| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  *  Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net) | 
 |  */ | 
 |  | 
 | #include <linux/signal.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/module.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/mii.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/uaccess.h> | 
 |  | 
 | /* Version Information */ | 
 | #define DRIVER_VERSION "v0.6.2 (2004/08/27)" | 
 | #define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>" | 
 | #define DRIVER_DESC "rtl8150 based usb-ethernet driver" | 
 |  | 
 | #define	IDR			0x0120 | 
 | #define	MAR			0x0126 | 
 | #define	CR			0x012e | 
 | #define	TCR			0x012f | 
 | #define	RCR			0x0130 | 
 | #define	TSR			0x0132 | 
 | #define	RSR			0x0133 | 
 | #define	CON0			0x0135 | 
 | #define	CON1			0x0136 | 
 | #define	MSR			0x0137 | 
 | #define	PHYADD			0x0138 | 
 | #define	PHYDAT			0x0139 | 
 | #define	PHYCNT			0x013b | 
 | #define	GPPC			0x013d | 
 | #define	BMCR			0x0140 | 
 | #define	BMSR			0x0142 | 
 | #define	ANAR			0x0144 | 
 | #define	ANLP			0x0146 | 
 | #define	AER			0x0148 | 
 | #define CSCR			0x014C  /* This one has the link status */ | 
 | #define CSCR_LINK_STATUS	(1 << 3) | 
 |  | 
 | #define	IDR_EEPROM		0x1202 | 
 |  | 
 | #define	PHY_READ		0 | 
 | #define	PHY_WRITE		0x20 | 
 | #define	PHY_GO			0x40 | 
 |  | 
 | #define	MII_TIMEOUT		10 | 
 | #define	INTBUFSIZE		8 | 
 |  | 
 | #define	RTL8150_REQT_READ	0xc0 | 
 | #define	RTL8150_REQT_WRITE	0x40 | 
 | #define	RTL8150_REQ_GET_REGS	0x05 | 
 | #define	RTL8150_REQ_SET_REGS	0x05 | 
 |  | 
 |  | 
 | /* Transmit status register errors */ | 
 | #define TSR_ECOL		(1<<5) | 
 | #define TSR_LCOL		(1<<4) | 
 | #define TSR_LOSS_CRS		(1<<3) | 
 | #define TSR_JBR			(1<<2) | 
 | #define TSR_ERRORS		(TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR) | 
 | /* Receive status register errors */ | 
 | #define RSR_CRC			(1<<2) | 
 | #define RSR_FAE			(1<<1) | 
 | #define RSR_ERRORS		(RSR_CRC | RSR_FAE) | 
 |  | 
 | /* Media status register definitions */ | 
 | #define MSR_DUPLEX		(1<<4) | 
 | #define MSR_SPEED		(1<<3) | 
 | #define MSR_LINK		(1<<2) | 
 |  | 
 | /* Interrupt pipe data */ | 
 | #define INT_TSR			0x00 | 
 | #define INT_RSR			0x01 | 
 | #define INT_MSR			0x02 | 
 | #define INT_WAKSR		0x03 | 
 | #define INT_TXOK_CNT		0x04 | 
 | #define INT_RXLOST_CNT		0x05 | 
 | #define INT_CRERR_CNT		0x06 | 
 | #define INT_COL_CNT		0x07 | 
 |  | 
 |  | 
 | #define	RTL8150_MTU		1540 | 
 | #define	RTL8150_TX_TIMEOUT	(HZ) | 
 | #define	RX_SKB_POOL_SIZE	4 | 
 |  | 
 | /* rtl8150 flags */ | 
 | #define	RTL8150_HW_CRC		0 | 
 | #define	RX_REG_SET		1 | 
 | #define	RTL8150_UNPLUG		2 | 
 | #define	RX_URB_FAIL		3 | 
 |  | 
 | /* Define these values to match your device */ | 
 | #define	VENDOR_ID_REALTEK		0x0bda | 
 | #define	VENDOR_ID_MELCO			0x0411 | 
 | #define	VENDOR_ID_MICRONET		0x3980 | 
 | #define	VENDOR_ID_LONGSHINE		0x07b8 | 
 | #define	VENDOR_ID_OQO			0x1557 | 
 | #define	VENDOR_ID_ZYXEL			0x0586 | 
 |  | 
 | #define PRODUCT_ID_RTL8150		0x8150 | 
 | #define	PRODUCT_ID_LUAKTX		0x0012 | 
 | #define	PRODUCT_ID_LCS8138TX		0x401a | 
 | #define PRODUCT_ID_SP128AR		0x0003 | 
 | #define	PRODUCT_ID_PRESTIGE		0x401a | 
 |  | 
 | #undef	EEPROM_WRITE | 
 |  | 
 | /* table of devices that work with this driver */ | 
 | static const struct usb_device_id rtl8150_table[] = { | 
 | 	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)}, | 
 | 	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)}, | 
 | 	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)}, | 
 | 	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)}, | 
 | 	{USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)}, | 
 | 	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)}, | 
 | 	{} | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(usb, rtl8150_table); | 
 |  | 
 | struct rtl8150 { | 
 | 	unsigned long flags; | 
 | 	struct usb_device *udev; | 
 | 	struct tasklet_struct tl; | 
 | 	struct net_device *netdev; | 
 | 	struct urb *rx_urb, *tx_urb, *intr_urb; | 
 | 	struct sk_buff *tx_skb, *rx_skb; | 
 | 	struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE]; | 
 | 	spinlock_t rx_pool_lock; | 
 | 	struct usb_ctrlrequest dr; | 
 | 	int intr_interval; | 
 | 	u8 *intr_buff; | 
 | 	u8 phy; | 
 | }; | 
 |  | 
 | typedef struct rtl8150 rtl8150_t; | 
 |  | 
 | struct async_req { | 
 | 	struct usb_ctrlrequest dr; | 
 | 	u16 rx_creg; | 
 | }; | 
 |  | 
 | static const char driver_name [] = "rtl8150"; | 
 |  | 
 | /* | 
 | ** | 
 | **	device related part of the code | 
 | ** | 
 | */ | 
 | static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data) | 
 | { | 
 | 	return usb_control_msg_recv(dev->udev, 0, RTL8150_REQ_GET_REGS, | 
 | 				    RTL8150_REQT_READ, indx, 0, data, size, | 
 | 				    1000, GFP_NOIO); | 
 | } | 
 |  | 
 | static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data) | 
 | { | 
 | 	return usb_control_msg_send(dev->udev, 0, RTL8150_REQ_SET_REGS, | 
 | 				    RTL8150_REQT_WRITE, indx, 0, data, size, | 
 | 				    1000, GFP_NOIO); | 
 | } | 
 |  | 
 | static void async_set_reg_cb(struct urb *urb) | 
 | { | 
 | 	struct async_req *req = (struct async_req *)urb->context; | 
 | 	int status = urb->status; | 
 |  | 
 | 	if (status < 0) | 
 | 		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status); | 
 | 	kfree(req); | 
 | 	usb_free_urb(urb); | 
 | } | 
 |  | 
 | static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg) | 
 | { | 
 | 	int res = -ENOMEM; | 
 | 	struct urb *async_urb; | 
 | 	struct async_req *req; | 
 |  | 
 | 	req = kmalloc(sizeof(struct async_req), GFP_ATOMIC); | 
 | 	if (req == NULL) | 
 | 		return res; | 
 | 	async_urb = usb_alloc_urb(0, GFP_ATOMIC); | 
 | 	if (async_urb == NULL) { | 
 | 		kfree(req); | 
 | 		return res; | 
 | 	} | 
 | 	req->rx_creg = cpu_to_le16(reg); | 
 | 	req->dr.bRequestType = RTL8150_REQT_WRITE; | 
 | 	req->dr.bRequest = RTL8150_REQ_SET_REGS; | 
 | 	req->dr.wIndex = 0; | 
 | 	req->dr.wValue = cpu_to_le16(indx); | 
 | 	req->dr.wLength = cpu_to_le16(size); | 
 | 	usb_fill_control_urb(async_urb, dev->udev, | 
 | 	                     usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr, | 
 | 			     &req->rx_creg, size, async_set_reg_cb, req); | 
 | 	res = usb_submit_urb(async_urb, GFP_ATOMIC); | 
 | 	if (res) { | 
 | 		if (res == -ENODEV) | 
 | 			netif_device_detach(dev->netdev); | 
 | 		dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res); | 
 | 	} | 
 | 	return res; | 
 | } | 
 |  | 
 | static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg) | 
 | { | 
 | 	int i; | 
 | 	u8 data[3], tmp; | 
 |  | 
 | 	data[0] = phy; | 
 | 	data[1] = data[2] = 0; | 
 | 	tmp = indx | PHY_READ | PHY_GO; | 
 | 	i = 0; | 
 |  | 
 | 	set_registers(dev, PHYADD, sizeof(data), data); | 
 | 	set_registers(dev, PHYCNT, 1, &tmp); | 
 | 	do { | 
 | 		get_registers(dev, PHYCNT, 1, data); | 
 | 	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); | 
 |  | 
 | 	if (i <= MII_TIMEOUT) { | 
 | 		get_registers(dev, PHYDAT, 2, data); | 
 | 		*reg = data[0] | (data[1] << 8); | 
 | 		return 0; | 
 | 	} else | 
 | 		return 1; | 
 | } | 
 |  | 
 | static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg) | 
 | { | 
 | 	int i; | 
 | 	u8 data[3], tmp; | 
 |  | 
 | 	data[0] = phy; | 
 | 	data[1] = reg & 0xff; | 
 | 	data[2] = (reg >> 8) & 0xff; | 
 | 	tmp = indx | PHY_WRITE | PHY_GO; | 
 | 	i = 0; | 
 |  | 
 | 	set_registers(dev, PHYADD, sizeof(data), data); | 
 | 	set_registers(dev, PHYCNT, 1, &tmp); | 
 | 	do { | 
 | 		get_registers(dev, PHYCNT, 1, data); | 
 | 	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT)); | 
 |  | 
 | 	if (i <= MII_TIMEOUT) | 
 | 		return 0; | 
 | 	else | 
 | 		return 1; | 
 | } | 
 |  | 
 | static void set_ethernet_addr(rtl8150_t *dev) | 
 | { | 
 | 	u8 node_id[ETH_ALEN]; | 
 | 	int ret; | 
 |  | 
 | 	ret = get_registers(dev, IDR, sizeof(node_id), node_id); | 
 |  | 
 | 	if (!ret) { | 
 | 		eth_hw_addr_set(dev->netdev, node_id); | 
 | 	} else { | 
 | 		eth_hw_addr_random(dev->netdev); | 
 | 		netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n", | 
 | 			      dev->netdev->dev_addr); | 
 | 	} | 
 | } | 
 |  | 
 | static int rtl8150_set_mac_address(struct net_device *netdev, void *p) | 
 | { | 
 | 	struct sockaddr *addr = p; | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 |  | 
 | 	if (netif_running(netdev)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	eth_hw_addr_set(netdev, addr->sa_data); | 
 | 	netdev_dbg(netdev, "Setting MAC address to %pM\n", netdev->dev_addr); | 
 | 	/* Set the IDR registers. */ | 
 | 	set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr); | 
 | #ifdef EEPROM_WRITE | 
 | 	{ | 
 | 	int i; | 
 | 	u8 cr; | 
 | 	/* Get the CR contents. */ | 
 | 	get_registers(dev, CR, 1, &cr); | 
 | 	/* Set the WEPROM bit (eeprom write enable). */ | 
 | 	cr |= 0x20; | 
 | 	set_registers(dev, CR, 1, &cr); | 
 | 	/* Write the MAC address into eeprom. Eeprom writes must be word-sized, | 
 | 	   so we need to split them up. */ | 
 | 	for (i = 0; i * 2 < netdev->addr_len; i++) { | 
 | 		set_registers(dev, IDR_EEPROM + (i * 2), 2, | 
 | 		netdev->dev_addr + (i * 2)); | 
 | 	} | 
 | 	/* Clear the WEPROM bit (preventing accidental eeprom writes). */ | 
 | 	cr &= 0xdf; | 
 | 	set_registers(dev, CR, 1, &cr); | 
 | 	} | 
 | #endif | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int rtl8150_reset(rtl8150_t * dev) | 
 | { | 
 | 	u8 data = 0x10; | 
 | 	int i = HZ; | 
 |  | 
 | 	set_registers(dev, CR, 1, &data); | 
 | 	do { | 
 | 		get_registers(dev, CR, 1, &data); | 
 | 	} while ((data & 0x10) && --i); | 
 |  | 
 | 	return (i > 0) ? 1 : 0; | 
 | } | 
 |  | 
 | static int alloc_all_urbs(rtl8150_t * dev) | 
 | { | 
 | 	dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!dev->rx_urb) | 
 | 		return 0; | 
 | 	dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!dev->tx_urb) { | 
 | 		usb_free_urb(dev->rx_urb); | 
 | 		return 0; | 
 | 	} | 
 | 	dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 	if (!dev->intr_urb) { | 
 | 		usb_free_urb(dev->rx_urb); | 
 | 		usb_free_urb(dev->tx_urb); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static void free_all_urbs(rtl8150_t * dev) | 
 | { | 
 | 	usb_free_urb(dev->rx_urb); | 
 | 	usb_free_urb(dev->tx_urb); | 
 | 	usb_free_urb(dev->intr_urb); | 
 | } | 
 |  | 
 | static void unlink_all_urbs(rtl8150_t * dev) | 
 | { | 
 | 	usb_kill_urb(dev->rx_urb); | 
 | 	usb_kill_urb(dev->tx_urb); | 
 | 	usb_kill_urb(dev->intr_urb); | 
 | } | 
 |  | 
 | static inline struct sk_buff *pull_skb(rtl8150_t *dev) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < RX_SKB_POOL_SIZE; i++) { | 
 | 		if (dev->rx_skb_pool[i]) { | 
 | 			skb = dev->rx_skb_pool[i]; | 
 | 			dev->rx_skb_pool[i] = NULL; | 
 | 			return skb; | 
 | 		} | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void read_bulk_callback(struct urb *urb) | 
 | { | 
 | 	rtl8150_t *dev; | 
 | 	unsigned pkt_len, res; | 
 | 	struct sk_buff *skb; | 
 | 	struct net_device *netdev; | 
 | 	int status = urb->status; | 
 | 	int result; | 
 | 	unsigned long flags; | 
 |  | 
 | 	dev = urb->context; | 
 | 	if (!dev) | 
 | 		return; | 
 | 	if (test_bit(RTL8150_UNPLUG, &dev->flags)) | 
 | 		return; | 
 | 	netdev = dev->netdev; | 
 | 	if (!netif_device_present(netdev)) | 
 | 		return; | 
 |  | 
 | 	switch (status) { | 
 | 	case 0: | 
 | 		break; | 
 | 	case -ENOENT: | 
 | 		return;	/* the urb is in unlink state */ | 
 | 	case -ETIME: | 
 | 		if (printk_ratelimit()) | 
 | 			dev_warn(&urb->dev->dev, "may be reset is needed?..\n"); | 
 | 		goto goon; | 
 | 	default: | 
 | 		if (printk_ratelimit()) | 
 | 			dev_warn(&urb->dev->dev, "Rx status %d\n", status); | 
 | 		goto goon; | 
 | 	} | 
 |  | 
 | 	if (!dev->rx_skb) | 
 | 		goto resched; | 
 | 	/* protect against short packets (tell me why we got some?!?) */ | 
 | 	if (urb->actual_length < 4) | 
 | 		goto goon; | 
 |  | 
 | 	res = urb->actual_length; | 
 | 	pkt_len = res - 4; | 
 |  | 
 | 	skb_put(dev->rx_skb, pkt_len); | 
 | 	dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev); | 
 | 	netif_rx(dev->rx_skb); | 
 | 	netdev->stats.rx_packets++; | 
 | 	netdev->stats.rx_bytes += pkt_len; | 
 |  | 
 | 	spin_lock_irqsave(&dev->rx_pool_lock, flags); | 
 | 	skb = pull_skb(dev); | 
 | 	spin_unlock_irqrestore(&dev->rx_pool_lock, flags); | 
 | 	if (!skb) | 
 | 		goto resched; | 
 |  | 
 | 	dev->rx_skb = skb; | 
 | goon: | 
 | 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), | 
 | 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); | 
 | 	result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); | 
 | 	if (result == -ENODEV) | 
 | 		netif_device_detach(dev->netdev); | 
 | 	else if (result) { | 
 | 		set_bit(RX_URB_FAIL, &dev->flags); | 
 | 		goto resched; | 
 | 	} else { | 
 | 		clear_bit(RX_URB_FAIL, &dev->flags); | 
 | 	} | 
 |  | 
 | 	return; | 
 | resched: | 
 | 	tasklet_schedule(&dev->tl); | 
 | } | 
 |  | 
 | static void write_bulk_callback(struct urb *urb) | 
 | { | 
 | 	rtl8150_t *dev; | 
 | 	int status = urb->status; | 
 |  | 
 | 	dev = urb->context; | 
 | 	if (!dev) | 
 | 		return; | 
 | 	dev_kfree_skb_irq(dev->tx_skb); | 
 | 	if (!netif_device_present(dev->netdev)) | 
 | 		return; | 
 | 	if (status) | 
 | 		dev_info(&urb->dev->dev, "%s: Tx status %d\n", | 
 | 			 dev->netdev->name, status); | 
 | 	netif_trans_update(dev->netdev); | 
 | 	netif_wake_queue(dev->netdev); | 
 | } | 
 |  | 
 | static void intr_callback(struct urb *urb) | 
 | { | 
 | 	rtl8150_t *dev; | 
 | 	__u8 *d; | 
 | 	int status = urb->status; | 
 | 	int res; | 
 |  | 
 | 	dev = urb->context; | 
 | 	if (!dev) | 
 | 		return; | 
 | 	switch (status) { | 
 | 	case 0:			/* success */ | 
 | 		break; | 
 | 	case -ECONNRESET:	/* unlink */ | 
 | 	case -ENOENT: | 
 | 	case -ESHUTDOWN: | 
 | 		return; | 
 | 	/* -EPIPE:  should clear the halt */ | 
 | 	default: | 
 | 		dev_info(&urb->dev->dev, "%s: intr status %d\n", | 
 | 			 dev->netdev->name, status); | 
 | 		goto resubmit; | 
 | 	} | 
 |  | 
 | 	d = urb->transfer_buffer; | 
 | 	if (d[0] & TSR_ERRORS) { | 
 | 		dev->netdev->stats.tx_errors++; | 
 | 		if (d[INT_TSR] & (TSR_ECOL | TSR_JBR)) | 
 | 			dev->netdev->stats.tx_aborted_errors++; | 
 | 		if (d[INT_TSR] & TSR_LCOL) | 
 | 			dev->netdev->stats.tx_window_errors++; | 
 | 		if (d[INT_TSR] & TSR_LOSS_CRS) | 
 | 			dev->netdev->stats.tx_carrier_errors++; | 
 | 	} | 
 | 	/* Report link status changes to the network stack */ | 
 | 	if ((d[INT_MSR] & MSR_LINK) == 0) { | 
 | 		if (netif_carrier_ok(dev->netdev)) { | 
 | 			netif_carrier_off(dev->netdev); | 
 | 			netdev_dbg(dev->netdev, "%s: LINK LOST\n", __func__); | 
 | 		} | 
 | 	} else { | 
 | 		if (!netif_carrier_ok(dev->netdev)) { | 
 | 			netif_carrier_on(dev->netdev); | 
 | 			netdev_dbg(dev->netdev, "%s: LINK CAME BACK\n", __func__); | 
 | 		} | 
 | 	} | 
 |  | 
 | resubmit: | 
 | 	res = usb_submit_urb (urb, GFP_ATOMIC); | 
 | 	if (res == -ENODEV) | 
 | 		netif_device_detach(dev->netdev); | 
 | 	else if (res) | 
 | 		dev_err(&dev->udev->dev, | 
 | 			"can't resubmit intr, %s-%s/input0, status %d\n", | 
 | 			dev->udev->bus->bus_name, dev->udev->devpath, res); | 
 | } | 
 |  | 
 | static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message) | 
 | { | 
 | 	rtl8150_t *dev = usb_get_intfdata(intf); | 
 |  | 
 | 	netif_device_detach(dev->netdev); | 
 |  | 
 | 	if (netif_running(dev->netdev)) { | 
 | 		usb_kill_urb(dev->rx_urb); | 
 | 		usb_kill_urb(dev->intr_urb); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int rtl8150_resume(struct usb_interface *intf) | 
 | { | 
 | 	rtl8150_t *dev = usb_get_intfdata(intf); | 
 |  | 
 | 	netif_device_attach(dev->netdev); | 
 | 	if (netif_running(dev->netdev)) { | 
 | 		dev->rx_urb->status = 0; | 
 | 		dev->rx_urb->actual_length = 0; | 
 | 		read_bulk_callback(dev->rx_urb); | 
 |  | 
 | 		dev->intr_urb->status = 0; | 
 | 		dev->intr_urb->actual_length = 0; | 
 | 		intr_callback(dev->intr_urb); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 | ** | 
 | **	network related part of the code | 
 | ** | 
 | */ | 
 |  | 
 | static void fill_skb_pool(rtl8150_t *dev) | 
 | { | 
 | 	struct sk_buff *skb; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < RX_SKB_POOL_SIZE; i++) { | 
 | 		if (dev->rx_skb_pool[i]) | 
 | 			continue; | 
 | 		skb = dev_alloc_skb(RTL8150_MTU + 2); | 
 | 		if (!skb) { | 
 | 			return; | 
 | 		} | 
 | 		skb_reserve(skb, 2); | 
 | 		dev->rx_skb_pool[i] = skb; | 
 | 	} | 
 | } | 
 |  | 
 | static void free_skb_pool(rtl8150_t *dev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < RX_SKB_POOL_SIZE; i++) | 
 | 		dev_kfree_skb(dev->rx_skb_pool[i]); | 
 | } | 
 |  | 
 | static void rx_fixup(struct tasklet_struct *t) | 
 | { | 
 | 	struct rtl8150 *dev = from_tasklet(dev, t, tl); | 
 | 	struct sk_buff *skb; | 
 | 	int status; | 
 |  | 
 | 	spin_lock_irq(&dev->rx_pool_lock); | 
 | 	fill_skb_pool(dev); | 
 | 	spin_unlock_irq(&dev->rx_pool_lock); | 
 | 	if (test_bit(RX_URB_FAIL, &dev->flags)) | 
 | 		if (dev->rx_skb) | 
 | 			goto try_again; | 
 | 	spin_lock_irq(&dev->rx_pool_lock); | 
 | 	skb = pull_skb(dev); | 
 | 	spin_unlock_irq(&dev->rx_pool_lock); | 
 | 	if (skb == NULL) | 
 | 		goto tlsched; | 
 | 	dev->rx_skb = skb; | 
 | 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), | 
 | 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); | 
 | try_again: | 
 | 	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC); | 
 | 	if (status == -ENODEV) { | 
 | 		netif_device_detach(dev->netdev); | 
 | 	} else if (status) { | 
 | 		set_bit(RX_URB_FAIL, &dev->flags); | 
 | 		goto tlsched; | 
 | 	} else { | 
 | 		clear_bit(RX_URB_FAIL, &dev->flags); | 
 | 	} | 
 |  | 
 | 	return; | 
 | tlsched: | 
 | 	tasklet_schedule(&dev->tl); | 
 | } | 
 |  | 
 | static int enable_net_traffic(rtl8150_t * dev) | 
 | { | 
 | 	u8 cr, tcr, rcr, msr; | 
 |  | 
 | 	if (!rtl8150_reset(dev)) { | 
 | 		dev_warn(&dev->udev->dev, "device reset failed\n"); | 
 | 	} | 
 | 	/* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */ | 
 | 	rcr = 0x9e; | 
 | 	tcr = 0xd8; | 
 | 	cr = 0x0c; | 
 | 	if (!(rcr & 0x80)) | 
 | 		set_bit(RTL8150_HW_CRC, &dev->flags); | 
 | 	set_registers(dev, RCR, 1, &rcr); | 
 | 	set_registers(dev, TCR, 1, &tcr); | 
 | 	set_registers(dev, CR, 1, &cr); | 
 | 	get_registers(dev, MSR, 1, &msr); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void disable_net_traffic(rtl8150_t * dev) | 
 | { | 
 | 	u8 cr; | 
 |  | 
 | 	get_registers(dev, CR, 1, &cr); | 
 | 	cr &= 0xf3; | 
 | 	set_registers(dev, CR, 1, &cr); | 
 | } | 
 |  | 
 | static void rtl8150_tx_timeout(struct net_device *netdev, unsigned int txqueue) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	dev_warn(&netdev->dev, "Tx timeout.\n"); | 
 | 	usb_unlink_urb(dev->tx_urb); | 
 | 	netdev->stats.tx_errors++; | 
 | } | 
 |  | 
 | static void rtl8150_set_multicast(struct net_device *netdev) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	u16 rx_creg = 0x9e; | 
 |  | 
 | 	netif_stop_queue(netdev); | 
 | 	if (netdev->flags & IFF_PROMISC) { | 
 | 		rx_creg |= 0x0001; | 
 | 		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name); | 
 | 	} else if (!netdev_mc_empty(netdev) || | 
 | 		   (netdev->flags & IFF_ALLMULTI)) { | 
 | 		rx_creg &= 0xfffe; | 
 | 		rx_creg |= 0x0002; | 
 | 		dev_dbg(&netdev->dev, "%s: allmulti set\n", netdev->name); | 
 | 	} else { | 
 | 		/* ~RX_MULTICAST, ~RX_PROMISCUOUS */ | 
 | 		rx_creg &= 0x00fc; | 
 | 	} | 
 | 	async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg); | 
 | 	netif_wake_queue(netdev); | 
 | } | 
 |  | 
 | static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb, | 
 | 					    struct net_device *netdev) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	int count, res; | 
 |  | 
 | 	netif_stop_queue(netdev); | 
 | 	count = (skb->len < 60) ? 60 : skb->len; | 
 | 	count = (count & 0x3f) ? count : count + 1; | 
 | 	dev->tx_skb = skb; | 
 | 	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), | 
 | 		      skb->data, count, write_bulk_callback, dev); | 
 | 	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) { | 
 | 		/* Can we get/handle EPIPE here? */ | 
 | 		if (res == -ENODEV) | 
 | 			netif_device_detach(dev->netdev); | 
 | 		else { | 
 | 			dev_warn(&netdev->dev, "failed tx_urb %d\n", res); | 
 | 			netdev->stats.tx_errors++; | 
 | 			netif_start_queue(netdev); | 
 | 		} | 
 | 	} else { | 
 | 		netdev->stats.tx_packets++; | 
 | 		netdev->stats.tx_bytes += skb->len; | 
 | 		netif_trans_update(netdev); | 
 | 	} | 
 |  | 
 | 	return NETDEV_TX_OK; | 
 | } | 
 |  | 
 |  | 
 | static void set_carrier(struct net_device *netdev) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	short tmp; | 
 |  | 
 | 	get_registers(dev, CSCR, 2, &tmp); | 
 | 	if (tmp & CSCR_LINK_STATUS) | 
 | 		netif_carrier_on(netdev); | 
 | 	else | 
 | 		netif_carrier_off(netdev); | 
 | } | 
 |  | 
 | static int rtl8150_open(struct net_device *netdev) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	int res; | 
 |  | 
 | 	if (dev->rx_skb == NULL) | 
 | 		dev->rx_skb = pull_skb(dev); | 
 | 	if (!dev->rx_skb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	set_registers(dev, IDR, 6, netdev->dev_addr); | 
 |  | 
 | 	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1), | 
 | 		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev); | 
 | 	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) { | 
 | 		if (res == -ENODEV) | 
 | 			netif_device_detach(dev->netdev); | 
 | 		dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res); | 
 | 		return res; | 
 | 	} | 
 | 	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3), | 
 | 		     dev->intr_buff, INTBUFSIZE, intr_callback, | 
 | 		     dev, dev->intr_interval); | 
 | 	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) { | 
 | 		if (res == -ENODEV) | 
 | 			netif_device_detach(dev->netdev); | 
 | 		dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res); | 
 | 		usb_kill_urb(dev->rx_urb); | 
 | 		return res; | 
 | 	} | 
 | 	enable_net_traffic(dev); | 
 | 	set_carrier(netdev); | 
 | 	netif_start_queue(netdev); | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static int rtl8150_close(struct net_device *netdev) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 |  | 
 | 	netif_stop_queue(netdev); | 
 | 	if (!test_bit(RTL8150_UNPLUG, &dev->flags)) | 
 | 		disable_net_traffic(dev); | 
 | 	unlink_all_urbs(dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 |  | 
 | 	strlcpy(info->driver, driver_name, sizeof(info->driver)); | 
 | 	strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); | 
 | 	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info)); | 
 | } | 
 |  | 
 | static int rtl8150_get_link_ksettings(struct net_device *netdev, | 
 | 				      struct ethtool_link_ksettings *ecmd) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	short lpa, bmcr; | 
 | 	u32 supported; | 
 |  | 
 | 	supported = (SUPPORTED_10baseT_Half | | 
 | 			  SUPPORTED_10baseT_Full | | 
 | 			  SUPPORTED_100baseT_Half | | 
 | 			  SUPPORTED_100baseT_Full | | 
 | 			  SUPPORTED_Autoneg | | 
 | 			  SUPPORTED_TP | SUPPORTED_MII); | 
 | 	ecmd->base.port = PORT_TP; | 
 | 	ecmd->base.phy_address = dev->phy; | 
 | 	get_registers(dev, BMCR, 2, &bmcr); | 
 | 	get_registers(dev, ANLP, 2, &lpa); | 
 | 	if (bmcr & BMCR_ANENABLE) { | 
 | 		u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ? | 
 | 			     SPEED_100 : SPEED_10); | 
 | 		ecmd->base.speed = speed; | 
 | 		ecmd->base.autoneg = AUTONEG_ENABLE; | 
 | 		if (speed == SPEED_100) | 
 | 			ecmd->base.duplex = (lpa & LPA_100FULL) ? | 
 | 			    DUPLEX_FULL : DUPLEX_HALF; | 
 | 		else | 
 | 			ecmd->base.duplex = (lpa & LPA_10FULL) ? | 
 | 			    DUPLEX_FULL : DUPLEX_HALF; | 
 | 	} else { | 
 | 		ecmd->base.autoneg = AUTONEG_DISABLE; | 
 | 		ecmd->base.speed = ((bmcr & BMCR_SPEED100) ? | 
 | 					     SPEED_100 : SPEED_10); | 
 | 		ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ? | 
 | 		    DUPLEX_FULL : DUPLEX_HALF; | 
 | 	} | 
 |  | 
 | 	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported, | 
 | 						supported); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct ethtool_ops ops = { | 
 | 	.get_drvinfo = rtl8150_get_drvinfo, | 
 | 	.get_link = ethtool_op_get_link, | 
 | 	.get_link_ksettings = rtl8150_get_link_ksettings, | 
 | }; | 
 |  | 
 | static int rtl8150_siocdevprivate(struct net_device *netdev, struct ifreq *rq, | 
 | 				  void __user *udata, int cmd) | 
 | { | 
 | 	rtl8150_t *dev = netdev_priv(netdev); | 
 | 	u16 *data = (u16 *) & rq->ifr_ifru; | 
 | 	int res = 0; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case SIOCDEVPRIVATE: | 
 | 		data[0] = dev->phy; | 
 | 		fallthrough; | 
 | 	case SIOCDEVPRIVATE + 1: | 
 | 		read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]); | 
 | 		break; | 
 | 	case SIOCDEVPRIVATE + 2: | 
 | 		if (!capable(CAP_NET_ADMIN)) | 
 | 			return -EPERM; | 
 | 		write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]); | 
 | 		break; | 
 | 	default: | 
 | 		res = -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | static const struct net_device_ops rtl8150_netdev_ops = { | 
 | 	.ndo_open		= rtl8150_open, | 
 | 	.ndo_stop		= rtl8150_close, | 
 | 	.ndo_siocdevprivate	= rtl8150_siocdevprivate, | 
 | 	.ndo_start_xmit		= rtl8150_start_xmit, | 
 | 	.ndo_tx_timeout		= rtl8150_tx_timeout, | 
 | 	.ndo_set_rx_mode	= rtl8150_set_multicast, | 
 | 	.ndo_set_mac_address	= rtl8150_set_mac_address, | 
 |  | 
 | 	.ndo_validate_addr	= eth_validate_addr, | 
 | }; | 
 |  | 
 | static int rtl8150_probe(struct usb_interface *intf, | 
 | 			 const struct usb_device_id *id) | 
 | { | 
 | 	struct usb_device *udev = interface_to_usbdev(intf); | 
 | 	rtl8150_t *dev; | 
 | 	struct net_device *netdev; | 
 |  | 
 | 	netdev = alloc_etherdev(sizeof(rtl8150_t)); | 
 | 	if (!netdev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dev = netdev_priv(netdev); | 
 |  | 
 | 	dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL); | 
 | 	if (!dev->intr_buff) { | 
 | 		free_netdev(netdev); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	tasklet_setup(&dev->tl, rx_fixup); | 
 | 	spin_lock_init(&dev->rx_pool_lock); | 
 |  | 
 | 	dev->udev = udev; | 
 | 	dev->netdev = netdev; | 
 | 	netdev->netdev_ops = &rtl8150_netdev_ops; | 
 | 	netdev->watchdog_timeo = RTL8150_TX_TIMEOUT; | 
 | 	netdev->ethtool_ops = &ops; | 
 | 	dev->intr_interval = 100;	/* 100ms */ | 
 |  | 
 | 	if (!alloc_all_urbs(dev)) { | 
 | 		dev_err(&intf->dev, "out of memory\n"); | 
 | 		goto out; | 
 | 	} | 
 | 	if (!rtl8150_reset(dev)) { | 
 | 		dev_err(&intf->dev, "couldn't reset the device\n"); | 
 | 		goto out1; | 
 | 	} | 
 | 	fill_skb_pool(dev); | 
 | 	set_ethernet_addr(dev); | 
 |  | 
 | 	usb_set_intfdata(intf, dev); | 
 | 	SET_NETDEV_DEV(netdev, &intf->dev); | 
 | 	if (register_netdev(netdev) != 0) { | 
 | 		dev_err(&intf->dev, "couldn't register the device\n"); | 
 | 		goto out2; | 
 | 	} | 
 |  | 
 | 	dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out2: | 
 | 	usb_set_intfdata(intf, NULL); | 
 | 	free_skb_pool(dev); | 
 | out1: | 
 | 	free_all_urbs(dev); | 
 | out: | 
 | 	kfree(dev->intr_buff); | 
 | 	free_netdev(netdev); | 
 | 	return -EIO; | 
 | } | 
 |  | 
 | static void rtl8150_disconnect(struct usb_interface *intf) | 
 | { | 
 | 	rtl8150_t *dev = usb_get_intfdata(intf); | 
 |  | 
 | 	usb_set_intfdata(intf, NULL); | 
 | 	if (dev) { | 
 | 		set_bit(RTL8150_UNPLUG, &dev->flags); | 
 | 		tasklet_kill(&dev->tl); | 
 | 		unregister_netdev(dev->netdev); | 
 | 		unlink_all_urbs(dev); | 
 | 		free_all_urbs(dev); | 
 | 		free_skb_pool(dev); | 
 | 		dev_kfree_skb(dev->rx_skb); | 
 | 		kfree(dev->intr_buff); | 
 | 		free_netdev(dev->netdev); | 
 | 	} | 
 | } | 
 |  | 
 | static struct usb_driver rtl8150_driver = { | 
 | 	.name		= driver_name, | 
 | 	.probe		= rtl8150_probe, | 
 | 	.disconnect	= rtl8150_disconnect, | 
 | 	.id_table	= rtl8150_table, | 
 | 	.suspend	= rtl8150_suspend, | 
 | 	.resume		= rtl8150_resume, | 
 | 	.disable_hub_initiated_lpm = 1, | 
 | }; | 
 |  | 
 | module_usb_driver(rtl8150_driver); | 
 |  | 
 | MODULE_AUTHOR(DRIVER_AUTHOR); | 
 | MODULE_DESCRIPTION(DRIVER_DESC); | 
 | MODULE_LICENSE("GPL"); |