|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * u-blox GNSS receiver driver | 
|  | * | 
|  | * Copyright (C) 2018 Johan Hovold <johan@kernel.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/errno.h> | 
|  | #include <linux/gnss.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/serdev.h> | 
|  |  | 
|  | #include "serial.h" | 
|  |  | 
|  | struct ubx_data { | 
|  | struct regulator *v_bckp; | 
|  | struct regulator *vcc; | 
|  | }; | 
|  |  | 
|  | static int ubx_set_active(struct gnss_serial *gserial) | 
|  | { | 
|  | struct ubx_data *data = gnss_serial_get_drvdata(gserial); | 
|  | int ret; | 
|  |  | 
|  | ret = regulator_enable(data->vcc); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ubx_set_standby(struct gnss_serial *gserial) | 
|  | { | 
|  | struct ubx_data *data = gnss_serial_get_drvdata(gserial); | 
|  | int ret; | 
|  |  | 
|  | ret = regulator_disable(data->vcc); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ubx_set_power(struct gnss_serial *gserial, | 
|  | enum gnss_serial_pm_state state) | 
|  | { | 
|  | switch (state) { | 
|  | case GNSS_SERIAL_ACTIVE: | 
|  | return ubx_set_active(gserial); | 
|  | case GNSS_SERIAL_OFF: | 
|  | case GNSS_SERIAL_STANDBY: | 
|  | return ubx_set_standby(gserial); | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static const struct gnss_serial_ops ubx_gserial_ops = { | 
|  | .set_power = ubx_set_power, | 
|  | }; | 
|  |  | 
|  | static int ubx_probe(struct serdev_device *serdev) | 
|  | { | 
|  | struct gnss_serial *gserial; | 
|  | struct ubx_data *data; | 
|  | int ret; | 
|  |  | 
|  | gserial = gnss_serial_allocate(serdev, sizeof(*data)); | 
|  | if (IS_ERR(gserial)) { | 
|  | ret = PTR_ERR(gserial); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | gserial->ops = &ubx_gserial_ops; | 
|  |  | 
|  | gserial->gdev->type = GNSS_TYPE_UBX; | 
|  |  | 
|  | data = gnss_serial_get_drvdata(gserial); | 
|  |  | 
|  | data->vcc = devm_regulator_get(&serdev->dev, "vcc"); | 
|  | if (IS_ERR(data->vcc)) { | 
|  | ret = PTR_ERR(data->vcc); | 
|  | goto err_free_gserial; | 
|  | } | 
|  |  | 
|  | data->v_bckp = devm_regulator_get_optional(&serdev->dev, "v-bckp"); | 
|  | if (IS_ERR(data->v_bckp)) { | 
|  | ret = PTR_ERR(data->v_bckp); | 
|  | if (ret == -ENODEV) | 
|  | data->v_bckp = NULL; | 
|  | else | 
|  | goto err_free_gserial; | 
|  | } | 
|  |  | 
|  | if (data->v_bckp) { | 
|  | ret = regulator_enable(data->v_bckp); | 
|  | if (ret) | 
|  | goto err_free_gserial; | 
|  | } | 
|  |  | 
|  | ret = gnss_serial_register(gserial); | 
|  | if (ret) | 
|  | goto err_disable_v_bckp; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_disable_v_bckp: | 
|  | if (data->v_bckp) | 
|  | regulator_disable(data->v_bckp); | 
|  | err_free_gserial: | 
|  | gnss_serial_free(gserial); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ubx_remove(struct serdev_device *serdev) | 
|  | { | 
|  | struct gnss_serial *gserial = serdev_device_get_drvdata(serdev); | 
|  | struct ubx_data *data = gnss_serial_get_drvdata(gserial); | 
|  |  | 
|  | gnss_serial_deregister(gserial); | 
|  | if (data->v_bckp) | 
|  | regulator_disable(data->v_bckp); | 
|  | gnss_serial_free(gserial); | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id ubx_of_match[] = { | 
|  | { .compatible = "u-blox,neo-6m" }, | 
|  | { .compatible = "u-blox,neo-8" }, | 
|  | { .compatible = "u-blox,neo-m8" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ubx_of_match); | 
|  | #endif | 
|  |  | 
|  | static struct serdev_device_driver ubx_driver = { | 
|  | .driver	= { | 
|  | .name		= "gnss-ubx", | 
|  | .of_match_table	= of_match_ptr(ubx_of_match), | 
|  | .pm		= &gnss_serial_pm_ops, | 
|  | }, | 
|  | .probe	= ubx_probe, | 
|  | .remove	= ubx_remove, | 
|  | }; | 
|  | module_serdev_device_driver(ubx_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Johan Hovold <johan@kernel.org>"); | 
|  | MODULE_DESCRIPTION("u-blox GNSS receiver driver"); | 
|  | MODULE_LICENSE("GPL v2"); |