blob: cdfdef66ff8e44c15b3a47568aabb84693094cee [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Intel Keem Bay PWM driver
*
* Copyright (C) 2020 Intel Corporation
* Authors: Lai Poey Seng <poey.seng.lai@intel.com>
* Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
*
* Limitations:
* - Upon disabling a channel, the currently running
* period will not be completed. However, upon
* reconfiguration of the duty cycle/period, the
* currently running period will be completed first.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#define KMB_TOTAL_PWM_CHANNELS 6
#define KMB_PWM_COUNT_MAX U16_MAX
#define KMB_PWM_EN_BIT BIT(31)
/* Mask */
#define KMB_PWM_HIGH_MASK GENMASK(31, 16)
#define KMB_PWM_LOW_MASK GENMASK(15, 0)
#define KMB_PWM_LEADIN_MASK GENMASK(30, 0)
/* PWM Register offset */
#define KMB_PWM_LEADIN_OFFSET(ch) (0x00 + 4 * (ch))
#define KMB_PWM_HIGHLOW_OFFSET(ch) (0x20 + 4 * (ch))
struct keembay_pwm {
struct pwm_chip chip;
struct device *dev;
struct clk *clk;
void __iomem *base;
};
static inline struct keembay_pwm *to_keembay_pwm_dev(struct pwm_chip *chip)
{
return container_of(chip, struct keembay_pwm, chip);
}
static void keembay_clk_unprepare(void *data)
{
clk_disable_unprepare(data);
}
static int keembay_clk_enable(struct device *dev, struct clk *clk)
{
int ret;
ret = clk_prepare_enable(clk);
if (ret)
return ret;
return devm_add_action_or_reset(dev, keembay_clk_unprepare, clk);
}
/*
* With gcc 10, CONFIG_CC_OPTIMIZE_FOR_SIZE and only "inline" instead of
* "__always_inline" this fails to compile because the compiler doesn't notice
* for all valid masks (e.g. KMB_PWM_LEADIN_MASK) that they are ok.
*/
static __always_inline void keembay_pwm_update_bits(struct keembay_pwm *priv, u32 mask,
u32 val, u32 offset)
{
u32 buff = readl(priv->base + offset);
buff = u32_replace_bits(buff, val, mask);
writel(buff, priv->base + offset);
}
static void keembay_pwm_enable(struct keembay_pwm *priv, int ch)
{
keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 1,
KMB_PWM_LEADIN_OFFSET(ch));
}
static void keembay_pwm_disable(struct keembay_pwm *priv, int ch)
{
keembay_pwm_update_bits(priv, KMB_PWM_EN_BIT, 0,
KMB_PWM_LEADIN_OFFSET(ch));
}
static void keembay_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
unsigned long long high, low;
unsigned long clk_rate;
u32 highlow;
clk_rate = clk_get_rate(priv->clk);
/* Read channel enabled status */
highlow = readl(priv->base + KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
if (highlow & KMB_PWM_EN_BIT)
state->enabled = true;
else
state->enabled = false;
/* Read period and duty cycle */
highlow = readl(priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
low = FIELD_GET(KMB_PWM_LOW_MASK, highlow) * NSEC_PER_SEC;
high = FIELD_GET(KMB_PWM_HIGH_MASK, highlow) * NSEC_PER_SEC;
state->duty_cycle = DIV_ROUND_UP_ULL(high, clk_rate);
state->period = DIV_ROUND_UP_ULL(high + low, clk_rate);
state->polarity = PWM_POLARITY_NORMAL;
}
static int keembay_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct keembay_pwm *priv = to_keembay_pwm_dev(chip);
struct pwm_state current_state;
unsigned long long div;
unsigned long clk_rate;
u32 pwm_count = 0;
u16 high, low;
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
/*
* Configure the pwm repeat count as infinite at (15:0) and leadin
* low time as 0 at (30:16), which is in terms of clock cycles.
*/
keembay_pwm_update_bits(priv, KMB_PWM_LEADIN_MASK, 0,
KMB_PWM_LEADIN_OFFSET(pwm->hwpwm));
keembay_pwm_get_state(chip, pwm, &current_state);
if (!state->enabled) {
if (current_state.enabled)
keembay_pwm_disable(priv, pwm->hwpwm);
return 0;
}
/*
* The upper 16 bits and lower 16 bits of the KMB_PWM_HIGHLOW_OFFSET
* register contain the high time and low time of waveform accordingly.
* All the values are in terms of clock cycles.
*/
clk_rate = clk_get_rate(priv->clk);
div = clk_rate * state->duty_cycle;
div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
if (div > KMB_PWM_COUNT_MAX)
return -ERANGE;
high = div;
div = clk_rate * state->period;
div = DIV_ROUND_DOWN_ULL(div, NSEC_PER_SEC);
div = div - high;
if (div > KMB_PWM_COUNT_MAX)
return -ERANGE;
low = div;
pwm_count = FIELD_PREP(KMB_PWM_HIGH_MASK, high) |
FIELD_PREP(KMB_PWM_LOW_MASK, low);
writel(pwm_count, priv->base + KMB_PWM_HIGHLOW_OFFSET(pwm->hwpwm));
if (state->enabled && !current_state.enabled)
keembay_pwm_enable(priv, pwm->hwpwm);
return 0;
}
static const struct pwm_ops keembay_pwm_ops = {
.owner = THIS_MODULE,
.apply = keembay_pwm_apply,
.get_state = keembay_pwm_get_state,
};
static int keembay_pwm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct keembay_pwm *priv;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk))
return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get clock\n");
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
ret = keembay_clk_enable(dev, priv->clk);
if (ret)
return ret;
priv->chip.base = -1;
priv->chip.dev = dev;
priv->chip.ops = &keembay_pwm_ops;
priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
ret = pwmchip_add(&priv->chip);
if (ret)
return dev_err_probe(dev, ret, "Failed to add PWM chip\n");
platform_set_drvdata(pdev, priv);
return 0;
}
static int keembay_pwm_remove(struct platform_device *pdev)
{
struct keembay_pwm *priv = platform_get_drvdata(pdev);
return pwmchip_remove(&priv->chip);
}
static const struct of_device_id keembay_pwm_of_match[] = {
{ .compatible = "intel,keembay-pwm" },
{ }
};
MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
static struct platform_driver keembay_pwm_driver = {
.probe = keembay_pwm_probe,
.remove = keembay_pwm_remove,
.driver = {
.name = "pwm-keembay",
.of_match_table = keembay_pwm_of_match,
},
};
module_platform_driver(keembay_pwm_driver);
MODULE_ALIAS("platform:pwm-keembay");
MODULE_DESCRIPTION("Intel Keem Bay PWM driver");
MODULE_LICENSE("GPL v2");