blob: bfb3703357c55aba72674827527e0fba68650b3e [file] [log] [blame]
/*
* arch/arm/mach-dove/irq.c
*
* Dove IRQ handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include "common.h"
static void pmu_irq_mask(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u &= ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_unmask(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u |= 1 << (pin & 31);
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_ack(struct irq_data *d)
{
int pin = irq_to_pmu(d->irq);
u32 u;
/*
* The PMU mask register is not RW0C: it is RW. This means that
* the bits take whatever value is written to them; if you write
* a '1', you will set the interrupt.
*
* Unfortunately this means there is NO race free way to clear
* these interrupts.
*
* So, let's structure the code so that the window is as small as
* possible.
*/
u = ~(1 << (pin & 31));
u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
writel_relaxed(u, PMU_INTERRUPT_CAUSE);
}
static struct irq_chip pmu_irq_chip = {
.name = "pmu_irq",
.irq_mask = pmu_irq_mask,
.irq_unmask = pmu_irq_unmask,
.irq_ack = pmu_irq_ack,
};
static void pmu_irq_handler(struct irq_desc *desc)
{
unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
unsigned int irq;
cause &= readl(PMU_INTERRUPT_MASK);
if (cause == 0) {
do_bad_IRQ(desc);
return;
}
for (irq = 0; irq < NR_PMU_IRQS; irq++) {
if (!(cause & (1 << irq)))
continue;
irq = pmu_to_irq(irq);
generic_handle_irq(irq);
}
}
static int __initdata gpio0_irqs[4] = {
IRQ_DOVE_GPIO_0_7,
IRQ_DOVE_GPIO_8_15,
IRQ_DOVE_GPIO_16_23,
IRQ_DOVE_GPIO_24_31,
};
static int __initdata gpio1_irqs[4] = {
IRQ_DOVE_HIGH_GPIO,
0,
0,
0,
};
static int __initdata gpio2_irqs[4] = {
0,
0,
0,
0,
};
#ifdef CONFIG_MULTI_IRQ_HANDLER
/*
* Compiling with both non-DT and DT support enabled, will
* break asm irq handler used by non-DT boards. Therefore,
* we provide a C-style irq handler even for non-DT boards,
* if MULTI_IRQ_HANDLER is set.
*/
static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
{
u32 stat;
stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
if (stat) {
unsigned int hwirq = 1 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
if (stat) {
unsigned int hwirq = 33 + __fls(stat);
handle_IRQ(hwirq, regs);
return;
}
}
#endif
void __init dove_init_irq(void)
{
int i;
orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(dove_legacy_handle_irq);
#endif
/*
* Initialize gpiolib for GPIOs 0-71.
*/
orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START, gpio0_irqs);
orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
/*
* Mask and clear PMU interrupts
*/
writel(0, PMU_INTERRUPT_MASK);
writel(0, PMU_INTERRUPT_CAUSE);
for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
irq_clear_status_flags(i, IRQ_NOREQUEST);
}
irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
}