|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Sony imx412 Camera Sensor Driver | 
|  | * | 
|  | * Copyright (C) 2021 Intel Corporation | 
|  | */ | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | #include <media/v4l2-ctrls.h> | 
|  | #include <media/v4l2-fwnode.h> | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | /* Streaming Mode */ | 
|  | #define IMX412_REG_MODE_SELECT	0x0100 | 
|  | #define IMX412_MODE_STANDBY	0x00 | 
|  | #define IMX412_MODE_STREAMING	0x01 | 
|  |  | 
|  | /* Lines per frame */ | 
|  | #define IMX412_REG_LPFR		0x0340 | 
|  |  | 
|  | /* Chip ID */ | 
|  | #define IMX412_REG_ID		0x0016 | 
|  | #define IMX412_ID		0x577 | 
|  |  | 
|  | /* Exposure control */ | 
|  | #define IMX412_REG_EXPOSURE_CIT	0x0202 | 
|  | #define IMX412_EXPOSURE_MIN	8 | 
|  | #define IMX412_EXPOSURE_OFFSET	22 | 
|  | #define IMX412_EXPOSURE_STEP	1 | 
|  | #define IMX412_EXPOSURE_DEFAULT	0x0648 | 
|  |  | 
|  | /* Analog gain control */ | 
|  | #define IMX412_REG_AGAIN	0x0204 | 
|  | #define IMX412_AGAIN_MIN	0 | 
|  | #define IMX412_AGAIN_MAX	978 | 
|  | #define IMX412_AGAIN_STEP	1 | 
|  | #define IMX412_AGAIN_DEFAULT	0 | 
|  |  | 
|  | /* Group hold register */ | 
|  | #define IMX412_REG_HOLD		0x0104 | 
|  |  | 
|  | /* Input clock rate */ | 
|  | #define IMX412_INCLK_RATE	24000000 | 
|  |  | 
|  | /* CSI2 HW configuration */ | 
|  | #define IMX412_LINK_FREQ	600000000 | 
|  | #define IMX412_NUM_DATA_LANES	4 | 
|  |  | 
|  | #define IMX412_REG_MIN		0x00 | 
|  | #define IMX412_REG_MAX		0xffff | 
|  |  | 
|  | /** | 
|  | * struct imx412_reg - imx412 sensor register | 
|  | * @address: Register address | 
|  | * @val: Register value | 
|  | */ | 
|  | struct imx412_reg { | 
|  | u16 address; | 
|  | u8 val; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct imx412_reg_list - imx412 sensor register list | 
|  | * @num_of_regs: Number of registers in the list | 
|  | * @regs: Pointer to register list | 
|  | */ | 
|  | struct imx412_reg_list { | 
|  | u32 num_of_regs; | 
|  | const struct imx412_reg *regs; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct imx412_mode - imx412 sensor mode structure | 
|  | * @width: Frame width | 
|  | * @height: Frame height | 
|  | * @code: Format code | 
|  | * @hblank: Horizontal blanking in lines | 
|  | * @vblank: Vertical blanking in lines | 
|  | * @vblank_min: Minimum vertical blanking in lines | 
|  | * @vblank_max: Maximum vertical blanking in lines | 
|  | * @pclk: Sensor pixel clock | 
|  | * @link_freq_idx: Link frequency index | 
|  | * @reg_list: Register list for sensor mode | 
|  | */ | 
|  | struct imx412_mode { | 
|  | u32 width; | 
|  | u32 height; | 
|  | u32 code; | 
|  | u32 hblank; | 
|  | u32 vblank; | 
|  | u32 vblank_min; | 
|  | u32 vblank_max; | 
|  | u64 pclk; | 
|  | u32 link_freq_idx; | 
|  | struct imx412_reg_list reg_list; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct imx412 - imx412 sensor device structure | 
|  | * @dev: Pointer to generic device | 
|  | * @client: Pointer to i2c client | 
|  | * @sd: V4L2 sub-device | 
|  | * @pad: Media pad. Only one pad supported | 
|  | * @reset_gpio: Sensor reset gpio | 
|  | * @inclk: Sensor input clock | 
|  | * @ctrl_handler: V4L2 control handler | 
|  | * @link_freq_ctrl: Pointer to link frequency control | 
|  | * @pclk_ctrl: Pointer to pixel clock control | 
|  | * @hblank_ctrl: Pointer to horizontal blanking control | 
|  | * @vblank_ctrl: Pointer to vertical blanking control | 
|  | * @exp_ctrl: Pointer to exposure control | 
|  | * @again_ctrl: Pointer to analog gain control | 
|  | * @vblank: Vertical blanking in lines | 
|  | * @cur_mode: Pointer to current selected sensor mode | 
|  | * @mutex: Mutex for serializing sensor controls | 
|  | * @streaming: Flag indicating streaming state | 
|  | */ | 
|  | struct imx412 { | 
|  | struct device *dev; | 
|  | struct i2c_client *client; | 
|  | struct v4l2_subdev sd; | 
|  | struct media_pad pad; | 
|  | struct gpio_desc *reset_gpio; | 
|  | struct clk *inclk; | 
|  | struct v4l2_ctrl_handler ctrl_handler; | 
|  | struct v4l2_ctrl *link_freq_ctrl; | 
|  | struct v4l2_ctrl *pclk_ctrl; | 
|  | struct v4l2_ctrl *hblank_ctrl; | 
|  | struct v4l2_ctrl *vblank_ctrl; | 
|  | struct { | 
|  | struct v4l2_ctrl *exp_ctrl; | 
|  | struct v4l2_ctrl *again_ctrl; | 
|  | }; | 
|  | u32 vblank; | 
|  | const struct imx412_mode *cur_mode; | 
|  | struct mutex mutex; | 
|  | bool streaming; | 
|  | }; | 
|  |  | 
|  | static const s64 link_freq[] = { | 
|  | IMX412_LINK_FREQ, | 
|  | }; | 
|  |  | 
|  | /* Sensor mode registers */ | 
|  | static const struct imx412_reg mode_4056x3040_regs[] = { | 
|  | {0x0136, 0x18}, | 
|  | {0x0137, 0x00}, | 
|  | {0x3c7e, 0x08}, | 
|  | {0x3c7f, 0x02}, | 
|  | {0x38a8, 0x1f}, | 
|  | {0x38a9, 0xff}, | 
|  | {0x38aa, 0x1f}, | 
|  | {0x38ab, 0xff}, | 
|  | {0x55d4, 0x00}, | 
|  | {0x55d5, 0x00}, | 
|  | {0x55d6, 0x07}, | 
|  | {0x55d7, 0xff}, | 
|  | {0x55e8, 0x07}, | 
|  | {0x55e9, 0xff}, | 
|  | {0x55ea, 0x00}, | 
|  | {0x55eb, 0x00}, | 
|  | {0x575c, 0x07}, | 
|  | {0x575d, 0xff}, | 
|  | {0x575e, 0x00}, | 
|  | {0x575f, 0x00}, | 
|  | {0x5764, 0x00}, | 
|  | {0x5765, 0x00}, | 
|  | {0x5766, 0x07}, | 
|  | {0x5767, 0xff}, | 
|  | {0x5974, 0x04}, | 
|  | {0x5975, 0x01}, | 
|  | {0x5f10, 0x09}, | 
|  | {0x5f11, 0x92}, | 
|  | {0x5f12, 0x32}, | 
|  | {0x5f13, 0x72}, | 
|  | {0x5f14, 0x16}, | 
|  | {0x5f15, 0xba}, | 
|  | {0x5f17, 0x13}, | 
|  | {0x5f18, 0x24}, | 
|  | {0x5f19, 0x60}, | 
|  | {0x5f1a, 0xe3}, | 
|  | {0x5f1b, 0xad}, | 
|  | {0x5f1c, 0x74}, | 
|  | {0x5f2d, 0x25}, | 
|  | {0x5f5c, 0xd0}, | 
|  | {0x6a22, 0x00}, | 
|  | {0x6a23, 0x1d}, | 
|  | {0x7ba8, 0x00}, | 
|  | {0x7ba9, 0x00}, | 
|  | {0x886b, 0x00}, | 
|  | {0x9002, 0x0a}, | 
|  | {0x9004, 0x1a}, | 
|  | {0x9214, 0x93}, | 
|  | {0x9215, 0x69}, | 
|  | {0x9216, 0x93}, | 
|  | {0x9217, 0x6b}, | 
|  | {0x9218, 0x93}, | 
|  | {0x9219, 0x6d}, | 
|  | {0x921a, 0x57}, | 
|  | {0x921b, 0x58}, | 
|  | {0x921c, 0x57}, | 
|  | {0x921d, 0x59}, | 
|  | {0x921e, 0x57}, | 
|  | {0x921f, 0x5a}, | 
|  | {0x9220, 0x57}, | 
|  | {0x9221, 0x5b}, | 
|  | {0x9222, 0x93}, | 
|  | {0x9223, 0x02}, | 
|  | {0x9224, 0x93}, | 
|  | {0x9225, 0x03}, | 
|  | {0x9226, 0x93}, | 
|  | {0x9227, 0x04}, | 
|  | {0x9228, 0x93}, | 
|  | {0x9229, 0x05}, | 
|  | {0x922a, 0x98}, | 
|  | {0x922b, 0x21}, | 
|  | {0x922c, 0xb2}, | 
|  | {0x922d, 0xdb}, | 
|  | {0x922e, 0xb2}, | 
|  | {0x922f, 0xdc}, | 
|  | {0x9230, 0xb2}, | 
|  | {0x9231, 0xdd}, | 
|  | {0x9232, 0xe2}, | 
|  | {0x9233, 0xe1}, | 
|  | {0x9234, 0xb2}, | 
|  | {0x9235, 0xe2}, | 
|  | {0x9236, 0xb2}, | 
|  | {0x9237, 0xe3}, | 
|  | {0x9238, 0xb7}, | 
|  | {0x9239, 0xb9}, | 
|  | {0x923a, 0xb7}, | 
|  | {0x923b, 0xbb}, | 
|  | {0x923c, 0xb7}, | 
|  | {0x923d, 0xbc}, | 
|  | {0x923e, 0xb7}, | 
|  | {0x923f, 0xc5}, | 
|  | {0x9240, 0xb7}, | 
|  | {0x9241, 0xc7}, | 
|  | {0x9242, 0xb7}, | 
|  | {0x9243, 0xc9}, | 
|  | {0x9244, 0x98}, | 
|  | {0x9245, 0x56}, | 
|  | {0x9246, 0x98}, | 
|  | {0x9247, 0x55}, | 
|  | {0x9380, 0x00}, | 
|  | {0x9381, 0x62}, | 
|  | {0x9382, 0x00}, | 
|  | {0x9383, 0x56}, | 
|  | {0x9384, 0x00}, | 
|  | {0x9385, 0x52}, | 
|  | {0x9388, 0x00}, | 
|  | {0x9389, 0x55}, | 
|  | {0x938a, 0x00}, | 
|  | {0x938b, 0x55}, | 
|  | {0x938c, 0x00}, | 
|  | {0x938d, 0x41}, | 
|  | {0x5078, 0x01}, | 
|  | {0x0112, 0x0a}, | 
|  | {0x0113, 0x0a}, | 
|  | {0x0114, 0x03}, | 
|  | {0x0342, 0x11}, | 
|  | {0x0343, 0xa0}, | 
|  | {0x0340, 0x0d}, | 
|  | {0x0341, 0xda}, | 
|  | {0x3210, 0x00}, | 
|  | {0x0344, 0x00}, | 
|  | {0x0345, 0x00}, | 
|  | {0x0346, 0x00}, | 
|  | {0x0347, 0x00}, | 
|  | {0x0348, 0x0f}, | 
|  | {0x0349, 0xd7}, | 
|  | {0x034a, 0x0b}, | 
|  | {0x034b, 0xdf}, | 
|  | {0x00e3, 0x00}, | 
|  | {0x00e4, 0x00}, | 
|  | {0x00e5, 0x01}, | 
|  | {0x00fc, 0x0a}, | 
|  | {0x00fd, 0x0a}, | 
|  | {0x00fe, 0x0a}, | 
|  | {0x00ff, 0x0a}, | 
|  | {0xe013, 0x00}, | 
|  | {0x0220, 0x00}, | 
|  | {0x0221, 0x11}, | 
|  | {0x0381, 0x01}, | 
|  | {0x0383, 0x01}, | 
|  | {0x0385, 0x01}, | 
|  | {0x0387, 0x01}, | 
|  | {0x0900, 0x00}, | 
|  | {0x0901, 0x11}, | 
|  | {0x0902, 0x00}, | 
|  | {0x3140, 0x02}, | 
|  | {0x3241, 0x11}, | 
|  | {0x3250, 0x03}, | 
|  | {0x3e10, 0x00}, | 
|  | {0x3e11, 0x00}, | 
|  | {0x3f0d, 0x00}, | 
|  | {0x3f42, 0x00}, | 
|  | {0x3f43, 0x00}, | 
|  | {0x0401, 0x00}, | 
|  | {0x0404, 0x00}, | 
|  | {0x0405, 0x10}, | 
|  | {0x0408, 0x00}, | 
|  | {0x0409, 0x00}, | 
|  | {0x040a, 0x00}, | 
|  | {0x040b, 0x00}, | 
|  | {0x040c, 0x0f}, | 
|  | {0x040d, 0xd8}, | 
|  | {0x040e, 0x0b}, | 
|  | {0x040f, 0xe0}, | 
|  | {0x034c, 0x0f}, | 
|  | {0x034d, 0xd8}, | 
|  | {0x034e, 0x0b}, | 
|  | {0x034f, 0xe0}, | 
|  | {0x0301, 0x05}, | 
|  | {0x0303, 0x02}, | 
|  | {0x0305, 0x04}, | 
|  | {0x0306, 0x00}, | 
|  | {0x0307, 0xc8}, | 
|  | {0x0309, 0x0a}, | 
|  | {0x030b, 0x01}, | 
|  | {0x030d, 0x02}, | 
|  | {0x030e, 0x01}, | 
|  | {0x030f, 0x5e}, | 
|  | {0x0310, 0x00}, | 
|  | {0x0820, 0x12}, | 
|  | {0x0821, 0xc0}, | 
|  | {0x0822, 0x00}, | 
|  | {0x0823, 0x00}, | 
|  | {0x3e20, 0x01}, | 
|  | {0x3e37, 0x00}, | 
|  | {0x3f50, 0x00}, | 
|  | {0x3f56, 0x00}, | 
|  | {0x3f57, 0xe2}, | 
|  | {0x3c0a, 0x5a}, | 
|  | {0x3c0b, 0x55}, | 
|  | {0x3c0c, 0x28}, | 
|  | {0x3c0d, 0x07}, | 
|  | {0x3c0e, 0xff}, | 
|  | {0x3c0f, 0x00}, | 
|  | {0x3c10, 0x00}, | 
|  | {0x3c11, 0x02}, | 
|  | {0x3c12, 0x00}, | 
|  | {0x3c13, 0x03}, | 
|  | {0x3c14, 0x00}, | 
|  | {0x3c15, 0x00}, | 
|  | {0x3c16, 0x0c}, | 
|  | {0x3c17, 0x0c}, | 
|  | {0x3c18, 0x0c}, | 
|  | {0x3c19, 0x0a}, | 
|  | {0x3c1a, 0x0a}, | 
|  | {0x3c1b, 0x0a}, | 
|  | {0x3c1c, 0x00}, | 
|  | {0x3c1d, 0x00}, | 
|  | {0x3c1e, 0x00}, | 
|  | {0x3c1f, 0x00}, | 
|  | {0x3c20, 0x00}, | 
|  | {0x3c21, 0x00}, | 
|  | {0x3c22, 0x3f}, | 
|  | {0x3c23, 0x0a}, | 
|  | {0x3e35, 0x01}, | 
|  | {0x3f4a, 0x03}, | 
|  | {0x3f4b, 0xbf}, | 
|  | {0x3f26, 0x00}, | 
|  | {0x0202, 0x0d}, | 
|  | {0x0203, 0xc4}, | 
|  | {0x0204, 0x00}, | 
|  | {0x0205, 0x00}, | 
|  | {0x020e, 0x01}, | 
|  | {0x020f, 0x00}, | 
|  | {0x0210, 0x01}, | 
|  | {0x0211, 0x00}, | 
|  | {0x0212, 0x01}, | 
|  | {0x0213, 0x00}, | 
|  | {0x0214, 0x01}, | 
|  | {0x0215, 0x00}, | 
|  | {0xbcf1, 0x00}, | 
|  | }; | 
|  |  | 
|  | /* Supported sensor mode configurations */ | 
|  | static const struct imx412_mode supported_mode = { | 
|  | .width = 4056, | 
|  | .height = 3040, | 
|  | .hblank = 456, | 
|  | .vblank = 506, | 
|  | .vblank_min = 506, | 
|  | .vblank_max = 32420, | 
|  | .pclk = 480000000, | 
|  | .link_freq_idx = 0, | 
|  | .code = MEDIA_BUS_FMT_SRGGB10_1X10, | 
|  | .reg_list = { | 
|  | .num_of_regs = ARRAY_SIZE(mode_4056x3040_regs), | 
|  | .regs = mode_4056x3040_regs, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * to_imx412() - imx412 V4L2 sub-device to imx412 device. | 
|  | * @subdev: pointer to imx412 V4L2 sub-device | 
|  | * | 
|  | * Return: pointer to imx412 device | 
|  | */ | 
|  | static inline struct imx412 *to_imx412(struct v4l2_subdev *subdev) | 
|  | { | 
|  | return container_of(subdev, struct imx412, sd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_read_reg() - Read registers. | 
|  | * @imx412: pointer to imx412 device | 
|  | * @reg: register address | 
|  | * @len: length of bytes to read. Max supported bytes is 4 | 
|  | * @val: pointer to register value to be filled. | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_read_reg(struct imx412 *imx412, u16 reg, u32 len, u32 *val) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); | 
|  | struct i2c_msg msgs[2] = {0}; | 
|  | u8 addr_buf[2] = {0}; | 
|  | u8 data_buf[4] = {0}; | 
|  | int ret; | 
|  |  | 
|  | if (WARN_ON(len > 4)) | 
|  | return -EINVAL; | 
|  |  | 
|  | put_unaligned_be16(reg, addr_buf); | 
|  |  | 
|  | /* Write register address */ | 
|  | msgs[0].addr = client->addr; | 
|  | msgs[0].flags = 0; | 
|  | msgs[0].len = ARRAY_SIZE(addr_buf); | 
|  | msgs[0].buf = addr_buf; | 
|  |  | 
|  | /* Read data from register */ | 
|  | msgs[1].addr = client->addr; | 
|  | msgs[1].flags = I2C_M_RD; | 
|  | msgs[1].len = len; | 
|  | msgs[1].buf = &data_buf[4 - len]; | 
|  |  | 
|  | ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); | 
|  | if (ret != ARRAY_SIZE(msgs)) | 
|  | return -EIO; | 
|  |  | 
|  | *val = get_unaligned_be32(data_buf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_write_reg() - Write register | 
|  | * @imx412: pointer to imx412 device | 
|  | * @reg: register address | 
|  | * @len: length of bytes. Max supported bytes is 4 | 
|  | * @val: register value | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_write_reg(struct imx412 *imx412, u16 reg, u32 len, u32 val) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(&imx412->sd); | 
|  | u8 buf[6] = {0}; | 
|  |  | 
|  | if (WARN_ON(len > 4)) | 
|  | return -EINVAL; | 
|  |  | 
|  | put_unaligned_be16(reg, buf); | 
|  | put_unaligned_be32(val << (8 * (4 - len)), buf + 2); | 
|  | if (i2c_master_send(client, buf, len + 2) != len + 2) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_write_regs() - Write a list of registers | 
|  | * @imx412: pointer to imx412 device | 
|  | * @regs: list of registers to be written | 
|  | * @len: length of registers array | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_write_regs(struct imx412 *imx412, | 
|  | const struct imx412_reg *regs, u32 len) | 
|  | { | 
|  | unsigned int i; | 
|  | int ret; | 
|  |  | 
|  | for (i = 0; i < len; i++) { | 
|  | ret = imx412_write_reg(imx412, regs[i].address, 1, regs[i].val); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_update_controls() - Update control ranges based on streaming mode | 
|  | * @imx412: pointer to imx412 device | 
|  | * @mode: pointer to imx412_mode sensor mode | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_update_controls(struct imx412 *imx412, | 
|  | const struct imx412_mode *mode) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = __v4l2_ctrl_s_ctrl(imx412->link_freq_ctrl, mode->link_freq_idx); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = __v4l2_ctrl_s_ctrl(imx412->hblank_ctrl, mode->hblank); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return __v4l2_ctrl_modify_range(imx412->vblank_ctrl, mode->vblank_min, | 
|  | mode->vblank_max, 1, mode->vblank); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_update_exp_gain() - Set updated exposure and gain | 
|  | * @imx412: pointer to imx412 device | 
|  | * @exposure: updated exposure value | 
|  | * @gain: updated analog gain value | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain) | 
|  | { | 
|  | u32 lpfr, shutter; | 
|  | int ret; | 
|  |  | 
|  | lpfr = imx412->vblank + imx412->cur_mode->height; | 
|  | shutter = lpfr - exposure; | 
|  |  | 
|  | dev_dbg(imx412->dev, "Set exp %u, analog gain %u, shutter %u, lpfr %u", | 
|  | exposure, gain, shutter, lpfr); | 
|  |  | 
|  | ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = imx412_write_reg(imx412, IMX412_REG_LPFR, 2, lpfr); | 
|  | if (ret) | 
|  | goto error_release_group_hold; | 
|  |  | 
|  | ret = imx412_write_reg(imx412, IMX412_REG_EXPOSURE_CIT, 2, shutter); | 
|  | if (ret) | 
|  | goto error_release_group_hold; | 
|  |  | 
|  | ret = imx412_write_reg(imx412, IMX412_REG_AGAIN, 2, gain); | 
|  |  | 
|  | error_release_group_hold: | 
|  | imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_set_ctrl() - Set subdevice control | 
|  | * @ctrl: pointer to v4l2_ctrl structure | 
|  | * | 
|  | * Supported controls: | 
|  | * - V4L2_CID_VBLANK | 
|  | * - cluster controls: | 
|  | *   - V4L2_CID_ANALOGUE_GAIN | 
|  | *   - V4L2_CID_EXPOSURE | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | struct imx412 *imx412 = | 
|  | container_of(ctrl->handler, struct imx412, ctrl_handler); | 
|  | u32 analog_gain; | 
|  | u32 exposure; | 
|  | int ret; | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_VBLANK: | 
|  | imx412->vblank = imx412->vblank_ctrl->val; | 
|  |  | 
|  | dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u", | 
|  | imx412->vblank, | 
|  | imx412->vblank + imx412->cur_mode->height); | 
|  |  | 
|  | ret = __v4l2_ctrl_modify_range(imx412->exp_ctrl, | 
|  | IMX412_EXPOSURE_MIN, | 
|  | imx412->vblank + | 
|  | imx412->cur_mode->height - | 
|  | IMX412_EXPOSURE_OFFSET, | 
|  | 1, IMX412_EXPOSURE_DEFAULT); | 
|  | break; | 
|  | case V4L2_CID_EXPOSURE: | 
|  | /* Set controls only if sensor is in power on state */ | 
|  | if (!pm_runtime_get_if_in_use(imx412->dev)) | 
|  | return 0; | 
|  |  | 
|  | exposure = ctrl->val; | 
|  | analog_gain = imx412->again_ctrl->val; | 
|  |  | 
|  | dev_dbg(imx412->dev, "Received exp %u, analog gain %u", | 
|  | exposure, analog_gain); | 
|  |  | 
|  | ret = imx412_update_exp_gain(imx412, exposure, analog_gain); | 
|  |  | 
|  | pm_runtime_put(imx412->dev); | 
|  |  | 
|  | break; | 
|  | default: | 
|  | dev_err(imx412->dev, "Invalid control %d", ctrl->id); | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* V4l2 subdevice control ops*/ | 
|  | static const struct v4l2_ctrl_ops imx412_ctrl_ops = { | 
|  | .s_ctrl = imx412_set_ctrl, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * imx412_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes | 
|  | * @sd: pointer to imx412 V4L2 sub-device structure | 
|  | * @sd_state: V4L2 sub-device configuration | 
|  | * @code: V4L2 sub-device code enumeration need to be filled | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_enum_mbus_code(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | if (code->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | code->code = supported_mode.code; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_enum_frame_size() - Enumerate V4L2 sub-device frame sizes | 
|  | * @sd: pointer to imx412 V4L2 sub-device structure | 
|  | * @sd_state: V4L2 sub-device configuration | 
|  | * @fsize: V4L2 sub-device size enumeration need to be filled | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_enum_frame_size(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_frame_size_enum *fsize) | 
|  | { | 
|  | if (fsize->index > 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (fsize->code != supported_mode.code) | 
|  | return -EINVAL; | 
|  |  | 
|  | fsize->min_width = supported_mode.width; | 
|  | fsize->max_width = fsize->min_width; | 
|  | fsize->min_height = supported_mode.height; | 
|  | fsize->max_height = fsize->min_height; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_fill_pad_format() - Fill subdevice pad format | 
|  | *                            from selected sensor mode | 
|  | * @imx412: pointer to imx412 device | 
|  | * @mode: pointer to imx412_mode sensor mode | 
|  | * @fmt: V4L2 sub-device format need to be filled | 
|  | */ | 
|  | static void imx412_fill_pad_format(struct imx412 *imx412, | 
|  | const struct imx412_mode *mode, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | fmt->format.width = mode->width; | 
|  | fmt->format.height = mode->height; | 
|  | fmt->format.code = mode->code; | 
|  | fmt->format.field = V4L2_FIELD_NONE; | 
|  | fmt->format.colorspace = V4L2_COLORSPACE_RAW; | 
|  | fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; | 
|  | fmt->format.quantization = V4L2_QUANTIZATION_DEFAULT; | 
|  | fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_get_pad_format() - Get subdevice pad format | 
|  | * @sd: pointer to imx412 V4L2 sub-device structure | 
|  | * @sd_state: V4L2 sub-device configuration | 
|  | * @fmt: V4L2 sub-device format need to be set | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_get_pad_format(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  |  | 
|  | mutex_lock(&imx412->mutex); | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { | 
|  | struct v4l2_mbus_framefmt *framefmt; | 
|  |  | 
|  | framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); | 
|  | fmt->format = *framefmt; | 
|  | } else { | 
|  | imx412_fill_pad_format(imx412, imx412->cur_mode, fmt); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&imx412->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_set_pad_format() - Set subdevice pad format | 
|  | * @sd: pointer to imx412 V4L2 sub-device structure | 
|  | * @sd_state: V4L2 sub-device configuration | 
|  | * @fmt: V4L2 sub-device format need to be set | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_set_pad_format(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  | const struct imx412_mode *mode; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&imx412->mutex); | 
|  |  | 
|  | mode = &supported_mode; | 
|  | imx412_fill_pad_format(imx412, mode, fmt); | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { | 
|  | struct v4l2_mbus_framefmt *framefmt; | 
|  |  | 
|  | framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); | 
|  | *framefmt = fmt->format; | 
|  | } else { | 
|  | ret = imx412_update_controls(imx412, mode); | 
|  | if (!ret) | 
|  | imx412->cur_mode = mode; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&imx412->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_init_pad_cfg() - Initialize sub-device pad configuration | 
|  | * @sd: pointer to imx412 V4L2 sub-device structure | 
|  | * @sd_state: V4L2 sub-device configuration | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_init_pad_cfg(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_state *sd_state) | 
|  | { | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  | struct v4l2_subdev_format fmt = { 0 }; | 
|  |  | 
|  | fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; | 
|  | imx412_fill_pad_format(imx412, &supported_mode, &fmt); | 
|  |  | 
|  | return imx412_set_pad_format(sd, sd_state, &fmt); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_start_streaming() - Start sensor stream | 
|  | * @imx412: pointer to imx412 device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_start_streaming(struct imx412 *imx412) | 
|  | { | 
|  | const struct imx412_reg_list *reg_list; | 
|  | int ret; | 
|  |  | 
|  | /* Write sensor mode registers */ | 
|  | reg_list = &imx412->cur_mode->reg_list; | 
|  | ret = imx412_write_regs(imx412, reg_list->regs, | 
|  | reg_list->num_of_regs); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "fail to write initial registers"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Setup handler will write actual exposure and gain */ | 
|  | ret =  __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "fail to setup handler"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Delay is required before streaming*/ | 
|  | usleep_range(7400, 8000); | 
|  |  | 
|  | /* Start streaming */ | 
|  | ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, | 
|  | 1, IMX412_MODE_STREAMING); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "fail to start streaming"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_stop_streaming() - Stop sensor stream | 
|  | * @imx412: pointer to imx412 device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_stop_streaming(struct imx412 *imx412) | 
|  | { | 
|  | return imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, | 
|  | 1, IMX412_MODE_STANDBY); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_set_stream() - Enable sensor streaming | 
|  | * @sd: pointer to imx412 subdevice | 
|  | * @enable: set to enable sensor streaming | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_set_stream(struct v4l2_subdev *sd, int enable) | 
|  | { | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&imx412->mutex); | 
|  |  | 
|  | if (imx412->streaming == enable) { | 
|  | mutex_unlock(&imx412->mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (enable) { | 
|  | ret = pm_runtime_resume_and_get(imx412->dev); | 
|  | if (ret) | 
|  | goto error_unlock; | 
|  |  | 
|  | ret = imx412_start_streaming(imx412); | 
|  | if (ret) | 
|  | goto error_power_off; | 
|  | } else { | 
|  | imx412_stop_streaming(imx412); | 
|  | pm_runtime_put(imx412->dev); | 
|  | } | 
|  |  | 
|  | imx412->streaming = enable; | 
|  |  | 
|  | mutex_unlock(&imx412->mutex); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_power_off: | 
|  | pm_runtime_put(imx412->dev); | 
|  | error_unlock: | 
|  | mutex_unlock(&imx412->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_detect() - Detect imx412 sensor | 
|  | * @imx412: pointer to imx412 device | 
|  | * | 
|  | * Return: 0 if successful, -EIO if sensor id does not match | 
|  | */ | 
|  | static int imx412_detect(struct imx412 *imx412) | 
|  | { | 
|  | int ret; | 
|  | u32 val; | 
|  |  | 
|  | ret = imx412_read_reg(imx412, IMX412_REG_ID, 2, &val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (val != IMX412_ID) { | 
|  | dev_err(imx412->dev, "chip id mismatch: %x!=%x", | 
|  | IMX412_ID, val); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_parse_hw_config() - Parse HW configuration and check if supported | 
|  | * @imx412: pointer to imx412 device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_parse_hw_config(struct imx412 *imx412) | 
|  | { | 
|  | struct fwnode_handle *fwnode = dev_fwnode(imx412->dev); | 
|  | struct v4l2_fwnode_endpoint bus_cfg = { | 
|  | .bus_type = V4L2_MBUS_CSI2_DPHY | 
|  | }; | 
|  | struct fwnode_handle *ep; | 
|  | unsigned long rate; | 
|  | unsigned int i; | 
|  | int ret; | 
|  |  | 
|  | if (!fwnode) | 
|  | return -ENXIO; | 
|  |  | 
|  | /* Request optional reset pin */ | 
|  | imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(imx412->reset_gpio)) { | 
|  | dev_err(imx412->dev, "failed to get reset gpio %ld", | 
|  | PTR_ERR(imx412->reset_gpio)); | 
|  | return PTR_ERR(imx412->reset_gpio); | 
|  | } | 
|  |  | 
|  | /* Get sensor input clock */ | 
|  | imx412->inclk = devm_clk_get(imx412->dev, NULL); | 
|  | if (IS_ERR(imx412->inclk)) { | 
|  | dev_err(imx412->dev, "could not get inclk"); | 
|  | return PTR_ERR(imx412->inclk); | 
|  | } | 
|  |  | 
|  | rate = clk_get_rate(imx412->inclk); | 
|  | if (rate != IMX412_INCLK_RATE) { | 
|  | dev_err(imx412->dev, "inclk frequency mismatch"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ep = fwnode_graph_get_next_endpoint(fwnode, NULL); | 
|  | if (!ep) | 
|  | return -ENXIO; | 
|  |  | 
|  | ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); | 
|  | fwnode_handle_put(ep); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) { | 
|  | dev_err(imx412->dev, | 
|  | "number of CSI2 data lanes %d is not supported", | 
|  | bus_cfg.bus.mipi_csi2.num_data_lanes); | 
|  | ret = -EINVAL; | 
|  | goto done_endpoint_free; | 
|  | } | 
|  |  | 
|  | if (!bus_cfg.nr_of_link_frequencies) { | 
|  | dev_err(imx412->dev, "no link frequencies defined"); | 
|  | ret = -EINVAL; | 
|  | goto done_endpoint_free; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) | 
|  | if (bus_cfg.link_frequencies[i] == IMX412_LINK_FREQ) | 
|  | goto done_endpoint_free; | 
|  |  | 
|  | ret = -EINVAL; | 
|  |  | 
|  | done_endpoint_free: | 
|  | v4l2_fwnode_endpoint_free(&bus_cfg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* V4l2 subdevice ops */ | 
|  | static const struct v4l2_subdev_video_ops imx412_video_ops = { | 
|  | .s_stream = imx412_set_stream, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_pad_ops imx412_pad_ops = { | 
|  | .init_cfg = imx412_init_pad_cfg, | 
|  | .enum_mbus_code = imx412_enum_mbus_code, | 
|  | .enum_frame_size = imx412_enum_frame_size, | 
|  | .get_fmt = imx412_get_pad_format, | 
|  | .set_fmt = imx412_set_pad_format, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops imx412_subdev_ops = { | 
|  | .video = &imx412_video_ops, | 
|  | .pad = &imx412_pad_ops, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * imx412_power_on() - Sensor power on sequence | 
|  | * @dev: pointer to i2c device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_power_on(struct device *dev) | 
|  | { | 
|  | struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  | int ret; | 
|  |  | 
|  | gpiod_set_value_cansleep(imx412->reset_gpio, 1); | 
|  |  | 
|  | ret = clk_prepare_enable(imx412->inclk); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "fail to enable inclk"); | 
|  | goto error_reset; | 
|  | } | 
|  |  | 
|  | usleep_range(1000, 1200); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_reset: | 
|  | gpiod_set_value_cansleep(imx412->reset_gpio, 0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_power_off() - Sensor power off sequence | 
|  | * @dev: pointer to i2c device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_power_off(struct device *dev) | 
|  | { | 
|  | struct v4l2_subdev *sd = dev_get_drvdata(dev); | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  |  | 
|  | gpiod_set_value_cansleep(imx412->reset_gpio, 0); | 
|  |  | 
|  | clk_disable_unprepare(imx412->inclk); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_init_controls() - Initialize sensor subdevice controls | 
|  | * @imx412: pointer to imx412 device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_init_controls(struct imx412 *imx412) | 
|  | { | 
|  | struct v4l2_ctrl_handler *ctrl_hdlr = &imx412->ctrl_handler; | 
|  | const struct imx412_mode *mode = imx412->cur_mode; | 
|  | u32 lpfr; | 
|  | int ret; | 
|  |  | 
|  | ret = v4l2_ctrl_handler_init(ctrl_hdlr, 6); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Serialize controls with sensor device */ | 
|  | ctrl_hdlr->lock = &imx412->mutex; | 
|  |  | 
|  | /* Initialize exposure and gain */ | 
|  | lpfr = mode->vblank + mode->height; | 
|  | imx412->exp_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_EXPOSURE, | 
|  | IMX412_EXPOSURE_MIN, | 
|  | lpfr - IMX412_EXPOSURE_OFFSET, | 
|  | IMX412_EXPOSURE_STEP, | 
|  | IMX412_EXPOSURE_DEFAULT); | 
|  |  | 
|  | imx412->again_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_ANALOGUE_GAIN, | 
|  | IMX412_AGAIN_MIN, | 
|  | IMX412_AGAIN_MAX, | 
|  | IMX412_AGAIN_STEP, | 
|  | IMX412_AGAIN_DEFAULT); | 
|  |  | 
|  | v4l2_ctrl_cluster(2, &imx412->exp_ctrl); | 
|  |  | 
|  | imx412->vblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_VBLANK, | 
|  | mode->vblank_min, | 
|  | mode->vblank_max, | 
|  | 1, mode->vblank); | 
|  |  | 
|  | /* Read only controls */ | 
|  | imx412->pclk_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_PIXEL_RATE, | 
|  | mode->pclk, mode->pclk, | 
|  | 1, mode->pclk); | 
|  |  | 
|  | imx412->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_LINK_FREQ, | 
|  | ARRAY_SIZE(link_freq) - | 
|  | 1, | 
|  | mode->link_freq_idx, | 
|  | link_freq); | 
|  | if (imx412->link_freq_ctrl) | 
|  | imx412->link_freq_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; | 
|  |  | 
|  | imx412->hblank_ctrl = v4l2_ctrl_new_std(ctrl_hdlr, | 
|  | &imx412_ctrl_ops, | 
|  | V4L2_CID_HBLANK, | 
|  | IMX412_REG_MIN, | 
|  | IMX412_REG_MAX, | 
|  | 1, mode->hblank); | 
|  | if (imx412->hblank_ctrl) | 
|  | imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; | 
|  |  | 
|  | if (ctrl_hdlr->error) { | 
|  | dev_err(imx412->dev, "control init failed: %d", | 
|  | ctrl_hdlr->error); | 
|  | v4l2_ctrl_handler_free(ctrl_hdlr); | 
|  | return ctrl_hdlr->error; | 
|  | } | 
|  |  | 
|  | imx412->sd.ctrl_handler = ctrl_hdlr; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_probe() - I2C client device binding | 
|  | * @client: pointer to i2c client device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_probe(struct i2c_client *client) | 
|  | { | 
|  | struct imx412 *imx412; | 
|  | int ret; | 
|  |  | 
|  | imx412 = devm_kzalloc(&client->dev, sizeof(*imx412), GFP_KERNEL); | 
|  | if (!imx412) | 
|  | return -ENOMEM; | 
|  |  | 
|  | imx412->dev = &client->dev; | 
|  |  | 
|  | /* Initialize subdev */ | 
|  | v4l2_i2c_subdev_init(&imx412->sd, client, &imx412_subdev_ops); | 
|  |  | 
|  | ret = imx412_parse_hw_config(imx412); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "HW configuration is not supported"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_init(&imx412->mutex); | 
|  |  | 
|  | ret = imx412_power_on(imx412->dev); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "failed to power-on the sensor"); | 
|  | goto error_mutex_destroy; | 
|  | } | 
|  |  | 
|  | /* Check module identity */ | 
|  | ret = imx412_detect(imx412); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "failed to find sensor: %d", ret); | 
|  | goto error_power_off; | 
|  | } | 
|  |  | 
|  | /* Set default mode to max resolution */ | 
|  | imx412->cur_mode = &supported_mode; | 
|  | imx412->vblank = imx412->cur_mode->vblank; | 
|  |  | 
|  | ret = imx412_init_controls(imx412); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "failed to init controls: %d", ret); | 
|  | goto error_power_off; | 
|  | } | 
|  |  | 
|  | /* Initialize subdev */ | 
|  | imx412->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
|  | imx412->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; | 
|  |  | 
|  | /* Initialize source pad */ | 
|  | imx412->pad.flags = MEDIA_PAD_FL_SOURCE; | 
|  | ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad); | 
|  | if (ret) { | 
|  | dev_err(imx412->dev, "failed to init entity pads: %d", ret); | 
|  | goto error_handler_free; | 
|  | } | 
|  |  | 
|  | ret = v4l2_async_register_subdev_sensor(&imx412->sd); | 
|  | if (ret < 0) { | 
|  | dev_err(imx412->dev, | 
|  | "failed to register async subdev: %d", ret); | 
|  | goto error_media_entity; | 
|  | } | 
|  |  | 
|  | pm_runtime_set_active(imx412->dev); | 
|  | pm_runtime_enable(imx412->dev); | 
|  | pm_runtime_idle(imx412->dev); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_media_entity: | 
|  | media_entity_cleanup(&imx412->sd.entity); | 
|  | error_handler_free: | 
|  | v4l2_ctrl_handler_free(imx412->sd.ctrl_handler); | 
|  | error_power_off: | 
|  | imx412_power_off(imx412->dev); | 
|  | error_mutex_destroy: | 
|  | mutex_destroy(&imx412->mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * imx412_remove() - I2C client device unbinding | 
|  | * @client: pointer to I2C client device | 
|  | * | 
|  | * Return: 0 if successful, error code otherwise. | 
|  | */ | 
|  | static int imx412_remove(struct i2c_client *client) | 
|  | { | 
|  | struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
|  | struct imx412 *imx412 = to_imx412(sd); | 
|  |  | 
|  | v4l2_async_unregister_subdev(sd); | 
|  | media_entity_cleanup(&sd->entity); | 
|  | v4l2_ctrl_handler_free(sd->ctrl_handler); | 
|  |  | 
|  | pm_runtime_disable(&client->dev); | 
|  | if (!pm_runtime_status_suspended(&client->dev)) | 
|  | imx412_power_off(&client->dev); | 
|  | pm_runtime_set_suspended(&client->dev); | 
|  |  | 
|  | mutex_destroy(&imx412->mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops imx412_pm_ops = { | 
|  | SET_RUNTIME_PM_OPS(imx412_power_off, imx412_power_on, NULL) | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id imx412_of_match[] = { | 
|  | { .compatible = "sony,imx412" }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, imx412_of_match); | 
|  |  | 
|  | static struct i2c_driver imx412_driver = { | 
|  | .probe_new = imx412_probe, | 
|  | .remove = imx412_remove, | 
|  | .driver = { | 
|  | .name = "imx412", | 
|  | .pm = &imx412_pm_ops, | 
|  | .of_match_table = imx412_of_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(imx412_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Sony imx412 sensor driver"); | 
|  | MODULE_LICENSE("GPL"); |