|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * MFD core driver for Ricoh RN5T618 PMIC | 
|  | * | 
|  | * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> | 
|  | * Copyright (C) 2016 Toradex AG | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/rn5t618.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/regmap.h> | 
|  |  | 
|  | static const struct mfd_cell rn5t618_cells[] = { | 
|  | { .name = "rn5t618-regulator" }, | 
|  | { .name = "rn5t618-wdt" }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell rc5t619_cells[] = { | 
|  | { .name = "rn5t618-adc" }, | 
|  | { .name = "rn5t618-regulator" }, | 
|  | { .name = "rc5t619-rtc" }, | 
|  | { .name = "rn5t618-wdt" }, | 
|  | }; | 
|  |  | 
|  | static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg) | 
|  | { | 
|  | switch (reg) { | 
|  | case RN5T618_WATCHDOGCNT: | 
|  | case RN5T618_DCIRQ: | 
|  | case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL: | 
|  | case RN5T618_ADCCNT3: | 
|  | case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3: | 
|  | case RN5T618_IR_GPR: | 
|  | case RN5T618_IR_GPF: | 
|  | case RN5T618_MON_IOIN: | 
|  | case RN5T618_INTMON: | 
|  | case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2: | 
|  | case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct regmap_config rn5t618_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .volatile_reg	= rn5t618_volatile_reg, | 
|  | .max_register	= RN5T618_MAX_REG, | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq rc5t619_irqs[] = { | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)), | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)), | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)), | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)), | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)), | 
|  | REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip rc5t619_irq_chip = { | 
|  | .name = "rc5t619", | 
|  | .irqs = rc5t619_irqs, | 
|  | .num_irqs = ARRAY_SIZE(rc5t619_irqs), | 
|  | .num_regs = 1, | 
|  | .status_base = RN5T618_INTMON, | 
|  | .mask_base = RN5T618_INTEN, | 
|  | .mask_invert = true, | 
|  | }; | 
|  |  | 
|  | static struct rn5t618 *rn5t618_pm_power_off; | 
|  | static struct notifier_block rn5t618_restart_handler; | 
|  |  | 
|  | static int rn5t618_irq_init(struct rn5t618 *rn5t618) | 
|  | { | 
|  | const struct regmap_irq_chip *irq_chip = NULL; | 
|  | int ret; | 
|  |  | 
|  | if (!rn5t618->irq) | 
|  | return 0; | 
|  |  | 
|  | switch (rn5t618->variant) { | 
|  | case RC5T619: | 
|  | irq_chip = &rc5t619_irq_chip; | 
|  | break; | 
|  | default: | 
|  | dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n", | 
|  | (int)rn5t618->variant); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap, | 
|  | rn5t618->irq, | 
|  | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, | 
|  | 0, irq_chip, &rn5t618->irq_data); | 
|  | if (ret) | 
|  | dev_err(rn5t618->dev, "Failed to register IRQ chip\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void rn5t618_trigger_poweroff_sequence(bool repower) | 
|  | { | 
|  | /* disable automatic repower-on */ | 
|  | regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, | 
|  | RN5T618_REPCNT_REPWRON, | 
|  | repower ? RN5T618_REPCNT_REPWRON : 0); | 
|  | /* start power-off sequence */ | 
|  | regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, | 
|  | RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); | 
|  | } | 
|  |  | 
|  | static void rn5t618_power_off(void) | 
|  | { | 
|  | rn5t618_trigger_poweroff_sequence(false); | 
|  | } | 
|  |  | 
|  | static int rn5t618_restart(struct notifier_block *this, | 
|  | unsigned long mode, void *cmd) | 
|  | { | 
|  | rn5t618_trigger_poweroff_sequence(true); | 
|  |  | 
|  | /* | 
|  | * Re-power factor detection on PMIC side is not instant. 1ms | 
|  | * proved to be enough time until reset takes effect. | 
|  | */ | 
|  | mdelay(1); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id rn5t618_of_match[] = { | 
|  | { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 }, | 
|  | { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 }, | 
|  | { .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, rn5t618_of_match); | 
|  |  | 
|  | static int rn5t618_i2c_probe(struct i2c_client *i2c) | 
|  | { | 
|  | const struct of_device_id *of_id; | 
|  | struct rn5t618 *priv; | 
|  | int ret; | 
|  |  | 
|  | of_id = of_match_device(rn5t618_of_match, &i2c->dev); | 
|  | if (!of_id) { | 
|  | dev_err(&i2c->dev, "Failed to find matching DT ID\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(i2c, priv); | 
|  | priv->variant = (long)of_id->data; | 
|  | priv->irq = i2c->irq; | 
|  | priv->dev = &i2c->dev; | 
|  |  | 
|  | priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config); | 
|  | if (IS_ERR(priv->regmap)) { | 
|  | ret = PTR_ERR(priv->regmap); | 
|  | dev_err(&i2c->dev, "regmap init failed: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (priv->variant == RC5T619) | 
|  | ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, | 
|  | rc5t619_cells, | 
|  | ARRAY_SIZE(rc5t619_cells), | 
|  | NULL, 0, NULL); | 
|  | else | 
|  | ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, | 
|  | rn5t618_cells, | 
|  | ARRAY_SIZE(rn5t618_cells), | 
|  | NULL, 0, NULL); | 
|  | if (ret) { | 
|  | dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | rn5t618_pm_power_off = priv; | 
|  | if (of_device_is_system_power_controller(i2c->dev.of_node)) { | 
|  | if (!pm_power_off) | 
|  | pm_power_off = rn5t618_power_off; | 
|  | else | 
|  | dev_warn(&i2c->dev, "Poweroff callback already assigned\n"); | 
|  | } | 
|  |  | 
|  | rn5t618_restart_handler.notifier_call = rn5t618_restart; | 
|  | rn5t618_restart_handler.priority = 192; | 
|  |  | 
|  | ret = register_restart_handler(&rn5t618_restart_handler); | 
|  | if (ret) { | 
|  | dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return rn5t618_irq_init(priv); | 
|  | } | 
|  |  | 
|  | static int rn5t618_i2c_remove(struct i2c_client *i2c) | 
|  | { | 
|  | struct rn5t618 *priv = i2c_get_clientdata(i2c); | 
|  |  | 
|  | if (priv == rn5t618_pm_power_off) { | 
|  | rn5t618_pm_power_off = NULL; | 
|  | pm_power_off = NULL; | 
|  | } | 
|  |  | 
|  | unregister_restart_handler(&rn5t618_restart_handler); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused rn5t618_i2c_suspend(struct device *dev) | 
|  | { | 
|  | struct rn5t618 *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | if (priv->irq) | 
|  | disable_irq(priv->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused rn5t618_i2c_resume(struct device *dev) | 
|  | { | 
|  | struct rn5t618 *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | if (priv->irq) | 
|  | enable_irq(priv->irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops, | 
|  | rn5t618_i2c_suspend, | 
|  | rn5t618_i2c_resume); | 
|  |  | 
|  | static struct i2c_driver rn5t618_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "rn5t618", | 
|  | .of_match_table = of_match_ptr(rn5t618_of_match), | 
|  | .pm = &rn5t618_i2c_dev_pm_ops, | 
|  | }, | 
|  | .probe_new = rn5t618_i2c_probe, | 
|  | .remove = rn5t618_i2c_remove, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(rn5t618_i2c_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>"); | 
|  | MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver"); | 
|  | MODULE_LICENSE("GPL v2"); |