blob: ddfb8187290662e60ba335e279a7466d8379e7d1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver.
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
*/
#include <linux/acpi.h>
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_data/i2c-designware.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/reset.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return clk_get_rate(dev->clk)/1000;
}
#ifdef CONFIG_ACPI
/*
* The HCNT/LCNT information coming from ACPI should be the most accurate
* for given platform. However, some systems get it wrong. On such systems
* we get better results by calculating those based on the input clock.
*/
static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
{
.ident = "Dell Inspiron 7348",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
},
},
{ }
};
static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
u16 *hcnt, u16 *lcnt, u32 *sda_hold)
{
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
union acpi_object *obj;
if (dmi_check_system(dw_i2c_no_acpi_params))
return;
if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
return;
obj = (union acpi_object *)buf.pointer;
if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
const union acpi_object *objs = obj->package.elements;
*hcnt = (u16)objs[0].integer.value;
*lcnt = (u16)objs[1].integer.value;
*sda_hold = (u32)objs[2].integer.value;
}
kfree(buf.pointer);
}
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
struct i2c_timings *t = &dev->timings;
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
dev->tx_fifo_depth = 32;
dev->rx_fifo_depth = 32;
/*
* Try to get SDA hold time and *CNT values from an ACPI method for
* selected speed modes.
*/
dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
switch (t->bus_freq_hz) {
case 100000:
dev->sda_hold_time = ss_ht;
break;
case 1000000:
dev->sda_hold_time = fp_ht;
break;
case 3400000:
dev->sda_hold_time = hs_ht;
break;
case 400000:
default:
dev->sda_hold_time = fs_ht;
break;
}
return 0;
}
static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "INT33C2", 0 },
{ "INT33C3", 0 },
{ "INT3432", 0 },
{ "INT3433", 0 },
{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
{ "808622C1", ACCESS_NO_IRQ_SUSPEND | MODEL_CHERRYTRAIL },
{ "AMD0010", ACCESS_INTR_MASK },
{ "AMDI0010", ACCESS_INTR_MASK },
{ "AMDI0510", 0 },
{ "APMC0D0F", 0 },
{ "HISI02A1", 0 },
{ "HISI02A2", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
#else
static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
{
return -ENODEV;
}
#endif
#ifdef CONFIG_OF
#define MSCC_ICPU_CFG_TWI_DELAY 0x0
#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0)
#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4
static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
{
writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
return 0;
}
static int dw_i2c_of_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
struct resource *mem;
switch (dev->flags & MODEL_MASK) {
case MODEL_MSCC_OCELOT:
mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
dev->ext = devm_ioremap_resource(&pdev->dev, mem);
if (!IS_ERR(dev->ext))
dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
break;
default:
break;
}
return 0;
}
static const struct of_device_id dw_i2c_of_match[] = {
{ .compatible = "snps,designware-i2c", },
{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
{},
};
MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
#else
static inline int dw_i2c_of_configure(struct platform_device *pdev)
{
return -ENODEV;
}
#endif
static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
{
struct i2c_timings *t = &dev->timings;
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN;
dev->mode = DW_IC_MASTER;
switch (t->bus_freq_hz) {
case 100000:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
break;
case 3400000:
dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
break;
default:
dev->master_cfg |= DW_IC_CON_SPEED_FAST;
}
}
static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
{
dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
dev->mode = DW_IC_SLAVE;
}
static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev)
{
u32 param, tx_fifo_depth, rx_fifo_depth;
/*
* Try to detect the FIFO depth if not set by interface driver,
* the depth could be from 2 to 256 from HW spec.
*/
param = i2c_dw_read_comp_param(dev);
tx_fifo_depth = ((param >> 16) & 0xff) + 1;
rx_fifo_depth = ((param >> 8) & 0xff) + 1;
if (!dev->tx_fifo_depth) {
dev->tx_fifo_depth = tx_fifo_depth;
dev->rx_fifo_depth = rx_fifo_depth;
} else if (tx_fifo_depth >= 2) {
dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth,
tx_fifo_depth);
dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth,
rx_fifo_depth);
}
}
static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
{
pm_runtime_disable(dev->dev);
if (dev->shared_with_punit)
pm_runtime_put_noidle(dev->dev);
}
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
struct i2c_timings *t;
u32 acpi_speed;
struct resource *mem;
int i, irq, ret;
static const int supported_speeds[] = {
0, 100000, 400000, 1000000, 3400000
};
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base))
return PTR_ERR(dev->base);
dev->dev = &pdev->dev;
dev->irq = irq;
platform_set_drvdata(pdev, dev);
dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
if (IS_ERR(dev->rst)) {
if (PTR_ERR(dev->rst) == -EPROBE_DEFER)
return -EPROBE_DEFER;
} else {
reset_control_deassert(dev->rst);
}
t = &dev->timings;
if (pdata)
t->bus_freq_hz = pdata->i2c_scl_freq;
else
i2c_parse_fw_timings(&pdev->dev, t, false);
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
/*
* Some DSTDs use a non standard speed, round down to the lowest
* standard speed.
*/
for (i = 1; i < ARRAY_SIZE(supported_speeds); i++) {
if (acpi_speed < supported_speeds[i])
break;
}
acpi_speed = supported_speeds[i - 1];
/*
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
if (acpi_speed && t->bus_freq_hz)
t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
else if (acpi_speed || t->bus_freq_hz)
t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
else
t->bus_freq_hz = 400000;
dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
if (pdev->dev.of_node)
dw_i2c_of_configure(pdev);
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
/*
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
dev_err(&pdev->dev,
"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
t->bus_freq_hz);
ret = -EINVAL;
goto exit_reset;
}
ret = i2c_dw_probe_lock_support(dev);
if (ret)
goto exit_reset;
if (i2c_detect_slave_mode(&pdev->dev))
i2c_dw_configure_slave(dev);
else
i2c_dw_configure_master(dev);
/* Optional interface clock */
dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
if (IS_ERR(dev->pclk))
return PTR_ERR(dev->pclk);
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_prepare_clk(dev, true)) {
u64 clk_khz;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
clk_khz = dev->get_clk_rate_khz(dev);
if (!dev->sda_hold_time && t->sda_hold_ns)
dev->sda_hold_time =
div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
}
dw_i2c_set_fifo_size(dev);
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = I2C_CLASS_DEPRECATED;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->dev.of_node = pdev->dev.of_node;
adap->nr = -1;
dev_pm_set_driver_flags(&pdev->dev,
DPM_FLAG_SMART_PREPARE |
DPM_FLAG_SMART_SUSPEND |
DPM_FLAG_LEAVE_SUSPENDED);
/* The code below assumes runtime PM to be disabled. */
WARN_ON(pm_runtime_enabled(&pdev->dev));
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
if (dev->shared_with_punit)
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (dev->mode == DW_IC_SLAVE)
ret = i2c_dw_probe_slave(dev);
else
ret = i2c_dw_probe(dev);
if (ret)
goto exit_probe;
return ret;
exit_probe:
dw_i2c_plat_pm_cleanup(dev);
exit_reset:
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
return ret;
}
static int dw_i2c_plat_remove(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
pm_runtime_get_sync(&pdev->dev);
i2c_del_adapter(&dev->adapter);
dev->disable(dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
dw_i2c_plat_pm_cleanup(dev);
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int dw_i2c_plat_prepare(struct device *dev)
{
/*
* If the ACPI companion device object is present for this device, it
* may be accessed during suspend and resume of other devices via I2C
* operation regions, so tell the PM core and middle layers to avoid
* skipping system suspend/resume callbacks for it in that case.
*/
return !has_acpi_companion(dev);
}
static void dw_i2c_plat_complete(struct device *dev)
{
/*
* The device can only be in runtime suspend at this point if it has not
* been resumed throughout the ending system suspend/resume cycle, so if
* the platform firmware might mess up with it, request the runtime PM
* framework to resume it.
*/
if (pm_runtime_suspended(dev) && pm_resume_via_firmware())
pm_request_resume(dev);
}
#else
#define dw_i2c_plat_prepare NULL
#define dw_i2c_plat_complete NULL
#endif
#ifdef CONFIG_PM
static int dw_i2c_plat_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
i_dev->suspended = true;
if (i_dev->shared_with_punit)
return 0;
i_dev->disable(i_dev);
i2c_dw_prepare_clk(i_dev, false);
return 0;
}
static int dw_i2c_plat_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
if (!i_dev->shared_with_punit)
i2c_dw_prepare_clk(i_dev, true);
i_dev->init(i_dev);
i_dev->suspended = false;
return 0;
}
static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
.prepare = dw_i2c_plat_prepare,
.complete = dw_i2c_plat_complete,
SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
};
#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
#else
#define DW_I2C_DEV_PMOPS NULL
#endif
/* Work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
.probe = dw_i2c_plat_probe,
.remove = dw_i2c_plat_remove,
.driver = {
.name = "i2c_designware",
.of_match_table = of_match_ptr(dw_i2c_of_match),
.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
.pm = DW_I2C_DEV_PMOPS,
},
};
static int __init dw_i2c_init_driver(void)
{
return platform_driver_register(&dw_i2c_driver);
}
subsys_initcall(dw_i2c_init_driver);
static void __exit dw_i2c_exit_driver(void)
{
platform_driver_unregister(&dw_i2c_driver);
}
module_exit(dw_i2c_exit_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
MODULE_LICENSE("GPL");