i2c_bus_driver = { | 
|  | .probe			= unittest_i2c_bus_probe, | 
|  | .remove			= unittest_i2c_bus_remove, | 
|  | .driver = { | 
|  | .name		= "unittest-i2c-bus", | 
|  | .of_match_table	= of_match_ptr(unittest_i2c_bus_match), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int unittest_i2c_dev_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device_node *np = client->dev.of_node; | 
|  |  | 
|  | if (!np) { | 
|  | dev_err(dev, "No OF node\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  |  | 
|  | return 0; | 
|  | }; | 
|  |  | 
|  | static int unittest_i2c_dev_remove(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device_node *np = client->dev.of_node; | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id unittest_i2c_dev_id[] = { | 
|  | { .name = "unittest-i2c-dev" }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver unittest_i2c_dev_driver = { | 
|  | .driver = { | 
|  | .name = "unittest-i2c-dev", | 
|  | }, | 
|  | .probe = unittest_i2c_dev_probe, | 
|  | .remove = unittest_i2c_dev_remove, | 
|  | .id_table = unittest_i2c_dev_id, | 
|  | }; | 
|  |  | 
|  | #if IS_BUILTIN(CONFIG_I2C_MUX) | 
|  |  | 
|  | static int unittest_i2c_mux_select_chan(struct i2c_mux_core *muxc, u32 chan) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int unittest_i2c_mux_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | int i, nchans; | 
|  | struct device *dev = &client->dev; | 
|  | struct i2c_adapter *adap = client->adapter; | 
|  | struct device_node *np = client->dev.of_node, *child; | 
|  | struct i2c_mux_core *muxc; | 
|  | u32 reg, max_reg; | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  |  | 
|  | if (!np) { | 
|  | dev_err(dev, "No OF node\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | max_reg = (u32)-1; | 
|  | for_each_child_of_node(np, child) { | 
|  | if (of_property_read_u32(child, "reg", ®)) | 
|  | continue; | 
|  | if (max_reg == (u32)-1 || reg > max_reg) | 
|  | max_reg = reg; | 
|  | } | 
|  | nchans = max_reg == (u32)-1 ? 0 : max_reg + 1; | 
|  | if (nchans == 0) { | 
|  | dev_err(dev, "No channels\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | muxc = i2c_mux_alloc(adap, dev, nchans, 0, 0, | 
|  | unittest_i2c_mux_select_chan, NULL); | 
|  | if (!muxc) | 
|  | return -ENOMEM; | 
|  | for (i = 0; i < nchans; i++) { | 
|  | if (i2c_mux_add_adapter(muxc, 0, i, 0)) { | 
|  | dev_err(dev, "Failed to register mux #%d\n", i); | 
|  | i2c_mux_del_adapters(muxc); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  |  | 
|  | i2c_set_clientdata(client, muxc); | 
|  |  | 
|  | return 0; | 
|  | }; | 
|  |  | 
|  | static int unittest_i2c_mux_remove(struct i2c_client *client) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device_node *np = client->dev.of_node; | 
|  | struct i2c_mux_core *muxc = i2c_get_clientdata(client); | 
|  |  | 
|  | dev_dbg(dev, "%s for node @%pOF\n", __func__, np); | 
|  | i2c_mux_del_adapters(muxc); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id unittest_i2c_mux_id[] = { | 
|  | { .name = "unittest-i2c-mux" }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver unittest_i2c_mux_driver = { | 
|  | .driver = { | 
|  | .name = "unittest-i2c-mux", | 
|  | }, | 
|  | .probe = unittest_i2c_mux_probe, | 
|  | .remove = unittest_i2c_mux_remove, | 
|  | .id_table = unittest_i2c_mux_id, | 
|  | }; | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static int of_unittest_overlay_i2c_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_add_driver(&unittest_i2c_dev_driver); | 
|  | if (unittest(ret == 0, | 
|  | "could not register unittest i2c device driver\n")) | 
|  | return ret; | 
|  |  | 
|  | ret = platform_driver_register(&unittest_i2c_bus_driver); | 
|  |  | 
|  | if (unittest(ret == 0, | 
|  | "could not register unittest i2c bus driver\n")) | 
|  | return ret; | 
|  |  | 
|  | #if IS_BUILTIN(CONFIG_I2C_MUX) | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "i2c i2c-1: Added multiplexed i2c bus 2"); | 
|  |  | 
|  | ret = i2c_add_driver(&unittest_i2c_mux_driver); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "i2c i2c-1: Added multiplexed i2c bus 2"); | 
|  |  | 
|  | if (unittest(ret == 0, | 
|  | "could not register unittest i2c mux driver\n")) | 
|  | return ret; | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void of_unittest_overlay_i2c_cleanup(void) | 
|  | { | 
|  | #if IS_BUILTIN(CONFIG_I2C_MUX) | 
|  | i2c_del_driver(&unittest_i2c_mux_driver); | 
|  | #endif | 
|  | platform_driver_unregister(&unittest_i2c_bus_driver); | 
|  | i2c_del_driver(&unittest_i2c_dev_driver); | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_overlay_i2c_12(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* device should enable */ | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status"); | 
|  |  | 
|  | ret = of_unittest_apply_overlay_check(12, 12, 0, 1, I2C_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 12); | 
|  | } | 
|  |  | 
|  | /* test deactivation of device */ | 
|  | static void __init of_unittest_overlay_i2c_13(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status"); | 
|  |  | 
|  | /* device should disable */ | 
|  | ret = of_unittest_apply_overlay_check(13, 13, 1, 0, I2C_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 13); | 
|  | } | 
|  |  | 
|  | /* just check for i2c mux existence */ | 
|  | static void of_unittest_overlay_i2c_14(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void __init of_unittest_overlay_i2c_15(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* device should enable */ | 
|  | EXPECT_BEGIN(KERN_INFO, | 
|  | "i2c i2c-1: Added multiplexed i2c bus 3"); | 
|  |  | 
|  | ret = of_unittest_apply_overlay_check(15, 15, 0, 1, I2C_OVERLAY); | 
|  |  | 
|  | EXPECT_END(KERN_INFO, | 
|  | "i2c i2c-1: Added multiplexed i2c bus 3"); | 
|  |  | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | unittest(1, "overlay test %d passed\n", 15); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline void of_unittest_overlay_i2c_14(void) { } | 
|  | static inline void of_unittest_overlay_i2c_15(void) { } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static void __init of_unittest_overlay(void) | 
|  | { | 
|  | struct device_node *bus_np = NULL; | 
|  |  | 
|  | if (platform_driver_register(&unittest_driver)) { | 
|  | unittest(0, "could not register unittest driver\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | bus_np = of_find_node_by_path(bus_path); | 
|  | if (bus_np == NULL) { | 
|  | unittest(0, "could not find bus_path \"%s\"\n", bus_path); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (of_platform_default_populate(bus_np, NULL, NULL)) { | 
|  | unittest(0, "could not populate bus @ \"%s\"\n", bus_path); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!of_unittest_device_exists(100, PDEV_OVERLAY)) { | 
|  | unittest(0, "could not find unittest0 @ \"%s\"\n", | 
|  | unittest_path(100, PDEV_OVERLAY)); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (of_unittest_device_exists(101, PDEV_OVERLAY)) { | 
|  | unittest(0, "unittest1 @ \"%s\" should not exist\n", | 
|  | unittest_path(101, PDEV_OVERLAY)); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | unittest(1, "basic infrastructure of overlays passed"); | 
|  |  | 
|  | /* tests in sequence */ | 
|  | of_unittest_overlay_0(); | 
|  | of_unittest_overlay_1(); | 
|  | of_unittest_overlay_2(); | 
|  | of_unittest_overlay_3(); | 
|  | of_unittest_overlay_4(); | 
|  | of_unittest_overlay_5(); | 
|  | of_unittest_overlay_6(); | 
|  | of_unittest_overlay_8(); | 
|  |  | 
|  | of_unittest_overlay_10(); | 
|  | of_unittest_overlay_11(); | 
|  |  | 
|  | #if IS_BUILTIN(CONFIG_I2C) | 
|  | if (unittest(of_unittest_overlay_i2c_init() == 0, "i2c init failed\n")) | 
|  | goto out; | 
|  |  | 
|  | of_unittest_overlay_i2c_12(); | 
|  | of_unittest_overlay_i2c_13(); | 
|  | of_unittest_overlay_i2c_14(); | 
|  | of_unittest_overlay_i2c_15(); | 
|  |  | 
|  | of_unittest_overlay_i2c_cleanup(); | 
|  | #endif | 
|  |  | 
|  | of_unittest_overlay_gpio(); | 
|  |  | 
|  | of_unittest_destroy_tracked_overlays(); | 
|  |  | 
|  | out: | 
|  | of_node_put(bus_np); | 
|  | } | 
|  |  | 
|  | #else | 
|  | static inline void __init of_unittest_overlay(void) { } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_OF_OVERLAY | 
|  |  | 
|  | /* | 
|  | * __dtb_ot_begin[] and __dtb_ot_end[] are created by cmd_dt_S_dtb | 
|  | * in scripts/Makefile.lib | 
|  | */ | 
|  |  | 
|  | #define OVERLAY_INFO_EXTERN(name) \ | 
|  | extern uint8_t __dtb_##name##_begin[]; \ | 
|  | extern uint8_t __dtb_##name##_end[] | 
|  |  | 
|  | #define OVERLAY_INFO(overlay_name, expected)             \ | 
|  | {	.dtb_begin       = __dtb_##overlay_name##_begin, \ | 
|  | .dtb_end         = __dtb_##overlay_name##_end,   \ | 
|  | .expected_result = expected,                     \ | 
|  | .name            = #overlay_name,                \ | 
|  | } | 
|  |  | 
|  | struct overlay_info { | 
|  | uint8_t		*dtb_begin; | 
|  | uint8_t		*dtb_end; | 
|  | int		expected_result; | 
|  | int		overlay_id; | 
|  | char		*name; | 
|  | }; | 
|  |  | 
|  | OVERLAY_INFO_EXTERN(overlay_base); | 
|  | OVERLAY_INFO_EXTERN(overlay); | 
|  | OVERLAY_INFO_EXTERN(overlay_0); | 
|  | OVERLAY_INFO_EXTERN(overlay_1); | 
|  | OVERLAY_INFO_EXTERN(overlay_2); | 
|  | OVERLAY_INFO_EXTERN(overlay_3); | 
|  | OVERLAY_INFO_EXTERN(overlay_4); | 
|  | OVERLAY_INFO_EXTERN(overlay_5); | 
|  | OVERLAY_INFO_EXTERN(overlay_6); | 
|  | OVERLAY_INFO_EXTERN(overlay_7); | 
|  | OVERLAY_INFO_EXTERN(overlay_8); | 
|  | OVERLAY_INFO_EXTERN(overlay_9); | 
|  | OVERLAY_INFO_EXTERN(overlay_10); | 
|  | OVERLAY_INFO_EXTERN(overlay_11); | 
|  | OVERLAY_INFO_EXTERN(overlay_12); | 
|  | OVERLAY_INFO_EXTERN(overlay_13); | 
|  | OVERLAY_INFO_EXTERN(overlay_15); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_01); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_02a); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_02b); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_03); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_04a); | 
|  | OVERLAY_INFO_EXTERN(overlay_gpio_04b); | 
|  | OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node); | 
|  | OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop); | 
|  | OVERLAY_INFO_EXTERN(overlay_bad_phandle); | 
|  | OVERLAY_INFO_EXTERN(overlay_bad_symbol); | 
|  |  | 
|  | /* entries found by name */ | 
|  | static struct overlay_info overlays[] = { | 
|  | OVERLAY_INFO(overlay_base, -9999), | 
|  | OVERLAY_INFO(overlay, 0), | 
|  | OVERLAY_INFO(overlay_0, 0), | 
|  | OVERLAY_INFO(overlay_1, 0), | 
|  | OVERLAY_INFO(overlay_2, 0), | 
|  | OVERLAY_INFO(overlay_3, 0), | 
|  | OVERLAY_INFO(overlay_4, 0), | 
|  | OVERLAY_INFO(overlay_5, 0), | 
|  | OVERLAY_INFO(overlay_6, 0), | 
|  | OVERLAY_INFO(overlay_7, 0), | 
|  | OVERLAY_INFO(overlay_8, 0), | 
|  | OVERLAY_INFO(overlay_9, 0), | 
|  | OVERLAY_INFO(overlay_10, 0), | 
|  | OVERLAY_INFO(overlay_11, 0), | 
|  | OVERLAY_INFO(overlay_12, 0), | 
|  | OVERLAY_INFO(overlay_13, 0), | 
|  | OVERLAY_INFO(overlay_15, 0), | 
|  | OVERLAY_INFO(overlay_gpio_01, 0), | 
|  | OVERLAY_INFO(overlay_gpio_02a, 0), | 
|  | OVERLAY_INFO(overlay_gpio_02b, 0), | 
|  | OVERLAY_INFO(overlay_gpio_03, 0), | 
|  | OVERLAY_INFO(overlay_gpio_04a, 0), | 
|  | OVERLAY_INFO(overlay_gpio_04b, 0), | 
|  | OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL), | 
|  | OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL), | 
|  | OVERLAY_INFO(overlay_bad_phandle, -EINVAL), | 
|  | OVERLAY_INFO(overlay_bad_symbol, -EINVAL), | 
|  | /* end marker */ | 
|  | {.dtb_begin = NULL, .dtb_end = NULL, .expected_result = 0, .name = NULL} | 
|  | }; | 
|  |  | 
|  | static struct device_node *overlay_base_root; | 
|  |  | 
|  | static void * __init dt_alloc_memory(u64 size, u64 align) | 
|  | { | 
|  | void *ptr = memblock_alloc(size, align); | 
|  |  | 
|  | if (!ptr) | 
|  | panic("%s: Failed to allocate %llu bytes align=0x%llx\n", | 
|  | __func__, size, align); | 
|  |  | 
|  | return ptr; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create base device tree for the overlay unittest. | 
|  | * | 
|  | * This is called from very early boot code. | 
|  | * | 
|  | * Do as much as possible the same way as done in __unflatten_device_tree | 
|  | * and other early boot steps for the normal FDT so that the overlay base | 
|  | * unflattened tree will have the same characteristics as the real tree | 
|  | * (such as having memory allocated by the early allocator).  The goal | 
|  | * is to test "the real thing" as much as possible, and test "test setup | 
|  | * code" as little as possible. | 
|  | * | 
|  | * Have to stop before resolving phandles, because that uses kmalloc. | 
|  | */ | 
|  | void __init unittest_unflatten_overlay_base(void) | 
|  | { | 
|  | struct overlay_info *info; | 
|  | u32 data_size; | 
|  | void *new_fdt; | 
|  | u32 size; | 
|  | int found = 0; | 
|  | const char *overlay_name = "overlay_base"; | 
|  |  | 
|  | for (info = overlays; info && info->name; info++) { | 
|  | if (!strcmp(overlay_name, info->name)) { | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) { | 
|  | pr_err("no overlay data for %s\n", overlay_name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | info = &overlays[0]; | 
|  |  | 
|  | if (info->expected_result != -9999) { | 
|  | pr_err("No dtb 'overlay_base' to attach\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | data_size = info->dtb_end - info->dtb_begin; | 
|  | if (!data_size) { | 
|  | pr_err("No dtb 'overlay_base' to attach\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | size = fdt_totalsize(info->dtb_begin); | 
|  | if (size != data_size) { | 
|  | pr_err("dtb 'overlay_base' header totalsize != actual size"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | new_fdt = dt_alloc_memory(size, roundup_pow_of_two(FDT_V17_SIZE)); | 
|  | if (!new_fdt) { | 
|  | pr_err("alloc for dtb 'overlay_base' failed"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memcpy(new_fdt, info->dtb_begin, size); | 
|  |  | 
|  | __unflatten_device_tree(new_fdt, NULL, &overlay_base_root, | 
|  | dt_alloc_memory, true); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The purpose of of_unittest_overlay_data_add is to add an | 
|  | * overlay in the normal fashion.  This is a test of the whole | 
|  | * picture, instead of testing individual elements. | 
|  | * | 
|  | * A secondary purpose is to be able to verify that the contents of | 
|  | * /proc/device-tree/ contains the updated structure and values from | 
|  | * the overlay.  That must be verified separately in user space. | 
|  | * | 
|  | * Return 0 on unexpected error. | 
|  | */ | 
|  | static int __init overlay_data_apply(const char *overlay_name, int *overlay_id) | 
|  | { | 
|  | struct overlay_info *info; | 
|  | int found = 0; | 
|  | int ret; | 
|  | u32 size; | 
|  |  | 
|  | for (info = overlays; info && info->name; info++) { | 
|  | if (!strcmp(overlay_name, info->name)) { | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) { | 
|  | pr_err("no overlay data for %s\n", overlay_name); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | size = info->dtb_end - info->dtb_begin; | 
|  | if (!size) | 
|  | pr_err("no overlay data for %s\n", overlay_name); | 
|  |  | 
|  | ret = of_overlay_fdt_apply(info->dtb_begin, size, &info->overlay_id); | 
|  | if (overlay_id) | 
|  | *overlay_id = info->overlay_id; | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | pr_debug("%s applied\n", overlay_name); | 
|  |  | 
|  | out: | 
|  | if (ret != info->expected_result) | 
|  | pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n", | 
|  | info->expected_result, ret, overlay_name); | 
|  |  | 
|  | return (ret == info->expected_result); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The purpose of of_unittest_overlay_high_level is to add an overlay | 
|  | * in the normal fashion.  This is a test of the whole picture, | 
|  | * instead of individual elements. | 
|  | * | 
|  | * The first part of the function is _not_ normal overlay usage; it is | 
|  | * finishing splicing the base overlay device tree into the live tree. | 
|  | */ | 
|  | static __init void of_unittest_overlay_high_level(void) | 
|  | { | 
|  | struct device_node *last_sibling; | 
|  | struct device_node *np; | 
|  | struct device_node *of_symbols; | 
|  | struct device_node *overlay_base_symbols; | 
|  | struct device_node **pprev; | 
|  | struct property *prop; | 
|  | int ret; | 
|  |  | 
|  | if (!overlay_base_root) { | 
|  | unittest(0, "overlay_base_root not initialized\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Could not fixup phandles in unittest_unflatten_overlay_base() | 
|  | * because kmalloc() was not yet available. | 
|  | */ | 
|  | of_overlay_mutex_lock(); | 
|  | of_resolve_phandles(overlay_base_root); | 
|  | of_overlay_mutex_unlock(); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * do not allow overlay_base to duplicate any node already in | 
|  | * tree, this greatly simplifies the code | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * remove overlay_base_root node "__local_fixups", after | 
|  | * being used by of_resolve_phandles() | 
|  | */ | 
|  | pprev = &overlay_base_root->child; | 
|  | for (np = overlay_base_root->child; np; np = np->sibling) { | 
|  | if (of_node_name_eq(np, "__local_fixups__")) { | 
|  | *pprev = np->sibling; | 
|  | break; | 
|  | } | 
|  | pprev = &np->sibling; | 
|  | } | 
|  |  | 
|  | /* remove overlay_base_root node "__symbols__" if in live tree */ | 
|  | of_symbols = of_get_child_by_name(of_root, "__symbols__"); | 
|  | if (of_symbols) { | 
|  | /* will have to graft properties from node into live tree */ | 
|  | pprev = &overlay_base_root->child; | 
|  | for (np = overlay_base_root->child; np; np = np->sibling) { | 
|  | if (of_node_name_eq(np, "__symbols__")) { | 
|  | overlay_base_symbols = np; | 
|  | *pprev = np->sibling; | 
|  | break; | 
|  | } | 
|  | pprev = &np->sibling; | 
|  | } | 
|  | } | 
|  |  | 
|  | for_each_child_of_node(overlay_base_root, np) { | 
|  | struct device_node *base_child; | 
|  | for_each_child_of_node(of_root, base_child) { | 
|  | if (!strcmp(np->full_name, base_child->full_name)) { | 
|  | unittest(0, "illegal node name in overlay_base %pOFn", | 
|  | np); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * overlay 'overlay_base' is not allowed to have root | 
|  | * properties, so only need to splice nodes into main device tree. | 
|  | * | 
|  | * root node of *overlay_base_root will not be freed, it is lost | 
|  | * memory. | 
|  | */ | 
|  |  | 
|  | for (np = overlay_base_root->child; np; np = np->sibling) | 
|  | np->parent = of_root; | 
|  |  | 
|  | mutex_lock(&of_mutex); | 
|  |  | 
|  | for (last_sibling = np = of_root->child; np; np = np->sibling) | 
|  | last_sibling = np; | 
|  |  | 
|  | if (last_sibling) | 
|  | last_sibling->sibling = overlay_base_root->child; | 
|  | else | 
|  | of_root->child = overlay_base_root->child; | 
|  |  | 
|  | for_each_of_allnodes_from(overlay_base_root, np) | 
|  | __of_attach_node_sysfs(np); | 
|  |  | 
|  | if (of_symbols) { | 
|  | struct property *new_prop; | 
|  | for_each_property_of_node(overlay_base_symbols, prop) { | 
|  |  | 
|  | new_prop = __of_prop_dup(prop, GFP_KERNEL); | 
|  | if (!new_prop) { | 
|  | unittest(0, "__of_prop_dup() of '%s' from overlay_base node __symbols__", | 
|  | prop->name); | 
|  | goto err_unlock; | 
|  | } | 
|  | if (__of_add_property(of_symbols, new_prop)) { | 
|  | kfree(new_prop->name); | 
|  | kfree(new_prop->value); | 
|  | kfree(new_prop); | 
|  | /* "name" auto-generated by unflatten */ | 
|  | if (!strcmp(prop->name, "name")) | 
|  | continue; | 
|  | unittest(0, "duplicate property '%s' in overlay_base node __symbols__", | 
|  | prop->name); | 
|  | goto err_unlock; | 
|  | } | 
|  | if (__of_add_property_sysfs(of_symbols, new_prop)) { | 
|  | unittest(0, "unable to add property '%s' in overlay_base node __symbols__ to sysfs", | 
|  | prop->name); | 
|  | goto err_unlock; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&of_mutex); | 
|  |  | 
|  |  | 
|  | /* now do the normal overlay usage test */ | 
|  |  | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right"); | 
|  |  | 
|  | ret = overlay_data_apply("overlay", NULL); | 
|  |  | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status"); | 
|  |  | 
|  | unittest(ret, "Adding overlay 'overlay' failed\n"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL), | 
|  | "Adding overlay 'overlay_bad_add_dup_node' failed\n"); | 
|  |  | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller"); | 
|  |  | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); | 
|  | EXPECT_BEGIN(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL), | 
|  | "Adding overlay 'overlay_bad_add_dup_prop' failed\n"); | 
|  |  | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail"); | 
|  | EXPECT_END(KERN_ERR, | 
|  | "OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/electric"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_bad_phandle", NULL), | 
|  | "Adding overlay 'overlay_bad_phandle' failed\n"); | 
|  |  | 
|  | unittest(overlay_data_apply("overlay_bad_symbol", NULL), | 
|  | "Adding overlay 'overlay_bad_symbol' failed\n"); | 
|  |  | 
|  | return; | 
|  |  | 
|  | err_unlock: | 
|  | mutex_unlock(&of_mutex); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static inline __init void of_unittest_overlay_high_level(void) {} | 
|  |  | 
|  | #endif | 
|  |  | 
|  | static int __init of_unittest(void) | 
|  | { | 
|  | struct device_node *np; | 
|  | int res; | 
|  |  | 
|  | pr_info("start of unittest - you will see error messages\n"); | 
|  |  | 
|  | /* adding data for unittest */ | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_UML)) | 
|  | unittest_unflatten_overlay_base(); | 
|  |  | 
|  | res = unittest_data_add(); | 
|  | if (res) | 
|  | return res; | 
|  | if (!of_aliases) | 
|  | of_aliases = of_find_node_by_path("/aliases"); | 
|  |  | 
|  | np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a"); | 
|  | if (!np) { | 
|  | pr_info("No testcase data in device tree; not running tests\n"); | 
|  | return 0; | 
|  | } | 
|  | of_node_put(np); | 
|  |  | 
|  | of_unittest_check_tree_linkage(); | 
|  | of_unittest_check_phandles(); | 
|  | of_unittest_find_node_by_name(); | 
|  | of_unittest_dynamic(); | 
|  | of_unittest_parse_phandle_with_args(); | 
|  | of_unittest_parse_phandle_with_args_map(); | 
|  | of_unittest_printf(); | 
|  | of_unittest_property_string(); | 
|  | of_unittest_property_copy(); | 
|  | of_unittest_changeset(); | 
|  | of_unittest_parse_interrupts(); | 
|  | of_unittest_parse_interrupts_extended(); | 
|  | of_unittest_dma_get_max_cpu_address(); | 
|  | of_unittest_parse_dma_ranges(); | 
|  | of_unittest_pci_dma_ranges(); | 
|  | of_unittest_match_node(); | 
|  | of_unittest_platform_populate(); | 
|  | of_unittest_overlay(); | 
|  |  | 
|  | /* Double check linkage after removing testcase data */ | 
|  | of_unittest_check_tree_linkage(); | 
|  |  | 
|  | of_unittest_overlay_high_level(); | 
|  |  | 
|  | pr_info("end of unittest - %i passed, %i failed\n", | 
|  | unittest_results.passed, unittest_results.failed); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | late_initcall(of_unittest); |