|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Wireless utility functions | 
|  | * | 
|  | * Copyright 2007-2009	Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright 2017	Intel Deutschland GmbH | 
|  | * Copyright (C) 2018-2020 Intel Corporation | 
|  | */ | 
|  | #include <linux/export.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/ieee80211.h> | 
|  | #include <net/cfg80211.h> | 
|  | #include <net/ip.h> | 
|  | #include <net/dsfield.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/mpls.h> | 
|  | #include <linux/gcd.h> | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/nospec.h> | 
|  | #include "core.h" | 
|  | #include "rdev-ops.h" | 
|  |  | 
|  |  | 
|  | const struct ieee80211_rate * | 
|  | ieee80211_get_response_rate(struct ieee80211_supported_band *sband, | 
|  | u32 basic_rates, int bitrate) | 
|  | { | 
|  | struct ieee80211_rate *result = &sband->bitrates[0]; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (!(basic_rates & BIT(i))) | 
|  | continue; | 
|  | if (sband->bitrates[i].bitrate > bitrate) | 
|  | continue; | 
|  | result = &sband->bitrates[i]; | 
|  | } | 
|  |  | 
|  | return result; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_response_rate); | 
|  |  | 
|  | u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband, | 
|  | enum nl80211_bss_scan_width scan_width) | 
|  | { | 
|  | struct ieee80211_rate *bitrates; | 
|  | u32 mandatory_rates = 0; | 
|  | enum ieee80211_rate_flags mandatory_flag; | 
|  | int i; | 
|  |  | 
|  | if (WARN_ON(!sband)) | 
|  | return 1; | 
|  |  | 
|  | if (sband->band == NL80211_BAND_2GHZ) { | 
|  | if (scan_width == NL80211_BSS_CHAN_WIDTH_5 || | 
|  | scan_width == NL80211_BSS_CHAN_WIDTH_10) | 
|  | mandatory_flag = IEEE80211_RATE_MANDATORY_G; | 
|  | else | 
|  | mandatory_flag = IEEE80211_RATE_MANDATORY_B; | 
|  | } else { | 
|  | mandatory_flag = IEEE80211_RATE_MANDATORY_A; | 
|  | } | 
|  |  | 
|  | bitrates = sband->bitrates; | 
|  | for (i = 0; i < sband->n_bitrates; i++) | 
|  | if (bitrates[i].flags & mandatory_flag) | 
|  | mandatory_rates |= BIT(i); | 
|  | return mandatory_rates; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_mandatory_rates); | 
|  |  | 
|  | u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band) | 
|  | { | 
|  | /* see 802.11 17.3.8.3.2 and Annex J | 
|  | * there are overlapping channel numbers in 5GHz and 2GHz bands */ | 
|  | if (chan <= 0) | 
|  | return 0; /* not supported */ | 
|  | switch (band) { | 
|  | case NL80211_BAND_2GHZ: | 
|  | case NL80211_BAND_LC: | 
|  | if (chan == 14) | 
|  | return MHZ_TO_KHZ(2484); | 
|  | else if (chan < 14) | 
|  | return MHZ_TO_KHZ(2407 + chan * 5); | 
|  | break; | 
|  | case NL80211_BAND_5GHZ: | 
|  | if (chan >= 182 && chan <= 196) | 
|  | return MHZ_TO_KHZ(4000 + chan * 5); | 
|  | else | 
|  | return MHZ_TO_KHZ(5000 + chan * 5); | 
|  | break; | 
|  | case NL80211_BAND_6GHZ: | 
|  | /* see 802.11ax D6.1 27.3.23.2 */ | 
|  | if (chan == 2) | 
|  | return MHZ_TO_KHZ(5935); | 
|  | if (chan <= 233) | 
|  | return MHZ_TO_KHZ(5950 + chan * 5); | 
|  | break; | 
|  | case NL80211_BAND_60GHZ: | 
|  | if (chan < 7) | 
|  | return MHZ_TO_KHZ(56160 + chan * 2160); | 
|  | break; | 
|  | case NL80211_BAND_S1GHZ: | 
|  | return 902000 + chan * 500; | 
|  | default: | 
|  | ; | 
|  | } | 
|  | return 0; /* not supported */ | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_channel_to_freq_khz); | 
|  |  | 
|  | enum nl80211_chan_width | 
|  | ieee80211_s1g_channel_width(const struct ieee80211_channel *chan) | 
|  | { | 
|  | if (WARN_ON(!chan || chan->band != NL80211_BAND_S1GHZ)) | 
|  | return NL80211_CHAN_WIDTH_20_NOHT; | 
|  |  | 
|  | /*S1G defines a single allowed channel width per channel. | 
|  | * Extract that width here. | 
|  | */ | 
|  | if (chan->flags & IEEE80211_CHAN_1MHZ) | 
|  | return NL80211_CHAN_WIDTH_1; | 
|  | else if (chan->flags & IEEE80211_CHAN_2MHZ) | 
|  | return NL80211_CHAN_WIDTH_2; | 
|  | else if (chan->flags & IEEE80211_CHAN_4MHZ) | 
|  | return NL80211_CHAN_WIDTH_4; | 
|  | else if (chan->flags & IEEE80211_CHAN_8MHZ) | 
|  | return NL80211_CHAN_WIDTH_8; | 
|  | else if (chan->flags & IEEE80211_CHAN_16MHZ) | 
|  | return NL80211_CHAN_WIDTH_16; | 
|  |  | 
|  | pr_err("unknown channel width for channel at %dKHz?\n", | 
|  | ieee80211_channel_to_khz(chan)); | 
|  |  | 
|  | return NL80211_CHAN_WIDTH_1; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_s1g_channel_width); | 
|  |  | 
|  | int ieee80211_freq_khz_to_channel(u32 freq) | 
|  | { | 
|  | /* TODO: just handle MHz for now */ | 
|  | freq = KHZ_TO_MHZ(freq); | 
|  |  | 
|  | /* see 802.11 17.3.8.3.2 and Annex J */ | 
|  | if (freq == 2484) | 
|  | return 14; | 
|  | else if (freq < 2484) | 
|  | return (freq - 2407) / 5; | 
|  | else if (freq >= 4910 && freq <= 4980) | 
|  | return (freq - 4000) / 5; | 
|  | else if (freq < 5925) | 
|  | return (freq - 5000) / 5; | 
|  | else if (freq == 5935) | 
|  | return 2; | 
|  | else if (freq <= 45000) /* DMG band lower limit */ | 
|  | /* see 802.11ax D6.1 27.3.22.2 */ | 
|  | return (freq - 5950) / 5; | 
|  | else if (freq >= 58320 && freq <= 70200) | 
|  | return (freq - 56160) / 2160; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_freq_khz_to_channel); | 
|  |  | 
|  | struct ieee80211_channel *ieee80211_get_channel_khz(struct wiphy *wiphy, | 
|  | u32 freq) | 
|  | { | 
|  | enum nl80211_band band; | 
|  | struct ieee80211_supported_band *sband; | 
|  | int i; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | sband = wiphy->bands[band]; | 
|  |  | 
|  | if (!sband) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | struct ieee80211_channel *chan = &sband->channels[i]; | 
|  |  | 
|  | if (ieee80211_channel_to_khz(chan) == freq) | 
|  | return chan; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_channel_khz); | 
|  |  | 
|  | static void set_mandatory_flags_band(struct ieee80211_supported_band *sband) | 
|  | { | 
|  | int i, want; | 
|  |  | 
|  | switch (sband->band) { | 
|  | case NL80211_BAND_5GHZ: | 
|  | case NL80211_BAND_6GHZ: | 
|  | want = 3; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | if (sband->bitrates[i].bitrate == 60 || | 
|  | sband->bitrates[i].bitrate == 120 || | 
|  | sband->bitrates[i].bitrate == 240) { | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_A; | 
|  | want--; | 
|  | } | 
|  | } | 
|  | WARN_ON(want); | 
|  | break; | 
|  | case NL80211_BAND_2GHZ: | 
|  | case NL80211_BAND_LC: | 
|  | want = 7; | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | switch (sband->bitrates[i].bitrate) { | 
|  | case 10: | 
|  | case 20: | 
|  | case 55: | 
|  | case 110: | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_B | | 
|  | IEEE80211_RATE_MANDATORY_G; | 
|  | want--; | 
|  | break; | 
|  | case 60: | 
|  | case 120: | 
|  | case 240: | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_MANDATORY_G; | 
|  | want--; | 
|  | fallthrough; | 
|  | default: | 
|  | sband->bitrates[i].flags |= | 
|  | IEEE80211_RATE_ERP_G; | 
|  | break; | 
|  | } | 
|  | } | 
|  | WARN_ON(want != 0 && want != 3); | 
|  | break; | 
|  | case NL80211_BAND_60GHZ: | 
|  | /* check for mandatory HT MCS 1..4 */ | 
|  | WARN_ON(!sband->ht_cap.ht_supported); | 
|  | WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e); | 
|  | break; | 
|  | case NL80211_BAND_S1GHZ: | 
|  | /* Figure 9-589bd: 3 means unsupported, so != 3 means at least | 
|  | * mandatory is ok. | 
|  | */ | 
|  | WARN_ON((sband->s1g_cap.nss_mcs[0] & 0x3) == 0x3); | 
|  | break; | 
|  | case NUM_NL80211_BANDS: | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_set_bitrate_flags(struct wiphy *wiphy) | 
|  | { | 
|  | enum nl80211_band band; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) | 
|  | if (wiphy->bands[band]) | 
|  | set_mandatory_flags_band(wiphy->bands[band]); | 
|  | } | 
|  |  | 
|  | bool cfg80211_supported_cipher_suite(struct wiphy *wiphy, u32 cipher) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < wiphy->n_cipher_suites; i++) | 
|  | if (cipher == wiphy->cipher_suites[i]) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | cfg80211_igtk_cipher_supported(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct wiphy *wiphy = &rdev->wiphy; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < wiphy->n_cipher_suites; i++) { | 
|  | switch (wiphy->cipher_suites[i]) { | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool cfg80211_valid_key_idx(struct cfg80211_registered_device *rdev, | 
|  | int key_idx, bool pairwise) | 
|  | { | 
|  | int max_key_idx; | 
|  |  | 
|  | if (pairwise) | 
|  | max_key_idx = 3; | 
|  | else if (wiphy_ext_feature_isset(&rdev->wiphy, | 
|  | NL80211_EXT_FEATURE_BEACON_PROTECTION) || | 
|  | wiphy_ext_feature_isset(&rdev->wiphy, | 
|  | NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT)) | 
|  | max_key_idx = 7; | 
|  | else if (cfg80211_igtk_cipher_supported(rdev)) | 
|  | max_key_idx = 5; | 
|  | else | 
|  | max_key_idx = 3; | 
|  |  | 
|  | if (key_idx < 0 || key_idx > max_key_idx) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | int cfg80211_validate_key_settings(struct cfg80211_registered_device *rdev, | 
|  | struct key_params *params, int key_idx, | 
|  | bool pairwise, const u8 *mac_addr) | 
|  | { | 
|  | if (!cfg80211_valid_key_idx(rdev, key_idx, pairwise)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!pairwise && mac_addr && !(rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pairwise && !mac_addr) | 
|  | return -EINVAL; | 
|  |  | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | /* Extended Key ID can only be used with CCMP/GCMP ciphers */ | 
|  | if ((pairwise && key_idx) || | 
|  | params->mode != NL80211_KEY_RX_TX) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | /* IEEE802.11-2016 allows only 0 and - when supporting | 
|  | * Extended Key ID - 1 as index for pairwise keys. | 
|  | * @NL80211_KEY_NO_TX is only allowed for pairwise keys when | 
|  | * the driver supports Extended Key ID. | 
|  | * @NL80211_KEY_SET_TX can't be set when installing and | 
|  | * validating a key. | 
|  | */ | 
|  | if ((params->mode == NL80211_KEY_NO_TX && !pairwise) || | 
|  | params->mode == NL80211_KEY_SET_TX) | 
|  | return -EINVAL; | 
|  | if (wiphy_ext_feature_isset(&rdev->wiphy, | 
|  | NL80211_EXT_FEATURE_EXT_KEY_ID)) { | 
|  | if (pairwise && (key_idx < 0 || key_idx > 1)) | 
|  | return -EINVAL; | 
|  | } else if (pairwise && key_idx) { | 
|  | return -EINVAL; | 
|  | } | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | /* Disallow BIP (group-only) cipher as pairwise cipher */ | 
|  | if (pairwise) | 
|  | return -EINVAL; | 
|  | if (key_idx < 4) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | if (key_idx > 3) | 
|  | return -EINVAL; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | if (params->key_len != WLAN_KEY_LEN_WEP40) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | if (params->key_len != WLAN_KEY_LEN_TKIP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | if (params->key_len != WLAN_KEY_LEN_CCMP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | if (params->key_len != WLAN_KEY_LEN_CCMP_256) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | if (params->key_len != WLAN_KEY_LEN_GCMP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | if (params->key_len != WLAN_KEY_LEN_GCMP_256) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | if (params->key_len != WLAN_KEY_LEN_WEP104) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | if (params->key_len != WLAN_KEY_LEN_AES_CMAC) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | if (params->key_len != WLAN_KEY_LEN_BIP_CMAC_256) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | if (params->key_len != WLAN_KEY_LEN_BIP_GMAC_128) | 
|  | return -EINVAL; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | if (params->key_len != WLAN_KEY_LEN_BIP_GMAC_256) | 
|  | return -EINVAL; | 
|  | break; | 
|  | default: | 
|  | /* | 
|  | * We don't know anything about this algorithm, | 
|  | * allow using it -- but the driver must check | 
|  | * all parameters! We still check below whether | 
|  | * or not the driver supports this algorithm, | 
|  | * of course. | 
|  | */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (params->seq) { | 
|  | switch (params->cipher) { | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | /* These ciphers do not use key sequence */ | 
|  | return -EINVAL; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | if (params->seq_len != 6) | 
|  | return -EINVAL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!cfg80211_supported_cipher_suite(&rdev->wiphy, params->cipher)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc) | 
|  | { | 
|  | unsigned int hdrlen = 24; | 
|  |  | 
|  | if (ieee80211_is_ext(fc)) { | 
|  | hdrlen = 4; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_data(fc)) { | 
|  | if (ieee80211_has_a4(fc)) | 
|  | hdrlen = 30; | 
|  | if (ieee80211_is_data_qos(fc)) { | 
|  | hdrlen += IEEE80211_QOS_CTL_LEN; | 
|  | if (ieee80211_has_order(fc)) | 
|  | hdrlen += IEEE80211_HT_CTL_LEN; | 
|  | } | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_mgmt(fc)) { | 
|  | if (ieee80211_has_order(fc)) | 
|  | hdrlen += IEEE80211_HT_CTL_LEN; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (ieee80211_is_ctl(fc)) { | 
|  | /* | 
|  | * ACK and CTS are 10 bytes, all others 16. To see how | 
|  | * to get this condition consider | 
|  | *   subtype mask:   0b0000000011110000 (0x00F0) | 
|  | *   ACK subtype:    0b0000000011010000 (0x00D0) | 
|  | *   CTS subtype:    0b0000000011000000 (0x00C0) | 
|  | *   bits that matter:         ^^^      (0x00E0) | 
|  | *   value of those: 0b0000000011000000 (0x00C0) | 
|  | */ | 
|  | if ((fc & cpu_to_le16(0x00E0)) == cpu_to_le16(0x00C0)) | 
|  | hdrlen = 10; | 
|  | else | 
|  | hdrlen = 16; | 
|  | } | 
|  | out: | 
|  | return hdrlen; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_hdrlen); | 
|  |  | 
|  | unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = | 
|  | (const struct ieee80211_hdr *)skb->data; | 
|  | unsigned int hdrlen; | 
|  |  | 
|  | if (unlikely(skb->len < 10)) | 
|  | return 0; | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | if (unlikely(hdrlen > skb->len)) | 
|  | return 0; | 
|  | return hdrlen; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb); | 
|  |  | 
|  | static unsigned int __ieee80211_get_mesh_hdrlen(u8 flags) | 
|  | { | 
|  | int ae = flags & MESH_FLAGS_AE; | 
|  | /* 802.11-2012, 8.2.4.7.3 */ | 
|  | switch (ae) { | 
|  | default: | 
|  | case 0: | 
|  | return 6; | 
|  | case MESH_FLAGS_AE_A4: | 
|  | return 12; | 
|  | case MESH_FLAGS_AE_A5_A6: | 
|  | return 18; | 
|  | } | 
|  | } | 
|  |  | 
|  | unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr) | 
|  | { | 
|  | return __ieee80211_get_mesh_hdrlen(meshhdr->flags); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen); | 
|  |  | 
|  | int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, | 
|  | const u8 *addr, enum nl80211_iftype iftype, | 
|  | u8 data_offset, bool is_amsdu) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | 
|  | struct { | 
|  | u8 hdr[ETH_ALEN] __aligned(2); | 
|  | __be16 proto; | 
|  | } payload; | 
|  | struct ethhdr tmp; | 
|  | u16 hdrlen; | 
|  | u8 mesh_flags = 0; | 
|  |  | 
|  | if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) | 
|  | return -1; | 
|  |  | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control) + data_offset; | 
|  | if (skb->len < hdrlen + 8) | 
|  | return -1; | 
|  |  | 
|  | /* convert IEEE 802.11 header + possible LLC headers into Ethernet | 
|  | * header | 
|  | * IEEE 802.11 address fields: | 
|  | * ToDS FromDS Addr1 Addr2 Addr3 Addr4 | 
|  | *   0     0   DA    SA    BSSID n/a | 
|  | *   0     1   DA    BSSID SA    n/a | 
|  | *   1     0   BSSID SA    DA    n/a | 
|  | *   1     1   RA    TA    DA    SA | 
|  | */ | 
|  | memcpy(tmp.h_dest, ieee80211_get_DA(hdr), ETH_ALEN); | 
|  | memcpy(tmp.h_source, ieee80211_get_SA(hdr), ETH_ALEN); | 
|  |  | 
|  | if (iftype == NL80211_IFTYPE_MESH_POINT) | 
|  | skb_copy_bits(skb, hdrlen, &mesh_flags, 1); | 
|  |  | 
|  | mesh_flags &= MESH_FLAGS_AE; | 
|  |  | 
|  | switch (hdr->frame_control & | 
|  | cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) { | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS): | 
|  | if (unlikely(iftype != NL80211_IFTYPE_AP && | 
|  | iftype != NL80211_IFTYPE_AP_VLAN && | 
|  | iftype != NL80211_IFTYPE_P2P_GO)) | 
|  | return -1; | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS): | 
|  | if (unlikely(iftype != NL80211_IFTYPE_MESH_POINT && | 
|  | iftype != NL80211_IFTYPE_AP_VLAN && | 
|  | iftype != NL80211_IFTYPE_STATION)) | 
|  | return -1; | 
|  | if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
|  | if (mesh_flags == MESH_FLAGS_AE_A4) | 
|  | return -1; | 
|  | if (mesh_flags == MESH_FLAGS_AE_A5_A6) { | 
|  | skb_copy_bits(skb, hdrlen + | 
|  | offsetof(struct ieee80211s_hdr, eaddr1), | 
|  | tmp.h_dest, 2 * ETH_ALEN); | 
|  | } | 
|  | hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); | 
|  | } | 
|  | break; | 
|  | case cpu_to_le16(IEEE80211_FCTL_FROMDS): | 
|  | if ((iftype != NL80211_IFTYPE_STATION && | 
|  | iftype != NL80211_IFTYPE_P2P_CLIENT && | 
|  | iftype != NL80211_IFTYPE_MESH_POINT) || | 
|  | (is_multicast_ether_addr(tmp.h_dest) && | 
|  | ether_addr_equal(tmp.h_source, addr))) | 
|  | return -1; | 
|  | if (iftype == NL80211_IFTYPE_MESH_POINT) { | 
|  | if (mesh_flags == MESH_FLAGS_AE_A5_A6) | 
|  | return -1; | 
|  | if (mesh_flags == MESH_FLAGS_AE_A4) | 
|  | skb_copy_bits(skb, hdrlen + | 
|  | offsetof(struct ieee80211s_hdr, eaddr1), | 
|  | tmp.h_source, ETH_ALEN); | 
|  | hdrlen += __ieee80211_get_mesh_hdrlen(mesh_flags); | 
|  | } | 
|  | break; | 
|  | case cpu_to_le16(0): | 
|  | if (iftype != NL80211_IFTYPE_ADHOC && | 
|  | iftype != NL80211_IFTYPE_STATION && | 
|  | iftype != NL80211_IFTYPE_OCB) | 
|  | return -1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | skb_copy_bits(skb, hdrlen, &payload, sizeof(payload)); | 
|  | tmp.h_proto = payload.proto; | 
|  |  | 
|  | if (likely((!is_amsdu && ether_addr_equal(payload.hdr, rfc1042_header) && | 
|  | tmp.h_proto != htons(ETH_P_AARP) && | 
|  | tmp.h_proto != htons(ETH_P_IPX)) || | 
|  | ether_addr_equal(payload.hdr, bridge_tunnel_header))) | 
|  | /* remove RFC1042 or Bridge-Tunnel encapsulation and | 
|  | * replace EtherType */ | 
|  | hdrlen += ETH_ALEN + 2; | 
|  | else | 
|  | tmp.h_proto = htons(skb->len - hdrlen); | 
|  |  | 
|  | pskb_pull(skb, hdrlen); | 
|  |  | 
|  | if (!ehdr) | 
|  | ehdr = skb_push(skb, sizeof(struct ethhdr)); | 
|  | memcpy(ehdr, &tmp, sizeof(tmp)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_data_to_8023_exthdr); | 
|  |  | 
|  | static void | 
|  | __frame_add_frag(struct sk_buff *skb, struct page *page, | 
|  | void *ptr, int len, int size) | 
|  | { | 
|  | struct skb_shared_info *sh = skb_shinfo(skb); | 
|  | int page_offset; | 
|  |  | 
|  | get_page(page); | 
|  | page_offset = ptr - page_address(page); | 
|  | skb_add_rx_frag(skb, sh->nr_frags, page, page_offset, len, size); | 
|  | } | 
|  |  | 
|  | static void | 
|  | __ieee80211_amsdu_copy_frag(struct sk_buff *skb, struct sk_buff *frame, | 
|  | int offset, int len) | 
|  | { | 
|  | struct skb_shared_info *sh = skb_shinfo(skb); | 
|  | const skb_frag_t *frag = &sh->frags[0]; | 
|  | struct page *frag_page; | 
|  | void *frag_ptr; | 
|  | int frag_len, frag_size; | 
|  | int head_size = skb->len - skb->data_len; | 
|  | int cur_len; | 
|  |  | 
|  | frag_page = virt_to_head_page(skb->head); | 
|  | frag_ptr = skb->data; | 
|  | frag_size = head_size; | 
|  |  | 
|  | while (offset >= frag_size) { | 
|  | offset -= frag_size; | 
|  | frag_page = skb_frag_page(frag); | 
|  | frag_ptr = skb_frag_address(frag); | 
|  | frag_size = skb_frag_size(frag); | 
|  | frag++; | 
|  | } | 
|  |  | 
|  | frag_ptr += offset; | 
|  | frag_len = frag_size - offset; | 
|  |  | 
|  | cur_len = min(len, frag_len); | 
|  |  | 
|  | __frame_add_frag(frame, frag_page, frag_ptr, cur_len, frag_size); | 
|  | len -= cur_len; | 
|  |  | 
|  | while (len > 0) { | 
|  | frag_len = skb_frag_size(frag); | 
|  | cur_len = min(len, frag_len); | 
|  | __frame_add_frag(frame, skb_frag_page(frag), | 
|  | skb_frag_address(frag), cur_len, frag_len); | 
|  | len -= cur_len; | 
|  | frag++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct sk_buff * | 
|  | __ieee80211_amsdu_copy(struct sk_buff *skb, unsigned int hlen, | 
|  | int offset, int len, bool reuse_frag) | 
|  | { | 
|  | struct sk_buff *frame; | 
|  | int cur_len = len; | 
|  |  | 
|  | if (skb->len - offset < len) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * When reusing framents, copy some data to the head to simplify | 
|  | * ethernet header handling and speed up protocol header processing | 
|  | * in the stack later. | 
|  | */ | 
|  | if (reuse_frag) | 
|  | cur_len = min_t(int, len, 32); | 
|  |  | 
|  | /* | 
|  | * Allocate and reserve two bytes more for payload | 
|  | * alignment since sizeof(struct ethhdr) is 14. | 
|  | */ | 
|  | frame = dev_alloc_skb(hlen + sizeof(struct ethhdr) + 2 + cur_len); | 
|  | if (!frame) | 
|  | return NULL; | 
|  |  | 
|  | skb_reserve(frame, hlen + sizeof(struct ethhdr) + 2); | 
|  | skb_copy_bits(skb, offset, skb_put(frame, cur_len), cur_len); | 
|  |  | 
|  | len -= cur_len; | 
|  | if (!len) | 
|  | return frame; | 
|  |  | 
|  | offset += cur_len; | 
|  | __ieee80211_amsdu_copy_frag(skb, frame, offset, len); | 
|  |  | 
|  | return frame; | 
|  | } | 
|  |  | 
|  | void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, | 
|  | const u8 *addr, enum nl80211_iftype iftype, | 
|  | const unsigned int extra_headroom, | 
|  | const u8 *check_da, const u8 *check_sa) | 
|  | { | 
|  | unsigned int hlen = ALIGN(extra_headroom, 4); | 
|  | struct sk_buff *frame = NULL; | 
|  | u16 ethertype; | 
|  | u8 *payload; | 
|  | int offset = 0, remaining; | 
|  | struct ethhdr eth; | 
|  | bool reuse_frag = skb->head_frag && !skb_has_frag_list(skb); | 
|  | bool reuse_skb = false; | 
|  | bool last = false; | 
|  |  | 
|  | while (!last) { | 
|  | unsigned int subframe_len; | 
|  | int len; | 
|  | u8 padding; | 
|  |  | 
|  | skb_copy_bits(skb, offset, ð, sizeof(eth)); | 
|  | len = ntohs(eth.h_proto); | 
|  | subframe_len = sizeof(struct ethhdr) + len; | 
|  | padding = (4 - subframe_len) & 0x3; | 
|  |  | 
|  | /* the last MSDU has no padding */ | 
|  | remaining = skb->len - offset; | 
|  | if (subframe_len > remaining) | 
|  | goto purge; | 
|  | /* mitigate A-MSDU aggregation injection attacks */ | 
|  | if (ether_addr_equal(eth.h_dest, rfc1042_header)) | 
|  | goto purge; | 
|  |  | 
|  | offset += sizeof(struct ethhdr); | 
|  | last = remaining <= subframe_len + padding; | 
|  |  | 
|  | /* FIXME: should we really accept multicast DA? */ | 
|  | if ((check_da && !is_multicast_ether_addr(eth.h_dest) && | 
|  | !ether_addr_equal(check_da, eth.h_dest)) || | 
|  | (check_sa && !ether_addr_equal(check_sa, eth.h_source))) { | 
|  | offset += len + padding; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* reuse skb for the last subframe */ | 
|  | if (!skb_is_nonlinear(skb) && !reuse_frag && last) { | 
|  | skb_pull(skb, offset); | 
|  | frame = skb; | 
|  | reuse_skb = true; | 
|  | } else { | 
|  | frame = __ieee80211_amsdu_copy(skb, hlen, offset, len, | 
|  | reuse_frag); | 
|  | if (!frame) | 
|  | goto purge; | 
|  |  | 
|  | offset += len + padding; | 
|  | } | 
|  |  | 
|  | skb_reset_network_header(frame); | 
|  | frame->dev = skb->dev; | 
|  | frame->priority = skb->priority; | 
|  |  | 
|  | payload = frame->data; | 
|  | ethertype = (payload[6] << 8) | payload[7]; | 
|  | if (likely((ether_addr_equal(payload, rfc1042_header) && | 
|  | ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) || | 
|  | ether_addr_equal(payload, bridge_tunnel_header))) { | 
|  | eth.h_proto = htons(ethertype); | 
|  | skb_pull(frame, ETH_ALEN + 2); | 
|  | } | 
|  |  | 
|  | memcpy(skb_push(frame, sizeof(eth)), ð, sizeof(eth)); | 
|  | __skb_queue_tail(list, frame); | 
|  | } | 
|  |  | 
|  | if (!reuse_skb) | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | return; | 
|  |  | 
|  | purge: | 
|  | __skb_queue_purge(list); | 
|  | dev_kfree_skb(skb); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_amsdu_to_8023s); | 
|  |  | 
|  | /* Given a data frame determine the 802.1p/1d tag to use. */ | 
|  | unsigned int cfg80211_classify8021d(struct sk_buff *skb, | 
|  | struct cfg80211_qos_map *qos_map) | 
|  | { | 
|  | unsigned int dscp; | 
|  | unsigned char vlan_priority; | 
|  | unsigned int ret; | 
|  |  | 
|  | /* skb->priority values from 256->263 are magic values to | 
|  | * directly indicate a specific 802.1d priority.  This is used | 
|  | * to allow 802.1d priority to be passed directly in from VLAN | 
|  | * tags, etc. | 
|  | */ | 
|  | if (skb->priority >= 256 && skb->priority <= 263) { | 
|  | ret = skb->priority - 256; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (skb_vlan_tag_present(skb)) { | 
|  | vlan_priority = (skb_vlan_tag_get(skb) & VLAN_PRIO_MASK) | 
|  | >> VLAN_PRIO_SHIFT; | 
|  | if (vlan_priority > 0) { | 
|  | ret = vlan_priority; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (skb->protocol) { | 
|  | case htons(ETH_P_IP): | 
|  | dscp = ipv4_get_dsfield(ip_hdr(skb)) & 0xfc; | 
|  | break; | 
|  | case htons(ETH_P_IPV6): | 
|  | dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & 0xfc; | 
|  | break; | 
|  | case htons(ETH_P_MPLS_UC): | 
|  | case htons(ETH_P_MPLS_MC): { | 
|  | struct mpls_label mpls_tmp, *mpls; | 
|  |  | 
|  | mpls = skb_header_pointer(skb, sizeof(struct ethhdr), | 
|  | sizeof(*mpls), &mpls_tmp); | 
|  | if (!mpls) | 
|  | return 0; | 
|  |  | 
|  | ret = (ntohl(mpls->entry) & MPLS_LS_TC_MASK) | 
|  | >> MPLS_LS_TC_SHIFT; | 
|  | goto out; | 
|  | } | 
|  | case htons(ETH_P_80221): | 
|  | /* 802.21 is always network control traffic */ | 
|  | return 7; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (qos_map) { | 
|  | unsigned int i, tmp_dscp = dscp >> 2; | 
|  |  | 
|  | for (i = 0; i < qos_map->num_des; i++) { | 
|  | if (tmp_dscp == qos_map->dscp_exception[i].dscp) { | 
|  | ret = qos_map->dscp_exception[i].up; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 8; i++) { | 
|  | if (tmp_dscp >= qos_map->up[i].low && | 
|  | tmp_dscp <= qos_map->up[i].high) { | 
|  | ret = i; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = dscp >> 5; | 
|  | out: | 
|  | return array_index_nospec(ret, IEEE80211_NUM_TIDS); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_classify8021d); | 
|  |  | 
|  | const struct element *ieee80211_bss_get_elem(struct cfg80211_bss *bss, u8 id) | 
|  | { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | ies = rcu_dereference(bss->ies); | 
|  | if (!ies) | 
|  | return NULL; | 
|  |  | 
|  | return cfg80211_find_elem(id, ies->data, ies->len); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_bss_get_elem); | 
|  |  | 
|  | void cfg80211_upload_connect_keys(struct wireless_dev *wdev) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); | 
|  | struct net_device *dev = wdev->netdev; | 
|  | int i; | 
|  |  | 
|  | if (!wdev->connect_keys) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < CFG80211_MAX_WEP_KEYS; i++) { | 
|  | if (!wdev->connect_keys->params[i].cipher) | 
|  | continue; | 
|  | if (rdev_add_key(rdev, dev, i, false, NULL, | 
|  | &wdev->connect_keys->params[i])) { | 
|  | netdev_err(dev, "failed to set key %d\n", i); | 
|  | continue; | 
|  | } | 
|  | if (wdev->connect_keys->def == i && | 
|  | rdev_set_default_key(rdev, dev, i, true, true)) { | 
|  | netdev_err(dev, "failed to set defkey %d\n", i); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree_sensitive(wdev->connect_keys); | 
|  | wdev->connect_keys = NULL; | 
|  | } | 
|  |  | 
|  | void cfg80211_process_wdev_events(struct wireless_dev *wdev) | 
|  | { | 
|  | struct cfg80211_event *ev; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdev->event_lock, flags); | 
|  | while (!list_empty(&wdev->event_list)) { | 
|  | ev = list_first_entry(&wdev->event_list, | 
|  | struct cfg80211_event, list); | 
|  | list_del(&ev->list); | 
|  | spin_unlock_irqrestore(&wdev->event_lock, flags); | 
|  |  | 
|  | wdev_lock(wdev); | 
|  | switch (ev->type) { | 
|  | case EVENT_CONNECT_RESULT: | 
|  | __cfg80211_connect_result( | 
|  | wdev->netdev, | 
|  | &ev->cr, | 
|  | ev->cr.status == WLAN_STATUS_SUCCESS); | 
|  | break; | 
|  | case EVENT_ROAMED: | 
|  | __cfg80211_roamed(wdev, &ev->rm); | 
|  | break; | 
|  | case EVENT_DISCONNECTED: | 
|  | __cfg80211_disconnected(wdev->netdev, | 
|  | ev->dc.ie, ev->dc.ie_len, | 
|  | ev->dc.reason, | 
|  | !ev->dc.locally_generated); | 
|  | break; | 
|  | case EVENT_IBSS_JOINED: | 
|  | __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid, | 
|  | ev->ij.channel); | 
|  | break; | 
|  | case EVENT_STOPPED: | 
|  | __cfg80211_leave(wiphy_to_rdev(wdev->wiphy), wdev); | 
|  | break; | 
|  | case EVENT_PORT_AUTHORIZED: | 
|  | __cfg80211_port_authorized(wdev, ev->pa.bssid); | 
|  | break; | 
|  | } | 
|  | wdev_unlock(wdev); | 
|  |  | 
|  | kfree(ev); | 
|  |  | 
|  | spin_lock_irqsave(&wdev->event_lock, flags); | 
|  | } | 
|  | spin_unlock_irqrestore(&wdev->event_lock, flags); | 
|  | } | 
|  |  | 
|  | void cfg80211_process_rdev_events(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) | 
|  | cfg80211_process_wdev_events(wdev); | 
|  | } | 
|  |  | 
|  | int cfg80211_change_iface(struct cfg80211_registered_device *rdev, | 
|  | struct net_device *dev, enum nl80211_iftype ntype, | 
|  | struct vif_params *params) | 
|  | { | 
|  | int err; | 
|  | enum nl80211_iftype otype = dev->ieee80211_ptr->iftype; | 
|  |  | 
|  | lockdep_assert_held(&rdev->wiphy.mtx); | 
|  |  | 
|  | /* don't support changing VLANs, you just re-create them */ | 
|  | if (otype == NL80211_IFTYPE_AP_VLAN) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | /* cannot change into P2P device or NAN */ | 
|  | if (ntype == NL80211_IFTYPE_P2P_DEVICE || | 
|  | ntype == NL80211_IFTYPE_NAN) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (!rdev->ops->change_virtual_intf || | 
|  | !(rdev->wiphy.interface_modes & (1 << ntype))) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | if (ntype != otype) { | 
|  | /* if it's part of a bridge, reject changing type to station/ibss */ | 
|  | if (netif_is_bridge_port(dev) && | 
|  | (ntype == NL80211_IFTYPE_ADHOC || | 
|  | ntype == NL80211_IFTYPE_STATION || | 
|  | ntype == NL80211_IFTYPE_P2P_CLIENT)) | 
|  | return -EBUSY; | 
|  |  | 
|  | dev->ieee80211_ptr->use_4addr = false; | 
|  | dev->ieee80211_ptr->mesh_id_up_len = 0; | 
|  | wdev_lock(dev->ieee80211_ptr); | 
|  | rdev_set_qos_map(rdev, dev, NULL); | 
|  | wdev_unlock(dev->ieee80211_ptr); | 
|  |  | 
|  | switch (otype) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | cfg80211_stop_ap(rdev, dev, true); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | cfg80211_leave_ibss(rdev, dev, false); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | wdev_lock(dev->ieee80211_ptr); | 
|  | cfg80211_disconnect(rdev, dev, | 
|  | WLAN_REASON_DEAUTH_LEAVING, true); | 
|  | wdev_unlock(dev->ieee80211_ptr); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | /* mesh should be handled? */ | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | cfg80211_leave_ocb(rdev, dev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | cfg80211_process_rdev_events(rdev); | 
|  | cfg80211_mlme_purge_registrations(dev->ieee80211_ptr); | 
|  | } | 
|  |  | 
|  | err = rdev_change_virtual_intf(rdev, dev, ntype, params); | 
|  |  | 
|  | WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype); | 
|  |  | 
|  | if (!err && params && params->use_4addr != -1) | 
|  | dev->ieee80211_ptr->use_4addr = params->use_4addr; | 
|  |  | 
|  | if (!err) { | 
|  | dev->priv_flags &= ~IFF_DONT_BRIDGE; | 
|  | switch (ntype) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (dev->ieee80211_ptr->use_4addr) | 
|  | break; | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | dev->priv_flags |= IFF_DONT_BRIDGE; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | /* bridging OK */ | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* monitor can't bridge anyway */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | /* not happening */ | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NL80211_IFTYPE_NAN: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!err && ntype != otype && netif_running(dev)) { | 
|  | cfg80211_update_iface_num(rdev, ntype, 1); | 
|  | cfg80211_update_iface_num(rdev, otype, -1); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_ht(struct rate_info *rate) | 
|  | { | 
|  | int modulation, streams, bitrate; | 
|  |  | 
|  | /* the formula below does only work for MCS values smaller than 32 */ | 
|  | if (WARN_ON_ONCE(rate->mcs >= 32)) | 
|  | return 0; | 
|  |  | 
|  | modulation = rate->mcs & 7; | 
|  | streams = (rate->mcs >> 3) + 1; | 
|  |  | 
|  | bitrate = (rate->bw == RATE_INFO_BW_40) ? 13500000 : 6500000; | 
|  |  | 
|  | if (modulation < 4) | 
|  | bitrate *= (modulation + 1); | 
|  | else if (modulation == 4) | 
|  | bitrate *= (modulation + 2); | 
|  | else | 
|  | bitrate *= (modulation + 3); | 
|  |  | 
|  | bitrate *= streams; | 
|  |  | 
|  | if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) | 
|  | bitrate = (bitrate / 9) * 10; | 
|  |  | 
|  | /* do NOT round down here */ | 
|  | return (bitrate + 50000) / 100000; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_dmg(struct rate_info *rate) | 
|  | { | 
|  | static const u32 __mcs2bitrate[] = { | 
|  | /* control PHY */ | 
|  | [0] =   275, | 
|  | /* SC PHY */ | 
|  | [1] =  3850, | 
|  | [2] =  7700, | 
|  | [3] =  9625, | 
|  | [4] = 11550, | 
|  | [5] = 12512, /* 1251.25 mbps */ | 
|  | [6] = 15400, | 
|  | [7] = 19250, | 
|  | [8] = 23100, | 
|  | [9] = 25025, | 
|  | [10] = 30800, | 
|  | [11] = 38500, | 
|  | [12] = 46200, | 
|  | /* OFDM PHY */ | 
|  | [13] =  6930, | 
|  | [14] =  8662, /* 866.25 mbps */ | 
|  | [15] = 13860, | 
|  | [16] = 17325, | 
|  | [17] = 20790, | 
|  | [18] = 27720, | 
|  | [19] = 34650, | 
|  | [20] = 41580, | 
|  | [21] = 45045, | 
|  | [22] = 51975, | 
|  | [23] = 62370, | 
|  | [24] = 67568, /* 6756.75 mbps */ | 
|  | /* LP-SC PHY */ | 
|  | [25] =  6260, | 
|  | [26] =  8340, | 
|  | [27] = 11120, | 
|  | [28] = 12510, | 
|  | [29] = 16680, | 
|  | [30] = 22240, | 
|  | [31] = 25030, | 
|  | }; | 
|  |  | 
|  | if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate))) | 
|  | return 0; | 
|  |  | 
|  | return __mcs2bitrate[rate->mcs]; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_extended_sc_dmg(struct rate_info *rate) | 
|  | { | 
|  | static const u32 __mcs2bitrate[] = { | 
|  | [6 - 6] = 26950, /* MCS 9.1 : 2695.0 mbps */ | 
|  | [7 - 6] = 50050, /* MCS 12.1 */ | 
|  | [8 - 6] = 53900, | 
|  | [9 - 6] = 57750, | 
|  | [10 - 6] = 63900, | 
|  | [11 - 6] = 75075, | 
|  | [12 - 6] = 80850, | 
|  | }; | 
|  |  | 
|  | /* Extended SC MCS not defined for base MCS below 6 or above 12 */ | 
|  | if (WARN_ON_ONCE(rate->mcs < 6 || rate->mcs > 12)) | 
|  | return 0; | 
|  |  | 
|  | return __mcs2bitrate[rate->mcs - 6]; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_edmg(struct rate_info *rate) | 
|  | { | 
|  | static const u32 __mcs2bitrate[] = { | 
|  | /* control PHY */ | 
|  | [0] =   275, | 
|  | /* SC PHY */ | 
|  | [1] =  3850, | 
|  | [2] =  7700, | 
|  | [3] =  9625, | 
|  | [4] = 11550, | 
|  | [5] = 12512, /* 1251.25 mbps */ | 
|  | [6] = 13475, | 
|  | [7] = 15400, | 
|  | [8] = 19250, | 
|  | [9] = 23100, | 
|  | [10] = 25025, | 
|  | [11] = 26950, | 
|  | [12] = 30800, | 
|  | [13] = 38500, | 
|  | [14] = 46200, | 
|  | [15] = 50050, | 
|  | [16] = 53900, | 
|  | [17] = 57750, | 
|  | [18] = 69300, | 
|  | [19] = 75075, | 
|  | [20] = 80850, | 
|  | }; | 
|  |  | 
|  | if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate))) | 
|  | return 0; | 
|  |  | 
|  | return __mcs2bitrate[rate->mcs] * rate->n_bonded_ch; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) | 
|  | { | 
|  | static const u32 base[4][12] = { | 
|  | {   6500000, | 
|  | 13000000, | 
|  | 19500000, | 
|  | 26000000, | 
|  | 39000000, | 
|  | 52000000, | 
|  | 58500000, | 
|  | 65000000, | 
|  | 78000000, | 
|  | /* not in the spec, but some devices use this: */ | 
|  | 86700000, | 
|  | 97500000, | 
|  | 108300000, | 
|  | }, | 
|  | {  13500000, | 
|  | 27000000, | 
|  | 40500000, | 
|  | 54000000, | 
|  | 81000000, | 
|  | 108000000, | 
|  | 121500000, | 
|  | 135000000, | 
|  | 162000000, | 
|  | 180000000, | 
|  | 202500000, | 
|  | 225000000, | 
|  | }, | 
|  | {  29300000, | 
|  | 58500000, | 
|  | 87800000, | 
|  | 117000000, | 
|  | 175500000, | 
|  | 234000000, | 
|  | 263300000, | 
|  | 292500000, | 
|  | 351000000, | 
|  | 390000000, | 
|  | 438800000, | 
|  | 487500000, | 
|  | }, | 
|  | {  58500000, | 
|  | 117000000, | 
|  | 175500000, | 
|  | 234000000, | 
|  | 351000000, | 
|  | 468000000, | 
|  | 526500000, | 
|  | 585000000, | 
|  | 702000000, | 
|  | 780000000, | 
|  | 877500000, | 
|  | 975000000, | 
|  | }, | 
|  | }; | 
|  | u32 bitrate; | 
|  | int idx; | 
|  |  | 
|  | if (rate->mcs > 11) | 
|  | goto warn; | 
|  |  | 
|  | switch (rate->bw) { | 
|  | case RATE_INFO_BW_160: | 
|  | idx = 3; | 
|  | break; | 
|  | case RATE_INFO_BW_80: | 
|  | idx = 2; | 
|  | break; | 
|  | case RATE_INFO_BW_40: | 
|  | idx = 1; | 
|  | break; | 
|  | case RATE_INFO_BW_5: | 
|  | case RATE_INFO_BW_10: | 
|  | default: | 
|  | goto warn; | 
|  | case RATE_INFO_BW_20: | 
|  | idx = 0; | 
|  | } | 
|  |  | 
|  | bitrate = base[idx][rate->mcs]; | 
|  | bitrate *= rate->nss; | 
|  |  | 
|  | if (rate->flags & RATE_INFO_FLAGS_SHORT_GI) | 
|  | bitrate = (bitrate / 9) * 10; | 
|  |  | 
|  | /* do NOT round down here */ | 
|  | return (bitrate + 50000) / 100000; | 
|  | warn: | 
|  | WARN_ONCE(1, "invalid rate bw=%d, mcs=%d, nss=%d\n", | 
|  | rate->bw, rate->mcs, rate->nss); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate) | 
|  | { | 
|  | #define SCALE 6144 | 
|  | u32 mcs_divisors[14] = { | 
|  | 102399, /* 16.666666... */ | 
|  | 51201, /*  8.333333... */ | 
|  | 34134, /*  5.555555... */ | 
|  | 25599, /*  4.166666... */ | 
|  | 17067, /*  2.777777... */ | 
|  | 12801, /*  2.083333... */ | 
|  | 11769, /*  1.851851... */ | 
|  | 10239, /*  1.666666... */ | 
|  | 8532, /*  1.388888... */ | 
|  | 7680, /*  1.250000... */ | 
|  | 6828, /*  1.111111... */ | 
|  | 6144, /*  1.000000... */ | 
|  | 5690, /*  0.926106... */ | 
|  | 5120, /*  0.833333... */ | 
|  | }; | 
|  | u32 rates_160M[3] = { 960777777, 907400000, 816666666 }; | 
|  | u32 rates_969[3] =  { 480388888, 453700000, 408333333 }; | 
|  | u32 rates_484[3] =  { 229411111, 216666666, 195000000 }; | 
|  | u32 rates_242[3] =  { 114711111, 108333333,  97500000 }; | 
|  | u32 rates_106[3] =  {  40000000,  37777777,  34000000 }; | 
|  | u32 rates_52[3]  =  {  18820000,  17777777,  16000000 }; | 
|  | u32 rates_26[3]  =  {   9411111,   8888888,   8000000 }; | 
|  | u64 tmp; | 
|  | u32 result; | 
|  |  | 
|  | if (WARN_ON_ONCE(rate->mcs > 13)) | 
|  | return 0; | 
|  |  | 
|  | if (WARN_ON_ONCE(rate->he_gi > NL80211_RATE_INFO_HE_GI_3_2)) | 
|  | return 0; | 
|  | if (WARN_ON_ONCE(rate->he_ru_alloc > | 
|  | NL80211_RATE_INFO_HE_RU_ALLOC_2x996)) | 
|  | return 0; | 
|  | if (WARN_ON_ONCE(rate->nss < 1 || rate->nss > 8)) | 
|  | return 0; | 
|  |  | 
|  | if (rate->bw == RATE_INFO_BW_160) | 
|  | result = rates_160M[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_80 || | 
|  | (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_996)) | 
|  | result = rates_969[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_40 || | 
|  | (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_484)) | 
|  | result = rates_484[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_20 || | 
|  | (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_242)) | 
|  | result = rates_242[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_106) | 
|  | result = rates_106[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_52) | 
|  | result = rates_52[rate->he_gi]; | 
|  | else if (rate->bw == RATE_INFO_BW_HE_RU && | 
|  | rate->he_ru_alloc == NL80211_RATE_INFO_HE_RU_ALLOC_26) | 
|  | result = rates_26[rate->he_gi]; | 
|  | else { | 
|  | WARN(1, "invalid HE MCS: bw:%d, ru:%d\n", | 
|  | rate->bw, rate->he_ru_alloc); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* now scale to the appropriate MCS */ | 
|  | tmp = result; | 
|  | tmp *= SCALE; | 
|  | do_div(tmp, mcs_divisors[rate->mcs]); | 
|  | result = tmp; | 
|  |  | 
|  | /* and take NSS, DCM into account */ | 
|  | result = (result * rate->nss) / 8; | 
|  | if (rate->he_dcm) | 
|  | result /= 2; | 
|  |  | 
|  | return result / 10000; | 
|  | } | 
|  |  | 
|  | u32 cfg80211_calculate_bitrate(struct rate_info *rate) | 
|  | { | 
|  | if (rate->flags & RATE_INFO_FLAGS_MCS) | 
|  | return cfg80211_calculate_bitrate_ht(rate); | 
|  | if (rate->flags & RATE_INFO_FLAGS_DMG) | 
|  | return cfg80211_calculate_bitrate_dmg(rate); | 
|  | if (rate->flags & RATE_INFO_FLAGS_EXTENDED_SC_DMG) | 
|  | return cfg80211_calculate_bitrate_extended_sc_dmg(rate); | 
|  | if (rate->flags & RATE_INFO_FLAGS_EDMG) | 
|  | return cfg80211_calculate_bitrate_edmg(rate); | 
|  | if (rate->flags & RATE_INFO_FLAGS_VHT_MCS) | 
|  | return cfg80211_calculate_bitrate_vht(rate); | 
|  | if (rate->flags & RATE_INFO_FLAGS_HE_MCS) | 
|  | return cfg80211_calculate_bitrate_he(rate); | 
|  |  | 
|  | return rate->legacy; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_calculate_bitrate); | 
|  |  | 
|  | int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, | 
|  | enum ieee80211_p2p_attr_id attr, | 
|  | u8 *buf, unsigned int bufsize) | 
|  | { | 
|  | u8 *out = buf; | 
|  | u16 attr_remaining = 0; | 
|  | bool desired_attr = false; | 
|  | u16 desired_len = 0; | 
|  |  | 
|  | while (len > 0) { | 
|  | unsigned int iedatalen; | 
|  | unsigned int copy; | 
|  | const u8 *iedata; | 
|  |  | 
|  | if (len < 2) | 
|  | return -EILSEQ; | 
|  | iedatalen = ies[1]; | 
|  | if (iedatalen + 2 > len) | 
|  | return -EILSEQ; | 
|  |  | 
|  | if (ies[0] != WLAN_EID_VENDOR_SPECIFIC) | 
|  | goto cont; | 
|  |  | 
|  | if (iedatalen < 4) | 
|  | goto cont; | 
|  |  | 
|  | iedata = ies + 2; | 
|  |  | 
|  | /* check WFA OUI, P2P subtype */ | 
|  | if (iedata[0] != 0x50 || iedata[1] != 0x6f || | 
|  | iedata[2] != 0x9a || iedata[3] != 0x09) | 
|  | goto cont; | 
|  |  | 
|  | iedatalen -= 4; | 
|  | iedata += 4; | 
|  |  | 
|  | /* check attribute continuation into this IE */ | 
|  | copy = min_t(unsigned int, attr_remaining, iedatalen); | 
|  | if (copy && desired_attr) { | 
|  | desired_len += copy; | 
|  | if (out) { | 
|  | memcpy(out, iedata, min(bufsize, copy)); | 
|  | out += min(bufsize, copy); | 
|  | bufsize -= min(bufsize, copy); | 
|  | } | 
|  |  | 
|  |  | 
|  | if (copy == attr_remaining) | 
|  | return desired_len; | 
|  | } | 
|  |  | 
|  | attr_remaining -= copy; | 
|  | if (attr_remaining) | 
|  | goto cont; | 
|  |  | 
|  | iedatalen -= copy; | 
|  | iedata += copy; | 
|  |  | 
|  | while (iedatalen > 0) { | 
|  | u16 attr_len; | 
|  |  | 
|  | /* P2P attribute ID & size must fit */ | 
|  | if (iedatalen < 3) | 
|  | return -EILSEQ; | 
|  | desired_attr = iedata[0] == attr; | 
|  | attr_len = get_unaligned_le16(iedata + 1); | 
|  | iedatalen -= 3; | 
|  | iedata += 3; | 
|  |  | 
|  | copy = min_t(unsigned int, attr_len, iedatalen); | 
|  |  | 
|  | if (desired_attr) { | 
|  | desired_len += copy; | 
|  | if (out) { | 
|  | memcpy(out, iedata, min(bufsize, copy)); | 
|  | out += min(bufsize, copy); | 
|  | bufsize -= min(bufsize, copy); | 
|  | } | 
|  |  | 
|  | if (copy == attr_len) | 
|  | return desired_len; | 
|  | } | 
|  |  | 
|  | iedata += copy; | 
|  | iedatalen -= copy; | 
|  | attr_remaining = attr_len - copy; | 
|  | } | 
|  |  | 
|  | cont: | 
|  | len -= ies[1] + 2; | 
|  | ies += ies[1] + 2; | 
|  | } | 
|  |  | 
|  | if (attr_remaining && desired_attr) | 
|  | return -EILSEQ; | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_get_p2p_attr); | 
|  |  | 
|  | static bool ieee80211_id_in_list(const u8 *ids, int n_ids, u8 id, bool id_ext) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Make sure array values are legal */ | 
|  | if (WARN_ON(ids[n_ids - 1] == WLAN_EID_EXTENSION)) | 
|  | return false; | 
|  |  | 
|  | i = 0; | 
|  | while (i < n_ids) { | 
|  | if (ids[i] == WLAN_EID_EXTENSION) { | 
|  | if (id_ext && (ids[i + 1] == id)) | 
|  | return true; | 
|  |  | 
|  | i += 2; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (ids[i] == id && !id_ext) | 
|  | return true; | 
|  |  | 
|  | i++; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static size_t skip_ie(const u8 *ies, size_t ielen, size_t pos) | 
|  | { | 
|  | /* we assume a validly formed IEs buffer */ | 
|  | u8 len = ies[pos + 1]; | 
|  |  | 
|  | pos += 2 + len; | 
|  |  | 
|  | /* the IE itself must have 255 bytes for fragments to follow */ | 
|  | if (len < 255) | 
|  | return pos; | 
|  |  | 
|  | while (pos < ielen && ies[pos] == WLAN_EID_FRAGMENT) { | 
|  | len = ies[pos + 1]; | 
|  | pos += 2 + len; | 
|  | } | 
|  |  | 
|  | return pos; | 
|  | } | 
|  |  | 
|  | size_t ieee80211_ie_split_ric(const u8 *ies, size_t ielen, | 
|  | const u8 *ids, int n_ids, | 
|  | const u8 *after_ric, int n_after_ric, | 
|  | size_t offset) | 
|  | { | 
|  | size_t pos = offset; | 
|  |  | 
|  | while (pos < ielen) { | 
|  | u8 ext = 0; | 
|  |  | 
|  | if (ies[pos] == WLAN_EID_EXTENSION) | 
|  | ext = 2; | 
|  | if ((pos + ext) >= ielen) | 
|  | break; | 
|  |  | 
|  | if (!ieee80211_id_in_list(ids, n_ids, ies[pos + ext], | 
|  | ies[pos] == WLAN_EID_EXTENSION)) | 
|  | break; | 
|  |  | 
|  | if (ies[pos] == WLAN_EID_RIC_DATA && n_after_ric) { | 
|  | pos = skip_ie(ies, ielen, pos); | 
|  |  | 
|  | while (pos < ielen) { | 
|  | if (ies[pos] == WLAN_EID_EXTENSION) | 
|  | ext = 2; | 
|  | else | 
|  | ext = 0; | 
|  |  | 
|  | if ((pos + ext) >= ielen) | 
|  | break; | 
|  |  | 
|  | if (!ieee80211_id_in_list(after_ric, | 
|  | n_after_ric, | 
|  | ies[pos + ext], | 
|  | ext == 2)) | 
|  | pos = skip_ie(ies, ielen, pos); | 
|  | else | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | pos = skip_ie(ies, ielen, pos); | 
|  | } | 
|  | } | 
|  |  | 
|  | return pos; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_ie_split_ric); | 
|  |  | 
|  | bool ieee80211_operating_class_to_band(u8 operating_class, | 
|  | enum nl80211_band *band) | 
|  | { | 
|  | switch (operating_class) { | 
|  | case 112: | 
|  | case 115 ... 127: | 
|  | case 128 ... 130: | 
|  | *band = NL80211_BAND_5GHZ; | 
|  | return true; | 
|  | case 131 ... 135: | 
|  | *band = NL80211_BAND_6GHZ; | 
|  | return true; | 
|  | case 81: | 
|  | case 82: | 
|  | case 83: | 
|  | case 84: | 
|  | *band = NL80211_BAND_2GHZ; | 
|  | return true; | 
|  | case 180: | 
|  | *band = NL80211_BAND_60GHZ; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_operating_class_to_band); | 
|  |  | 
|  | bool ieee80211_chandef_to_operating_class(struct cfg80211_chan_def *chandef, | 
|  | u8 *op_class) | 
|  | { | 
|  | u8 vht_opclass; | 
|  | u32 freq = chandef->center_freq1; | 
|  |  | 
|  | if (freq >= 2412 && freq <= 2472) { | 
|  | if (chandef->width > NL80211_CHAN_WIDTH_40) | 
|  | return false; | 
|  |  | 
|  | /* 2.407 GHz, channels 1..13 */ | 
|  | if (chandef->width == NL80211_CHAN_WIDTH_40) { | 
|  | if (freq > chandef->chan->center_freq) | 
|  | *op_class = 83; /* HT40+ */ | 
|  | else | 
|  | *op_class = 84; /* HT40- */ | 
|  | } else { | 
|  | *op_class = 81; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (freq == 2484) { | 
|  | /* channel 14 is only for IEEE 802.11b */ | 
|  | if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT) | 
|  | return false; | 
|  |  | 
|  | *op_class = 82; /* channel 14 */ | 
|  | return true; | 
|  | } | 
|  |  | 
|  | switch (chandef->width) { | 
|  | case NL80211_CHAN_WIDTH_80: | 
|  | vht_opclass = 128; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_160: | 
|  | vht_opclass = 129; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_80P80: | 
|  | vht_opclass = 130; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_10: | 
|  | case NL80211_CHAN_WIDTH_5: | 
|  | return false; /* unsupported for now */ | 
|  | default: | 
|  | vht_opclass = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* 5 GHz, channels 36..48 */ | 
|  | if (freq >= 5180 && freq <= 5240) { | 
|  | if (vht_opclass) { | 
|  | *op_class = vht_opclass; | 
|  | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { | 
|  | if (freq > chandef->chan->center_freq) | 
|  | *op_class = 116; | 
|  | else | 
|  | *op_class = 117; | 
|  | } else { | 
|  | *op_class = 115; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* 5 GHz, channels 52..64 */ | 
|  | if (freq >= 5260 && freq <= 5320) { | 
|  | if (vht_opclass) { | 
|  | *op_class = vht_opclass; | 
|  | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { | 
|  | if (freq > chandef->chan->center_freq) | 
|  | *op_class = 119; | 
|  | else | 
|  | *op_class = 120; | 
|  | } else { | 
|  | *op_class = 118; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* 5 GHz, channels 100..144 */ | 
|  | if (freq >= 5500 && freq <= 5720) { | 
|  | if (vht_opclass) { | 
|  | *op_class = vht_opclass; | 
|  | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { | 
|  | if (freq > chandef->chan->center_freq) | 
|  | *op_class = 122; | 
|  | else | 
|  | *op_class = 123; | 
|  | } else { | 
|  | *op_class = 121; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* 5 GHz, channels 149..169 */ | 
|  | if (freq >= 5745 && freq <= 5845) { | 
|  | if (vht_opclass) { | 
|  | *op_class = vht_opclass; | 
|  | } else if (chandef->width == NL80211_CHAN_WIDTH_40) { | 
|  | if (freq > chandef->chan->center_freq) | 
|  | *op_class = 126; | 
|  | else | 
|  | *op_class = 127; | 
|  | } else if (freq <= 5805) { | 
|  | *op_class = 124; | 
|  | } else { | 
|  | *op_class = 125; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* 56.16 GHz, channel 1..4 */ | 
|  | if (freq >= 56160 + 2160 * 1 && freq <= 56160 + 2160 * 6) { | 
|  | if (chandef->width >= NL80211_CHAN_WIDTH_40) | 
|  | return false; | 
|  |  | 
|  | *op_class = 180; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* not supported yet */ | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_chandef_to_operating_class); | 
|  |  | 
|  | static void cfg80211_calculate_bi_data(struct wiphy *wiphy, u32 new_beacon_int, | 
|  | u32 *beacon_int_gcd, | 
|  | bool *beacon_int_different) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | *beacon_int_gcd = 0; | 
|  | *beacon_int_different = false; | 
|  |  | 
|  | list_for_each_entry(wdev, &wiphy->wdev_list, list) { | 
|  | if (!wdev->beacon_interval) | 
|  | continue; | 
|  |  | 
|  | if (!*beacon_int_gcd) { | 
|  | *beacon_int_gcd = wdev->beacon_interval; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (wdev->beacon_interval == *beacon_int_gcd) | 
|  | continue; | 
|  |  | 
|  | *beacon_int_different = true; | 
|  | *beacon_int_gcd = gcd(*beacon_int_gcd, wdev->beacon_interval); | 
|  | } | 
|  |  | 
|  | if (new_beacon_int && *beacon_int_gcd != new_beacon_int) { | 
|  | if (*beacon_int_gcd) | 
|  | *beacon_int_different = true; | 
|  | *beacon_int_gcd = gcd(*beacon_int_gcd, new_beacon_int); | 
|  | } | 
|  | } | 
|  |  | 
|  | int cfg80211_validate_beacon_int(struct cfg80211_registered_device *rdev, | 
|  | enum nl80211_iftype iftype, u32 beacon_int) | 
|  | { | 
|  | /* | 
|  | * This is just a basic pre-condition check; if interface combinations | 
|  | * are possible the driver must already be checking those with a call | 
|  | * to cfg80211_check_combinations(), in which case we'll validate more | 
|  | * through the cfg80211_calculate_bi_data() call and code in | 
|  | * cfg80211_iter_combinations(). | 
|  | */ | 
|  |  | 
|  | if (beacon_int < 10 || beacon_int > 10000) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int cfg80211_iter_combinations(struct wiphy *wiphy, | 
|  | struct iface_combination_params *params, | 
|  | void (*iter)(const struct ieee80211_iface_combination *c, | 
|  | void *data), | 
|  | void *data) | 
|  | { | 
|  | const struct ieee80211_regdomain *regdom; | 
|  | enum nl80211_dfs_regions region = 0; | 
|  | int i, j, iftype; | 
|  | int num_interfaces = 0; | 
|  | u32 used_iftypes = 0; | 
|  | u32 beacon_int_gcd; | 
|  | bool beacon_int_different; | 
|  |  | 
|  | /* | 
|  | * This is a bit strange, since the iteration used to rely only on | 
|  | * the data given by the driver, but here it now relies on context, | 
|  | * in form of the currently operating interfaces. | 
|  | * This is OK for all current users, and saves us from having to | 
|  | * push the GCD calculations into all the drivers. | 
|  | * In the future, this should probably rely more on data that's in | 
|  | * cfg80211 already - the only thing not would appear to be any new | 
|  | * interfaces (while being brought up) and channel/radar data. | 
|  | */ | 
|  | cfg80211_calculate_bi_data(wiphy, params->new_beacon_int, | 
|  | &beacon_int_gcd, &beacon_int_different); | 
|  |  | 
|  | if (params->radar_detect) { | 
|  | rcu_read_lock(); | 
|  | regdom = rcu_dereference(cfg80211_regdomain); | 
|  | if (regdom) | 
|  | region = regdom->dfs_region; | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { | 
|  | num_interfaces += params->iftype_num[iftype]; | 
|  | if (params->iftype_num[iftype] > 0 && | 
|  | !cfg80211_iftype_allowed(wiphy, iftype, 0, 1)) | 
|  | used_iftypes |= BIT(iftype); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < wiphy->n_iface_combinations; i++) { | 
|  | const struct ieee80211_iface_combination *c; | 
|  | struct ieee80211_iface_limit *limits; | 
|  | u32 all_iftypes = 0; | 
|  |  | 
|  | c = &wiphy->iface_combinations[i]; | 
|  |  | 
|  | if (num_interfaces > c->max_interfaces) | 
|  | continue; | 
|  | if (params->num_different_channels > c->num_different_channels) | 
|  | continue; | 
|  |  | 
|  | limits = kmemdup(c->limits, sizeof(limits[0]) * c->n_limits, | 
|  | GFP_KERNEL); | 
|  | if (!limits) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { | 
|  | if (cfg80211_iftype_allowed(wiphy, iftype, 0, 1)) | 
|  | continue; | 
|  | for (j = 0; j < c->n_limits; j++) { | 
|  | all_iftypes |= limits[j].types; | 
|  | if (!(limits[j].types & BIT(iftype))) | 
|  | continue; | 
|  | if (limits[j].max < params->iftype_num[iftype]) | 
|  | goto cont; | 
|  | limits[j].max -= params->iftype_num[iftype]; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (params->radar_detect != | 
|  | (c->radar_detect_widths & params->radar_detect)) | 
|  | goto cont; | 
|  |  | 
|  | if (params->radar_detect && c->radar_detect_regions && | 
|  | !(c->radar_detect_regions & BIT(region))) | 
|  | goto cont; | 
|  |  | 
|  | /* Finally check that all iftypes that we're currently | 
|  | * using are actually part of this combination. If they | 
|  | * aren't then we can't use this combination and have | 
|  | * to continue to the next. | 
|  | */ | 
|  | if ((all_iftypes & used_iftypes) != used_iftypes) | 
|  | goto cont; | 
|  |  | 
|  | if (beacon_int_gcd) { | 
|  | if (c->beacon_int_min_gcd && | 
|  | beacon_int_gcd < c->beacon_int_min_gcd) | 
|  | goto cont; | 
|  | if (!c->beacon_int_min_gcd && beacon_int_different) | 
|  | goto cont; | 
|  | } | 
|  |  | 
|  | /* This combination covered all interface types and | 
|  | * supported the requested numbers, so we're good. | 
|  | */ | 
|  |  | 
|  | (*iter)(c, data); | 
|  | cont: | 
|  | kfree(limits); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_iter_combinations); | 
|  |  | 
|  | static void | 
|  | cfg80211_iter_sum_ifcombs(const struct ieee80211_iface_combination *c, | 
|  | void *data) | 
|  | { | 
|  | int *num = data; | 
|  | (*num)++; | 
|  | } | 
|  |  | 
|  | int cfg80211_check_combinations(struct wiphy *wiphy, | 
|  | struct iface_combination_params *params) | 
|  | { | 
|  | int err, num = 0; | 
|  |  | 
|  | err = cfg80211_iter_combinations(wiphy, params, | 
|  | cfg80211_iter_sum_ifcombs, &num); | 
|  | if (err) | 
|  | return err; | 
|  | if (num == 0) | 
|  | return -EBUSY; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_check_combinations); | 
|  |  | 
|  | int ieee80211_get_ratemask(struct ieee80211_supported_band *sband, | 
|  | const u8 *rates, unsigned int n_rates, | 
|  | u32 *mask) | 
|  | { | 
|  | int i, j; | 
|  |  | 
|  | if (!sband) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (n_rates == 0 || n_rates > NL80211_MAX_SUPP_RATES) | 
|  | return -EINVAL; | 
|  |  | 
|  | *mask = 0; | 
|  |  | 
|  | for (i = 0; i < n_rates; i++) { | 
|  | int rate = (rates[i] & 0x7f) * 5; | 
|  | bool found = false; | 
|  |  | 
|  | for (j = 0; j < sband->n_bitrates; j++) { | 
|  | if (sband->bitrates[j].bitrate == rate) { | 
|  | found = true; | 
|  | *mask |= BIT(j); | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mask must have at least one bit set here since we | 
|  | * didn't accept a 0-length rates array nor allowed | 
|  | * entries in the array that didn't exist | 
|  | */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | unsigned int ieee80211_get_num_supported_channels(struct wiphy *wiphy) | 
|  | { | 
|  | enum nl80211_band band; | 
|  | unsigned int n_channels = 0; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) | 
|  | if (wiphy->bands[band]) | 
|  | n_channels += wiphy->bands[band]->n_channels; | 
|  |  | 
|  | return n_channels; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_num_supported_channels); | 
|  |  | 
|  | int cfg80211_get_station(struct net_device *dev, const u8 *mac_addr, | 
|  | struct station_info *sinfo) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | wdev = dev->ieee80211_ptr; | 
|  | if (!wdev) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | rdev = wiphy_to_rdev(wdev->wiphy); | 
|  | if (!rdev->ops->get_station) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | memset(sinfo, 0, sizeof(*sinfo)); | 
|  |  | 
|  | return rdev_get_station(rdev, dev, mac_addr, sinfo); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_get_station); | 
|  |  | 
|  | void cfg80211_free_nan_func(struct cfg80211_nan_func *f) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!f) | 
|  | return; | 
|  |  | 
|  | kfree(f->serv_spec_info); | 
|  | kfree(f->srf_bf); | 
|  | kfree(f->srf_macs); | 
|  | for (i = 0; i < f->num_rx_filters; i++) | 
|  | kfree(f->rx_filters[i].filter); | 
|  |  | 
|  | for (i = 0; i < f->num_tx_filters; i++) | 
|  | kfree(f->tx_filters[i].filter); | 
|  |  | 
|  | kfree(f->rx_filters); | 
|  | kfree(f->tx_filters); | 
|  | kfree(f); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_free_nan_func); | 
|  |  | 
|  | bool cfg80211_does_bw_fit_range(const struct ieee80211_freq_range *freq_range, | 
|  | u32 center_freq_khz, u32 bw_khz) | 
|  | { | 
|  | u32 start_freq_khz, end_freq_khz; | 
|  |  | 
|  | start_freq_khz = center_freq_khz - (bw_khz / 2); | 
|  | end_freq_khz = center_freq_khz + (bw_khz / 2); | 
|  |  | 
|  | if (start_freq_khz >= freq_range->start_freq_khz && | 
|  | end_freq_khz <= freq_range->end_freq_khz) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | int cfg80211_sinfo_alloc_tid_stats(struct station_info *sinfo, gfp_t gfp) | 
|  | { | 
|  | sinfo->pertid = kcalloc(IEEE80211_NUM_TIDS + 1, | 
|  | sizeof(*(sinfo->pertid)), | 
|  | gfp); | 
|  | if (!sinfo->pertid) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_sinfo_alloc_tid_stats); | 
|  |  | 
|  | /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ | 
|  | /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ | 
|  | const unsigned char rfc1042_header[] __aligned(2) = | 
|  | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; | 
|  | EXPORT_SYMBOL(rfc1042_header); | 
|  |  | 
|  | /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ | 
|  | const unsigned char bridge_tunnel_header[] __aligned(2) = | 
|  | { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; | 
|  | EXPORT_SYMBOL(bridge_tunnel_header); | 
|  |  | 
|  | /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ | 
|  | struct iapp_layer2_update { | 
|  | u8 da[ETH_ALEN];	/* broadcast */ | 
|  | u8 sa[ETH_ALEN];	/* STA addr */ | 
|  | __be16 len;		/* 6 */ | 
|  | u8 dsap;		/* 0 */ | 
|  | u8 ssap;		/* 0 */ | 
|  | u8 control; | 
|  | u8 xid_info[3]; | 
|  | } __packed; | 
|  |  | 
|  | void cfg80211_send_layer2_update(struct net_device *dev, const u8 *addr) | 
|  | { | 
|  | struct iapp_layer2_update *msg; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | /* Send Level 2 Update Frame to update forwarding tables in layer 2 | 
|  | * bridge devices */ | 
|  |  | 
|  | skb = dev_alloc_skb(sizeof(*msg)); | 
|  | if (!skb) | 
|  | return; | 
|  | msg = skb_put(skb, sizeof(*msg)); | 
|  |  | 
|  | /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) | 
|  | * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ | 
|  |  | 
|  | eth_broadcast_addr(msg->da); | 
|  | ether_addr_copy(msg->sa, addr); | 
|  | msg->len = htons(6); | 
|  | msg->dsap = 0; | 
|  | msg->ssap = 0x01;	/* NULL LSAP, CR Bit: Response */ | 
|  | msg->control = 0xaf;	/* XID response lsb.1111F101. | 
|  | * F=0 (no poll command; unsolicited frame) */ | 
|  | msg->xid_info[0] = 0x81;	/* XID format identifier */ | 
|  | msg->xid_info[1] = 1;	/* LLC types/classes: Type 1 LLC */ | 
|  | msg->xid_info[2] = 0;	/* XID sender's receive window size (RW) */ | 
|  |  | 
|  | skb->dev = dev; | 
|  | skb->protocol = eth_type_trans(skb, dev); | 
|  | memset(skb->cb, 0, sizeof(skb->cb)); | 
|  | netif_rx_ni(skb); | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_send_layer2_update); | 
|  |  | 
|  | int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, | 
|  | enum ieee80211_vht_chanwidth bw, | 
|  | int mcs, bool ext_nss_bw_capable, | 
|  | unsigned int max_vht_nss) | 
|  | { | 
|  | u16 map = le16_to_cpu(cap->supp_mcs.rx_mcs_map); | 
|  | int ext_nss_bw; | 
|  | int supp_width; | 
|  | int i, mcs_encoding; | 
|  |  | 
|  | if (map == 0xffff) | 
|  | return 0; | 
|  |  | 
|  | if (WARN_ON(mcs > 9 || max_vht_nss > 8)) | 
|  | return 0; | 
|  | if (mcs <= 7) | 
|  | mcs_encoding = 0; | 
|  | else if (mcs == 8) | 
|  | mcs_encoding = 1; | 
|  | else | 
|  | mcs_encoding = 2; | 
|  |  | 
|  | if (!max_vht_nss) { | 
|  | /* find max_vht_nss for the given MCS */ | 
|  | for (i = 7; i >= 0; i--) { | 
|  | int supp = (map >> (2 * i)) & 3; | 
|  |  | 
|  | if (supp == 3) | 
|  | continue; | 
|  |  | 
|  | if (supp >= mcs_encoding) { | 
|  | max_vht_nss = i + 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!(cap->supp_mcs.tx_mcs_map & | 
|  | cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE))) | 
|  | return max_vht_nss; | 
|  |  | 
|  | ext_nss_bw = le32_get_bits(cap->vht_cap_info, | 
|  | IEEE80211_VHT_CAP_EXT_NSS_BW_MASK); | 
|  | supp_width = le32_get_bits(cap->vht_cap_info, | 
|  | IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK); | 
|  |  | 
|  | /* if not capable, treat ext_nss_bw as 0 */ | 
|  | if (!ext_nss_bw_capable) | 
|  | ext_nss_bw = 0; | 
|  |  | 
|  | /* This is invalid */ | 
|  | if (supp_width == 3) | 
|  | return 0; | 
|  |  | 
|  | /* This is an invalid combination so pretend nothing is supported */ | 
|  | if (supp_width == 2 && (ext_nss_bw == 1 || ext_nss_bw == 2)) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Cover all the special cases according to IEEE 802.11-2016 | 
|  | * Table 9-250. All other cases are either factor of 1 or not | 
|  | * valid/supported. | 
|  | */ | 
|  | switch (bw) { | 
|  | case IEEE80211_VHT_CHANWIDTH_USE_HT: | 
|  | case IEEE80211_VHT_CHANWIDTH_80MHZ: | 
|  | if ((supp_width == 1 || supp_width == 2) && | 
|  | ext_nss_bw == 3) | 
|  | return 2 * max_vht_nss; | 
|  | break; | 
|  | case IEEE80211_VHT_CHANWIDTH_160MHZ: | 
|  | if (supp_width == 0 && | 
|  | (ext_nss_bw == 1 || ext_nss_bw == 2)) | 
|  | return max_vht_nss / 2; | 
|  | if (supp_width == 0 && | 
|  | ext_nss_bw == 3) | 
|  | return (3 * max_vht_nss) / 4; | 
|  | if (supp_width == 1 && | 
|  | ext_nss_bw == 3) | 
|  | return 2 * max_vht_nss; | 
|  | break; | 
|  | case IEEE80211_VHT_CHANWIDTH_80P80MHZ: | 
|  | if (supp_width == 0 && ext_nss_bw == 1) | 
|  | return 0; /* not possible */ | 
|  | if (supp_width == 0 && | 
|  | ext_nss_bw == 2) | 
|  | return max_vht_nss / 2; | 
|  | if (supp_width == 0 && | 
|  | ext_nss_bw == 3) | 
|  | return (3 * max_vht_nss) / 4; | 
|  | if (supp_width == 1 && | 
|  | ext_nss_bw == 0) | 
|  | return 0; /* not possible */ | 
|  | if (supp_width == 1 && | 
|  | ext_nss_bw == 1) | 
|  | return max_vht_nss / 2; | 
|  | if (supp_width == 1 && | 
|  | ext_nss_bw == 2) | 
|  | return (3 * max_vht_nss) / 4; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* not covered or invalid combination received */ | 
|  | return max_vht_nss; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee80211_get_vht_max_nss); | 
|  |  | 
|  | bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, | 
|  | bool is_4addr, u8 check_swif) | 
|  |  | 
|  | { | 
|  | bool is_vlan = iftype == NL80211_IFTYPE_AP_VLAN; | 
|  |  | 
|  | switch (check_swif) { | 
|  | case 0: | 
|  | if (is_vlan && is_4addr) | 
|  | return wiphy->flags & WIPHY_FLAG_4ADDR_AP; | 
|  | return wiphy->interface_modes & BIT(iftype); | 
|  | case 1: | 
|  | if (!(wiphy->software_iftypes & BIT(iftype)) && is_vlan) | 
|  | return wiphy->flags & WIPHY_FLAG_4ADDR_AP; | 
|  | return wiphy->software_iftypes & BIT(iftype); | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  | EXPORT_SYMBOL(cfg80211_iftype_allowed); |