|  | /* | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright 2007	Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2008-2011	Luis R. Rodriguez <mcgrof@qca.qualcomm.com> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright      2017  Intel Deutschland GmbH | 
|  | * Copyright (C) 2018 - 2025 Intel Corporation | 
|  | * | 
|  | * Permission to use, copy, modify, and/or distribute this software for any | 
|  | * purpose with or without fee is hereby granted, provided that the above | 
|  | * copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  |  | 
|  | /** | 
|  | * DOC: Wireless regulatory infrastructure | 
|  | * | 
|  | * The usual implementation is for a driver to read a device EEPROM to | 
|  | * determine which regulatory domain it should be operating under, then | 
|  | * looking up the allowable channels in a driver-local table and finally | 
|  | * registering those channels in the wiphy structure. | 
|  | * | 
|  | * Another set of compliance enforcement is for drivers to use their | 
|  | * own compliance limits which can be stored on the EEPROM. The host | 
|  | * driver or firmware may ensure these are used. | 
|  | * | 
|  | * In addition to all this we provide an extra layer of regulatory | 
|  | * conformance. For drivers which do not have any regulatory | 
|  | * information CRDA provides the complete regulatory solution. | 
|  | * For others it provides a community effort on further restrictions | 
|  | * to enhance compliance. | 
|  | * | 
|  | * Note: When number of rules --> infinity we will not be able to | 
|  | * index on alpha2 any more, instead we'll probably have to | 
|  | * rely on some SHA1 checksum of the regdomain for example. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/nl80211.h> | 
|  | #include <linux/device/faux.h> | 
|  | #include <linux/verification.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/units.h> | 
|  |  | 
|  | #include <net/cfg80211.h> | 
|  | #include "core.h" | 
|  | #include "reg.h" | 
|  | #include "rdev-ops.h" | 
|  | #include "nl80211.h" | 
|  |  | 
|  | /* | 
|  | * Grace period we give before making sure all current interfaces reside on | 
|  | * channels allowed by the current regulatory domain. | 
|  | */ | 
|  | #define REG_ENFORCE_GRACE_MS 60000 | 
|  |  | 
|  | /** | 
|  | * enum reg_request_treatment - regulatory request treatment | 
|  | * | 
|  | * @REG_REQ_OK: continue processing the regulatory request | 
|  | * @REG_REQ_IGNORE: ignore the regulatory request | 
|  | * @REG_REQ_INTERSECT: the regulatory domain resulting from this request should | 
|  | *	be intersected with the current one. | 
|  | * @REG_REQ_ALREADY_SET: the regulatory request will not change the current | 
|  | *	regulatory settings, and no further processing is required. | 
|  | */ | 
|  | enum reg_request_treatment { | 
|  | REG_REQ_OK, | 
|  | REG_REQ_IGNORE, | 
|  | REG_REQ_INTERSECT, | 
|  | REG_REQ_ALREADY_SET, | 
|  | }; | 
|  |  | 
|  | static struct regulatory_request core_request_world = { | 
|  | .initiator = NL80211_REGDOM_SET_BY_CORE, | 
|  | .alpha2[0] = '0', | 
|  | .alpha2[1] = '0', | 
|  | .intersect = false, | 
|  | .processed = true, | 
|  | .country_ie_env = ENVIRON_ANY, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Receipt of information from last regulatory request, | 
|  | * protected by RTNL (and can be accessed with RCU protection) | 
|  | */ | 
|  | static struct regulatory_request __rcu *last_request = | 
|  | (void __force __rcu *)&core_request_world; | 
|  |  | 
|  | /* To trigger userspace events and load firmware */ | 
|  | static struct faux_device *reg_fdev; | 
|  |  | 
|  | /* | 
|  | * Central wireless core regulatory domains, we only need two, | 
|  | * the current one and a world regulatory domain in case we have no | 
|  | * information to give us an alpha2. | 
|  | * (protected by RTNL, can be read under RCU) | 
|  | */ | 
|  | const struct ieee80211_regdomain __rcu *cfg80211_regdomain; | 
|  |  | 
|  | /* | 
|  | * Number of devices that registered to the core | 
|  | * that support cellular base station regulatory hints | 
|  | * (protected by RTNL) | 
|  | */ | 
|  | static int reg_num_devs_support_basehint; | 
|  |  | 
|  | /* | 
|  | * State variable indicating if the platform on which the devices | 
|  | * are attached is operating in an indoor environment. The state variable | 
|  | * is relevant for all registered devices. | 
|  | */ | 
|  | static bool reg_is_indoor; | 
|  | static DEFINE_SPINLOCK(reg_indoor_lock); | 
|  |  | 
|  | /* Used to track the userspace process controlling the indoor setting */ | 
|  | static u32 reg_is_indoor_portid; | 
|  |  | 
|  | static void restore_regulatory_settings(bool reset_user, bool cached); | 
|  | static void print_regdomain(const struct ieee80211_regdomain *rd); | 
|  | static void reg_process_hint(struct regulatory_request *reg_request); | 
|  |  | 
|  | static const struct ieee80211_regdomain *get_cfg80211_regdom(void) | 
|  | { | 
|  | return rcu_dereference_rtnl(cfg80211_regdomain); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns the regulatory domain associated with the wiphy. | 
|  | * | 
|  | * Requires any of RTNL, wiphy mutex or RCU protection. | 
|  | */ | 
|  | const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy) | 
|  | { | 
|  | return rcu_dereference_check(wiphy->regd, | 
|  | lockdep_is_held(&wiphy->mtx) || | 
|  | lockdep_rtnl_is_held()); | 
|  | } | 
|  | EXPORT_SYMBOL(get_wiphy_regdom); | 
|  |  | 
|  | static const char *reg_dfs_region_str(enum nl80211_dfs_regions dfs_region) | 
|  | { | 
|  | switch (dfs_region) { | 
|  | case NL80211_DFS_UNSET: | 
|  | return "unset"; | 
|  | case NL80211_DFS_FCC: | 
|  | return "FCC"; | 
|  | case NL80211_DFS_ETSI: | 
|  | return "ETSI"; | 
|  | case NL80211_DFS_JP: | 
|  | return "JP"; | 
|  | } | 
|  | return "Unknown"; | 
|  | } | 
|  |  | 
|  | enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd = NULL; | 
|  | const struct ieee80211_regdomain *wiphy_regd = NULL; | 
|  | enum nl80211_dfs_regions dfs_region; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | regd = get_cfg80211_regdom(); | 
|  | dfs_region = regd->dfs_region; | 
|  |  | 
|  | if (!wiphy) | 
|  | goto out; | 
|  |  | 
|  | wiphy_regd = get_wiphy_regdom(wiphy); | 
|  | if (!wiphy_regd) | 
|  | goto out; | 
|  |  | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) { | 
|  | dfs_region = wiphy_regd->dfs_region; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (wiphy_regd->dfs_region == regd->dfs_region) | 
|  | goto out; | 
|  |  | 
|  | pr_debug("%s: device specific dfs_region (%s) disagrees with cfg80211's central dfs_region (%s)\n", | 
|  | dev_name(&wiphy->dev), | 
|  | reg_dfs_region_str(wiphy_regd->dfs_region), | 
|  | reg_dfs_region_str(regd->dfs_region)); | 
|  |  | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return dfs_region; | 
|  | } | 
|  |  | 
|  | static void rcu_free_regdom(const struct ieee80211_regdomain *r) | 
|  | { | 
|  | if (!r) | 
|  | return; | 
|  | kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); | 
|  | } | 
|  |  | 
|  | static struct regulatory_request *get_last_request(void) | 
|  | { | 
|  | return rcu_dereference_rtnl(last_request); | 
|  | } | 
|  |  | 
|  | /* Used to queue up regulatory hints */ | 
|  | static LIST_HEAD(reg_requests_list); | 
|  | static DEFINE_SPINLOCK(reg_requests_lock); | 
|  |  | 
|  | /* Used to queue up beacon hints for review */ | 
|  | static LIST_HEAD(reg_pending_beacons); | 
|  | static DEFINE_SPINLOCK(reg_pending_beacons_lock); | 
|  |  | 
|  | /* Used to keep track of processed beacon hints */ | 
|  | static LIST_HEAD(reg_beacon_list); | 
|  |  | 
|  | struct reg_beacon { | 
|  | struct list_head list; | 
|  | struct ieee80211_channel chan; | 
|  | }; | 
|  |  | 
|  | static void reg_check_chans_work(struct work_struct *work); | 
|  | static DECLARE_DELAYED_WORK(reg_check_chans, reg_check_chans_work); | 
|  |  | 
|  | static void reg_todo(struct work_struct *work); | 
|  | static DECLARE_WORK(reg_work, reg_todo); | 
|  |  | 
|  | /* We keep a static world regulatory domain in case of the absence of CRDA */ | 
|  | static const struct ieee80211_regdomain world_regdom = { | 
|  | .n_reg_rules = 8, | 
|  | .alpha2 =  "00", | 
|  | .reg_rules = { | 
|  | /* IEEE 802.11b/g, channels 1..11 */ | 
|  | REG_RULE(2412-10, 2462+10, 40, 6, 20, 0), | 
|  | /* IEEE 802.11b/g, channels 12..13. */ | 
|  | REG_RULE(2467-10, 2472+10, 20, 6, 20, | 
|  | NL80211_RRF_NO_IR | NL80211_RRF_AUTO_BW), | 
|  | /* IEEE 802.11 channel 14 - Only JP enables | 
|  | * this and for 802.11b only */ | 
|  | REG_RULE(2484-10, 2484+10, 20, 6, 20, | 
|  | NL80211_RRF_NO_IR | | 
|  | NL80211_RRF_NO_OFDM), | 
|  | /* IEEE 802.11a, channel 36..48 */ | 
|  | REG_RULE(5180-10, 5240+10, 80, 6, 20, | 
|  | NL80211_RRF_NO_IR | | 
|  | NL80211_RRF_AUTO_BW), | 
|  |  | 
|  | /* IEEE 802.11a, channel 52..64 - DFS required */ | 
|  | REG_RULE(5260-10, 5320+10, 80, 6, 20, | 
|  | NL80211_RRF_NO_IR | | 
|  | NL80211_RRF_AUTO_BW | | 
|  | NL80211_RRF_DFS), | 
|  |  | 
|  | /* IEEE 802.11a, channel 100..144 - DFS required */ | 
|  | REG_RULE(5500-10, 5720+10, 160, 6, 20, | 
|  | NL80211_RRF_NO_IR | | 
|  | NL80211_RRF_DFS), | 
|  |  | 
|  | /* IEEE 802.11a, channel 149..165 */ | 
|  | REG_RULE(5745-10, 5825+10, 80, 6, 20, | 
|  | NL80211_RRF_NO_IR), | 
|  |  | 
|  | /* IEEE 802.11ad (60GHz), channels 1..3 */ | 
|  | REG_RULE(56160+2160*1-1080, 56160+2160*3+1080, 2160, 0, 0, 0), | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* protected by RTNL */ | 
|  | static const struct ieee80211_regdomain *cfg80211_world_regdom = | 
|  | &world_regdom; | 
|  |  | 
|  | static char *ieee80211_regdom = "00"; | 
|  | static char user_alpha2[2]; | 
|  | static const struct ieee80211_regdomain *cfg80211_user_regdom; | 
|  |  | 
|  | module_param(ieee80211_regdom, charp, 0444); | 
|  | MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); | 
|  |  | 
|  | static void reg_free_request(struct regulatory_request *request) | 
|  | { | 
|  | if (request == &core_request_world) | 
|  | return; | 
|  |  | 
|  | if (request != get_last_request()) | 
|  | kfree(request); | 
|  | } | 
|  |  | 
|  | static void reg_free_last_request(void) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (lr != &core_request_world && lr) | 
|  | kfree_rcu(lr, rcu_head); | 
|  | } | 
|  |  | 
|  | static void reg_update_last_request(struct regulatory_request *request) | 
|  | { | 
|  | struct regulatory_request *lr; | 
|  |  | 
|  | lr = get_last_request(); | 
|  | if (lr == request) | 
|  | return; | 
|  |  | 
|  | reg_free_last_request(); | 
|  | rcu_assign_pointer(last_request, request); | 
|  | } | 
|  |  | 
|  | static void reset_regdomains(bool full_reset, | 
|  | const struct ieee80211_regdomain *new_regdom) | 
|  | { | 
|  | const struct ieee80211_regdomain *r; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | r = get_cfg80211_regdom(); | 
|  |  | 
|  | /* avoid freeing static information or freeing something twice */ | 
|  | if (r == cfg80211_world_regdom) | 
|  | r = NULL; | 
|  | if (cfg80211_world_regdom == &world_regdom) | 
|  | cfg80211_world_regdom = NULL; | 
|  | if (r == &world_regdom) | 
|  | r = NULL; | 
|  |  | 
|  | rcu_free_regdom(r); | 
|  | rcu_free_regdom(cfg80211_world_regdom); | 
|  |  | 
|  | cfg80211_world_regdom = &world_regdom; | 
|  | rcu_assign_pointer(cfg80211_regdomain, new_regdom); | 
|  |  | 
|  | if (!full_reset) | 
|  | return; | 
|  |  | 
|  | reg_update_last_request(&core_request_world); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Dynamic world regulatory domain requested by the wireless | 
|  | * core upon initialization | 
|  | */ | 
|  | static void update_world_regdomain(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | struct regulatory_request *lr; | 
|  |  | 
|  | lr = get_last_request(); | 
|  |  | 
|  | WARN_ON(!lr); | 
|  |  | 
|  | reset_regdomains(false, rd); | 
|  |  | 
|  | cfg80211_world_regdom = rd; | 
|  | } | 
|  |  | 
|  | bool is_world_regdom(const char *alpha2) | 
|  | { | 
|  | if (!alpha2) | 
|  | return false; | 
|  | return alpha2[0] == '0' && alpha2[1] == '0'; | 
|  | } | 
|  |  | 
|  | static bool is_alpha2_set(const char *alpha2) | 
|  | { | 
|  | if (!alpha2) | 
|  | return false; | 
|  | return alpha2[0] && alpha2[1]; | 
|  | } | 
|  |  | 
|  | static bool is_unknown_alpha2(const char *alpha2) | 
|  | { | 
|  | if (!alpha2) | 
|  | return false; | 
|  | /* | 
|  | * Special case where regulatory domain was built by driver | 
|  | * but a specific alpha2 cannot be determined | 
|  | */ | 
|  | return alpha2[0] == '9' && alpha2[1] == '9'; | 
|  | } | 
|  |  | 
|  | static bool is_intersected_alpha2(const char *alpha2) | 
|  | { | 
|  | if (!alpha2) | 
|  | return false; | 
|  | /* | 
|  | * Special case where regulatory domain is the | 
|  | * result of an intersection between two regulatory domain | 
|  | * structures | 
|  | */ | 
|  | return alpha2[0] == '9' && alpha2[1] == '8'; | 
|  | } | 
|  |  | 
|  | static bool is_an_alpha2(const char *alpha2) | 
|  | { | 
|  | if (!alpha2) | 
|  | return false; | 
|  | return isascii(alpha2[0]) && isalpha(alpha2[0]) && | 
|  | isascii(alpha2[1]) && isalpha(alpha2[1]); | 
|  | } | 
|  |  | 
|  | static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) | 
|  | { | 
|  | if (!alpha2_x || !alpha2_y) | 
|  | return false; | 
|  | return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1]; | 
|  | } | 
|  |  | 
|  | static bool regdom_changes(const char *alpha2) | 
|  | { | 
|  | const struct ieee80211_regdomain *r = get_cfg80211_regdom(); | 
|  |  | 
|  | if (!r) | 
|  | return true; | 
|  | return !alpha2_equal(r->alpha2, alpha2); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets | 
|  | * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER | 
|  | * has ever been issued. | 
|  | */ | 
|  | static bool is_user_regdom_saved(void) | 
|  | { | 
|  | if (user_alpha2[0] == '9' && user_alpha2[1] == '7') | 
|  | return false; | 
|  |  | 
|  | /* This would indicate a mistake on the design */ | 
|  | if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2), | 
|  | "Unexpected user alpha2: %c%c\n", | 
|  | user_alpha2[0], user_alpha2[1])) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_regdomain * | 
|  | reg_copy_regd(const struct ieee80211_regdomain *src_regd) | 
|  | { | 
|  | struct ieee80211_regdomain *regd; | 
|  | unsigned int i; | 
|  |  | 
|  | regd = kzalloc(struct_size(regd, reg_rules, src_regd->n_reg_rules), | 
|  | GFP_KERNEL); | 
|  | if (!regd) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); | 
|  |  | 
|  | for (i = 0; i < src_regd->n_reg_rules; i++) | 
|  | memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], | 
|  | sizeof(struct ieee80211_reg_rule)); | 
|  |  | 
|  | return regd; | 
|  | } | 
|  |  | 
|  | static void cfg80211_save_user_regdom(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (!IS_ERR(cfg80211_user_regdom)) | 
|  | kfree(cfg80211_user_regdom); | 
|  | cfg80211_user_regdom = reg_copy_regd(rd); | 
|  | } | 
|  |  | 
|  | struct reg_regdb_apply_request { | 
|  | struct list_head list; | 
|  | const struct ieee80211_regdomain *regdom; | 
|  | }; | 
|  |  | 
|  | static LIST_HEAD(reg_regdb_apply_list); | 
|  | static DEFINE_MUTEX(reg_regdb_apply_mutex); | 
|  |  | 
|  | static void reg_regdb_apply(struct work_struct *work) | 
|  | { | 
|  | struct reg_regdb_apply_request *request; | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | mutex_lock(®_regdb_apply_mutex); | 
|  | while (!list_empty(®_regdb_apply_list)) { | 
|  | request = list_first_entry(®_regdb_apply_list, | 
|  | struct reg_regdb_apply_request, | 
|  | list); | 
|  | list_del(&request->list); | 
|  |  | 
|  | set_regdom(request->regdom, REGD_SOURCE_INTERNAL_DB); | 
|  | kfree(request); | 
|  | } | 
|  | mutex_unlock(®_regdb_apply_mutex); | 
|  |  | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static DECLARE_WORK(reg_regdb_work, reg_regdb_apply); | 
|  |  | 
|  | static int reg_schedule_apply(const struct ieee80211_regdomain *regdom) | 
|  | { | 
|  | struct reg_regdb_apply_request *request; | 
|  |  | 
|  | request = kzalloc(sizeof(struct reg_regdb_apply_request), GFP_KERNEL); | 
|  | if (!request) { | 
|  | kfree(regdom); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | request->regdom = regdom; | 
|  |  | 
|  | mutex_lock(®_regdb_apply_mutex); | 
|  | list_add_tail(&request->list, ®_regdb_apply_list); | 
|  | mutex_unlock(®_regdb_apply_mutex); | 
|  |  | 
|  | schedule_work(®_regdb_work); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_CRDA_SUPPORT | 
|  | /* Max number of consecutive attempts to communicate with CRDA  */ | 
|  | #define REG_MAX_CRDA_TIMEOUTS 10 | 
|  |  | 
|  | static u32 reg_crda_timeouts; | 
|  |  | 
|  | static void crda_timeout_work(struct work_struct *work); | 
|  | static DECLARE_DELAYED_WORK(crda_timeout, crda_timeout_work); | 
|  |  | 
|  | static void crda_timeout_work(struct work_struct *work) | 
|  | { | 
|  | pr_debug("Timeout while waiting for CRDA to reply, restoring regulatory settings\n"); | 
|  | rtnl_lock(); | 
|  | reg_crda_timeouts++; | 
|  | restore_regulatory_settings(true, false); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void cancel_crda_timeout(void) | 
|  | { | 
|  | cancel_delayed_work(&crda_timeout); | 
|  | } | 
|  |  | 
|  | static void cancel_crda_timeout_sync(void) | 
|  | { | 
|  | cancel_delayed_work_sync(&crda_timeout); | 
|  | } | 
|  |  | 
|  | static void reset_crda_timeouts(void) | 
|  | { | 
|  | reg_crda_timeouts = 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This lets us keep regulatory code which is updated on a regulatory | 
|  | * basis in userspace. | 
|  | */ | 
|  | static int call_crda(const char *alpha2) | 
|  | { | 
|  | char country[12]; | 
|  | char *env[] = { country, NULL }; | 
|  | int ret; | 
|  |  | 
|  | snprintf(country, sizeof(country), "COUNTRY=%c%c", | 
|  | alpha2[0], alpha2[1]); | 
|  |  | 
|  | if (reg_crda_timeouts > REG_MAX_CRDA_TIMEOUTS) { | 
|  | pr_debug("Exceeded CRDA call max attempts. Not calling CRDA\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!is_world_regdom((char *) alpha2)) | 
|  | pr_debug("Calling CRDA for country: %c%c\n", | 
|  | alpha2[0], alpha2[1]); | 
|  | else | 
|  | pr_debug("Calling CRDA to update world regulatory domain\n"); | 
|  |  | 
|  | ret = kobject_uevent_env(®_fdev->dev.kobj, KOBJ_CHANGE, env); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &crda_timeout, msecs_to_jiffies(3142)); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | static inline void cancel_crda_timeout(void) {} | 
|  | static inline void cancel_crda_timeout_sync(void) {} | 
|  | static inline void reset_crda_timeouts(void) {} | 
|  | static inline int call_crda(const char *alpha2) | 
|  | { | 
|  | return -ENODATA; | 
|  | } | 
|  | #endif /* CONFIG_CFG80211_CRDA_SUPPORT */ | 
|  |  | 
|  | /* code to directly load a firmware database through request_firmware */ | 
|  | static const struct fwdb_header *regdb; | 
|  |  | 
|  | struct fwdb_country { | 
|  | u8 alpha2[2]; | 
|  | __be16 coll_ptr; | 
|  | /* this struct cannot be extended */ | 
|  | } __packed __aligned(4); | 
|  |  | 
|  | struct fwdb_collection { | 
|  | u8 len; | 
|  | u8 n_rules; | 
|  | u8 dfs_region; | 
|  | /* no optional data yet */ | 
|  | /* aligned to 2, then followed by __be16 array of rule pointers */ | 
|  | } __packed __aligned(4); | 
|  |  | 
|  | enum fwdb_flags { | 
|  | FWDB_FLAG_NO_OFDM	= BIT(0), | 
|  | FWDB_FLAG_NO_OUTDOOR	= BIT(1), | 
|  | FWDB_FLAG_DFS		= BIT(2), | 
|  | FWDB_FLAG_NO_IR		= BIT(3), | 
|  | FWDB_FLAG_AUTO_BW	= BIT(4), | 
|  | }; | 
|  |  | 
|  | struct fwdb_wmm_ac { | 
|  | u8 ecw; | 
|  | u8 aifsn; | 
|  | __be16 cot; | 
|  | } __packed; | 
|  |  | 
|  | struct fwdb_wmm_rule { | 
|  | struct fwdb_wmm_ac client[IEEE80211_NUM_ACS]; | 
|  | struct fwdb_wmm_ac ap[IEEE80211_NUM_ACS]; | 
|  | } __packed; | 
|  |  | 
|  | struct fwdb_rule { | 
|  | u8 len; | 
|  | u8 flags; | 
|  | __be16 max_eirp; | 
|  | __be32 start, end, max_bw; | 
|  | /* start of optional data */ | 
|  | __be16 cac_timeout; | 
|  | __be16 wmm_ptr; | 
|  | } __packed __aligned(4); | 
|  |  | 
|  | #define FWDB_MAGIC 0x52474442 | 
|  | #define FWDB_VERSION 20 | 
|  |  | 
|  | struct fwdb_header { | 
|  | __be32 magic; | 
|  | __be32 version; | 
|  | struct fwdb_country country[]; | 
|  | } __packed __aligned(4); | 
|  |  | 
|  | static int ecw2cw(int ecw) | 
|  | { | 
|  | return (1 << ecw) - 1; | 
|  | } | 
|  |  | 
|  | static bool valid_wmm(struct fwdb_wmm_rule *rule) | 
|  | { | 
|  | struct fwdb_wmm_ac *ac = (struct fwdb_wmm_ac *)rule; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IEEE80211_NUM_ACS * 2; i++) { | 
|  | u16 cw_min = ecw2cw((ac[i].ecw & 0xf0) >> 4); | 
|  | u16 cw_max = ecw2cw(ac[i].ecw & 0x0f); | 
|  | u8 aifsn = ac[i].aifsn; | 
|  |  | 
|  | if (cw_min >= cw_max) | 
|  | return false; | 
|  |  | 
|  | if (aifsn < 1) | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool valid_rule(const u8 *data, unsigned int size, u16 rule_ptr) | 
|  | { | 
|  | struct fwdb_rule *rule = (void *)(data + (rule_ptr << 2)); | 
|  |  | 
|  | if ((u8 *)rule + sizeof(rule->len) > data + size) | 
|  | return false; | 
|  |  | 
|  | /* mandatory fields */ | 
|  | if (rule->len < offsetofend(struct fwdb_rule, max_bw)) | 
|  | return false; | 
|  | if (rule->len >= offsetofend(struct fwdb_rule, wmm_ptr)) { | 
|  | u32 wmm_ptr = be16_to_cpu(rule->wmm_ptr) << 2; | 
|  | struct fwdb_wmm_rule *wmm; | 
|  |  | 
|  | if (wmm_ptr + sizeof(struct fwdb_wmm_rule) > size) | 
|  | return false; | 
|  |  | 
|  | wmm = (void *)(data + wmm_ptr); | 
|  |  | 
|  | if (!valid_wmm(wmm)) | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool valid_country(const u8 *data, unsigned int size, | 
|  | const struct fwdb_country *country) | 
|  | { | 
|  | unsigned int ptr = be16_to_cpu(country->coll_ptr) << 2; | 
|  | struct fwdb_collection *coll = (void *)(data + ptr); | 
|  | __be16 *rules_ptr; | 
|  | unsigned int i; | 
|  |  | 
|  | /* make sure we can read len/n_rules */ | 
|  | if ((u8 *)coll + offsetofend(typeof(*coll), n_rules) > data + size) | 
|  | return false; | 
|  |  | 
|  | /* make sure base struct and all rules fit */ | 
|  | if ((u8 *)coll + ALIGN(coll->len, 2) + | 
|  | (coll->n_rules * 2) > data + size) | 
|  | return false; | 
|  |  | 
|  | /* mandatory fields must exist */ | 
|  | if (coll->len < offsetofend(struct fwdb_collection, dfs_region)) | 
|  | return false; | 
|  |  | 
|  | rules_ptr = (void *)((u8 *)coll + ALIGN(coll->len, 2)); | 
|  |  | 
|  | for (i = 0; i < coll->n_rules; i++) { | 
|  | u16 rule_ptr = be16_to_cpu(rules_ptr[i]); | 
|  |  | 
|  | if (!valid_rule(data, size, rule_ptr)) | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_REQUIRE_SIGNED_REGDB | 
|  | #include <keys/asymmetric-type.h> | 
|  |  | 
|  | static struct key *builtin_regdb_keys; | 
|  |  | 
|  | static int __init load_builtin_regdb_keys(void) | 
|  | { | 
|  | builtin_regdb_keys = | 
|  | keyring_alloc(".builtin_regdb_keys", | 
|  | KUIDT_INIT(0), KGIDT_INIT(0), current_cred(), | 
|  | ((KEY_POS_ALL & ~KEY_POS_SETATTR) | | 
|  | KEY_USR_VIEW | KEY_USR_READ | KEY_USR_SEARCH), | 
|  | KEY_ALLOC_NOT_IN_QUOTA, NULL, NULL); | 
|  | if (IS_ERR(builtin_regdb_keys)) | 
|  | return PTR_ERR(builtin_regdb_keys); | 
|  |  | 
|  | pr_notice("Loading compiled-in X.509 certificates for regulatory database\n"); | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS | 
|  | x509_load_certificate_list(shipped_regdb_certs, | 
|  | shipped_regdb_certs_len, | 
|  | builtin_regdb_keys); | 
|  | #endif | 
|  | #ifdef CONFIG_CFG80211_EXTRA_REGDB_KEYDIR | 
|  | if (CONFIG_CFG80211_EXTRA_REGDB_KEYDIR[0] != '\0') | 
|  | x509_load_certificate_list(extra_regdb_certs, | 
|  | extra_regdb_certs_len, | 
|  | builtin_regdb_keys); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | MODULE_FIRMWARE("regulatory.db.p7s"); | 
|  |  | 
|  | static bool regdb_has_valid_signature(const u8 *data, unsigned int size) | 
|  | { | 
|  | const struct firmware *sig; | 
|  | bool result; | 
|  |  | 
|  | if (request_firmware(&sig, "regulatory.db.p7s", ®_fdev->dev)) | 
|  | return false; | 
|  |  | 
|  | result = verify_pkcs7_signature(data, size, sig->data, sig->size, | 
|  | builtin_regdb_keys, | 
|  | VERIFYING_UNSPECIFIED_SIGNATURE, | 
|  | NULL, NULL) == 0; | 
|  |  | 
|  | release_firmware(sig); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static void free_regdb_keyring(void) | 
|  | { | 
|  | key_put(builtin_regdb_keys); | 
|  | } | 
|  | #else | 
|  | static int load_builtin_regdb_keys(void) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool regdb_has_valid_signature(const u8 *data, unsigned int size) | 
|  | { | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void free_regdb_keyring(void) | 
|  | { | 
|  | } | 
|  | #endif /* CONFIG_CFG80211_REQUIRE_SIGNED_REGDB */ | 
|  |  | 
|  | static bool valid_regdb(const u8 *data, unsigned int size) | 
|  | { | 
|  | const struct fwdb_header *hdr = (void *)data; | 
|  | const struct fwdb_country *country; | 
|  |  | 
|  | if (size < sizeof(*hdr)) | 
|  | return false; | 
|  |  | 
|  | if (hdr->magic != cpu_to_be32(FWDB_MAGIC)) | 
|  | return false; | 
|  |  | 
|  | if (hdr->version != cpu_to_be32(FWDB_VERSION)) | 
|  | return false; | 
|  |  | 
|  | if (!regdb_has_valid_signature(data, size)) | 
|  | return false; | 
|  |  | 
|  | country = &hdr->country[0]; | 
|  | while ((u8 *)(country + 1) <= data + size) { | 
|  | if (!country->coll_ptr) | 
|  | break; | 
|  | if (!valid_country(data, size, country)) | 
|  | return false; | 
|  | country++; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void set_wmm_rule(const struct fwdb_header *db, | 
|  | const struct fwdb_country *country, | 
|  | const struct fwdb_rule *rule, | 
|  | struct ieee80211_reg_rule *rrule) | 
|  | { | 
|  | struct ieee80211_wmm_rule *wmm_rule = &rrule->wmm_rule; | 
|  | struct fwdb_wmm_rule *wmm; | 
|  | unsigned int i, wmm_ptr; | 
|  |  | 
|  | wmm_ptr = be16_to_cpu(rule->wmm_ptr) << 2; | 
|  | wmm = (void *)((u8 *)db + wmm_ptr); | 
|  |  | 
|  | if (!valid_wmm(wmm)) { | 
|  | pr_err("Invalid regulatory WMM rule %u-%u in domain %c%c\n", | 
|  | be32_to_cpu(rule->start), be32_to_cpu(rule->end), | 
|  | country->alpha2[0], country->alpha2[1]); | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < IEEE80211_NUM_ACS; i++) { | 
|  | wmm_rule->client[i].cw_min = | 
|  | ecw2cw((wmm->client[i].ecw & 0xf0) >> 4); | 
|  | wmm_rule->client[i].cw_max = ecw2cw(wmm->client[i].ecw & 0x0f); | 
|  | wmm_rule->client[i].aifsn =  wmm->client[i].aifsn; | 
|  | wmm_rule->client[i].cot = | 
|  | 1000 * be16_to_cpu(wmm->client[i].cot); | 
|  | wmm_rule->ap[i].cw_min = ecw2cw((wmm->ap[i].ecw & 0xf0) >> 4); | 
|  | wmm_rule->ap[i].cw_max = ecw2cw(wmm->ap[i].ecw & 0x0f); | 
|  | wmm_rule->ap[i].aifsn = wmm->ap[i].aifsn; | 
|  | wmm_rule->ap[i].cot = 1000 * be16_to_cpu(wmm->ap[i].cot); | 
|  | } | 
|  |  | 
|  | rrule->has_wmm = true; | 
|  | } | 
|  |  | 
|  | static int __regdb_query_wmm(const struct fwdb_header *db, | 
|  | const struct fwdb_country *country, int freq, | 
|  | struct ieee80211_reg_rule *rrule) | 
|  | { | 
|  | unsigned int ptr = be16_to_cpu(country->coll_ptr) << 2; | 
|  | struct fwdb_collection *coll = (void *)((u8 *)db + ptr); | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < coll->n_rules; i++) { | 
|  | __be16 *rules_ptr = (void *)((u8 *)coll + ALIGN(coll->len, 2)); | 
|  | unsigned int rule_ptr = be16_to_cpu(rules_ptr[i]) << 2; | 
|  | struct fwdb_rule *rule = (void *)((u8 *)db + rule_ptr); | 
|  |  | 
|  | if (rule->len < offsetofend(struct fwdb_rule, wmm_ptr)) | 
|  | continue; | 
|  |  | 
|  | if (freq >= KHZ_TO_MHZ(be32_to_cpu(rule->start)) && | 
|  | freq <= KHZ_TO_MHZ(be32_to_cpu(rule->end))) { | 
|  | set_wmm_rule(db, country, rule, rrule); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | int reg_query_regdb_wmm(char *alpha2, int freq, struct ieee80211_reg_rule *rule) | 
|  | { | 
|  | const struct fwdb_header *hdr = regdb; | 
|  | const struct fwdb_country *country; | 
|  |  | 
|  | if (!regdb) | 
|  | return -ENODATA; | 
|  |  | 
|  | if (IS_ERR(regdb)) | 
|  | return PTR_ERR(regdb); | 
|  |  | 
|  | country = &hdr->country[0]; | 
|  | while (country->coll_ptr) { | 
|  | if (alpha2_equal(alpha2, country->alpha2)) | 
|  | return __regdb_query_wmm(regdb, country, freq, rule); | 
|  |  | 
|  | country++; | 
|  | } | 
|  |  | 
|  | return -ENODATA; | 
|  | } | 
|  | EXPORT_SYMBOL(reg_query_regdb_wmm); | 
|  |  | 
|  | static int regdb_query_country(const struct fwdb_header *db, | 
|  | const struct fwdb_country *country) | 
|  | { | 
|  | unsigned int ptr = be16_to_cpu(country->coll_ptr) << 2; | 
|  | struct fwdb_collection *coll = (void *)((u8 *)db + ptr); | 
|  | struct ieee80211_regdomain *regdom; | 
|  | unsigned int i; | 
|  |  | 
|  | regdom = kzalloc(struct_size(regdom, reg_rules, coll->n_rules), | 
|  | GFP_KERNEL); | 
|  | if (!regdom) | 
|  | return -ENOMEM; | 
|  |  | 
|  | regdom->n_reg_rules = coll->n_rules; | 
|  | regdom->alpha2[0] = country->alpha2[0]; | 
|  | regdom->alpha2[1] = country->alpha2[1]; | 
|  | regdom->dfs_region = coll->dfs_region; | 
|  |  | 
|  | for (i = 0; i < regdom->n_reg_rules; i++) { | 
|  | __be16 *rules_ptr = (void *)((u8 *)coll + ALIGN(coll->len, 2)); | 
|  | unsigned int rule_ptr = be16_to_cpu(rules_ptr[i]) << 2; | 
|  | struct fwdb_rule *rule = (void *)((u8 *)db + rule_ptr); | 
|  | struct ieee80211_reg_rule *rrule = ®dom->reg_rules[i]; | 
|  |  | 
|  | rrule->freq_range.start_freq_khz = be32_to_cpu(rule->start); | 
|  | rrule->freq_range.end_freq_khz = be32_to_cpu(rule->end); | 
|  | rrule->freq_range.max_bandwidth_khz = be32_to_cpu(rule->max_bw); | 
|  |  | 
|  | rrule->power_rule.max_antenna_gain = 0; | 
|  | rrule->power_rule.max_eirp = be16_to_cpu(rule->max_eirp); | 
|  |  | 
|  | rrule->flags = 0; | 
|  | if (rule->flags & FWDB_FLAG_NO_OFDM) | 
|  | rrule->flags |= NL80211_RRF_NO_OFDM; | 
|  | if (rule->flags & FWDB_FLAG_NO_OUTDOOR) | 
|  | rrule->flags |= NL80211_RRF_NO_OUTDOOR; | 
|  | if (rule->flags & FWDB_FLAG_DFS) | 
|  | rrule->flags |= NL80211_RRF_DFS; | 
|  | if (rule->flags & FWDB_FLAG_NO_IR) | 
|  | rrule->flags |= NL80211_RRF_NO_IR; | 
|  | if (rule->flags & FWDB_FLAG_AUTO_BW) | 
|  | rrule->flags |= NL80211_RRF_AUTO_BW; | 
|  |  | 
|  | rrule->dfs_cac_ms = 0; | 
|  |  | 
|  | /* handle optional data */ | 
|  | if (rule->len >= offsetofend(struct fwdb_rule, cac_timeout)) | 
|  | rrule->dfs_cac_ms = | 
|  | 1000 * be16_to_cpu(rule->cac_timeout); | 
|  | if (rule->len >= offsetofend(struct fwdb_rule, wmm_ptr)) | 
|  | set_wmm_rule(db, country, rule, rrule); | 
|  | } | 
|  |  | 
|  | return reg_schedule_apply(regdom); | 
|  | } | 
|  |  | 
|  | static int query_regdb(const char *alpha2) | 
|  | { | 
|  | const struct fwdb_header *hdr = regdb; | 
|  | const struct fwdb_country *country; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (IS_ERR(regdb)) | 
|  | return PTR_ERR(regdb); | 
|  |  | 
|  | country = &hdr->country[0]; | 
|  | while (country->coll_ptr) { | 
|  | if (alpha2_equal(alpha2, country->alpha2)) | 
|  | return regdb_query_country(regdb, country); | 
|  | country++; | 
|  | } | 
|  |  | 
|  | return -ENODATA; | 
|  | } | 
|  |  | 
|  | static void regdb_fw_cb(const struct firmware *fw, void *context) | 
|  | { | 
|  | int set_error = 0; | 
|  | bool restore = true; | 
|  | void *db; | 
|  |  | 
|  | if (!fw) { | 
|  | pr_info("failed to load regulatory.db\n"); | 
|  | set_error = -ENODATA; | 
|  | } else if (!valid_regdb(fw->data, fw->size)) { | 
|  | pr_info("loaded regulatory.db is malformed or signature is missing/invalid\n"); | 
|  | set_error = -EINVAL; | 
|  | } | 
|  |  | 
|  | rtnl_lock(); | 
|  | if (regdb && !IS_ERR(regdb)) { | 
|  | /* negative case - a bug | 
|  | * positive case - can happen due to race in case of multiple cb's in | 
|  | * queue, due to usage of asynchronous callback | 
|  | * | 
|  | * Either case, just restore and free new db. | 
|  | */ | 
|  | } else if (set_error) { | 
|  | regdb = ERR_PTR(set_error); | 
|  | } else if (fw) { | 
|  | db = kmemdup(fw->data, fw->size, GFP_KERNEL); | 
|  | if (db) { | 
|  | regdb = db; | 
|  | restore = context && query_regdb(context); | 
|  | } else { | 
|  | restore = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (restore) | 
|  | restore_regulatory_settings(true, false); | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  | kfree(context); | 
|  |  | 
|  | release_firmware(fw); | 
|  | } | 
|  |  | 
|  | MODULE_FIRMWARE("regulatory.db"); | 
|  |  | 
|  | static int query_regdb_file(const char *alpha2) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (regdb) | 
|  | return query_regdb(alpha2); | 
|  |  | 
|  | alpha2 = kmemdup(alpha2, 2, GFP_KERNEL); | 
|  | if (!alpha2) | 
|  | return -ENOMEM; | 
|  |  | 
|  | err = request_firmware_nowait(THIS_MODULE, true, "regulatory.db", | 
|  | ®_fdev->dev, GFP_KERNEL, | 
|  | (void *)alpha2, regdb_fw_cb); | 
|  | if (err) | 
|  | kfree(alpha2); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int reg_reload_regdb(void) | 
|  | { | 
|  | const struct firmware *fw; | 
|  | void *db; | 
|  | int err; | 
|  | const struct ieee80211_regdomain *current_regdomain; | 
|  | struct regulatory_request *request; | 
|  |  | 
|  | err = request_firmware(&fw, "regulatory.db", ®_fdev->dev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (!valid_regdb(fw->data, fw->size)) { | 
|  | err = -ENODATA; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | db = kmemdup(fw->data, fw->size, GFP_KERNEL); | 
|  | if (!db) { | 
|  | err = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | rtnl_lock(); | 
|  | if (!IS_ERR_OR_NULL(regdb)) | 
|  | kfree(regdb); | 
|  | regdb = db; | 
|  |  | 
|  | /* reset regulatory domain */ | 
|  | current_regdomain = get_cfg80211_regdom(); | 
|  |  | 
|  | request = kzalloc(sizeof(*request), GFP_KERNEL); | 
|  | if (!request) { | 
|  | err = -ENOMEM; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | request->wiphy_idx = WIPHY_IDX_INVALID; | 
|  | request->alpha2[0] = current_regdomain->alpha2[0]; | 
|  | request->alpha2[1] = current_regdomain->alpha2[1]; | 
|  | request->initiator = NL80211_REGDOM_SET_BY_CORE; | 
|  | request->user_reg_hint_type = NL80211_USER_REG_HINT_USER; | 
|  |  | 
|  | reg_process_hint(request); | 
|  |  | 
|  | out_unlock: | 
|  | rtnl_unlock(); | 
|  | out: | 
|  | release_firmware(fw); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static bool reg_query_database(struct regulatory_request *request) | 
|  | { | 
|  | if (query_regdb_file(request->alpha2) == 0) | 
|  | return true; | 
|  |  | 
|  | if (call_crda(request->alpha2) == 0) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | bool reg_is_valid_request(const char *alpha2) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (!lr || lr->processed) | 
|  | return false; | 
|  |  | 
|  | return alpha2_equal(lr->alpha2, alpha2); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | /* | 
|  | * Follow the driver's regulatory domain, if present, unless a country | 
|  | * IE has been processed or a user wants to help compliance further | 
|  | */ | 
|  | if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | lr->initiator != NL80211_REGDOM_SET_BY_USER && | 
|  | wiphy->regd) | 
|  | return get_wiphy_regdom(wiphy); | 
|  |  | 
|  | return get_cfg80211_regdom(); | 
|  | } | 
|  |  | 
|  | static unsigned int | 
|  | reg_get_max_bandwidth_from_range(const struct ieee80211_regdomain *rd, | 
|  | const struct ieee80211_reg_rule *rule) | 
|  | { | 
|  | const struct ieee80211_freq_range *freq_range = &rule->freq_range; | 
|  | const struct ieee80211_freq_range *freq_range_tmp; | 
|  | const struct ieee80211_reg_rule *tmp; | 
|  | u32 start_freq, end_freq, idx, no; | 
|  |  | 
|  | for (idx = 0; idx < rd->n_reg_rules; idx++) | 
|  | if (rule == &rd->reg_rules[idx]) | 
|  | break; | 
|  |  | 
|  | if (idx == rd->n_reg_rules) | 
|  | return 0; | 
|  |  | 
|  | /* get start_freq */ | 
|  | no = idx; | 
|  |  | 
|  | while (no) { | 
|  | tmp = &rd->reg_rules[--no]; | 
|  | freq_range_tmp = &tmp->freq_range; | 
|  |  | 
|  | if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz) | 
|  | break; | 
|  |  | 
|  | freq_range = freq_range_tmp; | 
|  | } | 
|  |  | 
|  | start_freq = freq_range->start_freq_khz; | 
|  |  | 
|  | /* get end_freq */ | 
|  | freq_range = &rule->freq_range; | 
|  | no = idx; | 
|  |  | 
|  | while (no < rd->n_reg_rules - 1) { | 
|  | tmp = &rd->reg_rules[++no]; | 
|  | freq_range_tmp = &tmp->freq_range; | 
|  |  | 
|  | if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz) | 
|  | break; | 
|  |  | 
|  | freq_range = freq_range_tmp; | 
|  | } | 
|  |  | 
|  | end_freq = freq_range->end_freq_khz; | 
|  |  | 
|  | return end_freq - start_freq; | 
|  | } | 
|  |  | 
|  | unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, | 
|  | const struct ieee80211_reg_rule *rule) | 
|  | { | 
|  | unsigned int bw = reg_get_max_bandwidth_from_range(rd, rule); | 
|  |  | 
|  | if (rule->flags & NL80211_RRF_NO_320MHZ) | 
|  | bw = min_t(unsigned int, bw, MHZ_TO_KHZ(160)); | 
|  | if (rule->flags & NL80211_RRF_NO_160MHZ) | 
|  | bw = min_t(unsigned int, bw, MHZ_TO_KHZ(80)); | 
|  | if (rule->flags & NL80211_RRF_NO_80MHZ) | 
|  | bw = min_t(unsigned int, bw, MHZ_TO_KHZ(40)); | 
|  |  | 
|  | /* | 
|  | * HT40+/HT40- limits are handled per-channel. Only limit BW if both | 
|  | * are not allowed. | 
|  | */ | 
|  | if (rule->flags & NL80211_RRF_NO_HT40MINUS && | 
|  | rule->flags & NL80211_RRF_NO_HT40PLUS) | 
|  | bw = min_t(unsigned int, bw, MHZ_TO_KHZ(20)); | 
|  |  | 
|  | return bw; | 
|  | } | 
|  |  | 
|  | /* Sanity check on a regulatory rule */ | 
|  | static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) | 
|  | { | 
|  | const struct ieee80211_freq_range *freq_range = &rule->freq_range; | 
|  | u32 freq_diff; | 
|  |  | 
|  | if (freq_range->start_freq_khz <= 0 || freq_range->end_freq_khz <= 0) | 
|  | return false; | 
|  |  | 
|  | if (freq_range->start_freq_khz > freq_range->end_freq_khz) | 
|  | return false; | 
|  |  | 
|  | freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | 
|  |  | 
|  | if (freq_range->end_freq_khz <= freq_range->start_freq_khz || | 
|  | freq_range->max_bandwidth_khz > freq_diff) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool is_valid_rd(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | const struct ieee80211_reg_rule *reg_rule = NULL; | 
|  | unsigned int i; | 
|  |  | 
|  | if (!rd->n_reg_rules) | 
|  | return false; | 
|  |  | 
|  | if (WARN_ON(rd->n_reg_rules > NL80211_MAX_SUPP_REG_RULES)) | 
|  | return false; | 
|  |  | 
|  | for (i = 0; i < rd->n_reg_rules; i++) { | 
|  | reg_rule = &rd->reg_rules[i]; | 
|  | if (!is_valid_reg_rule(reg_rule)) | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * freq_in_rule_band - tells us if a frequency is in a frequency band | 
|  | * @freq_range: frequency rule we want to query | 
|  | * @freq_khz: frequency we are inquiring about | 
|  | * | 
|  | * This lets us know if a specific frequency rule is or is not relevant to | 
|  | * a specific frequency's band. Bands are device specific and artificial | 
|  | * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"), | 
|  | * however it is safe for now to assume that a frequency rule should not be | 
|  | * part of a frequency's band if the start freq or end freq are off by more | 
|  | * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the | 
|  | * 60 GHz band. | 
|  | * This resolution can be lowered and should be considered as we add | 
|  | * regulatory rule support for other "bands". | 
|  | * | 
|  | * Returns: whether or not the frequency is in the range | 
|  | */ | 
|  | static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, | 
|  | u32 freq_khz) | 
|  | { | 
|  | /* | 
|  | * From 802.11ad: directional multi-gigabit (DMG): | 
|  | * Pertaining to operation in a frequency band containing a channel | 
|  | * with the Channel starting frequency above 45 GHz. | 
|  | */ | 
|  | u32 limit = freq_khz > 45 * KHZ_PER_GHZ ? 20 * KHZ_PER_GHZ : 2 * KHZ_PER_GHZ; | 
|  | if (abs(freq_khz - freq_range->start_freq_khz) <= limit) | 
|  | return true; | 
|  | if (abs(freq_khz - freq_range->end_freq_khz) <= limit) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Later on we can perhaps use the more restrictive DFS | 
|  | * region but we don't have information for that yet so | 
|  | * for now simply disallow conflicts. | 
|  | */ | 
|  | static enum nl80211_dfs_regions | 
|  | reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1, | 
|  | const enum nl80211_dfs_regions dfs_region2) | 
|  | { | 
|  | if (dfs_region1 != dfs_region2) | 
|  | return NL80211_DFS_UNSET; | 
|  | return dfs_region1; | 
|  | } | 
|  |  | 
|  | static void reg_wmm_rules_intersect(const struct ieee80211_wmm_ac *wmm_ac1, | 
|  | const struct ieee80211_wmm_ac *wmm_ac2, | 
|  | struct ieee80211_wmm_ac *intersect) | 
|  | { | 
|  | intersect->cw_min = max_t(u16, wmm_ac1->cw_min, wmm_ac2->cw_min); | 
|  | intersect->cw_max = max_t(u16, wmm_ac1->cw_max, wmm_ac2->cw_max); | 
|  | intersect->cot = min_t(u16, wmm_ac1->cot, wmm_ac2->cot); | 
|  | intersect->aifsn = max_t(u8, wmm_ac1->aifsn, wmm_ac2->aifsn); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Helper for regdom_intersect(), this does the real | 
|  | * mathematical intersection fun | 
|  | */ | 
|  | static int reg_rules_intersect(const struct ieee80211_regdomain *rd1, | 
|  | const struct ieee80211_regdomain *rd2, | 
|  | const struct ieee80211_reg_rule *rule1, | 
|  | const struct ieee80211_reg_rule *rule2, | 
|  | struct ieee80211_reg_rule *intersected_rule) | 
|  | { | 
|  | const struct ieee80211_freq_range *freq_range1, *freq_range2; | 
|  | struct ieee80211_freq_range *freq_range; | 
|  | const struct ieee80211_power_rule *power_rule1, *power_rule2; | 
|  | struct ieee80211_power_rule *power_rule; | 
|  | const struct ieee80211_wmm_rule *wmm_rule1, *wmm_rule2; | 
|  | struct ieee80211_wmm_rule *wmm_rule; | 
|  | u32 freq_diff, max_bandwidth1, max_bandwidth2; | 
|  |  | 
|  | freq_range1 = &rule1->freq_range; | 
|  | freq_range2 = &rule2->freq_range; | 
|  | freq_range = &intersected_rule->freq_range; | 
|  |  | 
|  | power_rule1 = &rule1->power_rule; | 
|  | power_rule2 = &rule2->power_rule; | 
|  | power_rule = &intersected_rule->power_rule; | 
|  |  | 
|  | wmm_rule1 = &rule1->wmm_rule; | 
|  | wmm_rule2 = &rule2->wmm_rule; | 
|  | wmm_rule = &intersected_rule->wmm_rule; | 
|  |  | 
|  | freq_range->start_freq_khz = max(freq_range1->start_freq_khz, | 
|  | freq_range2->start_freq_khz); | 
|  | freq_range->end_freq_khz = min(freq_range1->end_freq_khz, | 
|  | freq_range2->end_freq_khz); | 
|  |  | 
|  | max_bandwidth1 = freq_range1->max_bandwidth_khz; | 
|  | max_bandwidth2 = freq_range2->max_bandwidth_khz; | 
|  |  | 
|  | if (rule1->flags & NL80211_RRF_AUTO_BW) | 
|  | max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1); | 
|  | if (rule2->flags & NL80211_RRF_AUTO_BW) | 
|  | max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2); | 
|  |  | 
|  | freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2); | 
|  |  | 
|  | intersected_rule->flags = rule1->flags | rule2->flags; | 
|  |  | 
|  | /* | 
|  | * In case NL80211_RRF_AUTO_BW requested for both rules | 
|  | * set AUTO_BW in intersected rule also. Next we will | 
|  | * calculate BW correctly in handle_channel function. | 
|  | * In other case remove AUTO_BW flag while we calculate | 
|  | * maximum bandwidth correctly and auto calculation is | 
|  | * not required. | 
|  | */ | 
|  | if ((rule1->flags & NL80211_RRF_AUTO_BW) && | 
|  | (rule2->flags & NL80211_RRF_AUTO_BW)) | 
|  | intersected_rule->flags |= NL80211_RRF_AUTO_BW; | 
|  | else | 
|  | intersected_rule->flags &= ~NL80211_RRF_AUTO_BW; | 
|  |  | 
|  | freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; | 
|  | if (freq_range->max_bandwidth_khz > freq_diff) | 
|  | freq_range->max_bandwidth_khz = freq_diff; | 
|  |  | 
|  | power_rule->max_eirp = min(power_rule1->max_eirp, | 
|  | power_rule2->max_eirp); | 
|  | power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, | 
|  | power_rule2->max_antenna_gain); | 
|  |  | 
|  | intersected_rule->dfs_cac_ms = max(rule1->dfs_cac_ms, | 
|  | rule2->dfs_cac_ms); | 
|  |  | 
|  | if (rule1->has_wmm && rule2->has_wmm) { | 
|  | u8 ac; | 
|  |  | 
|  | for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
|  | reg_wmm_rules_intersect(&wmm_rule1->client[ac], | 
|  | &wmm_rule2->client[ac], | 
|  | &wmm_rule->client[ac]); | 
|  | reg_wmm_rules_intersect(&wmm_rule1->ap[ac], | 
|  | &wmm_rule2->ap[ac], | 
|  | &wmm_rule->ap[ac]); | 
|  | } | 
|  |  | 
|  | intersected_rule->has_wmm = true; | 
|  | } else if (rule1->has_wmm) { | 
|  | *wmm_rule = *wmm_rule1; | 
|  | intersected_rule->has_wmm = true; | 
|  | } else if (rule2->has_wmm) { | 
|  | *wmm_rule = *wmm_rule2; | 
|  | intersected_rule->has_wmm = true; | 
|  | } else { | 
|  | intersected_rule->has_wmm = false; | 
|  | } | 
|  |  | 
|  | if (!is_valid_reg_rule(intersected_rule)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* check whether old rule contains new rule */ | 
|  | static bool rule_contains(struct ieee80211_reg_rule *r1, | 
|  | struct ieee80211_reg_rule *r2) | 
|  | { | 
|  | /* for simplicity, currently consider only same flags */ | 
|  | if (r1->flags != r2->flags) | 
|  | return false; | 
|  |  | 
|  | /* verify r1 is more restrictive */ | 
|  | if ((r1->power_rule.max_antenna_gain > | 
|  | r2->power_rule.max_antenna_gain) || | 
|  | r1->power_rule.max_eirp > r2->power_rule.max_eirp) | 
|  | return false; | 
|  |  | 
|  | /* make sure r2's range is contained within r1 */ | 
|  | if (r1->freq_range.start_freq_khz > r2->freq_range.start_freq_khz || | 
|  | r1->freq_range.end_freq_khz < r2->freq_range.end_freq_khz) | 
|  | return false; | 
|  |  | 
|  | /* and finally verify that r1.max_bw >= r2.max_bw */ | 
|  | if (r1->freq_range.max_bandwidth_khz < | 
|  | r2->freq_range.max_bandwidth_khz) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* add or extend current rules. do nothing if rule is already contained */ | 
|  | static void add_rule(struct ieee80211_reg_rule *rule, | 
|  | struct ieee80211_reg_rule *reg_rules, u32 *n_rules) | 
|  | { | 
|  | struct ieee80211_reg_rule *tmp_rule; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < *n_rules; i++) { | 
|  | tmp_rule = ®_rules[i]; | 
|  | /* rule is already contained - do nothing */ | 
|  | if (rule_contains(tmp_rule, rule)) | 
|  | return; | 
|  |  | 
|  | /* extend rule if possible */ | 
|  | if (rule_contains(rule, tmp_rule)) { | 
|  | memcpy(tmp_rule, rule, sizeof(*rule)); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | memcpy(®_rules[*n_rules], rule, sizeof(*rule)); | 
|  | (*n_rules)++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * regdom_intersect - do the intersection between two regulatory domains | 
|  | * @rd1: first regulatory domain | 
|  | * @rd2: second regulatory domain | 
|  | * | 
|  | * Use this function to get the intersection between two regulatory domains. | 
|  | * Once completed we will mark the alpha2 for the rd as intersected, "98", | 
|  | * as no one single alpha2 can represent this regulatory domain. | 
|  | * | 
|  | * Returns a pointer to the regulatory domain structure which will hold the | 
|  | * resulting intersection of rules between rd1 and rd2. We will | 
|  | * kzalloc() this structure for you. | 
|  | * | 
|  | * Returns: the intersected regdomain | 
|  | */ | 
|  | static struct ieee80211_regdomain * | 
|  | regdom_intersect(const struct ieee80211_regdomain *rd1, | 
|  | const struct ieee80211_regdomain *rd2) | 
|  | { | 
|  | int r; | 
|  | unsigned int x, y; | 
|  | unsigned int num_rules = 0; | 
|  | const struct ieee80211_reg_rule *rule1, *rule2; | 
|  | struct ieee80211_reg_rule intersected_rule; | 
|  | struct ieee80211_regdomain *rd; | 
|  |  | 
|  | if (!rd1 || !rd2) | 
|  | return NULL; | 
|  |  | 
|  | /* | 
|  | * First we get a count of the rules we'll need, then we actually | 
|  | * build them. This is to so we can malloc() and free() a | 
|  | * regdomain once. The reason we use reg_rules_intersect() here | 
|  | * is it will return -EINVAL if the rule computed makes no sense. | 
|  | * All rules that do check out OK are valid. | 
|  | */ | 
|  |  | 
|  | for (x = 0; x < rd1->n_reg_rules; x++) { | 
|  | rule1 = &rd1->reg_rules[x]; | 
|  | for (y = 0; y < rd2->n_reg_rules; y++) { | 
|  | rule2 = &rd2->reg_rules[y]; | 
|  | if (!reg_rules_intersect(rd1, rd2, rule1, rule2, | 
|  | &intersected_rule)) | 
|  | num_rules++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!num_rules) | 
|  | return NULL; | 
|  |  | 
|  | rd = kzalloc(struct_size(rd, reg_rules, num_rules), GFP_KERNEL); | 
|  | if (!rd) | 
|  | return NULL; | 
|  |  | 
|  | for (x = 0; x < rd1->n_reg_rules; x++) { | 
|  | rule1 = &rd1->reg_rules[x]; | 
|  | for (y = 0; y < rd2->n_reg_rules; y++) { | 
|  | rule2 = &rd2->reg_rules[y]; | 
|  | r = reg_rules_intersect(rd1, rd2, rule1, rule2, | 
|  | &intersected_rule); | 
|  | /* | 
|  | * No need to memset here the intersected rule here as | 
|  | * we're not using the stack anymore | 
|  | */ | 
|  | if (r) | 
|  | continue; | 
|  |  | 
|  | add_rule(&intersected_rule, rd->reg_rules, | 
|  | &rd->n_reg_rules); | 
|  | } | 
|  | } | 
|  |  | 
|  | rd->alpha2[0] = '9'; | 
|  | rd->alpha2[1] = '8'; | 
|  | rd->dfs_region = reg_intersect_dfs_region(rd1->dfs_region, | 
|  | rd2->dfs_region); | 
|  |  | 
|  | return rd; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * XXX: add support for the rest of enum nl80211_reg_rule_flags, we may | 
|  | * want to just have the channel structure use these | 
|  | */ | 
|  | static u32 map_regdom_flags(u32 rd_flags) | 
|  | { | 
|  | u32 channel_flags = 0; | 
|  | if (rd_flags & NL80211_RRF_NO_IR_ALL) | 
|  | channel_flags |= IEEE80211_CHAN_NO_IR; | 
|  | if (rd_flags & NL80211_RRF_DFS) | 
|  | channel_flags |= IEEE80211_CHAN_RADAR; | 
|  | if (rd_flags & NL80211_RRF_NO_OFDM) | 
|  | channel_flags |= IEEE80211_CHAN_NO_OFDM; | 
|  | if (rd_flags & NL80211_RRF_NO_OUTDOOR) | 
|  | channel_flags |= IEEE80211_CHAN_INDOOR_ONLY; | 
|  | if (rd_flags & NL80211_RRF_IR_CONCURRENT) | 
|  | channel_flags |= IEEE80211_CHAN_IR_CONCURRENT; | 
|  | if (rd_flags & NL80211_RRF_NO_HT40MINUS) | 
|  | channel_flags |= IEEE80211_CHAN_NO_HT40MINUS; | 
|  | if (rd_flags & NL80211_RRF_NO_HT40PLUS) | 
|  | channel_flags |= IEEE80211_CHAN_NO_HT40PLUS; | 
|  | if (rd_flags & NL80211_RRF_NO_80MHZ) | 
|  | channel_flags |= IEEE80211_CHAN_NO_80MHZ; | 
|  | if (rd_flags & NL80211_RRF_NO_160MHZ) | 
|  | channel_flags |= IEEE80211_CHAN_NO_160MHZ; | 
|  | if (rd_flags & NL80211_RRF_NO_HE) | 
|  | channel_flags |= IEEE80211_CHAN_NO_HE; | 
|  | if (rd_flags & NL80211_RRF_NO_320MHZ) | 
|  | channel_flags |= IEEE80211_CHAN_NO_320MHZ; | 
|  | if (rd_flags & NL80211_RRF_NO_EHT) | 
|  | channel_flags |= IEEE80211_CHAN_NO_EHT; | 
|  | if (rd_flags & NL80211_RRF_DFS_CONCURRENT) | 
|  | channel_flags |= IEEE80211_CHAN_DFS_CONCURRENT; | 
|  | if (rd_flags & NL80211_RRF_NO_6GHZ_VLP_CLIENT) | 
|  | channel_flags |= IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT; | 
|  | if (rd_flags & NL80211_RRF_NO_6GHZ_AFC_CLIENT) | 
|  | channel_flags |= IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT; | 
|  | if (rd_flags & NL80211_RRF_PSD) | 
|  | channel_flags |= IEEE80211_CHAN_PSD; | 
|  | if (rd_flags & NL80211_RRF_ALLOW_6GHZ_VLP_AP) | 
|  | channel_flags |= IEEE80211_CHAN_ALLOW_6GHZ_VLP_AP; | 
|  | if (rd_flags & NL80211_RRF_ALLOW_20MHZ_ACTIVITY) | 
|  | channel_flags |= IEEE80211_CHAN_ALLOW_20MHZ_ACTIVITY; | 
|  | return channel_flags; | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_reg_rule * | 
|  | freq_reg_info_regd(u32 center_freq, | 
|  | const struct ieee80211_regdomain *regd, u32 bw) | 
|  | { | 
|  | int i; | 
|  | bool band_rule_found = false; | 
|  | bool bw_fits = false; | 
|  |  | 
|  | if (!regd) | 
|  | return ERR_PTR(-EINVAL); | 
|  |  | 
|  | for (i = 0; i < regd->n_reg_rules; i++) { | 
|  | const struct ieee80211_reg_rule *rr; | 
|  | const struct ieee80211_freq_range *fr = NULL; | 
|  |  | 
|  | rr = ®d->reg_rules[i]; | 
|  | fr = &rr->freq_range; | 
|  |  | 
|  | /* | 
|  | * We only need to know if one frequency rule was | 
|  | * in center_freq's band, that's enough, so let's | 
|  | * not overwrite it once found | 
|  | */ | 
|  | if (!band_rule_found) | 
|  | band_rule_found = freq_in_rule_band(fr, center_freq); | 
|  |  | 
|  | bw_fits = cfg80211_does_bw_fit_range(fr, center_freq, bw); | 
|  |  | 
|  | if (band_rule_found && bw_fits) | 
|  | return rr; | 
|  | } | 
|  |  | 
|  | if (!band_rule_found) | 
|  | return ERR_PTR(-ERANGE); | 
|  |  | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_reg_rule * | 
|  | __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy); | 
|  | static const u32 bws[] = {0, 1, 2, 4, 5, 8, 10, 16, 20}; | 
|  | const struct ieee80211_reg_rule *reg_rule = ERR_PTR(-ERANGE); | 
|  | int i = ARRAY_SIZE(bws) - 1; | 
|  | u32 bw; | 
|  |  | 
|  | for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) { | 
|  | reg_rule = freq_reg_info_regd(center_freq, regd, bw); | 
|  | if (!IS_ERR(reg_rule)) | 
|  | return reg_rule; | 
|  | } | 
|  |  | 
|  | return reg_rule; | 
|  | } | 
|  |  | 
|  | const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, | 
|  | u32 center_freq) | 
|  | { | 
|  | u32 min_bw = center_freq < MHZ_TO_KHZ(1000) ? 1 : 20; | 
|  |  | 
|  | return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw)); | 
|  | } | 
|  | EXPORT_SYMBOL(freq_reg_info); | 
|  |  | 
|  | const char *reg_initiator_name(enum nl80211_reg_initiator initiator) | 
|  | { | 
|  | switch (initiator) { | 
|  | case NL80211_REGDOM_SET_BY_CORE: | 
|  | return "core"; | 
|  | case NL80211_REGDOM_SET_BY_USER: | 
|  | return "user"; | 
|  | case NL80211_REGDOM_SET_BY_DRIVER: | 
|  | return "driver"; | 
|  | case NL80211_REGDOM_SET_BY_COUNTRY_IE: | 
|  | return "country element"; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return "bug"; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(reg_initiator_name); | 
|  |  | 
|  | static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd, | 
|  | const struct ieee80211_reg_rule *reg_rule, | 
|  | const struct ieee80211_channel *chan) | 
|  | { | 
|  | const struct ieee80211_freq_range *freq_range = NULL; | 
|  | u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0; | 
|  | bool is_s1g = chan->band == NL80211_BAND_S1GHZ; | 
|  |  | 
|  | freq_range = ®_rule->freq_range; | 
|  |  | 
|  | max_bandwidth_khz = freq_range->max_bandwidth_khz; | 
|  | center_freq_khz = ieee80211_channel_to_khz(chan); | 
|  | /* Check if auto calculation requested */ | 
|  | if (reg_rule->flags & NL80211_RRF_AUTO_BW) | 
|  | max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); | 
|  |  | 
|  | /* If we get a reg_rule we can assume that at least 5Mhz fit */ | 
|  | if (!cfg80211_does_bw_fit_range(freq_range, | 
|  | center_freq_khz, | 
|  | MHZ_TO_KHZ(10))) | 
|  | bw_flags |= IEEE80211_CHAN_NO_10MHZ; | 
|  | if (!cfg80211_does_bw_fit_range(freq_range, | 
|  | center_freq_khz, | 
|  | MHZ_TO_KHZ(20))) | 
|  | bw_flags |= IEEE80211_CHAN_NO_20MHZ; | 
|  |  | 
|  | if (is_s1g) { | 
|  | /* S1G is strict about non overlapping channels. We can | 
|  | * calculate which bandwidth is allowed per channel by finding | 
|  | * the largest bandwidth which cleanly divides the freq_range. | 
|  | */ | 
|  | int edge_offset; | 
|  | int ch_bw = max_bandwidth_khz; | 
|  |  | 
|  | while (ch_bw) { | 
|  | edge_offset = (center_freq_khz - ch_bw / 2) - | 
|  | freq_range->start_freq_khz; | 
|  | if (edge_offset % ch_bw == 0) { | 
|  | switch (KHZ_TO_MHZ(ch_bw)) { | 
|  | case 1: | 
|  | bw_flags |= IEEE80211_CHAN_1MHZ; | 
|  | break; | 
|  | case 2: | 
|  | bw_flags |= IEEE80211_CHAN_2MHZ; | 
|  | break; | 
|  | case 4: | 
|  | bw_flags |= IEEE80211_CHAN_4MHZ; | 
|  | break; | 
|  | case 8: | 
|  | bw_flags |= IEEE80211_CHAN_8MHZ; | 
|  | break; | 
|  | case 16: | 
|  | bw_flags |= IEEE80211_CHAN_16MHZ; | 
|  | break; | 
|  | default: | 
|  | /* If we got here, no bandwidths fit on | 
|  | * this frequency, ie. band edge. | 
|  | */ | 
|  | bw_flags |= IEEE80211_CHAN_DISABLED; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | } | 
|  | ch_bw /= 2; | 
|  | } | 
|  | } else { | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(10)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_10MHZ; | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(20)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_20MHZ; | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(40)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_HT40; | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(80)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_80MHZ; | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(160)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_160MHZ; | 
|  | if (max_bandwidth_khz < MHZ_TO_KHZ(320)) | 
|  | bw_flags |= IEEE80211_CHAN_NO_320MHZ; | 
|  | } | 
|  | return bw_flags; | 
|  | } | 
|  |  | 
|  | static void handle_channel_single_rule(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator, | 
|  | struct ieee80211_channel *chan, | 
|  | u32 flags, | 
|  | struct regulatory_request *lr, | 
|  | struct wiphy *request_wiphy, | 
|  | const struct ieee80211_reg_rule *reg_rule) | 
|  | { | 
|  | u32 bw_flags = 0; | 
|  | const struct ieee80211_power_rule *power_rule = NULL; | 
|  | const struct ieee80211_regdomain *regd; | 
|  |  | 
|  | regd = reg_get_regdomain(wiphy); | 
|  |  | 
|  | power_rule = ®_rule->power_rule; | 
|  | bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan); | 
|  |  | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | 
|  | request_wiphy && request_wiphy == wiphy && | 
|  | request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | 
|  | /* | 
|  | * This guarantees the driver's requested regulatory domain | 
|  | * will always be used as a base for further regulatory | 
|  | * settings | 
|  | */ | 
|  | chan->flags = chan->orig_flags = | 
|  | map_regdom_flags(reg_rule->flags) | bw_flags; | 
|  | chan->max_antenna_gain = chan->orig_mag = | 
|  | (int) MBI_TO_DBI(power_rule->max_antenna_gain); | 
|  | chan->max_reg_power = chan->max_power = chan->orig_mpwr = | 
|  | (int) MBM_TO_DBM(power_rule->max_eirp); | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_RADAR) { | 
|  | chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | 
|  | if (reg_rule->dfs_cac_ms) | 
|  | chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | 
|  | } | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_PSD) | 
|  | chan->psd = reg_rule->psd; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | chan->dfs_state = NL80211_DFS_USABLE; | 
|  | chan->dfs_state_entered = jiffies; | 
|  |  | 
|  | chan->beacon_found = false; | 
|  | chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); | 
|  | chan->max_antenna_gain = | 
|  | min_t(int, chan->orig_mag, | 
|  | MBI_TO_DBI(power_rule->max_antenna_gain)); | 
|  | chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_RADAR) { | 
|  | if (reg_rule->dfs_cac_ms) | 
|  | chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | 
|  | else | 
|  | chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | 
|  | } | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_PSD) | 
|  | chan->psd = reg_rule->psd; | 
|  |  | 
|  | if (chan->orig_mpwr) { | 
|  | /* | 
|  | * Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER | 
|  | * will always follow the passed country IE power settings. | 
|  | */ | 
|  | if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER) | 
|  | chan->max_power = chan->max_reg_power; | 
|  | else | 
|  | chan->max_power = min(chan->orig_mpwr, | 
|  | chan->max_reg_power); | 
|  | } else | 
|  | chan->max_power = chan->max_reg_power; | 
|  | } | 
|  |  | 
|  | static void handle_channel_adjacent_rules(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator, | 
|  | struct ieee80211_channel *chan, | 
|  | u32 flags, | 
|  | struct regulatory_request *lr, | 
|  | struct wiphy *request_wiphy, | 
|  | const struct ieee80211_reg_rule *rrule1, | 
|  | const struct ieee80211_reg_rule *rrule2, | 
|  | struct ieee80211_freq_range *comb_range) | 
|  | { | 
|  | u32 bw_flags1 = 0; | 
|  | u32 bw_flags2 = 0; | 
|  | const struct ieee80211_power_rule *power_rule1 = NULL; | 
|  | const struct ieee80211_power_rule *power_rule2 = NULL; | 
|  | const struct ieee80211_regdomain *regd; | 
|  |  | 
|  | regd = reg_get_regdomain(wiphy); | 
|  |  | 
|  | power_rule1 = &rrule1->power_rule; | 
|  | power_rule2 = &rrule2->power_rule; | 
|  | bw_flags1 = reg_rule_to_chan_bw_flags(regd, rrule1, chan); | 
|  | bw_flags2 = reg_rule_to_chan_bw_flags(regd, rrule2, chan); | 
|  |  | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | 
|  | request_wiphy && request_wiphy == wiphy && | 
|  | request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | 
|  | /* This guarantees the driver's requested regulatory domain | 
|  | * will always be used as a base for further regulatory | 
|  | * settings | 
|  | */ | 
|  | chan->flags = | 
|  | map_regdom_flags(rrule1->flags) | | 
|  | map_regdom_flags(rrule2->flags) | | 
|  | bw_flags1 | | 
|  | bw_flags2; | 
|  | chan->orig_flags = chan->flags; | 
|  | chan->max_antenna_gain = | 
|  | min_t(int, MBI_TO_DBI(power_rule1->max_antenna_gain), | 
|  | MBI_TO_DBI(power_rule2->max_antenna_gain)); | 
|  | chan->orig_mag = chan->max_antenna_gain; | 
|  | chan->max_reg_power = | 
|  | min_t(int, MBM_TO_DBM(power_rule1->max_eirp), | 
|  | MBM_TO_DBM(power_rule2->max_eirp)); | 
|  | chan->max_power = chan->max_reg_power; | 
|  | chan->orig_mpwr = chan->max_reg_power; | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_RADAR) { | 
|  | chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | 
|  | if (rrule1->dfs_cac_ms || rrule2->dfs_cac_ms) | 
|  | chan->dfs_cac_ms = max_t(unsigned int, | 
|  | rrule1->dfs_cac_ms, | 
|  | rrule2->dfs_cac_ms); | 
|  | } | 
|  |  | 
|  | if ((rrule1->flags & NL80211_RRF_PSD) && | 
|  | (rrule2->flags & NL80211_RRF_PSD)) | 
|  | chan->psd = min_t(s8, rrule1->psd, rrule2->psd); | 
|  | else | 
|  | chan->flags &= ~NL80211_RRF_PSD; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | chan->dfs_state = NL80211_DFS_USABLE; | 
|  | chan->dfs_state_entered = jiffies; | 
|  |  | 
|  | chan->beacon_found = false; | 
|  | chan->flags = flags | bw_flags1 | bw_flags2 | | 
|  | map_regdom_flags(rrule1->flags) | | 
|  | map_regdom_flags(rrule2->flags); | 
|  |  | 
|  | /* reg_rule_to_chan_bw_flags may forbids 10 and forbids 20 MHz | 
|  | * (otherwise no adj. rule case), recheck therefore | 
|  | */ | 
|  | if (cfg80211_does_bw_fit_range(comb_range, | 
|  | ieee80211_channel_to_khz(chan), | 
|  | MHZ_TO_KHZ(10))) | 
|  | chan->flags &= ~IEEE80211_CHAN_NO_10MHZ; | 
|  | if (cfg80211_does_bw_fit_range(comb_range, | 
|  | ieee80211_channel_to_khz(chan), | 
|  | MHZ_TO_KHZ(20))) | 
|  | chan->flags &= ~IEEE80211_CHAN_NO_20MHZ; | 
|  |  | 
|  | chan->max_antenna_gain = | 
|  | min_t(int, chan->orig_mag, | 
|  | min_t(int, | 
|  | MBI_TO_DBI(power_rule1->max_antenna_gain), | 
|  | MBI_TO_DBI(power_rule2->max_antenna_gain))); | 
|  | chan->max_reg_power = min_t(int, | 
|  | MBM_TO_DBM(power_rule1->max_eirp), | 
|  | MBM_TO_DBM(power_rule2->max_eirp)); | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_RADAR) { | 
|  | if (rrule1->dfs_cac_ms || rrule2->dfs_cac_ms) | 
|  | chan->dfs_cac_ms = max_t(unsigned int, | 
|  | rrule1->dfs_cac_ms, | 
|  | rrule2->dfs_cac_ms); | 
|  | else | 
|  | chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | 
|  | } | 
|  |  | 
|  | if (chan->orig_mpwr) { | 
|  | /* Devices that use REGULATORY_COUNTRY_IE_FOLLOW_POWER | 
|  | * will always follow the passed country IE power settings. | 
|  | */ | 
|  | if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_FOLLOW_POWER) | 
|  | chan->max_power = chan->max_reg_power; | 
|  | else | 
|  | chan->max_power = min(chan->orig_mpwr, | 
|  | chan->max_reg_power); | 
|  | } else { | 
|  | chan->max_power = chan->max_reg_power; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Note that right now we assume the desired channel bandwidth | 
|  | * is always 20 MHz for each individual channel (HT40 uses 20 MHz | 
|  | * per channel, the primary and the extension channel). | 
|  | */ | 
|  | static void handle_channel(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator, | 
|  | struct ieee80211_channel *chan) | 
|  | { | 
|  | const u32 orig_chan_freq = ieee80211_channel_to_khz(chan); | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  | struct wiphy *request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | 
|  | const struct ieee80211_reg_rule *rrule = NULL; | 
|  | const struct ieee80211_reg_rule *rrule1 = NULL; | 
|  | const struct ieee80211_reg_rule *rrule2 = NULL; | 
|  |  | 
|  | u32 flags = chan->orig_flags; | 
|  |  | 
|  | rrule = freq_reg_info(wiphy, orig_chan_freq); | 
|  | if (IS_ERR(rrule)) { | 
|  | /* check for adjacent match, therefore get rules for | 
|  | * chan - 20 MHz and chan + 20 MHz and test | 
|  | * if reg rules are adjacent | 
|  | */ | 
|  | rrule1 = freq_reg_info(wiphy, | 
|  | orig_chan_freq - MHZ_TO_KHZ(20)); | 
|  | rrule2 = freq_reg_info(wiphy, | 
|  | orig_chan_freq + MHZ_TO_KHZ(20)); | 
|  | if (!IS_ERR(rrule1) && !IS_ERR(rrule2)) { | 
|  | struct ieee80211_freq_range comb_range; | 
|  |  | 
|  | if (rrule1->freq_range.end_freq_khz != | 
|  | rrule2->freq_range.start_freq_khz) | 
|  | goto disable_chan; | 
|  |  | 
|  | comb_range.start_freq_khz = | 
|  | rrule1->freq_range.start_freq_khz; | 
|  | comb_range.end_freq_khz = | 
|  | rrule2->freq_range.end_freq_khz; | 
|  | comb_range.max_bandwidth_khz = | 
|  | min_t(u32, | 
|  | rrule1->freq_range.max_bandwidth_khz, | 
|  | rrule2->freq_range.max_bandwidth_khz); | 
|  |  | 
|  | if (!cfg80211_does_bw_fit_range(&comb_range, | 
|  | orig_chan_freq, | 
|  | MHZ_TO_KHZ(20))) | 
|  | goto disable_chan; | 
|  |  | 
|  | handle_channel_adjacent_rules(wiphy, initiator, chan, | 
|  | flags, lr, request_wiphy, | 
|  | rrule1, rrule2, | 
|  | &comb_range); | 
|  | return; | 
|  | } | 
|  |  | 
|  | disable_chan: | 
|  | /* We will disable all channels that do not match our | 
|  | * received regulatory rule unless the hint is coming | 
|  | * from a Country IE and the Country IE had no information | 
|  | * about a band. The IEEE 802.11 spec allows for an AP | 
|  | * to send only a subset of the regulatory rules allowed, | 
|  | * so an AP in the US that only supports 2.4 GHz may only send | 
|  | * a country IE with information for the 2.4 GHz band | 
|  | * while 5 GHz is still supported. | 
|  | */ | 
|  | if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | PTR_ERR(rrule) == -ERANGE) | 
|  | return; | 
|  |  | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | 
|  | request_wiphy && request_wiphy == wiphy && | 
|  | request_wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | 
|  | pr_debug("Disabling freq %d.%03d MHz for good\n", | 
|  | chan->center_freq, chan->freq_offset); | 
|  | chan->orig_flags |= IEEE80211_CHAN_DISABLED; | 
|  | chan->flags = chan->orig_flags; | 
|  | } else { | 
|  | pr_debug("Disabling freq %d.%03d MHz\n", | 
|  | chan->center_freq, chan->freq_offset); | 
|  | chan->flags |= IEEE80211_CHAN_DISABLED; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | handle_channel_single_rule(wiphy, initiator, chan, flags, lr, | 
|  | request_wiphy, rrule); | 
|  | } | 
|  |  | 
|  | static void handle_band(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator, | 
|  | struct ieee80211_supported_band *sband) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!sband) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) | 
|  | handle_channel(wiphy, initiator, &sband->channels[i]); | 
|  | } | 
|  |  | 
|  | static bool reg_request_cell_base(struct regulatory_request *request) | 
|  | { | 
|  | if (request->initiator != NL80211_REGDOM_SET_BY_USER) | 
|  | return false; | 
|  | return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; | 
|  | } | 
|  |  | 
|  | bool reg_last_request_cell_base(void) | 
|  | { | 
|  | return reg_request_cell_base(get_last_request()); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_CFG80211_REG_CELLULAR_HINTS | 
|  | /* Core specific check */ | 
|  | static enum reg_request_treatment | 
|  | reg_ignore_cell_hint(struct regulatory_request *pending_request) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (!reg_num_devs_support_basehint) | 
|  | return REG_REQ_IGNORE; | 
|  |  | 
|  | if (reg_request_cell_base(lr) && | 
|  | !regdom_changes(pending_request->alpha2)) | 
|  | return REG_REQ_ALREADY_SET; | 
|  |  | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | /* Device specific check */ | 
|  | static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) | 
|  | { | 
|  | return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS); | 
|  | } | 
|  | #else | 
|  | static enum reg_request_treatment | 
|  | reg_ignore_cell_hint(struct regulatory_request *pending_request) | 
|  | { | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) | 
|  | { | 
|  | return true; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static bool wiphy_strict_alpha2_regd(struct wiphy *wiphy) | 
|  | { | 
|  | if (wiphy->regulatory_flags & REGULATORY_STRICT_REG && | 
|  | !(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG)) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool ignore_reg_update(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | 
|  | return true; | 
|  |  | 
|  | if (!lr) { | 
|  | pr_debug("Ignoring regulatory request set by %s since last_request is not set\n", | 
|  | reg_initiator_name(initiator)); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (initiator == NL80211_REGDOM_SET_BY_CORE && | 
|  | wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) { | 
|  | pr_debug("Ignoring regulatory request set by %s since the driver uses its own custom regulatory domain\n", | 
|  | reg_initiator_name(initiator)); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * wiphy->regd will be set once the device has its own | 
|  | * desired regulatory domain set | 
|  | */ | 
|  | if (wiphy_strict_alpha2_regd(wiphy) && !wiphy->regd && | 
|  | initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | !is_world_regdom(lr->alpha2)) { | 
|  | pr_debug("Ignoring regulatory request set by %s since the driver requires its own regulatory domain to be set first\n", | 
|  | reg_initiator_name(initiator)); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | if (reg_request_cell_base(lr)) | 
|  | return reg_dev_ignore_cell_hint(wiphy); | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool reg_is_world_roaming(struct wiphy *wiphy) | 
|  | { | 
|  | const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); | 
|  | const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) | 
|  | return true; | 
|  |  | 
|  | if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void reg_call_notifier(struct wiphy *wiphy, | 
|  | struct regulatory_request *request) | 
|  | { | 
|  | if (wiphy->reg_notifier) | 
|  | wiphy->reg_notifier(wiphy, request); | 
|  | } | 
|  |  | 
|  | static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, | 
|  | struct reg_beacon *reg_beacon) | 
|  | { | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct ieee80211_channel *chan; | 
|  | bool channel_changed = false; | 
|  | struct ieee80211_channel chan_before; | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | sband = wiphy->bands[reg_beacon->chan.band]; | 
|  | chan = &sband->channels[chan_idx]; | 
|  |  | 
|  | if (likely(!ieee80211_channel_equal(chan, ®_beacon->chan))) | 
|  | return; | 
|  |  | 
|  | if (chan->beacon_found) | 
|  | return; | 
|  |  | 
|  | chan->beacon_found = true; | 
|  |  | 
|  | if (!reg_is_world_roaming(wiphy)) | 
|  | return; | 
|  |  | 
|  | if (wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS) | 
|  | return; | 
|  |  | 
|  | chan_before = *chan; | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_NO_IR) { | 
|  | chan->flags &= ~IEEE80211_CHAN_NO_IR; | 
|  | channel_changed = true; | 
|  | } | 
|  |  | 
|  | if (channel_changed) { | 
|  | nl80211_send_beacon_hint_event(wiphy, &chan_before, chan); | 
|  | if (wiphy->flags & WIPHY_FLAG_CHANNEL_CHANGE_ON_BEACON) | 
|  | reg_call_notifier(wiphy, lr); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called when a scan on a wiphy finds a beacon on | 
|  | * new channel | 
|  | */ | 
|  | static void wiphy_update_new_beacon(struct wiphy *wiphy, | 
|  | struct reg_beacon *reg_beacon) | 
|  | { | 
|  | unsigned int i; | 
|  | struct ieee80211_supported_band *sband; | 
|  |  | 
|  | if (!wiphy->bands[reg_beacon->chan.band]) | 
|  | return; | 
|  |  | 
|  | sband = wiphy->bands[reg_beacon->chan.band]; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) | 
|  | handle_reg_beacon(wiphy, i, reg_beacon); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called upon reg changes or a new wiphy is added | 
|  | */ | 
|  | static void wiphy_update_beacon_reg(struct wiphy *wiphy) | 
|  | { | 
|  | unsigned int i; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct reg_beacon *reg_beacon; | 
|  |  | 
|  | list_for_each_entry(reg_beacon, ®_beacon_list, list) { | 
|  | if (!wiphy->bands[reg_beacon->chan.band]) | 
|  | continue; | 
|  | sband = wiphy->bands[reg_beacon->chan.band]; | 
|  | for (i = 0; i < sband->n_channels; i++) | 
|  | handle_reg_beacon(wiphy, i, reg_beacon); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Reap the advantages of previously found beacons */ | 
|  | static void reg_process_beacons(struct wiphy *wiphy) | 
|  | { | 
|  | /* | 
|  | * Means we are just firing up cfg80211, so no beacons would | 
|  | * have been processed yet. | 
|  | */ | 
|  | if (!last_request) | 
|  | return; | 
|  | wiphy_update_beacon_reg(wiphy); | 
|  | } | 
|  |  | 
|  | static bool is_ht40_allowed(struct ieee80211_channel *chan) | 
|  | { | 
|  | if (!chan) | 
|  | return false; | 
|  | if (chan->flags & IEEE80211_CHAN_DISABLED) | 
|  | return false; | 
|  | /* This would happen when regulatory rules disallow HT40 completely */ | 
|  | if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40) | 
|  | return false; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void reg_process_ht_flags_channel(struct wiphy *wiphy, | 
|  | struct ieee80211_channel *channel) | 
|  | { | 
|  | struct ieee80211_supported_band *sband = wiphy->bands[channel->band]; | 
|  | struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; | 
|  | const struct ieee80211_regdomain *regd; | 
|  | unsigned int i; | 
|  | u32 flags; | 
|  |  | 
|  | if (!is_ht40_allowed(channel)) { | 
|  | channel->flags |= IEEE80211_CHAN_NO_HT40; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We need to ensure the extension channels exist to | 
|  | * be able to use HT40- or HT40+, this finds them (or not) | 
|  | */ | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | struct ieee80211_channel *c = &sband->channels[i]; | 
|  |  | 
|  | if (c->center_freq == (channel->center_freq - 20)) | 
|  | channel_before = c; | 
|  | if (c->center_freq == (channel->center_freq + 20)) | 
|  | channel_after = c; | 
|  | } | 
|  |  | 
|  | flags = 0; | 
|  | regd = get_wiphy_regdom(wiphy); | 
|  | if (regd) { | 
|  | const struct ieee80211_reg_rule *reg_rule = | 
|  | freq_reg_info_regd(MHZ_TO_KHZ(channel->center_freq), | 
|  | regd, MHZ_TO_KHZ(20)); | 
|  |  | 
|  | if (!IS_ERR(reg_rule)) | 
|  | flags = reg_rule->flags; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Please note that this assumes target bandwidth is 20 MHz, | 
|  | * if that ever changes we also need to change the below logic | 
|  | * to include that as well. | 
|  | */ | 
|  | if (!is_ht40_allowed(channel_before) || | 
|  | flags & NL80211_RRF_NO_HT40MINUS) | 
|  | channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; | 
|  | else | 
|  | channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; | 
|  |  | 
|  | if (!is_ht40_allowed(channel_after) || | 
|  | flags & NL80211_RRF_NO_HT40PLUS) | 
|  | channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; | 
|  | else | 
|  | channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; | 
|  | } | 
|  |  | 
|  | static void reg_process_ht_flags_band(struct wiphy *wiphy, | 
|  | struct ieee80211_supported_band *sband) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!sband) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < sband->n_channels; i++) | 
|  | reg_process_ht_flags_channel(wiphy, &sband->channels[i]); | 
|  | } | 
|  |  | 
|  | static void reg_process_ht_flags(struct wiphy *wiphy) | 
|  | { | 
|  | enum nl80211_band band; | 
|  |  | 
|  | if (!wiphy) | 
|  | return; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) | 
|  | reg_process_ht_flags_band(wiphy, wiphy->bands[band]); | 
|  | } | 
|  |  | 
|  | static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev) | 
|  | { | 
|  | struct cfg80211_chan_def chandef = {}; | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | enum nl80211_iftype iftype; | 
|  | bool ret; | 
|  | int link; | 
|  |  | 
|  | iftype = wdev->iftype; | 
|  |  | 
|  | /* make sure the interface is active */ | 
|  | if (!wdev->netdev || !netif_running(wdev->netdev)) | 
|  | return true; | 
|  |  | 
|  | for (link = 0; link < ARRAY_SIZE(wdev->links); link++) { | 
|  | struct ieee80211_channel *chan; | 
|  |  | 
|  | if (!wdev->valid_links && link > 0) | 
|  | break; | 
|  | if (wdev->valid_links && !(wdev->valid_links & BIT(link))) | 
|  | continue; | 
|  | switch (iftype) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | if (!wdev->links[link].ap.beacon_interval) | 
|  | continue; | 
|  | chandef = wdev->links[link].ap.chandef; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!wdev->u.mesh.beacon_interval) | 
|  | continue; | 
|  | chandef = wdev->u.mesh.chandef; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | if (!wdev->u.ibss.ssid_len) | 
|  | continue; | 
|  | chandef = wdev->u.ibss.chandef; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | /* Maybe we could consider disabling that link only? */ | 
|  | if (!wdev->links[link].client.current_bss) | 
|  | continue; | 
|  |  | 
|  | chan = wdev->links[link].client.current_bss->pub.channel; | 
|  | if (!chan) | 
|  | continue; | 
|  |  | 
|  | if (!rdev->ops->get_channel || | 
|  | rdev_get_channel(rdev, wdev, link, &chandef)) | 
|  | cfg80211_chandef_create(&chandef, chan, | 
|  | NL80211_CHAN_NO_HT); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | /* no enforcement required */ | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | if (!wdev->u.ocb.chandef.chan) | 
|  | continue; | 
|  | chandef = wdev->u.ocb.chandef; | 
|  | break; | 
|  | case NL80211_IFTYPE_NAN: | 
|  | /* we have no info, but NAN is also pretty universal */ | 
|  | continue; | 
|  | default: | 
|  | /* others not implemented for now */ | 
|  | WARN_ON_ONCE(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (iftype) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | ret = cfg80211_reg_can_beacon_relax(wiphy, &chandef, | 
|  | iftype); | 
|  | if (!ret) | 
|  | return ret; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | ret = cfg80211_chandef_usable(wiphy, &chandef, | 
|  | IEEE80211_CHAN_DISABLED); | 
|  | if (!ret) | 
|  | return ret; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void reg_leave_invalid_chans(struct wiphy *wiphy) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | guard(wiphy)(wiphy); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) | 
|  | if (!reg_wdev_chan_valid(wiphy, wdev)) | 
|  | cfg80211_leave(rdev, wdev); | 
|  | } | 
|  |  | 
|  | static void reg_check_chans_work(struct work_struct *work) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | pr_debug("Verifying active interfaces after reg change\n"); | 
|  | rtnl_lock(); | 
|  |  | 
|  | for_each_rdev(rdev) | 
|  | reg_leave_invalid_chans(&rdev->wiphy); | 
|  |  | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | void reg_check_channels(void) | 
|  | { | 
|  | /* | 
|  | * Give usermode a chance to do something nicer (move to another | 
|  | * channel, orderly disconnection), before forcing a disconnection. | 
|  | */ | 
|  | mod_delayed_work(system_power_efficient_wq, | 
|  | ®_check_chans, | 
|  | msecs_to_jiffies(REG_ENFORCE_GRACE_MS)); | 
|  | } | 
|  |  | 
|  | static void wiphy_update_regulatory(struct wiphy *wiphy, | 
|  | enum nl80211_reg_initiator initiator) | 
|  | { | 
|  | enum nl80211_band band; | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (ignore_reg_update(wiphy, initiator)) { | 
|  | /* | 
|  | * Regulatory updates set by CORE are ignored for custom | 
|  | * regulatory cards. Let us notify the changes to the driver, | 
|  | * as some drivers used this to restore its orig_* reg domain. | 
|  | */ | 
|  | if (initiator == NL80211_REGDOM_SET_BY_CORE && | 
|  | wiphy->regulatory_flags & REGULATORY_CUSTOM_REG && | 
|  | !(wiphy->regulatory_flags & | 
|  | REGULATORY_WIPHY_SELF_MANAGED)) | 
|  | reg_call_notifier(wiphy, lr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | lr->dfs_region = get_cfg80211_regdom()->dfs_region; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) | 
|  | handle_band(wiphy, initiator, wiphy->bands[band]); | 
|  |  | 
|  | reg_process_beacons(wiphy); | 
|  | reg_process_ht_flags(wiphy); | 
|  | reg_call_notifier(wiphy, lr); | 
|  | } | 
|  |  | 
|  | static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct wiphy *wiphy; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | wiphy = &rdev->wiphy; | 
|  | wiphy_update_regulatory(wiphy, initiator); | 
|  | } | 
|  |  | 
|  | reg_check_channels(); | 
|  | } | 
|  |  | 
|  | static void handle_channel_custom(struct wiphy *wiphy, | 
|  | struct ieee80211_channel *chan, | 
|  | const struct ieee80211_regdomain *regd, | 
|  | u32 min_bw) | 
|  | { | 
|  | u32 bw_flags = 0; | 
|  | const struct ieee80211_reg_rule *reg_rule = NULL; | 
|  | const struct ieee80211_power_rule *power_rule = NULL; | 
|  | u32 bw, center_freq_khz; | 
|  |  | 
|  | center_freq_khz = ieee80211_channel_to_khz(chan); | 
|  | for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) { | 
|  | reg_rule = freq_reg_info_regd(center_freq_khz, regd, bw); | 
|  | if (!IS_ERR(reg_rule)) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (IS_ERR_OR_NULL(reg_rule)) { | 
|  | pr_debug("Disabling freq %d.%03d MHz as custom regd has no rule that fits it\n", | 
|  | chan->center_freq, chan->freq_offset); | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) { | 
|  | chan->flags |= IEEE80211_CHAN_DISABLED; | 
|  | } else { | 
|  | chan->orig_flags |= IEEE80211_CHAN_DISABLED; | 
|  | chan->flags = chan->orig_flags; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | power_rule = ®_rule->power_rule; | 
|  | bw_flags = reg_rule_to_chan_bw_flags(regd, reg_rule, chan); | 
|  |  | 
|  | chan->dfs_state_entered = jiffies; | 
|  | chan->dfs_state = NL80211_DFS_USABLE; | 
|  |  | 
|  | chan->beacon_found = false; | 
|  |  | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | 
|  | chan->flags = chan->orig_flags | bw_flags | | 
|  | map_regdom_flags(reg_rule->flags); | 
|  | else | 
|  | chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; | 
|  |  | 
|  | chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); | 
|  | chan->max_reg_power = chan->max_power = | 
|  | (int) MBM_TO_DBM(power_rule->max_eirp); | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_RADAR) { | 
|  | if (reg_rule->dfs_cac_ms) | 
|  | chan->dfs_cac_ms = reg_rule->dfs_cac_ms; | 
|  | else | 
|  | chan->dfs_cac_ms = IEEE80211_DFS_MIN_CAC_TIME_MS; | 
|  | } | 
|  |  | 
|  | if (chan->flags & IEEE80211_CHAN_PSD) | 
|  | chan->psd = reg_rule->psd; | 
|  |  | 
|  | chan->max_power = chan->max_reg_power; | 
|  | } | 
|  |  | 
|  | static void handle_band_custom(struct wiphy *wiphy, | 
|  | struct ieee80211_supported_band *sband, | 
|  | const struct ieee80211_regdomain *regd) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | if (!sband) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * We currently assume that you always want at least 20 MHz, | 
|  | * otherwise channel 12 might get enabled if this rule is | 
|  | * compatible to US, which permits 2402 - 2472 MHz. | 
|  | */ | 
|  | for (i = 0; i < sband->n_channels; i++) | 
|  | handle_channel_custom(wiphy, &sband->channels[i], regd, | 
|  | MHZ_TO_KHZ(20)); | 
|  | } | 
|  |  | 
|  | /* Used by drivers prior to wiphy registration */ | 
|  | void wiphy_apply_custom_regulatory(struct wiphy *wiphy, | 
|  | const struct ieee80211_regdomain *regd) | 
|  | { | 
|  | const struct ieee80211_regdomain *new_regd, *tmp; | 
|  | enum nl80211_band band; | 
|  | unsigned int bands_set = 0; | 
|  |  | 
|  | WARN(!(wiphy->regulatory_flags & REGULATORY_CUSTOM_REG), | 
|  | "wiphy should have REGULATORY_CUSTOM_REG\n"); | 
|  | wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | if (!wiphy->bands[band]) | 
|  | continue; | 
|  | handle_band_custom(wiphy, wiphy->bands[band], regd); | 
|  | bands_set++; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * no point in calling this if it won't have any effect | 
|  | * on your device's supported bands. | 
|  | */ | 
|  | WARN_ON(!bands_set); | 
|  | new_regd = reg_copy_regd(regd); | 
|  | if (IS_ERR(new_regd)) | 
|  | return; | 
|  |  | 
|  | rtnl_lock(); | 
|  | scoped_guard(wiphy, wiphy) { | 
|  | tmp = get_wiphy_regdom(wiphy); | 
|  | rcu_assign_pointer(wiphy->regd, new_regd); | 
|  | rcu_free_regdom(tmp); | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(wiphy_apply_custom_regulatory); | 
|  |  | 
|  | static void reg_set_request_processed(void) | 
|  | { | 
|  | bool need_more_processing = false; | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | lr->processed = true; | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | if (!list_empty(®_requests_list)) | 
|  | need_more_processing = true; | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | cancel_crda_timeout(); | 
|  |  | 
|  | if (need_more_processing) | 
|  | schedule_work(®_work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * reg_process_hint_core - process core regulatory requests | 
|  | * @core_request: a pending core regulatory request | 
|  | * | 
|  | * The wireless subsystem can use this function to process | 
|  | * a regulatory request issued by the regulatory core. | 
|  | * | 
|  | * Returns: %REG_REQ_OK or %REG_REQ_IGNORE, indicating if the | 
|  | *	hint was processed or ignored | 
|  | */ | 
|  | static enum reg_request_treatment | 
|  | reg_process_hint_core(struct regulatory_request *core_request) | 
|  | { | 
|  | if (reg_query_database(core_request)) { | 
|  | core_request->intersect = false; | 
|  | core_request->processed = false; | 
|  | reg_update_last_request(core_request); | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | static enum reg_request_treatment | 
|  | __reg_process_hint_user(struct regulatory_request *user_request) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (reg_request_cell_base(user_request)) | 
|  | return reg_ignore_cell_hint(user_request); | 
|  |  | 
|  | if (reg_request_cell_base(lr)) | 
|  | return REG_REQ_IGNORE; | 
|  |  | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) | 
|  | return REG_REQ_INTERSECT; | 
|  | /* | 
|  | * If the user knows better the user should set the regdom | 
|  | * to their country before the IE is picked up | 
|  | */ | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_USER && | 
|  | lr->intersect) | 
|  | return REG_REQ_IGNORE; | 
|  | /* | 
|  | * Process user requests only after previous user/driver/core | 
|  | * requests have been processed | 
|  | */ | 
|  | if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE || | 
|  | lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || | 
|  | lr->initiator == NL80211_REGDOM_SET_BY_USER) && | 
|  | regdom_changes(lr->alpha2)) | 
|  | return REG_REQ_IGNORE; | 
|  |  | 
|  | if (!regdom_changes(user_request->alpha2)) | 
|  | return REG_REQ_ALREADY_SET; | 
|  |  | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * reg_process_hint_user - process user regulatory requests | 
|  | * @user_request: a pending user regulatory request | 
|  | * | 
|  | * The wireless subsystem can use this function to process | 
|  | * a regulatory request initiated by userspace. | 
|  | * | 
|  | * Returns: %REG_REQ_OK or %REG_REQ_IGNORE, indicating if the | 
|  | *	hint was processed or ignored | 
|  | */ | 
|  | static enum reg_request_treatment | 
|  | reg_process_hint_user(struct regulatory_request *user_request) | 
|  | { | 
|  | enum reg_request_treatment treatment; | 
|  |  | 
|  | treatment = __reg_process_hint_user(user_request); | 
|  | if (treatment == REG_REQ_IGNORE || | 
|  | treatment == REG_REQ_ALREADY_SET) | 
|  | return REG_REQ_IGNORE; | 
|  |  | 
|  | user_request->intersect = treatment == REG_REQ_INTERSECT; | 
|  | user_request->processed = false; | 
|  |  | 
|  | if (reg_query_database(user_request)) { | 
|  | reg_update_last_request(user_request); | 
|  | user_alpha2[0] = user_request->alpha2[0]; | 
|  | user_alpha2[1] = user_request->alpha2[1]; | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | static enum reg_request_treatment | 
|  | __reg_process_hint_driver(struct regulatory_request *driver_request) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) { | 
|  | if (regdom_changes(driver_request->alpha2)) | 
|  | return REG_REQ_OK; | 
|  | return REG_REQ_ALREADY_SET; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This would happen if you unplug and plug your card | 
|  | * back in or if you add a new device for which the previously | 
|  | * loaded card also agrees on the regulatory domain. | 
|  | */ | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && | 
|  | !regdom_changes(driver_request->alpha2)) | 
|  | return REG_REQ_ALREADY_SET; | 
|  |  | 
|  | return REG_REQ_INTERSECT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * reg_process_hint_driver - process driver regulatory requests | 
|  | * @wiphy: the wireless device for the regulatory request | 
|  | * @driver_request: a pending driver regulatory request | 
|  | * | 
|  | * The wireless subsystem can use this function to process | 
|  | * a regulatory request issued by an 802.11 driver. | 
|  | * | 
|  | * Returns: one of the different reg request treatment values. | 
|  | */ | 
|  | static enum reg_request_treatment | 
|  | reg_process_hint_driver(struct wiphy *wiphy, | 
|  | struct regulatory_request *driver_request) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd, *tmp; | 
|  | enum reg_request_treatment treatment; | 
|  |  | 
|  | treatment = __reg_process_hint_driver(driver_request); | 
|  |  | 
|  | switch (treatment) { | 
|  | case REG_REQ_OK: | 
|  | break; | 
|  | case REG_REQ_IGNORE: | 
|  | return REG_REQ_IGNORE; | 
|  | case REG_REQ_INTERSECT: | 
|  | case REG_REQ_ALREADY_SET: | 
|  | regd = reg_copy_regd(get_cfg80211_regdom()); | 
|  | if (IS_ERR(regd)) | 
|  | return REG_REQ_IGNORE; | 
|  |  | 
|  | tmp = get_wiphy_regdom(wiphy); | 
|  | ASSERT_RTNL(); | 
|  | scoped_guard(wiphy, wiphy) { | 
|  | rcu_assign_pointer(wiphy->regd, regd); | 
|  | } | 
|  | rcu_free_regdom(tmp); | 
|  | } | 
|  |  | 
|  |  | 
|  | driver_request->intersect = treatment == REG_REQ_INTERSECT; | 
|  | driver_request->processed = false; | 
|  |  | 
|  | /* | 
|  | * Since CRDA will not be called in this case as we already | 
|  | * have applied the requested regulatory domain before we just | 
|  | * inform userspace we have processed the request | 
|  | */ | 
|  | if (treatment == REG_REQ_ALREADY_SET) { | 
|  | nl80211_send_reg_change_event(driver_request); | 
|  | reg_update_last_request(driver_request); | 
|  | reg_set_request_processed(); | 
|  | return REG_REQ_ALREADY_SET; | 
|  | } | 
|  |  | 
|  | if (reg_query_database(driver_request)) { | 
|  | reg_update_last_request(driver_request); | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | static enum reg_request_treatment | 
|  | __reg_process_hint_country_ie(struct wiphy *wiphy, | 
|  | struct regulatory_request *country_ie_request) | 
|  | { | 
|  | struct wiphy *last_wiphy = NULL; | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (reg_request_cell_base(lr)) { | 
|  | /* Trust a Cell base station over the AP's country IE */ | 
|  | if (regdom_changes(country_ie_request->alpha2)) | 
|  | return REG_REQ_IGNORE; | 
|  | return REG_REQ_ALREADY_SET; | 
|  | } else { | 
|  | if (wiphy->regulatory_flags & REGULATORY_COUNTRY_IE_IGNORE) | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | if (unlikely(!is_an_alpha2(country_ie_request->alpha2))) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) | 
|  | return REG_REQ_OK; | 
|  |  | 
|  | last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | 
|  |  | 
|  | if (last_wiphy != wiphy) { | 
|  | /* | 
|  | * Two cards with two APs claiming different | 
|  | * Country IE alpha2s. We could | 
|  | * intersect them, but that seems unlikely | 
|  | * to be correct. Reject second one for now. | 
|  | */ | 
|  | if (regdom_changes(country_ie_request->alpha2)) | 
|  | return REG_REQ_IGNORE; | 
|  | return REG_REQ_ALREADY_SET; | 
|  | } | 
|  |  | 
|  | if (regdom_changes(country_ie_request->alpha2)) | 
|  | return REG_REQ_OK; | 
|  | return REG_REQ_ALREADY_SET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * reg_process_hint_country_ie - process regulatory requests from country IEs | 
|  | * @wiphy: the wireless device for the regulatory request | 
|  | * @country_ie_request: a regulatory request from a country IE | 
|  | * | 
|  | * The wireless subsystem can use this function to process | 
|  | * a regulatory request issued by a country Information Element. | 
|  | * | 
|  | * Returns: one of the different reg request treatment values. | 
|  | */ | 
|  | static enum reg_request_treatment | 
|  | reg_process_hint_country_ie(struct wiphy *wiphy, | 
|  | struct regulatory_request *country_ie_request) | 
|  | { | 
|  | enum reg_request_treatment treatment; | 
|  |  | 
|  | treatment = __reg_process_hint_country_ie(wiphy, country_ie_request); | 
|  |  | 
|  | switch (treatment) { | 
|  | case REG_REQ_OK: | 
|  | break; | 
|  | case REG_REQ_IGNORE: | 
|  | return REG_REQ_IGNORE; | 
|  | case REG_REQ_ALREADY_SET: | 
|  | reg_free_request(country_ie_request); | 
|  | return REG_REQ_ALREADY_SET; | 
|  | case REG_REQ_INTERSECT: | 
|  | /* | 
|  | * This doesn't happen yet, not sure we | 
|  | * ever want to support it for this case. | 
|  | */ | 
|  | WARN_ONCE(1, "Unexpected intersection for country elements"); | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | country_ie_request->intersect = false; | 
|  | country_ie_request->processed = false; | 
|  |  | 
|  | if (reg_query_database(country_ie_request)) { | 
|  | reg_update_last_request(country_ie_request); | 
|  | return REG_REQ_OK; | 
|  | } | 
|  |  | 
|  | return REG_REQ_IGNORE; | 
|  | } | 
|  |  | 
|  | bool reg_dfs_domain_same(struct wiphy *wiphy1, struct wiphy *wiphy2) | 
|  | { | 
|  | const struct ieee80211_regdomain *wiphy1_regd = NULL; | 
|  | const struct ieee80211_regdomain *wiphy2_regd = NULL; | 
|  | const struct ieee80211_regdomain *cfg80211_regd = NULL; | 
|  | bool dfs_domain_same; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | cfg80211_regd = rcu_dereference(cfg80211_regdomain); | 
|  | wiphy1_regd = rcu_dereference(wiphy1->regd); | 
|  | if (!wiphy1_regd) | 
|  | wiphy1_regd = cfg80211_regd; | 
|  |  | 
|  | wiphy2_regd = rcu_dereference(wiphy2->regd); | 
|  | if (!wiphy2_regd) | 
|  | wiphy2_regd = cfg80211_regd; | 
|  |  | 
|  | dfs_domain_same = wiphy1_regd->dfs_region == wiphy2_regd->dfs_region; | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return dfs_domain_same; | 
|  | } | 
|  |  | 
|  | static void reg_copy_dfs_chan_state(struct ieee80211_channel *dst_chan, | 
|  | struct ieee80211_channel *src_chan) | 
|  | { | 
|  | if (!(dst_chan->flags & IEEE80211_CHAN_RADAR) || | 
|  | !(src_chan->flags & IEEE80211_CHAN_RADAR)) | 
|  | return; | 
|  |  | 
|  | if (dst_chan->flags & IEEE80211_CHAN_DISABLED || | 
|  | src_chan->flags & IEEE80211_CHAN_DISABLED) | 
|  | return; | 
|  |  | 
|  | if (src_chan->center_freq == dst_chan->center_freq && | 
|  | dst_chan->dfs_state == NL80211_DFS_USABLE) { | 
|  | dst_chan->dfs_state = src_chan->dfs_state; | 
|  | dst_chan->dfs_state_entered = src_chan->dfs_state_entered; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wiphy_share_dfs_chan_state(struct wiphy *dst_wiphy, | 
|  | struct wiphy *src_wiphy) | 
|  | { | 
|  | struct ieee80211_supported_band *src_sband, *dst_sband; | 
|  | struct ieee80211_channel *src_chan, *dst_chan; | 
|  | int i, j, band; | 
|  |  | 
|  | if (!reg_dfs_domain_same(dst_wiphy, src_wiphy)) | 
|  | return; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | dst_sband = dst_wiphy->bands[band]; | 
|  | src_sband = src_wiphy->bands[band]; | 
|  | if (!dst_sband || !src_sband) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < dst_sband->n_channels; i++) { | 
|  | dst_chan = &dst_sband->channels[i]; | 
|  | for (j = 0; j < src_sband->n_channels; j++) { | 
|  | src_chan = &src_sband->channels[j]; | 
|  | reg_copy_dfs_chan_state(dst_chan, src_chan); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wiphy_all_share_dfs_chan_state(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | if (wiphy == &rdev->wiphy) | 
|  | continue; | 
|  | wiphy_share_dfs_chan_state(wiphy, &rdev->wiphy); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* This processes *all* regulatory hints */ | 
|  | static void reg_process_hint(struct regulatory_request *reg_request) | 
|  | { | 
|  | struct wiphy *wiphy = NULL; | 
|  | enum reg_request_treatment treatment; | 
|  | enum nl80211_reg_initiator initiator = reg_request->initiator; | 
|  |  | 
|  | if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) | 
|  | wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); | 
|  |  | 
|  | switch (initiator) { | 
|  | case NL80211_REGDOM_SET_BY_CORE: | 
|  | treatment = reg_process_hint_core(reg_request); | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_USER: | 
|  | treatment = reg_process_hint_user(reg_request); | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_DRIVER: | 
|  | if (!wiphy) | 
|  | goto out_free; | 
|  | treatment = reg_process_hint_driver(wiphy, reg_request); | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_COUNTRY_IE: | 
|  | if (!wiphy) | 
|  | goto out_free; | 
|  | treatment = reg_process_hint_country_ie(wiphy, reg_request); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "invalid initiator %d\n", initiator); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (treatment == REG_REQ_IGNORE) | 
|  | goto out_free; | 
|  |  | 
|  | WARN(treatment != REG_REQ_OK && treatment != REG_REQ_ALREADY_SET, | 
|  | "unexpected treatment value %d\n", treatment); | 
|  |  | 
|  | /* This is required so that the orig_* parameters are saved. | 
|  | * NOTE: treatment must be set for any case that reaches here! | 
|  | */ | 
|  | if (treatment == REG_REQ_ALREADY_SET && wiphy && | 
|  | wiphy->regulatory_flags & REGULATORY_STRICT_REG) { | 
|  | wiphy_update_regulatory(wiphy, initiator); | 
|  | wiphy_all_share_dfs_chan_state(wiphy); | 
|  | reg_check_channels(); | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | out_free: | 
|  | reg_free_request(reg_request); | 
|  | } | 
|  |  | 
|  | static void notify_self_managed_wiphys(struct regulatory_request *request) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct wiphy *wiphy; | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | wiphy = &rdev->wiphy; | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED && | 
|  | request->initiator == NL80211_REGDOM_SET_BY_USER) | 
|  | reg_call_notifier(wiphy, request); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* | 
|  | * Regulatory hints come on a first come first serve basis and we | 
|  | * must process each one atomically. | 
|  | */ | 
|  | static void reg_process_pending_hints(void) | 
|  | { | 
|  | struct regulatory_request *reg_request, *lr; | 
|  |  | 
|  | lr = get_last_request(); | 
|  |  | 
|  | /* When last_request->processed becomes true this will be rescheduled */ | 
|  | if (lr && !lr->processed) { | 
|  | pr_debug("Pending regulatory request, waiting for it to be processed...\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  |  | 
|  | if (list_empty(®_requests_list)) { | 
|  | spin_unlock(®_requests_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | reg_request = list_first_entry(®_requests_list, | 
|  | struct regulatory_request, | 
|  | list); | 
|  | list_del_init(®_request->list); | 
|  |  | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | notify_self_managed_wiphys(reg_request); | 
|  |  | 
|  | reg_process_hint(reg_request); | 
|  |  | 
|  | lr = get_last_request(); | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | if (!list_empty(®_requests_list) && lr && lr->processed) | 
|  | schedule_work(®_work); | 
|  | spin_unlock(®_requests_lock); | 
|  | } | 
|  |  | 
|  | /* Processes beacon hints -- this has nothing to do with country IEs */ | 
|  | static void reg_process_pending_beacon_hints(void) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct reg_beacon *pending_beacon, *tmp; | 
|  |  | 
|  | /* This goes through the _pending_ beacon list */ | 
|  | spin_lock_bh(®_pending_beacons_lock); | 
|  |  | 
|  | list_for_each_entry_safe(pending_beacon, tmp, | 
|  | ®_pending_beacons, list) { | 
|  | list_del_init(&pending_beacon->list); | 
|  |  | 
|  | /* Applies the beacon hint to current wiphys */ | 
|  | for_each_rdev(rdev) | 
|  | wiphy_update_new_beacon(&rdev->wiphy, pending_beacon); | 
|  |  | 
|  | /* Remembers the beacon hint for new wiphys or reg changes */ | 
|  | list_add_tail(&pending_beacon->list, ®_beacon_list); | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(®_pending_beacons_lock); | 
|  | } | 
|  |  | 
|  | static void reg_process_self_managed_hint(struct wiphy *wiphy) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | 
|  | const struct ieee80211_regdomain *tmp; | 
|  | const struct ieee80211_regdomain *regd; | 
|  | enum nl80211_band band; | 
|  | struct regulatory_request request = {}; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | lockdep_assert_wiphy(wiphy); | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | regd = rdev->requested_regd; | 
|  | rdev->requested_regd = NULL; | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | if (!regd) | 
|  | return; | 
|  |  | 
|  | tmp = get_wiphy_regdom(wiphy); | 
|  | rcu_assign_pointer(wiphy->regd, regd); | 
|  | rcu_free_regdom(tmp); | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) | 
|  | handle_band_custom(wiphy, wiphy->bands[band], regd); | 
|  |  | 
|  | reg_process_ht_flags(wiphy); | 
|  |  | 
|  | request.wiphy_idx = get_wiphy_idx(wiphy); | 
|  | request.alpha2[0] = regd->alpha2[0]; | 
|  | request.alpha2[1] = regd->alpha2[1]; | 
|  | request.initiator = NL80211_REGDOM_SET_BY_DRIVER; | 
|  |  | 
|  | if (wiphy->flags & WIPHY_FLAG_NOTIFY_REGDOM_BY_DRIVER) | 
|  | reg_call_notifier(wiphy, &request); | 
|  |  | 
|  | nl80211_send_wiphy_reg_change_event(&request); | 
|  | } | 
|  |  | 
|  | static void reg_process_self_managed_hints(void) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | guard(wiphy)(&rdev->wiphy); | 
|  |  | 
|  | reg_process_self_managed_hint(&rdev->wiphy); | 
|  | } | 
|  |  | 
|  | reg_check_channels(); | 
|  | } | 
|  |  | 
|  | static void reg_todo(struct work_struct *work) | 
|  | { | 
|  | rtnl_lock(); | 
|  | reg_process_pending_hints(); | 
|  | reg_process_pending_beacon_hints(); | 
|  | reg_process_self_managed_hints(); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void queue_regulatory_request(struct regulatory_request *request) | 
|  | { | 
|  | request->alpha2[0] = toupper(request->alpha2[0]); | 
|  | request->alpha2[1] = toupper(request->alpha2[1]); | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | list_add_tail(&request->list, ®_requests_list); | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | schedule_work(®_work); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Core regulatory hint -- happens during cfg80211_init() | 
|  | * and when we restore regulatory settings. | 
|  | */ | 
|  | static int regulatory_hint_core(const char *alpha2) | 
|  | { | 
|  | struct regulatory_request *request; | 
|  |  | 
|  | request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | 
|  | if (!request) | 
|  | return -ENOMEM; | 
|  |  | 
|  | request->alpha2[0] = alpha2[0]; | 
|  | request->alpha2[1] = alpha2[1]; | 
|  | request->initiator = NL80211_REGDOM_SET_BY_CORE; | 
|  | request->wiphy_idx = WIPHY_IDX_INVALID; | 
|  |  | 
|  | queue_regulatory_request(request); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* User hints */ | 
|  | int regulatory_hint_user(const char *alpha2, | 
|  | enum nl80211_user_reg_hint_type user_reg_hint_type) | 
|  | { | 
|  | struct regulatory_request *request; | 
|  |  | 
|  | if (WARN_ON(!alpha2)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!is_world_regdom(alpha2) && !is_an_alpha2(alpha2)) | 
|  | return -EINVAL; | 
|  |  | 
|  | request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | 
|  | if (!request) | 
|  | return -ENOMEM; | 
|  |  | 
|  | request->wiphy_idx = WIPHY_IDX_INVALID; | 
|  | request->alpha2[0] = alpha2[0]; | 
|  | request->alpha2[1] = alpha2[1]; | 
|  | request->initiator = NL80211_REGDOM_SET_BY_USER; | 
|  | request->user_reg_hint_type = user_reg_hint_type; | 
|  |  | 
|  | /* Allow calling CRDA again */ | 
|  | reset_crda_timeouts(); | 
|  |  | 
|  | queue_regulatory_request(request); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void regulatory_hint_indoor(bool is_indoor, u32 portid) | 
|  | { | 
|  | spin_lock(®_indoor_lock); | 
|  |  | 
|  | /* It is possible that more than one user space process is trying to | 
|  | * configure the indoor setting. To handle such cases, clear the indoor | 
|  | * setting in case that some process does not think that the device | 
|  | * is operating in an indoor environment. In addition, if a user space | 
|  | * process indicates that it is controlling the indoor setting, save its | 
|  | * portid, i.e., make it the owner. | 
|  | */ | 
|  | reg_is_indoor = is_indoor; | 
|  | if (reg_is_indoor) { | 
|  | if (!reg_is_indoor_portid) | 
|  | reg_is_indoor_portid = portid; | 
|  | } else { | 
|  | reg_is_indoor_portid = 0; | 
|  | } | 
|  |  | 
|  | spin_unlock(®_indoor_lock); | 
|  |  | 
|  | if (!is_indoor) | 
|  | reg_check_channels(); | 
|  | } | 
|  |  | 
|  | void regulatory_netlink_notify(u32 portid) | 
|  | { | 
|  | spin_lock(®_indoor_lock); | 
|  |  | 
|  | if (reg_is_indoor_portid != portid) { | 
|  | spin_unlock(®_indoor_lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | reg_is_indoor = false; | 
|  | reg_is_indoor_portid = 0; | 
|  |  | 
|  | spin_unlock(®_indoor_lock); | 
|  |  | 
|  | reg_check_channels(); | 
|  | } | 
|  |  | 
|  | /* Driver hints */ | 
|  | int regulatory_hint(struct wiphy *wiphy, const char *alpha2) | 
|  | { | 
|  | struct regulatory_request *request; | 
|  |  | 
|  | if (WARN_ON(!alpha2 || !wiphy)) | 
|  | return -EINVAL; | 
|  |  | 
|  | wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG; | 
|  |  | 
|  | request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); | 
|  | if (!request) | 
|  | return -ENOMEM; | 
|  |  | 
|  | request->wiphy_idx = get_wiphy_idx(wiphy); | 
|  |  | 
|  | request->alpha2[0] = alpha2[0]; | 
|  | request->alpha2[1] = alpha2[1]; | 
|  | request->initiator = NL80211_REGDOM_SET_BY_DRIVER; | 
|  |  | 
|  | /* Allow calling CRDA again */ | 
|  | reset_crda_timeouts(); | 
|  |  | 
|  | queue_regulatory_request(request); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(regulatory_hint); | 
|  |  | 
|  | void regulatory_hint_country_ie(struct wiphy *wiphy, enum nl80211_band band, | 
|  | const u8 *country_ie, u8 country_ie_len) | 
|  | { | 
|  | char alpha2[2]; | 
|  | enum environment_cap env = ENVIRON_ANY; | 
|  | struct regulatory_request *request = NULL, *lr; | 
|  |  | 
|  | /* IE len must be evenly divisible by 2 */ | 
|  | if (country_ie_len & 0x01) | 
|  | return; | 
|  |  | 
|  | if (country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) | 
|  | return; | 
|  |  | 
|  | request = kzalloc(sizeof(*request), GFP_KERNEL); | 
|  | if (!request) | 
|  | return; | 
|  |  | 
|  | alpha2[0] = country_ie[0]; | 
|  | alpha2[1] = country_ie[1]; | 
|  |  | 
|  | if (country_ie[2] == 'I') | 
|  | env = ENVIRON_INDOOR; | 
|  | else if (country_ie[2] == 'O') | 
|  | env = ENVIRON_OUTDOOR; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | lr = get_last_request(); | 
|  |  | 
|  | if (unlikely(!lr)) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * We will run this only upon a successful connection on cfg80211. | 
|  | * We leave conflict resolution to the workqueue, where can hold | 
|  | * the RTNL. | 
|  | */ | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && | 
|  | lr->wiphy_idx != WIPHY_IDX_INVALID) | 
|  | goto out; | 
|  |  | 
|  | request->wiphy_idx = get_wiphy_idx(wiphy); | 
|  | request->alpha2[0] = alpha2[0]; | 
|  | request->alpha2[1] = alpha2[1]; | 
|  | request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; | 
|  | request->country_ie_env = env; | 
|  |  | 
|  | /* Allow calling CRDA again */ | 
|  | reset_crda_timeouts(); | 
|  |  | 
|  | queue_regulatory_request(request); | 
|  | request = NULL; | 
|  | out: | 
|  | kfree(request); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void restore_alpha2(char *alpha2, bool reset_user) | 
|  | { | 
|  | /* indicates there is no alpha2 to consider for restoration */ | 
|  | alpha2[0] = '9'; | 
|  | alpha2[1] = '7'; | 
|  |  | 
|  | /* The user setting has precedence over the module parameter */ | 
|  | if (is_user_regdom_saved()) { | 
|  | /* Unless we're asked to ignore it and reset it */ | 
|  | if (reset_user) { | 
|  | pr_debug("Restoring regulatory settings including user preference\n"); | 
|  | user_alpha2[0] = '9'; | 
|  | user_alpha2[1] = '7'; | 
|  |  | 
|  | /* | 
|  | * If we're ignoring user settings, we still need to | 
|  | * check the module parameter to ensure we put things | 
|  | * back as they were for a full restore. | 
|  | */ | 
|  | if (!is_world_regdom(ieee80211_regdom)) { | 
|  | pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n", | 
|  | ieee80211_regdom[0], ieee80211_regdom[1]); | 
|  | alpha2[0] = ieee80211_regdom[0]; | 
|  | alpha2[1] = ieee80211_regdom[1]; | 
|  | } | 
|  | } else { | 
|  | pr_debug("Restoring regulatory settings while preserving user preference for: %c%c\n", | 
|  | user_alpha2[0], user_alpha2[1]); | 
|  | alpha2[0] = user_alpha2[0]; | 
|  | alpha2[1] = user_alpha2[1]; | 
|  | } | 
|  | } else if (!is_world_regdom(ieee80211_regdom)) { | 
|  | pr_debug("Keeping preference on module parameter ieee80211_regdom: %c%c\n", | 
|  | ieee80211_regdom[0], ieee80211_regdom[1]); | 
|  | alpha2[0] = ieee80211_regdom[0]; | 
|  | alpha2[1] = ieee80211_regdom[1]; | 
|  | } else | 
|  | pr_debug("Restoring regulatory settings\n"); | 
|  | } | 
|  |  | 
|  | static void restore_custom_reg_settings(struct wiphy *wiphy) | 
|  | { | 
|  | struct ieee80211_supported_band *sband; | 
|  | enum nl80211_band band; | 
|  | struct ieee80211_channel *chan; | 
|  | int i; | 
|  |  | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | sband = wiphy->bands[band]; | 
|  | if (!sband) | 
|  | continue; | 
|  | for (i = 0; i < sband->n_channels; i++) { | 
|  | chan = &sband->channels[i]; | 
|  | chan->flags = chan->orig_flags; | 
|  | chan->max_antenna_gain = chan->orig_mag; | 
|  | chan->max_power = chan->orig_mpwr; | 
|  | chan->beacon_found = false; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Restoring regulatory settings involves ignoring any | 
|  | * possibly stale country IE information and user regulatory | 
|  | * settings if so desired, this includes any beacon hints | 
|  | * learned as we could have traveled outside to another country | 
|  | * after disconnection. To restore regulatory settings we do | 
|  | * exactly what we did at bootup: | 
|  | * | 
|  | *   - send a core regulatory hint | 
|  | *   - send a user regulatory hint if applicable | 
|  | * | 
|  | * Device drivers that send a regulatory hint for a specific country | 
|  | * keep their own regulatory domain on wiphy->regd so that does | 
|  | * not need to be remembered. | 
|  | */ | 
|  | static void restore_regulatory_settings(bool reset_user, bool cached) | 
|  | { | 
|  | char alpha2[2]; | 
|  | char world_alpha2[2]; | 
|  | struct reg_beacon *reg_beacon, *btmp; | 
|  | LIST_HEAD(tmp_reg_req_list); | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | /* | 
|  | * Clear the indoor setting in case that it is not controlled by user | 
|  | * space, as otherwise there is no guarantee that the device is still | 
|  | * operating in an indoor environment. | 
|  | */ | 
|  | spin_lock(®_indoor_lock); | 
|  | if (reg_is_indoor && !reg_is_indoor_portid) { | 
|  | reg_is_indoor = false; | 
|  | reg_check_channels(); | 
|  | } | 
|  | spin_unlock(®_indoor_lock); | 
|  |  | 
|  | reset_regdomains(true, &world_regdom); | 
|  | restore_alpha2(alpha2, reset_user); | 
|  |  | 
|  | /* | 
|  | * If there's any pending requests we simply | 
|  | * stash them to a temporary pending queue and | 
|  | * add then after we've restored regulatory | 
|  | * settings. | 
|  | */ | 
|  | spin_lock(®_requests_lock); | 
|  | list_splice_tail_init(®_requests_list, &tmp_reg_req_list); | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | /* Clear beacon hints */ | 
|  | spin_lock_bh(®_pending_beacons_lock); | 
|  | list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  | spin_unlock_bh(®_pending_beacons_lock); | 
|  |  | 
|  | list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  |  | 
|  | /* First restore to the basic regulatory settings */ | 
|  | world_alpha2[0] = cfg80211_world_regdom->alpha2[0]; | 
|  | world_alpha2[1] = cfg80211_world_regdom->alpha2[1]; | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | if (rdev->wiphy.regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) | 
|  | continue; | 
|  | if (rdev->wiphy.regulatory_flags & REGULATORY_CUSTOM_REG) | 
|  | restore_custom_reg_settings(&rdev->wiphy); | 
|  | } | 
|  |  | 
|  | if (cached && (!is_an_alpha2(alpha2) || | 
|  | !IS_ERR_OR_NULL(cfg80211_user_regdom))) { | 
|  | reset_regdomains(false, cfg80211_world_regdom); | 
|  | update_all_wiphy_regulatory(NL80211_REGDOM_SET_BY_CORE); | 
|  | print_regdomain(get_cfg80211_regdom()); | 
|  | nl80211_send_reg_change_event(&core_request_world); | 
|  | reg_set_request_processed(); | 
|  |  | 
|  | if (is_an_alpha2(alpha2) && | 
|  | !regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER)) { | 
|  | struct regulatory_request *ureq; | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | ureq = list_last_entry(®_requests_list, | 
|  | struct regulatory_request, | 
|  | list); | 
|  | list_del(&ureq->list); | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | notify_self_managed_wiphys(ureq); | 
|  | reg_update_last_request(ureq); | 
|  | set_regdom(reg_copy_regd(cfg80211_user_regdom), | 
|  | REGD_SOURCE_CACHED); | 
|  | } | 
|  | } else { | 
|  | regulatory_hint_core(world_alpha2); | 
|  |  | 
|  | /* | 
|  | * This restores the ieee80211_regdom module parameter | 
|  | * preference or the last user requested regulatory | 
|  | * settings, user regulatory settings takes precedence. | 
|  | */ | 
|  | if (is_an_alpha2(alpha2)) | 
|  | regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER); | 
|  | } | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | pr_debug("Kicking the queue\n"); | 
|  |  | 
|  | schedule_work(®_work); | 
|  | } | 
|  |  | 
|  | static bool is_wiphy_all_set_reg_flag(enum ieee80211_regulatory_flags flag) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | guard(wiphy)(&rdev->wiphy); | 
|  |  | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | if (!(wdev->wiphy->regulatory_flags & flag)) | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | void regulatory_hint_disconnect(void) | 
|  | { | 
|  | /* Restore of regulatory settings is not required when wiphy(s) | 
|  | * ignore IE from connected access point but clearance of beacon hints | 
|  | * is required when wiphy(s) supports beacon hints. | 
|  | */ | 
|  | if (is_wiphy_all_set_reg_flag(REGULATORY_COUNTRY_IE_IGNORE)) { | 
|  | struct reg_beacon *reg_beacon, *btmp; | 
|  |  | 
|  | if (is_wiphy_all_set_reg_flag(REGULATORY_DISABLE_BEACON_HINTS)) | 
|  | return; | 
|  |  | 
|  | spin_lock_bh(®_pending_beacons_lock); | 
|  | list_for_each_entry_safe(reg_beacon, btmp, | 
|  | ®_pending_beacons, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  | spin_unlock_bh(®_pending_beacons_lock); | 
|  |  | 
|  | list_for_each_entry_safe(reg_beacon, btmp, | 
|  | ®_beacon_list, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | pr_debug("All devices are disconnected, going to restore regulatory settings\n"); | 
|  | restore_regulatory_settings(false, true); | 
|  | } | 
|  |  | 
|  | static bool freq_is_chan_12_13_14(u32 freq) | 
|  | { | 
|  | if (freq == ieee80211_channel_to_frequency(12, NL80211_BAND_2GHZ) || | 
|  | freq == ieee80211_channel_to_frequency(13, NL80211_BAND_2GHZ) || | 
|  | freq == ieee80211_channel_to_frequency(14, NL80211_BAND_2GHZ)) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan) | 
|  | { | 
|  | struct reg_beacon *pending_beacon; | 
|  |  | 
|  | list_for_each_entry(pending_beacon, ®_pending_beacons, list) | 
|  | if (ieee80211_channel_equal(beacon_chan, | 
|  | &pending_beacon->chan)) | 
|  | return true; | 
|  | return false; | 
|  | } | 
|  |  | 
|  | void regulatory_hint_found_beacon(struct wiphy *wiphy, | 
|  | struct ieee80211_channel *beacon_chan, | 
|  | gfp_t gfp) | 
|  | { | 
|  | struct reg_beacon *reg_beacon; | 
|  | bool processing; | 
|  |  | 
|  | if (beacon_chan->beacon_found || | 
|  | beacon_chan->flags & IEEE80211_CHAN_RADAR || | 
|  | (beacon_chan->band == NL80211_BAND_2GHZ && | 
|  | !freq_is_chan_12_13_14(beacon_chan->center_freq))) | 
|  | return; | 
|  |  | 
|  | spin_lock_bh(®_pending_beacons_lock); | 
|  | processing = pending_reg_beacon(beacon_chan); | 
|  | spin_unlock_bh(®_pending_beacons_lock); | 
|  |  | 
|  | if (processing) | 
|  | return; | 
|  |  | 
|  | reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); | 
|  | if (!reg_beacon) | 
|  | return; | 
|  |  | 
|  | pr_debug("Found new beacon on frequency: %d.%03d MHz (Ch %d) on %s\n", | 
|  | beacon_chan->center_freq, beacon_chan->freq_offset, | 
|  | ieee80211_freq_khz_to_channel( | 
|  | ieee80211_channel_to_khz(beacon_chan)), | 
|  | wiphy_name(wiphy)); | 
|  |  | 
|  | memcpy(®_beacon->chan, beacon_chan, | 
|  | sizeof(struct ieee80211_channel)); | 
|  |  | 
|  | /* | 
|  | * Since we can be called from BH or and non-BH context | 
|  | * we must use spin_lock_bh() | 
|  | */ | 
|  | spin_lock_bh(®_pending_beacons_lock); | 
|  | list_add_tail(®_beacon->list, ®_pending_beacons); | 
|  | spin_unlock_bh(®_pending_beacons_lock); | 
|  |  | 
|  | schedule_work(®_work); | 
|  | } | 
|  |  | 
|  | static void print_rd_rules(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | unsigned int i; | 
|  | const struct ieee80211_reg_rule *reg_rule = NULL; | 
|  | const struct ieee80211_freq_range *freq_range = NULL; | 
|  | const struct ieee80211_power_rule *power_rule = NULL; | 
|  | char bw[32], cac_time[32]; | 
|  |  | 
|  | pr_debug("  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)\n"); | 
|  |  | 
|  | for (i = 0; i < rd->n_reg_rules; i++) { | 
|  | reg_rule = &rd->reg_rules[i]; | 
|  | freq_range = ®_rule->freq_range; | 
|  | power_rule = ®_rule->power_rule; | 
|  |  | 
|  | if (reg_rule->flags & NL80211_RRF_AUTO_BW) | 
|  | snprintf(bw, sizeof(bw), "%d KHz, %u KHz AUTO", | 
|  | freq_range->max_bandwidth_khz, | 
|  | reg_get_max_bandwidth(rd, reg_rule)); | 
|  | else | 
|  | snprintf(bw, sizeof(bw), "%d KHz", | 
|  | freq_range->max_bandwidth_khz); | 
|  |  | 
|  | if (reg_rule->flags & NL80211_RRF_DFS) | 
|  | scnprintf(cac_time, sizeof(cac_time), "%u s", | 
|  | reg_rule->dfs_cac_ms/1000); | 
|  | else | 
|  | scnprintf(cac_time, sizeof(cac_time), "N/A"); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * There may not be documentation for max antenna gain | 
|  | * in certain regions | 
|  | */ | 
|  | if (power_rule->max_antenna_gain) | 
|  | pr_debug("  (%d KHz - %d KHz @ %s), (%d mBi, %d mBm), (%s)\n", | 
|  | freq_range->start_freq_khz, | 
|  | freq_range->end_freq_khz, | 
|  | bw, | 
|  | power_rule->max_antenna_gain, | 
|  | power_rule->max_eirp, | 
|  | cac_time); | 
|  | else | 
|  | pr_debug("  (%d KHz - %d KHz @ %s), (N/A, %d mBm), (%s)\n", | 
|  | freq_range->start_freq_khz, | 
|  | freq_range->end_freq_khz, | 
|  | bw, | 
|  | power_rule->max_eirp, | 
|  | cac_time); | 
|  | } | 
|  | } | 
|  |  | 
|  | bool reg_supported_dfs_region(enum nl80211_dfs_regions dfs_region) | 
|  | { | 
|  | switch (dfs_region) { | 
|  | case NL80211_DFS_UNSET: | 
|  | case NL80211_DFS_FCC: | 
|  | case NL80211_DFS_ETSI: | 
|  | case NL80211_DFS_JP: | 
|  | return true; | 
|  | default: | 
|  | pr_debug("Ignoring unknown DFS master region: %d\n", dfs_region); | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void print_regdomain(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | if (is_intersected_alpha2(rd->alpha2)) { | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { | 
|  | struct cfg80211_registered_device *rdev; | 
|  | rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx); | 
|  | if (rdev) { | 
|  | pr_debug("Current regulatory domain updated by AP to: %c%c\n", | 
|  | rdev->country_ie_alpha2[0], | 
|  | rdev->country_ie_alpha2[1]); | 
|  | } else | 
|  | pr_debug("Current regulatory domain intersected:\n"); | 
|  | } else | 
|  | pr_debug("Current regulatory domain intersected:\n"); | 
|  | } else if (is_world_regdom(rd->alpha2)) { | 
|  | pr_debug("World regulatory domain updated:\n"); | 
|  | } else { | 
|  | if (is_unknown_alpha2(rd->alpha2)) | 
|  | pr_debug("Regulatory domain changed to driver built-in settings (unknown country)\n"); | 
|  | else { | 
|  | if (reg_request_cell_base(lr)) | 
|  | pr_debug("Regulatory domain changed to country: %c%c by Cell Station\n", | 
|  | rd->alpha2[0], rd->alpha2[1]); | 
|  | else | 
|  | pr_debug("Regulatory domain changed to country: %c%c\n", | 
|  | rd->alpha2[0], rd->alpha2[1]); | 
|  | } | 
|  | } | 
|  |  | 
|  | pr_debug(" DFS Master region: %s", reg_dfs_region_str(rd->dfs_region)); | 
|  | print_rd_rules(rd); | 
|  | } | 
|  |  | 
|  | static void print_regdomain_info(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | pr_debug("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]); | 
|  | print_rd_rules(rd); | 
|  | } | 
|  |  | 
|  | static int reg_set_rd_core(const struct ieee80211_regdomain *rd) | 
|  | { | 
|  | if (!is_world_regdom(rd->alpha2)) | 
|  | return -EINVAL; | 
|  | update_world_regdomain(rd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int reg_set_rd_user(const struct ieee80211_regdomain *rd, | 
|  | struct regulatory_request *user_request) | 
|  | { | 
|  | const struct ieee80211_regdomain *intersected_rd = NULL; | 
|  |  | 
|  | if (!regdom_changes(rd->alpha2)) | 
|  | return -EALREADY; | 
|  |  | 
|  | if (!is_valid_rd(rd)) { | 
|  | pr_err("Invalid regulatory domain detected: %c%c\n", | 
|  | rd->alpha2[0], rd->alpha2[1]); | 
|  | print_regdomain_info(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!user_request->intersect) { | 
|  | reset_regdomains(false, rd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); | 
|  | if (!intersected_rd) | 
|  | return -EINVAL; | 
|  |  | 
|  | kfree(rd); | 
|  | rd = NULL; | 
|  | reset_regdomains(false, intersected_rd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int reg_set_rd_driver(const struct ieee80211_regdomain *rd, | 
|  | struct regulatory_request *driver_request) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd; | 
|  | const struct ieee80211_regdomain *intersected_rd = NULL; | 
|  | const struct ieee80211_regdomain *tmp = NULL; | 
|  | struct wiphy *request_wiphy; | 
|  |  | 
|  | if (is_world_regdom(rd->alpha2)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (!regdom_changes(rd->alpha2)) | 
|  | return -EALREADY; | 
|  |  | 
|  | if (!is_valid_rd(rd)) { | 
|  | pr_err("Invalid regulatory domain detected: %c%c\n", | 
|  | rd->alpha2[0], rd->alpha2[1]); | 
|  | print_regdomain_info(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | request_wiphy = wiphy_idx_to_wiphy(driver_request->wiphy_idx); | 
|  | if (!request_wiphy) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!driver_request->intersect) { | 
|  | ASSERT_RTNL(); | 
|  | scoped_guard(wiphy, request_wiphy) { | 
|  | if (request_wiphy->regd) | 
|  | tmp = get_wiphy_regdom(request_wiphy); | 
|  |  | 
|  | regd = reg_copy_regd(rd); | 
|  | if (IS_ERR(regd)) | 
|  | return PTR_ERR(regd); | 
|  |  | 
|  | rcu_assign_pointer(request_wiphy->regd, regd); | 
|  | rcu_free_regdom(tmp); | 
|  | } | 
|  |  | 
|  | reset_regdomains(false, rd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); | 
|  | if (!intersected_rd) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * We can trash what CRDA provided now. | 
|  | * However if a driver requested this specific regulatory | 
|  | * domain we keep it for its private use | 
|  | */ | 
|  | tmp = get_wiphy_regdom(request_wiphy); | 
|  | rcu_assign_pointer(request_wiphy->regd, rd); | 
|  | rcu_free_regdom(tmp); | 
|  |  | 
|  | rd = NULL; | 
|  |  | 
|  | reset_regdomains(false, intersected_rd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int reg_set_rd_country_ie(const struct ieee80211_regdomain *rd, | 
|  | struct regulatory_request *country_ie_request) | 
|  | { | 
|  | struct wiphy *request_wiphy; | 
|  |  | 
|  | if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && | 
|  | !is_unknown_alpha2(rd->alpha2)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* | 
|  | * Lets only bother proceeding on the same alpha2 if the current | 
|  | * rd is non static (it means CRDA was present and was used last) | 
|  | * and the pending request came in from a country IE | 
|  | */ | 
|  |  | 
|  | if (!is_valid_rd(rd)) { | 
|  | pr_err("Invalid regulatory domain detected: %c%c\n", | 
|  | rd->alpha2[0], rd->alpha2[1]); | 
|  | print_regdomain_info(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | request_wiphy = wiphy_idx_to_wiphy(country_ie_request->wiphy_idx); | 
|  | if (!request_wiphy) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (country_ie_request->intersect) | 
|  | return -EINVAL; | 
|  |  | 
|  | reset_regdomains(false, rd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Use this call to set the current regulatory domain. Conflicts with | 
|  | * multiple drivers can be ironed out later. Caller must've already | 
|  | * kmalloc'd the rd structure. | 
|  | */ | 
|  | int set_regdom(const struct ieee80211_regdomain *rd, | 
|  | enum ieee80211_regd_source regd_src) | 
|  | { | 
|  | struct regulatory_request *lr; | 
|  | bool user_reset = false; | 
|  | int r; | 
|  |  | 
|  | if (IS_ERR_OR_NULL(rd)) | 
|  | return -ENODATA; | 
|  |  | 
|  | if (!reg_is_valid_request(rd->alpha2)) { | 
|  | kfree(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (regd_src == REGD_SOURCE_CRDA) | 
|  | reset_crda_timeouts(); | 
|  |  | 
|  | lr = get_last_request(); | 
|  |  | 
|  | /* Note that this doesn't update the wiphys, this is done below */ | 
|  | switch (lr->initiator) { | 
|  | case NL80211_REGDOM_SET_BY_CORE: | 
|  | r = reg_set_rd_core(rd); | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_USER: | 
|  | cfg80211_save_user_regdom(rd); | 
|  | r = reg_set_rd_user(rd, lr); | 
|  | user_reset = true; | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_DRIVER: | 
|  | r = reg_set_rd_driver(rd, lr); | 
|  | break; | 
|  | case NL80211_REGDOM_SET_BY_COUNTRY_IE: | 
|  | r = reg_set_rd_country_ie(rd, lr); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "invalid initiator %d\n", lr->initiator); | 
|  | kfree(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (r) { | 
|  | switch (r) { | 
|  | case -EALREADY: | 
|  | reg_set_request_processed(); | 
|  | break; | 
|  | default: | 
|  | /* Back to world regulatory in case of errors */ | 
|  | restore_regulatory_settings(user_reset, false); | 
|  | } | 
|  |  | 
|  | kfree(rd); | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* This would make this whole thing pointless */ | 
|  | if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom())) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* update all wiphys now with the new established regulatory domain */ | 
|  | update_all_wiphy_regulatory(lr->initiator); | 
|  |  | 
|  | print_regdomain(get_cfg80211_regdom()); | 
|  |  | 
|  | nl80211_send_reg_change_event(lr); | 
|  |  | 
|  | reg_set_request_processed(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __regulatory_set_wiphy_regd(struct wiphy *wiphy, | 
|  | struct ieee80211_regdomain *rd) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd; | 
|  | const struct ieee80211_regdomain *prev_regd; | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | if (WARN_ON(!wiphy || !rd)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN(!(wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED), | 
|  | "wiphy should have REGULATORY_WIPHY_SELF_MANAGED\n")) | 
|  | return -EPERM; | 
|  |  | 
|  | if (WARN(!is_valid_rd(rd), | 
|  | "Invalid regulatory domain detected: %c%c\n", | 
|  | rd->alpha2[0], rd->alpha2[1])) { | 
|  | print_regdomain_info(rd); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | regd = reg_copy_regd(rd); | 
|  | if (IS_ERR(regd)) | 
|  | return PTR_ERR(regd); | 
|  |  | 
|  | rdev = wiphy_to_rdev(wiphy); | 
|  |  | 
|  | spin_lock(®_requests_lock); | 
|  | prev_regd = rdev->requested_regd; | 
|  | rdev->requested_regd = regd; | 
|  | spin_unlock(®_requests_lock); | 
|  |  | 
|  | kfree(prev_regd); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int regulatory_set_wiphy_regd(struct wiphy *wiphy, | 
|  | struct ieee80211_regdomain *rd) | 
|  | { | 
|  | int ret = __regulatory_set_wiphy_regd(wiphy, rd); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | schedule_work(®_work); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(regulatory_set_wiphy_regd); | 
|  |  | 
|  | int regulatory_set_wiphy_regd_sync(struct wiphy *wiphy, | 
|  | struct ieee80211_regdomain *rd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | ret = __regulatory_set_wiphy_regd(wiphy, rd); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* process the request immediately */ | 
|  | reg_process_self_managed_hint(wiphy); | 
|  | reg_check_channels(); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(regulatory_set_wiphy_regd_sync); | 
|  |  | 
|  | void wiphy_regulatory_register(struct wiphy *wiphy) | 
|  | { | 
|  | struct regulatory_request *lr = get_last_request(); | 
|  |  | 
|  | /* self-managed devices ignore beacon hints and country IE */ | 
|  | if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) { | 
|  | wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS | | 
|  | REGULATORY_COUNTRY_IE_IGNORE; | 
|  |  | 
|  | /* | 
|  | * The last request may have been received before this | 
|  | * registration call. Call the driver notifier if | 
|  | * initiator is USER. | 
|  | */ | 
|  | if (lr->initiator == NL80211_REGDOM_SET_BY_USER) | 
|  | reg_call_notifier(wiphy, lr); | 
|  | } | 
|  |  | 
|  | if (!reg_dev_ignore_cell_hint(wiphy)) | 
|  | reg_num_devs_support_basehint++; | 
|  |  | 
|  | wiphy_update_regulatory(wiphy, lr->initiator); | 
|  | wiphy_all_share_dfs_chan_state(wiphy); | 
|  | reg_process_self_managed_hints(); | 
|  | } | 
|  |  | 
|  | void wiphy_regulatory_deregister(struct wiphy *wiphy) | 
|  | { | 
|  | struct wiphy *request_wiphy = NULL; | 
|  | struct regulatory_request *lr; | 
|  |  | 
|  | lr = get_last_request(); | 
|  |  | 
|  | if (!reg_dev_ignore_cell_hint(wiphy)) | 
|  | reg_num_devs_support_basehint--; | 
|  |  | 
|  | rcu_free_regdom(get_wiphy_regdom(wiphy)); | 
|  | RCU_INIT_POINTER(wiphy->regd, NULL); | 
|  |  | 
|  | if (lr) | 
|  | request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); | 
|  |  | 
|  | if (!request_wiphy || request_wiphy != wiphy) | 
|  | return; | 
|  |  | 
|  | lr->wiphy_idx = WIPHY_IDX_INVALID; | 
|  | lr->country_ie_env = ENVIRON_ANY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * See FCC notices for UNII band definitions | 
|  | *  5GHz: https://www.fcc.gov/document/5-ghz-unlicensed-spectrum-unii | 
|  | *  6GHz: https://www.fcc.gov/document/fcc-proposes-more-spectrum-unlicensed-use-0 | 
|  | */ | 
|  | int cfg80211_get_unii(int freq) | 
|  | { | 
|  | /* UNII-1 */ | 
|  | if (freq >= 5150 && freq <= 5250) | 
|  | return 0; | 
|  |  | 
|  | /* UNII-2A */ | 
|  | if (freq > 5250 && freq <= 5350) | 
|  | return 1; | 
|  |  | 
|  | /* UNII-2B */ | 
|  | if (freq > 5350 && freq <= 5470) | 
|  | return 2; | 
|  |  | 
|  | /* UNII-2C */ | 
|  | if (freq > 5470 && freq <= 5725) | 
|  | return 3; | 
|  |  | 
|  | /* UNII-3 */ | 
|  | if (freq > 5725 && freq <= 5825) | 
|  | return 4; | 
|  |  | 
|  | /* UNII-5 */ | 
|  | if (freq > 5925 && freq <= 6425) | 
|  | return 5; | 
|  |  | 
|  | /* UNII-6 */ | 
|  | if (freq > 6425 && freq <= 6525) | 
|  | return 6; | 
|  |  | 
|  | /* UNII-7 */ | 
|  | if (freq > 6525 && freq <= 6875) | 
|  | return 7; | 
|  |  | 
|  | /* UNII-8 */ | 
|  | if (freq > 6875 && freq <= 7125) | 
|  | return 8; | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bool regulatory_indoor_allowed(void) | 
|  | { | 
|  | return reg_is_indoor; | 
|  | } | 
|  |  | 
|  | bool regulatory_pre_cac_allowed(struct wiphy *wiphy) | 
|  | { | 
|  | const struct ieee80211_regdomain *regd = NULL; | 
|  | const struct ieee80211_regdomain *wiphy_regd = NULL; | 
|  | bool pre_cac_allowed = false; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | regd = rcu_dereference(cfg80211_regdomain); | 
|  | wiphy_regd = rcu_dereference(wiphy->regd); | 
|  | if (!wiphy_regd) { | 
|  | if (regd->dfs_region == NL80211_DFS_ETSI) | 
|  | pre_cac_allowed = true; | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return pre_cac_allowed; | 
|  | } | 
|  |  | 
|  | if (regd->dfs_region == wiphy_regd->dfs_region && | 
|  | wiphy_regd->dfs_region == NL80211_DFS_ETSI) | 
|  | pre_cac_allowed = true; | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return pre_cac_allowed; | 
|  | } | 
|  | EXPORT_SYMBOL(regulatory_pre_cac_allowed); | 
|  |  | 
|  | static void cfg80211_check_and_end_cac(struct cfg80211_registered_device *rdev) | 
|  | { | 
|  | struct wireless_dev *wdev; | 
|  | unsigned int link_id; | 
|  |  | 
|  | guard(wiphy)(&rdev->wiphy); | 
|  |  | 
|  | /* If we finished CAC or received radar, we should end any | 
|  | * CAC running on the same channels. | 
|  | * the check !cfg80211_chandef_dfs_usable contain 2 options: | 
|  | * either all channels are available - those the CAC_FINISHED | 
|  | * event has effected another wdev state, or there is a channel | 
|  | * in unavailable state in wdev chandef - those the RADAR_DETECTED | 
|  | * event has effected another wdev state. | 
|  | * In both cases we should end the CAC on the wdev. | 
|  | */ | 
|  | list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) { | 
|  | struct cfg80211_chan_def *chandef; | 
|  |  | 
|  | for_each_valid_link(wdev, link_id) { | 
|  | if (!wdev->links[link_id].cac_started) | 
|  | continue; | 
|  |  | 
|  | chandef = wdev_chandef(wdev, link_id); | 
|  | if (!chandef) | 
|  | continue; | 
|  |  | 
|  | if (!cfg80211_chandef_dfs_usable(&rdev->wiphy, chandef)) | 
|  | rdev_end_cac(rdev, wdev->netdev, link_id); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void regulatory_propagate_dfs_state(struct wiphy *wiphy, | 
|  | struct cfg80211_chan_def *chandef, | 
|  | enum nl80211_dfs_state dfs_state, | 
|  | enum nl80211_radar_event event) | 
|  | { | 
|  | struct cfg80211_registered_device *rdev; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (WARN_ON(!cfg80211_chandef_valid(chandef))) | 
|  | return; | 
|  |  | 
|  | for_each_rdev(rdev) { | 
|  | if (wiphy == &rdev->wiphy) | 
|  | continue; | 
|  |  | 
|  | if (!reg_dfs_domain_same(wiphy, &rdev->wiphy)) | 
|  | continue; | 
|  |  | 
|  | if (!ieee80211_get_channel(&rdev->wiphy, | 
|  | chandef->chan->center_freq)) | 
|  | continue; | 
|  |  | 
|  | cfg80211_set_dfs_state(&rdev->wiphy, chandef, dfs_state); | 
|  |  | 
|  | if (event == NL80211_RADAR_DETECTED || | 
|  | event == NL80211_RADAR_CAC_FINISHED) { | 
|  | cfg80211_sched_dfs_chan_update(rdev); | 
|  | cfg80211_check_and_end_cac(rdev); | 
|  | } | 
|  |  | 
|  | nl80211_radar_notify(rdev, chandef, event, NULL, GFP_KERNEL); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init regulatory_init_db(void) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * It's possible that - due to other bugs/issues - cfg80211 | 
|  | * never called regulatory_init() below, or that it failed; | 
|  | * in that case, don't try to do any further work here as | 
|  | * it's doomed to lead to crashes. | 
|  | */ | 
|  | if (!reg_fdev) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = load_builtin_regdb_keys(); | 
|  | if (err) { | 
|  | faux_device_destroy(reg_fdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* We always try to get an update for the static regdomain */ | 
|  | err = regulatory_hint_core(cfg80211_world_regdom->alpha2); | 
|  | if (err) { | 
|  | if (err == -ENOMEM) { | 
|  | faux_device_destroy(reg_fdev); | 
|  | return err; | 
|  | } | 
|  | /* | 
|  | * N.B. kobject_uevent_env() can fail mainly for when we're out | 
|  | * memory which is handled and propagated appropriately above | 
|  | * but it can also fail during a netlink_broadcast() or during | 
|  | * early boot for call_usermodehelper(). For now treat these | 
|  | * errors as non-fatal. | 
|  | */ | 
|  | pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Finally, if the user set the module parameter treat it | 
|  | * as a user hint. | 
|  | */ | 
|  | if (!is_world_regdom(ieee80211_regdom)) | 
|  | regulatory_hint_user(ieee80211_regdom, | 
|  | NL80211_USER_REG_HINT_USER); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #ifndef MODULE | 
|  | late_initcall(regulatory_init_db); | 
|  | #endif | 
|  |  | 
|  | int __init regulatory_init(void) | 
|  | { | 
|  | reg_fdev = faux_device_create("regulatory", NULL, NULL); | 
|  | if (!reg_fdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom); | 
|  |  | 
|  | user_alpha2[0] = '9'; | 
|  | user_alpha2[1] = '7'; | 
|  |  | 
|  | #ifdef MODULE | 
|  | return regulatory_init_db(); | 
|  | #else | 
|  | return 0; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | void regulatory_exit(void) | 
|  | { | 
|  | struct regulatory_request *reg_request, *tmp; | 
|  | struct reg_beacon *reg_beacon, *btmp; | 
|  |  | 
|  | cancel_work_sync(®_work); | 
|  | cancel_crda_timeout_sync(); | 
|  | cancel_delayed_work_sync(®_check_chans); | 
|  |  | 
|  | /* Lock to suppress warnings */ | 
|  | rtnl_lock(); | 
|  | reset_regdomains(true, NULL); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | dev_set_uevent_suppress(®_fdev->dev, true); | 
|  |  | 
|  | faux_device_destroy(reg_fdev); | 
|  |  | 
|  | list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { | 
|  | list_del(®_beacon->list); | 
|  | kfree(reg_beacon); | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { | 
|  | list_del(®_request->list); | 
|  | kfree(reg_request); | 
|  | } | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(regdb)) | 
|  | kfree(regdb); | 
|  | if (!IS_ERR_OR_NULL(cfg80211_user_regdom)) | 
|  | kfree(cfg80211_user_regdom); | 
|  |  | 
|  | free_regdb_keyring(); | 
|  | } |