net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present
The driver is currently checking for PHYCR2 register presence in
rtl8211f_config_init(), but it does so after accessing PHYCR2 to
disable EEE. This was introduced in commit bfc17c165835 ("net:
phy: realtek: disable PHY-mode EEE"). Move the PHYCR2 presence
test before the EEE disablement and simplify the code.
Fixes: bfc17c165835 ("net: phy: realtek: disable PHY-mode EEE")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251011110309.12664-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 82d8e133..a724b21 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -633,26 +633,25 @@ static int rtl8211f_config_init(struct phy_device *phydev)
str_enabled_disabled(val_rxdly));
}
+ if (!priv->has_phycr2)
+ return 0;
+
/* Disable PHY-mode EEE so LPI is passed to the MAC */
ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR2,
RTL8211F_PHYCR2_PHY_EEE_ENABLE, 0);
if (ret)
return ret;
- if (priv->has_phycr2) {
- ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE,
- RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN,
- priv->phycr2);
- if (ret < 0) {
- dev_err(dev, "clkout configuration failed: %pe\n",
- ERR_PTR(ret));
- return ret;
- }
-
- return genphy_soft_reset(phydev);
+ ret = phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE,
+ RTL8211F_PHYCR2, RTL8211F_CLKOUT_EN,
+ priv->phycr2);
+ if (ret < 0) {
+ dev_err(dev, "clkout configuration failed: %pe\n",
+ ERR_PTR(ret));
+ return ret;
}
- return 0;
+ return genphy_soft_reset(phydev);
}
static int rtl821x_suspend(struct phy_device *phydev)
