| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * dell-smm-hwmon.c -- Linux driver for accessing the SMM BIOS on Dell laptops. | 
 |  * | 
 |  * Copyright (C) 2001  Massimo Dal Zotto <dz@debian.org> | 
 |  * | 
 |  * Hwmon integration: | 
 |  * Copyright (C) 2011  Jean Delvare <jdelvare@suse.de> | 
 |  * Copyright (C) 2013, 2014  Guenter Roeck <linux@roeck-us.net> | 
 |  * Copyright (C) 2014, 2015  Pali Rohár <pali@kernel.org> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/cpu.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/err.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/types.h> | 
 | #include <linux/init.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/dmi.h> | 
 | #include <linux/capability.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/io.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/ctype.h> | 
 | #include <linux/smp.h> | 
 |  | 
 | #include <linux/i8k.h> | 
 |  | 
 | #define I8K_SMM_FN_STATUS	0x0025 | 
 | #define I8K_SMM_POWER_STATUS	0x0069 | 
 | #define I8K_SMM_SET_FAN		0x01a3 | 
 | #define I8K_SMM_GET_FAN		0x00a3 | 
 | #define I8K_SMM_GET_SPEED	0x02a3 | 
 | #define I8K_SMM_GET_FAN_TYPE	0x03a3 | 
 | #define I8K_SMM_GET_NOM_SPEED	0x04a3 | 
 | #define I8K_SMM_GET_TEMP	0x10a3 | 
 | #define I8K_SMM_GET_TEMP_TYPE	0x11a3 | 
 | #define I8K_SMM_GET_DELL_SIG1	0xfea3 | 
 | #define I8K_SMM_GET_DELL_SIG2	0xffa3 | 
 |  | 
 | #define I8K_FAN_MULT		30 | 
 | #define I8K_FAN_MAX_RPM		30000 | 
 | #define I8K_MAX_TEMP		127 | 
 |  | 
 | #define I8K_FN_NONE		0x00 | 
 | #define I8K_FN_UP		0x01 | 
 | #define I8K_FN_DOWN		0x02 | 
 | #define I8K_FN_MUTE		0x04 | 
 | #define I8K_FN_MASK		0x07 | 
 | #define I8K_FN_SHIFT		8 | 
 |  | 
 | #define I8K_POWER_AC		0x05 | 
 | #define I8K_POWER_BATTERY	0x01 | 
 |  | 
 | #define DELL_SMM_NO_TEMP	10 | 
 | #define DELL_SMM_NO_FANS	3 | 
 |  | 
 | struct dell_smm_data { | 
 | 	struct mutex i8k_mutex; /* lock for sensors writes */ | 
 | 	char bios_version[4]; | 
 | 	char bios_machineid[16]; | 
 | 	uint i8k_fan_mult; | 
 | 	uint i8k_pwm_mult; | 
 | 	uint i8k_fan_max; | 
 | 	bool disallow_fan_type_call; | 
 | 	bool disallow_fan_support; | 
 | 	unsigned int manual_fan; | 
 | 	unsigned int auto_fan; | 
 | 	int temp_type[DELL_SMM_NO_TEMP]; | 
 | 	bool fan[DELL_SMM_NO_FANS]; | 
 | 	int fan_type[DELL_SMM_NO_FANS]; | 
 | }; | 
 |  | 
 | MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); | 
 | MODULE_AUTHOR("Pali Rohár <pali@kernel.org>"); | 
 | MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("i8k"); | 
 |  | 
 | static bool force; | 
 | module_param(force, bool, 0); | 
 | MODULE_PARM_DESC(force, "Force loading without checking for supported models"); | 
 |  | 
 | static bool ignore_dmi; | 
 | module_param(ignore_dmi, bool, 0); | 
 | MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); | 
 |  | 
 | #if IS_ENABLED(CONFIG_I8K) | 
 | static bool restricted = true; | 
 | module_param(restricted, bool, 0); | 
 | MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)"); | 
 |  | 
 | static bool power_status; | 
 | module_param(power_status, bool, 0600); | 
 | MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)"); | 
 | #endif | 
 |  | 
 | static uint fan_mult; | 
 | module_param(fan_mult, uint, 0); | 
 | MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with (default: autodetect)"); | 
 |  | 
 | static uint fan_max; | 
 | module_param(fan_max, uint, 0); | 
 | MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"); | 
 |  | 
 | struct smm_regs { | 
 | 	unsigned int eax; | 
 | 	unsigned int ebx __packed; | 
 | 	unsigned int ecx __packed; | 
 | 	unsigned int edx __packed; | 
 | 	unsigned int esi __packed; | 
 | 	unsigned int edi __packed; | 
 | }; | 
 |  | 
 | static const char * const temp_labels[] = { | 
 | 	"CPU", | 
 | 	"GPU", | 
 | 	"SODIMM", | 
 | 	"Other", | 
 | 	"Ambient", | 
 | 	"Other", | 
 | }; | 
 |  | 
 | static const char * const fan_labels[] = { | 
 | 	"Processor Fan", | 
 | 	"Motherboard Fan", | 
 | 	"Video Fan", | 
 | 	"Power Supply Fan", | 
 | 	"Chipset Fan", | 
 | 	"Other Fan", | 
 | }; | 
 |  | 
 | static const char * const docking_labels[] = { | 
 | 	"Docking Processor Fan", | 
 | 	"Docking Motherboard Fan", | 
 | 	"Docking Video Fan", | 
 | 	"Docking Power Supply Fan", | 
 | 	"Docking Chipset Fan", | 
 | 	"Docking Other Fan", | 
 | }; | 
 |  | 
 | static inline const char __init *i8k_get_dmi_data(int field) | 
 | { | 
 | 	const char *dmi_data = dmi_get_system_info(field); | 
 |  | 
 | 	return dmi_data && *dmi_data ? dmi_data : "?"; | 
 | } | 
 |  | 
 | /* | 
 |  * Call the System Management Mode BIOS. Code provided by Jonathan Buzzard. | 
 |  */ | 
 | static int i8k_smm_func(void *par) | 
 | { | 
 | 	ktime_t calltime = ktime_get(); | 
 | 	struct smm_regs *regs = par; | 
 | 	int eax = regs->eax; | 
 | 	int ebx = regs->ebx; | 
 | 	long long duration; | 
 | 	int rc; | 
 |  | 
 | 	/* SMM requires CPU 0 */ | 
 | 	if (smp_processor_id() != 0) | 
 | 		return -EBUSY; | 
 |  | 
 | #if defined(CONFIG_X86_64) | 
 | 	asm volatile("pushq %%rax\n\t" | 
 | 		"movl 0(%%rax),%%edx\n\t" | 
 | 		"pushq %%rdx\n\t" | 
 | 		"movl 4(%%rax),%%ebx\n\t" | 
 | 		"movl 8(%%rax),%%ecx\n\t" | 
 | 		"movl 12(%%rax),%%edx\n\t" | 
 | 		"movl 16(%%rax),%%esi\n\t" | 
 | 		"movl 20(%%rax),%%edi\n\t" | 
 | 		"popq %%rax\n\t" | 
 | 		"out %%al,$0xb2\n\t" | 
 | 		"out %%al,$0x84\n\t" | 
 | 		"xchgq %%rax,(%%rsp)\n\t" | 
 | 		"movl %%ebx,4(%%rax)\n\t" | 
 | 		"movl %%ecx,8(%%rax)\n\t" | 
 | 		"movl %%edx,12(%%rax)\n\t" | 
 | 		"movl %%esi,16(%%rax)\n\t" | 
 | 		"movl %%edi,20(%%rax)\n\t" | 
 | 		"popq %%rdx\n\t" | 
 | 		"movl %%edx,0(%%rax)\n\t" | 
 | 		"pushfq\n\t" | 
 | 		"popq %%rax\n\t" | 
 | 		"andl $1,%%eax\n" | 
 | 		: "=a"(rc) | 
 | 		:    "a"(regs) | 
 | 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); | 
 | #else | 
 | 	asm volatile("pushl %%eax\n\t" | 
 | 	    "movl 0(%%eax),%%edx\n\t" | 
 | 	    "push %%edx\n\t" | 
 | 	    "movl 4(%%eax),%%ebx\n\t" | 
 | 	    "movl 8(%%eax),%%ecx\n\t" | 
 | 	    "movl 12(%%eax),%%edx\n\t" | 
 | 	    "movl 16(%%eax),%%esi\n\t" | 
 | 	    "movl 20(%%eax),%%edi\n\t" | 
 | 	    "popl %%eax\n\t" | 
 | 	    "out %%al,$0xb2\n\t" | 
 | 	    "out %%al,$0x84\n\t" | 
 | 	    "xchgl %%eax,(%%esp)\n\t" | 
 | 	    "movl %%ebx,4(%%eax)\n\t" | 
 | 	    "movl %%ecx,8(%%eax)\n\t" | 
 | 	    "movl %%edx,12(%%eax)\n\t" | 
 | 	    "movl %%esi,16(%%eax)\n\t" | 
 | 	    "movl %%edi,20(%%eax)\n\t" | 
 | 	    "popl %%edx\n\t" | 
 | 	    "movl %%edx,0(%%eax)\n\t" | 
 | 	    "lahf\n\t" | 
 | 	    "shrl $8,%%eax\n\t" | 
 | 	    "andl $1,%%eax\n" | 
 | 	    : "=a"(rc) | 
 | 	    :    "a"(regs) | 
 | 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); | 
 | #endif | 
 | 	if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax) | 
 | 		rc = -EINVAL; | 
 |  | 
 | 	duration = ktime_us_delta(ktime_get(), calltime); | 
 | 	pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x  (took %7lld usecs)\n", eax, ebx, | 
 | 		 (rc ? 0xffff : regs->eax & 0xffff), duration); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * Call the System Management Mode BIOS. | 
 |  */ | 
 | static int i8k_smm(struct smm_regs *regs) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	cpus_read_lock(); | 
 | 	ret = smp_call_on_cpu(0, i8k_smm_func, regs, true); | 
 | 	cpus_read_unlock(); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the fan status. | 
 |  */ | 
 | static int i8k_get_fan_status(const struct dell_smm_data *data, int fan) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, }; | 
 |  | 
 | 	if (data->disallow_fan_support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	regs.ebx = fan & 0xff; | 
 | 	return i8k_smm(®s) ? : regs.eax & 0xff; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the fan speed in RPM. | 
 |  */ | 
 | static int i8k_get_fan_speed(const struct dell_smm_data *data, int fan) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, }; | 
 |  | 
 | 	if (data->disallow_fan_support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	regs.ebx = fan & 0xff; | 
 | 	return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the fan type. | 
 |  */ | 
 | static int _i8k_get_fan_type(const struct dell_smm_data *data, int fan) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; | 
 |  | 
 | 	if (data->disallow_fan_support || data->disallow_fan_type_call) | 
 | 		return -EINVAL; | 
 |  | 
 | 	regs.ebx = fan & 0xff; | 
 | 	return i8k_smm(®s) ? : regs.eax & 0xff; | 
 | } | 
 |  | 
 | static int i8k_get_fan_type(struct dell_smm_data *data, int fan) | 
 | { | 
 | 	/* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */ | 
 | 	if (data->fan_type[fan] == INT_MIN) | 
 | 		data->fan_type[fan] = _i8k_get_fan_type(data, fan); | 
 |  | 
 | 	return data->fan_type[fan]; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the fan nominal rpm for specific fan speed. | 
 |  */ | 
 | static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, int fan, int speed) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, }; | 
 |  | 
 | 	if (data->disallow_fan_support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	regs.ebx = (fan & 0xff) | (speed << 8); | 
 | 	return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; | 
 | } | 
 |  | 
 | /* | 
 |  * Enable or disable automatic BIOS fan control support | 
 |  */ | 
 | static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enable) | 
 | { | 
 | 	struct smm_regs regs = { }; | 
 |  | 
 | 	if (data->disallow_fan_support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	regs.eax = enable ? data->auto_fan : data->manual_fan; | 
 | 	return i8k_smm(®s); | 
 | } | 
 |  | 
 | /* | 
 |  * Set the fan speed (off, low, high). Returns the new fan status. | 
 |  */ | 
 | static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, }; | 
 |  | 
 | 	if (data->disallow_fan_support) | 
 | 		return -EINVAL; | 
 |  | 
 | 	speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed); | 
 | 	regs.ebx = (fan & 0xff) | (speed << 8); | 
 |  | 
 | 	return i8k_smm(®s) ? : i8k_get_fan_status(data, fan); | 
 | } | 
 |  | 
 | static int __init i8k_get_temp_type(int sensor) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, }; | 
 |  | 
 | 	regs.ebx = sensor & 0xff; | 
 | 	return i8k_smm(®s) ? : regs.eax & 0xff; | 
 | } | 
 |  | 
 | /* | 
 |  * Read the cpu temperature. | 
 |  */ | 
 | static int _i8k_get_temp(int sensor) | 
 | { | 
 | 	struct smm_regs regs = { | 
 | 		.eax = I8K_SMM_GET_TEMP, | 
 | 		.ebx = sensor & 0xff, | 
 | 	}; | 
 |  | 
 | 	return i8k_smm(®s) ? : regs.eax & 0xff; | 
 | } | 
 |  | 
 | static int i8k_get_temp(int sensor) | 
 | { | 
 | 	int temp = _i8k_get_temp(sensor); | 
 |  | 
 | 	/* | 
 | 	 * Sometimes the temperature sensor returns 0x99, which is out of range. | 
 | 	 * In this case we retry (once) before returning an error. | 
 | 	 # 1003655137 00000058 00005a4b | 
 | 	 # 1003655138 00000099 00003a80 <--- 0x99 = 153 degrees | 
 | 	 # 1003655139 00000054 00005c52 | 
 | 	 */ | 
 | 	if (temp == 0x99) { | 
 | 		msleep(100); | 
 | 		temp = _i8k_get_temp(sensor); | 
 | 	} | 
 | 	/* | 
 | 	 * Return -ENODATA for all invalid temperatures. | 
 | 	 * | 
 | 	 * Known instances are the 0x99 value as seen above as well as | 
 | 	 * 0xc1 (193), which may be returned when trying to read the GPU | 
 | 	 * temperature if the system supports a GPU and it is currently | 
 | 	 * turned off. | 
 | 	 */ | 
 | 	if (temp > I8K_MAX_TEMP) | 
 | 		return -ENODATA; | 
 |  | 
 | 	return temp; | 
 | } | 
 |  | 
 | static int __init i8k_get_dell_signature(int req_fn) | 
 | { | 
 | 	struct smm_regs regs = { .eax = req_fn, }; | 
 | 	int rc; | 
 |  | 
 | 	rc = i8k_smm(®s); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1; | 
 | } | 
 |  | 
 | #if IS_ENABLED(CONFIG_I8K) | 
 |  | 
 | /* | 
 |  * Read the Fn key status. | 
 |  */ | 
 | static int i8k_get_fn_status(void) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; | 
 | 	int rc; | 
 |  | 
 | 	rc = i8k_smm(®s); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { | 
 | 	case I8K_FN_UP: | 
 | 		return I8K_VOL_UP; | 
 | 	case I8K_FN_DOWN: | 
 | 		return I8K_VOL_DOWN; | 
 | 	case I8K_FN_MUTE: | 
 | 		return I8K_VOL_MUTE; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Read the power status. | 
 |  */ | 
 | static int i8k_get_power_status(void) | 
 | { | 
 | 	struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; | 
 | 	int rc; | 
 |  | 
 | 	rc = i8k_smm(®s); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; | 
 | } | 
 |  | 
 | /* | 
 |  * Procfs interface | 
 |  */ | 
 |  | 
 | static int | 
 | i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	int val = 0; | 
 | 	int speed; | 
 | 	unsigned char buff[16]; | 
 | 	int __user *argp = (int __user *)arg; | 
 |  | 
 | 	if (!argp) | 
 | 		return -EINVAL; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case I8K_BIOS_VERSION: | 
 | 		if (!isdigit(data->bios_version[0]) || !isdigit(data->bios_version[1]) || | 
 | 		    !isdigit(data->bios_version[2])) | 
 | 			return -EINVAL; | 
 |  | 
 | 		val = (data->bios_version[0] << 16) | | 
 | 				(data->bios_version[1] << 8) | data->bios_version[2]; | 
 | 		break; | 
 |  | 
 | 	case I8K_MACHINE_ID: | 
 | 		if (restricted && !capable(CAP_SYS_ADMIN)) | 
 | 			return -EPERM; | 
 |  | 
 | 		memset(buff, 0, sizeof(buff)); | 
 | 		strscpy(buff, data->bios_machineid, sizeof(buff)); | 
 | 		break; | 
 |  | 
 | 	case I8K_FN_STATUS: | 
 | 		val = i8k_get_fn_status(); | 
 | 		break; | 
 |  | 
 | 	case I8K_POWER_STATUS: | 
 | 		val = i8k_get_power_status(); | 
 | 		break; | 
 |  | 
 | 	case I8K_GET_TEMP: | 
 | 		val = i8k_get_temp(0); | 
 | 		break; | 
 |  | 
 | 	case I8K_GET_SPEED: | 
 | 		if (copy_from_user(&val, argp, sizeof(int))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		val = i8k_get_fan_speed(data, val); | 
 | 		break; | 
 |  | 
 | 	case I8K_GET_FAN: | 
 | 		if (copy_from_user(&val, argp, sizeof(int))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		val = i8k_get_fan_status(data, val); | 
 | 		break; | 
 |  | 
 | 	case I8K_SET_FAN: | 
 | 		if (restricted && !capable(CAP_SYS_ADMIN)) | 
 | 			return -EPERM; | 
 |  | 
 | 		if (copy_from_user(&val, argp, sizeof(int))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if (copy_from_user(&speed, argp + 1, sizeof(int))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		val = i8k_set_fan(data, val, speed); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (val < 0) | 
 | 		return val; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case I8K_BIOS_VERSION: | 
 | 		if (copy_to_user(argp, &val, 4)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		break; | 
 | 	case I8K_MACHINE_ID: | 
 | 		if (copy_to_user(argp, buff, 16)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		break; | 
 | 	default: | 
 | 		if (copy_to_user(argp, &val, sizeof(int))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct dell_smm_data *data = PDE_DATA(file_inode(fp)); | 
 | 	long ret; | 
 |  | 
 | 	mutex_lock(&data->i8k_mutex); | 
 | 	ret = i8k_ioctl_unlocked(fp, data, cmd, arg); | 
 | 	mutex_unlock(&data->i8k_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Print the information for /proc/i8k. | 
 |  */ | 
 | static int i8k_proc_show(struct seq_file *seq, void *offset) | 
 | { | 
 | 	struct dell_smm_data *data = seq->private; | 
 | 	int fn_key, cpu_temp, ac_power; | 
 | 	int left_fan, right_fan, left_speed, right_speed; | 
 |  | 
 | 	cpu_temp	= i8k_get_temp(0);				/* 11100 µs */ | 
 | 	left_fan	= i8k_get_fan_status(data, I8K_FAN_LEFT);	/*   580 µs */ | 
 | 	right_fan	= i8k_get_fan_status(data, I8K_FAN_RIGHT);	/*   580 µs */ | 
 | 	left_speed	= i8k_get_fan_speed(data, I8K_FAN_LEFT);	/*   580 µs */ | 
 | 	right_speed	= i8k_get_fan_speed(data, I8K_FAN_RIGHT);	/*   580 µs */ | 
 | 	fn_key		= i8k_get_fn_status();				/*   750 µs */ | 
 | 	if (power_status) | 
 | 		ac_power = i8k_get_power_status();			/* 14700 µs */ | 
 | 	else | 
 | 		ac_power = -1; | 
 |  | 
 | 	/* | 
 | 	 * Info: | 
 | 	 * | 
 | 	 * 1)  Format version (this will change if format changes) | 
 | 	 * 2)  BIOS version | 
 | 	 * 3)  BIOS machine ID | 
 | 	 * 4)  Cpu temperature | 
 | 	 * 5)  Left fan status | 
 | 	 * 6)  Right fan status | 
 | 	 * 7)  Left fan speed | 
 | 	 * 8)  Right fan speed | 
 | 	 * 9)  AC power | 
 | 	 * 10) Fn Key status | 
 | 	 */ | 
 | 	seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", | 
 | 		   I8K_PROC_FMT, | 
 | 		   data->bios_version, | 
 | 		   (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : data->bios_machineid, | 
 | 		   cpu_temp, | 
 | 		   left_fan, right_fan, left_speed, right_speed, | 
 | 		   ac_power, fn_key); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int i8k_open_fs(struct inode *inode, struct file *file) | 
 | { | 
 | 	return single_open(file, i8k_proc_show, PDE_DATA(inode)); | 
 | } | 
 |  | 
 | static const struct proc_ops i8k_proc_ops = { | 
 | 	.proc_open	= i8k_open_fs, | 
 | 	.proc_read	= seq_read, | 
 | 	.proc_lseek	= seq_lseek, | 
 | 	.proc_release	= single_release, | 
 | 	.proc_ioctl	= i8k_ioctl, | 
 | }; | 
 |  | 
 | static void i8k_exit_procfs(void *param) | 
 | { | 
 | 	remove_proc_entry("i8k", NULL); | 
 | } | 
 |  | 
 | static void __init i8k_init_procfs(struct device *dev) | 
 | { | 
 | 	struct dell_smm_data *data = dev_get_drvdata(dev); | 
 |  | 
 | 	/* Register the proc entry */ | 
 | 	proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data); | 
 |  | 
 | 	devm_add_action_or_reset(dev, i8k_exit_procfs, NULL); | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | static void __init i8k_init_procfs(struct device *dev) | 
 | { | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | /* | 
 |  * Hwmon interface | 
 |  */ | 
 |  | 
 | static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr, | 
 | 				   int channel) | 
 | { | 
 | 	const struct dell_smm_data *data = drvdata; | 
 |  | 
 | 	switch (type) { | 
 | 	case hwmon_temp: | 
 | 		switch (attr) { | 
 | 		case hwmon_temp_input: | 
 | 		case hwmon_temp_label: | 
 | 			if (data->temp_type[channel] >= 0) | 
 | 				return 0444; | 
 |  | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_fan: | 
 | 		if (data->disallow_fan_support) | 
 | 			break; | 
 |  | 
 | 		switch (attr) { | 
 | 		case hwmon_fan_input: | 
 | 			if (data->fan[channel]) | 
 | 				return 0444; | 
 |  | 
 | 			break; | 
 | 		case hwmon_fan_label: | 
 | 			if (data->fan[channel] && !data->disallow_fan_type_call) | 
 | 				return 0444; | 
 |  | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_pwm: | 
 | 		if (data->disallow_fan_support) | 
 | 			break; | 
 |  | 
 | 		switch (attr) { | 
 | 		case hwmon_pwm_input: | 
 | 			if (data->fan[channel]) | 
 | 				return 0644; | 
 |  | 
 | 			break; | 
 | 		case hwmon_pwm_enable: | 
 | 			if (data->auto_fan) | 
 | 				/* | 
 | 				 * There is no command for retrieve the current status | 
 | 				 * from BIOS, and userspace/firmware itself can change | 
 | 				 * it. | 
 | 				 * Thus we can only provide write-only access for now. | 
 | 				 */ | 
 | 				return 0200; | 
 |  | 
 | 			break; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int dell_smm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, | 
 | 			 long *val) | 
 | { | 
 | 	struct dell_smm_data *data = dev_get_drvdata(dev); | 
 | 	int ret; | 
 |  | 
 | 	switch (type) { | 
 | 	case hwmon_temp: | 
 | 		switch (attr) { | 
 | 		case hwmon_temp_input: | 
 | 			ret = i8k_get_temp(channel); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			*val = ret * 1000; | 
 |  | 
 | 			return 0; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_fan: | 
 | 		switch (attr) { | 
 | 		case hwmon_fan_input: | 
 | 			ret = i8k_get_fan_speed(data, channel); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			*val = ret; | 
 |  | 
 | 			return 0; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_pwm: | 
 | 		switch (attr) { | 
 | 		case hwmon_pwm_input: | 
 | 			ret = i8k_get_fan_status(data, channel); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			*val = clamp_val(ret * data->i8k_pwm_mult, 0, 255); | 
 |  | 
 | 			return 0; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | static const char *dell_smm_fan_label(struct dell_smm_data *data, int channel) | 
 | { | 
 | 	bool dock = false; | 
 | 	int type = i8k_get_fan_type(data, channel); | 
 |  | 
 | 	if (type < 0) | 
 | 		return ERR_PTR(type); | 
 |  | 
 | 	if (type & 0x10) { | 
 | 		dock = true; | 
 | 		type &= 0x0F; | 
 | 	} | 
 |  | 
 | 	if (type >= ARRAY_SIZE(fan_labels)) | 
 | 		type = ARRAY_SIZE(fan_labels) - 1; | 
 |  | 
 | 	return dock ? docking_labels[type] : fan_labels[type]; | 
 | } | 
 |  | 
 | static int dell_smm_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, | 
 | 				int channel, const char **str) | 
 | { | 
 | 	struct dell_smm_data *data = dev_get_drvdata(dev); | 
 |  | 
 | 	switch (type) { | 
 | 	case hwmon_temp: | 
 | 		switch (attr) { | 
 | 		case hwmon_temp_label: | 
 | 			*str = temp_labels[data->temp_type[channel]]; | 
 | 			return 0; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case hwmon_fan: | 
 | 		switch (attr) { | 
 | 		case hwmon_fan_label: | 
 | 			*str = dell_smm_fan_label(data, channel); | 
 | 			return PTR_ERR_OR_ZERO(*str); | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | static int dell_smm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, | 
 | 			  long val) | 
 | { | 
 | 	struct dell_smm_data *data = dev_get_drvdata(dev); | 
 | 	unsigned long pwm; | 
 | 	bool enable; | 
 | 	int err; | 
 |  | 
 | 	switch (type) { | 
 | 	case hwmon_pwm: | 
 | 		switch (attr) { | 
 | 		case hwmon_pwm_input: | 
 | 			pwm = clamp_val(DIV_ROUND_CLOSEST(val, data->i8k_pwm_mult), 0, | 
 | 					data->i8k_fan_max); | 
 |  | 
 | 			mutex_lock(&data->i8k_mutex); | 
 | 			err = i8k_set_fan(data, channel, pwm); | 
 | 			mutex_unlock(&data->i8k_mutex); | 
 |  | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			return 0; | 
 | 		case hwmon_pwm_enable: | 
 | 			if (!val) | 
 | 				return -EINVAL; | 
 |  | 
 | 			if (val == 1) | 
 | 				enable = false; | 
 | 			else | 
 | 				enable = true; | 
 |  | 
 | 			mutex_lock(&data->i8k_mutex); | 
 | 			err = i8k_enable_fan_auto_mode(data, enable); | 
 | 			mutex_unlock(&data->i8k_mutex); | 
 |  | 
 | 			if (err < 0) | 
 | 				return err; | 
 |  | 
 | 			return 0; | 
 | 		default: | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | static const struct hwmon_ops dell_smm_ops = { | 
 | 	.is_visible = dell_smm_is_visible, | 
 | 	.read = dell_smm_read, | 
 | 	.read_string = dell_smm_read_string, | 
 | 	.write = dell_smm_write, | 
 | }; | 
 |  | 
 | static const struct hwmon_channel_info *dell_smm_info[] = { | 
 | 	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), | 
 | 	HWMON_CHANNEL_INFO(temp, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL, | 
 | 			   HWMON_T_INPUT | HWMON_T_LABEL | 
 | 			   ), | 
 | 	HWMON_CHANNEL_INFO(fan, | 
 | 			   HWMON_F_INPUT | HWMON_F_LABEL, | 
 | 			   HWMON_F_INPUT | HWMON_F_LABEL, | 
 | 			   HWMON_F_INPUT | HWMON_F_LABEL | 
 | 			   ), | 
 | 	HWMON_CHANNEL_INFO(pwm, | 
 | 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE, | 
 | 			   HWMON_PWM_INPUT, | 
 | 			   HWMON_PWM_INPUT | 
 | 			   ), | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct hwmon_chip_info dell_smm_chip_info = { | 
 | 	.ops = &dell_smm_ops, | 
 | 	.info = dell_smm_info, | 
 | }; | 
 |  | 
 | static int __init dell_smm_init_hwmon(struct device *dev) | 
 | { | 
 | 	struct dell_smm_data *data = dev_get_drvdata(dev); | 
 | 	struct device *dell_smm_hwmon_dev; | 
 | 	int i, err; | 
 |  | 
 | 	for (i = 0; i < DELL_SMM_NO_TEMP; i++) { | 
 | 		data->temp_type[i] = i8k_get_temp_type(i); | 
 | 		if (data->temp_type[i] < 0) | 
 | 			continue; | 
 |  | 
 | 		if (data->temp_type[i] >= ARRAY_SIZE(temp_labels)) | 
 | 			data->temp_type[i] = ARRAY_SIZE(temp_labels) - 1; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < DELL_SMM_NO_FANS; i++) { | 
 | 		data->fan_type[i] = INT_MIN; | 
 | 		err = i8k_get_fan_status(data, i); | 
 | 		if (err < 0) | 
 | 			err = i8k_get_fan_type(data, i); | 
 | 		if (err >= 0) | 
 | 			data->fan[i] = true; | 
 | 	} | 
 |  | 
 | 	dell_smm_hwmon_dev = devm_hwmon_device_register_with_info(dev, "dell_smm", data, | 
 | 								  &dell_smm_chip_info, NULL); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(dell_smm_hwmon_dev); | 
 | } | 
 |  | 
 | struct i8k_config_data { | 
 | 	uint fan_mult; | 
 | 	uint fan_max; | 
 | }; | 
 |  | 
 | enum i8k_configs { | 
 | 	DELL_LATITUDE_D520, | 
 | 	DELL_PRECISION_490, | 
 | 	DELL_STUDIO, | 
 | 	DELL_XPS, | 
 | }; | 
 |  | 
 | static const struct i8k_config_data i8k_config_data[] __initconst = { | 
 | 	[DELL_LATITUDE_D520] = { | 
 | 		.fan_mult = 1, | 
 | 		.fan_max = I8K_FAN_TURBO, | 
 | 	}, | 
 | 	[DELL_PRECISION_490] = { | 
 | 		.fan_mult = 1, | 
 | 		.fan_max = I8K_FAN_TURBO, | 
 | 	}, | 
 | 	[DELL_STUDIO] = { | 
 | 		.fan_mult = 1, | 
 | 		.fan_max = I8K_FAN_HIGH, | 
 | 	}, | 
 | 	[DELL_XPS] = { | 
 | 		.fan_mult = 1, | 
 | 		.fan_max = I8K_FAN_HIGH, | 
 | 	}, | 
 | }; | 
 |  | 
 | static const struct dmi_system_id i8k_dmi_table[] __initconst = { | 
 | 	{ | 
 | 		.ident = "Dell Inspiron", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Latitude", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Inspiron 2", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Latitude D520", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Latitude 2", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), | 
 | 		}, | 
 | 	}, | 
 | 	{	/* UK Inspiron 6400  */ | 
 | 		.ident = "Dell Inspiron 3", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "MM061"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Inspiron 3", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "MP061"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Precision 490", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, | 
 | 				  "Precision WorkStation 490"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_config_data[DELL_PRECISION_490], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Precision", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Precision"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Vostro", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Studio", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Studio"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_config_data[DELL_STUDIO], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell XPS M140", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_config_data[DELL_XPS], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell XPS", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "XPS"), | 
 | 		}, | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); | 
 |  | 
 | /* | 
 |  * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed | 
 |  * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist | 
 |  * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call. | 
 |  * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121 | 
 |  */ | 
 | static const struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initconst = { | 
 | 	{ | 
 | 		.ident = "Dell Studio XPS 8000", | 
 | 		.matches = { | 
 | 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8000"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Studio XPS 8100", | 
 | 		.matches = { | 
 | 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Inspiron 580", | 
 | 		.matches = { | 
 | 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "), | 
 | 		}, | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 |  | 
 | /* | 
 |  * On some machines all fan related SMM functions implemented by Dell BIOS | 
 |  * firmware freeze kernel for about 500ms. Until Dell fixes these problems fan | 
 |  * support for affected blacklisted Dell machines stay disabled. | 
 |  * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=195751 | 
 |  */ | 
 | static const struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initconst = { | 
 | 	{ | 
 | 		.ident = "Dell Inspiron 7720", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Vostro 3360", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell XPS13 9333", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell XPS 15 L502X", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L502X"), | 
 | 		}, | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 |  | 
 | struct i8k_fan_control_data { | 
 | 	unsigned int manual_fan; | 
 | 	unsigned int auto_fan; | 
 | }; | 
 |  | 
 | enum i8k_fan_controls { | 
 | 	I8K_FAN_34A3_35A3, | 
 | }; | 
 |  | 
 | static const struct i8k_fan_control_data i8k_fan_control_data[] __initconst = { | 
 | 	[I8K_FAN_34A3_35A3] = { | 
 | 		.manual_fan = 0x34a3, | 
 | 		.auto_fan = 0x35a3, | 
 | 	}, | 
 | }; | 
 |  | 
 | static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = { | 
 | 	{ | 
 | 		.ident = "Dell Latitude 5480", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5480"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Latitude E6440", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Latitude E7440", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E7440"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Precision 5530", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 5530"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], | 
 | 	}, | 
 | 	{ | 
 | 		.ident = "Dell Precision 7510", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), | 
 | 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 7510"), | 
 | 		}, | 
 | 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], | 
 | 	}, | 
 | 	{ } | 
 | }; | 
 |  | 
 | static int __init dell_smm_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct dell_smm_data *data; | 
 | 	const struct dmi_system_id *id, *fan_control; | 
 | 	int fan, ret; | 
 |  | 
 | 	data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	mutex_init(&data->i8k_mutex); | 
 | 	data->i8k_fan_mult = I8K_FAN_MULT; | 
 | 	data->i8k_fan_max = I8K_FAN_HIGH; | 
 | 	platform_set_drvdata(pdev, data); | 
 |  | 
 | 	if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) { | 
 | 		dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan support\n"); | 
 | 		if (!force) | 
 | 			data->disallow_fan_support = true; | 
 | 	} | 
 |  | 
 | 	if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) { | 
 | 		dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan type call\n"); | 
 | 		if (!force) | 
 | 			data->disallow_fan_type_call = true; | 
 | 	} | 
 |  | 
 | 	strscpy(data->bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), | 
 | 		sizeof(data->bios_version)); | 
 | 	strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), | 
 | 		sizeof(data->bios_machineid)); | 
 |  | 
 | 	/* | 
 | 	 * Set fan multiplier and maximal fan speed from dmi config | 
 | 	 * Values specified in module parameters override values from dmi | 
 | 	 */ | 
 | 	id = dmi_first_match(i8k_dmi_table); | 
 | 	if (id && id->driver_data) { | 
 | 		const struct i8k_config_data *conf = id->driver_data; | 
 |  | 
 | 		if (!fan_mult && conf->fan_mult) | 
 | 			fan_mult = conf->fan_mult; | 
 |  | 
 | 		if (!fan_max && conf->fan_max) | 
 | 			fan_max = conf->fan_max; | 
 | 	} | 
 |  | 
 | 	data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH;	/* Must not be 0 */ | 
 | 	data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max); | 
 |  | 
 | 	fan_control = dmi_first_match(i8k_whitelist_fan_control); | 
 | 	if (fan_control && fan_control->driver_data) { | 
 | 		const struct i8k_fan_control_data *control = fan_control->driver_data; | 
 |  | 
 | 		data->manual_fan = control->manual_fan; | 
 | 		data->auto_fan = control->auto_fan; | 
 | 		dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n"); | 
 | 	} | 
 |  | 
 | 	if (!fan_mult) { | 
 | 		/* | 
 | 		 * Autodetect fan multiplier based on nominal rpm | 
 | 		 * If fan reports rpm value too high then set multiplier to 1 | 
 | 		 */ | 
 | 		for (fan = 0; fan < DELL_SMM_NO_FANS; ++fan) { | 
 | 			ret = i8k_get_fan_nominal_speed(data, fan, data->i8k_fan_max); | 
 | 			if (ret < 0) | 
 | 				continue; | 
 |  | 
 | 			if (ret > I8K_FAN_MAX_RPM) | 
 | 				data->i8k_fan_mult = 1; | 
 | 			break; | 
 | 		} | 
 | 	} else { | 
 | 		/* Fan multiplier was specified in module param or in dmi */ | 
 | 		data->i8k_fan_mult = fan_mult; | 
 | 	} | 
 |  | 
 | 	ret = dell_smm_init_hwmon(&pdev->dev); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	i8k_init_procfs(&pdev->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver dell_smm_driver = { | 
 | 	.driver		= { | 
 | 		.name	= KBUILD_MODNAME, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct platform_device *dell_smm_device; | 
 |  | 
 | /* | 
 |  * Probe for the presence of a supported laptop. | 
 |  */ | 
 | static int __init i8k_init(void) | 
 | { | 
 | 	/* | 
 | 	 * Get DMI information | 
 | 	 */ | 
 | 	if (!dmi_check_system(i8k_dmi_table)) { | 
 | 		if (!ignore_dmi && !force) | 
 | 			return -ENODEV; | 
 |  | 
 | 		pr_info("not running on a supported Dell system.\n"); | 
 | 		pr_info("vendor=%s, model=%s, version=%s\n", | 
 | 			i8k_get_dmi_data(DMI_SYS_VENDOR), | 
 | 			i8k_get_dmi_data(DMI_PRODUCT_NAME), | 
 | 			i8k_get_dmi_data(DMI_BIOS_VERSION)); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Get SMM Dell signature | 
 | 	 */ | 
 | 	if (i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG1) && | 
 | 	    i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG2)) { | 
 | 		pr_err("unable to get SMM Dell signature\n"); | 
 | 		if (!force) | 
 | 			return -ENODEV; | 
 | 	} | 
 |  | 
 | 	dell_smm_device = platform_create_bundle(&dell_smm_driver, dell_smm_probe, NULL, 0, NULL, | 
 | 						 0); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(dell_smm_device); | 
 | } | 
 |  | 
 | static void __exit i8k_exit(void) | 
 | { | 
 | 	platform_device_unregister(dell_smm_device); | 
 | 	platform_driver_unregister(&dell_smm_driver); | 
 | } | 
 |  | 
 | module_init(i8k_init); | 
 | module_exit(i8k_exit); |